Jansen Mulcher Efgch-220 !!Neu!! nakup rabljenega (4.633)

Stanje: novo, Leto izdelave: 2026, * Jansen EFGCH-220 * Flail Mower * New * Mulcher * Year of manufacture: 2026 * Mowing width: approx. 2200 mm * Hydraulic side shift * Weight: 555 kg * PTO shaft * V-belts: 4 pieces * Dimensions: 2560x950x930 mm (LxWxH) * Flail shaft Ø: 120 mm * Roller Ø: 95 mm * Packaging dimensions: 2660x880x800 mm (LxWxH) * RPM: 540 * Wall thickness: 6 mm (internal plates 5 mm) * Mounting: Three-point linkage from Cat. I * Tractor: min. 60 HP ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We explicitly reserve the right for prior sale, as this item is also offered on other platforms. We strongly recommend an inspection and evaluation to avoid any misunderstandings regarding the condition and suitability of the machinery. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged!!! Images are similar and may show optional accessories at extra cost. All internal dimensions stated are approximate. Hfjdpfxovvgirs Aiask TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART-EXCHANGE AND CASH UPGRADES POSSIBLE!!! Exhibition ground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am – 5:00 pm, Saturday 8:30 am – 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, Leto izdelave: 2026, Jansen Mower AGF-220 Embankment Mulcher Hfodpfx Aisnm Aq Hoask * Mulcher 2026 * Embankment mower * Slope mower * Mowing width: 2180 mm * Weight: 915 kg * Blade type: 1.2 kg hammer flails * Adjustable tilt angle: +90° to -55° * PTO shaft: included * PTO speed: 540 rpm * Flail shaft diameter: 170 mm * Rear roller diameter: 170 mm * Wall thickness: 4-15 mm (depending on device position) * Mounting: three-point hitch from Cat. II * Drive: 5 V-belts * Hydraulically foldable 180 degrees * Tractor: minimum 90 HP * Packing dimensions: 2850 mm x 1120 mm x 980 mm IMPORTANT NOTICE - PLEASE READ CAREFULLY! We expressly reserve the right to prior sale, as we list this item on other platforms as well. We strongly recommend an on-site inspection and evaluation to ensure there are no misunderstandings about condition or suitability. Inspections and tests are possible at any time by appointment and are expressly encouraged! Images may be similar and may contain optional equipment subject to additional charges. The stated internal dimensions are approximate. For new vehicles, additional costs may apply for vehicle documentation and freight. TRADE-INS POSSIBLE FOR ALMOST ANYTHING! EXCHANGES AND ADDITIONAL PAYMENTS ACCEPTED! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers always in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, Leto izdelave: 2026, * Jansen EFGC - 220 Flail Mower * New * Mulcher * Mower deck * Year of manufacture: 2026 * Weight: 425 kg * Working width: 2.2 m * PTO shaft * Three-point hitch * PTO drive: 540 rpm * Protective flap * Hydraulic side shift can be retrofitted upon request * Available in smaller and larger working widths ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to intermediate sale, as this item is also offered on other platforms. We strongly recommend inspecting and checking the equipment to avoid any misconceptions regarding its condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are for reference only and may show optional equipment subject to additional charges. All stated internal dimensions are approximate. For new vehicles, additional costs for vehicle documents and shipping