Seppi M. H3 085 / Schlegelmulcher / 2-5To / Lagernd! / N nakup rabljenega (66.000)

Stanje: novo, delovna širina: 85.000 mm, For inquiries regarding the attachment, please contact Mr. Herden (by phone at ) Seppi M. H3 085 Mulcher / NEW / In stock & immediately available Price: €6,890.00 net / €8,199.10 gross - Working width: 85 cm Ndjdpfx Aeyi Ryxsb Hsa - Total width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg - Mulching head for mounting on a hydraulic arm - Mulches grass and brush up to 3 cm Ø - Suitable for excavators from 2 to 5 tons - Can be mounted to various adapter plates - Floating mounting (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motors, depending on the carrier’s flow capacity - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double-taper roller bearings, adjustable in height - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (Standard) - 9 pieces, part no. 150.02.041 OPT 428 Hydraulic gear motor 11 cm³ - With flow control valve and DRAIN SAFE TM motor safety valve to protect the motor in case of improper use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow rate in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with pressure accumulator (NO leakage oil line required!!) - Includes hoses and check valve Optional: MS03 adapter plate incl. bolts and installation = €530 net Requires 2 hydraulic lines: supply and return. No leakage oil! The unit is supplied without hoses or fittings. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Our warehouse holds a large selection of various Seppi M. products, all immediately available! Just contact us at / . Financing options are available upon request. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for DMS. We are an official sales and service partner for Westtech. We are an official sales and service partner for JCB construction equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. We are an official sales and service partner for Holp. We are an official sales and service partner for OilQuick. In addition, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer the complete Seppi M. range! Errors and prior sale excepted! = Further Information = Please contact Marius Herden for more information.

Stanje: novo, delovna širina: 105.000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. H3 105 Mulcher / NEW / In stock & immediately available Price: €6,490.00 net / €7,723.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes - Compatible with various adapter plates - Floating mount (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the carrier unit's flow rate - Housing made from wear-resistant AR400 steel - Front guard with chains - Rear guard made of rubber - Reinforced support roller with double-taper roller bearing, height adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pieces, part no. 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and DRAIN SAFE TM motor safety valve to protect the motor in case of improper use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 35 - 60 Optional: MS03 adapter plate including bolts and installation = €530.00 net Requires 3 hydraulic lines: pressure, return, and leakage oil. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. We have a wide selection of different Seppi M. products available in stock! Mr. Herden (phone ...) is happy to assist you. Financing options are available on request. We are an official distribution and service partner for: Ndjdpfx Abeyix Hms Hja - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Equipment - Mercedes-Benz - Iveco Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further information.

Stanje: novo, delovna širina: 85.000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. H3 085 direct / Flail Mower / Mulcher / NEW unit / in stock & immediately available Price: €6,690.00 net / €7,961.10 gross - Working width: 85 cm - Overall width: 102 cm - Depth: 80 cm - Height: 53 cm - Weight: 165 kg - Mulches grass and brush up to 3 cm diameter - For excavators from 2 to 5 tonnes - AR400: Housing made of high-strength, wear-resistant AR400 steel - Universal interface for mounting various adapter plates - FLOAR: Floating linkage (parallelogram guide) for ground contour adaptation - Direct drive without V-belt - Drive designed for hydraulic motor depending on flow rate - Housing made from wear-resistant steel - Front guard with chains - Rear guard with rubber - Height-adjustable support roller 133 mm Ø - Colour: anthracite RAL7021, red RAL3020 OPT 039 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMW flails (standard) - 9 pieces, spare part no. 150.02.041 OPT 428 PLUG & PLAY - Hydraulic gear motor 11 cm³ with flow control valve - Required hydraulic pressure in bar (min-max): 150 - 230 - Required hydraulic flow rate in l/min (min-max): 25 – 60 OPT 529 DRAINLESS system with accumulator (NO return line required!!) - (max. return pressure (T) 5 bar) 2 hydraulic lines required: supply and return. No leakage line needed! The unit is supplied without hoses and fittings. Optional: MS03 adapter plate incl. bolts and assembly = €530.00 net We have numerous other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Ndodpfjyix Hgox Ab Hea We keep a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Financing options are available upon request. We are official sales and service partners for Seppi M., Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Subject to errors and prior sale! = More information = Contact Marius Herden for further details.

