Tovorno vozilo za posebne namene

UNIMOG Unimog U219

Mercedes-Benz Unimog U219 ---- Internal No.:
Internal No.:

Vehicle data:

Mercedes-Benz Unimog
Type: U219
Mileage: 20,043 km

Equipment:

* Paint 2603 deep orange
* Tires 315/80 R 22.5# TL Regio drive axle "L"
* Axle ratio i = 6.527
* Differential lock on front axle
* Trailer brake, 2-line system
* Rear mounting brackets
* Wheelbase 2,800 mm
* Front mounting plate DIN 76060, type B, size 3
* VarioPilot (right/left steering changeover)
* Side protection device
* Pneumatic suspension seat, passenger side
* Air suspension seat with seat heating, driver side
* Additional multifunction stalk, left, universal holder for control unit
* Air conditioning
* Activated carbon filter
* Constant power sockets 12V (C3), 12V and 24V in the center console
* On-board power socket 24V/25A in cab, with C3 signal
* Rear-view camera
* Alternator 28 V / 150 A
* ABS trailer socket 24V, 7-pin / 5-pin
* Front socket 24V, 7-pin
* External sun visor, transparent
* EasyDrive Automatic Shift (EAS)
* Hydraulics for tipping system
* Hydraulic lines, 2-circuit, dual cell, fully prop., for snow plow relief
* Hydraulic connector at rear, 4-way, cell 1+2
* Pressure line rear, 2nd hydraulic circuit
* Separate return line rear
* Instrument cluster, 12.7 cm, with video function
* Digital tachograph, 2nd generation, ADR
* Tachograph manufacturer VDO
* Pre-installation for warning beacon for telescopic cylinder
* Radio, with USB connection and Bluetooth
* Pre-installation for Truck Data Center 6 (FB Card)
* AdBlue tank 16 l
* Additional headlights, height-adjustable, A-pillar
* Mounting base left and right for rotating beacon
* Engine OM934, R4, 5.1 l, 140 kW (190 hp), 750 Nm
* High Performance Engine Brake
* Engine PTO including front PTO
* PTO speed limitation
* Tow hitch, large jaw type, ring eye, 38.5 mm bolt
* Tubeless shoulder rims 9.00x22.5
* Warning stripes red/white, retro-reflective
* Weight version additional 10.0 t

* Dücker UNA 450 boom for front mounting on DIN vehicle plate size 3 or 5, incl. sliding frame, working range: right, left and in front of the vehicle, working width from vehicle center with mower head 5.40 m, without drive and controls

* Electrohydraulic proportional CAN-bus control, incl. integrated display for operating and displaying all necessary functions. Setting and reading of operation and diagnostics pages with Danfoss joystick (roller joystick)

* Drive for attachments integrated into basic vehicle, driven via front PTO. Equipped with an axial piston high-pressure pump with a capacity of 47 l/min at 320 bar pressure at a PTO input speed of 650 rpm including driveshaft, front PTO position offset above center

* Counterweight "spreader version" suitable for Unimog mounting brackets - weight mounted below behind the axle - (From 1,800 kg including support to cross member)

* Counterweight 650 kg "spreader version" with recess for spreader disc, dimensions: 1150 x 730 x 140 mm

Isdpfx Aeuy R Hyob Hjtd
* Flail mower head VMS 1200 for UNA, working width 1.23 m, right side operation, left side drive with high-pressure hydraulic motor, incl. toothed belt drive, convertible from right to left side operation, maintenance-free sensing roller. The mower head is equipped with a replaceable plastic wear liner. A supporting tube adjustable over the entire width with additional support is installed. Equipped with flat flails 945 000 900

* Dücker TR torsion frame hydraulically prevents vehicle warping (for Unimog), lockable from the cab. Central lubrication point

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.