may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! TRADE DEALS AND ADDITIONAL PAYMENT OPTIONS AVAILABLE!!! Showroom location: 58285 Gevelsberg, Am Sinnerhoop 17 Hfodpjm E Nl Usfx Aiaok Opening hours: Monday to Friday 8:30 am - 5:00 pm, Saturday 8:30 am - 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, Leto izdelave: 2026, Jansen Mower AGF-220 Embankment Mulcher * Mulcher * Embankment Mower * Bank Mower * Demonstration unit!! * Used only once!! Like NEW!! * Year of manufacture: 2026 * Cutting width: 2180 mm * Weight: 915 kg * Blade type: 1.2 kg hammer flails * Inclination angle: +90° to -55° * PTO shaft * RPM: 540 * Flail shaft Ø: 170 mm * Rear roller Ø: 170 mm * Wall thickness: 4-15 mm (depending on position on the unit) * Mounting: Three-point hitch, Category II and above * Drive: 5 toothed belts * Hydraulically foldable 180 degrees * Tractor: min. 90 HP ATTENTION!!!! PLEASE READ CAREFULLY!!!! Hodpfsx Hrgvsx Aiajfk We expressly reserve the right to prior sale as this item is also offered on other platforms. We highly recommend an inspection and check to ensure the buyer has a precise understanding of the condition and suitability. Inspections and checks are possible and expressly encouraged at any time by appointment!!! Images are similar and may include optional accessories subject to a surcharge. The specified internal dimensions are approximate. For new vehicles, additional costs for vehicle documents and freight may apply. Errors and typing mistakes excepted, information provided without guarantee. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! TRADE AND ADDITIONAL PAYMENT DEALS POSSIBLE!!! Display lot: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers always in stock!!! Pegasus Trailers Ltd. Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, Leto izdelave: 2026, Jansen THS-180 Tractor Rear Hedge Trimmer new 2026 Hedge Trimmer Branches with 2-4 cm diameter Euro-mount Suitable for tractors, compact tractors, yard loaders, wheel loaders, and front loaders Working width: 180 cm Total weight: approx. 172 kg hydraulic drive Boom can be mechanically extended laterally by approx. 80 cm Required hydraulic connections on the carrier vehicle: 1x double-acting 12 Volt connection for the electromagnetic control valve Technical Data: Mounting: Euro front loader mounting Cutter bar drive: hydraulic Effective cutting width: 180 cm Branch diameter depending on wood type: 2-4 cm Lateral extension (manual): 80 cm Operating speed: 2-4 km/h Hydraulic connections: 1x double acting 12 Volt connection required for electromagnetic control valve Oil pressure: 155-240 bar Hydraulic flow rate: min. 30 l/min Weight: approx. 172 kg Weight with packaging: approx. 190 kg Packaging dimensions: 195x74x45 cm IMPORTANT !!!!! PLEASE READ !!!!! We expressly reserve the right of prior sale, as we also offer this item on other platforms. We strongly recommend an inspection and check, to ensure the buyer has an accurate understanding of the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images similar, may include optional accessories for an additional charge. Stated internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! TRADE DEALS AND ADDITIONAL PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Additional costs may apply for vehicle documentation and shipping for new vehicles. Pegasus Anhänger GmbH Am Sinnerhoop 17 Hfsdpevvgm Dofx Aiajk 58285 Gevelsberg Tel.: Fax:

