X Priklopnik Z Menjalnim Šasijem nakup rabljenega (48.029)

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-over Platform Trailer Ref. for enquiries: 11630 Vehicle available immediately from stock in Alsdorf New vehicle inc. COC * Gross weight: 21 t, Payload: 16.5 t, hot-dip galvanized chassis * Platform version with 400 mm high front wall, ramp securing via ramp holding rods and diagonal bracing * Version with gross weight 21 t, reinforced frame and axles, axle spacing 1,810 mm * Floor height approx. 910 mm loaded / approx. 940 mm unloaded * 7 m loading area with 400 mm high front wall * Extended ramps: 3 m one-piece hot-dip galvanized ramps with galvanized grating * Ramp lift with vertically standing, adjustable springs for easy single-person operation * Load securing package: * 4 UVV folding lashing brackets (LC 8,000 daN) mounted in the existing hole pattern in the 45° outer frame, positioned approx. 1 m from front/rear crossmember * 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole pattern in the outer frame * 2 UVV lashing rings each at front and rear, recessed in crossmember, LC 10,000 daN * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and end crossmember * Preparation for retrofitting container locks (container locks available at extra cost) * Softwood floor, 50 mm thick * Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering * 235/75R 17.5 (twin tyres, 8x) with tyre pressure monitoring sensor * Plastic toolbox in front of the front wall, right-hand side in direction of travel * LED lighting system * 7-pin socket at rear, prepared for overlength lighting with tail light (58 R) and ground Dcedpfeyvxg Uex Al Heg * 2 LED reversing lights at rear * Flashing side marker lights * Oversize warning panel * 1 removable all-round LED beacon incl. bracket and installation * Folding supports at rear, front support leg with geared winding mechanism ---- Lease purchase example from our partner MMV Leasing: €665/month net for 60 months term with no down payment and €0 final instalment Other terms with/without down payment/final value possible! We are Müller-Mitteltal authorised dealer ----* Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside business hours available by appointment * We speak German, English, Russian, Polish, French * WhatsApp

Stanje: rabljeno, lastna masa: 3.480 kg, največja dovoljena obremenitev: 20 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2013, vzmetenje: jeklo, velikost pnevmatike: 205/ 14, stanje pnevmatik: 80 odstotek, barva: bela, Leto izdelave: 2013, velikost sprednje pnevmatike: 205/ 14, velikost zadnje pnevmatike: 205/ 14, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, žerjav, Reference number for inquiries: 41180 Klaas, K21-31TSP-A * Year of manufacture: 2013 * Crane * Outrigger supports * Suspension: leaf spring * Gross vehicle weight: 3,500 kg * Unladen weight: 3,480 kg * Payload: 20 kg * Permissible total weight: 3,500 kg * Tyre condition 1st axle: 80% -- 80% - Tyre size: 205/R14 * Tyre condition 2nd axle: 70% -- 70% - Tyre size: 205/R14 * Tyre sizes: 205/R14 * KLAAS K21-31TSP-A aluminium crane * 1 previous owner * Maximum lifting capacity: 1,500 kg * Radio remote control * 2 manual extensions * 30-metre aluminium crane * Operating hours: 3,037 * Load diagram: see photo Disclaimer: Subject to change, prior sale, and error. Dcodpfx Asy Ilfnol Heg More photos and videos available on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documentation * Order of export / customs licence plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer of commercial vehicles Please contact our trained staff—we are happy to advise you.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W09K35135G1KB6013, Leto izdelave: 2016, obratovalne ure: 1.823 h, TÜV veljaven do 08/2026, po želji tudi nov. Vključena ustrezna oprema: klešče, posoda za ruševine, kletka za obešanje. Dcsdpfxsyt Hhms Al Hog

