Humbaur Prikolice nakup rabljenega (558)

Stanje: novo, lastna masa: 3.490 kg, največja dovoljena obremenitev: 14.510 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, prostornina tovornega prostora: 17,6 m³, velikost pnevmatike: 385/65 r22,5, medosna razdalja: 4.900 mm, barva: srebrn, Leto izdelave: 2023, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, Humbaur construction material transport trailer HD18 Turntable trailer Gross vehicle weight rating: 18,000 kg Unladen weight: only 3,490 kg SAF axles with air suspension Dcsdpfx Afeizhl Aj Ujb Chassis frame hot-dip galvanized by immersion Hot-dip galvanized corner and center stanchions Aluminium drop sides Phenolic plywood floor Lashing and perforated external frame with only 125 mm hole spacing and 57 pairs of lashing points Front wall height: 1,200 mm, side wall height: 1,000 mm Document/registration cost: €280 Freight cost per km: €3

Stanje: rabljeno, lastna masa: 2.645 kg, največja dovoljena obremenitev: 7.855 kg, skupna masa: 10.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2012, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 400 mm, barva: srebrn, Leto izdelave: 2012, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German trailer * From second owner * Condition: see photos * Body: 2-axle tandem low-bed trailer * Body dimensions: length 5,200 mm x width 2,400 mm x height 400 mm * Heavy-duty, welded and hot-dip galvanized frame for optimum stability and safety. Side panels made of anodized aluminium, foldable and removable on the sides and rear, corner posts at front and rear plug-in. Dcedpex Emgbjfx Af Ujb * Heavy-duty galvanized steel ramps, laterally adjustable, ramp surface made of softwood flooring, gas pressure ramp lifters. 3 meters, divided into 1.6 meters and 1.4 meters. * Central tube with screw-type towing eye Ø 40 mm, galvanized, infinitely adjustable via crank. * EBS braking system with spring-loaded brake. * BWP axles with drum brakes. * Air brake system with release valve, automatic load-sensing brake. * ABV system with spindle parking brake. * Recessed lashing points in the deck floor. * Floor made of 40 mm softwood planks. * Reinforced 12 t geared support winch with load and quick speed. * Full LED rear lights. * Rotating beacon. * Gross vehicle weight rating (GVWR) 10,500 kg. * Unladen weight 2,646 kg. * Payload 7,854 kg. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Additional trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend inspection and assessment of the goods, to avoid any misunderstandings regarding condition and suitability on the buyer’s side. Viewing and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We do not assume liability for errors or incorrect information in the offer. The buyer is required to independently verify the condition and equipment of the goods / vehicles. Subject to change, prior sale, and errors.

Stanje: novo, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.680 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, Leto izdelave: 2025, Novo vozilo Humbaur zadnji kiper z akumulatorsko črpalko, ročno črpalko, jekleno nadgradnjo, 6 vgrajenih pritrdilnih obročev, avtomatsko podporno kolo, vse stranice se odpirajo. Vedno na zalogi ali hitro dobavljive novi in rabljeni priklopniki. Prav tako imam nadgradnje za male tovornjake in tovornjakarske priklopnike, posebne izvedbe, popravila, servis, TÜV pregled na zalogi Hechenberg Tittmoning. Možnost lizinga, financiranja in odkupa. POZOR: iščem delavca M/Ž/D na podlagi 580 € ali za krajši delovni čas, zaželen kmetijski mehanik, ključavničar ali podobno. Dcsdpfx Aexqui Sjf Uob

Stanje: novo, največja dovoljena obremenitev: 1.045 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 1.520 mm, skupna širina: 2.000 mm, skupna višina: 2.105 mm, Leto izdelave: 2025, Humbaur HK 152515-15P Box Trailer New Vehicle Single Axle Year of Manufacture: 2025 Gross Weight: 1,500 kg Unladen Weight: 455 kg Payload: 1,045 kg Overall Dimensions: 3,775 mm x 2,000 mm x 2,105 mm Internal Dimensions: 2,510 mm x 1,510 mm x 1,520 mm Double-wing rear door Galvanised rod lock and hinges Side walls and roof made of multi-ply wood UV-resistant plastic coating 15 mm thick floor plate Interior lighting 6 lashing rings integrated into the frame profile Lashing capacity 400 kg per ring Jockey wheel V-drawbar 13-inch wheels Dcodovvglmspfx Af Ujb Humbaur box trailers can be individually configured to your requirements. A wide range of accessories and equipment options is available. Each model is available in different weight classes and sizes, including versions with Sandwich PurFerro superstructure. We would be happy to provide you with a personalised, non-binding quote. ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We explicitly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend viewing and inspection to avoid any misunderstanding regarding condition and suitability for the buyer. Viewings and inspections can be arranged by appointment at any time and are expressly encouraged!!! All internal dimensions specified are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger Schnee GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, lastna masa: 965 kg, največja dovoljena obremenitev: 2.535 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.700 mm, širina tovornega prostora: 2.180 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 2,1 m³, vzmetenje: drugo, velikost pnevmatike: 13 zoll, medosna razdalja: 990 mm, Oprema: dvižna zadnja plošča, spojka prikolice, Universal transporter MTKA 354722, Gross vehicle weight rating 3500 kg, Tipping platform with double-acting hydraulics, drive-over ramp 900 mm high with special perforated pattern and gas springs. 8 pairs of lashing points, each with 400 kg lashing capacity, integrated in the outer frame. Drop-down and removable side panels made of aluminium. Dcodjgffnzopfx Af Ujb Loading height only 650 mm. Lighting according to Road Traffic Regulations (StVO), 13-pin electrical system. Accessories such as spare wheel, 100 km/h speed approval, winch, etc. are of course available at any time for an additional charge. Price plus shipping and registration documents