Stanje: novo, skupna masa: 750 kg, dolžina tovornega prostora: 2.200 mm, Leto izdelave: 2025, buy online and save at trailer-shop Many models available online at ANHÄNGERWIRTZ Convenient online shopping 24/7 Pick up yourself or opt for delivery. The online pick-up market for your new trailer offers leading brand models! Over 850 new trailers in stock Over 130 used trailers always available. Hjdpfxoy Ulcys Aiajfk Non-binding example: order and pick up immediately from our showroom Various model variants available Roadster 220, interior dimensions 220x108x115 cm, 750kg unbraked single-axle low loader with V-frame, plywood construction with white side panels, rear door with rotary bar lock, 12V interior light, 4 lashing rings on the lower edge of the sidewall (up to 250kg), jockey wheel. Only while stocks last! Invoice with VAT shown - Warranty - Trailer dealer for over 35 years Sales/phone order service hours: MON - FRI 08:00 - 12:30 & 14:00 - 18:00 or 24/7 through our online shop at trailer-shop de Colours and specifications may vary Copyright/Trademark 05/26 Item no.: roadster220

Stanje: novo, skupna masa: 750 kg, dolžina tovornega prostora: 2.200 mm, Leto izdelave: 2025, Buy online and save at trailer-shop Many models available online at ANHÄNGERWIRTZ Convenient and around-the-clock online purchasing 24/7 Pick up yourself or have it delivered. Hjdsy D Hg Espfx Aiajfk The online pick-up market for your new trailer offers leading brand manufacturers! Over 850 new trailers in stock Over 130 used trailers always available. Non-binding example: Order and pick up directly from our showroom Various model variants available Roadster 220, 220x108x115 cm internal dimensions, 750 kg unbraked, single-axle low loader V chassis, plywood construction with white side walls, rear door with rod locking mechanism, 12V interior light, 4 lashing rings on the lower side rail (up to 250 kg), jockey wheel. Only while stocks last! Invoice with VAT shown - Warranty - Trailer dealer for over 35 years Sales via telephone order acceptance at the following times: MON. - FRI. 08:00 - 12:30 & 14:00 - 18:00 Or around the clock via our online shop at trailer-shop de Colour and design may vary Copyright - Trademark protection 04/26 Item no.: roadster220

Stanje: novo, skupna masa: 750 kg, dolžina tovornega prostora: 2.200 mm, Leto izdelave: 2025, buy online and save at trailer-shop Many models available online at ANHÄNGERWIRTZ Convenient 24/7 online purchasing Pick up yourself or request delivery. The online collection market for your new trailer offers premium brand manufacturers! Over 850 new trailers in stock More than 130 used trailers continuously available. Non-binding sample offer: order and collect directly from our showroom Hfjdpfew Tranex Aiaek Various model variants available Roadster 220 220x108x115 cm interior, 750kg unbraked single axle low loader V-chassis, plywood body with white side panels, rear door with bar lock, 12V interior light, 4 tie-down rings integrated in the lower side rail for loads up to 250kg, jockey wheel included. Only while stocks last! Invoice including VAT. Warranty – trailer dealer for over 34 years Sales - Telephone orders accepted during the following hours: Mon - Fri 08:00 - 12:30 and 14:00 - 18:00 Or 24/7 via our online shop at trailer-shop de Colors and specifications may vary Copyright & Trademark Protection 08/25 Article No.: roadster220

Stanje: novo, delovna širina: 125.000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at [number]). Seppi M. H7 125 Flail Mulcher / incl. floating mounting / NEW device / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm diameter - For excavators from 5 to 15 tons - Universal interface for mounting various attachment plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: Low profile design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor according to carrier hydraulic output - 4D ROLLER: reinforced support roller, 152 mm diameter, with double cone roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front protection with chains - Rear protection made of rubber - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, spare part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min–max): 29 – 58 - Required hydraulic pressure in bar (min–max): 100 – 300 - Required hydraulic flow in l/min (min–max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) OPT 555 Pendulum Adapter 3 hydraulic lines required: pressure, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse holds a large selection of various Seppi M. products that are immediately available! Mr. Herden (Tel. [number]) will be happy to assist you. Financing quotes available on request. We are official sales and service partners for: - Westtech - OilQuick - Holp - Magni Telescopic Handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Equipment Hodpfx Aoyix Haeiaofk - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further Information = Intended use: Agriculture Contact Marius Herden for more information.

Stanje: novo, tip droga: teleskopski, Leto izdelave: 2025, Vehicle description: Telescopic wheel loader JCB TM220 Year of manufacture 2025 - brand new - Weight approx. 6,322 kg Equipment: - 4-cylinder JCB Kohler diesel engine – Emission stage V - Engine power 54.5 kW (74 hp) - Comfort cabin with heating and air conditioning - Air-suspended driver's seat - 40 km/h version - Wide tires 550/45R 22.5 Alliance Hfedpoyc Dlzjfx Aiajk - Front axle with 100% differential lock / Rear LSD (Limited Slip Differential) - LED work lights on the cab, 2x front / rear each - LED work lights 2x on the boom - “SRS” Smooth-Ride-System – boom suspension - 3rd hydraulic circuit for attachments - Hydraulic quick coupler Type Euro - Hydraulic connections at the rear - Variable constant oil flow - Attachments available at extra cost Delivery by freight forwarder possible, costs to be borne by the buyer. Subject to changes / errors / prior sale = Further information = Please contact Jens Schlüter for more information.

