Drugi

Greifschaufel 2,00m

Stanje: rabljeno, Leto izdelave: 1999, Payload: 19,990 kg Gbsdpfsutw I Nsx Afzeg Gross vehicle weight (GVW): 8,010 kg Front tire condition: 70% Rear tire condition: 70% Front tires: 245/70 R 17.5 Rear tires: 245/70 R 17.5 For further information, please contact PFEIFER GROUP.

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete selection of vehicles with immediately and short-term available units can be found on our website. Extract from the equipment. Complete equipment details available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * approx. 2,100 mm = raised front platform incl. gooseneck, front corners chamfered * approx. 5,350 mm = low-bed platform – flat loading area * approx. 850 mm = rear drive-on slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Load height when loaded approx. 870 mm * When operating as a combination, ensure legal overall height and length limits are observed! Frame: * Steel welded construction with front gooseneck and chamfered rear * Drive-on slope with central excavator bucket recess = indentation at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing bars (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out approx. 10 t lashing rings (4x in the low-bed, 1x at the drive-on slope, 2x on the raised platform) * Standard ball race turntable Frame attachments: * Both sides of the low-bed platform with extendable extensions with softwood planks approx. 50 mm (track width of construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings. Distribution: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair to the very rear in the excavator bucket recess left and right; 1 pair at the front of the raised platform before the gooseneck, inside the longitudinal beams; 1 pair at the rear of the low-bed before the drive-on slope, in the bucket recess left and right. Draw device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing mount, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-bed axles with drum brakes * Axle load capacity 11 t/axle * S-cam brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 pcs. tyres 235/75 R 17.5, 141J, brand by factory choice * 12 pcs. steel rims 6.75 x 17.5, with offset, silver Brake system/Suspension: * Dual-line air brake system according to ECE regulation R13 * Brake system by Wabco * EBS system 4S3M, sensing on 1st + 2nd axle * RSS/RSP – Stability Program * Spring-loaded parking brake on 2nd + 3rd axles * Steel air tanks * Brake/air connecting lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Elastics as holder for EBS and electrical plugs * Air suspension with lifting and lowering facility (rear axles only), automatic ride height adjustment from 15 km/h (RTR), axle stop on front axle Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 – 10 mm above the upper frame edge * Steel checker plate covers above wheels Ramps: * 2 pcs. foldable single-section lightweight steel drive-on ramps, length approx. 2,800 mm, width approx. 750 mm, with hardwood floor approx. 35 mm, impregnated * Ramps adjustable in width from intermediate gap approx. 350 mm to max. overall width approx. 3,000 mm * Ramps can be locked in driving position by chains with tensioner Gbjdpowx Dcyjfx Afzsg * Ramp lifting aid with spiral spring * Ramps can be moved manually sideways with

Stanje: rabljeno, številka stroja/vozila: GE12/084/2023, lastna masa: 7.000 kg, največja dovoljena obremenitev: 17.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/1998, vzmetenje: jeklo, Oprema: osrednja vrtljiva plošča, Vehicle from 1st owner Goldhofer TU3-24/80 Low loader Service history maintained Inspection book Hydraulic ramps Payload – 17,000 kg Lashing eyes in the loading area Commercial/export net price – €9,990 Subject to alterations, prior sale, and errors excepted. Godpomx U Dpjfx Afzjbg ===== Telephone Mobile =====

Stanje: rabljeno, lastna masa: 8.400 kg, največja dovoljena obremenitev: 15.600 kg, skupna masa: 24.000 kg, prva registracija: 08/1993, naslednji pregled (TÜV): 10/2022, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 9.5R 17.5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 9.5R 17.5, velikost zadnje pnevmatike: 9.5R 17.5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Kontaktna oseba prodaja: Frank Rau / ruščina / angleščina / nemščina - Bachar Ibrahim / arabščina / angleščina / nemščina - Registracijska storitev, HU/SP/UVV, prevoz do pristanišča Zelo dolga nakladalna površina. 10,00 m! Hidravlične rampe Stanje: pripravljen za uporabo Gedpfxjww Dwho Afzebg Razširljiv Sivo-črna Dodatna oprema ABS, vrtljiva plošča, zračna zavora, EBS, zračno vzmetenje, cena na zahtevo (Mobile), Vzmetenje: zrak, Nosilnost (kg): 15600 Tip nadgradnje: razširljiv, vrhunsko stanje, 10,00 m nakladalne površine, HSN/TSN: 6631/000 Pridržujemo si pravico do napak.