Stanje: novo, delovna širina: 105.000 mm, For inquiries regarding the attachment, please contact Mr. Herden (Tel. available upon request). Seppi M. H3 105 Mulcher / incl. rotary drive / NEW / in stock & immediately available Price: €10,590.00 net / €12,602.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mower head for mounting on a hydraulic arm - Mulches grass and brushwood up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes - Designed for installation on various adapter plates - Floating mount (parallelogram guide) - Indirect V-belt drive with 3 belts - Drive designed for hydraulic motor, depending on the carrier’s oil flow rate - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection with rubber guard - Reinforced support roller with double tapered roller bearings, height-adjustable - Colour: red RAL3020, anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pcs, spare part no. 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - with flow control valve and DRAIN SAFE TM motor safety valve protects the motor in case of incorrect use - required hydraulic pressure in bar (min-max): 150 - 250 - required hydraulic flow in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with accumulator (NO leakage oil line required!) - includes hoses and check valve OPT 372 hydraulic 190° rotator Optional: MS03 adapter plate incl. interface flange, bolts and installation = €700 net Two hydraulic hoses are required: supply and return. No leakage oil line! An additional hydraulic circuit is needed for the slewing ring. The equipment is supplied without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products available from stock! Contact us for more details at / . Upon request, we are happy to provide you with a financing offer. We are official sales and service partner for Seppi M., Magni telehandlers, DMS, Westtech, JCB construction machinery, Mercedes-Benz, Iveco, Holp, and OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Nodpfx Aeyix Htsb Heda We supply you with the complete Seppi M. range! Subject to errors and prior sale! = Further information = Please contact Marius Herden for further information.

Stanje: novo, Leto izdelave: 2023, delovna širina: 105.000 mm, Seppi M. H3 105 – mulčnik z noži / DEMO – naprava / Letnik: 2023 / vključno z adapterjsko ploščo MS03 / na zalogi in takoj na voljo Cena: 10.790,00 € neto / 12.840,10 € bruto - Delovna širina: 105 cm - Skupna širina: 117 cm - Globina: 80 cm - Višina: 66 cm - Teža: 217 kg - Mulčnik za pritrditev na hidravlično roko - mulči travo in grmovje do 3 cm premera - za bagre od 2 do 5 ton - za pritrditev na različne adapterjske plošče - plavajoča pritrditev (vodilo v obliki paralelograma) - posreden pogon s ključnim jermenom z 3 ključnimi jermeni - pogon je predviden za hidravlični motor, odvisno od pretočne količine nosilne naprave - ohišje iz odpornega jekla AR400 Ndsdpjznrp Djfx Ab Hja - sprednja zaščita z verigami - zadnja zaščita iz gume - ojačani podporni valj z dvojnim stožčastim ležajem, nastavljiva višina - Barva: rdeča RAL3020 · antracit RAL7021 OPT 039 Rotor s SMW-nožem (standard) - 9 kosov, št. rezervnih delov 150.02.041 OPT 429 Hidravlični zobniški motor 17 cm³ - z ventilom za regulacijo pretoka in varnostnim ventilom motorja DRAIN SAFE TM, ki ščiti motor pred nepravilno uporabo - potreben hidravlični tlak v barih (min-max): 150 - 250 - potrebna hidravlična pretočna količina v l/min (min-max): 35 - 60 OPT 529 Sistem DRAINLESS z akumulatorjem tlaka (NI POTREBNA cev za uhajanje olja!!) - vključno s cevmi in povratnim ventilom OPT 372 hidr. 190° rotacijski mehanizem Potrebni sta 2 hidr. cevovoda: dovod in povratek. Brez uhajanja olja! Dodatno je potreben hidravlični krog za rotacijski obroč. Naprava je dobavljena brez cevi in priključkov. Številne druge adapterjske plošče (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / itd.) so na zalogi in takoj na voljo. Na našem skladišču imamo zelo široko izbiro različnih izdelkov podjetja Seppi M., ki so takoj na voljo! Za dodatne informacije se obrnite na nas preko . Po želji vam z veseljem pripravimo tudi ponudbo za financiranje. Smo uradni distributer in serviser podjetja Seppi M. Smo uradni distributer in serviser podjetja Magni Teleskoplader. Smo uradni distributer in serviser podjetja DMS. Smo uradni distributer in serviser podjetja Westtech. Smo uradni distributer in serviser podjetja JCB. Smo uradni distributer in serviser podjetja Mercedes-Benz. Smo uradni distributer in serviser podjetja Iveco. Smo uradni distributer in serviser podjetja Holp. Smo uradni distributer in serviser podjetja OilQuick. Poleg tega smo z 800 rabljenih vozil eden največjih trgovcev s tovornimi vozili v Nemčiji. Za vas dobavimo celoten program podjetja Seppi M.! Napake in predprodaja pridržane! = Dodatne informacije = Za dodatne informacije se obrnite na Mariusa Herdna.