Stanje: novo, Leto izdelave: 2026, Opis Verižni bager JCB 220 X SLC Letnik izdelave 2026 – tovarniško nov Teža približno 24.538 kg Oprema: - JCB DieselMax, 4-valjni turbodizelski motor – stopnja emisij V - Moč motorja 129 kW (175 KM) - Komfortna kabina s klimatsko napravo in radiom - 10-palčni barvni zaslon s kamero 360° - Zračno vzmeten super-delux sedež - vklopni zvočni alarm „beli šum“ - enodelna roka - dolžina roke približno 3.000 mm - ventili za zaščito pred poškodbo hidravličnih cevi na roki in cilindru - 3-delna podvozna plošča, širina približno 800 mm / transportna širina približno 2.970 mm - LED delovne luči na kabini, 4 spredaj / 2 zadaj - LED delovne luči 4 na roki - LED delovne luči 2 zadaj - dodatna hidravlika za kladivo in škarje - dodatna hidravlika za nagibni lopati - hidravlične povezave za hitro menjavo orodja - cev za odvajanje olja - hidravlika, ki se lahko vklopi brez tlaka (npr. za OilQuick) - sistem za skupno upravljanje črpalk (PSS) - sistem za upravljanje orodja ATS (programirljiva količina olja in tlak) - črpalka za točenje goriva - hitra menjava orodja in dodatna oprema, na voljo za doplačilo Možna dostava s špediterjem, stroške krije kupec. Pridržujemo si pravico do sprememb/napake/medčasne prodaje. = Dodatne informacije = Hedpfx Aoznry Noiaefk Za dodatne informacije se obrnite na Jensa Schlüterja.

Stanje: novo, Leto izdelave: 2026, Opis Verižni bager JCB 220 X LC Letnik izdelave 2026 – tovarniško nov Teža približno 24.724 kg Oprema: Hjdpfx Aisznry Asajfk - JCB DieselMax, 4-valjni turbodizelski motor – emisijski razred V - Moč motorja 129 kW (175 KM) - Komfortna kabina s klimatsko napravo in radiem - 10-palčni barvni zaslon s 360° kamero - Zračno vzmeten super-deluxe sedež - vklopni zvočni alarm „beli šum“ - enodelna roka - žlica, dolžina približno 3.000 mm - varnostni ventili proti razpoku cevi na roki in cilindru - 3-delne talne plošče, širina približno 600 mm / transportna širina približno 2.990 mm - LED delovne luči na kabini, 4x spredaj / 2x zadaj - LED delovne luči, 4x na roki - LED delovne luči, 2x zadaj - dodatna hidravlika za kladivo in škarije - dodatna hidravlika za nagibno žlico - cevovod za hidravlični sistem za hitro menjavo orodja - cev za odvajanje olja - hidravlični sistem, ki se lahko vklopi brez tlaka (npr. za OilQuick) - agregatna črpalka (PSS) - sistem za upravljanje orodja ATS (količina olja in tlak programirljiva) - črpalka za tankanje - sistem za hitro menjavo orodja in dodatna oprema, na voljo za doplačilo Možna dostava s špediterjem, stroške krije kupec. Pridržane spremembe/napake/vmesna prodaja. = Dodatne informacije = Za dodatne informacije se obrnite na Jensa Schlüterja.

