Kässbohrer Slar3 Tele Tiefbett Radmulden Metallisiert nakup rabljenega (1.990)

Stanje: novo, največja dovoljena obremenitev: 29.260 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer SLAR3 Extendable Lowloader with Wheel Wells Technical Specifications: Model and Manufacturer: * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable low-bed trailer with wheel recesses, suitable for transporting vehicles and heavy machinery. Dimensions: * Total length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm through side extensions) * Saddle height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capabilities: * Permissible total weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Dead weight: 12,744 kg ±3% * Axle capacity: 30,000 kg (10 tonnes per axle) * King pin capacity: 18,000 kg Axle Equipment: Bedsx Epaqjpfx Ak Aslk * Number of axles: 3 (2 fixed front axles, 1 rear steering axle) * Lifting axle: Manually load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Rims: * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre markings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre lifespan * Number of rims: 12 pieces (steel rims, offset ET120) Chassis and Suspension: * Suspension: Air suspension with load gauge * Braking system: Dual-line compressed air brake system by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics: * Lighting system: 24V, multi-chamber lights by ASPÖCK, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connections * Connectors: NATO socket with 2 x 50mm² intermediate cables (3 m length) Ramps: * Ramp type: Foldable hydraulic loading ramps with sliding mechanism * Capacity: 40 tonnes * Ramp surface: Hardwood * Safety: Ramp protection chain included Load Securing: * Lashing rings: - 2 x 2 with 5,000 daN capacity each - 1 x 2 with 10,000 daN capacity on the gooseneck - 4 x 2 lashing rings with 6,000 daN capacity in the well area * Container locks: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features: * Gooseneck: With 90° vertical corners, stable and durable * Floor: 45 mm thick hardwood and steel floor with anti-slip (droplet) structure * Wheel well bridge: Segmental hardwood bridges with sheet metal supports for closing the wheel wells * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours: * Chassis: Traffic red (RAL 3020) / also available in black * Partial metallization of the contact surfaces Condition: New and immediately operational. * Perfectly suited for heavy transport and use in construction or machinery relocation.

Stanje: novo, največja dovoljena obremenitev: 29.260 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Technical Data: Model and Manufacturer - Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 - Manufacturer: Kässbohrer - Type: Extendable low-bed semi-trailer with excavator recesses, suitable for transporting vehicles and heavy machinery. Dimensions - Overall length: 13,190 mm - Gooseneck length: 3,950 mm - Platform length: 9,240 mm - Extension: 3,500 mm (pe) - Total width: 2,550 mm (expandable by 600 mm with side extensions) - Fifth wheel height: 1,250 mm - Platform height: 875 mm Bedpfx Aeu Tarpok Ajlk - Ramp length: 2,750 mm - Ramp width: 850 mm - Wheelbase: 7,800 mm - Axle distance: 2,260 mm Weights and Load Capacities - Permissible gross weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h - Tare weight: 12,744 kg ±3% - Axle load capacity: 30,000 kg (10 tonnes per axle) - King pin load capacity: 18,000 kg Axle Equipment - Number of axles: 3 (2 rigid at front, 1 trailing axle at the rear) - Lift axle: Manually raiseable depending on load (1st axle) - Axle material: BPW axles with drum brakes Tyres and Rims - Tyre size: 245/70 R17.5 - Tyre brand: GOODYEAR - Tyre markings: M+S label and 3PMSF marking - Tyre pressure monitoring system: Increases fuel efficiency and tyre life - Number of rims: 12 units (steel rims with offset ET120) Chassis and Suspension - Suspension: Air suspension with load gauge - Braking system: Dual-circuit air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics - Lighting system: 24V, multi-chamber lights from ASPÖCK, LED side marker and rear lights - Coupling type: Standard yellow/red for air supply connection - Electrical connectors: NATO socket with 2 x 50mm² interconnection cables (3 m long) Ramps - Type: Foldable hydraulic loading ramps with sliding mechanism - Capacity: 40 tonnes - Ramp surface: Hardwood - Safety: Ramp protection tension chain included Load Securing - Lashing rings: - 2 x 2 lashing rings, each 5,000 daN capacity - 1 x 2 lashing rings, 10,000 daN capacity on gooseneck - 4 x 2 lashing rings, 6,000 daN capacity in the low bed area - Container lock housing: Suitable for transportation of 1 x 20 FT or 1 x 30 FT containers - Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features - Gooseneck: With 90° vertical corners, stable and durable - Floor: 45 mm thick hardwood floor and steel floor with chequer plate structure - Excavator recess bridge: Bridge consists of hardwood planks with steel supports to cover wheel recesses - Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Paintwork - Chassis: Traffic red (RAL 3020) - Partial metallization of the loading areas Condition: New and ready for immediate use. - Perfectly suited for heavy hauling and use in construction or machinery relocation.