Stanje: novo, delovna širina: 125.000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at [number]). Seppi M. H7 125 Flail Mulcher / incl. floating mounting / NEW device / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm diameter - For excavators from 5 to 15 tons - Universal interface for mounting various attachment plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: Low profile design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor according to carrier hydraulic output - 4D ROLLER: reinforced support roller, 152 mm diameter, with double cone roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front protection with chains - Rear protection made of rubber - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, spare part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min–max): 29 – 58 - Required hydraulic pressure in bar (min–max): 100 – 300 - Required hydraulic flow in l/min (min–max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) Njdjyix Haspfx Ab Hsda OPT 555 Pendulum Adapter 3 hydraulic lines required: pressure, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse holds a large selection of various Seppi M. products that are immediately available! Mr. Herden (Tel. [number]) will be happy to assist you. Financing quotes available on request. We are official sales and service partners for: - Westtech - OilQuick - Holp - Magni Telescopic Handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Equipment - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further Information = Intended use: Agriculture Contact Marius Herden for more information.

Stanje: rabljeno, prevoženi kilometri: 758.035 km, moč: 245 kW (333,11 KM), prva registracija: 10/1984, vrsta goriva: dizel, skupna masa: 16.000 kg, konfiguracija osi: 2 osi, barva: rumena, vrsta prenosa: mehanski, Leto izdelave: 1984, Oprema: žerjav, Tehnično v zelo dobrem stanju LIST LIST Nedpfxsyd S U Ts Ab Hoda

Stanje: rabljeno, Leto izdelave: 2024, delovna širina: 85.000 mm, For inquiries regarding the attachment, Mr. Herden is at your service (by phone). Seppi M. H3 085 / Flail Mulcher / Mulcher / incl. MS03 / DEMO unit / in stock & immediately available / Top condition! Price: €7,040.00 net / €8,377.60 gross The mulcher has only been used briefly once! - Working width: 85 cm - Overall width: 97 cm - Depth: 80 cm Ndedpfxjyklnts Ab Hja - Height: 66 cm - Weight: 181 kg Equipment: - incl. MS03 adapter plate - Mulching head for attachment to a hydraulic arm - Mulches grass and brushwood up to 3 cm Ø - For excavators from 2 to 5 tons - Suitable for mounting on various adapter plates - Floating linkage (parallelogram guide) - Indirect drive via three V-belts - Drive prepared for hydraulic motor depending on carrier’s oil flow - Housing made of wear-resistant AR400 steel - Front guard with chains - Rear guard made of rubber - Reinforced support roller with double tapered roller bearing, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pieces, part no. 150.02.041 OPT 428 Hydraulic gear motor 11cm³ - With flow control valve and DRAIN SAFE TM motor protection valve protects the motor in case of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with accumulator (NO leakage oil line required!!) - Including hoses and check valve 2 hydraulic lines required: supply and return. No leakage oil! Device is delivered without hoses or connectors. We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse we stock a very large selection of immediately available products by Seppi M.! Mr. Herden (phone: ) is happy to assist you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! Internal ref: 520013 = More information = Please contact Marius Herden for further information.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 4.250 kg, največja dovoljena obremenitev: 14.750 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 03/2017, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.000 mm, skupna dolžina: 7.150 mm, skupna širina: 2.550 mm, skupna višina: 2.600 mm, vzmetenje: zrak, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2017, Oprema: ABS, NA VOLJO TAKOJ!!! DOBRO STANJE!!! Njdpfx Ajy N Aitsb Hoda SCHWARZMÜLLER, serija M, prikolica s tremi stranicami za samovozni prenos, tandem osi Neto izvozna cena: 13.500 EUR

