Polpriklopnik s ploščadjo

Meusburger 3-Achs-Mega-Tele-Plateau-nlla

Chassis:
- Welded steel frame construction – lightweight design
- Neck height approx. 110 mm
- Outer frame closed to the outside
- Vehicle with extendable central frame, telescopic up to 7,000 mm (permissible with steering trailing axle up to a maximum of 4,000 mm), pneumatic locking every 500 mm
- Fifth wheel plate 8 mm with replaceable 2'' king pin
- Frame reinforcement for point load of 25 tons over 3 m in retracted position
- Load-bearing outer frame
- Rear chamfer 500 x 100 mm
- Front installation dimension aligned with front corner dimension 2,040 mm
- Underride protection = extended end plate
- Hook-in rail at rear on end plate
- Rear drop-down landing gears

Landing gears:
- Mechanical 24 ton landing gears with single-side operation and load equalizing

Axles:
- BPW air suspension axles, 10 ton axle load each, air spring diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- WABCO SmartBoard with lift and lower function, total stroke approx. 200 mm
- 3rd axle as friction-steered trailing axle with electrical and mechanical lock

Rims and Tires:
- 13 steel disc wheels, 10-hole, offset, center guided
- 13 tires 235/75 R17.5 tubeless

Mudguards:
- Sheet metal mudguards with splash flaps

Brake system:
- Two-line brake system with EBS
- EBS (WABCO 4S3M)
- Aluminum air tanks
- Spring-actuated parking brake
- Yellow/red air supply connectors

Floor:
- 50 mm hardwood floor, protruding approx. 5 mm above frame profiles

Front wall:
- 25 mm aluminum hollow sections, 2,000 mm high, bolted, two supports
- 2 lashing eyes for front wall bracing according to DIN EN 12642 (5,000 daN)

Paintwork:
- Steel grit cleaning, chassis including telescopic primed with spray-galvanizing
- Chassis and wheel hubs in MB 7350 nova grey
- Outer frame and front wall in MB 7350 nova grey
- Reflective tape on the sides and rear in yellow

Accessories:
- Side underrun protection
Kjdpfxjrx N Dvo Ab Uefa
- 4 wheel chocks
- 1 spare wheel holder (side-mounted)
- Elongated license plate bracket in underrun protection
- 2 ECE warning boards
- 3 pairs of standard lashing rings recessed into side of outer frame, installed on front platform, lashing capacity 4 tons each
- 9 pairs of heavy-duty lashing rings (foldable), lashing capacity 8 tons each
- 1 pair installed at the end of the front platform and 8 pairs in the rear platform
- 6 pairs of mushroom lashing points on side of outer frame, 24 mm bar thickness for lashings
- 8 pairs of stake pockets on side of outer frame for plug-in stakes size 100x50 mm
- 3 rows of transverse stake pockets for 100x50 mm stakes (1x in king pin area max. 100 mm deep, 1x in front of axle unit, 1x behind axle unit – transverse orientation: 100 mm lengthwise, 50 mm crosswise)
- Storage compartment for stakes in front of front wall (= stake pockets in floor)
- Extendable warning plates including position lights, at front landing gear and behind end plate, infinitely extendable up to loading width of 4,500 mm, with 3-pin socket and removable spiral cable
- 1 PVC toolbox 630x400x450 mm
- Container locks for 2 x 20 ft and 1 x 40 ft containers

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.