Böckmann Dk 3218/350 Alu Dreiseitenkipper 3,5 T E-Pumpe nakup rabljenega (66.100)

Stanje: rabljeno, največja dovoljena obremenitev: 2.510 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2022, naslednji pregled (TÜV): 06/2028, dolžina tovornega prostora: 3.240 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 350 mm, skupna širina: 1.970 mm, skupna višina: 1.110 mm, Leto izdelave: 2022, Böckmann DK 3218/350 Alu * Prikolica z visokimi stranicami * Trestranski kiper * 1. lastnik * Datum prve registracije: 09.08.2022 * Tehnični pregled: 06/2028 * Skupna masa: 3500 kg * Nosilnost: 2510 kg * Lastna masa: 990 kg * Zunanje mere: 4890 mm x 1970 mm x 1110 mm * Notranje mere: 3240 mm x 1800 mm x 350 mm * 100 km/h – odobreno * V-oblika vlečne naprave * Podvozje in kiper toplotno pocinkani * Električna črpalka z ročno črpalko za nujne primere * Večfunkcijska razsvetljava * Stranske stene iz aluminija, v celoti odstranljive * Zadnja vrata, možnost nihanja * Ojačitve za pritrditev tovora * Samodejno podpiralno kolo * Reža za les * 13-polni vtič POZOR!!!!! OBVEZNO PREBERITE!!!!! Izrecno si pridržujemo pravico do vmesne prodaje, saj ta artikel ponujamo tudi na drugih platformah. Priporočamo, da artikel pred nakupom pregledate in preizkusite, da se izognete napačnim pričakovanjem glede njegovega stanja in primernosti. Pregledi in preizkusi so možni kadar koli po dogovoru in so izrecno zaželeni!!! Pridržujemo si pravico do sprememb in tiskarskih napak! Podatki brez jamstva! Navedene notranje mere so približne. Pri novih vozilih lahko nastanejo dodatni stroški za transport in dokumentacijo. MOŽNOSTI ZA ODPLAČILO ZA SKORAJ VSE!!! MOŽNOSTI ZA IZMENJAVO IN ODPLAČEVANJE V OBROKIH!!! Razstavni prostor: 58285 Gevelsberg, Am Sinnerhoop 17 Odpiralni čas: ponedeljek – petek od 8.30 do 17.00, sobota od 8.30 do 14.00 Stalno več kot 500 novih in rabljenih prikolic na zalogi!!! Fjdjzkquqopfx Abqegd Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Faks:

Stanje: novo, Three-way tipper with electric pump Manufacturer: Böckmann Model: DK-AL 3218/30 P Internal dimensions: 3240 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 3000 kg Unladen weight: approx. 957 kg Payload: approx. 2043 kg (payload may vary depending on equipment and construction) Tyres: 13 inch Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Automatic jockey wheel Removable steel corner posts Removable side panels Swing tailgate 8 sturdy, rattle-free lashing brackets Fgedpfx Ajy I Em Sebqsd Safety support for fixing the tipping body during maintenance Robust cam latches on the side panels Plastic mudguards at the rear incl. mud flaps Durable anti-slip phenolic floor panel with galvanized steel plate base for high point loads 2 large wheel chocks Front marker lights Folding front wall for transporting longer materials V-drawbar Heavy-duty net hooks fitted laterally under the load area Including vehicle documentation Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h approval 300 mm side mesh extension, tilting on 3 sides Perimeter net hooks mounted on sidewalls Additional 350 mm side panel extension Aluminium loading ramps, 2.7 t load capacity Toolbox mounted on front wall or under load floor Load securing net Flat tarpaulin in various colours Registration of your new trailer with the vehicle registration authority

Stanje: novo, Three-way Tipper Trailer with Electric Pump Manufacturer: Böckmann Model: DK-AL 3218/30 Internal dimensions: 3240 x 1800 x 350 mm (L x W x H) Permissible total weight: 3,000 kg Unladen weight: approx. 955 kg Payload: approx. 2,045 kg (actual payload may vary depending on equipment and build specifications) 14-inch tyres Electric hydraulic pump with battery (12V/88Ah) and manual emergency pump Automatic jockey wheel Removable steel corner posts Integrated rail channel in upper frame (easy retrofitting of loading ramps) Removable sideboards 4 robust, rattle-free lashing rings Safety support for securing the tipping body during maintenance Drop-down front wall Heavy-duty lever locks on sideboards Plastic rear mudguards including mud flaps Fgsdpoy Napksfx Abqjd Durable phenolic plywood floor with galvanized steel plate for high point loads 2 large wheel chocks Front position marker lights Drop-down front wall for transporting longer materials V-drawbar Heavy-duty side net hooks under the load area Including vehicle documents Optional extras and accessories for this trailer: Shock absorbers incl. 100 km/h approval Tailboard with pendulum function (shown in the pictures, not included as standard—optional accessory) Mesh side extension, three-sided, pendulum-mounted, 600 mm Continuous net hooks mounted around the sideboard Additional 350mm sideboard extension Aluminium loading ramps with 2.7 t capacity Toolbox fitted to the front wall or under the load area Load securing net Flat cover available in various colours Registration of your new trailer with the vehicle licensing authority We are happy to show you flexible monthly financing options for your new trailer and can provide a personalised financing offer. We have over 2,000 trailers in stock at all times. You can find a large selection of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Please note: Illustrations may show accessories not included in the standard delivery. Due to ongoing product improvements, illustrations and technical data may vary slightly. Errors and changes reserved!

