Eggers Priklopnik Z Delovno Ploščadjo nakup rabljenega (27.899)

Stanje: novo, lastna masa: 4.400 kg, največja dovoljena obremenitev: 19.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, medosna razdalja: 8.795 mm, Oprema: ABS, | Krone AD Jumbo plato prikolica 3-osna Nova | Multilock zunanji okvir po celotni dolžini | Zračno vzmetenje spredaj in zadaj (dviganje/spuščanje) | Vrtljivo podvozje z krožno kroglo, nizko vzdrževalni vrtljivi venec | Vlečna ušesa 40 mm | BPW osi z bobnastimi zavorami | Nosilec za rezervno kolo | Dimenzije (D x Š x V): 8,60 x 2,48 x 0,93 m | Jeklena čelna stena 1,60 m | Medosna razdalja: 8.795 mm | Pnevmatike 12x spredaj/zadaj: 235/75 R 17,5 | Pridržujemo si pravico do napak, vnosov in predhodne prodaje. Cgsdpfjy H Ilzsx Al Hot

Stanje: rabljeno, največja dovoljena obremenitev: 29.037 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2017, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.916 mm, Leto izdelave: 2017, Oprema: ABS, KRONE SDP 27DA01CLNF 3-Axle FLATBED SEMI-TRAILER WITH TRIDEC STEERING AXLE (Linkage + Turntable) German Trailer | First Owner | Excellent Condition !! DIMENSIONS: - Total length: 13,860 mm - Height: 3,916 mm - Width: 2,550 mm - Load compartment length (internal): 13,620 mm - Load compartment width (internal): 2,480 mm - Fifth wheel height: 1,150 mm - Permissible total weight: 36,000 kg - Unladen weight: 6,963 kg EQUIPMENT: - 3x 9t BPW EcoPlus axles with disc brakes (430 mm) - Air suspension with raise/lower function including automatic ride height reset - 1st axle: lift axle - 2x wheel chocks with holders - Tyres: 6x 385/55 R22.5 approx. 85-95%, steel rims 11.75x22.5 ET120 - WABCO EBS EU brake system including vehicle stability system - Spring-loaded parking brake - EBS system 2S/2M, 2 sensors on one axle, diagnostics via ISO 7638 connector (EBS power cable) - Mechanical landing gear, 2 x 12 t, semicircular with base plate - Plastic single-wheel mudguards with suitable spray protection, EU-compliant Codpfjy I E Ddox Al Hsgt ELECTRICS: - 24-Volt lighting system with two 7-pin DIN ISO 1185/3731 sockets - 2x multifunctional rear lights EU-compliant, including rear fog and reversing lights - 2x LED licence plate lights - Socket for beacon (removable pole mount) - 3-pin rear socket for long vehicle light - 2x LED reversing lights - 2x LED perimeter lights - 2 LED contour lights with rubber arm - Side marker lights in LED design - 2 ECE70 warning plates at the rear - 2 sets overwidth signs including LED outline light front and rear BODY: - 30 mm thick, waterproof plywood floor, sealed all round, DIN EN 283 rated for floor loads up to max. 7,000kg forklift axle load - Steel front wall with robust corner posts, 2,000 mm high - Front wall reinforced inside with 9 mm phenolic plywood panel - Rear cross-member with delta steel impact profile PAINTWORK: - Steel parts shot-blasted, KTL-primed and powder-coated - Standard single-colour finish - Side/under-run protection and lighting brackets: white - Axles including hubs: RAL 9005, fittings black or galvanized - Rims: natural silver finish, outline marking according to ECE-R48 - Chassis: deep black - NOVAGRAU - Front wall: WHITE RAL 9011 - Rims: natural silver ACCESSORIES: - Stainless steel wheel trims - Closed pallet box for 24 Euro pallets - Stake rack left and right for 5+5 stakes - Square timber holder in front wall - Plastic toolbox with lock approx. 600x500 mm - 29 stake pockets for 80x80 mm stakes centerline & outer frame + 10 steel stakes left/right on frame - 12 pairs multi-lash lashing rings on MultiLock outer frame - TRIDEC FORCED STEERING (Rod and 2x turntable) wheelbase 1310/2050 mm - Central lubrication bar for Tridec steering rear - Mudflaps at rear under-run bar - Condition: Excellent for age and mileage - Delivery at extra cost possible All details without guarantee! Sale to business customers or EXPORT only! NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak: German, Czech, Polish, Romanian, Russian, English

