Kässbohrer Hladilni/Izolacijski/Osvežilni Servisni Zaboj nakup rabljenega (142)

Stanje: rabljeno, največja dovoljena obremenitev: 34.620 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, dolžina tovornega prostora: 19.450 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna dolžina: 13.600 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2020, Oprema: ABS, Kaessbohrer LB3E, polprijokolica (teleskopska) Prva registracija: 30. 01. 2020 BPW Eco osi Itjdpfjzw R Tajx Alnjn 1 x dvižna os 1 x zadnja os Bobnaste zavore z ABS in EBS Zračno vzmetenje Pnevmatike: 245/70 R17,5, 30 % Skupna masa: 48.000 kg, prazna masa: 13.380 kg, nosilnost: 34.620 kg Dolžina gooseneck prikolice: 4,25 m, dolžina platforme: 9,24 m + 6,0 m (teleskopsko podaljšanje do 15,24 m). Širina platforme: 2,55 m + 2 x 30 cm. Višina nakladalne površine: 89 cm. Hidravlično upravljane dvižne rampe s stranskim pomikom Opra: na zadnji strani Ojačitve za pritrditev tovornega pasu Žepi za podpore

Stanje: novo, največja dovoljena obremenitev: 37.581 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Locking position for extension: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tons - Total width: 2,550 mm - Technical gross weight (80 km/h): 48,000 kg - Technical gross weight (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2x fixed axles at the front, 1x trailing steering axle at the rear - Air suspension with load gauge - Wabco braking system - Tyres: 12 units, size 245/70 R17.5 CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions, extendable up to 300 mm - Telescopic rear stabilizer with 50 ton capacity - Rear mechanical folding supports with 45 ton capacity - Wheel recesses dimensions: 420 mm deep, 800 mm wide - Suitable for tyre diameter up to 1,800 mm Iodpfx Alemtwypjnjtn RAMP: - Ramp receptacles at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft, 1x40 ft, or 1x45 ft + 4 twist locks - Front wall made of steel, height 1,500 mm, Code XL certified ACCESSORIES: - 1x plastic toolbox - Stake box with capacity for 18 stakes - 1x rotating beacon - Wheel recess bridge for closing the recesses Chassis colour: RAL 3020 Traffic Red For further information, we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 34.815 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer SPA Mega Extendable HD Platform Trailer Immediately Available TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm platform extension - Extension locking positions: 500 mm intervals - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Overall width: 2,550 mm - Gross technical weight (80 km/h): 45,000 kg - Gross technical weight (60 km/h): 46,000 kg - Unladen weight: 10,185 kg CHASSIS: - BPW axles with air suspension and disc brakes - 2x rigid front axles, 1x rear trailing steering axle - Air suspension including load gauge - 1st axle liftable - Wabco braking system - Tyres: 445/45 R19.5 - 1x spare wheel carrier FRAME: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm hardwood floor - 8x2 extendable side extensions up to 300 mm - Telescopic support winch at front with 50t capacity - Mechanically folding rear supports with 45t capacity RAMPS: - Provisions for ramps at the rear of the vehicle Itjdel N Syvepfx Alnon LOAD SECURING: - Lashing rings - Stake pockets - Container locks suitable for 1x20 ft, 2x20 ft, 1x40 ft, 1x45 ft - Steel front wall, 1,700 mm high, with Code-XL certificate ACCESSORIES: - 1x stainless steel toolbox - Stake holder at front wall - 2 x 2 oversize signs with LED lighting - Rotating beacon Chassis colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Stanje: novo, največja dovoljena obremenitev: 39.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 875 mm, Oprema: ABS, Kässbohrer SLS 3 ECO – robustna, nizka prikolica | od 59.900 EUR – novo vozilo / vozilo iz zaloge / v poti – lahko tudi individualno konfigurirana glede na vašo uporabo. Kässbohrer SLS 3 ECO je robustna in ekonomična, nizka prikolica za vsakodnevno uporabo pri transportu strojev, gradbenih materialov in specialnih tovorov. Zaradi nizke višine nakladalne površine, stabilne konstrukcije iz visokokakovostnega jekla S700 MC in preizkušene tehnologije Kässbohrer ponuja to vozilo maksimalno nosilnost ob tem pa tudi dolgo življenjsko dobo in enostavno upravljanje. Pomembne lastnosti: * Nizka višina platforme za enostno nakladanje in razkladanje * Robustna konstrukcija iz jekla S700 MC * Visoka nosilnost ob optimirani lastni teži * 3-osna podvozna konstrukcija z osmi BPW in zračno vzmetjo * Hidravlično vodene nakladalne rampe z visoko nosilnostjo * Sistem za razširitev za prilagodljivo širino transporta Tehnični podatki: * Višina sedla: pribl. 1.250 mm * Dolžina platforme: pribl. 9.240 mm * Dolžina podaljška: pribl. 3.950 mm * Višina platforme: pribl. 875 mm * Zunanja dolžina: pribl. 13.190 mm * Skupna širina: 2.550 mm + razširitve * Osi: 3 × BPW z zračno vzmetjo * Nosilnost osi: 30.000 kg (3 × 10 t) * Dovoljena skupna masa: * 48.000 kg pri 80 km/h * 52.800 kg pri 60 km/h * Prazna teža: pribl. 9.766 kg Podvozje in tehnika: * 2 fiksni osi spredaj, 1 sledilna os zadaj * Ročni sistem za dvig osi na prvi osi * Zavorna sistema WABCO EBS 4S/3M z ABS & RSS * LED osvelitev po standardu ECE R48 * 24V električni sistem z več vtičnicami Nadgradnja in oprema: * 45 mm trdni leseni pod * Podaljšek s stabilno jekleno konstrukcijo * Mehanske opore spredaj in zadaj * Zadnji del z 10° nagnjenim nakladalnim kotom * Nakladalne rampe: * Nosilnost do 40 t * Dolžina pribl. 2.750 mm * Hidravlični drsni sistem Varnost tovora: * Privezne točke v podaljšku in na platformi (5.000 – 10.000 daN) * Žepi za pritrditev vzdolž platforme * Žepi za zaklepanje kontejnerjev za 1×20 ft * Razširitve izpodrinjave Dodatna oprema: * Orodjarna omara iz jekla * Okrogla rotacijska luč * LED delovna luč zadaj Ijdpfoypa Acox Alnjtn * Plošče za razširitev, vključno z LED pozicijskimi lučmi * Klini s držalom Dodatne informacije: Še več dodatne opreme in individualne prilagoditve so na voljo kadar koli – konfiguriramo vaše vozilo natančno glede na vaše zahteve. Primer fotografije. Oprema se lahko razlikuje glede na konfiguracijo.

