Stas Mf Schubboden 13.50 Biostar Neufahrzeug* nakup rabljenega (6.529)

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Ncjdjfi Nmwepfx Ahlsw Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Ncedpfxjfi Nmpj Ahlow Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: rabljeno, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.475 mm, prostornina tovornega prostora: 90 m³, Leto izdelave: 2022, Oprema: ABS, Vehicle identification no.: YE6S300ZXN0000950 German MOT due FRAME: ALUMINIUM – Welded aluminium construction with additional reinforcement at axle mounts Unladen weight: 7,650 kg Volume: approx. 90.0 m³ Dimensions: 13,500 x 2,475 x 2,565/2,752 mm Side walls inside & outside smooth Side wall profiles approx. 600 mm wide, 30 mm thick, 3 mm inside, 2 mm outside (grain design) FLOOR BOARDS: 21 aluminium floor boards, 7 mm smooth, extremely durable with welded aluminium end caps Cramaro overquick with electric remote control MERCEDES-BENZ JOST axles with disc brakes 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Crank-operated landing gear Tyres: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel ALUMINIUM wheels Nedsylfafjpfx Ahlocw Changes, prior sale and errors excepted. This description serves as general identification of the vehicle and does not constitute a warranty in the legal sense. The contractual description at the time of sale is binding. Our offer is generally without new TÜV inspection. Should you require a new TÜV inspection, we would be pleased to provide a quote from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Nodpfeyh S Aijx Ahlscw Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Podvozje izdelano iz samonosilne aluminijaste konstrukcije z ustreznimi ojačitvami v spodnjem pasu za izjemno visoko stabilnost in trdnost. Agregatno podvozje iz aluminija, višina okvirja 140 mm (maks. 39 t), osi in vzmetenje "diskovne zavore 22,5", osi Jost 3 x 9 ton s sistemom zračnega vzmetenja DC, dvig in spuščanje, Wabco Smartboard, elektronski indikator obrabe zavornih ploščic (BVA) za prikaz na kontrolni plošči (brez opreme za kontrolno ploščo), 1. in 3. os ločeno dvigljivi z možnostjo pomoči pri vožnji (brez opreme za kontrolno ploščo), 3. os dodatno opremljena z Optiturn, zračnim vzmetenjem ECAS. Pnevmatike in platišča 6 koles s pnevmatikami velikosti 385/65 R 22.5, izbira proizvajalca, aluminijasta platišča Alcoa, barva satin, 11,75x22.5 ET 120 (s jeklenim središčem + približno 120 kg). Podporni členi aluminijasti podorni členi, proizvajalec Alu-Leg, nosilnost 2 x 10 ton, za uporabo z zračnim vzmetenjem uporabljamo vrtljive podnožke. Zavorna napeljava v skladu s standardom E.E.G., dvovodni zavorni sistem, sistem EBS E od proizvajalca Wabco s sistemom RSS (podpora stabilnosti pri vožnji), zavora s sistemom pomnilnika tlaka, ki deluje na dveh osi, upravljanje na zadnji strani, aluminijasti rezervoar zraka, premium modulator. Električna napeljava v skladu s smernicami STVZO, 2 svetilni enoti s 5 žarkami, tip Aspöck Europoint III, integrirane v zadnji aluminijasti del, 24-voltni sistem z 1 x 15-polnim in 2 x 7-polnim vtičem, s stranskimi lučmi za obrobo v LED izvedbi, 2 delovni reflektorja na zadnji strani, 2 LED delovna reflektorja na straneh, v višini podpornih členov, 1 LED delovni reflektor znotraj na sprednji levi strani, upravljanje od zunaj. Ncjdpfx Ajy U Syrehljw Nadgradnja/kiper "Notranjost nadgradnje popolnoma zvarjena" obremenitev čelne stene 17.250 dkn, zadnja in stranske stene 10.250/13.400 dkn, aluminijasta kiper nadgradnja, stranske stene iz 30 mm debelih aluminijastih profilov (2-3 mm), širina 600 mm, popolnoma zvarjene z zgornjim in spodnjim pasom, profili stranske stene popolnoma zvarjeni! Pod kot sistem za izpihovanje blaga, nameščen na 140 mm aluminijastih prečnih nosilcih, nosilnost pod tlaki približno 7 t/m2, prečni nosilci nameščeni dovolj blizu (približno 350 mm), aluminijasta čelna stena s 600 mm profilom stranske stene, debeline 2-3 mm, ravna izvedba, posebni aluminijasti vogalni profili v poševni izvedbi, gladka zadnja stena, ravna izvedba, z 2 aluminijastimi krilnimi vrati, debeline 50/30 mm, z 4 vrtljivimi zaklepnim mehanizmom, pritrjena v zvarjeni aluminijasti zadnji okvir, v teflonskih in inox ležajih, stranska stena, pritrjena v ojačani aluminijasti zgornji pas, z "Kevlarovo ponjavo" za popolno izpraznitev, stransko tesnilo s krtačo in dodatna Kevlarova ponjava na strani, integriran izlivni lijak s pokrovno ploščo, ki se odpre, na dnu zadnje strani, upravljanje od zunaj, na levi strani zadaj, okno za pregled na zadnji strani, na levi strani, po 1 preizkusni zaporek v zadnjih vratih, torej 2 kosa, servisna vrata na levi strani, v čelni steni. Hidravlični sistem "Cargo Floor" 24-ploščni sistem, gladka izvedba! Sistem za izpihovanje blaga v podu, s hidravlično premikanimi aluminijastimi profili na aluminijastih pravokotnih profilih, ležaji z okoli 880 PE-HD drsniki, debelina poda približno 8 mm, hidravlika s približno 200 mm delovnega hoda, fiksne točke na čelni steni, ločena možnost za priključitev hidravlične cevi pod vozilom, s fiksnimi točkami, velikost cevi NW 21, fiksne točke z še določeno velikostjo in izvedbo,