Stanje: novo, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 7,3 m³, vzmetenje: zrak, velikost pnevmatike: 435/50 r19,5 zoll, Leto izdelave: 2023, Oprema: ABS, HUMBAUR TANDEM THREE-WAY TIPPER (HTK UNIVERSAL) With AIR SUSPENSION!!! Chassis frame HOT-DIP GALVANIZED Platform frame HOT-DIP GALVANIZED Side panels HOT-DIP GALVANIZED Equipment: Permissible total weight: 18,000 kg Payload: approx. 13,700 kg Support load: 1,000 kg Loading platform approx. 5040 x 2420 mm Steel side panels approx. 600 mm high Side panel lifting springs for the side walls Fixed drawbar Reinforced 25t (static) gearbox support winch with load and fast gear 5 pairs of 6 t lashing rings recessed in the platform floor 2 foldable and telescopic support legs at the rear of the vehicle (hot-dip galvanized) 2-circuit ABS air brake system Integrated compartment for 2 aluminium loading ramps in the chassis frame Central locking system on sides and rear Plastic mudguards with anti-spray system 4 SPHERICAL TIPPING BEARINGS WIDE tyres, 4 x 435/50 R19.5 inch 15-pin 24 Volt electrical connector for 24 Volt lighting 7-pin 24 Volt ABS connector Compressed air connections RED/YELLOW Ø 50 mm DIN towing eye Coupling height approx. 790 - 1050 mm Hydraulic connection: SVK BG3 plug We optionally offer at extra charge: • 2 aluminium loading ramps, approx. 3570 x 400 mm, load capacity per pair 10,000 kg • Surcharge: net €2,650 plus VAT • 1x plastic toolbox mounted under the loading platform • Surcharge: net €330 plus VAT • Grilles over the rear lights • Surcharge: net €190 plus VAT => Freight costs for delivery: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* Djdpoiciudsfx Af Uecb *Sale to business customers only!* *Images may differ and are for general guidance only => may include/show optional equipment at extra charge*

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2024, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 r 17,5, barva: srebrn, Leto izdelave: 2023, Oprema: ABS, nalagalnik, Three-way Tipper HTK Gala 105024 for Rent! Description 1 day: €150 3 days: €420 1 week: €760 1 month: €2,350 HUMBAUR THREE-WAY TIPPER NEW MODEL 2019 (HTK THROUGH-LOADER / SMB AXLES) => INCLUDING THROUGH-LOADER DESIGN Djdpfx Afsn Amrvo Uecb => AUTOMATIC REAR PANEL LOCK RELEASE => Chassis frame HOT-DIP GALVANIZED => Bridge frame HOT-DIP GALVANIZED => Side panels HOT-DIP GALVANIZED Equipment: Permissible total weight: 11,900 kg Payload: approx. 9,200 kg Support load: 500 kg Loading area approx. 5,020 x 2,420 mm Steel side panels approx. 450 mm high Side panel lifting springs (lateral panels) Drawbar FIXED mounted, non-adjustable Reinforced 25 t gearbox support winch (static) with load & fast mode 8 flush-mounted 3 t lashing rings in the loading floor 2 foldable and telescopic supports at the rear (hot-dip galvanized) 2-circuit ABS air brake system Central locking on the side and rear Plastic mudguards with anti-spray protection system Tyres: 4 x 235/75 R17.5 inch 15-pin 24-volt electrical connector for the 24-volt lighting 7-pin 24-volt ABS connector Compressed air connections RED and YELLOW Ø 40 mm DIN towing eye Coupling height approx. 800 mm Hydraulic connection: SVK BG plug Optional extras at additional cost: Stronger brake cylinders and control valves as well as EBS • 2 aluminum drive-on ramps with 8 t load capacity per pair, including ramp storage compartment • Additional cost: net €2,250 plus VAT • 1 plastic toolbox • Additional cost: net €290 plus VAT Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU

