Prikolica s standardno nadgradnjo

MAX Trailer 3-(1+2)-Achs-Anhänger-hydr. Rampen

Loading Platform:
Cranked loading platform with rear chamfer approx. 500 mm x 8°
4 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
2 pairs of flat-mounted lashing rings at the front in the platform (LC 5,000 daN)
1 pair of flat-mounted lashing rings at the front in the platform (LC 10,000 daN)
Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
Hardwood floor approx. 48 mm thick, over the axles with chequer plate covering

Axles and Tyres:
BPW axles, air-suspended, with drum brakes, lifting/lowering function
Axle tools
Tires 245/70 R 17.5 3PMSF
Load index (146/146F)

One-piece Steel Ramps:
One pair of galvanized one-piece steel ramps approx. 3,000 x 800 mm with approx. 48 mm thick hardwood surface
Ramp with hydraulic lifting mechanism and hydraulic transverse adjustment
Maximum load per pair: 40,000 kg

Braking System:
Braking system according to EU regulations with EBS-E (2S2M) and EBS coiled cable for the tractor unit

Steel Structure:
Steel structure made of high-strength fine-grained steels
Pgjdpfx Aer E Uw Rjf Nsu
Steel grades:
∗∗S355J2+N/S355MC (Yield strength 355MPa)
∗∗S690QL/S700MC (Yield strength 690MPa)

Paintwork:
First-class, durable corrosion protection of the standard shot-blasted welded frame secured by a 2-component (2K) zinc-dust primer
High-quality single-color 2-component (2K) topcoat in Novagrau
Rear section metallized and painted in RAL 9010 (Pure White)
No metallic paint possible

Electrical System:
Electrical system according to EU regulations, 24 Volt lighting
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX with 24N, 24S, & 15-pin sockets
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098

Included Accessories:
Turntable with a +/- 1,750 mm long tow bar, with a towing eye (diameter 40 mm)
Coupling height 830-1,010 mm when loaded
Spiral cables 15/2x7-pin
Yellow-red air couplings
One mud flap at the rear of the trailer
Manual and description on USB stick
Bracket for beacon light at the rear of the trailer
European reflective plates (red-yellow) at the rear of the trailer
Yellow reflective tape according to EU regulations at the sides and rear
Control valves for the ramps installed on the right side of the trailer
Galvanized supports under the rear chamfer of the loading platform
Truck hydraulic connection with flow regulator
Cover plates for bridging the gap between ramps and platform
One INOX toolbox 1,350 x 400 x 400 mm centrally at the front
Galvanized extensions, extendable by approx. 230 mm per side
Four warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, each fitted with a position light
Bracket for beacon light on the warning boards
60 km/h speed sticker at the rear
HRM metallization (High Resistance Metallization) of the outer frame
Complete steel structure shot-blasted, then all specified visible areas metallized and finished hot with ZINACOR 850 (Zinc 85% - Aluminium 15%)

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.