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Šasija izdelana iz samonosilne aluminijaste konstrukcije z ustreznimi ojačitvami v spodnjem pasu za izjemno visoko stabilnost in trdnost? Agregatna šasija iz aluminija, višina okvirja 140 mm (maks. 39 ton), osi in vzmetenje "kolutna zavora 22,5", osi Jost 3 x 9 ton z zračno vzmetjo DC, dvigovanje in spuščanje? Wabco Smartboard? elektronski indikator obrabe zavornih ploščic (BVA) za prikaz na nadzorni plošči (brez opreme za nadzorno ploščo)? 1. in 3. os ločeno dvigljivi z opremo za lažji zagon (brez opreme za nadzorno ploščo), 3. os dodatno z Optiturn, zračna vzmet ECAS. Pnevmatike in platišča 6 koles s pnevmatikami velikosti 385/65 R 22.5, izbira proizvajalca na aluminijastih platiščih Alcoa satin, 11,75x22.5 ET 120 (z jeklenim robom + pribl. 120 kg). Podporne noge aluminijaste podporne noge, proizvajalec Alu-Leg, 2 x 10 ton nosilnosti, za uporabo z zračno vzmetjo uporabljamo vrtljive podplate. Nedpfx Aogcw Riehlscw Zavorni sistem v skladu z normo E.E.G., dvovodni zavorni sistem, sistem EBS E Wabco z RSS sistemom (podpora stabilnosti pri vožnji), zavora s pomnilnikom deluje na dveh osi in se upravlja na zadnji strani, aluminijasti zračni rezervoar, vrhunski modulator. Električna napeljava v skladu z direktivami STVZO z 2 petkamernimi lučmi tipa Aspöck Europoint III, integriranimi v aluminijasto zadnjo stran, 24-voltni sistem z 1 x 15-polnim in 2 x 7-polnim vtičem, s stranskimi gabaritnimi lučmi v LED izvedbi, 2 delovni žarometa na zadnji strani, 2 LED delovna žarometa stransko, na višini podpore, 1 LED delovni žaromet notri spredaj, na levi strani, upravljanje od zunaj. Nadgradnja/kiper "Notranjost nadgradnje popolnoma zvarjena" nosilnost čelne stene 17.250 dkn, nosilnost zadnje in stranskih sten 10.250/13.400 dkn, aluminijasta kiper karoserija, stranske stene, 30 mm debele aluminijaste profile (2-3 mm), 600 mm široke, popolnoma zvarjene z zgornjim in spodnjim pasom, profili stranskih sten notri popolnoma zvarjeni!!, dno kot sistem potisnega dna, nameščen na 140 mm aluminijastih prečnih nosilcih, nosilnost tal približno 7 ton/m2, prečni nosilci nameščen ožje (približno 350 mm), aluminijasta čelna stena z 600 mm profilom stranske stene, 2-3 mm debel, v ravni izvedbi, posebni aluminijasti vogalni profili v poševni izvedbi, ravna zadnja stena v ravni izvedbi z 2 aluminijastimi krilnimi vrati, 50/30 mm debeline, z 4 vrtljivimi zapahi, v zvarjen aluminijast zadnji okvir, pritrjeno v teflonskih ležajih in ležajih iz nerjavečega jekla, sočasno gibanje v ojačanem zgornjem aluminijastem pasu, aluminijasta stena z "Kevlar tkanino" za popolno izpraznitev, stransko tesnilo s krtačami in dodatna Kevlar tkanina stransko, integriran izpustni lijak s pokrovno ploščo, ki se odpira, na dnu, upravljanje od zunaj, na levi zadnji strani, okno za pregled zadaj na levi strani, po 1 preizkusni odprtini v zadnjih vratih, torej 2 kos, servisna vrata na levi strani v čelni steni. Hidravlični sistem "Cargo Floor", sistem s 24 ploščami - gladka izvedba! Sistem potisnega dna v tleh, z hidravlično premikanimi aluminijastimi profili na aluminijastih štirikotnih profilih, ležaji z okoli 880 PE-HD drsniki, debelina tal približno 8 mm, hidravlika z okoli 200 mm giba, fiksne pritrditve na čelni steni, ločena možnost priključka hidravlične cevi pod vozilom, s fiksnimi pritrditvami, velikost cevi NW 21, fiksne pritrditve z velikostjo in izvedbo, ki bo navedena pozneje, delovni tlak 190-maks. 240 bar, aluminijasti končni kosi, zvarjeni v dno, električno upravljanje zadaj na levi strani, s k