Stanje: novo, največja dovoljena obremenitev: 43.929 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 16.690 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader Extendable with Wheel Wells (NEW) Equipment & Highlights Technology & Superstructure Bsdpfxex Efzne Ak Aelk Extendable low loader with wheel wells * External length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension * Platform height: only 875 mm for low loading height * Overall width: 2,550 mm + 600 mm extension * Unladen weight: approx. 14,071 kg * Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles 4 BPW axles, front 2 fixed, rear 2 trailing axles * Lift axle (automatic + manual) * Air suspension with load gauge * WABCO EBS 4S/3M, ABS & RSS * WABCO Smartboard (axle load, suspension, diagnostics) * 16x tyres 245/70 R17.5 (M+S + 3PMSF) * Tyre pressure monitoring according to R141 Ramps & Loading Area Foldable 40-ton ramps * Ramp length 2,750 mm, 850 mm width * Hydraulic sliding system * 45 mm hardwood floor + steel chequer plate over wheel arches * Wheel wells + cover plates included * Excavator arm recess at rear Load Securing Comprehensive lash points: * 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck * 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform * 8,000–10,000 daN on outer frame / well area * 5×2 stake pockets, removable stakes 50×100 mm * Container locks for 1×20 ft or 1×30 ft Equipment & Comfort 1× Toolbox (700×400×360 mm) * Stake box * Beacon * LED side lighting, LED work lights * Wheel chocks * Extension boards with LED * Standard 2" kingpin * Metallized chassis (Zn/Al 85/15) – high corrosion protection * Colour: RAL 9005 Black Special Features New & immediately available * High payload, extremely versatile * Perfect for machinery transport, construction equipment, vehicles, etc. * Very robust construction, premium BPW components We are happy to provide further information upon request.

Stanje: novo, največja dovoljena obremenitev: 43.929 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 16.690 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Extendable Low Loader with Wheel Wells (NEW) ----Equipment & Highlights Technology & Structure - Extendable low loader with wheel wells - External length: 13,190 mm, platform 9,240 mm + 3,500 mm extension - Platform height only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight: approx. 14,071 kg - Permissible total weight: 58,000 kg (at 80 km/h) / 63,800 kg (at 60 km/h) Chassis & Axles - 4 BPW axles: front 2 fixed, rear 2 trailing axles - Lift axle (automatic & manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tires 245/70 R17.5 (M+S & 3PMSF) - Tire pressure monitoring according to R141 Ramps & Loading Area - Foldable 40-ton ramps - Ramp length 2,750 mm, width 850 mm - Hydraulic sliding system - 45 mm hardwood floor plus steel durbar plate over wheel arches - Wheel wells and cover bridges included - Digger arm recess at rear Load Securing - Comprehensive lashing points: * 2×2 lashing rings (5,000 daN) & 1×2 lashing rings (10,000 daN) on the gooseneck * 3×2 lashing rings (5,000 daN) & 4×2 lashing rings (10,000 daN) on the platform * 8,000–10,000 daN on the outer frame / well area * 5×2 stake pockets, plug-in stanchions 50×100 mm * Container locks for 1×20 ft or 1×30 ft container Features & Comfort - 1× toolbox (700×400×360 mm) - Stanchion box - Beacon - LED side lights, LED work lights - Wheel chocks Bljdjx Ix Rqepfx Ak Aek - Extension boards with LED - Standard 2" king pin - Metallized chassis (Zn/Al 85/15) for superior corrosion protection - Color: red ----Special Features - New & available immediately - High payload, extremely versatile - Perfect for machine transport, construction machinery, vehicles, etc. - Extremely robust construction, premium BPW components For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 37.581 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Locking position for extension: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tons - Total width: 2,550 mm - Technical gross weight (80 km/h): 48,000 kg - Technical gross weight (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2x fixed axles at the front, 1x trailing steering axle at the rear - Air suspension with load gauge - Wabco braking system - Tyres: 12 units, size 245/70 R17.5 Bledpemtwypsfx Ak Ask CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions, extendable up to 300 mm - Telescopic rear stabilizer with 50 ton capacity - Rear mechanical folding supports with 45 ton capacity - Wheel recesses dimensions: 420 mm deep, 800 mm wide - Suitable for tyre diameter up to 1,800 mm RAMP: - Ramp receptacles at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft, 1x40 ft, or 1x45 ft + 4 twist locks - Front wall made of steel, height 1,500 mm, Code XL certified ACCESSORIES: - 1x plastic toolbox - Stake box with capacity for 18 stakes - 1x rotating beacon - Wheel recess bridge for closing the recesses Chassis colour: RAL 3020 Traffic Red For further information, we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 37.581 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Factory-new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Extension locking position: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tonnes - Overall width: 2,550 mm - Gross vehicle weight rating (80 km/h): 48,000 kg - Gross vehicle weight rating (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2 rigid front axles, 1 self-steering rear axle - Air suspension incl. load gauge - Wabco braking system - Tyres: 12 x 245/70 R17.5 CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions extendable up to 300 mm - Telescopic rear support winder, 50-ton capacity - Mechanically folding supports at rear, 45-ton capacity - Wheel recesses: 420 mm deep, 800 mm wide; suitable for tyre diameter up to 1,800 mm Bsdpetn Hlmsfx Ak Aolk RAMPS: - Ramp mounts at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft, 1x40 ft, or 1x45 ft + 4 twist locks - Front wall made of steel, height 1,500 mm, with Code-XL certificate ACCESSORIES: - 1x plastic toolbox - Stake box for 18 stakes - 1x beacon - Wheel recess bridge to close the wheel recesses - Ramp box Chassis colour: Nova grey For further information, please feel free to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 35.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 870 mm, Leto izdelave: 2025, Oprema: ABS, KÄSSBOHRER 3-osni nizkoposredni priklopnik s teleskopsko podaljškom, z utori za kolesa Prva registracija Višina priklopne glave: 1.200 do 1.300 mm Dolžina gosi: 3.950 mm Dolžina nizkoposrednega dela: 9.240 mm Teleskopska podaljšek: 3.500 mm, raztegljiv v korakih po 500 mm Višina nizkoposrednega dela brez obremenitve: 870 mm Največja obremenitev priklopne glave: 18.000 kg Tehnično možna skupna masa pri 80 km/h: 48.000 kg Tehnično možna skupna masa pri 60 km/h: 52.800 kg Lastna teža: 12.500 kg BPW osi s bobnastimi zavorami 1. os: dvižna os 3. os: sledilno krmiljenje WABCO priklopniška EBS s sistemom RSS za stabilnost Pnevmatike: 12-krat 245/70 R 22,5 Nadzor tlaka v pnevmatikah Električna hidravlika, 24 V Nizkoposredni del z desko iz trdega lesa, 45 mm Komplet za povečano širino: 3.000 mm, vključno z podaljški 4x utori za kolesa s pokrovi za prevoz 1-delna dolga rampa, dolžina 3.040 mm, širina rampe 850 mm LaSi: Sidrne točke na gosi: Blodpfxjzng Syj Ak Aek 2 para, 5.000 kg 1 par, 10.000 kg Sidrne točke na nizkoposrednem delu: 3 pare, 5.000 kg 4 pare, 10.000 kg 2 para, 8.000 kg 4 pare, 6.000 kg 6x posode za pritrditev kontejnerjev za prevoz 1x 20 FT ali 1x 30 FT kontejner 5 parov žepov za okvir na zunanjem okvirju (52 x 102 m) V odličnem in dobro vzdrževanem stanju NAJEM je nova oblika NAKUPA, pri nas je na voljo tudi najem s celovito storitvijo.