Stanje: novo, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher attachment for excavators - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches brush and wood up to 10 cm in diameter - For excavators from 5 to 10 tonnes - For mounting on various adapter plates - Drive designed for hydraulic motor depending on the carrier unit’s flow rate - Indirect V-belt drive with 5 belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Chain front guard - Chain rear guard - Height-adjustable skid runners, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial-piston hydraulic motor with variable displacement 22 – 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 – 45 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required hydraulic flow rate in l/min (min-max): 40 – 100 Intermediate adapter for BE314 Z1 - Approx. 200 mm high - Not required when using OPT 372 hydraulic 190° rotator Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net An independent hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is additionally required for the hydraulic hood. The unit is supplied without hoses, fittings, or adapter plate. Mr. Herden (phone) will be happy to assist you. Financing options available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. Ndjdoyltvnepfx Ab Hea We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We offer you the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Stanje: rabljeno, Leto izdelave: 2020, FLIEGL SDS350 15 metrov X-TRA DOLGA RAVNA kontejnerska šasija za 2 izmenljivi nadgradnji ali 2 kontejnerja !EKSTRA DOLG! !! Dolžina 14,85 m!! Ndjdpswtbvtsfx Ab Hsa • Pripravljeno za 2 x 7,45 m nadgradnji • ali 2 x 20-ft kontejnerja • ravno šasijo • 3 x SAF zračno vzmetene osi, vsaka 8 t • Dvigalo/spuščanje • ABS • ASR Mere in teža vozila: • Dovoljena skupna masa: 35.000 kg • Lastna teža: 4.100 kg • Mere: 14.850 x 2.550 x 1.200 mm • Pnevmatske gume: 385/55 R22.5 • Globina profila: 13/13/11/12/12/9 mm - zelo dobro stanje, skoraj ni bil v uporabi! - Tehnični pregled / HU / SP: NOVO! - SP: 01/26 - Nemška polprikolica! - Prvi lastnik Pridržujemo si pravico do napak in vmesne prodaje! = Dodatne informacije = Letnik: 2020 Za več informacij kontaktirajte Joannis Arpantzanis ali Kai Bühler.

Stanje: novo, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / in stock & immediately available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Overall width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavator mounting, suitable for mulching along riverbanks, in forests, along railway lines, and in other hard-to-access areas - Mulches brush and wood up to 20 cm diameter - Suitable for excavators from 10 to 20 tonnes - For mounting on various adapter plates - Drive suitable for hydraulic motor, depending on carrier flow rate - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over full hood length - Front guard with chains - Rear guard with chains - Adjustable skid shoes, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts) - 27 pcs, spare part number 176.02.005 OPT 465 M-BOOST axial piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min Intermediary adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is additionally required for the hydraulic hood. The device is supplied without hoses, couplings, or adapter plate. We have a very wide range of different Seppi M. products available in our warehouse for immediate delivery! Nedjyltwfspfx Ab Heda Mr. Herden (by phone) will be happy to assist you. On request, we will gladly provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = Contact Marius Herden for more information.

Stanje: novo, For inquiries about the attachment, Mr. Herden (by phone) will be happy to assist you. Seppi M. BMS 125 Forestry Mulcher / NEW / In Stock & Immediately Available Price: €30,690.00 net / €36,521.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulcher for excavator attachment - Ideal for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches brush and wood up to 30 cm Ø - For excavators from 13 to 30 t - Compatible with various mounting plates - Drive designed for hydraulic motor depending on the carrier machine's hydraulic flow - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Sandwich-design skid shoes, height adjustable, reinforced with carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 - Wear-resistant tool mounting - Interchangeable rotor shaft stubs OPT 465 M-BOOST Swashplate Piston Motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 80 - 170 l/min Three hydraulic lines required: supply, return, and case drain. The unit is supplied without hoses, couplings, and mounting plate. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of various Seppi M. products available from stock! Mr. Herden (tel.) will be happy to assist you. On request, we are happy to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! = Further information = Nodpfx Aboyii Tzj Hjda Please contact Marius Herden for further information.