Stanje: novo, Böckmann Three-Way Tipper - ECO - Special model with side wall extension - No hidden charges with us! Freight and vehicle documents are included in the sales price! - Manufacturer: Böckmann Type: DK-AL 3218/27 P Eco Internal dimensions: 3240 x 1800 x 700 mm (LxWxH) Gross vehicle weight: 2,700 kg Unladen weight: approx. 935 kg Payload: approx. 1,765 kg (payload may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88h) and emergency hand pump Magnetic wired remote control with flexible spiral cable for electric pump; can adhere anywhere on the frame Emergency battery master switch AL-KO heavy-duty automatic jockey wheel Aluminium sideboards Sideboard extension 350 mm Removable steel corner stanchions Removable sideboards Folding front board for transporting longer materials Rear swinging tailgate Integrated access flap for loading ramps at the rear Integrated securing rail at the rear for attaching ramps Welded and hot-dip galvanized frame and tipping platform for increased stability, torsional rigidity, and tilt resistance 6 robust, rattle-free lashing rings in the side rail (load capacity 500 kg) Integrated holes in the lateral frame profile for easy retrofitting of additional lashing points 14" tyres ensure high ground clearance Safety support for fixing the tipper platform during maintenance Robust over-centre latches on the sideboards Plastic mudguards, rear including mud flaps Dimensionally stable combination floor – continuous phenolic plywood reinforced with galvanized steel floor for high point loads and impact resistance Front marker lights Fjdpfx Aey I N Dnebqogd 2 large wheel chocks Bolted V-drawbar Protected battery and entire electronics housed in splash-proof box Hydraulic hoses securely routed in longitudinal beam Includes vehicle documents Possible additional options and accessories for this trailer: - Ramp compartments incl. aluminium loading ramps - Crank supports - Charger for tipper with electric pump and adapter - Mesh extension (600 mm or 1000 mm) - Load securing net - Net hooks mounted all around the sideboard - Additional side wall extension 350 mm - Toolbox or storage box mounted to front wall or under loading bed - Flat tarpaulin in various colours - Shock absorbers incl. certificate for 100 km/h approval - Custom tarpaulin superstructure - Registration of your new trailer at the motor vehicle registration office

Stanje: novo, Böckmann Three-way Tipper No hidden costs with us! Freight and vehicle documents are included in the sales price! Manufacturer: Böckmann Model: DK-AL 3218/35 P Eco Internal dimensions: 3240 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: 1,045 kg Payload approx. 2,455 kg (payload specifications may vary depending on equipment and construction) Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Magnetic cable remote control with flexible coiled cable for the electric pump adheres anywhere on the frame Emergency battery disconnect switch ALKO heavy duty automatic jockey wheel Aluminium side walls Removable steel corner posts Removable side panels Folding front wall allows transport of longer materials Rear pendulum tailgate Integrated access ramp flap at the rear Integrated securing rail for attaching access ramps at the rear Welded and hot-dip galvanized frame and tipping body provide increased stability, torsional rigidity, and tipping resistance 4 robust, rattle-free lashing rings (load capacity 500 kg) (contrary to images) Integrated holes in the side frame profile for easy retrofitting of additional lashing points 14" tires ensure high ground clearance Safety support to secure the tipper body for maintenance Sturdy toggle locks on the side panels Plastic mudguards, rear incl. mudflaps Dimensionally stable combination floor - continuous phenolic plywood reinforced with galvanized steel for high point loads and impact resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Protected compartment for battery and all electronics in a splash-proof box Fgjdpfx Absy I N Adeqed Hydraulic hoses safely routed within the longitudinal frame Including vehicle documents Possible additional options and accessories for this trailer: - Ramp compartments incl. aluminium access ramps - Wind-down supports - Charger for tipper with electric pump and adapter - Mesh extension (600 mm or 1,000 mm) - Side wall extension - Load securing net - Net hooks mounted all around on the side walls - Additional side wall extension 350 mm - Toolbox or storage box mounted on the front wall or under the platform - Flat tarpaulin in various colours - Shock absorbers incl. 100 km/h type approval - Custom tarpaulin structure - Registration of your new trailer with the vehicle registration office