Stanje: novo, konfiguracija osi: 3 osi, prostornina tovornega prostora: 90 m³, Leto izdelave: 2026, Oprema: ABS, Osna razdalja (mm) 1310-1310 Višina sedla (mm) 1150 Širina šasije (mm) 1200 Širina nakladalnega prostora (mm) 2475 Notranja višina spredaj (mm) (IHF) 2641 Notranja višina zadaj (mm) (IHB) 2778 Nakladalna dolžina (mm) 13513 Višina ojnice šasije (mm) 217 Skupna širina (mm) 2550 Skupna dolžina (mm) 14000 Osi, zavore in vzmetenje Osi SAF Zavorna izvedba kolutne zavore Tip zavore SAF - SBS 2220 Vgradna globina (ET) 120 Opcija 1. os z dvižno osjo in pomočjo pri speljevanju Aktivacija pomoči pri speljevanju prek stikala v tovornjaku Opcija 3. os z dvižno osjo Indikator obrabe zavornih oblog Zračno vzmetenje ECAS z dvigalnim in spustnim ventilom Spuščanje zračne blazine preko Smartboard, kot tudi prek dvigalnega-spustnega ventila Konzola za upravljanje EBS na levi strani v smeri vožnje, za osmi Standardni Smartboard Konzola za zrak in elektriko na sredini s konzolo (galgen) Kot jeklene menjalniške podporne noge, tip Weweler, z izravnalnimi nogami, enostransko upravljanje in 2 prestavi Pozicija ročaja za dvigovanje zunaj Pnevmatike 385/65R22.5 Wabco Trailerpulse Tip pnevmatike: regionalna razdalja TPMS tip senzorja: senzor nameščen na platišču Dobavitelj TPMS senzorja: ZF Osvetlitev Aspöck Tip osvetlitve ECOLED III 2 kosa LED vzvratnih luči, zadaj levo in desno v smeri vožnje na nosilcu luči Pozicija delovnih žarometov (upravljanje prek stikala): 2 kosa LED vzvratnih luči spredaj v smeri vožnje LED v prečnem nosilcu vrat 2 x 3 LED Blatniki in zaščita proti podletu Konzola za upravljanje premikajočega dna levo za osmi Hidravlična spojka vrtljiva - velikost 3/4, povratni tok desno Hidravlična spojka - ženski del, povratni tok vrtljive spojke Povratna hidravlična spojka - velikost 1 - ženski del Hidravlična cev - dolžina 3.000 mm Lokacija hidravlične spojke: možnost priklopa na čelni steni (dodatno z možnostjo priklopa na podporne noge) Orodjarna v smeri vožnje, priklop zraka na strani armaturne plošče Aluminijasta lestev 3,80 m - na desni v smeri vožnje Držalo za metlo in lopato nameščeno na bočni zaščiti v smeri vožnje levo Razdalja spodnjega vogalnega profila do zgornjega bočnega zidu zadaj 2649 Profil čelna stena 3 mm - 2 mm Servisna vrata na levi v smeri vožnje Bočna stena Profil bočne stene 3 mm - 2 mm Obrablene plošče pravokotne 1500 x 1000 x 4 mm Sistem premičnega dna blagovne znamke Cargo Floor Upravljanje tla s pomočjo daljinskega upravljalnika Kontrolni tip Cargofloor CF 500 SL-C - E-CONTROL Število talnih profilov 21 Talni profil 8 mm rebrasto, inox Z dodatnimi plastičnimi vodili pod tlemi Ojačitev zaključnih kap profilov: inox čevlji z aluminijasto obrabno ploščo nad pokrovom Senzor temperature olja za sistem premičnega dna Stena za popolno izpraznitev ALU Ležišče stene za popolno izpraznitev 6 koles Zadnja vrata Tip zadnje stene: dvokrilna vrata Zadnja stena aluminij Izvedba: delitev 1/2 na 1/2, s prečnim nosilcem vratic Najprej se odpira desni krilni del Prečni zaključek vrat v vrtljivi izvedbi Material prečnega zaključka aluminij Zaklepanje zadnjih vrat 1x vrtljiva palica / pol vrat Ncedpozir Ivsfx Ahlsw Število ročajev - levi krilci: 2 ročaja na vrtljivo palico Število ročajev - desni krilci: 1 ročaj na vrtljivo palico Pripenjanje odprtih vrat vzmetni nosilec s plastično zaščito Tesnilo zadnje stene s standardnim gumijastim tesnilom Dodatna zapora zadnje stene: pnevmatska, enostransko delujoča Upravljanje dodatne zapore ročno s strani na armaturni plošči

Stanje: novo, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.641 mm, prostornina tovornega prostora: 91 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor (walking floor) * King pin load (National, t): 12 * Axle load (National, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor semi-trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Activation of traction aid via button in truck (installation of button not included) and by pressing brake pedal three times * Option: 3rd axle with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via smartboard as well as lift/lower valve * Pneumatic coupling head: European palm coupling * Control console: EBS control on driver's side, behind axles * Standard smartboard * Air and electrical console centrally mounted with gantry * Landing legs: Weweler * As steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation and 2 speed stages * Position of landing leg crank handle: outside * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Steel * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 LED reversing lights, mounted at rear left and right on the lamp holder * Work lights (operated via switch): 2 LED reversing lights at front left and right, mounted near landing legs * Protection of lighting unit: One-piece mudguard * LEDs in door end cross member: 2 x 3-function LED * Operating underrun protection: Fixed underrun bar * Mud flaps underrun protection: Black with STAS logo * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: Swivel coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling - hose: 3,000 mm * Hydraulic coupling - position: Connection possible at front wall (additional connection possible at landing legs) * Hydraulic positioning: Pressure return, pressure left, return right (CON) * Number of mud flaps on fenders: 2 pieces * Toolbox * Air connection mounted laterally on control panel * Aluminium access ladder 3.80 m - right side * Broom and shovel holder * Two plastic wheel chocks * Profile front wall: 3 mm - 2 mm * Profile side wall: 3 mm - 2 mm * Moving floor system: Cargo Floor brand * Floor system operation: Radio remote control * Cargo Floor Control type: CF 500 SL-C - E-CONTROL Nedpfxoy Dmu No Ahlecw * Number of floor profiles: 21 * Front wall inclination (°): 90 * Rear wall inclination (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Residue emptying wall: Aluminium * Storage for residue emptying wall: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: Swing door, 1/2 to 1/2 division, with door end cross member

