Nizki nakladalnik

GVN Trailer 2 Axle Hydraulic Platform Lowloader

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) Nlodpog Sk T Dsfx Ab Dsg 6 pairs of stake pockets for plug-in stakes

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 137.500 km, moč: 154,45 kW (209,99 KM), število postelj: 2, število sedežev: 3, vrsta goriva: dizel, vrsta prenosa: mehanski, barva: originalen, prva registracija: 04/1995, proizvajalec šasij: IVECO, model šasije: EUROCARGO, skupna dolžina: 7.300 mm, skupna širina: 2.500 mm, skupna višina: 3.650 mm, konfiguracija osi: 4x4, kapaciteta rezervoarja za gorivo: 200 l, skupna masa: 10.500 kg, lastna masa: 7.500 kg, položaj volana: levo, velikost pnevmatike: 365/80 R20, Leto izdelave: 2019, Oprema: celoletne pnevmatike, dodatne luči, enojna postelja, enoposteljne postelje, klimatska naprava, kopalnica, markiza, meglenke, navigacijski sistem, parkirni grelec, parkirni senzorji, pogon na vsa štiri kolesa, pogradi, popolna servisna zgodovina, prha, registracija vozila, servovolan, sončna elektrarna, spojka prikolice, vgradna kuhinja, vozilo za nekadilce, zapora diferenciala, Po naročilu izdelan in popolnoma opremljen ekspedicijski tovornjak. Nsdpfjx N E T Iox Ab Dolg

Stanje: novo, lastna masa: 5.500 kg, skupna masa: 19.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 11.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.100 mm, vzmetenje: zrak, velikost pnevmatike: 215 75 17,5, Oprema: žerjav, *KALEPAR TRAILER - KLP 119V2 TRUCK TRANSPORTER* - 1x 9 ton SAF or BPW axles - 100% galvanized - GVW: - Unladen weight: approx. 5500 kg - Wabco 2S-2M EBS braking system - Aspöck 24V electrical system - EU standard - Air suspension - Hydraulic cable winch Hammerwinch 8t with radio remote control (Teleradio) - Full-width hydraulic rear extension: 2550 mm wide, 1500 mm long - Length: 11,800 mm - Length with extension: 13,300 mm - Width: 2,550 mm - Fifth-wheel height: approx. 1,050 mm – 1,150 mm (other heights available) - Tire brands: Goodyear, Pirelli, or Continental, dual tires - Spare wheel with mounting bracket - 24V 4.5kW electro-hydraulic motor for the winch, tail lift, and rear extension - Customizations possible upon customer request - Choice of paint color – free of charge Nljdpfxskqmuus Ab Deg - All necessary documents (COC, TÜV, etc.) for registration available For more info: *Pictures are examples. No copyright claimed.*

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.800 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/1998, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, Leto izdelave: 1998, Oprema: ABS, Bertoja extendable low loader, 3 axles with 2nd and 3rd self-steering axles, air suspension, ABS, year 1998, cradle length 5.30m with an additional 3.50m extension, ground clearance 45cm, removable module above the axles, adjustable detachable gooseneck, wired remote control for steering self-steering axles, good condition. DEALER: INTERDRIVE SRL - PARMA. Nledpfewg E Rbsx Ab Dog

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2000, Leto izdelave: 2000, Oprema: ABS, zadnja dolžina: 2,70 m Nledozx Nf Dopfx Ab Djg notranja dolžina: 6,10 m sprednja dolžina: 3,80 m skupna dolžina: 12,60 m

Stanje: novo, lastna masa: 1.300 kg, skupna masa: 3.000 kg, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 2.300 mm, Leto izdelave: 2025, Prosim, dogovorite si termin za ogled za nakup na kraju samem ali naročite neposredno preko naše spletne trgovine trailershop. Nljdpfx Aoxn Up Tjb Dsg PON. – PET. od 08:00 do 12:30 in od 14:00 do 18:00 ali kadar koli preko naše spletne trgovine trailershop. Vsebina in slike so avtorsko zaščitene – logotipi zaščiteni z blagovno znamko 10/25. Slike in vse navedene informacije so nezavezujoče, cena ne vključuje tovora. Močne blagovne znamke pri ANHÄNGERWIRTZ že več kot 34 let. Na zalogi je več kot 850 prikolic, dodatna oprema naprodaj; servis za Anssems – Brian James Trailers – Blyss – Brenderup – Böckmann – Cheval Liberté – Debon – Eduard – HULCO – HENRA – Koch – Martz – Neptun – SARIS – Tomplan – Trailershop – Variant – WM Meyer in še veliko več... Prodajna cena za novo blago z garancijo, z možnostjo prikaza DDV-ja. Dostava po vsej državi in v BENELUX. Možen je izvoz v EU po neto ceni in carinjenje (prosimo povprašajte). Razprodaja 10/25.

Stanje: novo, največja dovoljena obremenitev: 44.000 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Nljdsv D Abtopfx Ab Djg

Stanje: novo, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 2.300 mm, Sales Trailer Fanshop Merchandise VHSP 520 black The object shown here is an example of our work and has already been delivered to the customer. As a specialist vehicle manufacturer focusing on custom builds, we design, plan, and construct vehicles according to YOUR specifications. Dimensions, add-ons, interior fittings, color scheme, and technical features can all be tailored to your needs. Questions about feasibility? Send us your list of requirements or a simple sketch and you will receive a detailed quotation with individual pricing. For inquiries, please use 0388. Technical Specifications: * Permissible total weight: 2,500 kg * Internal dimensions: 520 x 220 x 230 cm (LxWxH) * Exterior and interior walls in high-gloss black with black profiles * Chassis: tandem axle, steel/galvanized with 4x extendable support legs, rubber-sprung axles * 13-inch tires * Automatic reverse and jockey wheel Nlodpfxov Tt Ipj Ab Dsg * Body: polyester sandwich panels (UV-resistant), insulated panel construction * Walls and ceiling approx. 33 mm thick * Sales hatch on the right-hand side (in direction of travel) * Entrance door at the front via drawbar * 2x wall ventilators * 230V/CEE connection * 4x LED light strips along the entire length * Power sockets distributed throughout the interior * Electrically operated advertising front along the full length, controlled by internal switch * Bag shelf * Interior fittings for merchandise sales: counter and wall-mounted work surface with intermediate shelf, partitions and anti-slip edges * Shelf above sales hatch * Glass top with payment rail above sales counter The images may not correspond to the standard specification; technical modifications (e.g. tire sizes) are subject to change.

Stanje: novo, lastna masa: 11.000 kg, skupna masa: 68.000 kg, konfiguracija osi: > 3 osi, vzmetenje: zrak, Leto izdelave: 2025, Oprema: ABS, GVN prikolica 4-osovinski standardni niskopodni model. Nljdpfxeqxbape Ab Dsg Za više informacija molimo kontaktirajte nas.

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel Njdpfshlz S Nox Ab Dolg • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)