Stanje: novo, največja dovoljena obremenitev: 30.540 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.990 mm, skupna širina: 2.550 mm, skupna višina: 1.010 mm, Leto izdelave: 2025, Oprema: ABS, SCHWARZMÜLLER 3-Axle Flatbed Semi-Trailer RH100 – Extendable – For building materials and construction machinery transport NEW VEHICLE Gross weight (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Empty weight approx. 9 t (+/- DIN tolerance) Flatbed length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Flatbed width approx. 2,540 mm Loading height front approx. 1,060 mm at coupling height approx. 980 mm, rear 1,010 mm Extendable lightweight steel welded frame construction Extension length approx. 4,000 mm, lockable at intervals of approx. 500 mm Cedpfxswfu N Ro Al Hsgt Reinforced version for building material transport, 20 t/5m at centre of gravity; construction machine transport up to 20 t (in retracted position) Reinforced U-profile outer frame 6 mm Tapered cross-members 4 mm Bevelled frame at rear, approx. 15°, approx. 500 mm Visual indicator for pneumatic frame locking on both sides, with green control lamp = indicator light for pneumatic frame locking at front left of the fifth wheel Energy guiding chain in central frame Frame locking with integrated lubrication strip 4 pairs of extendable 8 t lashing rings, rear 9 pairs of extendable 10 t lashing rings in outer frame profile, foldable outward on both sides for oversize cargo lashing 10 pairs of lashing mushrooms with welded round steel at lower edge of outer frame 6 pairs of insert sleeves with reinforcement bar for square tube side stanchions 80x50x5 mm (longitudinal, approx. 3 mm clearance), on both sides of outer frame 3 insert sleeve cross-members for side stanchions 80x80 mm, located at central cross-members Insert sleeve cross-members as empty holders for stanchions 6 pairs of sunken container locks for: 2 x 20 ft containers 1 x 20 ft container central 2 x 20 ft containers 1 x 30 ft container Reinforced rear end plate with continuous ramp hanger rail Mechanical 2 x 12 t landing legs, single-sided operation + compensation 2 drop support legs at rear SAF Intradisc B9 axles with 370 mm disc brakes (19.5" discs), Load capacity 9 t/axle, on-road specification Axle spacing 1,310 + 1,410 mm Wheelbase 7,650 mm SAF steering trailing axle with kingpin/bushing approx. 10° steering angle, automatic electro-pneumatic reverse lock, engages automatically in reverse, additional cab switch with release valve Special axle lift on 1st axle, automatic raise/lower depending on weight, with forced lowering, start assist via cab button / "3 x brake" Kilometre counter 6x tyres 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Brake system according to EC Directive 71/320 ECE R13 2-line air brake system, EBS system 2S2M, one axle with sensors RSS/RSP stability programme Spring-loaded parking brake Steel air tanks Air suspension with lifting and lowering device, total stroke approx. 200 mm Automatic ride height 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, package "BASIC" Axle load display via EBS CAN bus signal Tyre pressure monitoring according to ECE Regulation 141 35 mm wooden floor, longitudinal over wheels with steel checker plate cover Wooden floor impregnated both sides Reinforced steel front wall approx. 1,800 mm + centre supports integrated into front wall 2 lashing eyes top of corner posts Front steel corner posts integrated into front wall, front (clear side loading length) 24-volt lighting system according to EC Directive 76/756/EWG 2 units full-LED multifunction tail lights "Aspöck" with integrated control unit Flashing LED side marker