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 03/2026, Oprema: ABS, Stas S300ZX Moving Floor Trailer 90 m³ Nsdpfx Ahoxycilslscw * 90 m³ loading volume * SAF axles * 1st and 3rd axle liftable * Air suspension * Pneumatic control * Disc brakes * Sliding tarpaulin * Smartboard * Double-wing rear doors with rotary bar lock * Access ladder and platform at the front wall * ABS connection * 2 x 7-pin electrical connections * ISO air couplings with red and yellow coupling heads * 21 wooden floor slats * Lashing rings on the sides of the loading area * Foldable rear light protection * Loading pressure gauge Subject to prior sale and errors excepted! Sale exclusively according to our general terms and conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some of these may result from transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Information: This sales advertisement does not constitute an offer in the sense of §145 of the German Civil Code (BGB). Rather, it serves as information to initiate a contract. All information provided here is without guarantee and does not constitute warranted characteristics.

Stanje: rabljeno, največja dovoljena obremenitev: 27.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2025, prostornina tovornega prostora: 100 m³, Leto izdelave: 2023, Oprema: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR – STEERED AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross Vehicle Weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg Fifth wheel height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS FIFTH WHEEL HEIGHT: Exact fifth wheel height is 1,150 mm. AXLES: Tridem axle set. Manufacturer: SAF – CUSTOM DESIGN (CD). Capacity: 3 x 9 t. Suspension: Original SAF air suspension. Brakes: Large disc brakes. Rim offset: ET 120. Wear indicator: with. First axle is an automatic lift axle controlled by the EBS-E system. The third axle is a trailing steer axle. Connection: BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID: The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION: Lift and lower function. Aluminium air tank. STEERING AXLE LOCKING: Trailing steering axle locking is achieved as follows: – via reverse lights – with a button in the truck (truck equipment not included). TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120. BRAKING SYSTEM – EBS: EBS-E system WABCO 2S/2M – PREMIUM MODULATOR. Two-line compressed air brake system according to CE directives. Spring-loaded parking brake on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING – ASPÖCK: 24 volt electrical system. 2 x 7-pin + 1 x 15-pin sockets ISO connection. Aspöck light set. Orange LED side marker lights mounted on trailer side. Without rear distribution box – NORDIC. REAR LIGHTS IN UNDERRUN PROTECTION: Lighting is mounted in fixed aluminium underrun guard. With foldable aluminium light protection cover. 2 x 1 five-chamber lights – EUROPOINT III – LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection below the body ahead of the landing legs. ACCESSORIES Ncedpfsxplxzsx Ahlew EXTENDABLE LADDER REAR: Extendable ladder integrated at the rear of the vehicle (right-hand side). PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm). SPARE WHEEL HOLDER: Aluminium single spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminium plank profiles. INTERIOR SEALING BETWEEN FLOOR AND FRONT WALL: Fixed seal between floor and front wall using aluminium profile and PVC seal. SIDE WALLS: Smooth finish inside and out. Double-walled side wall profiles: 600 mm wide, 30 mm thick, 3 mm inner, 2 mm outer (grain version). Side wall profiles are continuously welded on the inside. WEAR PLATE: Wear plate in aluminium, rectangular, at rear inside, 2,000 (L) x 1,500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electronic control. 21-board floor system. Drive segment comprises 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear stainless steel end plate. FLOOR OPERATION: E-control – Electric with radio remote control (original Cargo Floor). Loading – stop – unloading via switch. Manual emergency operation via unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 ribbed aluminium floor boards – 8 mm thick with welded aluminium end caps. REAR DOOR: 2 portal doors ...

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.435 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.690 mm, * JOST axles * Air suspension * Lift axle * Wabco SmartBoard Nsdpfx Ahev Hlwielscw * Storage box * Aluminum rims * Tarpaulin cover -----Internal vehicle number: 10290----Subject to errors and prior sale.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, * Dvižna os * ALU platišča * JOST osi * Pomikajoča cerada * Lastna teža: 7.760 kg -----Interna številka vozila: 10296----Pridržujemo si pravico do napak in vmesne prodaje Podpora preko WhatsAppa na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. Ncodpfx Ahsw Rit Tslew

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 13.179 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.800 mm, Oprema: ABS, * Stas premična tla Nodsxu Th Uepfx Ahljcw * Pokrivna ponjava * ALU platišča * SAF osi * Lastna teža: 7790 kg * Leto izdelave: Interna številka vozila: 11498-----Pridržane so napake in vmesna prodaja