Stanje: rabljeno, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2020, Oprema: ABS, SCHWARZMÜLLER 3-axle Flatbed Semi-Trailer RH 80 / CONTAINER / STAKE POCKETS / SAF / LIFT AXLE Manufacturer: SCHWARZMÜLLER First registration: 10.2020 Dimensions: 13,600 x 2,480 mm Gross weight: 34,000 kg Unladen weight: 6,580 kg Kingpin load: 12,000 kg Mileage: 162,000 km Axle manufacturer: SAF disc brakes Lift axle Anti-slip plywood floor Toolbox Exterior paintwork: red Superstructure paintwork: white Chassis paintwork: red Tyres: 6 units Tyre tread depth: 9/10/6/6/7/11 mm Rear axle tyres: 385/55 R22.5 Robust flatbed semi-trailer with stake pockets and 6 pairs of container locks Container positions: 1 x 40 ft / 2 x 20 ft / 1 x 20 ft central and 1 x 30 ft Multilock outer frame SAF disc brakes 430 mm / LIFT AXLE Dcsdpfexubiyox Al Hjg Front wall 2,400 mm high Fifth wheel height: 1,130 – 1,220 mm Stake pocket battery distributed at 9 locations on the loading platform Stake size: 80 x 80 mm 23 pairs of lashing rings on the loading platform Only 162,000 km mileage 4 x toolboxes Width marker boards Outer frame repainted All information given without guarantee, subject to prior sale! If you have any questions regarding this or other vehicles, please call us.

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronski sistem kočenja) * RDÜ (nadzor pritiska u gumama) * Bubanj kočnice, 2 x 5,5 t Gigant osovine * Parabolične opruge sa izjednačivačem opterećenja * Vučno vratilo podesivo po visini oko 300 mm * BPW podupirač * Mehaničke zadnje noge za podršku Dcsdpfx Alowyhzpe Heg * Plastična kutija za alat napred desno na čeonoj stranici * Bočna zaštita od podletanja * LED rasveta * Pod od 50 mm mekog, četinjastog drveta * U uglovima ispred čeone stranice i završnog nosača po 1 x 6,3 t hvatište za vezivanje, kao i po 2 UVV prstena za vezivanje po 6,3 t ugrađena sa strane u spoljašnji ram * Jednodelne mehaničke rampe od rešetki sa oprugom za rad jednom osobom, dimenzije oko 2.350 x 870 mm (unutrašnje rastojanje 20 mm, rampe nisu pomične) * Čeona stranica, bočne stranice, blatobrani i vučno vratilo toplo pocinkovani * Osovine, opruge, vazdušni rezervoar, prednji podupirač obojeni u crno * Novo vozilo sa punom garancijom proizvođača * Greške i međuprodaja zadržani * Dostupno od oko 35. nedelje 2026.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2016, Oprema: ABS, Besuchen Sie unsere Webseite, wo Sie unseren kompletten Fahrzeugbestand mit vielen weiteren Fotos und Informationen in mehreren Sprachen finden. SEL 8487 Schmitz Cargobull SCS 24/L - 13.62 E B Liftachse deutsche Zulassung EZ: 31.08.2016 Dcsdpfx Asyv T Exel Heg Technisch zulässiges Gesamtgewicht (kg): 36.000 Zulässiges Gesamtgewicht (kg): 36.000 Leergewicht (kg): 6.450 FIN: WSM000003252480 Hauptuntersuchung (HU): 10.2026 BEREIFUNG UND ACHSEN: Bereifung: 385/65 R 22,5 Achsenkonfiguration: 3 Achsen Schmitz Cargobull 1. Liftachse Luftfederung Scheibenbremse AUFBAU Innenmaße: Breite (m): 2,46 Länge (m): 13,50 FAHRZEUGUNTERLAGEN: Zulassungsbescheinigung Teil I Zulassungsbescheinigung Teil II Zusätzliche Dokumente auf Anfrage gegen Aufpreis. M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA (Ukrainisch, Russisch) Wir sprechen: DEUTSCH, ENGLISCH, ITALIENISCH, SPANISCH, PORTUGIESISCH, UKRAINISCH, RUSSISCH, POLNISCH, BOSNISCH Obwohl alle Anstrengungen unternommen wurden, um die Richtigkeit der Angaben zu gewährleisten, übernehmen wir keine Haftung für Fehler oder Auslassungen. Bitte konsultieren Sie die bereitgestellten Fotos. Die angegebenen Maße sind Circa-Werte. Unsere Fahrzeuge werden im aktuellen Zustand verkauft. Wir laden unsere Kunden ein, unser Unternehmen zu besuchen und den Zustand des Fahrzeugs persönlich zu überprüfen. Zudem besteht die Möglichkeit einer Probefahrt. Bitte beachten Sie, dass die gelieferten Batterien die aktuell eingebauten sind. Falls Sie neue Batterien wünschen, informieren wir Sie gerne über die Zusatzkosten.

