Unsinn Udk 3017-35-14 Bwa Dreiseitenkipper nakup rabljenega (12.025)

Stanje: novo, Three-way tipper with electric pump & cordless screwdriver pump and side wall extension Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: approx. 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload approx.: 2595 kg (payload may vary depending on equipment and configuration) With the innovative hinge system of the KombiLine, the extensions can be conveniently folded down in just a few quick steps, making loading and unloading the trailer especially ergonomic, easy, and time-saving. Electrohydraulic pump with backup manual pump for easy tipping using a cordless screwdriver in case of low battery. Integrated battery charger with 230 V plug. Battery and pump unit are securely stored in the battery box, protected from dirt. Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the loading platform (for easy retrofitting of loading ramps). Maintenance support strut for securing the tilted platform during maintenance work. Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics and high stability. Closed, fully welded and hot-dip galvanised steel frame profile. Continuous solid steel floor across the entire vehicle width. Reinforced automatic jockey wheel. Maneuvering handle with practical ratchet strap reel for easy handling. Load securing system for increased flexibility and efficiency in load securing, DEKRA certified. 10 recessed lashing pins fitted in the steel floor. Lashing pins above and below the loading platform, each with a load capacity of up to 1500 kg and 360° rotatable. Side walls completely foldable and removable. Tailgate with foldable steel plank including anti-slip protection for loading ramps. Robust cam lever locks on the side walls. Hjdpfey H D Irex Anmsl 4 removable steel corner stanchions. Lighting with 13-pin connector and reversing light. Incl. vehicle documents. Available options and accessories for this trailer: Aluminium loading ramps Load securing net Supports Anti-theft device Registration of your new trailer with the vehicle licensing authority

Stanje: novo, Three-way tipper with petrol-hydraulic unit Manufacturer: Unsinn Hedpfxsy Dbiue Anmol Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Gross vehicle weight: 3,500 kg Unladen weight: approx. 905 kg Payload: approx. 2,595 kg (Payload figures may vary depending on equipment and configuration) Petrol-hydraulic unit with protective cover mounted in the V-drawbar Integrated ramp compartment with tensioning device and foldable number plate holder for stowing loading ramps under the loading floor (for easy retrofitting of loading ramps) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Heavy-duty steel floor running the entire width of the trailer Maintenance support for securing the tipped platform Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap reel for easy handling Load securing system for increased flexibility and efficiency, DEKRA certified 10 recessed tie-down points mounted in the steel floor Tie-down points on and under the load floor, each rated for up to 1,500 kg and 360° rotatable Side panels fully foldable and removable Rear panel with steel cladding, foldable with anti-slip protection for loading ramps Robust toggle latches on all side panels 4 slot-in steel corner posts Lighting with 13-pin plug and reverse light Including vehicle documents Possible options and accessories for this trailer: Whether mesh extension, steel extension, or side panel extension – choose the right variant and customize your setup. Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, a mesh extension at the front and rear can be combined perfectly with a steel or side panel extension on the sides – without additional effort. Loading ramps Support legs Load securing net Anti-theft device Registration of your new trailer at the vehicle registration office

Stanje: novo, Three-way tipper with E-pump & cordless screwdriver pump, loading ramps and support stands Manufacturer: Unsinn Type: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload: approx. 2595 kg (Payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency pump function 'Pumpless', allowing tipping via cordless screwdriver in case of low battery Integrated battery charger with 230 V plug Battery and pump unit are securely stored and protected from dirt in the battery compartment Aluminium loading ramps, 2560 x 300 mm, load capacity 2800 kg per pair Integrated ramp compartment with tensioning device and foldable license plate holder for storing the ramps under the loading platform Robust drop-down support legs Unique, torsion-resistant longitudinal chassis frame for improved driving stability and safety Closed, fully welded and hot-dip galvanized steel frame profile Solid steel floor running the full width of the vehicle Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical strap reel for easy handling Hodpfx Anoy Axkyjmjl Cargo securing system for increased flexibility and efficiency, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing points on and under the loading floor, each rated up to 1500 kg and rotatable 360° Sidewalls fully foldable and removable Rear sidewall, steel-plated, foldable with anti-slip lock for loading ramps Robust cam lever locks on the sidewalls 4 removable steel corner posts Lighting system with 13-pin connector and reverse light Including vehicle documents Optional features and accessories for this trailer: - Sidewall extension - Mesh extension - Load securing net - Anti-theft device - Registration of your new trailer with the vehicle registration authority

Stanje: novo, Three-way tipper with steel side wall extension Manufacturer: Unsinn Model: UDK-B 3617-35-14 Platform dimensions: 3660 x 1750 x 1100 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: 985 kg Payload: 2515 kg (payload may vary depending on equipment and configuration) Tyres: 185 R14 C Steel side wall extension: 750 mm Automatic jockey wheel One-piece pressed steel floor across the full width Patented load securing system with 14 lashing points on and under the platform Each lashing point load capacity: 1500 daN (kg), 360° rotatable Side walls foldable and completely removable Tailgate with steel panelling, foldable, including anti-slip protection for ramps 4 detachable steel corner stanchions Electric pump Manual emergency pump (Pumpless System) Hydraulic connection for towing vehicle (additional) 2 rear work lights Lighting system with 13-pin plug Reversing light Including vehicle documents Available options and accessories for this trailer: Hjdpfsy H Nm Tox Anmsl - 100 km/h certificate - Spare wheel incl. bracket - Drop-down support legs - Anti-theft device - Drawbar cover - Registration of your new trailer at the local vehicle registration office