Stanje: rabljeno, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2008, Leto izdelave: 2008, Oprema: ABS, * Müller Miteltal T 30.0 Compact * Year of manufacture: 2008 * Leaf suspension * Payload: 24,000 kg * Ramps * 3 axles Gbjdpfx Aouz I Rrsfzog Internal reference number: 24A039

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000 kg / 30,000 kg Tare weight: 5,600 kg Payload: 18,400 kg / 24,400 kg Overall length: 10,290 mm Loading length: 5,900 mm incl. rear bevel Width: 2,520 mm Loading height: 860 mm Additional Information: plus freight/preparation from storage location 26639 Wiesmoor €1,280.00 / net Gbsdpfewm Uy Eex Afzeg Low loader trailer chassis Steel welded construction Turntable with heavy-duty ball race Foldable rear supports Wheel chocks with holder Full-width rear mud flaps 1 plastic toolbox Prepared for width extensions up to 3,000 mm (holes in the outer frame with covers, not in the rear bevel) Lashing eyes for low loader 1 pair of lashing cutouts embedded at the front in the longitudinal beam at the gooseneck, each for 10 t 7 pairs of lashing mushrooms recessed on top and on the sides of the outer frame, each for 10 t • 1x at the front on the gooseneck • 5x in the low-bed area • 1x in rear bevel 12 pairs of lashing holes in the outer frame, each for 5 t (for tensioning strap hooks) • 5x gooseneck, 6x low-bed, 1x rear bevel Drawbar turntable coupling Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Laser aligned axles/chassis – reduces tyre and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Wheels and Tyres 235/75 R 17.5" Manufacturer’s choice Steel twin rims, factory silver Brake System 2-line pneumatic braking system Spring-actuated parking brake 2 foolproof coupling heads at the front with connecting lines to the towing vehicle, lines extended by approx. 60 cm Without ABS, but with mechanical ALB; max. 60 km/h permit Electrics 12 Volt, multi-chamber lights, without side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marking lights at the rear 1 x 7-pin 12 Volt plug at the front with connection cable, extended by approx. 60 cm 1 LED beacon with holder, switched via parking light (removable light) Floor Gooseneck at the front with steel/tread plate covering Storage box recessed in overrun slope to gooseneck Then with 70 mm softwood floor, steel/tread plate covering in wheel arch area Rear bevel with 70 mm softwood floor Low-bed area incl. rear bevel: 5,900 mm Access ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wooden covering (tip area with steel/tread plate) Hydraulic via tractor PTO with throttle, control on left side in front area Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operating Notes An exemption is required for axle loads of 10,000 kg; only indivisible loads allowed! The stated total weight is technically possible. Depending on the load, the total weight may not be achievable while observing the permissible axle, support, and kingpin loads. (Poor handling and tracking may result from incorrect load distribution.) Country of Registration / License plates Country of registration: Germany With DEKRA inspection and certificate for max. 60 km/h approval, towing vehicle agricultural/forestry (LoF) (Approval in Switzerland max. 40 km/h possible) Prepared for two-line license plate holder Without contour marking / reflective stripes as per ECE R 048 Paintwork Frame: RAL 6013 reed green "10-year anti-perforation warranty" Drawbar galvanized Access ramps hot-dip galvanized

Stanje: novo, številka stroja/vozila: b50cac2c60a813b0968994fa0, lastna masa: 5.700 kg, največja dovoljena obremenitev: 18.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Full-width rear mudflap Preparation for widening to 3,000 mm (holes in outer frame, not in rear bevel) Low-loader lashing rings 1 pair of lashing cutouts embedded in the front longitudinal beam at the gooseneck, each rated for 10 t 7 pairs of lashing mushroom pins embedded on top and side of the outer frame, each rated for 10 t 1 x on the front gooseneck 5 x in the low-bed area 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated for 5 t (for lashing strap hooks) Gbodsi Ri Agjpfx Afzeg 5 x at the gooseneck, 6 x in the low-bed area, and 1 x in the rear bevel Drawbar system for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles, brand as per manufacturer’s choice Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5 Fulda Steel rims in twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 unmistakable coupling heads at the front, with connecting lines to the truck, Connecting lines extended by approx. 60 cm No ABS, but with mechanical ALB (automatic load-dependent brake valve), thus maximum 60 km/h permit Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 7-pin 12 Volt plug at the front with connecting cable, extended by approx. 60 cm 1 LED beacon with holder, operated via parking light (lamp removable) 2 pairs of illuminated and extendable warning plates up to 3,000 mm Floor Front gooseneck with steel/chequer plate covering Toolbox recessed in the drive-over slant to gooseneck Following area with 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-bed loading area including rear bevel: 5,900 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wooden covering Spring-assisted lifting Operating Instructions For axle loads of 10,000 kg, an exemption permit is required; only indivisible loads permitted!!! The stated total weight is technically possible; depending on the load, the total weight may not be achievable within the allowable axle/support and fifth wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle as agricultural/forestry vehicle (LoF), (for Switzerland, max. 40 km/h possible) Prepared for double-line license plate holder No contour markings / reflective tape according to ECE R 048 Painting Frame: DB 7350 Novagrau 10-year corrosion protection warranty Drawbar galvanized or black, according to manufacturer’s choice Loading ramps hot-dip galvanized Note: Archive images!