Stanje: rabljeno, prevoženi kilometri: 249.000 km, moč: 162 kW (220,26 KM), prva registracija: 01/2020, vrsta goriva: dizel, skupna masa: 11.999 kg, konfiguracija osi: 2 osi, zavore: retarder, vrsta prenosa: mehanski, emisijski razred: Euro 6, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2020, Oprema: ABS, filter saj, klimatska naprava, Nova tristranska kiper zaboj, nihajna zadnja stena, pritrdilne točke v tovorni površini, in še več. Kroglična vlečna kljuka 3,5T, Hfsdpfxjy Skgro Aiaek Klimatska naprava, tempomat, električna okna, električni zunanji ogledali, -Možnost financiranja in odkupa -Dostava po dogovoru - 19% DDV prikazan

Stanje: rabljeno, prevoženi kilometri: 249.000 km, moč: 162 kW (220,26 KM), prva registracija: 01/2020, vrsta goriva: dizel, skupna masa: 11.999 kg, konfiguracija osi: 2 osi, zavore: retarder, vrsta prenosa: mehanski, emisijski razred: Euro 6, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2020, Oprema: ABS, filter saj, klimatska naprava, Nova tristranska kiper keson, zadnja nihajna vrata, pritrdilne točke v tovornem prostoru, in še več. Kroglična sklopka 3,5T. Klimatska naprava, tempomat, električna okna, električno nastavljiva zunanja ogledala. Hfjdpfx Aiey Skgxeaek - Možnost financiranja in odkupa - Dostava po dogovoru - 19% DDV izkazano

Stanje: novo, Leto izdelave: 2026, moč: 163 kW (221,62 KM), Oprema: ABS, kabina, klimatska naprava, pogon na vsa štiri kolesa, sprednja priključna naprava, JCB 4220 Fasttrac ICON Traktor * Traktor * Nov vozilo * Široke pnevmatike * Polna oprema * Takoj na voljo * 60 km/h * Pro-Line Deutschland 4220 paket * Leto izdelave: 2026 * Delovne ure: 10 h * Skupna masa: 14,500 kg * Skupne mere: 6000 mm x 2550 mm x 3000 mm * Dizelski motor * Moč: 163 kW / 222 KM * Delovna prostornina: 6596 ccm * Širina sledi: 2000 mm * Dimenzije pnevmatik: IF 710/60R30 * 4-kolesno krmiljenje * 3 različni programi za krmiljenje * 4WS * ABS * ISOBUS * Load Sensing * V-Tronic menjalnik * Brezstopenjski Agco menjalnik * Heavy-Dusty osi * Dvostransko delujoče vzmetenje * Zadnja in sprednja kardanska gred (PTO) * Sprednji PTO sredinsko 1 2/8", 1000 obr/min * Vlečni okvir z nihajno ležišče * Rockinger vlečna sklopka D38 mm * Rockinger nihajno vpetje K80 * 2x K50 spojke * Hidravlično nastavljiva zgornja povezava zadaj * Zgornja povezava spredaj * 4 dvostranska hidravlična ventila zadaj * 2 dvostranska hidravlična ventila spredaj * Sprednja dvižna naprava * Zadnja dvižna naprava * Vleka spredaj in zadaj (AHK) * 900 kg utež zadaj * Označitev prekomerne širine * LED delovne luči spredaj in zadaj * Klimatska naprava * Potovalni računalnik * Hladilnik Hfodpfjzhh Aaex Aiaok * Nastavljiv volanski drog * Večfunkcijska ročica * Kamera zadaj * Tipke na blatnikih * Kamera za vzvratno vožnjo * DAB radio * Zračno vzmeten sedež z usnjeno prevleko * Panoramska streha * Sedež za sovoznika * Nastavljiva naslonjala za roke * Preproga v kabini POZOR !!! PROSIMO, PREBERITE !!! Pridržujemo si pravico do predhodne prodaje, saj je artikel na voljo tudi na drugih portalih. Svetujemo in priporočamo ogled ter strokovni pregled, da ne bi pri kupcu prišlo do napačnih predstav o stanju in primernosti. Ogledi in pregledi so možni kadarkoli po predhodnem dogovoru in so izrecno zaželeni!!! Navede notranje mere so približne. MOŽEN ODKUP SKORAJ VSEGA!!! MENJAVA IN DOPLAČILO MOŽNA!!! Razstavni prostor: 58285 Gevelsberg, Am Sinnerhoop 17 Odpiralni čas: ponedeljek–petek 9.00–17.00, sobota 9.00–14.00 stalno na zalogi več kot 500 novih in rabljenih prikolic!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, prevoženi kilometri: 126.116 km, prva registracija: 01/2016, skupna masa: 3.500 kg, skupna dolžina: 6.470 mm, skupna širina: 2.120 mm, skupna višina: 3.000 mm, Proizvajalec: Ruthmann Tip: TB 220.2 Leto izdelave: 2016 Izdelek: Rabljeno Podatki: Maks. delovna višina: 22,35 m Maks. višina ploščadi: 20,35 m Maks. doseg: 14,18 m Skupne dimenzije D x Š x V: 6,47 x 2,12 x 3,00 m Dimenzije ploščadi D x Š: 1,37 x 0,66 m Maks. nosilnost košare: 200 kg Območje vrtenja: 225° Podporna sila: 27 kN (spredaj) / 16 kN (zadaj) Oddaljenost od tal: 0,16 m Širina stabilizatorjev navpično: 2,12 m (spredaj) / 2,12 m (zadaj) Hfodpfx Aexrxp Eoiaek Širina stabilizatorjev enostransko: 2,82 m (spredaj) / 2,73 m (zadaj) Širina stabilizatorjev obojestransko: 3,52 m (spredaj) / 3,34 m (zadaj) Dolžina stabilizatorja: 4,15 m široko / 3,19 m ozko Lastna masa: 3.260 kg Dovoljena skupna masa: 3.500 kg Posebnosti: Zavrtljiv delovni koš 2x55°, maksimalni kot postavitve 5°, nakladalna površina z bočno steno 1,05 x 2,13 m. Opomba: Nov TÜV in UVV Lokacija: 41468 Neuss takoj na voljo