Stanje: rabljeno, največja dovoljena obremenitev: 21.130 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 11/2026, skupna širina: 2.540 mm, skupna višina: 1.980 mm, Oprema: ABS, Kässbohrer SLL 2-axle lowbed with hydraulic steering Manufacturer: Kässbohrer Model / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed semi-trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Overall width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40/60/80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional ride height increase of 40 mm possible * Load gauge for axle load display * Semi-automatic axle alignment with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Braking system in accordance with UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED rear and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED rotating beacon (1 unit) Tyres & Wheels * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system as per R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on gooseneck Steering & Controls * Hydraulic steering on both axles * Control panel in vehicle * Radio remote control for external steering control * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallisation (85% zinc / 15% aluminium) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood flooring * Each platform: 100 × 1,300 × 2,115 mm * Weight per platform: 225 kg * Each platform with 2 × lashing rings (8,000 kg pull force) * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Load Securing * Lashing rings: * 1 × 2 units 13.4 t at gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform * Stake pockets: * 6 × 2 units in pool (50 × 100 mm) * 3 × 2 units at rear (50 × 100 mm) Body Components & Accessories * Aluminium front panel on gooseneck: 360 × 1,550 mm Bsdpfxeynprws Ak Ajlk * Aluminium side panels: 360 × 1,900 mm * Aluminium rear panel: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning signs (423 × 423 mm, up to 1,000 mm) * Yellow side reflector band * Red rear reflector band For further information, please contact us.

Stanje: novo, največja dovoljena obremenitev: 35.450 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.740 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low loader with wheel wells Registration country: Germany Year of manufacture: 2026 Bjdpfx Akjyrkpxo Aelk Color: RAL 3020 Traffic Red ----Technical Data Dimensions * External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Total width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights * Tare weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity: 8,000 kg per axle * King pin load capacity: 15,000 kg ----Chassis / Axles * 3 BPW axles * Air suspension * 2 rigid front axles * 1 trailing rear axle * Lifting axle on 1st axle (load-dependent) * Automatic axle lifting control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics * WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting as per ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tires * Tire size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tires * 3PMSF winter tires * Tire pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure * High strength S700 MC steel chassis * 2" king pin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Platform / Extensions * Side extension up to 300 mm * 100x100 box profile pockets * Galvanized steel extensions * Hardwood extension boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough * Wheel wells for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps * Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp floor made of hardwood * Ramp securing with tension chain ----Load Securing Lashing points: * Gooseneck: 2 × 2 pcs 5 t, 1 × 2 pcs 10 t * Outer platform: 3 × 2 pcs 5 t, 4 × 2 pcs 10 t * Below outer frame: 2 × 2 pcs 8 t * Platform: 4 × 2 pcs 6 t * Further securing: * 5 × 2 stake pockets * 3 × 2 stake row pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories * Toolbox (700 × 400 × 360 mm) * Rotating beacon * Rear work light * Extendable warning panels with LED * Side marking tape * Rear marking tape * Wheel chocks * WABCO Smartboard * Power cable (NATO socket) For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 34.815 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer SPA Mega Extendable HD Platform Trailer Immediately Available TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm platform extension - Extension locking positions: 500 mm intervals - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Overall width: 2,550 mm - Gross technical weight (80 km/h): 45,000 kg - Gross technical weight (60 km/h): 46,000 kg - Unladen weight: 10,185 kg CHASSIS: - BPW axles with air suspension and disc brakes - 2x rigid front axles, 1x rear trailing steering axle - Air suspension including load gauge - 1st axle liftable - Wabco braking system - Tyres: 445/45 R19.5 - 1x spare wheel carrier FRAME: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm hardwood floor - 8x2 extendable side extensions up to 300 mm - Telescopic support winch at front with 50t capacity - Mechanically folding rear supports with 45t capacity RAMPS: - Provisions for ramps at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets Bljdpfxel N Syve Ak Aek - Container locks suitable for 1x20 ft, 2x20 ft, 1x40 ft, 1x45 ft - Steel front wall, 1,700 mm high, with Code-XL certificate ACCESSORIES: - 1x stainless steel toolbox - Stake holder at front wall - 2 x 2 oversize signs with LED lighting - Rotating beacon Chassis colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Stanje: novo, največja dovoljena obremenitev: 35.442 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 16.