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 56 m³, Oprema: ABS, Chassis – Lightweight Version Made from aluminium (15-6-12) Two fully automated welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Axles and Suspension - 430 mm disc brakes - Jost (ex Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, air bellows centrally positioned on the chassis longitudinal member - 1st axle liftable with start-up aid and manual forced lowering - Smart Board Info Center - Raise/lower valve - BVA brake wear indicator Tyres and Wheels - 6 wheels with 385/65 R22.5 tyres from selected manufacturers, steel rims 11.75 x 22.5 ET 120 Nedpefi Nmujfx Ahlscw Landing Gear - Mechanical version with single-sided operation, 2-speed gearbox, swiveling foot for air suspension Brake System - According to E.G. standard, two-line Wabco system, spring-loaded parking brake on two axles, and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Info Center, aluminium air reservoir system Electrical System - According to German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber Aspöck Ecopoint 2 lights, 24V system with 2 x 7- and 1 x 5-pin sockets, side marker lights, 2 separate LED reversing lights at the rear, 1 LED interior light Tipping Body / Body Construction (fully welded interior) - Aluminium tipper body - Sidewalls: 30 mm thick plank profiles (2–3 mm), welded 600 mm wide - Floor: 8 mm high-wear resistant alloy (5383H34/HB 110) - Front wall: 4 mm reinforced, straight version - Rear wall: Universal door, straight version with 2 wing doors in 2/3-1/3 division with one grain chute, or optional in 1/2-1/2 version with one grain chute per door - Aluminium round profile sealing at rear doors (side and bottom) - Rear doors partially smooth aluminium-plated - Universal door operation: pneumatically automatic with separate lever lock - Aluminium swing-out rear canopy - 2 hold-down devices with rubber buffers on tipping body frame at the front wall Hydraulic System – Tipping Cylinder with Large Housing - Hydraulic cylinder mounted on the front wall, max. working pressure 150 bar, manufacturer Edbro - Approx. 2.5 m hydraulic hose and 1" loose half coupling - Tipping angle approx. 48° Accessories - 6 Parlok mudguards - Complete splash apron covering the entire vehicle width mounted to the underrun protection - Aluminium spare wheel holder - Right-side foldable side underrun guard - Large toolbox type 860 - Approx. 3 m aluminium ladder - 3 aluminium pivoting bows approx. 150 mm raised in the middle - Additional centrally mounted bow bracket for a total of 2 bows to increase loading width - Rolling tarpaulin with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with roll tarp system, perimeter rubber cord at the rear closure of the tarp with two hooks to fix at rear pivoting bow - Walkway on chassis frame painted in chassis color - Tarpaulin quick release lock - Rear tarp closure with welded-in rubber seal for water ingress protection - Robust, foldable underrun protection with two towing eyes left and right incl. pin - 2 "Clear-Pass" splash guards on the fenders (EG standard) - Aluminium grain funnel with sack, mounted on the side of the frame - Holder for shovel, broom, and scraper above the axles +€590 delivery charge Available in 50 m³ – 56 m³ Loading compartment length: 9,700 mm and 10,500 mm * Price varies according to equipment configuration

Stanje: novo, največja dovoljena obremenitev: 34.200 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.820 mm, prostornina tovornega prostora: 91 m³, Leto izdelave: 2026, Oprema: ABS, Stock no. 5739 Immediately available! Purchase, rental, or hire-purchase options available upon request! Approx. 91 m³ Stas moving floor semi-trailer with 10m floor / radio remote control / front service door / RENT / PURCHASE ---- * Manufacturer: Stas * Model: S300ZX Biostar * Year of manufacture: 2026 * Gross weight: 42,000 kg * Unladen weight (manufacturer specification): 7,800 kg * Payload: 34,200 kg * Axles: 3x SAF with 1st axle as lift axle and traction aid / disc brakes Ncedjyz H Spopfx Ahljw * Tyres: 385/65 R22.5 on steel rims * Suspension: Air suspension with ECAS lift/lower function * EBS * Volume: approx. 91m³ (13.50 m length x 2.47 m width x 2.82 m height) * Colour: Superstructure RAL 9006 / Tarpaulin black SIO7999 / Chassis galvanised * Double-wing rear doors with pneumatic locking * Extendable step ladder on right side * Lift axle traction aid via truck push button * Smartboard * Telescopic landing legs * PVC toolbox 830x500x470 mm * 2 LED reversing lights rear left and right * 2 additional LED reversing lights at landing legs * 1 interior front wall LED * Ecoled 2 LED rear lights * Cargo Floor 10 mm ribbed floor CF500SL-C -E Control * V2A stainless steel end plate * Additional plastic guides under floor profiles * Radio remote control * Moving partition wall * Sliding roof with tension straps Panama 900 g/m² * Tarpaulin fasteners * Front service door * 2 x 3 LEDs in rear crossmember above door * Smartboard German semi-trailer!! German documentation!! NEW VEHICLE!! Notice regarding potential errors in the listing: Despite careful creation of the listing, occasional errors may occur in the text or details. We assume no liability for mistakes, alterations, or prior sale. All information is supplied without guarantee. Please contact us to confirm details or for any further questions.

Stanje: novo, največja dovoljena obremenitev: 29.710 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.610 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Leto izdelave: 2026, Oprema: ABS, New vehicle – available for purchase, rental, or lease with purchase option, subject to agreement! STAS 60 m³ moving floor trailer with Cargo Floor system and remote control – Rental option available! ---- * Manufacturer: Stas * Model: Farmstar * First registration: - (new vehicle) * Colour: Superstructure RAL 9007 grey aluminium, chassis RAL 9005 black, tarpaulin black * Volume: 60 m³ (approx. 10.61 m long x 2.475 m wide x 2.30 m high) * Gross weight: 39,000 kg (technical) / 36,000 kg (permitted) * Unladen weight (according to registration): 6,290 kg * Payload: 29,710 kg * Axles: 3x Jost axles / 1st axle lift axle / starting aid / disc brakes * Tyres: 385/65R 22.5 NEW on Speedline Diamond aluminium rims * Suspension: Air suspension with lift & lower * EBS Wabco * CARGO FLOOR CF 500 SL-C with remote control * 21-board floor system with additional plastic inserts beneath the floor profiles * Floor end caps stainless steel * 6 mm ribbed floor * Moving bulkhead with stainless steel handles * Control box rear left * Operating platform with access steps front right and left * Hydraulic connections front with 3 m hoses (additionally connectable to landing legs) * Pressure 1" female * Return 1" female * Swing door (50/50) with 2x locking rods and 1x pneumatic lock * Sidewalls smooth (grain specification), fully welded inside and out * Roll-top tarpaulin (680g/m²) with central locking * 3x cross members * Single mudguards * Full-load support legs * Tool box rear right * Shovel and broom holder left * Smartboard * TPMS – tyre pressure monitoring system * Aluminium ladder right * Extendable ladder rear right * Rear aluminium buffer Ncjdpfxjyz H S Aj Ahlew * One-piece foldable aluminium plate to protect rear lights * 2x LED work lights (left + right) * 2x LED reversing lights rear * 2 x 3 LEDs in door header rail New vehicle – available immediately! Available for rental, purchase, or lease with purchase option (subject to prior agreement)! Disclaimer regarding potential listing errors: Despite careful preparation, errors may occur in the text or technical data. We assume no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify any questions.