Stanje: novo, Böckmann Three-Way Tipper – ECO – Special Edition - No hidden costs with us! Freight and vehicle documents are included in the sales price! - Manufacturer: Böckmann Model: DK-AL 3218/27 P Eco Internal dimensions: 3240 x 1800 x 350 mm (LxWxH) Permissible total weight: 2700 kg Unladen weight: approx. 935 kg Payload: approx. 1765 kg (Payload varies depending on equipment and construction) Electric hydraulic pump with battery (12 V/88h) and emergency hand pump Magnetic cable remote control with flexible coiled cable for E-pump attaches anywhere on the chassis Emergency stop battery isolator switch AL-KO heavy-duty automatic jockey wheel Aluminium drop sides Removable steel corner stanchions Removable drop sides Folding front panel allows for transport of longer materials Rear swinging tailgate Integrated access hatch for loading ramps at the rear Fsdey I Nxfepfx Abqjgd Integrated securing bar for hooking in ramps at the rear Welded and hot-dip galvanised frame and tipping platform ensure increased stability and resistance to torsion and tipping 6 sturdy, rattle-free lashing eyes in the side panel (pulling force 500 kg) Integrated holes in the side frame profile for easy retrofitting of additional lashing points 14" tyres ensure high ground clearance Safety support for securing the tipping platform during maintenance Robust lever locks on the drop sides Plastic mudguards at the rear incl. mud flaps High-strength combination floor – continuous phenolic plywood reinforced with galvanised steel for high point loads and impact resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Protected housing for battery and all electronics in a splash-proof box Hydraulic hoses safely routed inside the longitudinal chassis member Incl. vehicle documents Available options and accessories for this trailer: Ramp tunnels including aluminium loading ramps Telescopic supports Battery charger for tipper with E-pump and adapter Mesh extension (600 mm or 1000 mm) Drop side extension Cargo securing net Net hooks mounted around the drop sides Additional 350 mm side extension Toolbox or storage box mounted to the front wall or under the loading area Flat tarpaulin in various colours Shock absorbers incl. 100 km/h approval certificate Custom canopy build-up Registration of your new trailer at the vehicle registration authority We are happy to show you how to finance your new trailer with convenient monthly payments and can provide you with an individual financing offer. We always have more than 2,000 trailers in stock. You can find many of our trailers online or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show accessories not included in the standard scope of delivery. Due to continuous technical development, illustrations and technical data may vary slightly. Errors and changes excepted!

Stanje: novo, Three-way tipper with electric pump Manufacturer: Böckmann Model: DK-AL 3218/30 Internal dimensions: 3240 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 3,000 kg Unladen weight: approx. 957 kg Payload: approx. 2,043 kg (payload may vary depending on equipment and build) Tyres: 14 inch Electric hydraulic pump with battery (12 V/88Ah) and emergency manual pump Automatic jockey wheel Fsdpfxsy I I Ils Abqsgd Removable steel corner stanchions Removable side panels Swing tailgate 8 sturdy, rattle-free lashing brackets Safety support for securing the tipper bed during maintenance Robust lever locks on the side panel Plastic rear mudguards including mud flaps Heavy-duty phenolic plywood floor with galvanised steel plating for high point loads 2 large wheel chocks Front marker lights Fold-down front panel for transporting longer materials V-drawbar Sturdy mesh hooks mounted laterally under the loading platform Incl. vehicle documents Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Three-sided mesh extension, foldable on all sides, 600 mm high Mesh hooks all around the side panel Additional side panel extension, 350 mm high Aluminium loading ramps, 2.7 t capacity Toolbox mounted on the front panel or under the load area Load securing net Flat tarpaulin in different colours Registration of your new trailer at the vehicle registration office

Stanje: novo, Special offer – Stock vehicle from 2022 – Never registered! Böckmann Three-way Tipper with Electric Pump and Steel Sidewalls Manufacturer: Böckmann Model: DK-ST 3218/30 P Internal dimensions: 3240 x 1800 x 400 mm (L x W x H) Gross vehicle weight: 3,000 kg Unladen weight approx. 1,055 kg Payload approx. 1,945 kg (payload figures may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Wired remote control for electric pump Battery charging interface incl. cable 14-inch tires Automatic jockey wheel (the heavy-duty automatic jockey wheel shown in the photos is only available on the 3.5 t version) Extra sturdy, hot-dip galvanized steel sidewalls, 400 mm Removable steel corner posts Removable sidewalls Track channel in upper frame (easy retrofit for loading ramps) Rear tipping tailgate Fedpjy I E R Refx Abqjgd 4 stable, rattle-free lashing rings Safety prop to secure tipping body during maintenance Foldable front panel allows transport of longer materials Robust lever fasteners on sidewalls Plastic mudguards at rear incl. mud flaps Durable phenolic plywood floor panel with galvanized steel bottom sheet for high point loads 2 large wheel chocks Front marker lights V-drawbar Sturdy net hooks on both sides underneath the loading area Incl. vehicle documents Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h approval 3-sided mesh extension, foldable, 600 mm Continuous net hooks fitted along sidewalls Additional sidewall extension 350 mm Aluminum loading ramps, 2.7 t capacity Toolbox mounted on front wall or under loading area Load securing net Flat tarpaulin available in various colours

Stanje: novo, Three-way tipper with electric pump and 600 mm mesh extension Manufacturer: Böckmann Model: DK-AL 3218/35 Internal dimensions: approx. 3240 x 1800 x 950 mm (LxWxH) Permissible total weight: 3500 kg Unladen weight: approx. 1118 kg Payload: approx. 1382 kg (Payload figures may vary depending on equipment and configuration) Tyres: 14 inch Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Leaf mesh extension, 600 mm high, swinging on three sides Load securing net Automatic jockey wheel Removable steel corner stanchions Removable side panels Swing tailgate 4 robust, rattle-free lashing rings Safety support for securing the tipper bed during maintenance Heavy-duty angle lever locks on side panels Plastic rear mudguards incl. mudflaps Fgjdpfey I Eqdex Abqjd Durable anti-slip screen-printed floor panel with galvanized steel plate for high point load capacity 2 large wheel chocks Front position lights Fold-down front panel for transporting longer materials V-drawbar Sturdy net hooks mounted laterally under the loading platform Including vehicle documents Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h road approval Continuous net hooks mounted on the side walls Additional side wall extension, 350mm Aluminium ramps, 2.7 t load capacity Toolbox mounted on front panel or under loading platform Flat tarpaulin in various colors Registration of your new trailer with the vehicle registration office