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.350 mm, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Kässbohrer Maxima extendable tele HD platform semi-trailer Immediately available TECHNICAL INFORMATION: * Coupling height: 1,250 mm * External length: 13,535 mm * Gooseneck length: 4,285 mm * Platform length: 9,100 mm * Extension: Up to 7,450 mm platform extension Bljdpfx Aelz Hlijk Ajk * Extension locking position: 500 mm * Gooseneck height: 180 mm * Wheelbase: 8,130 mm * Axle spacing between 1st and 2nd axle: 1,360 mm * Axle spacing between 2nd and 3rd axle: 1,810 mm * Axle load: 9 tonnes technical load capacity * Axle load total: 27,000 kg * King pin capacity: 18,000 kg technical king pin capacity * Total width: 2,540 mm * GVW (at 80 km/h): 45,000 kg * GVW (at 60 km/h): 46,000 kg * Tare weight ±3%: approx. 9,558 kg * Swing door at rear: 2,450 mm RUNNING GEAR: * Number of axles: 3 pcs * BPW axles with air suspension and disc brakes * Both front axles are fixed, the rear axle is steering * Air suspension incl. 1 load gauge * Overload-sensitive manual axle lift on 1st axle * Wabco EBS 4S/3M braking system * ABS, electro-pneumatic dual-circuit braking system * 24V lighting system with 2 x 7-pin + 1 x 15-pin sockets * Tyres: 6 x 385/65 R 22.5 CHASSIS: * High-quality, high-strength S700 MC steel chassis, ISO 1726 compliant * 2 mm omega-profile reinforced 30 mm hardwood flooring * 2” king pin with bolted connection * Mechanical landing gear: front telescopic support legs with 50-ton static capacity LOAD SECURING: * Lashing rings * Stake pockets * Removable stanchions * Container locks suitable for 1x20 ft., 2x20 ft., 1x40 ft., and 1x45 ft. containers * Steel front wall, 1,500+500 mm high, with Code-XL certificate ACCESSORIES: * 1 stainless steel toolbox, 1,000 mm x 500 mm x 500 mm (W x D x H) * Standard access ladder * Side underrun protection, steel, according to regulation 89/297/EEC * Stanchion box: 6 pcs, mounted on front plate * 2x2 oversize panels with LED lighting * Rotating beacon PAINT: * Chassis colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 21.130 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 11/2026, skupna širina: 2.540 mm, skupna višina: 1.980 mm, Oprema: ABS, Kässbohrer SLL 2-axle lowbed with hydraulic steering Highlight: Optionally available for rent as a complete unit together with the pictured truck. Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed semi-trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 traffic red Dimensions & Weights - Overall length: 13,210 mm - Overall width: 2,540 mm - Fifth wheel height (H5): 1,250 mm - Platform height (unladen): 910 mm - Platform height (laden): 300 mm - Platform length: 6,810 mm - Extension: 5,550 mm - Gooseneck length: 3,600 mm - Rear swing door: 2,100 mm - Platform thickness: 200 mm - Wheelbase: 10,530 mm - Axle spacing: 1,360 mm - Unladen weight: approx. 12,873 kg (±3%) - Gross weight (40 / 60 / 80 km/h): 42,000 kg - Total axle load: 24,000 kg - Permissible kingpin load: 18,000 kg (40 / 60 / 80 km/h) ---Running Gear & Axles - 2 axles - 2 hydraulically steered axles - Axles: BPW - Suspension: Air suspension - Suspension stroke: 260 mm (190 mm / -70 mm) - Additional raising of driving level by 40 mm possible - Load gauge for axle load display - Semi-automatic axle centering with warning light sensor ---Brake System - WABCO EBS 2S/2M - ABS (Anti-lock Braking System) - RSS (Roll Stability Support) - Brake system in accordance with UN ECE R13 ---Electrics & Lighting - 24 V LED lighting system - 2 × 7-pin + 1 × 15-pin socket - LED brake lights - LED rear and fog tail lights - Electrical system in accordance with UN ECE R48 & ADR - Rear LED work lights (2 pieces, reverse gear dependent) - Rotating LED beacon (1 piece) ---Tyres & Rims - Tyre size: 245/70 R17.5 - Tyres: M+S - 3PMSF (winter suitable) - Tyre pressure monitoring system according to R141 - Number of wheels: 9 complete wheels - Rims: Steel rims (Kässbohrer choice) - Spare wheel holder: 1 piece on gooseneck ---Steering & Controls - Hydraulic steering on both axles - Control panel in vehicle - Remote control for external steering control - Multifunctional WABCO Smartboard - Axle load indicator - Suspension control - Tyre & brake wear monitoring - Breakdown & system monitoring ---Chassis & Frame - High-strength steel S700 MC (ISO 1726) - Welded bogie bed connection - Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck - Adjustable and detachable gooseneck - 1 × 2 hydraulic cylinders, 220 bar operating pressure - Kingpin: 2 inch, bolted - Kingpin position: single ---Platform & Superstructure - 3 removable platforms with hardwood flooring - Each platform: 100 × 1,300 × 2,115 mm - Weight per platform: 225 kg - 2 × lashing rings per platform, each with 8,000 kg lashing capacity - Platform widening: 225 mm, galvanized - Extension clamps: 12 × 2 pieces, galvanized ---Load Securing Lashing rings: - 1 × 2 pieces 13.4 t on gooseneck - 7 × 2 pieces 13.4 t - 4 × 2 pieces 8 t in lowbed - 2 × 2 pieces 13.4 t - 3 × 2 pieces 8 t on rear platform Stake pockets: - 6 × 2 pieces in pool (50 × 100 mm) - 3 × 2 pieces at rear (50 × 100 mm) Blsdpoycnbajfx Ak Ajk ---Accessories & Equipment - Aluminium front panel gooseneck: 360 × 1,550 mm - Aluminium side panels: 360 × 1,900 mm - Aluminium rear panel: 360 × 2,480 mm - Toolboxes right & left (500 × 350 × 400 mm) - Central lubrication system - Side underrun protection as per ECE R73 - Warning...

