Kosilnica

Pöttinger Novacat V10

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 11.300 h, moč: 93 kW (126,44 KM), Oprema: klimatska naprava, Deutz Tractor MK3 120 Agrotron Klsdpfovzlx Nox Ahksr 120 HP Year of manufacture: 2000 Hours: 11,300 Rear tires as new New technical inspection (TÜV) 50 km/h version, can also be restricted to 40 km/h

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Kedpfx Aomfqi Ishkslr Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: rabljeno, Leto izdelave: 2008, Quick blade change / Klodpfot A Smxjx Ahker

Stanje: rabljeno, Leto izdelave: 2008, Unladen weight: 1966 Kledpfx Ahoqrrq Hoker

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 5.377 h, moč: 597 kW (811,69 KM), Oprema: kabina, klimatska naprava, pogon na vsa štiri kolesa, JOHN DEERE 7950i ProDrive FIN: Z07950Y510262 Leto proizvodnje: 2009 - Prva registracija: 18.05.2009 Radni sati motora: 5.377 h - Sati bubnja: 3.023 h Automatska klima Priprema za GPS sistem upravljanja Radio sa USB-om Klodpfx Ahsx Hmt Roksr Grejanje sedišta Kamera za vožnju unazad 40 km/h Centralni sistem podmazivanja Automatska vučna kuka Adapter za kukuruz tip 195-390-JD78 sa transportnom osovinom PickUp tip 630 B Zadnje gume 600/65 R28 Šara: cca 80% - 52 mm Prednje gume 800/65 R32 Šara: cca 60% - 32 mm Promene, međuprodaja i greške izričito su zadržane. Opis služi opštoj identifikaciji vozila i ne predstavlja garanciju u pravnom smislu kupovine. Presudan je opis prema kupoprodajnom ugovoru. Naša ponuda je generalno bez novog tehničkog pregleda (TÜV). Ako je potreban novi tehnički pregled, rado ćemo Vam dati ponudu naših partnerskih radionica! Vozilo može biti oblepljeno reklamama i/ili natpisima. Primjenjuju se naši opšti uslovi isporuke i plaćanja.

Stanje: rabljeno, Leto izdelave: 2008, DISCO 3100 F PROFIL Rabljena sprednja kosilnica Claas v seriji Kardanska gred Mehansko razbremenjevanje Klsdox R Iphspfx Ahksr

Stanje: rabljeno, Leto izdelave: 2018, Oprema: je imel nesrečo, kabina, ref: 250274 ! Damaged Equipment / Matériel accidenté / Verunglücktes Material ! Reference: 250274 Type: FRONT MOWER Brand / Model: KRONE EASY CUT F 320 Year: 2018 Comment: CUTTERBAR DAMAGED ! Damaged Equipment ! - Accident details: Impact with fixed object Damaged equipment sold as is, sale exclusively to professionals or for export. Klsdpsxg R Upofx Ahksr ! Please note: Vehicles are sold without any warranty, trade-in, exchange, return, refund, or claim after the sale! * Sale price excludes VAT. Delivery possible at additional cost. More information and photos available on our website! Please book an appointment so we can receive you under the best conditions! Our company specializes in buying and selling and has a machinery yard of over 100,000 m² south of Strasbourg. We have more than 350 items in stock, including construction equipment, material handling, agricultural machinery, trucks, passenger cars, and vans—a constantly renewed stock every month. We look forward to welcoming you at 17 Route d’Eschau, 67400 ILLKIRCH-GRAFFENSTADEN. *Description subject to errors Working width: 3m Delivery time (in days): 1

Stanje: rabljeno, Leto izdelave: 2013, DISCO 3900 CONTOUR 010 Rabljena Claas Disco 3900 Contour 020 Zadnja diskasta kosilnica 030 Delovna širina 3,80 m 040 8 kosilnih diskov z 2 nožema vsak 050 Hidravlično zlaganje Kljdpfxoxfc A Ne Ahkor