Stanje: novo, delovna širina: 1.250 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating attachment / NEW machine / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - Mulches grass and light brush up to 7 cm Ø - For excavators from 5 to 15 tonnes - Universal interface for mounting various attachment plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect belt drive with 4 V-belts - Drive prepared for hydraulic motor depending on the carrier's hydraulic flow - 4D ROLLER: reinforced support roller, 152 mm Ø, with double taper roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front protection with chains - Rear protection made of rubber - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, spare part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement, 29-58 cm³, and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow in l/min (min-max): 55 – 150 OPT 099 Floating attachment (parallelogram linkage) OPT 555 Pendulum adapter OPT 372 Hydraulic 190° rotation device Three hydraulic lines required: pressure, return, and drain line. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (Tel.) will be happy to assist you. We are happy to provide you with a financing offer upon request. We are an official sales and service partner for Westtech. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Holp. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for DMS. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Nodpfsy E Etysx Ab Hjda Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further information.

Stanje: skoraj kot novo (rabljeno), Električni viličar 2t Triplex 6m steber Stranski pomik Letnik 12/2024 samo 31h • Znamka/Model: MY20 • Letnik: 12/2024 • Obratovalne ure: samo 31,3 ur • Nosilnost: 2.000 kg (2 toni) • Dvižni steber: Triplex steber, dvižna višina 6.000 mm • Oprema: hidravlični stranski pomik • Stanje: praktično kot novo, takoj pripravljeno za uporabo • XXL baterija & polnilec: priložena Idealno za skladišča, logistiko ali gradbena podjetja Zelo malo uporabljen → skoraj kot nov Takoj na voljo Ndedpfx Aex Uqpxeb Hja

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, številka stroja/vozila: 2451868, nosilnost: 750 kg, dvižna višina: 26.200 mm, dolžina platforme: 5.600 mm, širina platforme: 1.300 mm, skupna masa: 18.770 kg, transportna dolžina: 5.600 mm, transportna širina: 1.320 mm, transportna višina: 4.100 mm, vrsta goriva: električni, barva: modra, Oprema: pogon na vsa štiri kolesa, zapora diferenciala, Tehnični podatki - Letnik: 2007 - Pogon: Električni 4WD - Višina delovne platforme: 28,20 m - Višina platforme: 26,20 m - Podaljšek platforme: 2,20 m - Nosilnost: 750 kg - Dimenzije platforme (D x Š): 5,60 x 1,32 m - Celotne dimenzije (D x Š x V): 5,60 m x 1,32 m x 4,10 m Njdpfx Abjyaymcj Heda - Skupna teža: 18.770 kg - Nosilnost: 750 kg - Hitrost vožnje: 0,5 – 2,3 km/h - Največji nagib: 25 % Štirikolesni pogon, štirikolesno krmiljenje, zložljivo ograjno ograjo, v popolnem delovnem stanju, splošne sledi uporabe.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 7.710 h, Purpose of use: Construction Unladen weight: 1,865 kg Engine brand: Deutz TCD 2012LO4 Nsdpfxjytw Aue Ab Hoda Throughput: 11.1 m³/min Working pressure: 7 bar Please contact the Sales Department for further information.