Stanje: novo, lastna masa: 4.000 kg, največja dovoljena obremenitev: 15.000 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.410 mm, višina nakladalnega prostora: 800 mm, prostornina tovornega prostora: 10 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5 zoll, Leto izdelave: 2024, Oprema: ABS, HUMBAUR TANDEM THREE-WAY TIPPER "BULK MATERIAL/GRAVEL TIPPER" Dsdpfxoiciupe Af Uocb TYPE: HTK 195024 "Gravel Tipper" => Permissible total weight: 19,000 kg => Payload: approx. 15,000 kg => Curb weight: only approx. 4 tonnes => HOT-DIP GALVANIZED CHASSIS FRAME - Side walls made of HARDOX HB 450, foldable (spring-assisted lifting optional at extra charge; see below) - Rear wall made of HARDOX HB - Front wall made of fine-grain steel - Central three-side locking - Automatic rear wall release - Electronic air suspension - SAF axles, reinforced CD version, drum brakes - Unladen weight only approx. 4,000 kg - Chassis frame hot-dip galvanized by immersion bath - Side walls KTL + powder-coated in white - KNORR braking system - Drawbar head with “roof shape” - Folding underride guard - Body length: approx. 5,010 mm - Internal width: approx. 2,410 mm (pallet width) - Side wall height: approx. 800 mm (steel) - Ø 50 mm DIN towing eye - 15-pin 24V electrical connector (lighting) - 7-pin EBS connector - SVK-BG3 hydraulic quick-coupler - Compressed air couplings: RED/YELLOW OPTIONALLY AVAILABLE AT EXTRA COST: • Side wall spring-lifting per side = €890 net plus VAT => Delivery freight: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and change!* *Price valid ex works D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general orientation only—may show equipment available at extra charge*

Stanje: novo, lastna masa: 10.400 kg, največja dovoljena obremenitev: 4.000 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6,1 m³, vzmetenje: jeklo, velikost pnevmatike: 285/70/19,5, medosna razdalja: 1.260 mm, barva: drugo, Leto izdelave: 2023, Oprema: ABS, SAF axles Maintenance-free parabolic suspension with load equalization ABS braking system according to ECE regulations with ALB function ABS plug connection ISO 7638 Spindle-type parking brake 24 Volt lighting system with multi-chamber rear lights and LED side marker lights 15-pin connector plug Fixed drawbar Reinforced 12 ton gearbox support winch with load and fast operation Hydraulic three-way tipping system controlled via towing vehicle Hydraulic quick-release coupling SVK BG3 as single-circuit connection Platform floor made from 4 mm fine-grain steel 4 ball-type tipping bearings with 2 interchangeable tipping bolts Steel side walls, 500 mm high Side and rear walls fold-down and removable, also swinging with central locking Optional extras if required: Ramps with 10 t load capacity per pair: €1,950 + VAT Side underrun protection: €365 + 19% VAT etc. If you require additional accessories, please simply call us at the number below. All prices ex works. Dodpfxeggikxe Af Uscb

Stanje: novo, lastna masa: 4.800 kg, največja dovoljena obremenitev: 14.200 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 1.400 mm, Leto izdelave: 2024, Oprema: ABS, HUMBAUR 19 t Construction Machinery Transporter Tandem Flatbed with TWIN TYRES REAR LOADING AREA TAPERED HBTZ 196524 BS / Hot-dip galvanized / Side aluminum drop sides with CENTRAL STANCHIONS Chassis frame hot-dip galvanized by immersion Side drop sides made of anodized aluminum with GALVANIZED CENTRAL STANCHION HOT-DIP GALVANIZED STEEL FRONT WALL INCLUDES: - SAF low bed axles - SPRING-ASSISTED RAMP LIFTER EQUIPMENT: • AIR SUSPENSION with raising and lowering function • SAF low bed axles • TWIN TYRES 235/75 R17.5 • EBS Electronic Braking System • 6 recessed 10 t lashing rings in platform floor • 14 recessed 2 t lashing rings in outer frame • Front support: reinforced 25 t (static) gear support leg with load and rapid gear • Rear support: 2 foldable supports on chassis frame • Loading ramps approx. 3,100 mm long and approx. 750 mm wide, laterally adjustable, hot-dip galvanized by immersion • Platform floor with wooden cover and STEEL tear plate above the wheels • WOODEN COVER in the loading ramps • SPRING-ASSISTED RAMP LIFTER • ALUMINUM DROP SIDES with galvanized CENTRAL STANCHIONS • HOT-DIP GALVANIZED STEEL FRONT WALL • Low loading height: only approx. 960 mm • Continuously height-adjustable drawbar • Coupling height approx. 800 - 1,000 mm • DIN towing eye Ø 50 mm • Rear loading area tapered • Mudguards with antispray system Optional, at extra charge: • Plastic toolbox under the loading platform • Surcharge: 290,- Euro plus VAT => Delivery freight charges: 2.90 Euro plus VAT per km => Prices are ex-works D-86368 – Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex D-86368 - Gersthofen* *Sale to business customers only!* *Images may differ and are only for general guidance => may contain/show accessories at extra charge* Dodpfxefi D Eps Af Uscb