Stanje: rabljeno, konfiguracija osi: 1 os, Znamka: Drugo Kurt Ries B15H2EM Prikolica za zavarovanje prometa Prikolica za osebna vozila LED osvetlitev Lastna teža: 420 kg Skupna masa: 750 kg Puščica desno F8 Puščica levo F7 Križ sredina F7+F8 Interna številka: 26X020 = Dodatne informacije = Lastna teža: 420 kg Dodey D Ur Nspfx Al Hecg Nosilnost: 330 kg Dovoljena skupna masa: 750 kg

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container version ---Technical Data * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles * Tyres: 235/75 R17.5, twin tyres * Air suspension: yes * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ---Chassis / Superstructure * Platform trailer with twistlocks for container transport * Multiple container locks (fixed + extendable) * 6 pairs of lashing rings on the outer frame * Additional lashing points under the cross members * Reinforced outer frame with lashing holes Dedpfx Asy Euffsl Hecg * 27 mm birch plywood anti-slip floor * Galvanised omega profiles * Cross member spacing max. 400 mm ---Brake / Safety * EBS brake system (Knorr or Wabco) * ABS / Roll Stability Program * Dual-circuit air brake system * Basic tyre pressure monitoring * 2 air tanks (each approx. 80 L) ---Features * Complete LED lighting system * Side LED marker lights (flashing) * 15-pin electrical system * Rear underrun protection * Side impact protection * Plastic mudguards (180°) * Mud flaps with "WIESE" logo * Rear folding and extendable access ladder * Rear impact buffers ---Towing Equipment * 18t drawbar (fixed and extendable) * 40 mm drawbar eye * Turntable with slewing ring * Height adjustment available ---Miscellaneous * TÜV certificate available * Galvanised chassis * High-quality steel construction * Made in Germany For further information, please feel free to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 14.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2017, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 10.350 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Skupna dolžina: 12.000 mm Nakladalna dolžina: pribl. 10.350 mm Dcsdpfjy Hzvmex Al Hog Širina: 2.550 mm / Nakladalna širina pribl. 2.400 mm Nakladalna višina: pribl. 850 mm Dodatne informacije - 3. os prisilno vodena - Notranja nakladalna višina pribl. 3.150 mm - Dvojna pnevmatika 215/75R17,5 - BPW osi - Zračno vzmetenje - Drsna ponjava Vozilo je lahko polepljeno z oglaševanjem, označeno in/ali z ostanki oznak.

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Platform: * EBS (Electronic Braking System) * Emergency release system for spring-loaded brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles Dedpfx Aler Dpzxs Hecg * Air suspension with lift and lowering device including RTR function * First axle liftable * Last axle is self-steering trailing axle with electro-pneumatic steering lock via reverse gear PIN (Steering lock for trailing axle activated from the tractor for maneuvering purposes—no truck-side installation required—wired to PIN 10 in the 15-pin connector, only for maneuvering and not for use on public roads) * SmartBoard control unit as infotool with pressure sensors for displaying total axle load * Tire pressure monitoring with readout in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange drawbar eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at the front, mechanical swivel supports at the rear chassis * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the drive-on slope * Folding rear stanchions * Steel rear wall slotted in before rear stanchions * Mechanically adjustable warning panel kit front and rear * Toolboxes made of galvanized steel sheet—black powder-coated—approx. 650 x 300 x 600 mm, right side * 15-pin power connector * LED tail lights * Removable LED rotating beacon incl. bracket and installation * 2 x LED reversing lights at vehicle rear (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm steel front wall slotted in * Perforated outer frame approx. 45° angled with provisions for mounting 3 t folding lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes for 1.2 t lashing points in front and rear crossmembers * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-circuit hydraulic control block for potential retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear supports, and loading ramps hot-dip galvanized * Axles, air tanks, flange drawbar eye, and front landing gear painted in black * Hydraulic flow divider in the trailer (for hydraulic pump output in truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Subject to error and prior sale * Available immediately ex Egestorf