Stanje: novo, For inquiries regarding the attachment, please contact Mr. Herden (Tel. ...). Seppi M. BMS-F 125 Forestry Mulcher / incl. hydraulic rotator / NEW / in stock & immediately available Price: €28,390.00 net / €33,784.10 gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulcher for excavator mounting, designed for mulching along riverbanks, in forests, alongside railways, and in other hard-to-reach areas - Mulches brush and wood up to 20 cm Ø - Suitable for excavators from 10 to 20 tons - Mountable to various adapter plates - Drive designed for hydraulic motor, depending on the carrier’s hydraulic flow rate - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid shoes, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pcs, part no. 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 100 - 150 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening rear hood For operation, an independent hydraulic power unit is recommended. 3 hydraulic lines are required for the rotor: supply, return, and drain line. The attachment is supplied without hoses, connectors, and mounting plate. We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Ndedpfsyii T Iex Ab Hja We also have a large selection of various Seppi M. products available from stock! Mr. Herden (Tel. ...) will be happy to assist you. On request, we can also provide you with a financing offer. We are an official sales and service partner for: - Magni telescopic handlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Westtech - JCB construction equipment - Mercedes-Benz - Iveco With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. Unladen weight: 780 kg Please contact Marius Herden for further information...

Stanje: rabljeno, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2007, dolžina tovornega prostora: 7.450 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1.480 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, skupna višina: 3.250 mm, Oprema: ABS, Številka vozila: VAVSAK2357H250376 DE HU 07.2026 - SP 01.2027 Lastna teža: 5.650 kg Dimenzije korita: 7.450 x 2.330 x 1.480 mm Prostornina: pribl. 24 m³ Osnovni sklop BPW Eco Plus z bobnastimi zavorami Podporne noge, nastavljive z ročico Notranja nihajna loputa Nakladalna žlica Platforma Nastavljiva zaščita proti podiranju Njdpfx Ajzm Dm Sjb Hoda Pnevmatike: 385/65 R 22,5 Pridržujemo si pravico do sprememb, prodaje predhodno in morebitnih napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v pravnem smislu pri prodaji. Odločilna je opis, naveden v pogodbi o prodaji. Naša ponudba na splošno ne vključuje novega tehničnega pregleda. Če je nov tehnični pregled zaželen, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko opremljeno z reklamami in/ali oznakami. Veljajo naši splošni pogoji dostave in plačila.

Stanje: rabljeno, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2008, dolžina tovornega prostora: 7.400 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1.470 mm, prostornina tovornega prostora: 24 m³, skupna širina: 2.550 mm, skupna višina: 3.250 mm, Oprema: ABS, Številka vozila: VAVSAK2358H274814 DE HU 11.2026 – SP 05.2027 Lastna teža: 5.600 kg Mere korita: 7.400 x 2.330 x 1.470 mm Prostornina: približno 24 m³ BPW Eco Plus osi s bobnastimi zavorami Podporna noga, nastavljiva z ročico Notranja nihajna loputa Nakladalna ramapa Ploščad Nastavljiva zaščita proti podiranju Ndsdpfx Abszm Dnvj Hja Pnevmatike: 385/65 R 22,5 Pridržujemo si pravico do sprememb, vmesne prodaje in morebitnih napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v pravnem smislu kupoprodajne pogodbe. Odločilna je opas v skladu s kupoprodajno pogodbo. Naša ponudba na splošno ne vključuje novega tehničnega pregleda (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih servisnih centrov! Vozilo je lahko opremljeno z reklamami in/ali napisom. Veljajo naši splošni pogoji dostave in plačila.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 4.950 h, Intended use: Construction Unladen weight: 1,865 kg Engine brand: Deutz TCD2012 LO4 Throughput: 9.5 m³/m Operating pressure: 10 bar Please contact the Sales Department for further information. Nsdpfeytw Anjx Ab Hoda

Stanje: rabljeno, prva registracija: 03/2016, Leto izdelave: 2016, SCHWARZMÜLLER 3-osna prikolica HARDOX SANH, 25 m³, 2 x dvižna os! • Diskovne zavore • ABS • Zračna vzmetenje • 2 dvižni osi (1. in 3. os) • 3 zračno vzmetene 9-tonske osi SAF • Naprava za dvigovanje/spuščanje • Zavora za asfaltersko mešanico • Približno 25 m³ prostornine • Platforma • Škatla za orodje • Velikost pnevmatik: 385/65 R22.5 na jeklenih platiščih • Globina profila: 6/7/6/9/5/5 mm • ALCOA – platišča • Dovoljena masa: 36.000 kg – (tehnično možno 39.000 kg!) • Lastna masa: 6.230 kg Ndedpozuvyysfx Ab Hea - Prvi lastnik - nemška prikolica - Tehnični pregled: /2026 – na zahtevo in po dogovoru: nov! Pridržujemo si pravico do sprememb in napak!

