Humbaur Prodajna Prikolica nakup rabljenega (559)

Stanje: novo, največja dovoljena obremenitev: 38.000 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.180 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, Oprema: ABS, HUMBAUR 3-axle low-loader trailer with recessed loading bed, Type HTS30K-V44+ --- INCLUDES lift axle INCLUDES self-steering trailing axle with SAF air suspension INCLUDES 3-metre extension package INCLUDES storage box under loading area INCLUDES TIM/WABCO SmartBoard for axle load display INCLUDES hot-dip galvanized chassis INCLUDES aluminium sideboards and storage box for gooseneck platform INCLUDES stake pockets and lashing package INCLUDES excavator trough Equipment: V44+ * Perm. gross weight 48,000 kg * Payload approx. 38,000 kg * Chassis frame and ramps hot-dip galvanized in immersion bath * SAF air suspension aggregate including lifting and lowering * INCLUDES hot-dip galvanized chassis * Lift axle with start-up aid and trailing self-steering axle * EBS electronic braking system * WABCO SmartBoard for axle load display * LED lighting system * Loading height approx. 890 mm * Fifth wheel height: approx. 1,230 mm * Tyres 235/75R17.5 – 12 units * Lowbed length approx. 8,680 mm including ramped section * Gooseneck platform length approx. 3,500 mm including ramped section * Excavator trough * 2" king pin adjustable by 340 mm for 2+3 axle tractor units * Gooseneck with 400 mm front wall * 400 mm aluminium sideboard, side-foldable + lockable storage box with lid * Ramp rail at recess towards gooseneck * 3 pairs of 6-tonne recessed lashing rings in raised bed * 3 pairs of 3-tonne lashing points in outer frame of raised bed * 5 pairs of 10-tonne recessed lashing rings in lowbed * 3 pairs of 6-tonne lashing eyes bolted to outer frame * 3 pairs of stake pockets in outer frame of raised bed * 5 pairs of stake pockets in outer frame of lowbed * 3-metre widening package with fold-out outriggers, wooden planks * Steel sheet tool box under loading area, lockable, designed as a storage compartment for wooden planks mounted laterally under loading area * Warning package with lighting * Rotating beacon at the rear * One-piece ramps approx. 3,150 x 750 mm – approach angle approx. 10° * Softwood covering on ramps, lowbed & gooseneck platform Cpodpokn N S Uofx Abvjw * Spring lifting mechanism for the ramps * COC documents * 48,000 kg gross vehicle weight only with special permit under §70 * Climbing strips on ramp incline * Brake connection: red/yellow * Electrics: triple socket with 2x 7-pin sockets (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 --- Sample photos – Equipment may vary! *Stock vehicle – available immediately *Subject to prior sale *Ex works price

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.550 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 880 mm, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HUMBAUR 3-axle turntable low-loader with recessed loading platform/high deck, Model HTD309525-K – PARABOLIC SUSPENSION – V2-Plus Csdjkn N S Aspfx Abvopw --- INCLUSIVE: Chassis frame and turntable hot-dip galvanized by immersion Parabolic suspension with rear axle equalization unit ABS braking system (suitable for tractor units and trucks) 12 & 24 Volt LED multi-voltage lighting system Warning package and rotating beacon Stake pockets and lashing package Integrated toolbox at the front of the deck, with folding lid 3-meter widening package with storage compartment Features: * 24 months warranty * Permissible total weight: 30,000 kg * Payload: approx. 23,500 kg * Chassis frame and turntable hot-dip galvanized by immersion * Parabolic suspension with rear axle equalization unit * ABS braking system (suitable for tractor units and trucks) * 12 & 24V LED multi-voltage lighting system, 15-pin 24V connector and 13-pin adapter * Load height approx. 880 mm * Tyres: 235/75R17.5 – 12-ply * Low-loader platform: 6,500 mm incl. drive-on slope * B-dimension: 10,760 mm * Drawbar with 8° angled towing eye Ø 40mm, height-adjustable * 3-way drawbar mount for various truck coupling heights * Integrated toolbox at the front of the deck, with folding lid * 3 pairs of recessed lashing rings, 10 t, in the low deck * 2 pairs of recessed lashing rings, 10 t, in the high deck * 4 pairs of lashing points, 3 t, in the outer frame of the low deck * 3 pairs of bolted lashing eyes, 6 t, on the outer frame * 4 pairs of lashing points, 2 t, above the wheel cut-outs on 2nd and 3rd axle * 6 pairs of stake pockets in the outer frame (stake pocket package) * Chassis frame and turntable hot-dip galvanized by immersion * One-piece ramps, approx. 3150 x 750 mm, with spring lifting system and mechanical side shift * Drive-on angle approx. 10-11° * Softwood decking for loading platform and ramps * Pendulum support legs at rear * 3-meter widening package with folding outriggers, wooden planks * Steel toolbox under the loading platform, lockable, mounted on the side under the deck for wooden plank storage * Climbing strips welded onto the drive-on slope * 30,000 kg gross vehicle weight rating only with special permit according to §70 * Brake connections: red/yellow * Warning package and rotating beacon --- Optional versions at extra cost: * V2 Plus with hydraulic ramp assist = €1,000 net surcharge * V2 PlusPlus (spring assist) with excavator recess = €700 net surcharge * V2 PlusPlus with hydraulic ramp assist & excavator recess = €1,700 net surcharge --- *Stock vehicle – immediately available *Interim sale reserved *Ex works price