Stanje: novo, največja dovoljena obremenitev: 36.565 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Brand-new Kässbohrer SPS Mega Heavy-Duty Platform Semi-Trailer – Immediately Available! Technical Data: * Fifth-wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,550 mm * Gross vehicle weight rating [80 km/h]: 45,000 kg * Gross vehicle weight rating [60 km/h]: 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * Wabco braking system * Tyres: 445/45 R 19.5 Frame: * Chassis manufactured from high-grade S700 MC steel, compliant with ISO 1726 * 30 mm hardwood floor with 2 mm Omega-profile reinforcement * 8x2 units of side extensions, adjustable up to 300 mm Itjdpfjrukt Rjx Alnen * Landing gear at the front, foldable supports at the rear Ramp: * Ramp mounts at the rear of the vehicle * Rear ramp storage box Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container lock pockets (suitable for 1x20 ft, 2x20 ft, 1x40 ft containers) + 2 x 2 pcs. container locks * Steel front wall, 1,500 mm high, with Code XL certificate Accessories: * 1x stainless steel toolbox * Stake storage box Chassis colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 38.210 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna dolžina: 13.600 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2020, Oprema: ABS, Kaessbohrer LB3E, polprikolice z dvižnimi ploščami Prva registracija: 30. 06. 2020 Osnova BPW Eco Plus Itedpfx Alszwrr Renon Dvižna os Bobnaste zavore z ABS in EBS Zračna vzmetenje Pnevmatike: 245/70 R17,5, 35 % obrabe Skupna teža: 48.000 kg, prazna teža: 9.790 kg, nosilnost: 38.210 kg Dolžina podaljška: 4,10 m Dolžina nizke platforme: 9,00 m Širina: 2,55 m + 2 x 30 cm Višina nakladalne platforme: 89 cm Dvižne plošče s stranskim pomikom Podpora zadaj Ojačitve za privez Napake in spremembe zaradi tiska so možne. Prodaja je pogojena z razpoložljivostjo.

Stanje: novo, največja dovoljena obremenitev: 30.015 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.960 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.STN L 30 Stainless Steel Tank Semi-Trailer 30 m³ for Slurry TECHNICAL INFORMATION: - Overall length: 9,180 mm - Height (empty vehicle): 3,960 mm - Wheelbase: 5,000 mm - Rear overhang: 3,050 mm Itedpfxoun Em No Alnsn - Fifth wheel height: 1,320 mm - Tank diameter: 2,200 mm TECHNICAL DATA: - Volume: 30.0 m³ - Unladen weight: 6,045 kg - Axle load capacity: 27,000 kg - King pin load capacity: 12,000 kg - Operating temperature: 80°C - Test pressure (+H Bar): 0.5 bar - Gross vehicle weight: 39,000 kg TANK: - Cylindrical tank body with a slope to prevent residual quantities in the tank, made of AISI 304 (DIN 1.4301) stainless steel - Number of manholes: 1 pc. - Manhole size DN450, 4-bolt fastener with hinged dome cover - Aluminum walkway - Access ladder on the left side of the tank - 1 x 5 m hose storage, top-open large aluminum box - Straight flange pre-installed for cleaning pipe - 1 x 8" pipe with flange at the rear top of the tank for suction/discharge - 1 x 8" pipe with square flange front right for installation of a fill level indicator - 6" connection for vent line prepared - Preparation for pressure valve - Preparation for vacuum valve & vacuum DISCHARGE SYSTEM: - At the rear, a transparent hard plastic pipe (4" diameter) allows the fill level to be read from outside - 1 x 8" plastic filling funnel in front of the suction pipe at the rear top of the tank - Börger FL1036 hydraulic pump with carbon steel housing - For discharge by pump, a 6" Perrot coupling with hook closure, as standard for slurry tankers, is fitted to the discharge pipe - The discharge outlet is fitted with a manually operated 6" brass gate valve - At the inlet of the mixing line inside the tank, 1 x 4" pneumatically operated shut-off gate valve; 1 x pneumatically operated 8" brass gate valve at the suction line inlet - 1 x pneumatically operated 6" brass vent valve - When discharging with the pump, a 6" swivel joint allows directing the discharge outlet at the vehicle rear to left, right, or center - 2 x 6" pneumatically operated gate valves CHASSIS: - Chassis made from special aluminum alloy ensuring high quality and strength - BPW axles, 3 x 9 tons, with air suspension and disc brakes - 1st axle liftable - Aluminum landing legs - Tyres: 385/65 R 22.5" - Aluminum rims - KNORR-ILVL electronic air suspension ECAS MISCELLANEOUS: - 1 bracket for pump connection, welded to the frame - Underrun protection in accordance with regulations COLORS: - Chassis: MB 7350 Nova Grey (glossy) - Tank: RAL 9005 Black Tank painted BLACK. Photos may show differing equipment. Only the specifications listed in the build description are binding!