Stanje: novo, Three-way tipper with electric pump and 600 mm steel side extension Manufacturer: Böckmann Model: DK-AL 3218/35 P Internal dimensions: approx. 3240 x 1800 x 950 mm (L x W x H) Permissible total weight: 3,500 kg Unladen weight: approx. 1,118 kg Payload: approx. 2,339 kg (payload may vary depending on equipment and design) Tyres: 14-inch Electric hydraulic pump with battery (12V/88Ah) and emergency hand pump 3-sided 600 mm steel side extension, pendulum-mounted Load securing net Automatic jockey wheel Removable steel corner stanchions Removable side panels Drop-side tailgate 4 robust, rattle-free lashing rings Safety support strut for securing the tipper body during maintenance Robust angle lever locks on side panels Plastic mudguards at the rear incl. mud flaps Durable phenolic resin-coated plywood floor with galvanized steel sheet for high point load capacity Fgodpfx Asy I Efbebqsd 2 large wheel chocks Front position lights Fold-down front panel for transporting longer materials V-drawbar Robust net hooks along the sides under the loading area Including vehicle documents Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Net hooks mounted all round on the side panels Additional 350 mm side extension Aluminium loading ramps with 2.7 t load capacity Toolbox mounted on the front panel or under the loading area Flat cover in various colours Registration of your new trailer at the road traffic authority

Stanje: novo, lastna masa: 1.015 kg, največja dovoljena obremenitev: 2.485 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.855 mm, višina nakladalnega prostora: 350 mm, Leto izdelave: 2025, prevoženi kilometri: 50 km, vrsta prenosa: mehanski, energetska učinkovitost: A, Humbaur HTK 3500.37 Three-Way Tipper Car Trailer Condition: New (Year of Manufacture: 2025) 2 years main inspection from the date of first registration Incl. registration documents (vehicle registration certificate part II and certificate of conformity) Available from: Approx. 6 weeks after receipt of order (non-binding) Financing available through our partner banks! Technical Data Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,015 kg Payload: approx. 2,485 kg Number of axles: 2 Internal loading length: 3,630 mm Internal loading width: 1,855 mm Internal loading height: 350 mm Brake type: Braked, overrun brake Chassis: platform trailer (wheels under body), rubber spring axles Electrics: 12V, 13-pin plug Tire size: 195/50 R13 Optional Equipment None Features Tipping function by hydraulic pump (electric / electric pump) Emergency hydraulic pump (mechanical / hand pump) Ramp channels Steel floor plate Aluminum side walls Foldable and removable side walls Tailgate can be used as drop or swing tailgate Automatic jockey wheel Lashing eyes Frame welded and hot-dip galvanized V-drawbar AL-KO or Knott axles and brake system Accessories (subject to additional charge) 100 km/h certificate incl. retrofit 4x shock absorbers Aluminum loading ramps Fodew Tn Arspfx Abqegd Aluminum side extension, 60cm high Aluminum side wall extensions, 35cm or 60cm Aluminum wheels silver / black Support stands Trailer net Trailer lock Bluetooth receiver for electric pump Flat tarpaulin H-frame Height-adjustable drawbar Mesh side extension, 60cm or 100cm Tarpaulin and hoops, 180cm or 200cm Wheel set 185 R14C Spare wheel 195/50 R13 including holder Tractor connection for hydraulic pump Lashing strap Steel side wall extensions 35cm Nationwide delivery in Germany Nationwide registration in Germany Temporary registration plates (valid for 5 days) Note Weights may vary depending on equipment. Errors, interim sale, and changes reserved! Condition, roadworthiness: roadworthy, warranty: manufacturer's vehicle warranty

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 2700.27 Permissible total weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Bed dimensions: 2670 x 1500 x 350 mm Tyres: 13-inch Loading height: 725 mm Load platform hydraulically tipable via manual pump Tipping angle: rear 45°, sides 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chrome tipping cylinder - Electric pump with emergency hand pump - 13-pin connector and reversing lights - Side panels made of powder-coated, galvanized steel, fully removable - Rear tailgate can be swung - 6 lashing rings mounted on the bed, each with 800 kg load capacity, Dekra certified - Jockey wheel - Lashing trough preinstalled for optional aluminum floor inserts – easy to retrofit Price includes vehicle registration documents (registration certificate Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. You can request a free temporary number plate for transport. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. We accept no responsibility for mistakes or typographical errors. Fgsdpfori Tb Aox Abqed Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, galvanized steel panels, braked, includes warranty, V-drawbar hot-dip galvanized, chassis and tipper platform hot-dip galvanized, single piece steel tipper platform, 4-stage hard-chrome tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reversing lights, powder-coated fully removable side panels, swing rear tailgate, 6 lashing rings mounted in bed rated to 800 kg each (Dekra certified), preinstalled trough for easy retrofitting of aluminum floor inserts.

