Rosemeier Ve 1 Damen, 1 Herren+U Max Silver Toilettenanhänger nakup rabljenega (60.358)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,4 kW (25,02 KM), obratovalna teža: 2.550 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, Leto izdelave: 2025, številka stroja/vozila: 3559225, Oprema: UVV varnostni pregled, dodatne luči, gumene gosenice, kabina, nastavljivo podvozje, 25 Z-1 Mini Excavator Kohler Diesel Engine KSDI 403 NA, water-cooled Transport weight: 2,458 kg Gross engine power: 18.4 kW / 25 HP Arm length: 1,100 mm Digging depth: 2,624 mm Reach at ground level: 4,356 mm Machine width: 1,550 mm Operating weight: 2,550 kg Max. digging depth – dozer blade down: 2.82 m Max. dump height: 3.16 m Arm length: 1.3 m Nljdpfxovtbf Aj Ab Hsc Arm tear-out force: 14.5 kN Bucket breakout force: 22.3 kN Height above cab: 2.47 m Width over tracks: 1.5 m Equipment: - ROPS/TOPS cab with heater and hardened glass - 300 mm wide rubber tracks, short pitch - AUX 1 high flow & AUX 2 low flow - Suspension seat with fabric upholstery - 1,100 mm arm for AUX 1 & AUX 2 - ISO servo controls with electro-hydraulic dozer blade lever - Electro-proportional control of swing boom and auxiliary circuits - Hammer switch on joystick - Protected LED boom work light - Dozer blade - German specification - Grease gun and cartridge - Battery master switch - German user manual Surcharges: 1,300 mm arm: 400,- 120 kg rear counterweight: 600,- Hydraulic quick-coupler up to arm: 1,000,- Additional options for extra charge: Bucket package: 1 x MS03 quick coupler 2 x trench buckets SB of your choice 1 x grading bucket with 1 cylinder - incl. 2x hydraulic hoses with couplings for 3,466,- Offer price without attachments, plus €500 transport to Eltmann All prices plus VAT, ex Eltmann. Subject to change, errors, and prior sale.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 5 km, moč: 18,4 kW (25,02 KM), vrsta goriva: dizel, barva: rumena, obratovalna teža: 3.556 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, Leto izdelave: 2025, obratovalne ure: 5 h, številka stroja/vozila: 3496101, Oprema: UVV varnostni pregled, dodatne luči, gumene gosenice, hidravlično kladivo, kabina, JCB Short Tail Excavator 35 Z-1 Zero Tail Standard Equipment: - 18.4 kW Perkins engine for global use - Axial piston pump with maximum flow rate of 76 l/min - LED lights with leaving home function - Double-acting AUX circuit with high flow - 12 lashing points on the undercarriage Nlodpfx Ajwmqq Hsb Hoc - Dozer blade and upper structure - Automatic idle function - Bluetooth radio (cab version only) - Bolt-on grab handles - 40 mm dipper stick pin - Steel body/flat glass Optional Equipment: - ROPS/TOPS certified comfort cabin with heating and toughened glass - USB port - Opening front window - Opening right-hand side window - 2 front LED work lights - 1 rear LED work light - 300 mm wide rubber tracks – short pitch, servo-hydraulic - ISO proportional control: hammer/shears and swing bucket hydraulics (electro-proportional) - Suspension seat with fabric cover - German version including operator’s manual - Dipper stick 1,300 mm - Dozer blade Surcharges: Air conditioning: €1,650 Auxiliary circuit for hydraulic quick coupler: €1,000 Dozer blade float position: €270 Additional options at extra cost: Bucket package Class 04: 1 x Quick coupler MS03 2 x Heavy-duty digging buckets of choice 1 x Grading bucket with 1 cylinder, incl. 2x hydraulic hose with couplings for €3,657 Dipper stick 1,600 mm incl. extra counterweight 226 kg: €990 Tilt bucket package with hydraulic quick coupler: €5,919 Offer price without attachments plus delivery €950 All prices plus VAT. Subject to change, errors, misprints and prior sale.