Stanje: rabljeno, največja dovoljena obremenitev: 32.090 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2027, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.685 mm, Leto izdelave: 2023, Oprema: ABS, Kässbohrer cisterne STC 30, koda L4BH Chemie Prva registracija 01/2023 nemška registracija, vozilo iz prve roke Ø Prazna teža 6.910 kg Ø Šasija iz nerjavečega jekla, polirana Ø Osnova BPW z velikimi kolutnimi zavorami, 430 mm Ø 1. os je dvižna os (LIFTACHSE) Ø Ročne opore, jeklo, za polno obremenitev Ø 6 pnevmatik 385/65 R 22.5, globina profila 70 do 80 % Ø Aluminijasta platišča Ø KNORR prikolica - EBS Ø Rezervoar 30.000 litrov iz nerjavečega jekla 1.4571 AISI 316 Ti Ø Delovni tlak 3,0 bar / preizkusni tlak 4,0 bar Ø Izolacija 100 mm steklena volna Ø 1 predel z 3 pregradami Ø 4 pokrova Ø 1 ventil za odzračevanje Fort Vale Ø 1 varnostni ventil Ø 1 povratni ventil Ø Zračna cev na desni strani, DN 50, s priključkom TW 50 na desni sprednji strani Ø Priprava za gretje, 4-kanalni sistem tople vode Ø 1 iztok DN 100, neizoliran, s ventilom za vzorčenje na desni zadnji strani in priključkom TW 80 Ø 1 naprava za izpihovanje zraka Itjdpfx Alozkybmenjn Ø pnevmatski ventil na dnu Ø cevi na levi in desni strani, DN 150, približno 6 m dolge NAJEM je nova oblika NAKUPA, pri nas je na voljo tudi v obliki najema s celostno storitvijo.

Stanje: novo, največja dovoljena obremenitev: 26.950 kg, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, prostornina tovornega prostora: 27 m³, skupna širina: 2.550 mm, skupna višina: 3.170 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer SKS steel half-round tipper body 27 m³ | Hardox | electric tarpaulin Manufacturer: Kässbohrer Model: SKS B / 27 - 15 / 18 Approval: Germany Condition: New / Built-to-order vehicle ---Body & Specs--- * Capacity: 27.0 m³ * Gross vehicle weight: 33,000 kg * Unladen weight: approx. 6,050 kg * Body length: 8,000 mm * Total length: 9,030 mm * Width: 2,550 mm * Height: 3,170 mm * Fifth wheel height: 1,220 mm ---Tipper Body & Material--- * Half-round steel tipper body made from Hardox / HB450 * Plate thickness: * Floor: 5 mm * Sides: 4 mm * Front & rear: 4 mm * Rear door with rubber seal and screw clamps, mud-tight * Additional mechanical tailgate * 5-stage HYVA tipping cylinder (250 bar) * Automatic safety brake when the body is raised * Tipping warning system for uneven ground ---Electric Tarpaulin System--- * Electric tarpaulin (650 g/m²) * Operated via vehicle-mounted switches and remote control * Tarpaulin certified to fire safety standard ISO 3795 * Colour: RAL 3002 Carmine Red ---Chassis & Technology--- * High-strength S700 MC steel chassis * KTL coating – 10-year corrosion protection * 2 BPW axles with disc brakes (9 t each) * Lift axle, automated & manually controllable * WABCO EBS 2S/2M with ABS & RSS * Electronic air suspension * WABCO Smartboard (axle load, braking, tires, error diagnostics) Itsdpsx I Twfofx Alnsn ---Tyres--- * 385/65 R22.5 * Premium European tires * Steel rims * M+S tires * Matching mudguards & splash guards ---Lighting & Safety--- * ASPÖCK Europoint III LED lighting * LED work lights at rear * Aluminium side underrun protection * Steel underrun protection (ECE R58.3) * Tire pressure monitoring system (TPMS) ---Additional Equipment--- * Body-fix system (reduced vibration & noise) * Aluminium boarding ladder * Document box at the front * Kässbohrer logos on sides & rear * Yellow/Red coupling ---Colours--- * Chassis: MB 7350 Novagrau * Body: RAL 9005 Jet Black * Tarpaulin: RAL 3002 Carmine Red