Stanje: rabljeno, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2010, Oprema: ABS, Polpriklopnik - številka šasije: W09PG3009A0M49815 - Prva registracija: 25.08.2010 DOLLY - številka šasije: W09PG3009A0M49816 - Prva registracija: 25.08.2010 ELEKTRO-HIDRAVLIKA Nemški tehnični pregled (DE HU) zapade Lastna teža: Polpriklopnik: 16.850 kg -- DOLLY: 2.240 kg Višina priklopa: 1.280 mm - zamenljiv kraljevi zatič - 3,5" Obračalni krog spredaj cca 1.640 mm ---- hidravlično spuščajoč in po višini nastavljiv labodji vrat - dolžina 3.750 mm Globoko ležišče: dolžina: 6.850 mm, širina 2.750 mm - nakladalna višina: cca 350 mm TELESKOPSKO podaljšljivo za 4.000 mm RAZŠIRLJIVO do 3.210 mm Podvozje: dolžina: 4.100 mm, širina: 2.750 mm - nakladalna višina: cca 1.035 mm Skupna dolžina: 14.700 mm Blsdpewxi Nrjfx Ak Ajk Baggerska zajemalka - vdolbina za ročico Centralni sistem mazanja GIGANT osi - NIHALNE OSI z bobnastimi zavorami z daljinskim upravljanjem 3 x hidravlično vzmetene in prisilno vodene osi Nosilnosti osi: 3 x 12.000 kg Največja nosilnost priklopa: 25.000 kg Pnevmatike: 245/70 R 17,5 ustrezen DOLLY z 1 osjo BPW Eco os z bobnasto zavoro Zračno vzmetenje Pridržujemo si pravico do sprememb, predhodne prodaje in napak. Opis služi splošni identifikaciji vozila in ne predstavlja jamstva v pravnem smislu prodaje. Pravno zavezujoč je izključno opis v kupoprodajni pogodbi. Naša ponudba je praviloma brez novega TÜV pregleda. Če želite novo TÜV potrdilo, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko polepljeno ali označeno z oglaševanjem. Uporabljajo se naši splošni dobavni in plačilni pogoji.

Stanje: rabljeno, skupna masa: 133.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2023, Oprema: ABS, Trailer - Vehicle Identification Number: XNJ55H5XX23H01262 - First registration: 29.11.2023 DOLLY - Vehicle Identification Number: XNJ33H5XD23H01262 - First registration: 29.11.2023 POWER HYDRAULICS with NATO socket – or machine hydraulics German registration Unladen weight: Trailer: 27,140 kg | DOLLY: 13,200 kg Fifth wheel height: 1,350 mm – Replaceable kingpin – 3.5" Bledpfjx Ialvjx Ak Aek Front swing clearance approx. 1,732 mm ---- Hydraulic, detachable and height-adjustable swan neck – Length 4,020 mm Lowbed: Length: 8,000 mm Width: 2,870 mm – Loading height: approx. 560 mm TELESCOPIC extension by 5,800 mm EXPANDABLE up to 3,240 mm Chassis frame: Length: 7,410 mm Width: 2,750 mm – Loading height: approx. 1,100 mm Total length with dolly: 24,622 mm / without dolly: 20,140 mm Excavator trough - dipper stick recess Central lubrication system BROSHUIS axles – PENDLE AXLES with drum brakes with radio remote control 5 x hydraulically suspended and forced-steered axles Axle loads: 5 x 12,000 kg Maximum fifth wheel load: 25,000 kg Tyres: 285/70 R 19.5 – Tread depth approx. 10 mm throughout Matching 3-axle DOLLY Hydraulically suspended axles Modifications, prior sale, and errors expressly reserved. The description serves for general vehicle identification and does not constitute a guarantee in the legal sense. The contractual vehicle specification is binding. Our offer is generally without new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or decals. Our general terms of delivery and payment apply.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.500 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 26.200 kg, konfiguracija osi: 2 osi, skupna dolžina: 12.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Bjdpfxji Ri Hre Ak Aolk Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: novo, lastna masa: 11.800 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: siv, Oprema: ABS, Grlo labodje oblike, togo, v izvedbi s sredinskimi cevmi: - Sprednji vogali 90° - Zaprt zunanji okvir z izrezi za pritrdilne pasove - Letev z luknjami za aluminijaste nakladalne rampe - 2" - kraljevski čep (king pin) - Mehansko upravljane BPW podporne noge na desni strani v smeri vožnje - 550 mm dolga, 8° posnetina na koncu grla laboda - 3 para vgradnih pritrdilnih obročev v nakladalni površini grla laboda, 2 para žepov za količke 100 x 50 mm v nakladalni površini grla laboda Nakladalna površina: - Zaprt zunanji okvir z izrezi za pritrdilne pasove - Fiksni sprednji del 360 mm - Tla iz pločevine z nedrsečo prevleko - Bagersko korito vključno z dolgimi režami za pritrjevanje tovora - 1 par fiksnih kolesnih vdolbin pred prvim osjo, globine 390 mm, vključno z oprijemnimi letvami na posnetini - 1 par fiksnih kolesnih vdolbin med prvo in drugo osjo, globine 390 mm, vključno z oprijemnimi letvami na posnetini - Tehnični največji izvlek 3.740 mm - Prekrivne plošče iz aluminija za kolesne vdolbine "Premium", polna širina 600 mm, razširljivo na 3.000 mm z nosilnostjo kolesne vdolbine 8 t - Različne globine kolesnih vdolbin z uporabo prekrivnih plošč (približna globina: 390 mm in 260 mm) - Zadnji del vozila posnet pod kotom 8°, dolžina 550 mm - Izvedba z drsnikom za enostavno montažo in demontažo