Stanje: rabljeno, Leto izdelave: 2015, Proizvajalec: Ruthmann Tip: TB 220.2 Leto izdelave: 2015 Vrsta proizvoda: Rabljeno Tehnični podatki: Največja delovna višina: 22,35 m Največja višina platforme: 20,35 m Največji doseg: 14,00 m Skupne mere D x Š x V: 7,25 x 2,10 x 3,01 m Hjdpfx Aijw N Ukzjasfk Mere platforme Š x G: 1,38 x 0,68 m Največja nosilnost košare: 200 kg Območje vrtenja: 225° Podporna sila: 27/16 kN Odmik od tal: 0,25 m Širina podpore obeh strani: 3,48/3,33 m Dolžina podpore: 3,95/2,98 m Lastna teža: 3.460 kg Dovoljena skupna teža: 3.500 kg Posebnosti: Vrtljiva delovna košara, največja namestitvena nagibnost 5°, tovorna površina z bočno steno, samodejna povrnitev v osnovni položaj, avtomatska postavitev. Opomba: TÜV in UVV novo Interna št.: 8739 Lokacija: 41468 Neuss takoj na voljo

Stanje: novo, delovna širina: 2.300 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Greentec RM 232 Hedge Mulcher / incl. MS08 Adapter Plate / NEW machine / in stock & immediately available Price: €14,590.00 net / €17,362.10 gross - Working width: 2,300 mm - Number of rotors: 4 units - Number of blades per rotor: 6 units - Max. cutting diameter: 4 cm - Working speed up to: 4 km/h - Required hydraulic connections: 1 x double-acting + 1 x return line (drain oil) - Minimum oil flow: 50 l/min at 180 bar - Weight: 310 kg Delivery without hydraulic hoses and flow divider! Key features: High capacity – Maintain large hedges in no time Unique cutting system – Cuts and shreds branches in one pass Very long service life – Constructed using high-strength steel components The Greentec RM 232 branch cutter is designed for professional use by municipalities, farmers, and contractors. The machine offers a large working width and high operational speed, providing outstanding capacity. Branches are cut and shredded in a single pass. The processed material drops gently onto the ground for decomposition to begin. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We offer a very wide selection of various Greentec products, all in stock for immediate delivery! Mr. Herden (phone) will gladly assist you. Upon request, we can also provide a financing offer. We are the official sales and service partner for: - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Hfsdpfxjy E Ettj Aiajk Errors and prior sale excepted! = More information = Please contact Marius Herden for further details.