Stanje: novo, največja dovoljena obremenitev: 2.440 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.240 mm, širina tovornega prostora: 1.800 mm, ANHÄNGERWIRTZ, spletna točka za prevzem vaših novih prikolic, ponuja močne blagovne znamke! • Več kot 850 novih prikolic na zalogi • Več kot 130 rabljenih prikolic stalno v ponudbi Nezavezujoč primer: Rubrika tristranski kiper – nakup le do razprodaje zalog! Böckmann Kiper DK AL 3218/35 Profi Elektro + NHP 3500 kg Tristranski kiper DK-AL 3218/35 Profi E 324x180x35 cm 3500 kg ALKO tandem visokonaložna šasija V, aluminijaste stranice z ročnimi kotnimi zapirali – zložljive in snemljive na vseh štirih straneh, jeklena pločevina na tovornem dnu, elektrohidravlično nagibanje z lastno baterijo, ročna črpalka za nujne primere, varnostna zaustavitev, 2+2 vgrajeni DIN pritrdilni obročki brez ropota, masivno avtomatsko podporno kolo ... 😊 Novo Prodaja 24/7 prek naše spletne trgovine na trailershop Fgsdpfx Aszii E Esbqjd Sprejem naročil po telefonu: PON – 08.00 do 12.30 in 14.00 do 18.00 ali 24/7 prek naše spletne trgovine na trailershop Vsebine in slike so avtorsko zaščitene – logotipi registrirane blagovne znamke 07/26 Proizvajalec: Böckmann Fahrzeugwerke GmbH Št. artikla: 1141164 Možnost financiranja Način dostave: pošiljanje s špedicijo

Stanje: novo, Böckmann Three-Way Tipper No hidden costs with us! Freight and vehicle documents are included in the sale price! Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 3500 kg Unladen weight: 1047 kg Payload approx. 2453 kg (payload may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Magnetic cable remote control with flexible coiled cable for the electric pump, attaches anywhere on the frame Emergency-stop battery isolator switch ALKO heavy-duty automatic jockey wheel Aluminium side panels Removable steel corner posts Removable side panels Folding front panel enables transport of longer materials Rear hinged tailgate Integrated extraction hatch for loading ramps at the rear Integrated securing rail at the rear for inserting loading ramps Welded and hot-dip galvanized frame and tipping platform for increased stability, torsional rigidity, and tilt resistance 4 robust, rattle-free lashing rings (pulling force 500 kg) (varying from pictures) Integrated holes in the side frame profile for easy retrofitting of additional lashing points 14" tires ensure high ground clearance Safety support strut to secure the tipping platform during maintenance Heavy-duty cam-style locks on side panels Fgjdpfx Abszaxx Rjqsd Plastic rear wheel arches incl. mud flaps Dimensionally stable combination floor – continuous phenolic plywood reinforced with galvanized steel base for high point-loading and impact resistance Front position marker lights 2 large wheel chocks Bolted V-drawbar Protected battery and electronics installation in a splash-proof housing Hydraulic hoses routed safely within the main frame rails Including vehicle documents Options and accessories available for this trailer: Ramp channels incl. aluminium loading ramps Crank support legs Charger for tipper with electric pump and adapter Mesh side extension (600mm or 1000mm) Side wall extension Load securing net Continuous net hooks mounted on side panels Additional 350mm side wall extension Toolbox / storage box mounted at front wall or under the load bed Flat tarpaulin in various colors Shock absorbers incl. 100 km/h approval certificate Custom tarpaulin structures Registration of your new trailer at the vehicle registration office

Stanje: novo, Böckmann Three-Way Tipper with Electric Pump and Steel Side Panels – Professional Version Manufacturer: Böckmann Model: DK-ST 3718/35 P Internal dimensions: 3740 x 1800 x 400 mm (L x W x H) Permissible total weight: 3,500 kg Unladen weight: approx. 1,170 kg Payload: approx. 2,330 kg (Payload may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for E-pump, attaches anywhere on the frame Emergency battery disconnect switch ALKO heavy-duty automatic jockey wheel Extra robust, hot-dip galvanized steel side panels, 400 mm high Removable steel corner posts Removable side panels Foldable front wall enables transport of longer materials Rear swinging tailgate Integrated extraction hatch for loading ramps at the rear Integrated securing bar for attaching ramps at the rear Welded and hot-dip galvanized chassis and tipping body for enhanced stability, torsional rigidity, and tipping resistance 4 sturdy, rattle-free lashing rings (pulling force 500 kg each) Integrated openings in the side frame profile for easy retrofitting of additional lashing eyes 14-inch tyres ensure excellent ground clearance Safety stay for securing the tipper bed during maintenance Heavy-duty toggle latches on the side panels Plastic mudguards at the rear, including mud flaps Dimensionally stable combi floor – continuous anti-slip phenolic plywood reinforced with galvanized steel for high point-load capacity and impact resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Protected housing for battery and entire electronics in a splash-proof box Fgodpfxjy Na Tpo Abqjd Hydraulic hoses securely routed within longitudinal frame member Incl. vehicle documents Possible additional options and accessories for this trailer: Ramp compartments incl. aluminium loading ramps Crank supports Battery charger for tippers with electric pump and adapter Mesh extension (600 mm or 1,000 mm) Side panel extension Cargo securing net Perimeter net hooks mounted to side panel Additional 350 mm side panel extension Toolbox or storage box mounted to front wall or under the load platform Flat tarpaulin in various colours Shock absorbers incl. 100 km/h certificate Custom tarpaulin superstructure For individual or tailored financing solutions, just contact us! Over 1,500 trailers available at the Anhänger-Centrum Rosemeier. Come and have a look. We’ll be happy to advise you. Images may show optional equipment not included in standard delivery. Due to continuous improvements, images and technical data may vary slightly. Subject to errors and changes!