Stanje: novo, Three-way tipper with electric pump Manufacturer: Unsinn Model: UDK 3017-30-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3,000 kg Unladen weight: approx. 835 kg Payload approx.: 2,165 kg (Payload specification may vary depending on equipment and configuration) Electrohydraulic pump with emergency hand pump, allows tipping via cordless screwdriver when battery is low Integrated battery charger with 230 V plug Battery and pump unit safely and dust-protected stowed in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps underneath the platform (for easy retrofit of ramps) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Heavy-duty steel floor plate across the full vehicle width Hodpfx Ajy H Nbdjnmel Maintenance support bar for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap reel for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 10 recessed lashing points mounted in the steel floor Lashing points above and below the platform, loadable up to 1,500 kg each and 360° rotatable Drop sides fully foldable and removable Rear drop side foldable, steel-plated, including run-off protection for loading ramps Robust toggle latches on the side panels 4 plug-in steel corner stanchions Lighting with 13-pin plug and reverse light Including vehicle documents Possible options and accessories for this trailer: Mesh extension, steel extension, or side wall extension—choose your preferred version and customize your build Thanks to the clever KOMBILINE system, the extensions can easily be combined. For example, mesh extensions on the front and rear can be perfectly combined with steel or side wall extensions on the sides—no extra effort required Loading ramps Support stands Load securing net Anti-theft device Registration of your new trailer at the road traffic authority

Stanje: novo, Three-way tipper with electric pump Manufacturer: Unsinn Model: UDK 3617-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload approx.: 2595 kg (payload may vary depending on equipment and configuration) Electro-hydraulic pump with emergency manual pump – enables tipping with a cordless screwdriver in case of low battery Integrated battery charger with 230 V plug Battery and pump unit safely and dirt-protected stored in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the platform (for easy retrofitting of ramps) Hodoy H Na Topfx Anmjl Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Massive steel floor running over the entire width of the trailer Maintenance support for securing the tilted body Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap dispenser for easy handling Load securing system for more flexibility and efficiency in load securing, DEKRA certified 14 recessed lashing rings mounted in the steel floor Lashing rings on and under the platform, each loadable up to 1500 kg and rotatable 360° Sidewalls can be fully folded down and removed Tailgate with fold-down steel covering including anti-slip protection for loading ramps Robust lever locks on the sidewalls 4 plug-in corner stanchions made of steel Lighting with 13-pin plug and reversing light Including vehicle documents Available options and accessories for this trailer: Whether mesh attachment, steel extension or sideboard extension – choose the suitable variant and customize your superstructure individually. Thanks to the ingenious KOMBILINE system, extensions can be combined easily with each other. For example, a mesh attachment at the front and rear can be perfectly combined with a steel or sideboard attachment at the sides without additional effort. Loading ramps Support legs Load securing net Anti-theft device Registration of your new trailer at the local vehicle registration office

Stanje: novo, Three-way tipper with electric pump, cordless drill pump & mesh extension Manufacturer: Unsinn Model: UDK 3617-35-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: 770 mm Gross vehicle weight: 3,500 kg Unladen weight: approx. 985 kg Payload approx.: 2,515 kg (payload specifications may vary depending on equipment and design) Mesh extension with integrated pendulum mounting in the corner stanchions, foldable on all four sides With the innovative hinge solution of the KombiLine, the superstructures can be folded down easily in just a few steps. This makes loading and unloading the trailer especially ergonomic, straightforward and time-saving. Electrohydraulic pump with emergency pump function "Pumpless" for easy tipping using a cordless screwdriver in case of low battery power Integrated battery charger with 230 V plug Battery and pump unit securely and dirt-protected stored in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the platform (ramps can be easily retrofitted) Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics and high stability Fully welded and hot-dip galvanized steel frame profile Massive steel bed running the full width of the vehicle Maintenance support to secure the raised platform Reinforced automatic support wheel Shunting handle with practical strap winder for easy handling Load securing system for more flexibility and efficiency, DEKRA certified 14 recessed lashing points in the steel bed Lashing points above and below the platform, loadable up to 1,500 kg each and 360° rotatable Side panels fully foldable and removable Rear panel with fold-down steel plating, including anti-slip protection for loading ramps Robust cam lock fasteners on the side panels 4 plug-in steel corner stanchions Lighting with 13-pin connector and reversing light Including registration documents Hedpsy E Tb Ssfx Anmol Available options and accessories for this trailer: Side wall extension Loading ramps Support legs Load securing net Anti-theft protection Registration of your new trailer at the vehicle registration office