Stanje: novo, največja dovoljena obremenitev: 33.380 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Kässbohrer SPJ 3 Platform Semi-Trailer — Versatile | Robust | from €35,500 New vehicle — Individually configurable for your specific application. Robust platform semi-trailer designed for universal transport of various goods. Engineered for high payload, durable construction and maximum operational practicality. Highlights - Universal platform semi-trailer - High payload with stable frame construction - BPW axles with air suspension - EBS braking system with stability control - Versatile lashing and securing options - Ideal for construction, industrial, machinery, and general cargo transport Technical Data - Axles: 3 axles - Gross weight: 39,000 kg - Axle load: 27,000 kg - Fifth-wheel load: 12,000 kg - Platform length: depending on specification - Speed: 80 km/h - Chassis: air suspension with lifting/lowering function Standard Equipment - High-strength steel frame construction - Platform floor designed for high point and area loads - Multiple lashing points for load securing - BPW axles with drum brakes - WABCO / KNORR EBS brake system (2S/2M) - Electronic air suspension - LED lighting system according to EU regulations - Rear underrun protection as per ECE Included Options - Spare wheel holder - Toolbox - Side underrun protection - Lashing rings / points as required - Warning signs and reflectors in compliance with EU regulations - Preparation for additional superstructures or special solutions Cgsdpfx Asypa Dael Hst Additional equipment and individual customizations always possible — we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary by configuration.

Stanje: rabljeno, največja dovoljena obremenitev: 30.250 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2014, Oprema: ABS, Schwarzmüller Platform Flatbed Semi-Trailer with Lift Axle Permissible total weight: 36,000 kg Unladen weight: 5,750 kg Payload: 30,250 kg SAF axles 1st axle lift axle Air suspension Disc brakes Side underrun protection right, left, and rear 2x storage compartments right 1x storage compartment left Cgsdpfxowqyrhs Al Hot Rear rubber buffer 2x extendable oversize load signs front 2x extendable oversize load signs rear 2x crank support legs, operable from the right EBS (Electronic Braking System) ABS (Anti-lock Braking System) Perforated outer frame with approx. 100 mm hole spacing Wheelbase: approx. 6,350 + 1,310 + 1,310 mm External dimensions LxW: approx. 13,840 x 2,550 mm Loading area LxW: approx. 13,620 x 2,480 mm Front wall height: approx. 2,400 mm Loading height: approx. 1,250 mm Tyres: 385/65R22.5 Tread depth left front: 4 mm Tread depth left centre: 16 mm Tread depth left rear: 8 mm Tread depth right front: 5 mm Tread depth right centre: 15 mm Tread depth right rear: 10 mm Additional Features: Reinforced steel frame welded construction for point load 20 t over 4 m at centre of gravity, frame for ASH unladen 1,090–1,190 mm with air-suspended tractor unit, interchangeable 2" king pin (EC installation dimensions, corner spacing 2,040 mm) Perforated outer frame with approx. 100 mm hole spacing, elongated hole 40/25 mm according to DIN EN 12640 Air suspension with lifting and lowering device (approx. +120/-80 mm) Automatic ride height adjustment from 15 km/h SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, Ø 430 mm, 3 x 9 t rigid axles, wheelbase 2 x 1,310 mm Front axle automatically liftable = 2-side lift (1 x 96307) raises and lowers automatically based on weight (lifting the axle increases the loading or overall height by approx. 50 mm) with forced lowering including integrated speed-restricted starting aid for pushbutton operation in cab (without pushbutton fitted) 1 odometer (ECO-meter) (KIT no. 10801, with hubcap KIT no.: 52917) (on 2nd axle front right) Mechanical 2 x 12 t support winches, one-sided operation and load distribution mechanism Two-line brake system EBS-E – electronic braking system (Wabco 2S2M = one axle, 2nd axle monitored) RSS – roll stability support program Spring-loaded parking brake on 2 axles Aluminium air tank, unpainted 27 mm phenolic plywood flooring, flush with outer frame 2 steel hat profile rails over longitudinal beams, additional 12 mm phenolic overfloor, bevelled to outer frame Fixed aluminium hollow profile front wall 2,400 mm high with 2 centre supports

