Prekucnik

Cheval Liberté CHEVAL LIBERTE PW0LUX 1500kg 250x155x30cm Rückwärtskipper

Stanje: novo, lastna masa: 600 kg, največja dovoljena obremenitev: 1.400 kg, skupna masa: 2.000 kg, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.550 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 155r13c, Rear tipper from manufacturer Cheval Liberté, also known as Debon. Kedpfx Absfr Uw Te Ujfa The high-bed rear tipper, with its foldable and removable side panels, can be easily loaded from the side or the rear using a forklift or by hand. The load can be tipped out of this tipping trailer via an electro-hydraulic system. This car trailer is equipped with foldable and removable aluminium side panels, steel floor, electro-hydraulic tipping system with battery, automatic jockey wheel, lashing eyes, welded hot-dip galvanized chassis, and a V-drawbar. Optional accessories such as mesh sides, side extensions, tarpaulin with frame, flat cover, net, battery charger, and support legs are available at extra cost. --- All our competitively priced offers can also be found on our homepage. --- Nationwide delivery within Germany (except islands) available! Feel free to ask us for a quote. --- PKW-Trailer Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday – hours Saturday pick-up is not possible!

Stanje: novo, lastna masa: 380 kg, največja dovoljena obremenitev: 1.120 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.710 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 195/50r10 c, barva: srebrn, Oprema: nalagalnik, Why buy used when new is already so affordable? Huge selection of immediately available hydraulic tippers at unbeatable prices! Secure your price advantage now – come by, purchase, and "take it with you immediately." This hydraulic tipper delivers optimal work facilitation for firewood, stones, gravel, sand, garden soil, construction waste, etc. New design now with low-frame chassis and bolted V-drawbar for a low loading height. Kjdpfx Abjpgpnwj Ujfa Technical data: Permissible total weight: 1500 kg Payload: 1120 kg Unladen weight: 380 kg Load area length: approx. 271 cm Load area width: approx. 151 cm Load area height: 33 cm Tyres: 10" on 5-bolt rims Body and equipment: New: equipped with robust, galvanized, one-piece steel floor – rot-proof, no wooden layer required Manual hydraulic tipping with hand pump 25 mm thick, anodized aluminum drop sides 4 sides foldable and removable V-drawbar with overrun brake and automatic reverse function Braked, galvanized, maintenance-free rubber suspension axle Reinforced jockey wheel Coupling with safety indicator 13-pin plug with reversing light Smooth-action, internal latches 4 lashing rings Tailgate, rear-opening Lighting bar with protected multi-chamber lights 2 wheel chocks Plus delivery charge & vehicle documents Images may show optional equipment! Optional accessories at extra cost: Shock absorber kit for 100km/h, steel mesh extension approx. 60 cm, cover net + net hooks – Also available with 13-inch wheels on request Numerous other models, including rear and three-way tippers, available in our showroom Visit our exhibition area in the Fulda district of Bernhards, just 1 km from the A7—exactly between Kassel and Würzburg, directly on the B27 – Sundays are viewing days! – – Stop by and take a look! – National delivery available at extra cost Despite the greatest care, listing errors cannot be excluded. We do not guarantee the accuracy of the equipment details. Errors and prior sale excepted.

Stanje: novo, lastna masa: 475 kg, največja dovoljena obremenitev: 1.025 kg, skupna masa: 1.500 kg, dolžina tovornega prostora: 2.680 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,2 m³, barva: drugo, gradbena višina: 980 mm, delovna širina: 1.640 mm, Manufacturer: Humbaur Model: Rear Tipper HUK 152715 Permissible total weight: 1,500 kg Payload: 1,025 kg Unladen weight: 475 kg Body dimensions: 2,680 x 1,500 x 300 mm Tyres: 13 inch Loading height: 670 mm Loading area hydraulically tiltable via hand pump Tilt angle: 45° with 600 mm sheet metal side extension, all sides pendulously hinged - Chassis and tipping bridge welded and hot-dip galvanized - Galvanized bridge floor (2 mm) - V-groove outer frame with 3 pairs of recessed lashing rings - 300 mm drop sides, foldable on all sides - 13-pin plug and reversing lights - Tie rod locks - Conical corner stanchions - Automatic jockey wheel - Humbaur multifunction lighting integrated in underrun protection - 3-stage telescopic cylinder - Hand pump Kodji Dp U Rjpfx Ab Uefa Price includes vehicle registration certificate (part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we will provide you with a free temporary registration plate. We repair trailers of all makes. Additional accessories available upon request. Technical changes, price changes, and errors reserved. No liability for errors or misprints. Reverse automatics, rubber-sprung axle, independent wheel suspension, tiltable platform, automatic jockey wheel, marker lights, galvanized bridge floor (2 mm), braked, includes warranty, chassis and tipping bridge welded and hot-dip galvanized, V-groove outer frame with 3 pairs of recessed lashing rings, 300 mm drop sides foldable all round, 13-pin plug and reversing light, tie rod locks, conical corner stanchions, Humbaur multifunction lighting integrated in underrun protection, 3-stage telescopic cylinder, hand pump.