Stanje: novo, največja dovoljena obremenitev: 29.600 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 32 m³, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Stainless Steel Tank Semi-Trailer for Bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR certified for hazardous goods transport * ADR Tank Code: L4BH * Tank diameter: 2,000 mm * Overall length: 11,250 mm * Height: 3,600 mm * Wheelbase (WB): 6,300 mm * Axle spacing (A): 1,310 mm * Rear overhang: 3,580 mm * Fifth-wheel height: 1,220 mm TECHNICAL CAPACITY: * Volume: 32.0 m³ * Tare weight ±3%: 6,400 kg * Axle load: 27,000 kg * King pin capacity: 12,000 kg * Operating temperature: 250 °C * Test pressure: 4.0 bar * Working pressure: 2.0 bar * Total permissible weight: 39,000 kg TANK: * Cylindrical tank body with slope to prevent product residue, made from AISI 321 (DIN 1.4541) stainless steel, ADR code L4BH * Vacuum valve, working pressure 0.21 bar * 1 x thermometer included * Number of compartments: 1 section * Insulation thickness: tank insulated with 100 mm glass wool * Insulation sheathing: aluminum coating, CTP bomb * End wall insulation: front and rear tankheads insulated with fiberglass-reinforced polyester (GRP) * Stainless steel insulation rings fitted along the tank * Number of manholes: 1 * 2" side air pipe in aluminum, right side; rear 2" TW coupling for air pipe included * 1 x pressure gauge included on the side air pipe * Equipped with 1.5" air line for higher bitumen unloading capacity and for cleaning hoses of product residues after unloading * 2" top vent pipe with stainless steel two-way slide valve * Aluminum walkway at tank dome area * Mechanically folding fall protection for walkway as per UVV * Access ladder on right side of tank * Filling dome located at tank front * 4 baffle plates inside the tank Itsdpfx Aljr I S H Ejnsn DISCHARGE SYSTEM: * Discharge line features DN100 bottom valve with hand wheel operation, compliant with EN 14433 for hazardous goods * Discharge line as per EN 14433: line starts with 4" bottom valve with hand wheel control, for safe unloading with a secondary safety valve (EN 14432-compliant 4" shut-off valve with mechanical control), ends with a 3" TW coupling with female thread and blank cap; between shut-off valve and TW coupling, a 1/2" sample drain valve is included * 1 x 6 m hose carrier in open-top aluminum box design RUNNING GEAR: * BPW axle with air suspension and disc brakes, each axle rated at 9 tons * BPW axles with 22.5" disc brakes * Automatic lift axle system on 1st axle * KNORR-ILVL ECAS electronic air suspension * 385/65 R 22.5" tires, sixfold * Alloy wheels * 1 x work light on the tank * Jost landing gears * 1 x plastic toolbox, 400x480x600 mm OTHER: * ADR plate by Signum, stainless steel, with set of interchangeable numbers, foldable * Fixed hazard placard * Hazard sign No.: 3 * Hazard sign No.: 9 * Temperature placard * Environmental placard * 2 x fire extinguisher boxes (without extinguishers) COLOURS: * Chassis: RAL 3002 Carmine Red * Tank: RAL 9006 White Aluminium + Varnish For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 35.442 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 16.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.350 mm, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Kässbohrer Maxima extendable tele HD platform semi-trailer Ijdpfslz Hliex Alnotn Immediately available TECHNICAL INFORMATION: * Coupling height: 1,250 mm * External length: 13,535 mm * Gooseneck length: 4,285 mm * Platform length: 9,100 mm * Extension: Up to 7,450 mm platform extension * Extension locking position: 500 mm * Gooseneck height: 180 mm * Wheelbase: 8,130 mm * Axle spacing between 1st and 2nd axle: 1,360 mm * Axle spacing between 2nd and 3rd axle: 1,810 mm * Axle load: 9 tonnes technical load capacity * Axle load total: 27,000 kg * King pin capacity: 18,000 kg technical king pin capacity * Total width: 2,540 mm * GVW (at 80 km/h): 45,000 kg * GVW (at 60 km/h): 46,000 kg * Tare weight ±3%: approx. 9,558 kg * Swing door at rear: 2,450 mm RUNNING GEAR: * Number of axles: 3 pcs * BPW axles with air suspension and disc brakes * Both front axles are fixed, the rear axle is steering * Air suspension incl. 1 load gauge * Overload-sensitive manual axle lift on 1st axle * Wabco EBS 4S/3M braking system * ABS, electro-pneumatic dual-circuit braking system * 24V lighting system with 2 x 7-pin + 1 x 15-pin sockets * Tyres: 6 x 385/65 R 22.5 CHASSIS: * High-quality, high-strength S700 MC steel chassis, ISO 1726 compliant * 2 mm omega-profile reinforced 30 mm hardwood flooring * 2” king pin with bolted connection * Mechanical landing gear: front telescopic support legs with 50-ton static capacity LOAD SECURING: * Lashing rings * Stake pockets * Removable stanchions * Container locks suitable for 1x20 ft., 2x20 ft., 1x40 ft., and 1x45 ft. containers * Steel front wall, 1,500+500 mm high, with Code-XL certificate ACCESSORIES: * 1 stainless steel toolbox, 1,000 mm x 500 mm x 500 mm (W x D x H) * Standard access ladder * Side underrun protection, steel, according to regulation 89/297/EEC * Stanchion box: 6 pcs, mounted on front plate * 2x2 oversize panels with LED lighting * Rotating beacon PAINT: * Chassis colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Stanje: dober (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 10/2008, skupna dolžina: 11.510 mm, skupna širina: 2.550 mm, medosna razdalja: 7.500 mm, barva: drugo, Leto izdelave: 2008, Zadnja os 1: Dvižna os; Največja dovoljena masa osi: 9.000 kg Zadnja os 2: Največja dovoljena masa osi: 9.000 kg Lastna teža: 6.200 kg Nosilnost: 26.800 kg Skupna dovoljena masa: 33.000 kg Tehnično stanje: dobro Optično stanje: dobro Poškodbe: manjša poškodba Iedpfx Asyzipkslnstn Registrska številka: OK-16-FX