Stanje: novo, največja dovoljena obremenitev: 31.300 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.130 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, Humbaur HTD40-K V20 Cpedpfx Aekn N Susbvjw Permissible total weight: 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized Turntable frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension with manual rear lowering SAF axle with drum brake EBS electronic braking system Tyres: 235/75R17.5 – 16 ply Low bed length approx. 7,160 mm Recess for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm, at the rear section of the low bed 4 pairs of recessed 10 t lashing rings in the low bed 2 pairs of recessed 10 t lashing rings in the high bed 4 pairs of 3 t lashing points on the external frame of the low bed 3 pairs of 6 t lashing eyes on the external frame 4 pairs of stake pockets on the outer frame of the high bed 4 pairs of stake pockets on the outer frame of the low bed 3-meter widening package with fold-out extensions, straight design 4 warning signs with lighting Rotating beacon at the rear Storage compartment under the loading area 2 storage compartments with folding lids on the high platform Hydraulic ramp lifters One-piece ramps approx. 3,150 x 750 mm Softwood flooring for loading area and ramps 40,000 kg GVWR only with special permit according to §70 * Stock vehicle – immediately available * Subject to prior sale * Price ex works

Stanje: novo, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.550 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 880 mm, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HUMBAUR 3-axle turntable low loader with cranked loading platform/high deck, model HTD309525-K - PARABOLIC SUSPENSION - V2 --- INCLUDED: * Chassis frame and turntable galvanised by hot-dip immersion * Parabolic suspension with rear axle equalizer unit * ABS braking system (suitable for tractor and truck) * 12 & 24 Volt LED multi-voltage lighting system * Warning package and rotating beacon Equipment: * 24 months warranty * Permissible total weight: 30,000 kg * Payload: approx. 24,000 kg * Chassis frame and turntable hot-dip galvanised * Parabolic suspension with rear axle equalizer unit * ABS braking system (suitable for tractor and truck) * 12 & 24 Volt LED multi-voltage lighting system, 15-pin 24V connector and 13-pin adapter * Loading height: approx. 880 mm * Tyres: 235/75R17.5 – 12 times * Low loader platform: 6,500 mm including approach ramp * B-dimension: 10,760 mm * Drawbar with 8° inclined towing eye, Ø 40 mm, height adjustable * 3-position drawbar mount for various truck coupling heights * 3 pairs of 10 t lashing rings, recessed in low bed * 2 pairs of 10 t lashing rings, recessed in high bed * 4 pairs of 3 t lashing points on outer frame of low bed * 4 pairs of 2 t lashing points above wheel cut-out at 2nd and 3rd axle * Chassis frame and turntable hot-dip galvanised Codpfx Aekn N R Eobvspw * One-piece ramps, approx. 3150 x 750 mm, with spring assist and mechanical lateral shift * Ramp angle: approx. 10-11° * Softwood flooring for loading platform and ramps * Rear pendulum support legs * Climbing strips welded onto approach ramp * 30,000 kg gross weight only with special permit according to §70 * Brake connections: red/yellow * Warning package and rotating beacon --- Modular design for easy retrofitting with 3 m folding extension, toolbox in high deck, plank box under the loading platform, etc. --- *Stock vehicle – immediately available *Subject to prior sale *Ex works price

Stanje: novo, največja dovoljena obremenitev: 1.135 kg, skupna masa: 1.500 kg, dolžina tovornega prostora: 3.100 mm, širina tovornega prostora: 1.765 mm, višina nakladalnega prostora: 150 mm, skupna širina: 2.450 mm, skupna višina: 670 mm, Leto izdelave: 2025, * Humbaur HKT 153117 S * Load platform hydraulically lowerable * Year of manufacture: 2025 * Gross weight: 1500 kg * Unladen weight: 365 kg * Payload: 1135 kg * Overall dimensions: 4610 mm x 2450 mm x 670 mm * Internal dimensions: 3100 mm x 1765 mm x 150 mm * Bolted, hot-dip galvanized chassis * Mechanical safety lock for the pivot axle during driving operation * Humbaur multifunction lighting * Rear number plate holder, can be swivelled away for loading * Wooden floor, 15 mm thick * Side walls made of aluminium, 150 mm high with 4 pairs of integrated lashing rings * Socket recesses for tarpaulin frame etc. at all corners * Automatic jockey wheel * V-drawbar ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We explicitly reserve the right of prior sale as this item is also offered on other platforms. We strongly recommend viewing and inspection to ensure correct understanding of the condition and suitability by the buyer. Viewings and inspections are possible and expressly encouraged at any time by prior appointment!!! Images may show similar models and may include optional, extra-cost accessories. The specified internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Cpodpfxsvvgi Ee Abvjw Opening hours: Monday ? Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, lastna masa: 6.000 kg, največja dovoljena obremenitev: 29.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2008, naslednji pregled (TÜV): 11/2023, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 1.260 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, lifting/lowering function, ABS (anti-lock braking system), lashing rings, lateral aluminum underrun protection, landing legs, toolbox. Body: 3-axle flatbed trailer with removable stanchions, featuring central 3x 9t SAF axles, disc brakes, galvanized frame! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors. Cpodpjlz R D Ejfx Abvew