Stanje: novo, največja dovoljena obremenitev: 1.154 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.560 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, EDUARD 1526-J-72 REAR TIPPER WITH HAND PUMP TECHNICAL DATA: * Trailer type: EDUARD 1526-J-72 Rear Tipper with Hand Pump * Gross vehicle weight: 1,500 kg * Payload capacity: 1,154 kg * Internal dimensions (L x W x H): 256 cm x 150 cm x 30 cm * External dimensions (L x W x H): 384 cm x 156 cm x 97 cm * Loading height: approx. 72 cm * Floor: fully steel sheeted * Lashing points per side: 4 * Side panels: aluminium * Frame: hot-dip galvanized by immersion * Electrical system: 13-pin, 12V * Tyres: 185/70R13 * Axle manufacturer: AL-KO or KNOTT * Number of axles: 1 Kedothkgfepfx Ab Uofa * Braked axle * Automatic jockey wheel * Ball coupling * Side board locks: steel * Hydraulic system: pump operated manually Plus vehicle registration certificate / COC (Certificate of Conformity) documentation: €39.00 All prices include VAT. Visit us also at Opening hours Reichertshofen: Monday to Friday: 8:00 a.m. – 12:00 p.m. and 1:00 p.m. – 5:00 p.m. Closed on Saturdays and Sundays ===== You can also order your custom trailer and accessories by arrangement at: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: ----- B L Y S S transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: ===== Images may differ from standard equipment. Technical modifications (e.g. tyre size) subject to change without notice.

Stanje: novo, lastna masa: 400 kg, največja dovoljena obremenitev: 1.100 kg, skupna masa: 1.500 kg, dolžina tovornega prostora: 2.300 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1 m³, barva: drugo, gradbena višina: 950 mm, delovna širina: 1.540 mm, Manufacturer: Humbaur Model: Rear tipper HUK 152314 Permissible total weight: 1500 kg Payload: 1100 kg Unladen weight: 400 kg Body dimensions: 2300 x 1400 x 300 mm Tyres: 13 inch Loading height: 640 mm Loading area hydraulically tiltable by hand pump Tipping angle 45° V-drawbar combined with longitudinal frame, fully hot-dip galvanized Chassis and tipper body, fully hot-dip galvanized – Tipper body made from one-piece steel 3-stage hard chrome tipping cylinder 13-pin plug and reversing lights Sidewalls made from anodized aluminum with recessed locks, fully detachable 4 tie-down rings mounted on the platform floor, traction force 800 kg per ring, Dekra certified Jockey wheel Humbaur multifunctional lighting integrated in the underrun protection Price includes vehicle registration certificate (Registration Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Free temporary license plate available upon request Ksdpfx Aberazl Sj Uofa We repair trailers of all manufacturers Additional accessories available on request Technical modifications, price changes, and errors excepted No liability for errors or printing mistakes Reversing automatic, rubber spring axle, independent wheel suspension, tiltable loading area, jockey wheel, marker lights, chassis and tipper body fully hot-dip galvanized, braked, including warranty, V-drawbar combined with longitudinal frame, tipper body one-piece steel, 3-stage hard chrome tipping cylinder, 13-pin plug and reversing lights, sidewalls made of anodized aluminum with recessed locks, fully detachable, 4 tie-down rings mounted on the platform floor, traction force 800 kg per ring, Dekra certified.

Stanje: novo, največja dovoljena obremenitev: 2.062 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.560 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, Tipper 2726-J-63 AFS REAR TIPPER WITH HAND PUMP Technical Specifications: * Trailer type: EDUARD 2726-J-63 Rear tipper with hand pump * Gross vehicle weight: 2700 kg * Payload: 2062 kg * Internal dimensions (L x W x H): 256 cm x 150 cm x 30 cm * Steel loading ramps 246 cm including ramp storage compartment and Eduard support feet * Drop side locks made of steel * External dimensions (L x W x H): 384 cm x 156 cm x 106 cm * Loading height approx. 63 cm * Floor completely made of steel sheet * 4 lashing points per side * Side panels made of aluminium * Chassis hot-dip galvanized by immersion bath * Electrical system: 13-pin, 12V * Tyres: 195/50R13 * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axles * Automatic jockey wheel * Hydraulic pump with hand pump * Ball coupling Plus vehicle registration certificate / COC document €39.00 All prices include VAT. Visit us also at Opening hours Reichertshofen: Monday to Friday: 8:00 a.m. - 12:00 p.m. and 1:00 p.m. - 5:00 p.m. Closed on Saturday and Sunday You can also arrange to collect your desired trailer and accessories here: Kedpfx Abothkg Uj Usfa BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: BLYSS Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: Photos may show non-standard equipment. Technical changes (e.g. tyre sizes) reserved.