Stanje: novo, lastna masa: 8.650 kg, največja dovoljena obremenitev: 31.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 4x2, dolžina tovornega prostora: 9.220 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, Leto izdelave: 2025, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HTD 40K-RM-BM_2022 Technical Data: Internal dimensions: approx. 9,220 mm x 2,540 mm x 0 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Gross weight permitted: 24,000 kg Payload: approx. 15,350 kg Tyres: 235/75R17.5 inch Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820–1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Gross weight (special approval): 40,000 kg Payload (special approval): approx. 31,350 kg Djdpfxeiciuto Af Uecb Low-bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 mm Technical gross weight: approx. 44,000 kg Axle load (technical): approx. 11,000 kg 4 pairs of lashing points, 10,000 kg per lashing point Flush-mounted lashing rings in the low bed 3 pairs of lashing points, 10,000 kg per lashing point 4 pairs of lashing points, 2,000 kg per lashing point over wheel recess 3rd and 4th axles Lashing points on the external frame of the low bed Standard equipment: Axles: Low loader axles from well-known manufacturers Tyres: Tyres according to manufacturer’s choice Suspension: Air suspension unit including raising and lowering, acting on the rear axle assembly Braking system: Braking system in accordance with EC directives with EBS 4S/3M, multi-voltage version (12–24V), spring-loaded parking brake incl. 2 test ports accessible from outside for brake/modulator and airbag pressure Electrical system: LED lighting with indicator function for side marker lights, multi-voltage (12–24V) Turntable: Robust welded construction with low-maintenance slewing ring Towing gear: Cranked drawbar with Ø 50 mm towing eye, low-maintenance silent bushings, including height adjustment for the drawbar Chassis frame: Robust welded construction made from high-strength fine grain steel Continuous cross members for maximum stability Front wheel recesses (length at top approx. 2,500 mm – depth approx. 410 mm) and rear (length at top approx. 1,470 mm – depth approx. 370 mm); without wheel recess covers Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cut-outs over the rear wheels with a 2,010 mm wheelbase, front corners chamfered Rear climbing strips on the drive-on slope for maximum safety during loading and unloading Floor: 50 mm softwood floorboards (painted/impregnated) Ramps: One-piece hot-dip galvanised drive-on ramps (3,150 mm x 750 mm) with 50 mm softwood flooring (painted/impregnated), laterally adjustable, direct-acting upright spring lifts for effortless operation Optimal securing via turnbuckle and counter stop Corrosion protection: Chassis frame hot-dip galvanised in immersion bath Support: 2 foldable supports at the rear left and right of vehicle Equipment: Folding side underrun protection Front half-round mudguards made of plastic; rear straight steel mudguards with antispray function 2 wheel chocks with holders; contour marking in accordance with ECE Regulation R48 => Plus much more => Delivery freight costs: €2.90 plus VAT per km => Prices ex works: D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. 0911/830504 DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Images may vary and serve only as a general guide; accessories shown may be available at an additional cost*

Stanje: novo, lastna masa: 4.800 kg, največja dovoljena obremenitev: 16.200 kg, skupna masa: 21.000 kg, dolžina tovornega prostora: 6.540 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, Leto izdelave: 2024, Oprema: ABS, Air suspension with lift/lower function SAF low-bed trailer axles Twin tyres 235/75 R 17.5 EBS electronic braking system 6 flush-mounted 10 t lashing rings in the floor 14 lashing rings (2 t) in the outer frame Gearbox support winch with load and fast gear Rear support: 2 foldable supports on the chassis frame Ramps approx. 3100 mm long and approx. 750 mm wide, laterally adjustable Decking with wooden flooring and steel chequer plate above the wheels Wooden flooring in the ramps Spring-assisted ramp lifters Dedpfx Afsi Dqn Rj Uscb Aluminium side walls with central stanchions Hot-dip galvanised steel front wall Stepless height-adjustable drawbar Coupling height approx. 800 - 1000 mm DIN drawbar eye d= 50 mm Rear loading area tapered Mudguards with antispray system Additional equipment available on request at any time Collection ex works or delivery Price per km: €2.90