Stanje: novo, Three-way tipper with electric pump & cordless drill pump Manufacturer: Unsinn Model: UDK 3620-35-14 Dimensions: 3660 x 2040 x 350 mm (LxWxH) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 1065 kg Payload: approx. 2435 kg (payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency manual pump function, allowing easy tipping with a cordless drill in case of weak battery Integrated battery charger with 230 V plug Battery and pump unit safely stowed and protected from dirt in the battery box Integrated ramp compartment with tensioning system and foldable license plate holder for storing loading ramps under the platform (for easy retrofitting of ramps) Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous massive steel floor across the entire vehicle width Maintenance support for securing the raised body Hodpfx Aney E Rg Sjmel Reinforced automatic jockey wheel Maneuvering handle with practical strap winder for ease of use Load securing system for greater flexibility and efficiency in load restraint, DEKRA certified 14 recessed lashing points mounted in the steel floor Lashing points on and below the loading platform, each rated up to 1500 kg and 360° rotatable Dropsides fully foldable and removable Tailgate with steel cladding, foldable, including slip guard for loading ramps Robust toggle latches on the sideboards 4 removable steel corner stanchions Lighting with 13-pin plug and reversing spotlight Including vehicle documents Available options and accessories for this trailer: Whether mesh extension, steel extension, or dropside extension—choose the variant that suits your needs and customize your structure accordingly. Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, a mesh extension on the front and rear can be perfectly combined with either a steel or standard dropside extension on the sides—no extra effort required. Loading ramps Cargo securing net Anti-theft device Registration of your new trailer with the local road traffic authority

Stanje: novo, Three-way tipper with electric pump & mesh sides Manufacturer: Unsinn Model: UDK 3017-30-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3000 kg Unladen weight: approx. 835 kg Payload: approx. 2165 kg (Payload specifications may vary depending on equipment and construction) Mesh attachment with integrated pendulum mounting in the corner stanchion, 4-sided, side-folding With the innovative hinge solution of the KombiLine, the attachments can be easily folded down in just a few steps. This makes loading and unloading the trailer particularly ergonomic, simple, and time-saving. Electrohydraulic pump with emergency function "Pumpless," enabling easy tipping with a cordless screwdriver when the battery is low Integrated battery charger with 230 V plug Battery and pump unit safely and dirt-protected stored in the battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the bed (to easily retrofit loading ramps) Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous solid steel floor across the entire vehicle width Maintenance support for securing the tilted bed Reinforced automatic jockey wheel Maneuvering handle with practical strap roller for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 10 recessed lashing points mounted in the steel floor Lashing points on and under the loading area, each loadable up to 1500 kg and rotatable 360° Side panels fully foldable and removable Hsdpfey Dbkxex Anmol Tailgate with steel cladding, foldable incl. slip protection for loading ramps Robust lever locks on the side panels 4 removable steel corner posts Lighting with 13-pin plug and reversing light Including vehicle documents Available options and accessories for this trailer: Side wall extension Loading ramps Support legs Load securing net Anti-theft device Registration of your new trailer with the road traffic authority

Stanje: novo, Three-way tipper trailer with electric pump & cordless screwdriver pump Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 4260 x 2040 x 350 mm (L x W x H) Loading height: 770 mm Gross vehicle weight: 3500 kg Unladen weight: approx. 1145 kg Payload approx.: 2355 kg (Payload may vary depending on specification and configuration) Electro-hydraulic pump with emergency manual 'Pumpless' function, enabling tipping via cordless screwdriver in case of low battery Integrated battery charger with 230 V plug Battery and pump unit securely stowed and protected from dirt in a battery box Integrated ramp storage compartment with fastening device and foldable license plate holder for storing loading ramps underneath the platform (easy retrofitting of loading ramps possible) Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics and high stability Hjdpoy Dbhksfx Anmsl Fully welded, hot-dip galvanized closed steel frame profile Full-width, heavy-duty steel floor Maintenance support strut to secure the tipped bridge Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap winder for easy handling Load securing system for more flexibility and efficiency when securing loads, DEKRA certified 18 recessed lashing pins mounted in the steel floor Lashing pins on and under the platform, each with up to 1500 kg load capacity, rotatable 360° Sideboards completely foldable and removable Rear board with fold-down steel covering including slide protection for loading ramps Robust overcenter catches on the sideboards 4 removable steel corner posts Lighting with 13-pin plug and reversing light Including vehicle documentation Available options and accessories for this trailer: Whether mesh extension, steel extension or additional sideboard—choose the appropriate variant and customize your configuration. Thanks to the clever KOMBILINE system, extensions can easily be combined together, e.g. a mesh extension at the front and rear, perfectly combined with a steel or sideboard extension on the sides—with no extra effort required. Loading ramps Load securing net Anti-theft device Registration of your new trailer at the local road traffic office

