Tehnologija gnojevke

Kotte Tankanhänger TAV 26

Stanje: rabljeno, Leto izdelave: 2023, Suction hose system Perrot, Ø150 mm, 5m Jurop vacuum compressor PNR 155 (15,200 ltr) plastic mudguards for agricultural use. Professional filling aid NW 200 front / swivel element rear. Wedge flange slide valve 6 inch left front, wedge flange slide valve 6 inch right front. Mounting bracket for Doder T Rfrepfx Ahcjck

Stanje: novo, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.850 mm, skupna širina: 2.250 mm, skupna višina: 2.500 mm, Leto izdelave: 2024, WS Trucks GmbH: Your Reliable Partner for Commercial Vehicles Expertise and Service from a Single Source WS Trucks GmbH is your reliable partner for buying and selling commercial vehicles. With over 25 years of experience, we offer a comprehensive selection of used and new trucks, livestock transporters, refrigerated vehicles, trailers, and semi-trailers. ---- WST Edition A Livestock Trailer 2,700 kg ---- Technical Data • Internal length: 4,000 mm • Internal width: approx. 1,850 mm • Permissible total weight: 3,500 kg • Axle design: single axle • Axle spacing: 850 mm • Type approval: 100 km/h • Version: WST Edition 1850 Fixed Chassis & Technology • V-drawbar for 3,500 kg permissible total weight Dodpfstit Nvox Ahcsck • Shock absorbers • Industrial spare wheel • Tyres: 195/70 R15 C • 100 km/h approval • Aluminium tread plate mudguards • Gas struts on the rear flap (3 pcs) Body & Floor • Fully welded, longitudinally laid, special aluminium floor • Drain on the right with disease control lip • Aluminium side walls, 1,900 mm high • Rear flap, 1,500 mm high • Rear flap with bayonet lock • Rubber mat with rubber strips on the rear flap Interior Fittings & Ventilation • Swinging aluminium partition, 1,400 mm high • Ventilation flaps with grilles (9 pcs total): o 1 × in front o 2 × at the top o 2 × at the bottom o 1 additional flap per side above each mudguard • Swing grate above the loading ramp • Tie bar in the front Configuration, Lighting & Fittings • Access door on the left in direction of travel • Transverse partition, aluminium, movable with perforated rails o Version: closed o Height: 1,500 mm • LED interior floodlights at the rear (2 pcs) o With external on/off switch • LED reversing lights (2 pcs) • Insulated aluminium roof ---- Our Service for You: * Individual advice: We take time to understand your needs and find the right vehicle for you. * Financing: We arrange favorable financing options and leasing terms. * Trade-in: We offer fair valuation and accept your used vehicle in part exchange. * Registration & Deregistration: We handle the entire registration of your new vehicle and deregistration of your old one. * Complete export processing: We take care of all customs formalities. * Maintenance & repair: Our professional workshop will look after the maintenance and repair of your vehicle. Your Advantage: * Expertise: We are commercial vehicle experts and know the market inside out. * Reliability: We keep our promises and support you every step of the way. * Service: We offer comprehensive all-in-one service. * Quality: We only offer high-quality vehicles from reputable manufacturers. Our Core Competency: Livestock and Meat Transport Vehicles: * Comprehensive know-how: We understand the specific requirements for livestock and meat transport and offer expert advice in choosing the right vehicle. * Wide selection: We offer a broad range of vehicles from various manufacturers and price segments. * Quality: We only offer high-quality vehicles from reputable manufacturers. * Comprehensive service: We provide complete service from advice and financing to maintenance and repair. ---- Krone Trailer Partner WS Trucks GmbH is a Krone Trailer Partner. As a Krone Trailer Partner, we offer a large selection of new and used Krone semi-trailers. Menke-Janzen Par

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign Dodpfx Asi Dwlwshcjck - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6 tyres, size 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Dcsdpfx Ajhlz Shjhcek Landing gear: JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer High-quality, single-colour 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic paint finish possible Included accessories: At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles Electro-hydraulic unit 4 wheel chocks with brackets on the front wall 2" kingpin A galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised front terminal board White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear European reflective plates (red-yellow) on the rear of the trailer One mud flap on the rear of the trailer Manual and documentation Bracket for a revolving warning light at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor set in omega profiles 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right-hand side in the driving direction 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container 5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump Red/white reflective tape on the extension of the loading platform On the central beam,

Stanje: rabljeno, Leto izdelave: 2023, delovna širina: 9 mm, Oprema: zavorni sistem na stisnjen zrak,

Stanje: rabljeno, lastna masa: 5.800 kg, največja dovoljena obremenitev: 17.200 kg, konfiguracija osi: 3 osi, prva registracija: 04/1984, vzmetenje: jeklo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Trososni priklopnik cisterna iz nerjavečega jekla - Proizvajalec: T + A Beckum - Prva registracija: 24.04.1984 - Število osi: 3 - Vzmetenje: listnato - Tip osi: BPW - Zavore: bobnaste - Dolžina: 10.300 mm - Širina: 2.500 mm - Višina: 3.250 mm - Lastna teža: 5.800 kg - Proizvajalec nadgradnje: T+A Beckum - Material cisterne: nerjaveče jeklo - Skupna prostornina cisterne: 18.390 l - Komore cisterne: 3 - Izolirana Dcsdjxtupwopfx Ahcsk

Stanje: rabljeno, največja dovoljena obremenitev: 24.000 kg, prva registracija: 01/2016, velikost pnevmatike: 385/65/22,5, Leto izdelave: 2016, Ogled je možen samo po predhodnem dogovoru. Interna št. 1496 Dvosmerni kiper, iztovor na levo v smeri vožnje / zadaj Vzmetenje: • 1. os: zračno vzmetenje • 2. os: zračno vzmetenje Dcedpoziq Hqefx Ahcsk • 3. os: zračno vzmetenje Zavorni sistem: • 1. os: bobnasta zavora • 2. os: bobnasta zavora • 3. os: bobnasta zavora s tlačno zračno vzmetjo Dvižna os: • 1. os: ne • 2. os: ne • 3. os: ne Opremljenost pnevmatik: • 1. os: posamezno kolo • 2. os: posamezno kolo • 3. os: posamezno kolo • Velikost pnevmatik: 385/65/22,5 • Globina profila: 40 % • Vrsta platišča: jeklo Dodatna oprema • Lastna teža: 6.220 kg • Nosilnost: 17.780 kg • Nakladalna površina: 18,16 m² • Nakladalni volumen: 32,7 m³ • ABS • EBS • Število osi: 3 • Proizvajalec osi: BPW • Levi portal • Odstranljive stranice • Drsna cerada • 1 drsnik • Dolžinsko nastavljive škarje Notranje mere nakladalnega prostora (pribl.): • Dolžina: 7354 mm • Širina: 2471 mm • Višina: 1782 mm Vmesna prodaja, napake in tipkarske napake so pridržane.

Stanje: rabljeno, Leto izdelave: 2023,

Stanje: rabljeno, Leto izdelave: 2021, IsoBus Load-Sensing additional control panel for knife group switching Dodjt N T Auepfx Ahcock

Stanje: rabljeno, Leto izdelave: 2024, Oprema: zavorni sistem na stisnjen zrak,