Stanje: rabljeno, največja dovoljena obremenitev: 29.480 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2016, Oprema: ABS, Kögel SN 24 ploščad z vstavnimi stebrički 3 osi, zaboj za palete, SAF osi, zračno vzmetenje z 2x dvižnimi osmi, kolutne zavore, ABS Nosilnost: 29.480 kg Cgodoy Euxfjpfx Al Hst

Stanje: rabljeno, največja dovoljena obremenitev: 36.300 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 03/2026, 24 months warranty from initial registration, hydraulically steered, NATO socket, central lubrication system, saddle height 1120 - 1300 mm, loading height 1340 - 1520 mm depending on saddle height, 10 t lashing rings in the outer frame spaced 1,200 mm, overlength sign, remote control, removable LED beacon, 220V socket, extension lights, 3-axle telescopic semi-trailer, extendable once up to 7,500 mm (in 500 mm steps), loading floor 28 mm hardwood, 10 t lashing rings in the outer frame (spacing 1,200 mm), stake pockets in the outer frame for stakes 81 x 51 mm, removable front wall made of steel, 1,800 mm high. Cgedpfxjmhd Ryo Al Hjt

Stanje: rabljeno, največja dovoljena obremenitev: 27.900 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2011, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, Bartoletti FD111S Platto dvižna os kolutne zavore Notr. št. za povpraševanja: 1225981 * ABS * EBS * 3 osi z zračnim vzmetenjem * Dvižna os * Kolutne zavore * BPW ECO PLUS osi * Škatla za shranjevanje na desni & levi strani / plastika Dolžina tovornega prostora: Dolžina: 13.000 mm * Širina: 2.500 mm Pnevmatike: 1. os: 385 / 65 R 22,5 30% zračno vzmetena / dvižna os 2. os: 385 / 65 R 22,5 30% zračno vzmetena 3. os: 385 / 65 R 22,5 30% zračno vzmetena ---Cena: 7.900,- EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ????? Pridržujemo si pravico do napak v pisanju, sprememb in vmesne prodaje. Codpfx Aox Uu E Dsl Hjgt

Stanje: rabljeno, največja dovoljena obremenitev: 2.150 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2022, skupna širina: 2.150 mm, skupna višina: 890 mm, Temared prikolica Vitlo 3 osi Prva registracija / leto izdelave: 17.02.2022 / Vrsta vozila: polprikolica Tip nadgradnje: platforma Cedoy Dyz Aopfx Al Hogt KBA št. (HSN/TSN): 1897//000 Barva laka: srebrna Število prejšnjih lastnikov: 1---- Vozilo ni pripravljeno! Dostava po celotni Nemčiji možna za doplačilo. Pridržujemo si pravico do napak in vmesne prodaje. Vaše vozilo z veseljem vzamemo v menjavo. Financiranje / leasing možno tudi brez pologa! Imate še vprašanja? Z veseljem vam svetujemo!

Stanje: novo, skupna masa: 3.500 kg, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.100 mm, velikost pnevmatike: 13, Leto izdelave: 2025, ANHÄNGERWIRTZ, tržište za preuzimanje vaših novih prikolica, nudi renomirane proizvođače! Preko 850 novih prikolica na lageru, više od 130 polovnih prikolica stalno u ponudi. Neobavezan primer: Variant mašinski transporter Variant Multitransporter 3563 UX 620x210x30 cm, 3800 kg, sa kočnicom, tandem visokoutovarivač, nisko šasija, 13" točkovi, kipovana platforma sa ručnom hidraulikom, aluminijumske stranice 30 cm preklopne, utovarna rampa kompletna visine 90 cm sa pomoćnim podizačem, DIN prstenovi za vezivanje na šasiji, automatski točak za podršku, moderna LED rasveta... Dostupno u raznim dužinama i konfiguracijama opreme. Trailershop vam nudi jedinstveni Roadster po fer ceni sa brzom isporukom. Novo vozilo, faktura sa iskazanim PDV-om, garancija od stručnog prodavca sa 35 godina iskustva. Cgjdpfsy Hrgpsx Al Hjt Autorska prava za slike, tekstove i logotipe 04.2026 VDK-3563UX30BLACK.