Stanje: novo, lastna masa: 6.700 kg, skupna masa: 30.000 kg, dolžina tovornega prostora: 8.550 mm, širina tovornega prostora: 2.540 mm, Leto izdelave: 2024, Oprema: spojka prikolice, HTD30K- RM-BM / Air Suspension Technical Data: Internal dimensions: approx. 8,550 mm x 2,540 mm Overall dimensions: approx. 10,900 mm x 2,540 mm x 3,790 mm Permissible total weight: 24,000 kg Payload: approx. 17,300 kg Tyres: 235/75 R17.5 twin, inches Loading height: approx. 900 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 800-980 mm Plank length: approx. 3,150 mm Plank width: approx. 750 mm Permissible total weight (special approval): 30,000 kg Payload (special approval): approx. 23,300 kg Low-bed length: approx. 6,500 mm Overall length (B-dimension): 10,800 mm Technical total weight: approx. 33,000 kg 8 pairs of lashing rings, 3,000 kg per lashing point Lashing rings on the outer frame 3 pairs of lashing rings, 10,000 kg per lashing point Lashing rings recessed in the low-bed 2 pairs of lashing rings, 10,000 kg per lashing point Lashing rings recessed in the high-bed 4 pairs of lashing rings, 2,000 kg per lashing point over the wheel recesses on 2nd and 3rd axle 7 pairs of lashing rings, 3,000 kg per lashing point Stake pockets (90x50 mm) with lashing facility Standard Equipment: Axles Low-loader axles from renowned manufacturers Suspension Air suspension module, including lifting and lowering, effective on the rear axle unit Braking system Braking system according to EU guidelines with EBS 4S/3M, multivoltage version (12-24V), spring-loaded parking brake including 2 external test ports for brake/modulator and airbag pressure Electrics LED lighting with indicator function for side marker lights, multivoltage (12-24V) Turntable Robust welded construction with low-maintenance ball bearing turntable ring Drawgear Drawbar with 8° inclined, height-adjustable draw-eye, Ø40 mm Low-maintenance silent bushings Frame Robust welded construction from high-tensile fine-grained steel Continuous cross members for maximum stability Wheel recesses front (top length approx. 2,170 mm) and rear (top length 1,280 mm), depth 330 mm Excavator recess (length 2,090 mm, width 750 mm, depth 185 mm) Maximum safety during loading and unloading Floor 50 mm softwood decking Ramps Single-piece, hot-dip galvanized access ramps (3,100 mm x 750 mm) with 50 mm softwood decking, laterally adjustable Direct-acting, upright spring-lifters for effortless operation Optimal safety via tension lock and counter stop Finish Chassis and turntable frame hot-dip galvanized by immersion Supports 2 folding supports at the rear left and right on the vehicle tail Dcodpfx Afjq Ulaqe Ujb Equipment Folding side underrun protection Other Retro-reflective line marking according to ECE Regulation R48, white on the sides, red on the rear Wheel recess cover at the front with 2 pairs of stake pockets, without covering (cover retractable underneath the longitudinal beams) Hardwood covering for front wheel recess covers Wheel recess cover Hardwood covering for rear wheel recess covers Storage box at the top front of the platform, with folding cover, size approx. L 700 x W 810 x H 140 mm LED warning package, HTD cranked Aspöck warning boards, fourfold, electrical system and rotating beacon 3 m equipment package without ramp incline for HTD30K wheel recesses with low-bed 6,500 mm, folding extension with spruce planks for the flat part of the low-bed Basic hydraulics for trucks with rear connection, Max. operating pressure 200 bar and up to 150l/min with 2-circuit hydraulic connection and return line with quick-coupling SVK BG3 Hydraulic side-shift of ramps by approx. 300 mm each Hydraulic ramp lifter fo

Stanje: novo, lastna masa: 7.500 kg, največja dovoljena obremenitev: 32.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 03/2023, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 235/75r17,5, Leto izdelave: 2024, Oprema: ABS, osrednja vrtljiva plošča, TOP EQUIPMENT – INCLUDING THE FOLLOWING ACCESSORIES: Chassis frame hot-dip galvanized in immersion bath Front storage box on platform, with hinged lid Rear storage box on platform, with hinged lid Recess for excavator arm storage, lowbed – rear section 3 m equipment package without ramp incline Warning package for special permit Dsdeglbllopfx Af Uscb Steel sheet toolbox Stake pocket set in outer frame Basic hydraulics for truck with rear connection Hydraulic ramp lift for one-piece ramps Hydraulic lateral ramp shift Hydraulic support legs left and right 1 pair of 6t lashing rings bolted to outer frame WABCO Smart Board pre-configured Complete SSV front left HTD409525K COC certificate of conformity OPTIONAL Rubber flooring on ramp €1,890 net Rubber flooring on the incline €1,250 net Adjustable drawbar 40 / 50 DIN