Stanje: dober (rabljeno), prevoženi kilometri: 191.500 km, moč: 96 kW (130,52 KM), prva registracija: 12/2019, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 4.330 mm, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, število prestav: 6, emisijski razred: Euro 6, skupna širina: 2.300 mm, dolžina tovornega prostora: 42.000 mm, širina tovornega prostora: 21.300 mm, višina nakladalnega prostora: 22.500 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, servovolan, spojler, = Druge možnosti in oprema = - Sopotniški sedež (klop) - Strešni spojler - Euro 6 - Voznikov varnostni zračni meh - Lesena nakladalna površina - Višinsko nastavljiv voznikov sedež - Sredinski sprednji naslon za roke - Radio/CD-predvajalnik - Imobilizator - Reklama (nalepka) - Predelna stena z oknom = Dodatne informacije = Splošni podatki Kabina: enojna Codpfx Aju Dxm Asbvspw Registrska številka: VJS-63-X Tehnični podatki Število valjev: 4 Prostornina motorja: 2.299 cc Največja obremenitev sprednje osi: 1850 kg Največja obremenitev zadnje osi: 2100 kg Teže Lastna teža: 2.477 kg Nosilnost: 1.023 kg Skupna dovoljena masa: 3.500 kg Funkcionalno Dvižna nakladalna ploščad: D'HOLLANDIA DHLM08, zadnja dvižna vrata, 750 kg Vzdrževanje, zgodovina in stanje Tehnični pregled: veljaven do 12.2026 Tehnično stanje: dobro Vizualno stanje: dobro

Stanje: novo, konfiguracija osi: 2 osi, Oprema: ABS, Za upite u vezi vozila stoji Vam na raspolaganju gospodin Seidel (tel.). baur HTK 115524 trostrani kiperski tandem prikolica potpuno pocinčana, Knorr ABS, EBS, potpora pozadi, kanali za rampe (rampe opciono), međuosovinski razmak: 5.450 mm, dužina: 7.550 mm, širina: 2.550 mm, visina: 2.500 mm, dužina utovarne površine: 5.650 mm, širina utovarne površine: 2.400 mm, visina utovarne površine: 500 mm, dozvoljena ukupna masa: 11.900 kg, masa praznog vozila: 3.040 kg, nosivost: 8.860 kg. Codpfx Ajyfvzmsbvopw Na zahtev možemo Vam pripremiti ponudu za lizing ili finansiranje. Gospodin Seidel (tel.) će Vam rado pomoći. Više informacija možete pronaći na našem sajtu. ... Greške, izmene i međuprodaja su moguće! = Dodatne informacije = Dozvoljena ukupna masa: 11.900 kg Spoljašnje dimenzije: 0x2550x2500 Dimenzije tovarnog prostora (D x Š x V): 5650x2400x500 Za dodatne informacije kontaktirajte Tobias Ebert.

Stanje: dober (rabljeno), prva registracija: 09/2014, Prikolica za konje Znamka: Humbaur Pegasus Prva registracija: 09/2014 Tehnični pregled nov Dovoljena skupna masa: 2700 kg +talna plošča iz aluminija +sedlarnica z izvlečnim nosilcem +zaščita proti brcanju v sedlarnici in na stranskih stenah +mreža za žrebce +neprekinjena palica Csdpfxeyh Hkns Abvopw +strešno okno +Prikolica je v dobrem, rabljenem stanju Za vprašanja nas lahko kontaktirate.

Stanje: novo, konfiguracija osi: 2 osi, Humbaur HBT 106224 BS Basic tapered Technical data: - Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm - Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm - Permissible total weight: 11,900 kg - Payload: approx. 9,100 kg - Wheelbase: 990 mm - Tyres: 235/75 R17.5 - Loading height: approx. 920 mm - Drawbar length: approx. 1800 mm - Coupling height: approx. 750–1000 mm - Approach angle: approx. 16° - Ramp length: approx. 2600 mm - Ramp width: approx. 540 mm - 3 pairs of lashing rings, 3,000 kg per lashing point (recessed in the platform floor) - 7 pairs of lashing rings, 1,000 kg per lashing point (in the outer frame) Standard features: - Axles from renowned manufacturers - Low-maintenance parabolic suspension with load compensation Cjdpfoyfvg Aox Abvspw - Tyres of manufacturer's choice mounted on steel rims - ABS braking system according to ECE regulations with ALB function - ABS connector ISO 7638 - Spindle parking brake - 2 non-interchangeable coupling heads, red/yellow, ISO 1728 - Drawgear: Drawbar with DIN screwed towing eye Ø 40mm, galvanised, infinitely adjustable via crank - Electrics: 24V lighting system with multi-chamber rear lights and LED side marker lights, 15-pin connector for lighting - Chassis: robust, welded and hot-dip galvanised chassis - Rear area tapered, 12° slope - Floor: 40mm softwood floorboards - Drop sides: anodised aluminium, foldable and removable, galvanised corner posts, plug-in front and rear - Ramps: 2 one-piece foldable steel ramps, galvanised, laterally adjustable, each ramp with gas strut, ramp lock at rear post, ramps with galvanised grating surface - Support: reinforced 12t geared support winch with load and quick action, 2 telescopic folding supports left and right at rear of vehicle - Additional equipment: steel mudguards with anti-spray mats, foldable side underrun protection up to first axle, 2 wheel chocks with holder, contour marking side and rear, space for double-line licence plate on left ramp On request, we can offer you a leasing or financing solution. Mr. Seidel (Tel.) will be happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale! = Additional Information = GVW: 11,900 kg External dimensions: 0 x 2550 x 3260 Please contact Marius Herden for more information.