ramp - Mehanske, vzmetno podprte komfortne zložljive podporne noge na zadnjem delu vozila za podporo med nakladanjem - Neprekinjen blatnik na zadku - 1 par pritrdilnih točk LC 10.000 daN na sredini začetka nakladalne površine - 1 par pritrdilnih točk LC 10.000 daN na sredini zadnjega dela nakladalne površine - 7 parov pritrdilnih točk LC 10.000 daN v zunanjem okviru nakladalne površine 3-osno podvozje: - Osi BPW ECO Max, zračno vzmetene - Dvojne pnevmatike 245/70 R17.5 z 12 t osno obremenitvijo - Sistem za nadzor tlaka v pnevmatikah (RDKS) s senzorji na platiščih - 2x os z hidravličnim prisilnim krmiljenjem in 1x toga os - Zavore proizvajalca Knorr (v skladu z EU predpisi z EBS-E) - TIM G2 od Knorr (modul za informacije o prikolici) - Sistem za stabilizacijo vožnje RSS (Roll Stability Support) - Standardno druga nakladalna višina na 895 mm (-100/+100) - Upravljanje krmiljenja za sledenje preko radijskega daljinca ali stikala na grlu laboda, vključno s funkcijo enoslednosti - Prilagodljiva dvižna os na prvi osi z vključenim pomočnikom za speljevanje (prisilni spust dvižne osi preko TIM mogoč) Rampi, dvodelni: - DxŠ 4.300 x 800 mm - Nosilnost 38 t; lesena obloga iz macesna - Integrirano mehansko zaklepanje v cilindru za dviganje rampe za varovanje rampe v transportnem položaju - Upravljanje ramp: dviganje in premikanje hidravlično Bjdpszdz Iusfx Ak Aelk - Radijski daljinec za upravljanje krmiljenja za sledenje se lahko uporablja tudi za upravljanje zadnjih funkcij - Elektrohidravlična enota za upravljanje ramp Dodatna oprema vključena: - Prednja stena vključno s parkirnim mestom za zadnjo steno, približno 400 mm visoka - Nosilec rezervnega kolesa postavljen na sprednji strani grla laboda, vključno z rezervnim kolesom (prosto) - Podložni klini z nosilci - Nosilne palice za razširitev na 3.000 mm - Aluminijaste snemljive stranske stene višine 400 mm, sestavljene iz 2x bočnih sten dolžine približno 3.150 mm in zadnje stene s stebri (pocinkano) - 2 para opozorilnih tabel 423 mm x 423 mm, z 2 pozicijskima lučema in priključkom za vrtljivo svetilko - Ena vstavna pregrada na koncu bagerskega korita - Traffideckgo gumijasta prevleka, višina sloja 8 mm na zunanjem delu nakladalne povr

Stanje: novo, lastna masa: 11.800 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: siv, Oprema: ABS, Labuž s sredinsko cevjo, tog: -Sprednji vogali 90° -Zaprt zunanji okvir z izrezi za napenjalne trakove -Perforirana letvica za alu-nakladalne rampe -2" kraljevski zatič -BPW mehansko upravljani podporni stebri, desno v smeri vožnje -550 mm dolg, 8° zožen konec labuža Bodpfx Akozdzuns Aslk -3 pari vgrajenih pritrdilnih obročev v nakladalni površini labuža, 2 para žepov za kole v velikosti 100 x 50 mm v labužu Nakladalna površina: -Zaprt zunanji okvir z izrezi za napenjalne trakove -Fiksni sprednji del 360 mm -Talna obloga iz pločevine z nedrsečo prevleko -Izrez za bagersko roko z vzdolžnimi odprtinami za pritrditev tovora -1 par fiksnih vdolbin za kolesa pred prvo osjo, globina 390 mm, vključno z lestvami za vzpon v poševnini -1 par fiksnih vdolbin za kolesa med prvo in drugo osjo, globina 390 mm, vključno z lestvami za vzpon v poševnini -Maksimalno tehnično izvlečenje 3.740 mm -Aluminijasti pokrovi za vdolbine za kolesa "Premium", širina 600 mm, razširljivo na 3.000 mm, nosilnost koles do 8 t -Različne globine vdolbin glede na uporabo pokrova (ca. 390 mm in 260 mm globine) -Zaobljen zadnji del vozila 8°, dolžine 550 mm -Izvedba s sani za enostavno montažo/demontažo ramp -Mehanske, vzmetno podprte komfortne padajoče podpore na zadku za podporo ob nakladanju -Preko celotne širine montiran blatnik na zadku -1 par pritrdilnih točk LC 10.000 daN sredi začetka nakladalne površine -1 par pritrdilnih točk LC 10.000 daN sredi zadnjega dela nakladalne površine -7 parov pritrdilnih točk LC 10.000 daN v zunanjem okviru nakladalne površine 3-osno podvozje: -BPW ECO Max osi, zračno vzmetene -Dvojne pnevmatike 245/70 R17.5 z 12 t nosilnosti na os -Sistem za nadzor tlaka v pnevmatikah (RDKS) s senzorji na platiščih -2x os s hidravličnim prisilnim krmiljenjem, 1x toga os -Zavorni sistem tipa Knorr (po EU predpisih z EBS-E) -TIM G2 by Knorr (TrailerInformationModul) -Stabilizacija vozila RSS (Roll Stability Support) -Privzeto druga nakladalna višina 895 mm (-100/+100) -Upravljanje prisilnega krmiljenja prek radijskega daljinca ali gumba na labužu, vključno z enostavno usmeritvijo -Obremenitveno odvisna dvižna os na prvi osi z asistentom za speljevanje (možno prisilno spušanje osi prek TIM) Rampi, dvodelni: -DxŠ 4.300 x 800 mm -Nosilnost 38 t; lesen pod iz macesna -Vgrajena mehanska ključavnica v cilindru dvigala za varnostni transport položaj -Upravljanje rampe: dviganje in premikanje hidravlično -Radijski daljinec za upravljanje krmiljenja se lahko uporablja tudi za upravljanje zadnjih funkcij -Elektro-hidravlična enota za upravljanje ramp Vključen dodatni pribor: -Sprednja stena z odlagalnim mestom