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, dolžina tovornega prostora: 13.720 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Oprema: ABS, Vehicle identification no.: YAFSR3001J0021353 Extendable by 8,200 mm with sliding table Container pockets WADER for 1 x 20", 2 x 20", 1 x 40", extendable to 45" container German MOT (HU) valid until 02/2027 – Safety inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically-mechanically steered axles on turntable with cable control and radio remote control Automatic self-tracking Platform dimensions: 13,720 mm – loading height: 1,100 mm Fifth wheel height: 950 – 1,050 mm Rear steering angle: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket Electro-hydraulic power unit Width marker lighting Toolbox Central lubrication system Dcjdpoyw Dl Ejfx Al Hog Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Modifications, prior sale, and errors excepted. This description serves for general vehicle identification and does not constitute a warranty in the legal sense of sale of goods law. The specification in the purchase contract is decisive. Our offer is generally without new TÜV (MOT) approval. If a new TÜV approval is required, we can provide an offer through our partner workshops! The vehicle may be equipped with stickers and/or advertising. Our general terms and conditions of delivery and payment apply.

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) Dcodpoykx Nkefx Al Heg ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: rabljeno, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 12/2019, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Oprema: ABS, Vehicle Identification No.: YAMT23XX1K0104335 TELESCOPIC extendable by 7,300 mm CONTAINER POCKETS WADER for 1 x 20", 2 x 20", 1 x 40", 45" container when extended German Inspection (HU) valid until 02/2027 - Safety Inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically/mechanically steered axles with cable control + remote radio control Platform dimensions: 13,500 mm (including 500 mm tapered) - Loading height: 1,100 mm Fifth wheel height: 950 - 1,050 mm Rear steering radius: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket - electro-hydraulic unit Width marker lights Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel carrier WITH spare wheel Changes, prior sale, and errors excepted. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sales law. The purchase contract description is binding. Dcedpeywqduefx Al Hjg Our offer is generally without new roadworthiness inspection (TÜV). Should a new inspection be desired, we will be happy to provide you with an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply.

Stanje: rabljeno, prva registracija: 03/2002, naslednji pregled (TÜV): 03/2027, Oprema: ABS, Samo za izvoz Prodaja samo v tujino Dcodpfey Dmq Djx Al Hog SPR 324 Kotschenreuther 3 osi

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profile 30.0: * EBS-E (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lift/lower system * SmartBoard as trailer infotool with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panels front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Folding (hot-dip galvanized) lid for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) mounted right side * 15-pin electrical connector * LED lighting 12/24 V * LED beacon (removable) at rear * Side marker lights with indicator function * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * Tire pressure monitoring system with display option in truck via EBS signal (no truck-side installation required) * Rubber lining on folding ramps as well as on the access slope, left and right (approx. 860 mm long) * Rubber lining on the longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-bed platform * Each side with 4 stake pockets, with simultaneous 2-ton lashing capacity * Load securing package consists of: 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame—in the corners 13.4 tons, elsewhere 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not possible in rear slope) * Board holder under the loading area, lengthwise * Roller stop raised in front of front crossmember with 1 x 6.4-ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump flow in truck over 40 to max. 140 l/min) * Hydraulic control block splash-proof * Two-line hydraulics * Platform over kingpin: approx. 1,960 x 2,520 mm * Rear platform: approx. 6,500 x 2,520 mm (including 860 mm access slope) * Loaded deck height approx. 890 mm +/- 20 mm (air suspension) Djdpeq Dyvcjfx Al Hscg * Chassis, bogie, roller stop, folding width extensions & loading ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted black * Loaded height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20 of 2026

Stanje: rabljeno, največja dovoljena obremenitev: 37.420 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, dolžina tovornega prostora: 16.900 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, skupna višina: 3.000 mm, Leto izdelave: 2015, Oprema: ABS, HRD SPTM4A Mega Telescopic Semi-Trailer Serial Number: W09SPTM4NFEN10031 First Registration: 24-03-2015 SAF Axles Lifting Axle 2 Steering Rear Axles Drum Brakes with ABS and EBS Air Suspension Dcsdpfjxzmg Rex Al Hsg Tyres: 235/75 R17.5, 40% tread remaining Gross Weight: 48,000 kg, Unladen Weight: 10,420 kg, Payload: 37,420 kg Total Loading Length: 1,290 cm + 400 cm extendable Loading Floor Height: 95 cm Aluminium Loading Ramps Total Trailer Length: 13.30 m, Width: 2.54 m, Height: 3.00 m Container Lockings for 2x20-foot, 1x40-foot, 1x20-foot in the center Lashing Eyes Stake Pockets Errors, omissions and prior sale excepted.