Stanje: rabljeno, največja dovoljena obremenitev: 1.600 kg, skupna masa: 2.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2013, naslednji pregled (TÜV): 11/2027, dolžina tovornega prostora: 3.447 mm, širina tovornega prostora: 1.714 mm, višina nakladalnega prostora: 2.364 mm, skupna širina: 2.233 mm, skupna višina: 2.800 mm, Humbaur Xanthos Aero 2400 2-horse trailer Horse transporter FULL ALUMINIUM Rotating and swiveling rear ramp Codpfoyhygiox Abvepw year of first registration: 09.11.2013 inspection valid until: 11/2027 Overall dimensions: 4642 x 2233 x 2890 mm Internal dimensions: 3447 x 1714 x 2364 mm Gross vehicle weight: 2400 kg Unladen weight: 800 kg Payload: 1600 kg Loading height: 460 mm Tyres: 15 inch Aluminum floor Aluminum body Polyester roof and bow in silver metallic Lockable tack room with saddle holder and bridle hooks Side kick protection Padded breast and rear bars, adjustable in height and length Lockable central partition Non-slip rear ramp with step-stripe rubber Tinted, 5-position adjustable opening windows with safety bars Exclusive wind deflector for draught-free interior ventilation Entrance door and tack room door with 3-point locking system Equi Drive chassis 13-pin connector with reversing light 8 mm rubber floor, glued and sealed Automatic jockey wheel Maneuvering handle 100 km/h certification !! Largest Humbaur horse trailer center !! Always affordable demo trailers, leasing returns as well as financing returns! Ask us about current payment relief options! Warranty extensions up to 10 years! Current trade-in bonuses for external brands! ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to sell elsewhere, as this item is also offered on other platforms. We strongly recommend viewing and inspection to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible by appointment at any time, and are expressly encouraged!!! Images are similar, may show optional extras subject to surcharge. All internal dimensions are approximate. For new vehicles: prices include statutory VAT plus freight and vehicle documents. Errors and typos excepted, all information without guarantee! TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 to 17:00, Saturday 8:30 to 14:00 Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 2.535 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.700 mm, širina tovornega prostora: 2.180 mm, višina nakladalnega prostora: 200 mm, skupna širina: 2.305 mm, skupna višina: 1.690 mm, Leto izdelave: 2025, * Humbaur MTKA 354722 Allcomfort Tandem * New vehicle * Car transporter * Universal transporter * Dimensions: 6250mm x 2305mm x 1690mm * Internal dimensions: 4700mm x 2180mm x 200mm * Gross weight: 3500kg * Payload: 2535kg * Loading height: 650mm * 13 inch tyres * Bolted, hot-dip galvanized chassis * Welded, hot-dip galvanized tipping platform * Double-acting cylinder for tilting the loading area * Perforated drive-over ramp with gas strut support * Side walls made of anodized aluminium * Lashing points 400kg on outer frame * Optional winch, adjustable in 5 positions transversely * 18mm weather-resistant floor plate * Pulley Csdetnazlepfx Abvopw * 5-position adjustable Optional accessories * MTK wheel stopper * Loose shock absorbers * Mounted shock absorbers * 2 loose extension bars for rear gate * Aluminium side walls 350mm high * Winch, adjustable in 5 positions * Electric winch, adjustable * Aluminium floor * Winch * Tow rope * VAT deductible Available from us in various sizes and specifications! IMPORTANT! PLEASE READ! We expressly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend an inspection and examination to avoid any misunderstandings regarding condition and suitability. Visits and inspections are possible at any time by appointment and are expressly welcome!!! Images may be similar and may include optional, extra-cost equipment. The given internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND ADDITIONAL PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, lastna masa: 3.055 kg, največja dovoljena obremenitev: 8.845 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 11/2019, dolžina tovornega prostora: 5.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6 m³, skupna dolžina: 5.030 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 90 odstotek, barva: bela, Leto izdelave: 2019, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, elektronski program stabilnosti (ESP), registracija tovornjaka, Reference number for inquiries: 81064 Humbaur, HTK 115024 * Year of manufacture: 2019 * ABS (Anti-lock Braking System) * ESP (Electronic Stability Program) * Air coupling head (red + yellow) * Galvanized * Steel tipping body * Suspension: leaf springs * Gross vehicle weight: 11,900 kg * Unladen weight: 3,055 kg * Payload: 8,845 kg * Permissible total weight: 11,900 kg * Tyre condition, 1st axle: 90% remaining - Tyre size: 235/75 R17.5 * Tyre condition, 2nd axle: 90% remaining - Tyre size: 235/75 R17.5 * Tyre size: 235/75 R17.5 Cpodpoyic Huefx Abvjw * Internal dimensions: L = 5,030 mm, W = 2,420 mm, H = 500 mm * Internal volume*: 6 m³ * Pallet spaces: 12 Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos can be found on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documentation * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV certification, registration service * Transfer of commercial vehicles Ask our trained staff – we will be happy to advise you.