Stanje: novo, delovna širina: 105.000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. H3 105 Mulcher / NEW / In stock & immediately available Price: €6,490.00 net / €7,723.10 gross Hjdpfx Aioyix Hmeajfk - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes - Compatible with various adapter plates - Floating mount (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the carrier unit's flow rate - Housing made from wear-resistant AR400 steel - Front guard with chains - Rear guard made of rubber - Reinforced support roller with double-taper roller bearing, height adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pieces, part no. 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and DRAIN SAFE TM motor safety valve to protect the motor in case of improper use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 35 - 60 Optional: MS03 adapter plate including bolts and installation = €530.00 net Requires 3 hydraulic lines: pressure, return, and leakage oil. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. We have a wide selection of different Seppi M. products available in stock! Mr. Herden (phone ...) is happy to assist you. Financing options are available on request. We are an official distribution and service partner for: - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Equipment - Mercedes-Benz - Iveco Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further information.

Stanje: rabljeno, prevoženi kilometri: 199.000 km, moč: 162 kW (220,26 KM), prva registracija: 06/2018, vrsta goriva: dizel, skupna masa: 7.490 kg, barva: modra, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, dolžina tovornega prostora: 7.260 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.385 mm, Leto izdelave: 2018, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, filter saj, klimatska naprava, * NETO CENA * 6-stopenjski ročni menjalnik popolnoma obnovljen!!! * Listno/zračno vzmetenje * LDW asistent za ohranjanje voznega pasu * Motorna zavora * Senčnik * Strešni spojler * Vlečna kljuka * Nakladalna ploščad Palfinger * D x Š x V: 7,26 m x 2,50 m x 2,38 m * Dobro stanje * Nemško vozilo WhatsApp: Pridržujemo si pravico do napak in predprodaje!! Prodaja poteka brez kakršne koli garancije!! - Govorimo rusko - Govorimo angleško - Govorimo poljsko Hsdpoy Rvxqofx Aiaofk - Govorimo špansko

Stanje: novo, Leto izdelave: 2025, *JCB TM220 SV C New Vehicle* - JCB Diesel by Kohler [55kW/74hp] - Emission Stage V with DPF - Lifting height: 4.56m - Rated load capacity: 2,200kg Hfsdpeyfvztefx Aiajk - 2-speed hydrostatic drive - 20km/h - Tyres: GOODYEAR POWERLOAD 300/70R20 - Comfort cab (ROPS/FOPS) - Radio pre-installation - Adjustable steering wheel - Fully opening windows - Heating - SELF-LOCKING DIFFERENTIAL FRONT AND REAR Front axle = 45% Rear axle = 25% - Servo single-lever control - Euro quick coupler - Fork carriage with pallet fork 1,345mm - LED work lights front/rear/boom - Yellow rotating beacon - Armrest right & left - Windscreen wiper on roof Ready for immediate use, many more attachments in stock. A viewing appointment is expressly preferred. On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale! BSS, quick coupler, road approval = Further information = Please contact Tobias Ebert for more information.

Stanje: novo, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Hfsdpfxsykhtle Aiask DMS SG22090 Selector Grab / incl. Rotator / new unit / in stock & immediately available / incl. teeth (bolt-on) Price: €18,590.00 net / €22,122.10 gross - Shell width: 900 mm - Volume: 542 L - Weight (without rotator): 897 kg - Rotator weight: 168 kg - Operating pressure: 320 bar - Closing force: 52 kN - Torque: 4,200 Nm - Opening width: 1,900 mm - Excavator class: 17 – 22 t Optional: - Softgrip XL Set: €3,120.00 net - MS10 adapter plate: €2,645.00 net - MS21 adapter plate: €3,185.00 net - OilQuick OQ 70/55 adapter plate (currently mounted): €5,790.00 net We have many more DMS grabs in stock and available for immediate delivery! Mr. Herden (phone) will be happy to assist you. We will gladly provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles, we are also one of Germany’s largest commercial vehicle dealers. We supply the complete DMS program for you! Errors and prior sale excepted! = More Information = Intended use: Construction Please contact Marius Herden for further information.