Stanje: novo, lastna masa: 790 kg, največja dovoljena obremenitev: 2.210 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.130 mm, delovna širina: 1.910 mm, Hydraulics, automatic reversing system, hot-dip galvanization, roof window, electric pump / full steel floor, * IMMEDIATELY AVAILABLE * incl. electric pump / full steel floor Technical Data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Permissible total weight: 3,000kg - Curb weight: 790 kg - Payload: 2,210 kg - Inner dimensions: 306 x 175 x 35 cm (L x W x H) - Total external dimensions: 450 x 191 x 113 cm (L x W x H) - Loading edge height: 78cm - Tyres: 185R14C steel rim - Brakes: yes - Jockey wheel: yes - 100km/h approval: optional at extra cost - incl. vehicle registration documents Body Construction: - Floor: heavy-duty full steel floor, reinforced - Side walls: anodized aluminium, double-walled, 4-way folding & removable - Side wall height: 35cm - Chassis: flatbed, ALKO rubber suspension axle - Tipping function: yes, three-way tipper - Hydraulics: electro-hydraulic pump - Tip angle: approx. 45° - Stages hydraulic cylinder: 3-stage - Overrun device & brake: ALKO - Frame/chassis: welded steel frame, hot-dip galvanized - Extension sides: optional at extra cost - Lashing rings: 6 pieces recessed in the floor - Supports: optional at extra cost - Ramps: optional at extra cost - Lighting connector: 13-pin - Registration: ZBII & COC documents Standard Equipment: - Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics - Hollow profile construction, welded and fully hot-dip galvanized in immersion bath - Preparation for loading ramp holder - Anodized aluminium side panels, double-walled - Side and rear walls foldable - Removable side panels - Full steel floor, extremely robust - Very stable welded steel frame - Frame fully hot-dip galvanized in immersion bath - Many sturdy cross-members for high point load capacity - Additional continuous longitudinal reinforcements welded in - Electro-hydraulic pump - Automatic reversing system - ALKO overrun device and parking brake - Sturdy tension locks - Very stable V-drawbar, reinforced - 13-pin plug - Reverse / backup lights - Large-dimensioned safety lighting - Integrated rear fog light - Rear frame lighting recessed - Reinforced, automatic jockey wheel for safe parking of loaded trailer, load capacity 500kg - Premium shunting handle with strap roller - Registration documents: ZBII and COC papers Retrofittable accessories – please inquire: - 100km/h approval with shock absorbers - Side extension panel - Mesh extension 60cm - Closed steel extension 60cm - Spare wheel - Tool box - Rear supports - Ramps - Flat tarpaulin - Net hooks - Reverse / backup lights - Lashing straps - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing options! Descriptions and images are copyright protected!! Over 800 trailers immediately available at our premises! We have been a Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix specialist dealer & service workshop for over 30 years – delivery throughout Germany available for an extra charge! Trailer Center BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, mistakes, and prior sale excepted - Hodpfx Anou N Nhujmol

Stanje: novo, Firewood Trailer Hsdpfxey E Rd Rj Anmol Manufacturer: Unsinn Model: UDK-B 3617-35-14 Loading Area Dimensions: 3660 x 1750 x 1200 mm (L.W.H.) Gross Vehicle Weight Rating: 3500 kg Unladen Weight: 1245 kg Payload: 2255 kg (payload specifications can vary depending on equipment and construction) Tyres: 185 R14 C Automatic jockey wheel Shock absorbers as a prerequisite for 100 km/h approval Steel floor across the entire width made from a single, bent piece Patented load securing system with 14 lashing pins on and under the loading area Each pin rated at 1500 daN (kg), 360° rotatable Side panels fixed on three sides Rear drop gate Removable aluminium partition for flexible compartmentalisation at various positions Sturdy folding rear support legs ensure stable positioning even when detached Electric pump Manual emergency pump, pumpless system Additional hydraulic connection for towing vehicle 2 rear work lights Lighting system with 13-pin plug Reversing lights 2 plastic toolboxes, splash-water protected, mounted left and right under the loading area Flat tarp for protection of dried firewood in bad weather, including storage compartment on the front board Vehicle documents included Available options and accessories for this trailer: 100 km/h approval certificate Spare wheel including holder Anti-theft device Drawbar cover Registration of your new trailer with the local road traffic office