Stanje: novo, lastna masa: 690 kg, največja dovoljena obremenitev: 2.310 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,7 m³, barva: drugo, gradbena višina: 970 mm, delovna širina: 1.890 mm, Manufacturer: Humbaur Model: Rear Tipper Tandem HUK 303117 Permissible Gross Weight: 3,000 kg Payload: 2,310 kg Unladen Weight: 690 kg Bed Dimensions: 3,140 x 1,750 x 300 mm Tyres: 13-inch Loading Height: 670 mm Load Area Hydraulically Tiltable via Hand Pump Tipping Angle: 45°, with mesh side extension (600 mm) With AkkuFlex pump, enables tipping using a cordless drill Demonstration trailer at a special price - Chassis and tipping platform welded and hot-dip galvanized - Galvanized loading bed (3 mm) - V-groove outer frame with 4 pairs of recessed lashing rings Cpsdpfx Absx Iv I Tovow - Sidewalls 300 mm – foldable all around - 13-pin plug and reversing lights - Drawbar latches - Tapered corner stanchions - Automatic jockey wheel - Humbaur multifunction lighting integrated into underride guard - 3-stage telescopic cylinder - Hand pump Price incl. vehicle registration document (registration certificate part II and COC papers) We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we will provide a free transit registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical and price changes as well as errors excepted. No liability for mistakes or printing errors. Features: - Automatic reverse mechanism - Rubber suspension axle - Independent wheel suspension - Tiltable load area - Automatic jockey wheel - Marker lights - Galvanized loading bed (3 mm) - Braked - Includes warranty - Chassis and tipping platform welded and hot-dip galvanized - V-groove outer frame with 4 pairs of recessed lashing rings - Sidewalls 300 mm – foldable all around - 13-pin plug and reversing lights - Drawbar latches - Tapered corner stanchions - Humbaur multifunction lighting integrated into underrun protection - 3-stage telescopic cylinder - Hand pump

Stanje: novo, lastna masa: 540 kg, največja dovoljena obremenitev: 2.010 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,7 m³, barva: drugo, gradbena višina: 970 mm, delovna širina: 1.890 mm, Manufacturer: Humbaur Model: Rear Tipper Tandem HUK 273117 Permissible Gross Weight: 2,700 kg Payload Capacity: 2,010 kg Unladen Weight: 690 kg Body Dimensions: 3,140 x 1,750 x 300 mm Tyres: 13 inch Loading Height: 670 mm Load Platform: hydraulically tiltable with electric pump and emergency manual pump Tipping Angle: 45° - Chassis and tipping platform welded and hot-dip galvanised - Galvanised platform floor (3 mm) - V-groove outer frame with 4 pairs of recessed lashing rings - Drop sides 300 mm all around, foldable - 13-pin connector and reversing lights - Drawbar locks - Tapered corner posts - Automatic jockey wheel - Humbaur multifunctional lighting integrated into underrun protection - 3-stage telescopic cylinder - Electric pump with emergency hand pump Price includes vehicle registration certificate (registration certificate part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer license plates. We repair trailers of all manufacturers. Additional accessories available on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Key features: - Reverse-automation - Rubber suspension axle - Independent wheel suspension - Load area hydraulically tiltable with electric pump and emergency hand pump - Automatic jockey wheel - Side marker lights - Galvanised platform floor (3 mm) - Braked Cpedpogi Spzsfx Abvow - Includes warranty - Chassis and tipping platform welded and hot-dip galvanised - V-groove outer frame with 4 pairs of recessed lashing rings - Drop sides 300 mm all around, foldable - 13-pin connector and reversing lights - Drawbar locks - Tapered corner posts - Humbaur multifunctional lighting integrated into underrun protection - 3-stage telescopic cylinder - Hand pump

Stanje: novo, lastna masa: 410 kg, največja dovoljena obremenitev: 890 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.320 mm, višina nakladalnega prostora: 1.520 mm, Leto izdelave: 2026, prevoženi kilometri: 50 km, vrsta prenosa: mehanski, energetska učinkovitost: A, Humbaur HK 132513-15P Box Trailer Car Trailer Condition: New (Year of Manufacture: 2026) 2 years main inspection from the date of first registration Incl. registration papers (vehicle title / registration certificate part 2 and COC) Available from: Immediately (in stock)! Financing available through our partner banks! Technical Data Gross vehicle weight: 1,300 kg Unladen weight: approx. 410 kg Payload: approx. 890 kg Number of axles: 1 Internal load length: 2,510 mm Internal load width: 1,320 mm Internal load height: 1,520 mm Brake type: Braked, overrun brake Chassis: Low loader (wheels mounted next to body), rubber-sprung axle Electrics: 12V, 13-pin plug Tyre size: 185/65 R14 Special Equipment None Equipment Exterior white Lockable rear door incl. door retainer Hand grip Rain channel Tie-down rings flexible along frame profile Phenolic plywood floor Jockey wheel Interior lighting Chassis galvanised Bolted and galvanised frame V-drawbar AL-KO or Knott axle and brake system Optional Accessories (additional cost) 100 km/h certificate incl. retrofitting 2x shock absorbers Opening window Roof vent Double rear doors Rear ramp / drive-on tailgate Rear supports Ventilation slider Spare wheel incl. holder Lashing rail Rub strip 15 cm or 30 cm Slotted anchor rail Side door Sales flap (side mounted) Trailer lock Automatic jockey wheel incl. installation Lashing strap Nationwide delivery in Germany Nationwide registration in Germany Temporary number plates (valid for 5 days) Cjdpfx Abjuchkxevspw Note Weights may vary depending on equipment. Errors, prior sale and changes reserved! Condition, Roadworthiness: roadworthy, Warranty: Manufacturer vehicle warranty