Stanje: rabljeno, največja dovoljena obremenitev: 600 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, prva registracija: 04/2025, dolžina tovornega prostora: 2.500 mm, širina tovornega prostora: 1.260 mm, višina nakladalnega prostora: 300 mm, skupna širina: 1.710 mm, skupna višina: 790 mm, Zabojni priklopnik je izdelan iz stabilne aluminijaste konstrukcije in obrabno odpornega lesenega poda. Pridržujemo si pravico do napak in vmesne prodaje. Cgodpoy A A Snjfx Al Hst

Stanje: rabljeno, največja dovoljena obremenitev: 2.775 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.530 mm, širina tovornega prostora: 1.650 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A15 GW26NG00315 Prevoznik gradbenih strojev proizvajalca STEMA, tip BMAT, skupna masa: 3.500 kg, nizkopodnožni priklopnik, vztrajnostna zavora, 100 km/h, z aluminijastimi rampami, 3,53 m x 1,65 m ...in še veliko več. Pridržujemo si pravico do napak in vmesne prodaje. Cgsdpjym Iftsfx Al Hst Višina nakladanja 500 mm

Stanje: rabljeno, največja dovoljena obremenitev: 2.775 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.530 mm, širina tovornega prostora: 1.650 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A15 GW26MG00273 Prevoznik gradbenih strojev, proizvajalec A, tip BMAT, skupna teža: 3.500 kg, nizkopodni priklopnik, s inercijsko zavoro, 100 km/h, z aluminijastimi rampami, 3,53 m x 1,65 m ...in še veliko več. Pridržujemo si pravico do napak in predhodne prodaje. Cjdpsym Ihzofx Al Hjgt

Stanje: rabljeno, največja dovoljena obremenitev: 2.186 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.005 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 200 mm, skupna širina: 2.035 mm, skupna višina: 2.130 mm, A45 GW26G000189, Transporter gradbenih strojev, proizvajalec STEMA, tip BMAT .2, Skupna masa: 2.700 kg, z jeklenimi nakladalnimi rampami, inercialna zavora, 100 km/h, 3,01 m x 1,40 m Cgjdsyqdqmjpfx Al Hot Vgrajeni blažilci za 100 km/h * Tandem nizek priklopnik, po izbiri z STEMA V-ojem ali centralno cevjo * Zvarjeno in v potopni kopeli vroče pocinkano podvozje iz masivne jeklene pločevine * Sprednja in stranske stene iz 3 mm debele varjene črne pločevine * 20 cm visoke zvarjene stranske stene * Celotno pohodno dno iz vezane plošče s protizdrsnim premazom (debeline 18 mm), po izbiri tudi dodatno aluminijasto rebrasto dno (debelina 3 mm) * Pohodna jeklena blatnika za enostavno vstopanje in izstopanje * 2 vzdolžna nosilca za optimalno porazdelitev tovora ... in še veliko več. Napake in vmesna prodaja pridržane.

Stanje: rabljeno, največja dovoljena obremenitev: 2.649 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 4.005 mm, širina tovornega prostora: 1.800 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A14 GW26GA00002 Prevoznik gradbenih strojev, proizvajalec STEMA, tip BMAT .2, skupna masa: 3.500 kg, nizkopodni priklopnik, z vztrajnostno zavoro, 100 km/h, s kovinskimi rampami, nagibni, 4 m x 1,80 m ...in še veliko več. Pridržujemo si pravico do napak in vmesne prodaje. Cjdpfxsym Ifaj Al Hegt