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 11,7 kW (15,91 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 1.910 kg, obratovalna teža: 1.910 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, Leto izdelave: 2026, obratovalne ure: 2 h, številka stroja/vozila: 3604834, Oprema: UVV varnostni pregled, dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, nastavljivo podvozje, parkirni grelec, 19 C-1 Pro standardna oprema: - podesivo podvozje i E. Prop. Nljdpfx Abjytrd Hs Hec - 230 mm široke gumene gusenice – Short Pitch - servo-hidrauličko ISO predupravljanje - Hidraulika za čekić/škare i rotacionu kašiku, elektro-proporcionalna - amortizovano vozačko sedište, tekstilna presvlaka - nemačka verzija - krak kašike 1100 mm - planirni štitnik (dozer daska) - cevovod do kraka kašike 1100 mm za pomoćnu hidrauliku (AUX I i II) - glavni prekidač akumulatora - zaštita od sunca - mašina za podmazivanje sa patronom - radio - halogeni farovi na kabini - Kabina: ROPS/TOPS testirana komforna kabina sa grejanjem i sigurnosnim staklom Doplatak za: Komplet kašika sa mehaničkim brzim izmenjivačem MS - 01 2 x uske kašike po izboru + 1 x hidraulična rovokopačka kašika po ceni od 2.790 € + PDV Akcijska cena uvećana za troškove prevoza do Eltmann 550 € Cene su u €, bez PDV-a; zadržavamo pravo na izmene, greške u tekstu, štamparske greške i međuprodaju.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NM0KCXTP6KMK91946, prevoženi kilometri: 184.692 km, moč: 367,75 kW (500,00 KM), prva registracija: 02/2022, vrsta goriva: dizel, lastna masa: 8.728 kg, največja dovoljena obremenitev: 44.000 kg, skupna masa: 18.000 kg, velikost pnevmatike: 315/70 R22.5, stanje pnevmatik: 80 odstotek, konfiguracija osi: 4x2, medosna razdalja: 3.590 mm, razmak osovin: 3.590 mm, naslednji pregled (TÜV): 02/2027, gorivo: dizel, zavore: intarder, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 16, emisijski razred: Euro 6, število postelj: 2, skupna dolžina: 5.911 mm, skupna širina: 2.540 mm, skupna višina: 5.911 mm, dovoljena osna obremenitev (os 1): 7.500 kg, dovoljena osna obremenitev (os 2): 12.000 kg, Leto izdelave: 2021, obratovalne ure: 3.555 h, Oprema: ABS, AdBlue, Bluetooth, EBS (Elektronski zavorni sistem), Tahograf, USB priključek, airbag, asistent za ohranjanje voznega pasu, centralno zaklepanje, drugi rezervoar za gorivo, električno nastavljivo ogledalo, elektronski program stabilnosti (ESP), greljenje sedeža, hladilnik, klimatska naprava, meglenke, parkirni grelec, računalnik na krovu, retarder, spojler, start-stop sistem, tempomat, Ponujamo najemno formulo z minimalnim trajanjem 36 mesecev, kar zagotavlja stabilnost in kontinuiteto na dolgi rok. Mesečna najemnina znaša 1.500 € brez DDV, kar pomeni pregledno in jasno stroškovno strukturo. - Vključen je tudi vzdrževalni pogodba, tako da vas ni treba skrbeti za servis ali dodatne stroške. Uživali boste v brezskrbni in profesionalni rešitvi, kjer sta kakovost in zanesljivost v ospredju. Nlsdpfx Aey N Ayrjb Hjc

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Nsdpfxsg Sk Tro Ab Hjlc Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: novo, največja dovoljena obremenitev: 36.461 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.480 mm, skupna višina: 860 mm, Leto izdelave: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings at the front central beam (LC 10,000 daN). C40/4 grating floor (point load 2.3 t on an area of 20 x 20 cm), over the axles checker plate covering. Two-part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections, hydraulic lifting system. Max load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length of 16,500 mm when in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in line with ECE R 141. Data transmission to the towing vehicle is via the standardised EBS interface according to ISO 11992. The towing vehicle must be able to receive and display this data for correct indication. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lift and lower valve. Axle tool kit. Brake System: WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to tractor unit. Electrical System: Electrical system according to EU regulations, LED lighting 24 V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15 pin. Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: Steel construction made of high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) Nlodow Dl Hwopfx Ab Hsc – S690QL/S700MC (yield strength 690 MPa) Curtainsider Structure: Curtainsider body, ??? 3,960 mm ??? - Galvanised front wall with a tensioning mechanism for sliding curtains. - "EDSCHA" roof, forward sliding on ALU roof beam profiles (bolted to front and rear wall). - 3 pairs of sliding stanchions in the loading platform. - The body is hydraulically extendable at the rear by approx. 