Stanje: novo, lastna masa: 1.140 kg, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.260 mm, širina tovornega prostora: 2.040 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: srebrn, gradbena višina: 1.200 mm, delovna širina: 2.210 mm, Hydraulics, automatic reversing, hot-dip galvanization, roof window, electric pump / solid steel floor, *IMMEDIATELY AVAILABLE* incl. electric pump / solid steel floor Technical specifications: - Type: new vehicle - TÜV: new / 2 years - Availability: IMMEDIATE! - Permissible total weight: 3,500 kg - Unladen weight: 1,140 kg - Payload: 2,360 kg - Internal dimensions: 426 x 204 x 35 cm (L x W x H) - Overall external dimensions: 575 x 221 x 120 cm (L x W x H) - Loading edge height: 78 cm - Tires: 185R14C steel rims - Brake: yes - Jockey wheel: yes - 100 km/h: optional at extra charge - incl. vehicle documents Body configuration: - Floor: solid steel floor, reinforced - Side panels: anodized double-walled aluminum, 4x foldable & removable - Side panel height: 35 cm - Chassis: flatbed trailer, ALKO rubber spring axle - Tipping feature: yes, three-way - Hydraulics: electro-hydraulic pump - Tipping angle: approx. 45° - Hydraulic cylinder stages: 4 stages - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Side extension: optional for extra charge - Lashing eyes: 18 pieces, each 1,500 kg - Support legs: optional for extra charge - Ramps: optional for extra charge - Lighting connector: 13-pin - Registration: ZBII & COC documents Standard equipment: - Unique, torsion-resistant longitudinal frame for safe driving characteristics - Hollow section construction, welded and completely hot-dip galvanized by immersion - Ramp storage with clamping device under the loading platform, including foldable license plate holder with maintenance support - Anodized, double-walled aluminum side panels - Side panels foldable on all 4 sides - Side panels removable - Rear side panel pendulum mounted - Solid steel floor - extremely robust - Very stable, welded steel frame - Frame completely hot-dip galvanized by immersion - Many stable cross members for high point loads - Additional continuous welded longitudinal reinforcements - Spinlock® cargo securing system - 18 recessed lashing pins in the steel floor, each with a lashing force up to 1,500 kg - When recessed, the lashing pins can be used with a strap loop as a lashing point under the loading platform - Electro-hydraulic pump - Including integrated charger - Emergency pump (Pumpless) incl. socket wrench adapter - Automatic reversing - ALKO overrun device and parking brake - Robust tension locks - Very stable, reinforced V-drawbar - 13-pin connector - Reversing light - Large dimension safety lighting - Integrated rear fog light - Lighting recessed into rear frame - Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg - Premium maneuvering handle with strap reel - Registration papers: ZBII and COC documents Optional retrofittable accessories - please inquire: - 100 km/h approval with shock absorbers - Side panel extension - Mesh extension 60 cm - Closed sheet metal extension 60 cm - Spare wheel - Tool box - Rear supports - Ramps - Flat tarp - Net hooks - Reversing lights - Lashing straps - and more New vehicle with warranty and TÜV. We are happy to offer you suitable financing! Descriptions and images are protected by copyright!! Over 800 trailers immediately available for you! For over 30 years we have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Authorized Dealer & Repair Workshop - Delivery possible across Germany for an additional fee! Trai Hsdpfsu Hr Ryjx Anmjl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 208663, lastna masa: 1.190 kg, največja dovoljena obremenitev: 2.310 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.660 mm, širina tovornega prostora: 2.040 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 185R14C, barva: srebrn, Leto izdelave: 2024, Oprema: dvižna zadnja plošča, SPECIAL PRICE until 05.06.2025!!! Mesh extension 650 mm with integrated pendulum mount in the corner stanchions, 4-sided, internal length x internal width 3660x2040 mm, type UH, UDK Loading ramps made of aluminium, 2560x300 mm, load capacity 2,800 kg/pair, plus one pair of sturdy, swiveling parking supports for 13/14 inch wheels UNSINN plastic toolbox, splash-proof, mounted under the loading area, right side in direction of travel, Internal dimensions LxWxH 430x180x188 mm Frame -Torsion-resistant longitudinal beam chassis (longitudinal beams run continuously from the overrun hitch to the lighting panel) for high directional stability -Closed, fully welded and hot-dip galvanized steel frame profile for optimal stability -Integrated ramp storage compartment with clamping device and foldable number plate holder for secure and elegant storage of the loading ramps under the platform -With maintenance support to secure the tilted bed during service work Jockey wheel -Reinforced, automatic jockey wheel mounted on a separate cross member with a load capacity of 500 kg for secure parking of the trailer -Maneuvering handle with practical ratchet strap winder for easy handling Loading platform & superstructure -Solid steel floor spanning the entire width of the vehicle -Platform with maximum number of cross members for particularly high point loads Load securing -Patented Spinlock load securing system for greater flexibility and efficiency in load securing, DEKRA certified -Recessed lashing pins, symmetrically distributed in the steel floor -Lashing pins on and under the loading platform, each loadable up to 1,500 daN (kg) and rotatable by 360° Hsdpfsrmlzhex Anmol -Pot magnet with keychain for pulling out the lashing pins when the side wall is open Side walls -Robust steel side walls (400 mm), foldable and removable on all four sides, with galvanized over-centre latches and integrated tarpaulin and net rail, powder-coated in black grey (RAL 7021) -Four plug-in corner stanchions made of steel for high loads as well as easy loading and accommodation of accessories Hydraulics -Protected, mounted E-hydraulics with battery and high-performance charger for long service life -Emergency pump "Pumpless" including suitable socket adapter for convenient tilting with a battery-powered screwdriver in case of low battery Electrics -Lighting with 13-pin plug and protected rear lamps for long and safe operation of electrical components -Cable routing within the chassis longitudinal beams —> protection from external influences, therefore extremely durable

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 835 kg, največja dovoljena obremenitev: 2.165 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, velikost pnevmatike: 185R14C, Leto izdelave: 2025, Three-way tipper UDK 3017-30-14 Spinlock®, 350 mm side walls with angle lever locks, tailboard with steel cladding, electric hydraulics with emergency pump Pumpless, ramp compartment incl. folding license plate holder, maintenance support Internal body dimensions: 3,060 × 1,750 × 350 mm Loading height: 750 mm Payload: 2,160 kg Tyres: 185 R14C 8PR Chassis Torsion-resistant longitudinal beam chassis (longitudinal beams run continuously from the overrun device to the lighting bracket) for increased tracking stability Closed, fully welded and hot-dip galvanized steel chassis profile for optimum stability Integrated ramp compartment with tensioning system and folding license plate holder for safe and elegant stowage of ramps beneath the loading platform With maintenance support to secure the tilted body during servicing work Jockey wheel Reinforced automatic jockey wheel mounted on a separate cross member with a load capacity of 500 kg, ensuring safe parking of the trailer Maneuvering handle with practical strap reel for easy handling Loading platform & body Robust steel floor spanning the full width of the vehicle Body with maximum number of cross members for particularly high point loads Load securing Patented Spinlock load securing system for increased flexibility and efficiency, DEKRA certified 10 lashing pins recessed into the steel floor, distributed symmetrically Lashing pins above and below the loading platform, each rated up to 1,500 daN (kg) and rotatable 360° Pot magnet with key ring to pull out the lashing pins when the side wall is open Side walls Anodized, fully folding and removable aluminium side walls Galvanized angle lever locks with spring safety Hsdpfjxc Eh Asx Anmsl Tailboard with steel cladding, foldable, incl. anti-slip guard for loading ramps 4 plug-in steel corner posts for high loads and easy loading, and for attaching accessories Hydraulics Protected, mounted electric hydraulics with battery and high-performance charger for long service life Emergency pump Pumpless incl. matching socket wrench adapter for convenient and easy tilting with a cordless screwdriver in case of low battery