Stanje: rabljeno, največja dovoljena obremenitev: 30.170 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2012, dolžina tovornega prostora: 13.640 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, Oprema: ABS, Ploskovna nadgradnja, talna podloga iz vezane plošče Siebdruck, neprekinjene odprtine za pritrditev v zunanjem okviru, 4 žepki za vstavitev stebrov na vsaki strani, JOST podporne noge, izvlečne opozorilne table, ABS, EBS, BPW EcoPlus os/i, kolutne zavore, zračno vzmetenje z dvigom in spustom, 1. in 3. os – dvižna os, 2x zaboji za orodje, priprava za rotacijsko luč zadaj, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Dcedpfx Ajyytfyel Heg SI86626 Naša ponudba je načeloma brez nove tehnične kontrole (TÜV). Če želite novo TÜV kontrolo, vam lahko pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Uporabljajo se naši splošni pogoji dobave in plačila. Za ta objekt vam z veseljem pripravimo ponudbo financiranja ali leasinga. Kontaktirajte nas!

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 210 NEW | Hydraulic steering – extendable | 36t payload | 3 axles | from €76,900 New vehicle – can be individually configured for your application. Dedpoypaz Sjfx Al Hecg High payload with robust construction and maximum cost-effectiveness. Highlights: - Extendable loading platform with pneumatic locking - Numerous heavy-duty lashing points for maximum load securing - Hydro-mechanically forced-steered BPW axles with disc brakes - Air suspension with lift and lower function - WABCO EBS brake system in compliance with EU regulations - Mechanical JOST landing legs with 2-speed gearbox - LED lighting system - Tyre pressure monitoring system (TPMS) Construction & Durability: - High-strength fine-grain steel construction - Metallised chassis with premium corrosion protection - Multilayer paintwork with additional cavity sealing - Heavy-duty wooden floor in robust Omega profiles Included Options: - Convenient rear steering via cable remote control - Electro-hydraulic power pack - Galvanised front wall (approx. 1,200 mm) - EN 12642-XL body - 10 pairs of stake pockets for flexible load securing - Spare wheel holder under the loading area - Beacon holder - Reflective tape & European reflector plates - Air couplings at front Additional equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, New vehicle / Stock vehicle / Incoming unit? Also available as MEGA version / from €24,200.-- For sale is a Wielton Platform Master semi-trailer, designed for heavy-duty and flexible use in the transport of building materials, steel, and long goods. The vehicle is available in standard body height and optionally as a MEGA version. Note: The following equipment specification refers to a current stock or pre-ordered vehicle. Variations depending on the specific vehicle, production status, or individual customer configuration are possible. ----Chassis / Frame Frame as double longitudinal beam with welded cross members and outer frame * Welded construction made from high-strength S700 steel * Perforated outer frame with continuous lashing options * SAFETY LOCK system: approx. 60 lashing points per side * Designed for a fifth wheel height of 1,120 mm (MEGA version with reduced fifth wheel height optionally available) * 19 pairs of lashing rings, each 2.0 t, in the outer frame * 26 stanchion pockets, 81 × 81 mm, as per drawing * Work area according to ISO 1726:2003, weight-optimized construction ----Axles and Running Gear 3 axles, each with 9,000 kg load capacity * SAF axles with air suspension and disc brakes (ET120) * Brake discs Ø 430 mm * 1st axle as lift axle * 2" kingpin, fitting dimension 2,040 mm * 2 mechanical landing gears, SAF brand * Single-sided landing gear operation, right ----Chassis Accessories 2 plastic wheel chocks with holder * Extendable rear access ladder with large tread surface, compliant with accident prevention regulations (UVV) * Large rubber bump stops, laterally steel-reinforced, at rear frame * Side underrun protection to ECE R73 made of lightweight composite material * Rear underrun protection made of steel to ECE R58 * Full PVC mudguards * 2 PVC toolboxes, each 165 l * 12 plug-in stanchions, 80 × 80 mm, length 1.500 mm * 12 stanchion holders * Omission of spare wheel holder * Extendable widening panels ----Brake System / Pneumatics Brake system according to ECE regulations * Two-line compressed air brake system, WABCO brand, ADR-compliant * EBS system WABCO 2S/2M with RSS * Raise/lower facility * Brake line connectors at front of bulkhead * Standard air couplings according to ISO * Aluminum air tanks Djdoypa Aiepfx Al Hecg ----Lighting and Electrics Lighting support from composite material * Lighting system 24 V according to ECE R48, Aspöck EP III brand * 2 seven-chamber multifunction rear lights * LED license plate lighting * 2 LED outline marker lights * LED side marker lights * 2 × 7-pin + 1 × 15-pin at front including EBS socket (without connection lines) * Electrical installation and pre-wiring for revolving beacon * 2 additional LED reversing lights ----Wheels and Tires Tyres 6 × 385/65 R 22.5 * 6 × steel rims 11.75 × 22.5, ET120 * Premium tires BRIDGESTONE ECOPIA H002 M+S * Protective caps for wheel nuts ----Flooring 30 mm screen-printed plywood floor, multi-glued, slip- and waterproof; premium brand Koskisen * Sealed cut edges * Perimeter flooring joint * Forklift loadable up to 7,500 kg axle load ----Superstructure Front wall 1,800 mm high * Front wall and front corner stanchions made of natural aluminium ----Paintwork / Color details All steel elements double shot-blasted * KTL primer for optimal corrosion protection * Dust-free robotic topcoat * Frame: RAL 7021 black grey / anthracite * Landing gear: Black, powder-coated * Axles: Black * Rims: Silver * Wheel hubs: Black * Side underrun protection: White * Rear