Stanje: novo, največja dovoljena obremenitev: 29.560 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Oprema: ABS, Stock no. 5640 Purchase, rent, or rent with a purchase option by arrangement! Approx. 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS * Model: FARMSTAR – Agricultural Moving Floor Trailer * First registration: - (new vehicle) * Colour: Chassis RAL 9005, Body RAL 7001, Tarpaulin SIO 7500 * Capacity: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle lift axle + traction aid / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25 m * Suspension: Air suspension with raise and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer’s spec): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and rear left operating console * 21-board floor system, 6 mm ribbed * Welded aluminium end caps * Rear closure plate in aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue discharge wall with brushes and stainless steel handles * Front wall made of aluminium plank profiles * Service door in front wall * Side walls with smooth finish inside and out (grain specification), fully welded * Observation window on left rear side wall * Swing doors (50/50) * 4x locking rods * Swivelling cross member at the door closure * Hydraulic connections front with 3 m hoses and * Connection possibility under body without hoses * Pressure 1" female * Return 1" female * Operator’s platform with steps front left and right * Fifth wheel height: 1,150 mm * Single wheel mudguards * Heavy-duty landing legs Ncedpfjxl Ntuex Ahlow * Rolling tarpaulin (900g/m²) with quick-lock system * Foldable aluminium roof bows * Foldable aluminium rear light protection * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left * 1x aluminium step ladder, 2x 8-steps, mounted right * 1x extendable ladder at rear, right side * Smartboard * TPMS tyre pressure monitoring system * 5-chamber LED tail lights * 2x LED work lights in front of axles * 2x LED reversing lights rear * 1x LED work light, front wall interior * 2 x 3-function lamps installed in upper door cross member Purchase, rent, or rent with a purchase option by arrangement! Notice regarding possible errors in the listing: Despite careful creation of the listing, there may occasionally be errors in the text or details provided. We accept no liability for errors, changes, or prior sale. All information is without guarantee. Please contact us to verify details or for further inquiries.

Stanje: novo, največja dovoljena obremenitev: 28.240 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.820 mm, prostornina tovornega prostora: 91 m³, Oprema: ABS, Novo vozilo na zalogi – takoj na voljo! Možnost nakupa, najema ali po dogovoru najema z možnostjo odkupa! Stranska ponjava se lahko naknadno namesti za doplačilo! Stas 91 m² pomični pod / 10 mm raven pod / TÜV certifikat za natovarjanje ---- * Proizvajalec: Stas * Tip: BIOSTAR – pomični pod * Prva registracija: – (novo vozilo) * Barva: podvozje pocinkano, nadgradnja RAL 7016 sive barve, ponjava SIO 7340 * Prostornina: pribl. 91 m³ (13,50 m dolžina x 2,475 m širina x 2,64 m do 2,82 m višina) * Skupna masa: 36.000 kg * Lastna masa po prometnem dovoljenju: 7.760 kg * Nosilnost: 28.240 kg * Osi: 3x SAF osi / 1. dvižna os / pomoč pri speljevanju / kolutne zavore * Pnevmatske vzmeti: 385/65 R22.5 nove na Speedline Diamond aluminijastih platiščih * Medosna razdalja: 7,85 m * Vzmetenje: zračno ECAS z dvigom in spustom * ABS / EBS * Cargo Floor CF 500 SL-C dno z brezžičnim daljinskim upravljanjem in kontrolno omarico levo zadaj * 21 talnih desk, 10 mm ravne * 12 parov vgrajenih pritrdilnih obročev v tleh * Končne kape iz aluminija, varjene * Stena za popolno praznjenje z metlicami in ročaji iz nerjavnega jekla * Servisna vrata v čelni steni * Krilna vrata (50/50) z pnevmatskim zaklepom * 2x vpenjalna palica za zaklep * Končnik vratnega prečnika, vrtljiv * Hidravlični priključki spredaj s 3 m cevmi in * Možnost priklopa pod nadgradnjo brez cevi * Delovni podest z dostopom spredaj levo * Višina sedla: 1150 mm * Posamični blatniki * Polno obremenljive podporne noge * Aluminijasta zaščita luči zadaj (enoslojna, zložljiva) * Navijalna ponjava (900 g/m²) z napenjalnimi pasovi * Prečne jeklene ojačitve, zložljive in napenjalni trakovi v vzdolžni smeri * 1x orodjarna levo zadaj * 1x aluminijasta lestev, 3,80 m dolga * Tlačni manometer * Smartboard * TPMS nadzor tlaka v pnevmatikah * Aluminijasti odbijači zadaj * 1x izvlečna lestev zadaj desno * 2x LED delovna luč pred osmi * 2x LED vzvratna luč zadaj * 1x LED delovna luč v notranjosti čelne stene * 2 x 3-funkcijske luči zgoraj na prečniku vrat Njdpfjv Emk Uex Ahlecw Novo vozilo na zalogi – takoj na voljo! Možnost nakupa, najema ali po dogovoru najema z možnostjo odkupa! Opomba o morebitnih napakah v oglasu: Kljub skrbni pripravi oglasa se lahko v besedilu ali podatkih pojavijo posamezne napake. Za napačne podatke, spremembe ali predhodno prodajo ne prevzemamo nobene odgovornosti. Vse informacije so brez garancije. Prosimo, kontaktirajte nas za preverbo podrobnosti ali dodatna vprašanja.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 40 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle lift with traction aid and electric operation, raise & lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" king pin bolted into a 10mm plate, mechanical landing gear with single-side operation, braking system per EEC standard, Westinghouse two-line system, spring brakes on two axles and EBS electronic system Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per StVZO with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, Edbro hydraulic system with approx. 2m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on the tailgate, prepared for vibrating plate, mud-tight! ADDITIONAL EQUIPMENT AVAILABLE TO ORDER AS REQUESTED Nodpeu Dvw Esfx Ahljcw COLOR FREELY CHOOSABLE +590€ delivery costs *Pictures and offers non-binding*