Stanje: novo, Böckmann Three-Way Tipper with Electric Pump, Mesh Extension, and Steel Drop Sides in Professional Spec Manufacturer: Böckmann Model: DK-ST 3718/35 P Internal dimensions: 3740 x 1800 x 965 mm (L x W x H) Fgedpfxjy Na R Ie Abqjd Gross vehicle weight: 3500 kg Unladen weight: approx. 1170 kg Payload: approx. 2330 kg (payload may vary depending on equipment and configuration) Mesh extension (600 mm or 1000 mm) Electric hydraulic pump with 12 V/88 Ah battery and emergency hand pump Magnetic remote control with flexible coiled cable for the e-pump can be attached anywhere on the frame Emergency battery cutoff switch AL-KO heavy-duty automatic jockey wheel Extra sturdy hot-dip galvanized steel drop sides, 400 mm high Removable steel corner posts Removable drop sides Folding front panel allows transport of longer materials Swing tailgate at rear Integrated ramp access hatch at the rear Integrated securing rail for hanging access ramps at the rear Welded and hot-dip galvanized frame and tipping body for enhanced stability, torsion and tipping resistance 4 heavy-duty, rattle-free lashing rings (pulling force 500 kg) Integrated holes in the side frame profile for easy retrofitting of additional lashing points 14-inch tyres for increased ground clearance Safety prop for fixing the tipper body during maintenance Robust cam locks on dropsides Rear plastic mudguards with mud flaps Dimensionally stable combination floor – continuous phenolic plywood panel reinforced with galvanized steel for high point loads and shock resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Battery and complete electronics housed in a splash-water protected box Hydraulic hoses conveniently routed inside longitudinal members Including vehicle documents Available options and accessories for this trailer: Ramp storage compartments including aluminium loading ramps Crank supports Charger for tipper with electric pump and adapter Drop side extension Load securing net Net hooks around the drop side Additional drop side extension 350 mm Toolbox/storage box mounted at the front panel or under the bed Flat tarpaulin in various colours Shock absorbers incl. 100 km/h homologation certificate Custom-made tarpaulin structures For bespoke and tailored financing, please contact us directly! Over 1,500 trailers available at Anhänger-Centrum Rosemeier. Visit us for more options. Our team is happy to advise you. Images may show optional equipment not included in standard delivery. Due to ongoing development, images and technical data may vary slightly. Subject to errors and changes.

Stanje: novo, Böckmann Three-Way Tipper – ECO – Special Model - No hidden costs with us! Freight and vehicle documents are included in the sales price! - Manufacturer: Böckmann Type: DK-AL 3016/30 Eco Internal dimensions: approx. 3060 x 1650 x 300 mm (L x W x H) Perm. total weight: 2700 kg Unladen weight: approx. 750 kg Payload: approx. 1950 kg (payload may vary depending on equipment and configuration) Base frame and steel profile substructure hot-dip galvanized Extreme stability, torsion and tilt resistance thanks to continuous longitudinal beams in the upper structure Hydraulic tilting with hand pump Safety support Non-interchangeable locking pins Pre-installed track bed under the superstructure allows for retrofitting rail angle profiles and rails Side panels in aluminium, anodised Removable steel corner posts 4 recessed, rattle-free lashing rings in the side panel Foldable front wall Rear plastic mudguards 14-inch tires Steel rims Incl. vehicle documents Fodpfx Abey Na Adoqsgd Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Electric hydraulic pump with battery (12 V/88H) and emergency hand pump 3-sided leaf mesh extension, 600 mm, swinging Net hooks circumferentially mounted on the side wall Additional side wall extension, 350 mm Loading ramps Toolbox mounted on the front wall or under the loading bed Load securing net Flat tarpaulin in various colors Registration of your new trailer with the road traffic authority We would be happy to show you how to finance your new trailer in convenient monthly installments and create a customized financing offer for you. We have more than 2,000 trailers permanently in stock. You can find many of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Illustrations may show accessories not included in the standard scope of delivery. Due to ongoing product development, illustrations and technical data may vary slightly. Subject to errors and changes!

Stanje: novo, Böckmann Three-Way Tipper No hidden costs with us! Freight and vehicle documents are included in the sale price! Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 3500 kg Unladen weight: 1045 kg Payload approx. 2455 kg (payload figures may vary depending on equipment and design) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Magnetic cable remote control with flexible coiled cable for electric pump can be attached anywhere on the frame Emergency stop battery disconnect switch ALKO heavy-duty automatic jockey wheel Aluminum sidewalls Removable steel corner posts Removable side boards Folding front panel enables transport of longer materials Rear swinging tailgate Integrated access ramp hatch at the rear Integrated securing rail at the rear for attachment of loading ramps Welded and hot-dip galvanized frame and tipping bridge construction for increased stability, torsional and tip resistance 4 robust, rattle-free lashing rings (pulling force 500 kg) (contrary to images) Integrated holes in the side frame profile for easy retrofitting of additional lashing eyes 14" tires ensure high ground clearance Safety support for securing the tipping bridge during maintenance Sturdy lever locks on the sidewalls Plastic mudguards at the rear including mud flaps Dimensionally stable combo floor – continuous phenolic resin-coated plywood, reinforced with galvanized steel floor for high point loads and impact resistance Front position lights 2 large wheel chocks Bolted V-drawbar Protected storage of battery and all electronics in a splash-proof box Hydraulic hoses safely routed in the longitudinal frame Including vehicle papers Fodpfey I Ndbex Abqsgd Possible additional options and accessories for this trailer: Ramp compartments including aluminum loading ramps Crank supports Charger for tippers with electric pump and adapter Mesh extension (600 mm or 1000 mm) Side wall extension Load securing net Net hooks fully mounted along the sidewalls Additional side wall extension 350 mm Toolbox or storage box mounted on the front panel or under the loading area Flat tarpaulin in various colors Shock absorbers including 100 km/h approval Custom tarpaulin construction Registration of your new trailer at the local vehicle registration office