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, WEB Trailer PRSH 27 NEW | Platform Semi-Trailer | Hardwood Floor | Container-Compatible | from €30,500!!! New vehicle – customizable to your application requirements. Robust platform semi-trailer with hardwood floor for versatile transport tasks. Suitable for container transport (20 ft / 40 ft) as well as general cargo and machinery transport. Highlights • Platform semi-trailer with 27 mm hardwood floor • Container-compatible: 1×40 ft / 1×20 ft center / 2×20 ft • Single tires R22.5 • High lashing forces – certified lashing points • Lift axle with starting aid • Durable WEB Trailer quality for daily use Technical Data • Chassis length: approx. 13,510 mm • Chassis width: approx. 2,540 mm • Unladen ride height: approx. 1,250 mm (with 1,120 mm fifth wheel height) • Max. kingpin load: approx. 16,000 kg • Axles: 3 × 9,000 kg, disc brakes • Axle spacing: 1,310 / 1,310 mm • Tires: 385/65 R22.5 Standard Equipment • Crossmembers IPE 80, spacing approx. 400 mm • Outer frame U-profile 160×120×5 mm • Lashing bars top & bottom every 1,200 mm, certified (5 t) • 8 pairs of stanchion pockets 80×50 mm • 6 pairs of container twist locks (ward plates) • Bulkhead 1,200 mm, sheet metal cladding • Holders for plug-in stanchions on the bulkhead • 24 t telescopic landing gears • EBS brake system • 1st axle as lift axle, automatic with starting aid • 24 V LED lighting system, 15-pin • Underrun protection rectangular tube • Rear access ladder with platform Floor & Cargo Securing • 27 mm hardwood floor in Omega profiles • Weatherproof floor for open platforms • Certified forklift axle load 9.0 t according to DIN EN 283 • Extensive lashing options for flexible cargo Included Options • Extendable red/white warning plates (rear & landing gears) • Large bent lamp bracket • Open tool box made of perforated sheet • License plate lighting & lane marker lights • Bulkhead color RAL 9006 silver • Chassis MB 7350 Nova Grey • KTL coating with zinc phosphating + powder Dsdpfeypa Ilex Al Hscg Further equipment and individual customization available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, New vehicle / stock vehicle / inbound? Also individually configurable / from €29,900 -- For sale is a Wielton construction materials semi-trailer, designed for professional use in building materials and general cargo transport. Note: The equipment listed below describes a current stock or pre-ordered vehicle. Deviations depending on the specific vehicle, production status, or individual customer configuration are possible. ----Chassis Load floor made of 30 mm phenolic plywood, load capacity 7.5 t * Steel lamp bracket, 371 mm * 19 pairs of lashing rings, each 2.0 t * Rubber-steel rear impact buffers * Folding rear underrun protection * Rear underrun protection made of steel * Lateral underrun protection made of aluminum ----Axles and Suspension 3 axles, rigid version * SAF disc brake axles, 3 × 9,000 kg, 22.5" INTRADISC * 1st axle lifting axle * No lift axle on the 3rd axle * Fifth wheel height approx. 1,120 mm ----Landing Gear SAF Hercules 2-speed landing gear, full-load ----Mudguards PVC mudguards, half shell, 2 front / 2 rear ----Rims 6 × steel rims 22.5 × 11.75, ET-120 * Wheel nut protection caps * Without spare wheel rim ----Tyres 6 × 385/65 R 22.5 according to manufacturer selection Options: * GOODYEAR KMAX G2 T M+S 3PMSF Roll resistance: B | Wet grip: C | Noise: 71 dB * BRIDGESTONE Ecopia H-TRAILER 002 M+S 3PMSF Roll resistance: A | Wet grip: B | Noise: 68 dB * Without spare tyre ----Other Chassis Equipment 2 × toolboxes, each 165 l * Spare wheel basket * Extendable width marker boards ----Superstructure Front wall H = 1,800 mm, galvanised splash plate up to top edge * Drop sides 1,000 mm * Bolt-on drop sides * Folding drop side at rear ----Braking System / Pneumatics WABCO braking system with basic modulator * RSS / RSP * Aluminium air tanks * RTR automatic self-levelling * Brake system WABCO or Knorr with H-S-valve ----Electrical System Full LED lighting Aspöck ECOLED II * Flashing side marker lights * 2 LED reversing lights * 2 × 7-pole + 1 × 15-pole, incl. EBS connection * Without connection cables to tractor unit ----Paintwork / Surfaces Frame hot-dip galvanized, unpainted * Side walls anodised, unpainted ----Additional Systems ABERG TPMS tyre pressure and temperature monitoring * Sensors on rims * Control unit connected to EBS * Developed for semi-trailers and trailers ----Marking Dcjdoypa A Aopfx Al Heg Partial contour marking with Wielton logo * White on the sides, red at the rear * Wielton warning stickers * Vehicle labeling in German ----Further equipment and individual customizations available at any time – we will configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 37.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 200 NEW | extendable | 37t payload | 3 axles | from €57,000 New vehicle – customizable to your specific application. High payload with sturdy construction and maximum cost-effectiveness. ----Highlights: Dcjdoypazxepfx Al Hjg • Extendable loading platform with pneumatic locking • Numerous heavy-duty lashing points for maximum load securing • BPW axles, air-suspended with disc brakes and lift/lower function • Self-tracking axles with electro-magnetic reverse lock • WABCO EBS brake system compliant with EU regulations • Robust steel construction with premium corrosion protection • LED lighting system • Mechanical JOST landing gear with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Construction & Design • High-strength fine-grained steel construction for long service life • Metallized chassis with additional cavity sealing • Multi-layer paint finish for optimum protection • Durable wooden floor mounted in sturdy omega profiles ----Included Options • Galvanized front wall (approx. 1,200 mm) • Spare wheel holder under the loading platform • 10 pairs of stake pockets for flexible load securing • EN 12642-XL body • Reflective tape & European reflector plates • Brackets for warning signs incl. socket • Beacon brackets • Air couplings at the front ----Further equipment and individual customizations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 15.825 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including units available for immediate or short-term delivery, on our website. Excerpt from equipment specification. Full equipment details available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly under the load floor, two insertion slots for one ramp each, with locking plate in the rear header frame Underride guard: * According to EC regulations Front landing gear: * Single-sided operated landing legs Rear support: * Two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, manufacturer SAF, drum brakes approx. 300 x 200 mm, hub-centered wheel fixing for twin tyres, ABS, total air suspension travel approx. 200 mm (raise approx. 140 mm, lower approx. 60 mm), operated by hand lever with ratchet function Tyres: * 8 units, 235/75R 17.5 – make as per our choice, on steel rims 6.75 x 17.5, fitted with offset Splash protection: * PVC spray guards in front of and behind axles, EC compliant Load securing: * On the outer frame approx. every 150 mm a hole for lashing straps, tensile strength approx. 2.5 t (lashings can be hooked in with side walls closed, bevelled outer frame) * 6 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 8 t * Stake pockets for removable stanchions 80/50: 3 pairs of stake pockets on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame Front wall: * Made from 25 mm removable front board Lighting system: * Lighting in accordance with EC regulations, 24 volt, multi-chamber tail lights, number plate lights, side marker lights and lane control lights at the rear, connection plate on the left of the drawbar including connection cable with 15-pin and two 7-pin plugs Accessories: * 2 wheel chocks with holders * Removable warning beacon at the rear * Additional 40 mm coupling device supplied (max. GVW 13,500 kg) * Rear extension approx. 800 mm including underride guard, extendable loading platform with load capacity approx. 2 t, locking positions every approx. 200 mm * Mechanically adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolt-on towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets evenly distributed across the loading platform * 12 removable stanchions made of galvanized pipe, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for one 20’ container, container locks extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair aluminum ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of 25 mm side walls and a rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), includes side wall holder at front wall Paintwork: Dcodpfx Aoy Auhbsl Hjg * Chassis shot-blasted, cleaned, and hot-dip galvanized to latest standards * Structure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized & RAL 3002 carmine red * Side walls: RAL 3002 carmine

Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads. Coupling Device: * Fifth wheel plate with 2-inch kingpin. Underrun Protection: Dcjdpfx Alsy Auhzj Heg * In accordance with EC regulations, bolted design. Side Protection: * In accordance with EC regulations. Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction). Axles: * 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm). * Air suspension control via manual regulator with stop function. Steering: * Last axle steered automatically by rod linkage. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Brake System: * Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck. * Manufacturer: Wabco. Tyres: * 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer). Mudguards: * In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly. Load Securing: * 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each). * 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each). * On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame). Stanchion Pockets: * 10 pairs of stanchion sockets on the outer frame, evenly distributed. * 4 rows of stanchion sockets across the loading area. * Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm. * Rack inside front wall for 20 plug-in stanchions. Front Wall: * Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor fitted into the outer frame. Sideboards: * 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under the chassis. * Insertion rails for sideboards and stanchions on left and right. Lighting System: * In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights. * 1 x 15-pin and 2 x 7-pin socket connectors on front cross member. Equipment: * Wheel chocks with double holder. * Warning signs according to ECE 70. * Work spotlight on lamp bracket (actuated via reverse gear). * Bracket for beacon at rear, including beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paintwork: * Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour. * Chassis: hot-dip galvanized + RAL colour of your choice. * Front wall: RAL colour of your choice. * Sideboards: anod