Stanje: novo, lastna masa: 531 kg, največja dovoljena obremenitev: 769 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.515 mm, širina tovornega prostora: 1.330 mm, višina nakladalnega prostora: 1.685 mm, Leto izdelave: 2026, prevoženi kilometri: 50 km, vrsta prenosa: mehanski, energetska učinkovitost: A, Oprema: hladilna enota, Humbaur HK 13 26 14 - 18 PF30 Basic Refrigerated Trailer / Refrigerated Box Car Trailer Condition: New (Year of manufacture: 2026) 2 years main inspection from the date of first registration Including registration documents (vehicle registration certificate part 2 and COC) Available: Immediately (in stock)! Financing available through our partner banks! Technical Data Permissible total weight: 1,300 kg Unladen weight: approx. 531 kg Payload: approx. 769 kg Number of axles: 1 Internal loading length: 2,515 mm Internal loading width: 1,330 mm Internal loading height: 1,685 mm Brake type: Braked, overrun brake Chassis: Low loader (wheels beside superstructure), rubber spring axle Electrics: 12V, 13-pin connector Tyre size: 185/65 R14 Cpjdpsuchk Sjfx Abvjw Optional Equipment Connection cable for refrigeration unit 15cm scuff rail Standard Equipment Refrigeration unit Exterior white Lockable rear door incl. door retainer Hand grips Rain gutter Lashing rings in the frame profile, flexibly adjustable 30 mm thick PurFerro sandwich construction Plywood floor panel Automatic jockey wheel Interior lighting Galvanised chassis Frame bolted and galvanised V-drawbar AL-KO or Knott axle and brake system Accessories (at extra cost) 100 km/h certificate including retrofitting with 2 shock absorbers Airline track Connection cable for refrigeration unit Double rear doors Rear supports Insulated floor panel Internal box height 188.50 cm Spare wheel incl. spare wheel holder Bar lashing rail Scuff rail 15 cm or 30 cm Slotted anchor rail Door contact switch for interior lighting Trailer lock Lashing strap Nationwide vehicle delivery Nationwide registration Temporary registration plates (valid for 5 days) Note Weights may vary depending on equipment. Subject to errors, prior sale, and changes! Condition, roadworthiness: roadworthy Warranty: Manufacturer’s vehicle warranty

Stanje: novo, lastna masa: 9.650 kg, največja dovoljena obremenitev: 30.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.740 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 4-AXLE LOWBED TRAILER WITH TOP EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => ANTI-SLIP STRIPS ON THE REAR INCLINE OF THE RAMPS => 6 LASHING POINTS IN THE EXCAVATOR ARM TROUGH AT THE REAR SECTION => LONG ONE-PIECE LOADING RAMPS => LOW APPROACH ANGLE Perm. gross vehicle weight 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized in immersion bath Bogie frame hot-dip galvanized in immersion bath Cpedpjhvxgzofx Abvow Loading ramps hot-dip galvanized in immersion bath Air suspension SAF axles with drum brakes EBS electronic braking system Tyres 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Trough for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm at rear section of lowbed 4 pairs of 10 t recessed lashing rings in lowbed 2 pairs of 10 t recessed lashing rings in highbed 4 pairs of 3 t lashing points in external frame of lowbed 3 pairs of 6 t lashing eyes on external frame 4 pairs of stake pockets in outer highbed frame 4 pairs of stake pockets in outer lowbed frame 3-metre widening package with folding outriggers, without slope 4 warning signs with lighting Rotating warning beacon at rear LARGE STEEL TOOLBOX under cargo bed 2 storage compartments with folding covers in high platform Hydraulic ramp lifters 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for cargo bed and ramps 40,000 kg GVWR only with exemption permit according to §70 => Freight costs for delivery: €2.90 plus VAT per km => Prices ex D-86368 – Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Subject to prior sale and modifications!* *Price valid ex D-86368 – Gersthofen* *Sale to business customers only!* *Images may differ and are for rough orientation only => images may show/contain accessories subject to extra charge*