Stanje: novo, lastna masa: 6.000 kg, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2024, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE HUMBAUR LOW-LOADER TRAILER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED LOADING RAMPS => 10 x 10-TON LASHING POINTS => 10 x 3-TON LASHING POINTS, outer frame => 8 x 2-TON LASHING POINTS, above wheels => SPRING-ASSISTED LIFTING DEVICE FOR RAMPS => 40 mm DRAWBAR => APPROX. 2,700 MM LONG LOADING RAMPS => APPROX. 750 MM WIDE LOADING RAMPS Dcjdpfed U A Tgox Af Usb => TWIN TIRES 235/75 R17.5 INCH => LOADED PLATFORM HEIGHT ONLY APPROX. 860 MM => COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM => FRONT CORNERS BEVELLED => TWO FOLDING SUPPORT LEGS AT REAR => AND MUCH MORE => Delivery freight: 2.90 Euros plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Pictures may differ and serve only as an approximate reference => may show/include options subject to surcharge*

Stanje: novo, lastna masa: 5.680 kg, največja dovoljena obremenitev: 18.320 kg, skupna masa: 24.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, Leto izdelave: 2023, Oprema: ABS, Three-axle trailer BPW low-loader axles Electronic air suspension with 2 ride heights Lowering function for safe loading Brake system compliant with EC regulations with 2S/2M Drawbar with 50 mm towing eye Raising and lowering of the drawbar 8 pairs of 10 t lashing rings recessed in the low-bed 6 pairs of 2 t lashing points above wheel cutouts Dodjh I H Ddepfx Af Uscb 5 pairs of 3 t lashing/pocket sockets for 90x50 mm stanchions 50 mm softwood floor Chassis frame hot-dip galvanized by immersion bath Foldable side underrun protection Stanchion pocket package in outer frame One-piece hot-dip galvanized access ramps Laterally adjustable Direct-acting vertical spring supports

Stanje: novo, lastna masa: 3.900 kg, največja dovoljena obremenitev: 9.700 kg, skupna masa: 13.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.280 mm, širina tovornega prostora: 2.450 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, medosna razdalja: 1.270 mm, Leto izdelave: 2023, Oprema: ABS, spojka prikolice, HBTZ 197224 BS tandem with tapered rear 400 mm aluminium side walls Rear loading platform with tapered end Loading height: 870 mm Air suspension axles from renowned manufacturers ABS Dcodpfx Afegi H Dpj Ueb Height-adjustable drawbar One-piece spring ramps 3 pairs of 10-ton lashing points 8 pairs of 2-ton lashing points Fully galvanized Tyres: 205/65 R 17.5

Stanje: novo, lastna masa: 1.500 kg, največja dovoljena obremenitev: 3.500 kg, skupna masa: 5.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215, medosna razdalja: 850 mm, Leto izdelave: 2023, Oprema: ABS, HUMBAUR Construction Equipment Tandem Low Loader HS 654020 BS INCLUDES ALUMINIUM Loading Ramps at Rear HOT-DIP GALVANIZED CHASSIS FRAME Djdpfx Afshmm Rvs Ujcb Equipment: • Permissible gross weight: 6,500 kg • Payload approx. 4,900 kg • Loading area approx. 4,000 x 2,000 mm • Loading ramps made of ALUMINIUM • Height-adjustable drawbar • Automatic jockey wheel • 4 units 3 t lashing rings (in the corners) • 10 recessed 2 t tie-down points in outer frame • Dual-circuit air brake system with ABS • Steel sheet mudguards • Platform floor made from softwood planks • Chassis frame hot-dip galvanized by immersion bath • Tires 215/75 R17.5 Your benefits: • Low loading and construction height • Optimum corrosion protection through immersion hot-dip galvanization • Safe loading and unloading due to supports on the loading ramps • Simple and lightweight handling of the aluminium loading ramps • Ideal load securing options thanks to standard lashing points • Continuously height-adjustable drawbar enables compatibility with various coupling heights of towing vehicles • Low dead weight => thus, high payload