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Available Immediately! TECHNICAL DATA: * Saddle height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10-ton capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible gross weight (60 km/h): 52,800 kg * Permissible gross weight (80 km/h): 48,000 kg CHASSIS: * 2x fixed axles at front, 1x trailing steering axle at rear * Manually adjustable axle lift system on the 1st axle, dependent on load * 12-fold tyres 245/70R17.5 * Air suspension, 1x load gauge FRAME: Manufactured from high-quality, high-tensile S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at front * Foldable supports at rear Itodpfx Alot Aqv Ssnsn * Grating floor RAMPS: * Ramp loading capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations, galvanized steel surface, 4,200 mm length and 850 mm width, 9° ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp: 2,800 mm long, 10° angle LOAD SECURING: * Lash rings 6x2 on the gooseneck with 6-ton capacity each, 6x2 on the platform with 6-ton capacity each, 8x2 on the outer frame with 6-ton capacity each * 8x2 stake pockets OTHER FEATURES: * 1x rotating beacon * 1x work light * 2x2 oversize marker boards with lighting * SmartBoard For further information, please feel free to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 27.650 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2021, prostornina tovornega prostora: 32 m³, Leto izdelave: 2021, Oprema: ABS, Stock no. 4912 Insulation slightly damaged, tank in good condition! 32,000 L Kässbohrer V2A Bitumen Tank Semi-Trailer / Insulated / Accident Damage / 1st Owner ---- * Manufacturer: Kässbohrer * Type: STS 32/1 - 10/24 * First registration: 04/2021 * Capacity: 32,000 liters in 1 compartment * Gross weight: 34,000 kg * Unladen weight (as per vehicle documents): 6,350 kg * Payload: 27,650 kg * Axles: 3 x BPW, 1st axle liftable / disc brakes * Suspension: Air suspension with raise/lower function * Tires: 385/65 R 22.5 approx. 50%, mounted on alloy wheels * Color: Chassis Carmine Red, Tank body White Aluminum Itedpsyawklsfx Alnsn * EBS Wabco * TÜV: valid until 03/2026 * Tank inspection: due 04/2027 * Leak test: valid until 04/2030 * ADR certificate valid until 01.04.2026 * Tank code: L4BH * ADR code: FL / AT * Pressure tank: 2 bar * Operating temperature: +250°C * 1 manhole cover at the front * Access ladder front right with walkway left and right * 4 baffle walls * 1 x thermometer rear right * DN 100 bottom valve at rear, manual operation right side * DN 100 shut-off valve, handwheel operation, rear right * Discharge line rear 3" * 1/2" sampling tap rear * Fire extinguisher box right and left rear (without extinguisher) * Grounding * Open hose storage right side * LED reversing lights * LED work lights * Toolbox rear left * Full-load landing gear * Single mudguards * Wabco AirSuspension Control Box * 1st hand / single owner German semi-trailer!! German documents!! 1st hand!! Insulation slightly damaged, tank in good condition! Notice regarding possible errors in the listing: Despite careful preparation, occasional errors may occur in the text or specifications. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or address further questions.

Stanje: novo, največja dovoljena obremenitev: 29.260 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer SLAR3 Extendable Lowloader with Wheel Wells Technical Specifications: Model and Manufacturer: * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable low-bed trailer with wheel recesses, suitable for transporting vehicles and heavy machinery. Dimensions: * Total length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm through side extensions) * Saddle height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capabilities: * Permissible total weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Dead weight: 12,744 kg ±3% * Axle capacity: 30,000 kg (10 tonnes per axle) * King pin capacity: 18,000 kg Axle Equipment: * Number of axles: 3 (2 fixed front axles, 1 rear steering axle) * Lifting axle: Manually load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Rims: * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre markings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre lifespan * Number of rims: 12 pieces (steel rims, offset ET120) Chassis and Suspension: * Suspension: Air suspension with load gauge * Braking system: Dual-line compressed air brake system by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics: * Lighting system: 24V, multi-chamber lights by ASPÖCK, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connections * Connectors: NATO socket with 2 x 50mm² intermediate cables (3 m length) Ramps: * Ramp type: Foldable hydraulic loading ramps with sliding mechanism * Capacity: 40 tonnes * Ramp surface: Hardwood * Safety: Ramp protection chain included Load Securing: * Lashing rings: - 2 x 2 with 5,000 daN capacity each - 1 x 2 with 10,000 daN capacity on the gooseneck Iodpfx Alex Epaqsnotn - 4 x 2 lashing rings with 6,000 daN capacity in the well area * Container locks: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features: * Gooseneck: With 90° vertical corners, stable and durable * Floor: 45 mm thick hardwood and steel floor with anti-slip (droplet) structure * Wheel well bridge: Segmental hardwood bridges with sheet metal supports for closing the wheel wells * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours: * Chassis: Traffic red (RAL 3020) / also available in black * Partial metallization of the contact surfaces Condition: New and immediately operational. * Perfectly suited for heavy transport and use in construction or machinery relocation.

Stanje: rabljeno, lastna masa: 18.500 kg, največja dovoljena obremenitev: 59.200 kg, skupna masa: 77.700 kg, konfiguracija osi: > 3 osi, prva registracija: 10/1978, dolžina tovornega prostora: 9.650 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 1.100 mm, vzmetenje: jeklo, velikost pnevmatike: 8,25 R 15 PR 18, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: v prihodu / v tranzitu, 6 osi, Kässbohrer osi, listnato vzmetenje, prisilno krmiljenje, pritrdilna ušesa, dvo-delne nakladalne rampe, sprednja opora, dvojne pnevmatike Nadgradnja: širina ramp 600 mm, 1950 mm med rampama, 6 osi (3., 4., 5. in 6. hidravlično prisilno krmiljene), višina sedla 1550 mm obremenjena, kraljevski zatič 3 ½", 6 x 10,55 t osi, skupna dolžina 14.200 mm. Itodpexwa Uyefx Alnjn Vse informacije brez jamstva, saj je vozilo v prihodu! PODATKI O DODATNI OPREMI BREZ JAMSTVA, pridržane so spremembe, vmesna prodaja in napake!