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 4.935 h, Namen uporabe: Gradbeništvo Lastna teža: 1.975 kg Znamka motorja: Deutz TCD2012 L04 2V Pretok: 11,1 m³/m Dimenzije tovornega prostora: 430 x 177 x 152 cm Tip kompresorja: Vijačni kompresorji Delovni tlak: 7 bar Nodpfx Abjytw Azj Hsda Za dodatne informacije se obrnite na prodajni oddelek.

Stanje: rabljeno, največja dovoljena obremenitev: 9.980 kg, skupna masa: 13.500 kg, prva registracija: 08/2012, dolžina tovornega prostora: 7.310 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.528 mm, prostornina tovornega prostora: 46 m³, Leto izdelave: 2012, Oprema: ABS, * TANG 2-OSNI TANDEM-PRIKLOPNIK S TOVORNO PLATFORMO/PONJAVO, dolžina 7,30 m * STRANSKA PONJAVA desna + leva & PLATNENA NADSTREŠKA EDSCHA * Visoko spojen * Dovoljena skupna masa 13.500 kg = nosilnost cca 9.980 kg * Številka vozila za povpraševanja strank: 4756 * Zračno vzmetenje * EBS * Sistem proti blokiranju koles (ABS) Ndsdszmbnyjpfx Ab Hea * Pnevmatike 285 70 R 19,5 * Visoko spojen * Os BPW * Kolutne zavore * Tehnični pregled/pregled izpušnih plinov – opravljen! Brez odgovornosti za tiskarske in prepisovalne napake. Prodaja samo podjetjem. Pridržana pravica do spremembe in napake. * VRHUNSKI SERVIS + KAKOVOST * Z veseljem vam bomo pripravili ponudbo za LIZING, FINANCIRANJE ali KUPOPRODAJO. * Garantno zavarovanje je možno na zahtevo pri zavarovalnici. * TÜV / UVV LBW / Preverjanje tahografa in vgradnja OBU naprave pri naših partnerjih na lokaciji. * Carinske tablice za 30 dni. * Vse potrebne carinske dokumente za izvoz lahko zagotovimo, vendar jih je treba naročiti posebej. * Cestnina za Toll-Collect lahko rezervirate pri nas. * Brezplačen prevoz z letališča Stuttgart ali železniške postaje Metzingen (Württemberg). * ŽELEZNIŠKA POSTAJA ZA PRIHOD: 72555 METZINGEN/WÜRTT. * ZA ANGLEŠČINO: Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp številka: * * ---- Obiščite nas na naši spletni strani: * Nenehno več kot 200 vozil na zalogi.

Stanje: rabljeno, Leto izdelave: 2023, For inquiries regarding the attachment, Mr. Herden will assist you (via phone). Seppi M. MINI-BMS 105 / 5-10t / Forestry Mulcher / CUT CONTROL / DEMO unit / Year of manufacture: 2023 / in stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - Suitable for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm Ø - For excavators from 5-10 tonnes - Can be mounted with various attachment plates - Drive designed for hydraulic motor, depending on carrier’s output - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front protection with chains - Rear protection with chains - Adjustable skid runners, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - approx. 200 mm high Optional: MS08 adapter plate including bolts and installation = €1,410.00 net We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. For operation, an autonomous hydraulic system is recommended. Three hydraulic lines are required: feed, return, and drain. Additionally, a double-acting hydraulic connection is necessary for the hydraulic hood. The unit is supplied without hoses, fittings, and mounting plate. Financing options available upon request. Ndedpfx Ajyltv Ujb Hsa We are official sales and service partners of Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. Furthermore, with 800 used vehicles, we are one of Germany’s largest commercial vehicle dealers. We supply the complete Seppi M. range! Subject to errors and prior sale! Internal No.: 170048 Please contact Marius Herden for further information.