Stanje: rabljeno, največja dovoljena obremenitev: 2.000 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 2.675 mm, širina tovornega prostora: 1.515 mm, višina nakladalnega prostora: 30 mm, Skupna teža: 2.600 kg, visokonakladalna prikolica, odprta keson, vztrajnostna zavora, zadnji kiper s črpalko na akumulatorski vijačnik. Nakladalna višina: 700 mm. Pridržujemo si pravico do napak in vmesne prodaje. Hedpfx Aeym Ih Uenmjl

Stanje: novo, Long material trailer with rear light carrier Manufacturer: Unsinn Model: LM 3542-14-2040 Internal dimensions: 4260 x 2040 x 350 mm (L x W x H) Gross vehicle weight: 3500 kg Unladen weight: approx. 1030 kg Payload: approx. 2470 kg (Payload may vary depending on equipment and construction) Loading height: approx. 780 mm Rear light carrier extendable up to 2000 mm, flush with the upper edge of the loading area, loadable with max. 200 kg of long material (TEA), with superstructure length 3660 mm only extendable up to 1700 mm Stake pocket 100x100 mm, mounted flush with the loading surface Insertable stanchions 90x90 mm, total length approx. 3000 mm Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics Hedpfxoy H Savj Anmsl Hollow section construction, welded and fully hot-dip galvanized in an immersion bath Variable support bracket for drawbar mounting (visible in pictures but not included in offer) With self-adjusting brakes Variable support bracket for drawbar mounting (visible in pictures, but not included in the offer!) Reinforced jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 8 folding lashing recesses, recessed in the floor frame profile 8 lashing rings under the loading area Drawbar tube extendable without tools, free drawbar length approx. 3100 mm Aluminium hollow section, anodised, foldable on all four sides, removable with recessed locks 4 plug-in steel corner stakes for high load capacity Made from multiple laminated, screen-printed panels, 18 mm thick, seamless, anti-slip and waterproof Lighting with 13-pin connector Reversing light Including vehicle documents Possible options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Spare wheel incl. holder Toolbox Anti-theft device Registration of your new trailer at the vehicle registration office Variable support bracket for drawbar mounting (visible in pictures, but not included in the offer) We will gladly show you how you can finance your new trailer in convenient monthly instalments, and prepare an individual financing proposal for you. We have more than 2,000 trailers in stock at all times. You can find many of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show accessories not included in the standard scope of delivery. Due to continuous development, images and technical data may vary slightly. Errors and changes excepted!

Stanje: novo, 9930448 Construction Machinery Transporter UB with Swiveling Loading Ramps The universally applicable machine transporter from Unsinn, thanks to its high sidewalls, also enables the transport of bulk materials. Manufacturer: Unsinn Model: UB 3618-35-14 Internal dimensions: 3660 x 1800 x 300 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: approx. 770 kg Payload: approx. 2730 kg (payload figures may vary depending on equipment and design) Unique, torsion-resistant longitudinal beam chassis for optimum driving characteristics Welded hollow profile construction, fully hot-dip galvanized Body made from extremely robust steel sidewall profiles Axles with self-adjusting brakes Walk-on mudguards Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 10 sturdy lashing points on the sides, load capacity per lashing point 2000 kg 4 fold-down, adjustable aluminum ramps with integrated ground support, load capacity 3500 kg/pair The loading ramps allow for quick and easy loading of machinery Compulsory support on the loading ramps Ramps can be swiveled to the side for optimal loading of, for example, palletized goods using a pallet fork or forklift Floor made of multiple-bonded phenolic plywood, 18 mm, seamless, anti-slip, and waterproof Lighting with 13-pin connector and reverse light Marker lights Vehicle documents included Possible additional options and accessories for this trailer: Excavator bucket holder on the drawbar Mounted aluminum toolbox Spare wheel including holder For individual and tailor-made financing options, simply contact us! A further 1,500 trailers available at the Rosemeier Trailer Centre. Come and visit us. We are happy to advise you. Hsdpfx Ajy H Ruxsnmjl Images may show accessories not included in standard delivery. Due to continuous improvement, images and technical data may vary slightly. Subject to errors and changes!

Stanje: novo, Refrigerated trailer from Unsinn Fahrzeugtechnik with transport refrigeration and side door Manufacturer: Unsinn Model: UKT 0C 4217-35-14 Internal dimensions: 4260 x 1750 x 1900 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,120 kg Payload: approx. 1,880 kg (Payload information may vary depending on equipment and configuration) Loading height: 660 mm Colour: white RAL 9001 Side door with external bar lock Swivelling crank supports at the rear and front 230 V power generator for independent power supply during transport Three-sided stainless steel rubbing rail inside External stainless steel bar lock on the left rear door Refrigerated compartment lock on right rear door Rear door clearance: 1,740 x 1,890 mm Insulated floor plate with non-slip plastic flooring (anti-slip class R 12), permanently elastic and wear-resistant Longitudinal chassis made of robust welded steel frame, hot-dip galvanized AL-KO axles with automatically adjusting brakes Reinforced automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg Thermo sandwich construction using insulated panels, inner and outer walls of hot-dip galvanized and powder-coated steel sheeting, engineered for heavy-duty use Wall and insulated floor thickness: 60 mm Aluminium edging profiles Stainless steel rear portal Cooling unit Arktik 2000P mounted on the front wall (top): cooling capacity 2,050 W at +10°C internal and 30°C ambient temperature Temperature control range from -20°C to +10°C -> Please note: The specified temperature control range from -20°C to +10°C applies solely to the installed refrigeration unit. Due to the wall thickness of a positive cooler, this trailer is designed as a zero-degree cooler and is not suitable for permanent deep-freeze use. Hodpoy Db N Iofx Anmel Evaporator air flow: 1,130 m³/hour 230 V mains supply Intuitive control display for easy and user-friendly temperature settings Lockable control display protects against unauthorised access Digital temperature display for easy monitoring of the trailer temperature 230 V interior lighting High-quality workmanship - Quality Made in Germany Lighting system with 13-pin plug and reversing lights Front manoeuvring handles Marker lights Including vehicle documents Optional extras and accessories available for this trailer: Shock absorbers incl. 100 km/h approval certificate Spare wheel (mounted on side or front wall) Side lashing rail Cargo bars for optimal load securing Anti-theft device