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper buffer * Mechanical drop-down supports at the rear ----Container / Low-bed platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roll grooves in the bogie area * When transporting roll-off containers, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking and mechanically insertable front stop angles in the running rails * Load securing certificate according to DIN 30722-1 Codpjpk D Awefx Al Hegt * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops fitted with pivoting stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surfacing in the running area of the access slope * 1 pair of aluminium loading ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height, loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape, side and rear * Axles, turntable, drawbar and air tank painted black * Hot-dip galvanized main frame ----Information: * Gross vehicle weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) Cgedpfxel Tpwye Al Hjt * Tire pressure monitoring system (RDÜ) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with raising and lowering function, equipped with Ride-to-Ride (RtR) valve * Smart-Board as infotool * Lateral underrun protection * Pivoting support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle with closed plastic mudguards, rear axle with straight hot-dip galvanized steel fenders, both with spray protection * Reflective contour marking strips on sides and rear * Folding cover (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye; height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side, each with 2 t lashing capability * Load securing package includes: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame—13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for up to 3 m overall width (not at the sloped rear end) * Widening planks stowed in the center of the load area * Hydraulic, one-piece, laterally adjustable ramps (approx. 3,000 x 720 mm) * Excavator arm rest, length approx. 2,100 mm from rear axle to end cross-member (2 pairs of 6.4 t lashing rings integrated on the sides of the excavator arm rest) * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp incline) * Chassis, turntable, drawbar, folding extensions, and ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross vehicle weight * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 32 / 2026 * Sample photos

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm, up to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on headboard * Side underrun protection Cedpfxjv Eq Evo Al Hogt * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fittings for retrofitting container locks in front of the headboard and rear slope for the transport of 20" containers * Bolted headboard, smooth sheet * Side walls: folding, split once in the middle, made of trapezoidal sheet metal * Steel rear wall, can be inserted between ramp holders, stored in front of the headboard when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various holes in headboard and end beam for 1.2 t lashing options * Profifix lashing rail in longitudinal axis, central, for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance) * Rear approach slope approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, headboard, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted in black * Side wall panels painted in a RAL colour of your choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS tyre pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Lateral underrun protection * Rear swing-down supports on chassis frame * Mechanically adjustable warning board kits front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with splash guards Cgedpol Thxdsfx Al Hot * Contour tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for toolbox mounted on turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), with integrated lashing options * Load securing package consisting of: 2 lashing points (6.4 t) front left & right on main beam of turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and lowerable, loadable in all directions and integrated into the outer frame—at corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in rear bevel) * Widening boards positioned in centre of loading area * Excavator arm trough over rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of excavator arm trough) * Single-piece hydraulic access ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofit of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tyres * Unladen weight 5,900 kg * Permissible gross weight of 30,000 kg technically possible * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 Cgodpoylfvmjfx Al Hst ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Lateral underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign kits front and rear * Front (closed) plastic mudguards and straight, galvanized steel panel mudguards at the rear, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical socket * Four stake pockets per side (no stakes included), each with integrated lashing points * Load securing package includes: 2 heavy-duty lashing rings (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV folding and retractable lashing rings, loadable in all directions and integrated into the outer frame (corners rated for 13.4 t and otherwise 10 t) * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) Cjdpfx Alox Ipb Hj Hogt * Widening planks stored in the center of the loading platform * Excavator arm rest above the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the excavator arm rest) * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable ramps (side shifting) * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach incline) * Chassis, bogie, drawbar, and loading ramps are hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * Technically permissible gross weight: up to 30,000 kg * The vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from approx. calendar week 36/2026 *

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle Cgedpfx Aljpk D I Ae Hot ----Delivery time: * Available from week 38/2026

Stanje: rabljeno, največja dovoljena obremenitev: 29.340 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2014, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.600 mm, Leto izdelave: 2014, Oprema: ABS, * Nemška prikolica iz prve roke, v zelo dobrem stanju * 1. in 3. os dvižna * Schmitz osi * Galvaniziran okvir * Stranice, stebri, pritrdilne ušesce * Pnevmatske gume 385/65 pribl. 80% * WhatsApp: Csdpfsyr A Awex Al Hjgt * Poljski kontakt, ????? ?????: * Prodaja samo za podjetja brez garancije, vse informacije brez garancije, pridržujemo si pravico do predčasne prodaje