Stanje: novo, Action!!! Böckmann Three-way Tipper with Mesh Sides and Load Securing Net Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 950 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: 1,045 kg Payload approx. 2,455 kg (Payload figures may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88H) and emergency hand pump Fedpfxoy I I Tbo Abqjgd Magnetic cable remote control with flexible spiral cable for the electric pump, attaches anywhere on the frame Emergency stop battery disconnect switch ALKO heavy-duty automatic jockey wheel Aluminium drop sides Removable steel corner posts Removable drop sides Fold-down front wall allows transport of longer materials Swing tailgate at rear 600 mm mesh extension Green load securing net Integrated ramp compartment at the rear for loading ramps Integrated securing rail for hanging loading ramps at the rear Welded and hot-dip galvanized frame and tipping bridge for increased stability, torsional and tipping resistance 4 sturdy, rattle-free lashing rings (pulling force 500 kg) (contrary to the pictures) Integrated pre-drilled holes in the side rail profile for easy retrofitting of additional lashing eyes 14" tires for high ground clearance Safety support for securing the tipper bridge during maintenance Robust lever locks on the drop sides Plastic mudguards at the rear including mud flaps Dimensionally stable combination floor – continuous phenolic plywood reinforced with galvanized steel flooring for high point loads and impact resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Protected housing for the battery and all electronics in a splash-proof box Hydraulic hoses safely routed inside the longitudinal member Including vehicle documents. No hidden costs with us! Freight and vehicle documents are included in the sales price! Possible additional options and accessories for this trailer: Ramp compartments including aluminium loading ramps Wind-down supports Charger for tipper with electric pump and adapter Side extension boards Perimeter net hooks mounted on the drop sides Additional 350 mm side extension boards Toolbox or storage box mounted on the front wall or underneath the load area Flat tarpaulin in various colours Shock absorbers incl. 100 km/h type approval Custom tarpaulin body Registration of your new trailer at the vehicle registration office

Stanje: novo, Special offer!!! Böckmann three-way tipper with steel side extensions and load securing net Fgedpfoy I D Iujx Abqsd Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 950 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: 1045 kg Payload approx. 2455 kg (payload specifications may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for the electric pump can be attached anywhere on the frame Emergency battery isolation switch ALKO heavy-duty automatic jockey wheel Aluminum side panels Removable steel corner stanchions Removable side panels Drop-down front panel allows for the transport of longer materials Rear swinging tailgate 600 mm mesh extension Green load securing net Integrated ramp access flap at the rear Integrated securing rail for attaching ramps at the rear Welded and hot-dip galvanized chassis and tipping frame provide increased stability, resistance to twisting and tipping 4 stable, rattle-free lashing rings (pulling force 500 kg) (feature deviates from pictures) Integrated holes in the side frame profile for easy retrofitting of additional lashing eyes 14" tires guarantee high ground clearance Safety support to secure the tipper bed during maintenance Robust toggle latches on side panels Plastic fenders at the rear including mud flaps Dimensionally stable combined floor – continuous phenolic resin-coated panel reinforced with galvanized steel sheet for high point loads and impact resistance Front position lights 2 large wheel chocks Bolted V-drawbar Protected housing for battery and all electronics in splash-proof box Hydraulic hoses securely routed in the longitudinal frame Including vehicle registration documents Possible additional options and accessories for this trailer: Ramp storage compartments incl. aluminum ramps Crank supports Battery charger for tipper with electric pump and adapter Side extension boards Net hooks mounted all around on the side panels Additional 350 mm side extension Tool box or storage box mounted on the front wall or under the loading area Flat tarpaulin in different colors Shock absorbers incl. 100 km/h certificate Custom tarpaulin superstructure Registration of your new trailer at the road traffic office

Stanje: novo, največja dovoljena obremenitev: 2.440 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.240 mm, širina tovornega prostora: 1.800 mm, ANHÄNGERWIRTZ – The online pickup market for your new trailer – offers top-brand models! - Over 850 new trailers in stock - Over 130 used trailers always available Non-binding example: Category Three-Way Tippers – only while stocks last! Böckmann Tipper DK AL 3218/35 Profi Electric + NHP 3500kg Three-way tipper DK-AL 3218/35 Profi E, 324x180x35cm, 3500kg, ALKO tandem high-loader V chassis, aluminium drop sides with four-way folding/removable hinged fasteners, steel sheet floor, electro-hydraulic tipping with own battery, emergency hand pump, emergency stop, 2+2 recessed DIN lashing rings rattle-free, heavy-duty automatic jockey wheel… 😊 New 24/7 sales via our online shop Telephone order line: MON. – 08:00 to 12:30 & 14:00 to 18:00 Or 24/7 through our online shop at trailershop Fgsdjy A S I Sopfx Abqod Content and images are subject to copyright – logos are protected trademarks 04/26 Manufacturer: Böckmann Fahrzeugwerke GmbH Item No.: 1141164 Financing available Shipping method: freight item