Stanje: novo, Construction machine transporter UB with swiveling loading ramps and excavator arm support The universally applicable machine transporter by Unsinn, thanks to its high side walls, also allows for the transport of bulk materials. Manufacturer: Unsinn Model: UB 3618-35-14 Internal dimensions: 3660 x 1800 x 300 mm (L x W x H) Permissible total weight: 3500 kg Empty weight: approx. 770 kg Payload: approx. 2730 kg (payload can vary depending on equipment and configuration) Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics Hollow profile construction, welded and fully hot-dip galvanized by immersion Body made from extremely robust steel side wall profiles Axles with self-adjusting brakes Walkable mudguards Excavator bucket support on the drawbar (not shown in pictures, but included in delivery) Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg 10 robust lashing points on the sides, load capacity per lashing point 2000 kg 4 foldable and movable aluminium loading ramps with integrated ground supports, load capacity 3500 kg/pair The loading ramps allow for fast and easy loading of machines Compulsory support on the loading ramps Loading ramps can be swiveled to the side, ideal for loading e.g. pallet goods with a pallet fork or forklift Floor made of multi-bonded phenolic plywood, 18 mm, continuous without joints, non-slip and waterproof Lighting with 13-pin plug and reversing light Marker lights Hjdpfxey Dbqro Anmel Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h approval certificate Mounted aluminium toolbox Spare wheel incl. holder Anti-theft device Registration of your new trailer at the vehicle licensing authority

Stanje: novo, 9935373 Timber Material Trailer with Extending Drawbar Manufacturer: Unsinn Fahrzeugtechnik Model: ULM 4820-35-14 Gross Vehicle Weight: 3,500 kg Unladen Weight: approx. 1,075 kg Payload: approx. 2,425 kg (payload may vary depending on equipment and configuration) Dimensions: approx. 4,860 x 2,040 x 750 mm (L x W x H) Drawbar can be extended without tools (maximum drawbar length: 3,100 mm) 4 stake pockets 100 x 100 mm, flush-mounted with the loading platform 2 insertable stakes 90 x 90 mm (total length approx. 3,000 mm) with various lashing points for load securing Adjustable support bracket for the extendable drawbar Torsion-resistant longitudinal chassis for optimum driving stability Sturdy hollow section construction, fully welded and hot-dip galvanized throughout Reinforced jockey wheel for safe parking when loaded, load capacity 500 kg 8 foldable, rattle-free lashing brackets, recessed into the floor profile 8 additional lashing eyes under the loading platform 8 folding lashing recesses 8 lashing eyes under the loading area Internal long-travel metal fasteners Removable sideboards and corner stakes Marker lights Includes vehicle documents Optional equipment and accessories for this trailer: Shock absorbers incl. 100 km/h approval certificate Spare wheel incl. holder Anti-theft device Registration of your new trailer with the vehicle registration authority Hsdpfoy Axp Asx Anmjl

Stanje: novo, največja dovoljena obremenitev: 2.730 kg, skupna masa: 580 kg, Leto izdelave: 2024, Prvoklasna niskopodna prikolica za transport građevinskih mašina, top-model UBA 3618-35-14 (stara oznaka: 3536-14-1800) sa 2.730 kg nosivosti. Ukupna dozvoljena masa 3.500 kg, utovarna površina: 3.660 × 1.800 × 300 mm. Bočno pomične aluminijumske rampe za utovar, utovarne rampe se mogu zakretati u stranu, novo. Opcionalno sa amortizerima za brzinu do 100 km/h (+200 EUR) Opcionalno sa ležištem za kašiku ili drugim dodacima Hsdevrbvfepfx Anmjl Prikazana građevinska mašina nije uključena u ponudu. Zadržavamo pravo na greške i međuprodaju! Dodatne informacije: Prednje gume: 185R14C Zadnje gume: 185R14C Zemlja proizvodnje: Nemačka Za više informacija obratite se Philipu Mülleru, , p-).