Stanje: rabljeno, prevoženi kilometri: 300 km, moč: 231 kW (314,07 KM), prva registracija: 04/2026, vrsta goriva: dizel, skupna masa: 30.000 kg, vrsta prenosa: samodejen, skupna dolžina: 8.228 mm, skupna širina: 3.077 mm, skupna višina: 3.375 mm, Leto izdelave: 2026, Oprema: klimatska naprava, žerjav, TEHNIČNI OPIS STROJA KÄSSBOHRER POWERBULLY 18T S PALFINGER PK 23002 SH E POWER LINK PLUS Opomba: Vozilo je iz proizvodnje letnik 2019/2020. Prva registracija/pregled v letu 2026. SPLOŠNI OPIS • Visoko terensko goseničarsko vozilo za profesionalno uporabo v zahtevnem terenu • Vozilo zgrajeno na podvozju Kässbohrer PowerBully 18T • Opremljeno s hidravlično nakladalno dvigalko PALFINGER PK 23002 SH E Power Link Plus • Primerno za montažna, dvigalna in transportna dela v težko dostopnem terenu • Uporabno na barjih, gozdnih poteh, električnih trasah, gorskih območjih in zavarovanih naravnih površinah PODVOZJE • Znamka: Kässbohrer • Tip: PowerBully 18T • Goseničarsko vozilo s hidrostatikom • Motor Cummins B6.7 turbo dizel • Moč motorja 231 kW (310 KM) • Emisijski standard EU Stage V • Največja hitrost cca. 13 km/h • Največja dovoljena masa 30.000 kg • Nizek tlak na podlago zaradi širokih gosenic iz gume • Sukanje okoli svoje osi omogočeno TERENSKE LASTNOSTI • Sposobnost vzpenjanja do 60 % • Prečna stabilnost do 40 % • Globina brodenja do 1.400 mm • Visok oprijem na mehkih ali neutrjenih tleh • Neškodljiva uporaba na občutljivih površinah • Idealno za delo zunaj asfaltiranih cest VOZNIŠKA KABINA • Varna kabina s certifikatom ROPS/FOPS • Klimatska naprava • Zračno vzmeten udobni sedež • Elektronsko vodenje vozila • Terminal z zaslonom na dotik • Kamera za vzvratno vožnjo • LED delovne luči • GPS telemetrija in upravljanje flote DVIGALO Znamka / Tip • PALFINGER PK 23002 SH E Power Link Plus • Hidravlična pregibna nakladalna dvigalka • Neskončno obračanje • Hidravlični šestkratni izteg Tehnični podatki • Dvigalni moment: 21,5 mt (215 kNm) Itjdpfxjzydk Ro Alnsn • Največja dvižna moč: pribl. 6.200 kg • Največji hidravlični doseg: pribl. 17,10 m • Nosilnost pri največjem iztegu: pribl. 890 kg • Natančno pozicioniranje bremen preko občutljive hidravlične kontrole Oprema dvigala • PALCOM radijsko daljinsko upravljanje • PALTRONIC zaščita pred preobremenitvijo • HPSC nadzor stabilnosti • Aktivno dušenje nihanja • Hidravlični vitel • Štiritočkovna stabilizacija • Dodatni hidravlični priključki za priključke • LED delovna osvetlitev na dvigalu PODROČJA UPORABE • Gradnja prostozračnih električnih vodov in stebrov • Vzdrževanje vetrnih elektrarn • Gradnja cevovodov in kanalizacije • Gradnja telekomunikacijskih in radijskih stolpov • Posebna gozdarska dela • Dela na barjih in zaščitenih območjih • Civilna zaščita in reševanje • Montažna in dvigalna dela v težko dostopnem terenu POSEBNE PREDNOSTI • Kombinacija transportnega vozila in zmogljivega nakladalnega dvigala • Izredno nizek tlak na tla za občutljive površine • Visoka nosilnost ob odličnih terenskih zmogljivostih • Varno delo tudi v najtežjih pogojih • Gospodarna alternativa mobilnim dvigalom v zahtevnih terenih • Visoka prilagodljivost za energetska podjetja, upravljavce omrežij in specializirane gradbene izvajalce POVZETEK Kässbohrer PowerBully 18T s priključenim PALFINGER PK 23002 SH E Power Link Plus združuje največjo terensko zmogljivost in vrhunsko dvigalno tehnologijo. Z izredno nizkim tlakom na tla, visoko nosilnostjo in dosegom preko 17 metrov je stroj idealen za dvigalna, montažna in transportna dela na območjih, ki so z običajnimi tovornjaki z dvigali ali gradbenimi stroji nedosegljiva.

