Polpriklopnik z nizkim nakladalnikom

Faymonville 5-A-Tele-Semi-Halbachsen-Twinaxle-Rampen

Gooseneck:
- Gooseneck in SNT design for optimizing loading deck length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10°

Loading Deck:
- Sliding loading deck with Super-Grip rubber covering over the axles, approx. 9,400 mm long with rear bevel approx. 500 mm x 10°
- One recess in the deck and extended into the bevel to accommodate the excavator’s stick, approx. 3950 x 780 x 370/450 mm
- Pneumatic locking system with conical locking bolt and reinforced locking positions

Axles and Tyres:
- TWINAXLE II type half-axles, independent wheel suspension, 1st axle self-steered, all other axles hydro-mechanically forced steered
- 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Hydraulic cylinders with shut-off valves
- Tyres: 245/70 R 17.5 3PMSF twin tyres

Two-part Steel Ramps:
- One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide
- With Super-Grip rubber covering
- Hydraulic foldable ramp tips
- Ramps can be hydraulically adjusted approx. 235 mm outwards and approx. 215 mm inwards separately

Full Metallization:
- Complete HRM metallization (High Resistance Metallisation)
- Entire steel construction shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Accessories:
- Plug-in steel front wall, approx. 400 mm high
- 1 one-piece stainless steel toolbox, approx. 2,480 x 340 x 390 mm
- Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917)
- 3 kW electro-hydraulic unit for hydraulic operations (except hydraulic winches)
- 1 spare wheel
- On the gooseneck, 1 pair of plug-in aluminium side boards, approx. 400 mm high, anodised
- On the gooseneck, 1 plug-in aluminium rear board, approx. 400 mm high, anodised
- Approx. 40 mm hardwood covering on the gooseneck, checker plate covering over the king pin
- Gooseneck guide plate for fifth wheel plate, approx. 500 mm wide
- 4 wheel chocks
- Mechanical landing legs with 2-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- On the loading deck, approx. 50 mm hardwood covering, checker plate over axles
- Loading deck locking with conically welded locking profiles every 250 mm, incl. pre-load plate
- 1 sliding intermediate table, approx. 300 mm wide
Pgsdpfxet Dpiyj Af Neu
- Extendable deck wideners, approx. 230 mm per side
- 1 pair of hydraulic rear outriggers
- Central lubrication system
- Wired remote control via push buttons, with axle tracking control
- Radio remote control
- "Super Grip" 25 mm rubber floor and steel plate floor
- Square climbing strips 20 x 30 mm
- WABCO Smart Board system
- Square climbing strips 20 x 30 mm, approx. every 200 mm on ramp outer frame
- 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 position lights and brackets for beacon

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.