Doll Prevoznik Lesa nakup rabljenega (79)

Stanje: rabljeno, skupna masa: 16.000 kg, lastna masa: 3.400 kg, največja dovoljena obremenitev: 12.600 kg, konfiguracija osi: 2 osi, prva registracija: 01/1981, vzmetenje: jeklo, velikost pnevmatike: 12R22.5, Leto izdelave: 1981, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, skupna dolžina: 2.500 mm, skupna širina: 2.550 mm, voznikova kabina: drugo, Vehicle location: Bovenden, 2 axles, BPW axles, leaf suspension, twin tires. Self-steering axle. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to modifications, prior sale, and errors! Dsdpsi Rqk Eefx Ab Noku

Stanje: novo, skupna masa: 45.000 kg, lastna masa: 13.200 kg, največja dovoljena obremenitev: 31.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, barva: črn, velikost pnevmatike: 245/70 r 17.5, Oprema: ABS, Detachable gooseneck "Segmenti": Dkodslhqq Sjpfx Ab Nou - Hydraulically detachable gooseneck with external main frame, featuring integrated steering pick-up and individually operated push-off cylinders. - Integrated hydraulic cylinders and support arms for lifting and lowering the lowbed (support on the truck required). - Line connections to the lowbed each mounted inside the main frame kinks. - Holder for locking bolts. - Ladder with handrail for safe access. - All valves and distribution boxes are easily accessible and covered with aluminum panels. - Universal support arm for lifting and lowering the lowbed. - 6-way hydraulic coupling without relief valve for easy separation of hydraulic lines. - Duomatic air connection - 7-pin EBS electrical connector - 15-pin power supply connection - 10-pin control connection - 1 pair of plastic support pads for the lowbed without lateral holders. - 2 pairs of cut-outs for attaching hooks, 2000 daN lashing force. - 1 pair of swiveling lashing rings, 13,400 daN lashing force, mounted underneath the support arm. - 4 pairs M16 threaded holes for screw-in lashing points, 2000 daN lashing force, in the open outer frame. Lowbed (flatbed): - Telescopic flatbed frame. Frame pre-stressed for maximum payload, reduced payload in telescopic positions. - Outer side executed as an open U-profile. - Prepared for load area extensions. - Telescoping steps approx. every 500 mm + container positions. - Mechanical frame lock on the flatbed frame. - 7 pairs of swiveling lashing rings, 13,400 daN lashing force. - 5 pairs of stake pockets 100x50 mm in the outer frame. - 3 pairs of M36 threads on the outside of the telescopic frame for screw-in lashing brackets. - Prepared for the installation of container locks. - 2x 13,400 daN lashing rings welded onto the outer adapter facing the lowbed. Chassis platform: - Short wheelbase steel welded structure with rear-closed excavator well (baggermulde). - Drop to the lowbed, 300 mm x 15° chamfered, with 3 pairs of holes on the slope and rear for inserting approach ramps via locking pins. - Different track widths possible via three different hole positions. - Smooth steel floor with sand blasting welded over the axles, max. 8000 kg wheel load. - End cross member with cut-outs for lighting, designed as underrun protection according to ECE R58-003. - Powerbox with hydraulic control and electrical distribution installed at the rear of the excavator well. - Aluminum cover (approx. 500 mm) mounted over the powerbox. - Controls mounted at the rear. - 1 pair of lashing eyes, 2000 daN, recessed in the outer frame at the corners. - 2 pairs of swiveling lashing rings, 13,400 daN, in the outer frame. - 2 pairs of stake pockets 100x50 mm recessed in the outer frame. Floor: - 45 mm spruce timber floor between the flatbed frames Chassis: - DOLL Panther-technology with split and suspended axles, BPW brakes, and ECO hub system. - All axles 12 t, with ABS, AGS (automatic slack adjuster). - All axles hydraulically forced steered, up to 55° steering angle on the last axle. - All grease points connected to central lubrication system. Tires: - 8 x 245/70 R 17.5 on steel rims Suspension: - Double wishbone suspension with hydraulic damping units. - Lifting-lowering system with 315 mm total stroke (-70/+245). Hydraulic Forced Steering: - Hydraulic dual-circuit displacement steering. Steering pick-up mounted on a turntable at the fifth-wheel coupling.

Stanje: rabljeno, skupna masa: 18.000 kg, največja dovoljena obremenitev: 14.050 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.300 mm, prva registracija: 11/2014, naslednji pregled (TÜV): 08/2023, Oprema: ABS, * ABS * BPW ECO-Plus axles * 5-chamber rear lights Dedsk Afi Repfx Ab Noku * Duomatic air connection ----Body: Doll short wood body with 4 Doll Mammut stanchion pairs. Sale only to businesses. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, pro forma invoices, orders, and sales discussions are our General Terms and Conditions (see legal notice/imprint).

Stanje: rabljeno, skupna masa: 38.000 kg, največja dovoljena obremenitev: 24.640 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.100 mm, širina tovornega prostora: 3.000 mm, prva registracija: 08/2009, Leto izdelave: 2009, skupna širina: 2.550 mm, Oprema: ABS, Doll T2H-S3 excavator bed low loader with detachable gooseneck First registration, BPW Eco axles Hydraulically steered with radio remote control Air suspension Drum brakes with ABS and EBS Tyres: 245/70 R17.5 approx. 35% Dedjvpm Nrjpfx Ab Nsku Gross weight: 38,000 kg, unladen weight: 13,360 kg, payload: 24,640 kg Maximum deck length: 670 + 540 cm Gooseneck: 405 cm Rear section: 275 cm Width: 255 + 2x30 cm Low bed height: 46 cm Loading height rear: 94 cm Excavator trough. Errors/mistakes and prior sale reserved.