Stanje: novo, največja dovoljena obremenitev: 35.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Kässbohrer Tank Container Chassis NEW | 20 ft | also available as 30 ft version | from €23,500 New vehicle – individually configurable for your application. High-quality tank container chassis ensuring safe transport of 20-ft tank containers. Also available as a 30-ft version – customized configuration based on customer requirements. ----Highlights * Suitable for 1 × 20 ft tank container * Also available as 30-ft tank container chassis * Very low tare weight (approx. 3,200 kg) * Robust, durable chassis with 10-year corrosion protection * Proven Kässbohrer quality for hazardous goods and tank logistics ----Technical Specifications * Gross vehicle weight: 39,000 kg * Axle load: 27,000 kg * King pin load: 12,000 kg * Fifth wheel height: 1,150 mm * Overall length: 8,160 mm * Overall width: 2,550 mm * Unladen weight: approx. 3,200 kg * Axle spacing: * 1st–2nd axle: 1,310 mm * 2nd–3rd axle: 1,410 mm ----Standard Equipment * High-strength steel construction made from S700 MC * KTL-coated chassis with 10 years corrosion protection * Container locks (JOST) for: * 1 × 20 ft tank container * Swap tanks (7,150 / 7,450 / 7,820 mm) * BPW axles, air suspension, disc brakes (3 × 9 t) * WABCO EBS brake system (2S/2M) incl. ABS & RSS * LED lighting system according to UN ECE R48 * Side underrun protection according to ECE R73 * Fixed underrun protection according to ECE R58.3 * Mechanical JOST landing gear (24 t) ----Included Options / Equipment * TPMS tire pressure monitoring system (WABCO OptiTire) * Aluminium rims (Kässbohrer selection) * ADR preparation (ADR compliant, T9 document provided by customer) * Hose carrier with stainless steel cover * Side and rear markings according to EU regulations * Fire extinguisher box * Axle load indicator manometer * Mudguards & spray protection according to EU standards Ijdpfoypa Nvex Alnotn ----Suitable for Tank Container Transport * Chemical & hazardous goods logistics * Liquid goods in ISO tank containers * National & international transports * Forwarders operating 20-ft and 30-ft tank containers ----Additional equipment and individual customization available at any time – we will configure your vehicle precisely according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 35.240 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, skupna dolžina: 13.200 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLH S HS 3 / 3H ? 18 / 30 – nizkotilni prikolica / 3-osna / hidravlično krmiljena Na voljo takoj, na voljo tudi z rešetkastim dnom. Proizvajalec: Kässbohrer * Tip: K.SLH S HS 3 / 3H ? 18 / 30 * 3-osna nizkotilna prikolica * Osnovne osi BPW * Zračna vzmet * Bobnaste zavore * 1., 2. in 3. os hidravlično krmiljene * Os dvižna * Ročno upravljanje dvižne osi * WABCO EBS 2S/2M z ABS in RSS * Pnevmatike: 245/70 R17.5 * Pnevmatike M+S / 3PMSF * Sistem za nadzor tlaka v pnevmatikah * WABCO SmartBoard * Električna črpalka za krmiljenje Itsdpfez Ec Trsx Alnjn * Polavtomatsko prilagajanje širine z hidravlično krmiljenimi osmi Dimenzije / teže: Zunanja dolžina: 13.250 mm * Skupna širina: 2.550 mm * Višina sedla: 1.250 mm * Dolžina gosičnega vratu: 3.900 mm * Dolžina platforme: 9.300 mm * Višina platforme: 875 mm * Medosna razdalja: 8.800 mm * Osna razdalja: 1.360 mm * Prazna teža: približno 12.760 kg * Tehnična obremenitev osi: 30.000 kg * Obremenitev kraljevega zatiča: 18.000 kg * Tehnična skupna teža pri 80 km/h: 48.000 kg * Tehnična skupna teža pri 40 km/h: 51.000 kg Wiese Transporttechnick - zastopnik Šasi / nakladalna površina: Visoko trpežno jeklo S700 MC * 45 mm trdna lesena talna obloga * Jeklena talna obloga s kapljičasto strukturo nad kolesi * Stranske podaljške * Podaljšek do 300 mm * 2" kraljevi zatič * Mehanske zadnje podpore, nosilnost 45 t * Delno metalizirano šasi * Zadnji del 500 mm / 10° nagnjen Wiese Transporttechnick - zastopnik Rampe: Hidravlične, zložljive rampe * Nosilnost rampe: 40 t * Dolžina rampe: 2.750 mm * Širina rampe: 850 mm * Hidravlično pomično * Trdna lesena obloga * Hidravlične rampe za gosični vrat * Varovanje rampe s pomočjo verižnih zateznih naprav Wiese Transporttechnick - zastopnik Varovanje tovorja / oprema: Pritrdilne točke: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 žepov za pritrdilne pasove 80 × 80 mm * 4 žepi za pritrditev kontejnerjev za 1 × 20 ft * Orodjarna na gosičnem vratu, približno 2.540 × 600 × 460 mm * Centralni sistem mazanja * LED-luč za opozarjanje vseh strani * 2 delovna žarometa na zadnji strani * Izvlečna opozorilna tabla z LED-pozicijskimi lučmi * Predal za podaljške * Barva šasije: RAL 3020 prometna rdeča Drugo: LED-osvetlitev * Aspöck EUROPOINT 3 LED * Nosilec za rezervno kolo * 12 platišč/pnevmatik * Plošče za podaljšanje * Obsežna oprema za težke tovornjake/gradbeni stroji Pridržane pravice do napak, sprememb in prodaje.

Stanje: rabljeno, lastna masa: 16.200 kg, največja dovoljena obremenitev: 48.050 kg, skupna masa: 64.250 kg, konfiguracija osi: > 3 osi, prva registracija: 08/1976, dolžina tovornega prostora: 7.800 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 1.380 mm, vzmetenje: jeklo, velikost pnevmatike: 445/65R22.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, osi Kässbohrer, listnato vzmetenje, prisilno krmiljenje, pritrjevalne zanke, dvo-delne nakladalne rampe, sprednja podpora. Itedpfx Aoxyzyielnjn Nadgradnja: širina ramp 750 mm, višina priklopa 1550 mm, kraljevski zatič 3 ½", 4 x 13 t osi, 4 osi hidravlično prisilno krmiljene, skupna dolžina 13.100 mm. PODATKI O DODATNI OPREMI BREZ GARANCIJE, pridržane spremembe, vmesna prodaja in napake!