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, traction aid, and electric operation, raising and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with unilateral operation, braking system according to EEC standards, two-line system, spring actuators acting on two axles, EBS electronic brake system by Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system in accordance with StVZO regulations, 2 five-chamber tail lights (Aspöck type), 24-volt system, aluminum tipper body, Edbro brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, continuous sealing rubber, spindle locks on the rear door; tipper body optionally also available with mud-tight seal! Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. FURTHER EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +€590 delivery costs Also available in versions Z9-Z13 Nsdsu Dvw Sopfx Ahlecw *Images and offers subject to change*

Stanje: novo, lastna masa: 7.900 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Knapen K100 new vehicle 92 m³ | 13 lashing rings | 10 mm floor | 900 g/m² sliding roof tarp | BPW axles | lift axle | 2x toolboxes | 2x work lights | 92 m³ | hydraulic connections on the support legs with thrust compensation | ladder on side underrun protection | Subject to errors, input mistakes, and prior sale. Njdpfjy Uk S Hsx Ahljcw

Stanje: rabljeno, prevoženi kilometri: 570.000 km, moč: 390 kW (530,25 KM), prva registracija: 10/2019, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: modra, vrsta prenosa: samodejen, Leto izdelave: 2019, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, DAF XF 530 SUPER SPACE CAB WITH WALKING FLOOR/TIPPING HYDRAULICS | ALCOA ALLOY WHEELS | STAS 2019, TOP CONDITION — VEHICLE HISTORY - German vehicle - Immediately ready for operation - Video available on request VEHICLE EQUIPMENT - Super Space Cab - Automatic transmission - Cruise control - Retarder - Adaptive cruise control - Lane keeping assist - Active brake system - Parking air conditioning - Auxiliary heater - Air conditioning - Refrigerator - Leather seats - Comfort seats - Seat heating - Seat ventilation - On-board computer - Hands-free system - Full air suspension - Full paneling - Roof spotlights - Alcoa alloy wheels - Walking floor/tipper hydraulics - Side underrun protection - Single fuel tank - Large AdBlue tank ADDITIONAL INFORMATION - Front tire size: 385/65 R22.5 - Rear tire size: 315/70 R22.5 - Very good tires - Vehicle immediately available NOTE - 4th cylinder is leaking water - Vehicle drives and runs without issues - Driving operation not impaired - Sale preferably to trade or for export --- STAS S300ZX WALKING FLOOR TRAILER 93 m³ — VEHICLE HISTORY - German vehicle - Immediately ready for operation - Very well maintained condition VEHICLE EQUIPMENT - First registration: 10/2019 - STAS walking floor trailer - Type: S300ZX - 93 m³ capacity - Walking floor system - Roll tarp - Disc brakes - ABS - Smartboard system - Remote control - Tire pressure monitoring system - Alcoa aluminium rims - Pallet box - Toolbox - 2x lift axles (1st and 3rd axle) - JOST axles ADDITIONAL INFORMATION - Tire size: 385/65 R22.5 - Perm. total weight: 36,000 kg - Unladen weight: 7,870 kg - Payload: 29,130 kg - All tires in good condition - Vehicle immediately available - Ready for immediate use ---- EXPORT / NOTICE Export sales only with deposit (min. €500 – €2,000) EXPORT SALES ONLY WITH DEPOSIT MIN. €500 – €2,000 Export declaration EXW possible in 10 minutes (approved exporter). Vehicle reservations only in writing. Verbal assurances are non-binding. Subject to change, errors, and prior sale. — LEGAL NOTICE — Ncedpezbfx Hofx Ahlow This advertisement does not constitute a binding offer in terms of §145 BGB. It serves only as an invitation to negotiate. All information provided without guarantee. No guaranteed features. Sale is subject exclusively to our General Terms and Conditions.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off-road, 3x9 t with air suspension, 1st axle lift with starting aid and electric control, lift and lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted to a 10 mm plate, mechanical landing gear with single-sided operation, brake system according to E.E.C. regulations, dual-line system, spring brakes acting on two axles and EBS electronic system by Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system according to German StVZO with 2 five-chamber tail lights (Aspöck type), 24 Volt system, aluminum dump body, Edbro hydraulic system with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber splash flaps, side underrun protection, rear underrun guard, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, body also available watertight on request! Nodpfjyh S Acox Ahlecw Combination tailgate split 2/3 - 1/3 with grain chute and automatic pneumatic locking. ADDITIONAL EQUIPMENT ALSO AVAILABLE ON REQUEST COLOR FREELY CHOOSABLE +590€ transfer costs Also available in Z9-Z13 variants Images and offers are non-binding.