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Vehicle Data – Certificate of Conformity (GTP 35) Manufacturer: Unsinn Fahrzeugtechnik GmbH Type: GTP 35 Variant: 3.V. Version: E.T.M.K.3.R.1 Trade Name: UDK 3030-14-1750 Vehicle Category: O2 Vehicle Identification Number (VIN): WUF2H5800S0217734 Date of Manufacture: 07.03.2025 Type Approval Location: e12007/4601164*04 Permissible Speed: 140 km/h — Dimensions • Axles: 2 / 4 • Wheelbase: 3292 mm • Axle spacings: • 1st-2nd axle: 2572 mm • 2nd-3rd axle: 720 mm • Length: 4530 mm • Width: 1930 mm • Height: 1100 mm • Distance from centre of coupling to rear: 4492 mm • Loading platform length: 3060 mm • Rear overhang: 1200 mm — Weights • Curb weight (ready-to-drive): 489 kg • Axle 1: 232 kg • Axle 2: 232 kg • Technically permissible total weight: 3000 kg • Axle 1: 1500 kg • Axle 2: 1500 kg • Axle group 1: 3000 kg • Technically permissible drawbar load: 100 kg — Tyres and Rims • Wheel/tyre combination (e.g., standard equipment): 185R14C 104N on 5.5Jx14 ET30 • Permissible combinations according to notes: 195R14C, 185R14C, 185/60R12C, 195/60R12C, 195/50R13C – with various rim sizes (e.g., 5.5Jx14, 6Jx14, 5.5Jx13, etc.) Offset (ET): 25–35 mm — Towing Device • Approval number: E1 55R-011594 Add.02 • Ratings: • D-value: 26.9 kN • Static vertical load (S): 325 kg — Brakes, Body, Equipment Hsdpfxjwywyzo Anmol • Brake: Mechanical • Body code: DC10 • TPMS (Tyre Pressure Monitoring System): No • Shock absorbers required for 100 km/h approval • Not certified according to UN ECE R 155/156 --- All information subject to change — illustrations may differ —

Stanje: novo, lastna masa: 770 kg, največja dovoljena obremenitev: 2.730 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,9 m³, barva: srebrn, gradbena višina: 2.030 mm, delovna širina: 2.300 mm, Reverse automatic system, drive-on ramps, hot-dip galvanization, rear swiveling ramps, 12 lashing rings, * IMMEDIATE AVAILABILITY * incl. rear swiveling ramps / 12 lashing rings / drive-on ramps Technical specifications: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATE! - Permissible total weight: 3,500 kg - Unladen weight: 770 kg - Payload: 2,730 kg - Internal dimensions: 360 x 180 x 30 cm (L x W x H) - Total external dimensions: 558 x 230 x 203 cm (L x W x H) - Loading edge height: 45 cm - Tires: 185R14C steel rim - Brakes: yes - Jockey wheel: yes, automatic - 100 km/h: available at extra cost - incl. vehicle documents Body Structure: - Floor: 18 mm phenolic plywood - Side walls: solid steel side panels - Side wall height: 30 cm - Chassis: ALKO rubber suspension axle - Tipping function: no - Hydraulic: - - Ramp angle: approx. 14° - Overrun device & brake: ALKO - Frame/chassis: welded steel frame, hot-dip galvanized - Extension: at extra cost - Lashing rings: 22 pieces, mounted laterally in the frame (2,000 kg/daN) - Supports: integrated into the ramps - Ramps: 2x aluminum, upright on shaft, swiveling - Lighting connector: 13-pin Hjdpju Hrkaofx Anmjl - Registration: ZBII & COC documents Standard equipment: - New feature: side-folding ramps for loading with forklift - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Loading surface made of multi-layer bonded phenolic plywood, 18 mm, seamless, anti-slip and waterproof - Hollow profile construction, fully welded and hot-dip galvanized in immersion bath - Body made from robust steel side wall profiles - Reinforced automatic jockey wheel for stable parking of loaded trailer, load capacity 500 kg, with non-slip grating and integrated supports - Premium maneuvering handle with strap reel - 12 pairs of cargo securing points, each rated to up to 2,000 daN per lashing point - Frame completely hot-dip galvanized in immersion bath - 2 foldable and laterally adjustable aluminum drive-on ramps with integrated ground support, side swiveling, 3,500 kg/pair load capacity - Reverse automatic system - ALKO overrun device and parking brake - Sturdy ramp locks - 13-pin plug - Reversing lights - Large-sized safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Central automatic jockey wheel - Registration documents: ZBII and COC documents Special equipment included in the price: - Aluminum swiveling ramps at the rear Optional accessories available upon request: - Bucket rest - 100 km/h approval with shock absorbers - Side wall extension - Mesh extension 60 cm - Closed steel extension 60 cm - Spare wheel - Toolbox - Net hooks - Additional lashing rings - Slotted-hole rails for tie-down straps & locking bars - Batten strip with rubber coating for tie-down straps & locking bars - Reversing light - Lashing straps - and more New vehicle with warranty and TÜV. Financing offers available! Descriptions and images are protected by copyright!! Over 800 trailers immediately available on site! We have been specialist dealers & repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Delivery throughout Germany available at extra cost! Anhaenger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale reserved.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 670 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 185/65R14, barva: srebrn, Leto izdelave: 2024, Chassis Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics Hollow section construction, fully welded and hot-dip galvanized by immersion Jockey Wheel Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Premium maneuvering handle with strap reel Load Securing 6 foldable lashing recesses, flush-mounted in the floor frame profile, each rated up to 600 daN, Dekra certified Side Walls Anodized aluminum hollow section, foldable and removable on all four sides, with recessed locks 4 insertable heavy-duty steel corner posts Loading Platform Made of multi-glued phenolic resin-coated plywood, 18 mm, continuous without joints, slip-resistant and waterproof Hsdpfxouzvtzj Anmjl Electrics Lighting with 13-pin plug and reversing light