Stanje: rabljeno, največja dovoljena obremenitev: 34.840 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.550 mm, Oprema: ABS, KÄSSBOHRER K.SPA.M3, MEGA TELESCOPIC PLATFORM 7M IMMEDIATE AVAILABILITY!!! IN STOCK!!! Technical Information: * Fifth wheel height: 950 mm * Overall length: 13,535 mm * Gooseneck length: 4,285 mm * Platform length: 8,950 mm * Extension: 6,900 mm platform extension – TELESCOPIC * Extension lock positions: 500 mm * Gooseneck height: 120 mm * Platform height (loaded): 1,040 mm * Wheelbase: 7,700 mm * Overall width: 2,550 mm * Technical gross weight (80 km/h): 45,000 kg * Technical gross weight (60 km/h): 46,000 kg * Unladen weight: 10,160 kg Chassis: * BPW axles with air suspension and disc brakes * 2x fixed front axles, 1x self-steering trailing axle at rear * Air suspension with load gauge * 1st axle liftable * Wabco braking system * Tyres: 445/45 R19.5 (6+1) * E-wheel * 1x spare wheel holder Structure: * Chassis made from high-quality, high-strength S700 MC steel * 30 mm hardwood floor * 8x2 extendable side extensions up to 300 mm * Telescopic support winch in front with 50t capacity * Mechanically foldable rear supports with 45t capacity Ramps: * Ramp brackets at the rear of the vehicle Load Securing: * Lashing rings * Stake pockets * Container locks suitable for 1x20 ft, 2x20 ft, 1x40 ft, 1x45 ft * Front wall made of steel material 1,500 mm high with Code-XL certificate Accessories: * 1x steel toolbox (1,500 x 480 x 450 mm) * Stanchion box at the front wall with 18 storage positions Cgedpfxsvm I Azs Al Het * Storage box for mounting under the chassis * 2 x 2 extra wide marker boards with LED lighting * Beacon Chassis color: RAL 3020 signal red

Stanje: novo, največja dovoljena obremenitev: 34.840 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, KÄSSBOHRER K.SPA.M3, MEGA TELESCOPIC PLATFORM 7M IMMEDIATE AVAILABILITY!!! IN STOCK!!! Technical Information: * Fifth wheel height: 950 mm * Overall length: 13,535 mm * Gooseneck length: 4,285 mm * Platform length: 8,950 mm Cgodpfx Alsvm I Hyj Hst * Extension: 6,900 mm platform extension – TELESCOPIC * Extension lock positions: 500 mm * Gooseneck height: 120 mm * Platform height (loaded): 1,040 mm * Wheelbase: 7,700 mm * Overall width: 2,550 mm * Technical gross weight (80 km/h): 45,000 kg * Technical gross weight (60 km/h): 46,000 kg * Unladen weight: 10,160 kg Chassis: * BPW axles with air suspension and disc brakes * 2x fixed front axles, 1x self-steering trailing axle at rear * Air suspension with load gauge * 1st axle liftable * Wabco braking system * Tyres: 445/45 R19.5 (6+1) * E-wheel * 1x spare wheel holder Structure: * Chassis made from high-quality, high-strength S700 MC steel * 30 mm hardwood floor * 8x2 extendable side extensions up to 300 mm * Telescopic support winch in front with 50t capacity * Mechanically foldable rear supports with 45t capacity Ramps: * Ramp brackets at the rear of the vehicle Load Securing: * Lashing rings * Stake pockets * Container locks suitable for 1x20 ft, 2x20 ft, 1x40 ft, 1x45 ft * Front wall made of steel material 1,500 mm high with Code-XL certificate Accessories: * 1x steel toolbox (1,500 x 480 x 450 mm) * Stanchion box at the front wall with 18 storage positions * Storage box for mounting under the chassis * 2 x 2 extra wide marker boards with LED lighting * Beacon Chassis color: RAL 3020 signal red