za zadnjo steno, višina ca. 400 mm -Nosilec rezervnega kolesa, navpičen na sprednjem delu labuža, vključuje rezervno kolo (nesestavljeno) -Zagozde za kolesa z nosilcem -Razširitveni nosilci za širino do 3.000 mm -Aluminijaste vtične stene 400 mm visoke, 2x stranska stena dolžine ca. 3.150 mm in zadnja stena z vložki (pocinkana) -2 para opozorilnih tabel 423 mm x 423 mm s 2 pozicijskima lučema in mestom za rotacijsko luč -Ena vtična zaščitna plošča na koncu bagerske vdolbine -Traffideckgo gumijasta prevleka, višina 8 mm na zunanji strani nakladalne površine vključno z zadnjo poševnino, brez sprednjega fiksnega dela, s peskom -Stranske lestve na zadnji poševnini -Rdeča obrisna oznaka na zadku -Bela stranska obrisna oznaka -Centralno mazalni sistem (krmiljenje in podvozje)

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick Bljdpfx Aek Aht Ujk Ajk - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after extension with 80x80 mm step - Reinforced frame design / point load focused in the retracted state - Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm - Underrun protection = extended end plate - Drop support legs at the rear Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster Bedpfx Asxnnk Dek Aolk - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered by offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on swan neck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 removable ECE sign at the rear - 11 pairs ZK modules 10t, on the side: - 2x on the swan neck - 2x on the loading platform in front of the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm - 4 plug-in holders for warning signs in stake pockets on loading platform - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection Optional: The trailer is available with ramps.

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Bodpek Ahugsfx Ak Ajlk Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Bsdpfxsk Eammj Ak Ajlk Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Chassis: -Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm -Frame neck 200 mm with beveled front corners -Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area) -2 king pin positions with replaceable 2” king pin -Outer frame closed to the outside as hole profile outer frame -Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm -Frame before and after extension with 80x80 mm step -Reinforced frame design / point load support in retracted position at center of gravity -Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame) -With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle -1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm -Underrun protection = extended rear plate -Drop support legs at rear Floor: -35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tires: -BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -Lift-and-lower system with total lift approx. 200 mm -2nd ride height via ball valve +50mm -1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer Bodpeywv Ixofx Ak Aelk -3rd axle is a friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, centrally offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Removable drop sides and rear wall on the gooseneck, approx. 400 mm high -Spare wheel holder -Lateral aluminum side underrun protection -4 wheel chocks with bracket -Elongated license plate holder in the rear plate -1 plug-in ECE sign at rear -11 pairs of 10t lashing modules at the sides: 2x on gooseneck 2x on cargo bed in front of the extension 7x after extension -Without rear towing eyes -Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm -4 holders for warning boards, insertable in stake pockets on the cargo bed -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) -2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection -Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps Optional: the trailer is available with aluminum loading ramps

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 11.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2022, Low-bed semi-trailer Kässbohrer LB2 TIEF-BETT / 16.5 m / Extendable semi-trailer / Steering axles / 2 units Year: 2022 Technical data: Gross weight: 42,000 kg Registered GVW: 38,000 kg Unladen weight: 12,500 kg Blsdpfxszmv T Dj Ak Ajk Payload capacity: 29,500 kg 2 steering axles BWP axles Air suspension Disc brakes Remote control Detachable front Main deck length: 660 cm Extendable platform length: 460 cm Total main deck length: 1,120 cm Rear platform length: 270 cm Ride height: 40 cm Width with extensions: 255 cm Core width: 130 cm Extended: 25 cm on each side Special permits: Vehicle width: 3.20 m Distance between kingpin and rear end of semi-trailer: 16.525 m GVM: 38,000 kg Permissible axle group load: 20,000 kg (1st axle – 10,000 kg; 2nd axle – 10,000 kg) The semi-trailer is in excellent technical and visual condition. Complete documentation available. 2 identical semi-trailers available.