Stanje: novo, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, barva: srebrn, Oprema: ABS, dvižna zadnja plošča, spojka prikolice, 1 day: €135 3 days: €370 Dcjdpfxein Ia Ro Af Usb 1 week: €660 1 month: €1,950 Loading dimensions: 500 cm x 201 cm x 30 cm with loading ramps 11.5 Construction Machinery Tandem Low Loader HS 115020BS HOT-DIP GALVANIZED Equipment: • Permissible total weight, kg • Payload approx. kg • Loading area approx. 5000 x 2010 mm • Loading ramps with grating, hot-dip galvanized • Fixed drawbar • Reinforced 25 t gearbox support winch with load and fast speed (no jockey wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing brackets in the outer frame (2,000 daN per pair) • 2 drop-down support legs at the rear of the vehicle • ABS braking system • Steel mudguards, hot-dip galvanized • Decking made from timber flooring • Chassis frame including superstructure hot-dip galvanized by immersion

Stanje: novo, lastna masa: 1.600 kg, največja dovoljena obremenitev: 4.900 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215/75 r17,5 zoll, medosna razdalja: 850 mm, Leto izdelave: 2023, Oprema: ABS, HUMBAUR Tandem Low-Loader Trailer for Construction Machinery HS 654020 BS INCLUDES ALUMINIUM Loading Ramps at Rear HOT-DIP GALVANIZED CHASSIS FRAME Features: • Permissible gross weight: 6,500 kg • Payload approx. 4,900 kg • Loading area approx. 4,000 x 2,000 mm • Loading ramps made of ALUMINIUM • Fixed towing bar • Automatic jockey wheel • 4 x 3 t lashing rings (at the corners) • 10 x 2 t recessed lashing points in the outer frame • Two-circuit air brake system with ABS • Steel mudguards • Platform floor made from softwood planking • Chassis frame hot-dip galvanized by immersion • Tyres 215/75 R17.5 Your benefits: • Low deck height / overall height • Optimum corrosion protection thanks to hot-dip galvanization by immersion Dedpfehmm Ryex Af Uscb • Safe loading and unloading due to supports at the loading ramps • Easy and lightweight handling of the aluminium ramps • Ideal cargo securing options with standard lashing points • The infinitely adjustable height towing bar enables compatibility with different coupling heights of towing vehicles • Low net weight = high payload => Delivery charges: €2.90 plus VAT per km => Prices ex-works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL Fahrzeugbau *Subject to prior sale and technical changes!* *Price valid ex-works D-86368 Gersthofen* *Sale to business customers only!*

Stanje: novo, lastna masa: 1.700 kg, največja dovoljena obremenitev: 4.800 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215/75 r17,5 zoll, medosna razdalja: 850 mm, Leto izdelave: 2023, HUMBAUR Construction Machinery Tandem Low-Loader HS 654520 BS INCLUDES ALUMINIUM loading ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Specification: • Permissible total weight: 6,500 kg • Payload approx. 4,800 kg • Loading area approx. 4,500 x 2,000 mm • ALUMINIUM loading ramps • Continuously height-adjustable drawbar • Automatic jockey wheel • 6 pcs. 3 t lashing rings (in the corners) • 10 pcs. 2 t recessed lashing points in the outer frame • 2 adjustable support legs at the loading ramps • Dual-circuit air brake system with ABS • Steel mudguards • Platform floor made of softwood planks • Chassis frame hot-dip galvanized in an immersion bath Dcodehmm Rrjpfx Af Uob • Tires: 215/75 R17.5 Your advantages: • Low loading and construction height • Optimum corrosion protection thanks to hot-dip galvanizing by immersion • Safe loading and unloading thanks to supports at the ramps • Simple and easy handling of the aluminium ramps • Ideal load securing options thanks to standard lashing points • The continuously height-adjustable drawbar enables compatibility with various towing vehicle coupling heights • Low tare weight, thus high payload capacity => Freight costs for delivery: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and change.* *Price valid ex works D-86368 Gersthofen* *Sale to business customers only!*

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 23.350 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2024, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE LOWBED TRAILER => FULL AIR SUSPENSION (front and rear) => HOT-DIP GALVANIZED Permissible total weight: 30,000 kg Payload: approx. 23,350 kg Chassis frame hot-dip galvanized via immersion bath Air suspension SAF axle with drum brake Dcsdpehmm N Ujfx Af Uob EBS electronic braking system Tyres: 235/75R17.5 – 12 units Lowbed length: approx. 6,500 mm 3 pairs of 10 t lashing rings recessed in the lowbed 2 pairs of 10 t lashing rings recessed in the highbed 4 pairs of 3 t lashing points on the outer frame 3 pairs of 6 t lashing eyes on the outer frame 6 pairs of stake pockets 90 x 50 mm in the outer frame Toolbox at the front, top of the platform with hinged lid 3-metre widening package without incline, with fold-out supports Spring ramp lifter 4 x warning panels Rotating beacon Storage compartment under the loading floor 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for loading area and ramps Optional extras if required: Hydraulic ramp lifter €2,690.00 + VAT => Delivery freight cost: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may vary and are for general guidance only => may show/accessories subject to surcharge*

