Rezervoar

Fruehauf Bitumen tank inox 31 m3 / 1 comp + mixer & engine

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2026, skupna širina: 2.550 mm, skupna višina: 1.350 mm, Leto izdelave: 2025, Oprema: ABS, Container Chassis 20FT: Fifth Wheel Height: 1180 mm (unladen, air-suspended tractor unit) Suitable for transporting containers: - 1 x 20FT ISO - 1 x 20FT (7150) swap body - 1 x 20FT (7450) swap body - 1 x 20FT (7820) swap body Three-axle SAF INTRA DISC PLUS SBS2220 axle assembly, with disc brakes (large discs 430 mm). INTRA air suspension with steel spring brackets. The axles are air-suspended, with axle 1 as a lift axle, automatically controlled via EBS. 6 aluminium rims U 22.5 x 11.75 - brand TIA - polished finish - ET 120 mm EBS system WABCO EBS-E, type 2S/2M (ABS on 1 axle), with RSS system (roll stability) and pneumatic parking brake on 2 axles, compliant with regulations. Tyre pressure monitoring system WABCO OptiTire (TPMS) JOST MODUL B landing gear, fitted with plates and oscillating feet (S), load capacity 2x12,000 kg, operated mechanically 1 PVC toolbox (1,040x490x480 mm), mounted on the right Stainless steel drip tray with removable aluminium cover plate. Next to the drip tray, on both sides, a working platform covered with aluminium safety grating. Left and right behind the 20FT connection, above the third axle, an aluminium catwalk. Between the longitudinal beams, 2 pieces PE pipe sleeves, @ 160 mm, length 6,200 mm, with PE end caps at the front. At the rear, the hose pipes are fitted with separate lockable stainless steel covers (dia 160 mm). Nkedpfx Ajyqiy Tsb Uow At the rear, 1 foldable ADR sign. Vehicle designation according to ADR: EX/II + EX/III + FL + AT Container: Type: CIMC Longitudinal Swap Body Tank (CLS) Capacity: 35,000 litres Tare weight: 4,130 kg Operating pressure (max.): 3.0 bar Test pressure: 4.5 bar Temperature range: −40°C to +130°C Approvals: IMO Type 4, RID/ADR-L4BH, UIC, TIR, CSC Shell: 1.4402 (316L), 3.2 mm, 2B finish Ends: 1.4402 (316L), 4.2 mm, hot-rolled, polished Baffle plates: 4× vertical, CVC-shaped, corrugated, 70% welded Internal finish: degreased, pickled, passivated, neutralised Ladder: stainless steel, rear right, theft-proof Walkway: aluminium, non-slip, 475 mm, with cross steps Handrail: foldable, telescopic, theft-proof Stacking: up to triple stacking Manhole: Ø500 mm, 316 stainless steel, 8-point, EPDM/PTFE Inspection: 3× Ø300 mm, 316 stainless steel, 4-point Safety valve: 3", stainless steel, 3.75 bar, without flame arrester, with bursting disc & pressure gauge Air line: 1.5", with ball, safety & check valves, pressure gauge operable from below Vacuum valve: 2" BSP, −0.21 bar Bottom valve: 3", with cable remote closure Steam heating: 8 longitudinal runs, 1" BSP, 3 bar Thermometer: analogue, −40°C to +160°C Insulation: - 50 mm rock wool (tank & ends) - PU foam under stainless steel bands Cladding: - Shell: 4× 1.8 mm GRP panels Markings: 3× holders for Edgar Weber folding plates, 1× Kemmler bracket Subject to prior sale and errors! Sale exclusively according to our Terms and Conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some of these may be caused by transmission errors in the systems of various platform providers. We therefore point out that all information is supplied without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer under §145 BGB. Rather, it is information intended to initiate a contract. The details provided here are non-binding and do not constitute guaranteed characteristics.