Stanje: rabljeno, največja dovoljena obremenitev: 26.830 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2027, 3-osna prikolica Kässbohrer KSLA RJ Mega z nizko nosilnostjo | Raztegljiva za 3.500 mm | Razširjiva za 600 mm Šasija: WKVDAS00300125992 Podvozje / dodatni deli: * Višina sedla 950 mm * Zračna vzmetitev * Dviganje in spuščanje * Dvigalna os 1. os * Sledenjska os 3. os * 3 x osi BPW * Zavorni sistem WABCO * Podpiralni nogice JOST * Merilnik obremenitve * Vtičnica NATO * Orodjarna * Pocinkane razširitve * Nosilci za razširitve * Stranske zaščitne letve * Plošče za prekomerno širino z osvetlitvijo Bjdpszcil Tefx Ak Aolk * Zadnje podpiralne nogice * Pnevmatike: 205/65 R17.5 * Preostala višina profila 80-90% * Električni vitel NOVAWINCH T-8000 * Radijski daljinski upravljalnik za vitel * Več nosilcev za pritrditev tovorov / dodatna oprema za pritrditev tovorov v orodjarni * Velika jeklena orodjarna na platformi Nadgradnja: * Prikolica Kässbohrer KSLA RJ Mega z nizko nosilnostjo * Niše za kolesa * Pokrovi niš za kolesa * Niša za roko bagra * Raztegljiva za 3.500 mm * Razširjiva za 600 mm * Dolžina tovorne površine: 11.980 mm + 3.500 mm raztezek * Širina: 2.550 mm + 600 mm razširitev * Višina platforme: 820 mm * Višina sedla: 1.130 mm * Leseno/jekleno dno * Aluminijaste stranske stene na zgornji platformi * Hidravlične dvodelne rampe * Levi in desni rampi, ki se upravljata ločeno s hidravliko Teže: * Skupna masa: 39.000 kg * Nosilnost: 26.830 kg * Lastna masa: 12.170 kg * Obremenitev sedla: 15.000 kg Drugo: * Datum prve registracije: 10.04.2025 * Nemška registracija * Tehnični pregled: 05/2027 * Pregled varnosti: 10/2027 ----Novi tehnični pregledi / pregledi varnosti ali spremembe teže (povečanje/zmanjšanje) so na voljo na zahtevo. Z veseljem vam pomagamo pri pridobivanju izvoznih/prehodnih registrskih tablic, prav tako je možen prevoz vaših kupljenih vozil po Nemčiji. Kontaktirajte nas! Govorimo naslednje jezike: nemščina, angleščina in ruščina! Brez odgovornosti za tiskarske in prepisne napake, spremembe, vmesno prodajo in napake. Kdo smo? Leible Nutzfahrzeuge je družinsko podjetje s sedežem v Kehlu na Renu. Zaradi naših dolgoletnih izkušenj na področju priprave in prodaje gospodarskih vozil smo zanesljiv partner za stranke. Posebna prednost podjetja Leible Nutzfahrzeuge je prodaja novih in rabljenih gospodarskih vozil. Na 11.000 m² se nahaja širok izbor vozil. Našo poslovno filozofijo zaznamujejo poštenost in resnost. Ker nam je zadovoljstvo strank zelo pomembno, našim strankam ponujamo odličen celostni paket storitev in jim zagotavljamo kompetentno kontaktno osebo, ki jim pomaga pri nakupu ali prodaji vozil. Prepričajte se sami! Naše storitve za vas: Nakladanje vozil. Z veseljem vam pomagamo pri nakladanju kupljenih vozil. Organizacija specialnega prevoza. Z veseljem vam pomagamo pri organizaciji specialnega prevoza. Dnevne številke / izvozne registrirske tablice. Z veseljem vam pomagamo pri pridobivanju izvoznih registrskih tablic/kratkoročnih registrskih tablic. Izvajanje carinskih formalnosti. Z veseljem vam pomagamo pri reševanju carinskih zadev.

Stanje: rabljeno, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2011, Oprema: ABS, Vehicle Identification No.: W09TS300990M49248 TELESCOPIC EXTENSION up to 4,300 mm SLIDING TABLE WHEEL RECESSES Unladen weight: 9,000 kg German MOT (HU) due Neck length: 3,650 mm – Saddle height: 1,250 mm Low bed: Length: 9,430 mm (of which 1,830 mm are tapered) – Width: 2,540 mm – Loading height: 890 mm Hook-in rails Support stands Widening lighting Fifth wheel load at front: max. 19,000 kg Axle loads (technical) 3 x 10,000 kg BPW Eco Plus axles with drum brakes Axle 1 = LIFTABLE Bledpfxoyx N Eyo Ak Ajk 2 x toolboxes Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Modifications, prior sale, and errors excepted. The description is intended for general vehicle identification only and does not represent a guarantee as per sales law. The terms outlined in the purchase contract are decisive. Our offer is in general without new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide a quote from one of our partner workshops! The vehicle may have advertising stickers and/or lettering applied. Our general terms of delivery and payment apply.