Stanje: novo, največja dovoljena obremenitev: 2.600 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.240 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 350 mm, Böckmann Three-Way Tipper DK-AL 3218/35 Profi, electrically tiltable NEW – Made in Germany! SPECIAL PROMOTIONAL PRICE – Only while stocks last. The professional solution: The DK 3218/35 E gives you the proven Böckmann quality from the tipper series. The best and most robust model the market has to offer! * Electrically tiltable with emergency hand pump * Torsion-resistant, fully welded and hot-dip galvanized base frame with heavy-duty steel profile bridge * Heavy-duty V-drawbar * Heavy-duty jockey wheel * Maintenance-free rubber spring axle with independent wheel suspension * Robust, double-walled and anodized aluminum drop sides (35 cm), foldable and removable on all 4 sides * Front drop side with rubber rest; large-diameter hydraulic telescopic cylinder with hand and electric pump Fgjdpfx Ajx T Sapjbqod * Reinforced steel sheet floor with sturdy waterproof phenolic plywood panel * 4 heavy-duty lashing rings with springs (no rattling noise) * Rubber strip between tipper body and chassis * 13-pin plug * Includes vehicle registration document and COC papers! Available accessories: * Mesh extension (60 cm) available for an additional €1,189 incl. VAT * 100 km/h upgrade for €250 incl. VAT * Aluminum loading ramps (2,700 kg capacity per pair) in built-in compartments for €699 incl. VAT * Heavy-duty rear support legs (pair) for €250 incl. VAT * Rear drop-side with pendulum function (see pictures) for an additional €195 incl. VAT Attractive financing available upon request Sales, consultation, and collection in Zell by appointment. Please note, due to current material shortages among suppliers, quoted prices for trailers, accessories, and components may be subject to surcharges. Subject to prior sale and errors. Please inquire for availability and final pricing. Constantly large selection of new and used car trailers from Saris, Böckmann, Humbaur, Stema, Pongratz, and WM-Meyer available immediately or at short notice. For self-transport, we can provide you with a transit number plate for €20. Delivery within Germany available for an additional charge!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 800 kg, največja dovoljena obremenitev: 2.700 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, skupna dolžina: 5.000 mm, skupna širina: 1.920 mm, skupna višina: 1.620 mm, vzmetenje: drugo, velikost pnevmatike: 195/50R13C, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, While stocks last! Manufacturer: Debon Gross vehicle weight: 3,500 kg Unladen weight: 830 kg Payload: 2,670 kg Axles: 2 Loading area length: 3,600 mm Loading area width: 1,860 mm Loading area height: 350 mm Standard equipment: - Fully galvanized chassis - Two heavy-duty axles - Reinforced multiplex floor with mounted galvanized steel plate - Four removable aluminium drop sides, 350 mm high, for easy opening - Sides mounted externally for increased loading width - Automatic jockey wheel - Protected front and rear lighting Fsdpfx Aon Shg Rsbqegd - Hydraulic pump with battery - Latching rod - Square posts (prevents dirt accumulation in corners) - Removable galvanized steel H-frame - 8 lashing points - Ramps stored in compartment - Heavy-duty rear supports Optional accessories: - Mesh side extension €950 - Drop side extension €900 This is a new vehicle. VAT can be shown separately.

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading Platform Hydraulically Tippable with Hand Pump and Electric Pump Tip Angle: Rear 42°, Side 50° - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made from a single piece of steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - 350 mm high side walls made of aluminium, completely removable - Rear flap can be used as a swing tailgate Fgedpfewlabxex Abqsd - 6 lashing rings mounted on the bridge floor, each with an 800 kg tie-down capacity, DEKRA-certified - Jockey wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Silver side panels - Parabolic suspension Price includes vehicle registration certificate (Part II and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Subject to technical changes, price adjustments, and errors. No liability for mistakes or printing errors. Features: Automatic reversing system, rubber suspension axle, independent wheel suspension, tilting loading area, jockey wheel, marker lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single piece of steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminium side walls, completely removable, rear flap can be used as a swing tailgate, 6 lashing rings on the bridge floor (800 kg capacity per ring, DEKRA-certified), plank compartment prepared for easy retrofit of aluminium ramps, silver side panels, parabolic suspension.

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tip angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipper bed, hot-dip galvanized - Tipper bed made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear tailgate with pendulum function - 6 lashing rings mounted on the bed floor, each with a lashing force of 800 kg, Dekra-certified - Support wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Black side panels - Parabolic suspension Price includes registration certificate (part II) and COC documentation Fgedpovtf Nfsfx Abqsd We have a large range of trailers by the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate for carriage. We service and repair trailers of all manufacturers. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Reversing automatic, rubber suspension axle, independent suspension, tiltable platform, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper bed made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium removable side panels, pendulum-type rear tailgate, 6 lashing rings (800 kg each, Dekra-certified), preparation for aluminium ramps, black side panels, parabolic suspension.