Stanje: novo, lastna masa: 6.700 kg, skupna masa: 30.000 kg, dolžina tovornega prostora: 8.550 mm, širina tovornega prostora: 2.540 mm, Leto izdelave: 2026, Oprema: spojka prikolice, HTD30K- RM-BM / Air Suspension Technical Data: Cpsdpsq Ulaqofx Abvow Internal dimensions: approx. 8,550 mm x 2,540 mm Overall dimensions: approx. 10,900 mm x 2,540 mm x 3,790 mm Permissible total weight: 24,000 kg Payload: approx. 17,300 kg Tyres: 235/75 R17.5 twin, inches Loading height: approx. 900 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 800-980 mm Plank length: approx. 3,150 mm Plank width: approx. 750 mm Permissible total weight (special approval): 30,000 kg Payload (special approval): approx. 23,300 kg Low-bed length: approx. 6,500 mm Overall length (B-dimension): 10,800 mm Technical total weight: approx. 33,000 kg 8 pairs of lashing rings, 3,000 kg per lashing point Lashing rings on the outer frame 3 pairs of lashing rings, 10,000 kg per lashing point Lashing rings recessed in the low-bed 2 pairs of lashing rings, 10,000 kg per lashing point Lashing rings recessed in the high-bed 4 pairs of lashing rings, 2,000 kg per lashing point over the wheel recesses on 2nd and 3rd axle 7 pairs of lashing rings, 3,000 kg per lashing point Stake pockets (90x50 mm) with lashing facility Standard Equipment: Axles Low-loader axles from renowned manufacturers Suspension Air suspension module, including lifting and lowering, effective on the rear axle unit Braking system Braking system according to EU guidelines with EBS 4S/3M, multivoltage version (12-24V), spring-loaded parking brake including 2 external test ports for brake/modulator and airbag pressure Electrics LED lighting with indicator function for side marker lights, multivoltage (12-24V) Turntable Robust welded construction with low-maintenance ball bearing turntable ring Drawgear Drawbar with 8° inclined, height-adjustable draw-eye, Ø40 mm Low-maintenance silent bushings Frame Robust welded construction from high-tensile fine-grained steel Continuous cross members for maximum stability Wheel recesses front (top length approx. 2,170 mm) and rear (top length 1,280 mm), depth 330 mm Excavator recess (length 2,090 mm, width 750 mm, depth 185 mm) Maximum safety during loading and unloading Floor 50 mm softwood decking Ramps Single-piece, hot-dip galvanized access ramps (3,100 mm x 750 mm) with 50 mm softwood decking, laterally adjustable Direct-acting, upright spring-lifters for effortless operation Optimal safety via tension lock and counter stop Finish Chassis and turntable frame hot-dip galvanized by immersion Supports 2 folding supports at the rear left and right on the vehicle tail Equipment Folding side underrun protection Other Retro-reflective line marking according to ECE Regulation R48, white on the sides, red on the rear Wheel recess cover at the front with 2 pairs of stake pockets, without covering (cover retractable underneath the longitudinal beams) Hardwood covering for front wheel recess covers Wheel recess cover Hardwood covering for rear wheel recess covers Storage box at the top front of the platform, with folding cover, size approx. L 700 x W 810 x H 140 mm LED warning package, HTD cranked Aspöck warning boards, fourfold, electrical system and rotating beacon 3 m equipment package without ramp incline for HTD30K wheel recesses with low-bed 6,500 mm, folding extension with spruce planks for the flat part of the low-bed Basic hydraulics for trucks with rear connection, Max. operating pressure 200 bar and up to 150l/min with 2-circuit hydraulic connection and return line with quick-coupling SVK BG3 Hydraulic side-shift of ramps by approx. 300 mm each Hydraulic ramp lifter fo

Stanje: novo, lastna masa: 4.800 kg, največja dovoljena obremenitev: 16.200 kg, skupna masa: 21.000 kg, dolžina tovornega prostora: 6.540 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, Leto izdelave: 2026, Oprema: ABS, Air suspension with lift/lower function SAF low-bed trailer axles Twin tyres 235/75 R 17.5 EBS electronic braking system 6 flush-mounted 10 t lashing rings in the floor 14 lashing rings (2 t) in the outer frame Gearbox support winch with load and fast gear Rear support: 2 foldable supports on the chassis frame Ramps approx. 3100 mm long and approx. 750 mm wide, laterally adjustable Decking with wooden flooring and steel chequer plate above the wheels Wooden flooring in the ramps Spring-assisted ramp lifters Aluminium side walls with central stanchions Hot-dip galvanised steel front wall Stepless height-adjustable drawbar Coupling height approx. 800 - 1000 mm Cpsdpfx Aoi Dqn Rjbvjw DIN drawbar eye d= 50 mm Rear loading area tapered Mudguards with antispray system Additional equipment available on request at any time Collection ex works or delivery Price per km: €2.90

Stanje: novo, lastna masa: 5.680 kg, največja dovoljena obremenitev: 18.320 kg, skupna masa: 24.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, Leto izdelave: 2026, Oprema: ABS, Three-axle trailer BPW low-loader axles Electronic air suspension with 2 ride heights Lowering function for safe loading Brake system compliant with EC regulations with 2S/2M Drawbar with 50 mm towing eye Raising and lowering of the drawbar 8 pairs of 10 t lashing rings recessed in the low-bed 6 pairs of 2 t lashing points above wheel cutouts 5 pairs of 3 t lashing/pocket sockets for 90x50 mm stanchions 50 mm softwood floor Chassis frame hot-dip galvanized by immersion bath Foldable side underrun protection Stanchion pocket package in outer frame One-piece hot-dip galvanized access ramps Codpfx Aeh I H Ddebvjpw Laterally adjustable Direct-acting vertical spring supports

Stanje: novo, lastna masa: 2.500 kg, največja dovoljena obremenitev: 8.400 kg, skupna masa: 10.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 250 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2024, Oprema: ABS, Construction Machinery Tandem Low Loader HS 115020BS HOT-DIP GALVANIZED Equipment: • Permissible total weight: 10,900 kg • Payload approx. 8,410 kg • Loading area approx. 5,000 x 2,010 mm • Loading ramps with grating surface, hot-dip galvanized • Fixed drawbar • Reinforced 25 t mechanical support winch with load and fast gear (no jockey wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing brackets in the outer frame (2,000 daN per pair) • 2 folding supports at the rear of the vehicle • ABS braking system • Steel mudguards, hot-dip galvanized • Decking made of wood • Chassis frame including superstructure hot-dip galvanized (immersion bath) => Freight costs for delivery: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and modifications!* *Price valid ex works D-86368 Gersthofen* *Images may differ and are for general reference only — may show/contain optional accessories at additional cost* Cjdpfxehmm Rns Abvjpw