Stanje: novo, največja dovoljena obremenitev: 38.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment list. Full specification available upon request. EQUIPMENT: * Gooseneck, approx. 4,100 mm long, with central beam * Extendable loading platform, approx. 9,400 mm long, with rear bevel approx. 350 mm x 10° and integrated hook-in strip for attaching loose aluminium access ramps * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the current platform length * Technical fifth-wheel load: 18,000 kg * Suitable for 4x2 and 6x2 tractor units * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Dsdpfoy Augdjx Al Hocg * 235/75 R 17.5 3PMSF twin tires. Brand subject to availability * ASPÖCK-UNIBOX * 3 kW electro-hydraulic pump unit for controlling hydraulic functions. Without installation of supply ports on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - the first three pairs lying flat (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 2 inch kingpin * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load approx. 50,000 kg * Approx. 32 mm timber floor on gooseneck and platform, encased in aluminium omega profiles * 10 pairs of recessed lashing rings, foldable outward, in the outer frame of the platform * In front of the last axle and on the rear cross member of the semi-trailer, 1 pair of lashing rings each (LC 10,000 daN) * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the platform, for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the loading platform, on the right in the direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform, left side in direction of travel * Bevel at the rear cross member of the vehicle, approx. 350 mm x 10° * Integrated hook-in strip for loose aluminium access ramps at the rear cross member of the vehicle * 1 pair of drop-in supports at the rear cross member * Remote steered axles from the front and rear using cable remote control, with single-track axle alignment, no installation required in the tractor unit * Round NATO socket at the front connector socket panel (Maeler & Kaege VG 96 917) * 1 LED work light on each side, left and right, mounted on the front wall with wiring to the connector socket for the tractor unit * On the extension an additional locking point every 500 mm * Holder for plug-in stakes, for storage when not in use, inside the front wall of the gooseneck * 4 wheel chocks with holder under the loading platform * Galvanized, sliding width extensions, extendable by approx. 230 mm per side (without timber planks) * 1 LED work light each side, left and right, in front of the axles with wiring to the connector socket for the tractor unit * 2 axle load gauges mounted on the left-hand side including axle load diagram * 1st axle with traction aid * Mounts for warning signs under the gooseneck and at left and right on the rear cross member * A