Stanje: rabljeno, lastna masa: 8.700 kg, največja dovoljena obremenitev: 31.300 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.740 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2023, Oprema: ABS, osrednja vrtljiva plošča, 4-AXLE LOWBED TRAILER WITH TOP-SPECIFICATION! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS) => FULL AIR SUSPENSION => WITH RAISING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => OUTER FRAME WITH MULTIPLE LASHING POINTS (PERFORATED FRAME) => CLIMBING STRIPS ON THE REAR OF THE INCLINE => 6 LASHING POINTS IN THE EXCAVATOR ARM RECESS AT THE REAR => LONG ONE-PIECE LOADING RAMPS => LOW INCLINE ANGLE Perm. gross weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized Bogie frame hot-dip galvanized Loading ramps hot-dip galvanized Air suspension SAF axles with drum brakes EBS electronic braking system Tyres: 235/75R17.5 – 16 ply Dedpfx Afjhvxgzs Uecb Lowbed length approx. 7,160 mm Recess for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm at rear of lowbed 4 pairs of 10 t lashing rings recessed in lowbed 2 pairs of 10 t lashing rings recessed in raised bed 4 pairs of 3 t lashing points on the outer frame of the lowbed 3 pairs of 6 t lashing eyes on the outer frame 4 pairs of stake pockets on the outer frame of rear bed 4 pairs of stake pockets on the outer frame of the lowbed 3-metre widening kit with folding outrigger (no bevel) 4 x warning panels with lighting Rotating beacon at the rear LARGE STEEL TOOLBOX under the loading area 2 storage compartments with folding lids on the upper platform Hydraulic ramp lifters 1-piece ramps approx. 3,150 x 750 mm Softwood flooring for the loading platform and ramps 40,000 kg gross permitted only with exemption certificate as per §70 => Delivery freight costs: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Interim sale and modifications reserved!* *Price valid ex works D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general reference only => may include/show accessories subject to extra charge*

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 10.000 kg, skupna masa: 13.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.250 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2024, Oprema: ABS, HUMBAUR Construction Machine Transporter Tandem Low-Loader REAR LOADING AREA ANGLED HBT 116224BS / Hot-dip galvanized / Aluminium drop sides Chassis frame hot-dip galvanized in immersion bath Drop sides anodized aluminium Specification: • Tandem low-bed trailer (construction machinery and material transporter) • Loading surface with rear-end angle • Permissible total weight 11,900 kg • Payload approx. 9,010 kg • Loading area approx. 6,200 x 2,460 mm • Platform floor made of approx. 40 mm softwood planks • 400 mm high anodized aluminium drop sides • Reinforced 25 t gear support winch with load and fast gear • Fixed drawbar • Coupling height approx. 750 - 1,000 mm • 3 pairs of recessed lashing rings, 3 t each (3,000 daN) • 6 pairs of recessed lashing points, 1 t each (1,000 daN) in outer frame • 2 telescopic folding supports at the vehicle rear • ABS dual-circuit air brake system Dsdpshmm Rksfx Af Uecb • 1-piece ramps, hot-dip galvanized, approx. 2,400 mm long and 520 mm wide, with galvanized STEEL GRATING SURFACE • Mudguards • Anti-spray system • Ø 40 mm DIN towing eye • Aluminium side underrun protection • Incline angle only approx. 16° • Loading height unladen only approx. 920 mm Optionally available at extra charge: • Plastic toolbox under the loading platform • Surcharge: 290,- Euro plus VAT => Delivery freight costs: 2.90 Euro plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL FAHRZEUGBAU *Interim sale and changes reserved!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general illustration only – may show/contain optional accessories at extra cost*

Stanje: novo, lastna masa: 2.500 kg, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 250 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2024, Oprema: ABS, Construction Machinery Tandem Low Loader HS 115020BS HOT-DIP GALVANIZED Specification: Dedpfehmm Rnox Af Ujcb • Permissible total weight: 11,900 kg • Payload: approx. 9,410 kg • Loading area: approx. 5000 x 2010 mm • Access ramps with grating surface, hot-dip galvanized • Fixed drawbar • Reinforced 25 t mechanical landing gear with load and rapid gear (no jockey wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing brackets in the outer frame (2000 daN per pair) • 2 fold-down supports at the rear of the vehicle • ABS braking system • Steel mudguards, hot-dip galvanized • Platform floor with wooden decking • Chassis frame including structure hot-dip galvanized in immersion bath => Freight charges for delivery: €2.90 plus VAT per km => Prices ex D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL Fahrzeugbau *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may vary and are for general reference only => may show/contain accessories for an additional charge*