Stanje: rabljeno, lastna masa: 7.820 kg, največja dovoljena obremenitev: 28.180 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2027, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.641 mm, skupna dolžina: 25.500 mm, skupna širina: 39.960 mm, skupna višina: 140.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, medosna razdalja: 7.850 mm, Leto izdelave: 2024, velikost sprednje pnevmatike: 385/65 R 22,5, velikost zadnje pnevmatike: 385/65 R 22,5, emisijski razred: noben, Proizvajalec osi SAF, aluminijasto šasi, barva siva, vzmetenje z zračnim sistemom (Air-Lift), funkcija dvigovanja in spuščanja, dvižna os 1. + 3. os, zavore – diskovne zavore, fiksna stranska zaščita, orodjarna omara, 2x LED vzvratne luči, 4 x LED vzvratne luči na boku (po 2 na podpornem nosilcu + 2 za osjo), 1 x LED žaromet v tovornem prostoru, držalo za metlo in lopato na stranski zaščiti na levi strani v smeri vožnje, nadzor CargoFloor, tip CF 500 SL-C - E"-CONTROL, 10 mm rebrasto z dodatnimi plastičnimi vodili pod profili tal, krilne vrata (1/2 - 1/2 z vzdolžnim nosilcem vrat), daljinski upravljalnik, zaščita zadnjih vrat – aluminijasti odbijač po celotni širini zadnje stene, palice in ponjava, vzdrževalna odprtina na levi strani spredaj, delovna ploščad z stopnicami, valjasta ponjava (PVC ponjava Panama kvalitete 900 g/m²), certifikat za pritrditev tovora DIN EN 12642, koda XL, proizvodnja, vzdrževalna vrata, hidravlične cevi, 2x3-komorne zadnje luči LED. Ncsdpfxozh Rano Ahljw

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, dolžina tovornega prostora: 13.555 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.660 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5 Dunlop SP 247, stanje pnevmatik: 100 odstotek, odmik od tal: 450 mm, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, NOVO – polpriklopnik s pomično dno (Reisch MOVE-R) – 92 m³ – pocinkan – popolna LED osvetlitev – takoj dobavljiv Novi polpriklopnik s pomičnim dnom Reisch MOVE-R 2026 predstavlja dosledno nadgradnjo sodobne tehnologije pomičnega poda (Moving Floor). Zahvaljujoč visoko trdnemu ogrodju iz jekla S700, pocinkani izvedbi in premišljeni aluminijasti konstrukciji vozilo združuje maksimalno stabilnost, majhno lastno težo in visoko ekonomičnost pri vsakodnevni uporabi. Poseben poudarek je na enostavnem vzdrževanju: privijačeni sestavni deli omogočajo hitra popravila in znatno zmanjšujejo čas izpada. V kombinaciji z zmogljivim sistemom Cargo-Floor ponuja Reisch MOVE-R zanesljivo in vzdržljivo rešitev za zahtevne transportne naloge. Podatki o vozilu • Stanje: novo, junij 2026 • Izdelek: Reisch Moving Floor-R • Modelno leto: 2026 • Dovoljena tehnična skupna masa: 39.000 kg • Lastna teža: 6.900 kg • Nakladalni volumen: 92 m³ • Širina vozila: 2.550 mm • Višina sedla: 1.150 mm • Notranja dolžina: 13.555 mm • Notranja širina: 2.480 mm • Notranja višina: 2.660 mm • Medosna razdalja: 1.310 mm Podvozje / šasija • Visoko trdni okvir iz jekla S700 • Pocinkan okvir za optimalno zaščito proti koroziji • Triaoosni SAF agregat z disk zavorami • 1. os dvigljiva os (samodejna, vključno z zagonsko pomočjo) • Pnevmatsko vzmetenje • KNORR EBS zavorni sistem • Aluminijasti zračni rezervoar (120 l) • Podporne noge SAF jeklo • Podvozna zaščita Reisch • Orodna skrinja (povečana) • Blatniki z blatnimi zavihki • TPMS sistem za nadzor tlaka v pnevmatikah Nadgradnja / sistem razkladanja • Aluminijasta nadgradnja v RAL 9006 (bela aluminijasta) • Bočne stene 3/2 mm • Prednja stena 2/2 mm • Cargo Floor CF500-SLC sistem pomičnega poda • 21 talnih profilov (6/112) Ncodpfszg Uxfox Ahlow • Daljinsko upravljanje + upravljalna omarica • Drsna stena z ročnim vračanjem • Zadnja vrata z ojačanimi tečaji • Pnevmatsko zaklepanje vrat Ponjava & dodatna oprema • PVC ponjava 900 g/m² • Barva ponjave: siva • Reisch nosilci ponjave (4 kosi) • Integriran svetlobni trak • Zunanji napenjalni trakovi za ponjavo Elektrika / razsvetljava • Popolni LED svetlobni sistem ERMAX • LED bočne označevalne luči • LED osvetlitev registrske tablice • Osvetlitev zadnjega portala, vključno z delovno in vzvratno lučjo • 4 LED delovni žarometi • Zložljiva zaščita zadnjih luči Dobava • Takoj dobavljivo – ogled možen vsak dan v 07368 Eliasbrunn • Dobava iz tovarne Reisch GmbH