Stanje: novo, For inquiries regarding the attachment, please contact Mr. Herden (Tel. ...). Seppi M. BMS-F 125 Forestry Mulcher / incl. hydraulic rotator / NEW / in stock & immediately available Price: €28,390.00 net / €33,784.10 gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulcher for excavator mounting, designed for mulching along riverbanks, in forests, alongside railways, and in other hard-to-reach areas - Mulches brush and wood up to 20 cm Ø - Suitable for excavators from 10 to 20 tons - Mountable to various adapter plates - Drive designed for hydraulic motor, depending on the carrier’s hydraulic flow rate - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid shoes, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pcs, part no. 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 100 - 150 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening rear hood For operation, an independent hydraulic power unit is recommended. 3 hydraulic lines are required for the rotor: supply, return, and drain line. The attachment is supplied without hoses, connectors, and mounting plate. We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We also have a large selection of various Seppi M. products available from stock! Mr. Herden (Tel. ...) will be happy to assist you. On request, we can also provide you with a financing offer. We are an official sales and service partner for: - Magni telescopic handlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Westtech - JCB construction equipment Hfedpfx Aieyii T Ijajk - Mercedes-Benz - Iveco With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. Unladen weight: 780 kg Please contact Marius Herden for further information...

Stanje: novo, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Overall width: 1.20 m Hfjdpfx Aieyltvnjask - Depth: 1.03 m - Height: 0.72 m - Mulcher attachment for excavators - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches brush and wood up to 10 cm in diameter - For excavators from 5 to 10 tonnes - For mounting on various adapter plates - Drive designed for hydraulic motor depending on the carrier unit’s flow rate - Indirect V-belt drive with 5 belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Chain front guard - Chain rear guard - Height-adjustable skid runners, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial-piston hydraulic motor with variable displacement 22 – 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 – 45 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required hydraulic flow rate in l/min (min-max): 40 – 100 Intermediate adapter for BE314 Z1 - Approx. 200 mm high - Not required when using OPT 372 hydraulic 190° rotator Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net An independent hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is additionally required for the hydraulic hood. The unit is supplied without hoses, fittings, or adapter plate. Mr. Herden (phone) will be happy to assist you. Financing options available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We offer you the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Stanje: novo, For inquiries about the attachment, please contact Mr. Herden (by phone) for assistance. Seppi M. BMS 125 Forestry Mulcher / incl. rotation motor / NEW / in stock and immediately available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal unit for mulching in hard-to-reach locations such as roadways, riverbanks, steep slopes, or for clearing gas and power lines - Mulches brush and wood up to 30 cm diameter - For excavators from 13 to 30 t - For mounting on various adapter plates - Drive designed for hydraulic motor depending on the carrier vehicle's oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front guard with chains - Rear guard with chains - Sandwich-design skid shoes, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools featuring tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, Part No. 19702266 - 33 x MONO TIP V-LOCK, Part No. 19702259 - 1 x MONO EXTREME V-LOCK R, Part No. 19702267 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood The rotor requires 3 hydraulic lines: feed, return, and drain. A separate hydraulic circuit is needed for the hood. The unit is supplied without hoses and connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and available for immediate delivery. We keep a very large selection of various Seppi M. products in stock and immediately available! Contact us for more information at / . Hodpfx Aoyltv Ioiaofk On request, we are pleased to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. program! Errors and prior sale excepted. = More information = Please contact Marius Herden for further information.