Stanje: novo, največja dovoljena obremenitev: 37.700 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Kässbohrer Container Chassis NEW | Extendable | 20–45 ft | 3 Axles | from €29,800 New vehicle – individually configurable for your application. Flexible container chassis for professional transport of 20 ft to 45 ft containers. --- Key Features --- Iedpfx Alsypa N Nsnjtn • Extendable chassis at front/middle/rear • Suitable for 20, 30, 40 & 45 ft containers • Also suitable for tank containers and high-cube containers • High operational flexibility for freight forwarding and intermodal transport • Lightweight design with robust construction • Container locks are stable and designed for real-world use • Maintenance-friendly structure for daily operations --- Chassis & Safety --- • 3-axle design • Branded axles (BPW / SAF – depending on configuration) • Air suspension with lifting and lowering function • WABCO EBS braking system • TPMS tire pressure monitoring system • LED lighting according to EU regulations Further equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Actual equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Available Immediately! TECHNICAL DATA: * Saddle height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10-ton load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible gross weight (60 km/h): 52,800 kg * Permissible gross weight (80 km/h): 48,000 kg CHASSIS: * 2x fixed front axles, 1x trailing steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load pressure gauge FRAME: Made from high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front Ijdow Ii A Aepfx Alnjtn * Foldable supports at the rear * Grated floor RAMP: * Ramp capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation with galvanized steel surface, 4,200 mm length and 850 mm width, 9° ramp angle, load capacity 40,000 kg and 3,510 mm height when closed * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck with 6-ton capacity, 6x2 on platform with 6-ton capacity, 8x2 on the outer frame with 6-ton capacity * 8x2 stake pockets OTHER FEATURES: * 1x rotating beacon * 1x work light * 2x2 oversize signs with lighting * SmartBoard For further information, we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Lowbed Trailer with Hydraulic Gooseneck Available Immediately! TECHNICAL SPECIFICATIONS: * Fifth wheel height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg Itsdpsw Nlzqsfx Alnjn * BPW axles with air suspension and drum brakes, 10 t load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x rigid front axles, 1x trailing steering axle at rear * Load-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Folding support legs at the rear * Grating floor RAMP: * Loading ramp capacity: 40 t * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation, galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, 40,000 kg capacity and 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck (6 t capacity), 6x2 on platform (6 t capacity), 8x2 on the outer frame (6 t capacity) * 8x2 stake pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 wide load signs with lighting * SmartBoard Feel free to contact us for further information.

Stanje: novo, največja dovoljena obremenitev: 29.260 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Technical Data: Model and Manufacturer - Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 - Manufacturer: Kässbohrer - Type: Extendable low-bed semi-trailer with excavator recesses, suitable for transporting vehicles and heavy machinery. Dimensions - Overall length: 13,190 mm - Gooseneck length: 3,950 mm - Platform length: 9,240 mm - Extension: 3,500 mm (pe) - Total width: 2,550 mm (expandable by 600 mm with side extensions) - Fifth wheel height: 1,250 mm - Platform height: 875 mm - Ramp length: 2,750 mm - Ramp width: 850 mm - Wheelbase: 7,800 mm - Axle distance: 2,260 mm Weights and Load Capacities - Permissible gross weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h - Tare weight: 12,744 kg ±3% - Axle load capacity: 30,000 kg (10 tonnes per axle) - King pin load capacity: 18,000 kg Axle Equipment - Number of axles: 3 (2 rigid at front, 1 trailing axle at the rear) - Lift axle: Manually raiseable depending on load (1st axle) - Axle material: BPW axles with drum brakes Tyres and Rims - Tyre size: 245/70 R17.5 - Tyre brand: GOODYEAR - Tyre markings: M+S label and 3PMSF marking - Tyre pressure monitoring system: Increases fuel efficiency and tyre life - Number of rims: 12 units (steel rims with offset ET120) Chassis and Suspension - Suspension: Air suspension with load gauge - Braking system: Dual-circuit air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics - Lighting system: 24V, multi-chamber lights from ASPÖCK, LED side marker and rear lights - Coupling type: Standard yellow/red for air supply connection - Electrical connectors: NATO socket with 2 x 50mm² interconnection cables (3 m long) Ramps - Type: Foldable hydraulic loading ramps with sliding mechanism - Capacity: 40 tonnes - Ramp surface: Hardwood Isdpfx Aju Tarpslnetn - Safety: Ramp protection tension chain included Load Securing - Lashing rings: - 2 x 2 lashing rings, each 5,000 daN capacity - 1 x 2 lashing rings, 10,000 daN capacity on gooseneck - 4 x 2 lashing rings, 6,000 daN capacity in the low bed area - Container lock housing: Suitable for transportation of 1 x 20 FT or 1 x 30 FT containers - Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features - Gooseneck: With 90° vertical corners, stable and durable - Floor: 45 mm thick hardwood floor and steel floor with chequer plate structure - Excavator recess bridge: Bridge consists of hardwood planks with steel supports to cover wheel recesses - Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Paintwork - Chassis: Traffic red (RAL 3020) - Partial metallization of the loading areas Condition: New and ready for immediate use. - Perfectly suited for heavy hauling and use in construction or machinery relocation.

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Lowbed Trailer with Hydraulic Gooseneck Available Immediately! TECHNICAL SPECIFICATIONS: * Fifth wheel height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 t load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x rigid front axles, 1x trailing steering axle at rear * Load-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Folding support legs at the rear * Grating floor RAMP: * Loading ramp capacity: 40 t * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation, galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, 40,000 kg capacity and 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck (6 t capacity), 6x2 on platform (6 t capacity), 8x2 on the outer frame (6 t capacity) * 8x2 stake pockets Iodpfx Aowmh H Eolnotn MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 wide load signs with lighting * SmartBoard Feel free to contact us for further information.