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 10.000 kg, skupna masa: 13.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.250 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2026, Oprema: ABS, HUMBAUR Construction Machine Transporter Tandem Flatbed REAR LOADING AREA ANGLED DOWNWARDS HBT 136224BS / Hot-dip galvanized / Aluminium side panels Cjdpfxohmm Rke Abvepw Chassis frame hot-dip galvanized in immersion bath Aluminium side panels anodized Equipment: • Tandem low-loader (construction machine/material transporter) • Rear loading area with downward slope • Permissible total weight: 11,900 kg • Payload: approx. 9,010 kg • Loading area: approx. 6,200 x 2,460 mm • Platform floor made of approx. 40 mm softwood planks • Aluminium side panels, 400 mm high, anodized • Reinforced 25 t gearbox support winch with load and rapid gear • Fixed drawbar • Coupling height: approx. 750 - 1,000 mm • 3 pairs of recessed 3 t lashing rings (3,000 daN) • 6 pairs of recessed 1 t lashing points (1,000 daN) in outer frame • 2 telescopic folding supports at the rear • ABS dual-circuit air brake system • One-piece ramps, hot-dip galvanized, approx. 2,400 mm long and approx. 520 mm wide, with galvanized STEEL GRATING • Mudguards • Anti-spray system • Ø 40 mm DIN towing eye • Aluminium side underrun protection • Approach angle only approx. 16° • Unladen loading height only approx. 920 mm Optional at extra cost: • Plastic toolbox under loading area • Extra charge: €290 plus VAT. => Delivery freight costs: €2.90 plus VAT per km => Prices ex D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL Vehicle Manufacturing *Subject to prior sale and changes!* *Price valid ex D-86368 - Gersthofen* *Sale to commercial customers only!* *Images may differ and are for general reference only => may show accessories at extra cost*

Stanje: novo, lastna masa: 7.500 kg, največja dovoljena obremenitev: 32.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 03/2023, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 235/75r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, TOP EQUIPMENT – INCLUDING THE FOLLOWING ACCESSORIES: Chassis frame hot-dip galvanized in immersion bath Front storage box on platform, with hinged lid Rear storage box on platform, with hinged lid Recess for excavator arm storage, lowbed – rear section Cpodpfoglblljx Abvow 3 m equipment package without ramp incline Warning package for special permit Steel sheet toolbox Stake pocket set in outer frame Basic hydraulics for truck with rear connection Hydraulic ramp lift for one-piece ramps Hydraulic lateral ramp shift Hydraulic support legs left and right 1 pair of 6t lashing rings bolted to outer frame WABCO Smart Board pre-configured Complete SSV front left HTD409525K COC certificate of conformity OPTIONAL Rubber flooring on ramp €1,890 net Rubber flooring on the incline €1,250 net Adjustable drawbar 40 / 50 DIN

Stanje: novo, lastna masa: 10.650 kg, največja dovoljena obremenitev: 39.350 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.830 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 5-AXLE SWIVEL-DOLLY LOWBED TRAILER, HOT-DIP GALVANIZED => FULL AIR SUSPENSION => HOT-DIP GALVANIZED IN TOP CONFIGURATION!! * LIFT AXLE * SELF-STEERING AXLE • SAF – LOWBED AXLES • AIR SUSPENSION • ONE-PIECE LONG ACCESS RAMPS • HYDRAULIC RAMP LIFTER • HYDRAULIC REAR SUPPORTS Cpodpfxohmm Rcj Abvow • HYDRAULIC SIDE SHIFT • HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE • EXCAVATOR ARM TROUGH • CHASSIS AND TURNABLE FRAME HOT-DIP GALVANIZED • OUTER FRAME ADDITIONALLY PAINTED IN RED • RAMPS HOT-DIP GALVANIZED • 10 t LASHING POINTS RECESSED IN DECK • 3 t LASHING POINTS IN OUTER FRAME (HIGH DECK) • 6 t LASHING POINTS IN OUTER FRAME (LOWBED) • 4 PAIRS OF 3 t LASHING POINTS IN OUTER FRAME (LOWBED) • LASHING POINTS IN EXCAVATOR ARM TROUGH • 3 METER WIDENING PACKAGE • FOLDING SUPPORT ARMS • WOODEN BOARDS IN STEEL BOX UNDER THE DECK • SECOND STEEL TOOLBOX UNDER THE DECK • WARNING SIGNS • REVOLVING BEACON AT REAR • ANTI-SLIP STRIPS AT REAR • 2 TOOLBOXES IN HIGH DECK • DIGITAL AXLE LOAD DISPLAY • WABCO SMARTBOARD • AIR SUSPENSION • LIFT-LOWER VALVE AT REAR (REAR LOWERING FOR LOADING/UNLOADING) • STAKE POCKETS IN OUTER FRAME • TWO STAKE POCKETS INCLUDING INSERTABLE STAKES AT FRONT WALL • EBS – ELECTRONIC BRAKING SYSTEM B-DIMENSION = approx. 11,790 MM => Freight charges for delivery: €2.90 plus VAT per km => Prices valid ex D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL VEHICLE MANUFACTURING *Intermediate sale and changes reserved!* *Price valid ex D-86368 - Gersthofen* *Sales to business customers only!* *Images may differ and serve only for general orientation => may include/show accessories for an additional charge*