750 mm left and right. - Sliding roof with upward folding portal beam. - Sliding curtain with 700 mm length reserve and tie-down straps approx. every 600 mm. Height upper edge of body approx. 3,960 mm (laden). - Driving with an open sliding roof is not permitted and will cause damage to the curtain. Paintwork: Entire steel structure is shot-blasted automatically after welding using a wheel blast system. Second blasting with corundum for optimal coating system adhesion. HRM-metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection. Final painting with two layers of 2K topcoat, single colour, shade selectable according to RAL 841GL. Rear section metalized and painted RAL 9010 (pure white). No metallic paint.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 30 km, moč: 125 kW (169,95 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 3.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 2.000 mm, Oprema: ABS, airbag, centralno zaklepanje, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, hidravlika, hladilna enota, klimatska naprava, letne pnevmatike, meglenke, nadzor oprijema, navigacijski sistem, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, spojler, tempomat, Nationwide delivery (at extra cost) Body: Refrigerated box body (capable of -18° Celsius) Refrigeration unit: Thermo King V-300 Max Standby refrigeration with 230 V power connection Cooling & heating function Seating capacity: 3 Fuel type: Diesel Transmission: Automatic Gross vehicle weight: 3,500 kg Tow bar: 3,500 kg Extra reinforced rear leaf springs Tail lift: BÄR 750 kg / 160 cm Roll stoppers Foot-operated control for tail lift Stop & Go function Mud flaps Floor mats Driver airbag ABS, ESP, ASR USB / AUX Multifunction steering wheel Power steering Center armrest Adaptive cruise control Blind spot assist Lane keep assist Electrically heated mirrors Electric windows On-board computer Seats: Black fabric Central locking with remote control Air conditioning MBUX 10 Radio with Bluetooth function Navigation system Hands-free kit Cyclist underrun protection Lashing rails Cold curtain Lockable toolbox Interior lighting Roof & side wind deflectors Nljdpfx Abewdta Se Hjc Heavy-duty version Cyclist underrun protection LED side marker lights LED lighting Reverse camera (optional, at extra cost) The details provided online are non-binding descriptions and do not constitute guaranteed features. The seller is not liable for typographical or data transmission errors / changes / entry errors. Please check the correctness of the equipment features directly on the vehicle before purchase. Subject to errors / prior sale. This ad is to be understood as an invitation to submit an offer.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NM0KCXTP6KPJ97993, prevoženi kilometri: 85.689 km, moč: 368 kW (500,34 KM), prva registracija: 12/2023, vrsta goriva: dizel, lastna masa: 8.973 kg, največja dovoljena obremenitev: 10.027 kg, skupna masa: 19.000 kg, velikost pnevmatike: 315/70 R22.5, konfiguracija osi: 4x2, medosna razdalja: 3.750 mm, naslednji pregled (TÜV): 12/2026, gorivo: dizel, Izpusti CO₂: 54 g/km, kapaciteta rezervoarja za gorivo: 1.350 l, zavore: retarder, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število postelj: 1, skupna dolžina: 6.160 mm, skupna širina: 2.540 mm, skupna višina: 3.952 mm, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 12.600 kg, obratovalne ure: 1.871 h, Oprema: ABS, AdBlue, Bluetooth, EBS (Elektronski zavorni sistem), Tahograf, USB priključek, airbag, centralno zaklepanje, drugi rezervoar za gorivo, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), filter saj, greljenje sedeža, hladilnik, klimatska naprava, meglenke, nadzor oprijema, nadzor tlaka v pnevmatikah, navigacijski sistem, parkirna klimatska naprava, parkirni grelec, popolna servisna zgodovina, računalnik na krovu, retarder, sistem za pomoč pri speljevanju v klanec, spojka prikolice, spojler, tempomat, zapora diferenciala, Ponujamo najemno formulo z minimalnim trajanjem 36 mesecev, kar zagotavlja stabilnost in kontinuiteto na dolgi rok. Mesečna najemnina znaša 1.500 € brez DDV, kar pomeni pregledno in jasno stroškovno strukturo. - Nlsdpfx Aboybb U Rs Hoc Vključen je tudi vzdrževalni pogodba, tako da vas ni treba skrbeti za servis ali dodatne stroške. Uživali boste v brezskrbni in profesionalni rešitvi, kjer sta kakovost in zanesljivost v ospredju.

Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment. Complete specification available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick. Loading area with 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing Gear: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 205/65 R17.5 tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Axles: * BPW axles, two rigid and two self-steering axles * Air suspension with lift/lower function * Drum brakes * Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually Brake system: * WABCO brake system compliant with EU regulations and EBS-E (4S3M) Electrical system: * Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel structure made of high-strength fine grain steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection * Trailer colour RAL 3002 Carmine Red * Rims Silver Grey * Tarp RAL 9006 (brilliant direct) Options included: Nlodoy Aug Dopfx Ab Hsc * At the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket * 2-inch king pin * One galvanized steel front wall * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder on the front wall * 3 tiers of wooden boards * Galvanized folding supports under the loading area bevel * One bracket for a revolving warning light at the rear end of the trailer * Height-adjustable curtain structure – approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains. Height adjustable by approx. 400 mm * Roof brand EDSCHA, can be slid forward on ALU roof profile beams (bolted to front and rear wall) * 3 pairs of movable stanchions in the loading area * Body hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarp with 700 mm reserve in length; tie-down straps at approx. 600 mm intervals. Height upper edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will damage the tarp * Body at the rear closed with anodized ALU swing doors * Latch-on rail for ALU loading ramps at the rear of the vehicle * Control valves for hydraulic widening fitted to the right-hand side of the trailer * White reflective tape as per EU regulations on the sides, red at the rear * Electro-hydraulic unit under the rear loading area * One mudguard at the rear of the trailer * European reflective signs (red-yellow) at the rear of the trailer * Hand…

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) Njdpsy Auh Isfx Ab Hjlc * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: Nlsdpfx Aboy Auhuj Hjc * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide Nedpervw U Sofx Ab Hjlc • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: rabljeno, največja dovoljena obremenitev: 44.420 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 11.500 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment. Complete equipment details on request. Loading platform: * Loading bed with approx. 30 mm thick hardwood floor * 9 pairs of folding lashing rings towards the outside (LC 10,000 daN) * 10 pairs of stake pockets in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm Landing gear / Support legs: * Hydraulic landing gear Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is carried out via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical capacity 10,000 kg each, first axle hydro-mechanically steered, second axle fixed, and third axle hydro-mechanically forced-steered, mounted on turntable * Air suspension with raise/lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin connectors according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Coating: * Entire steel construction shot-blasted automatically after welding using a turbine blast machine * Second blasting treatment with corundum for optimal adhesion of the coating system * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Jet Black as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Coating tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Nlsdjyu Eu Ijpfx Ab Hec Included accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * DUOMATIK air couplings at the galvanized connection rail at the front * Storage for approx. 1,000 mm plug-in stakes, rear in the central beam * On the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket * White reflective tape in accordance with EU regulations on the sides and red at the rear * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform * European reflective plates (red-yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * Manual and description on USB stick * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump cover * 4 wheel chocks with holder on the front wall * Steering from the front and rear via cable remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stake pocket bars mounted in the loading plat

Stanje: novo, lastna masa: 670 kg, skupna masa: 2.000 kg, buy online at trailer-shop Many models available online at ANHÄNGERWIRTZ Nsdpemrr Dljfx Ab Holc Convenient and round the clock 24/7 online purchasing Pick up yourself or have delivered. The online pick-up market for your new trailer offers strong brand manufacturers! over 850 new trailers in stock over 130 used trailers permanently on offer. Non-binding example: New price, invoice, dealer warranty, VAT deductible SARIS KIPPER K1 2 E 276X150X30CM ELECTRIC BLACK EDITION 13" 2000KG Rear tipping trailer K1 276x150x30cm, high loader tandem V chassis 2000kg, black powder-coated aluminium side panels with tension locks, folding front wall, electro-hydraulic tipping with own battery via charging connector, DIN lashing eyes rubber-mounted and recessed in chassis edge, automatic jockey wheel, steel floor protection plate... including side extension TSZ +60cm pre-installed.... Sales & phone orders accepted at the following times: MON. - FRI. 08:00 - 12:30 & 14:00 - 18:00 or 24/7 via our trailer shop Copyright – Trademark protection 09/25 99K10000425+ TSZBWSA60

Stanje: novo, skupna masa: 2.600 kg, Leto izdelave: 2025, new and ready for pickup by prior telephone arrangement at Cheval Liberté Neuss am Rhein. Phone, Monday to Friday during the day: 02131 595 4218. Non-binding description, while stocks last! Technical data: 2-horse trailer with 240 cm interior height (not suitable for draft horses) Permissible total weight: 2,600 kg Curb weight: approx. 960 kg Nsdpfx Ajyf Ni Rsb Hjlc Payload: approx. 1,640 kg Interior dimensions: 378 x 181 x 225 cm (L x W x H) External dimensions: approx. 503 x 229 x 272 cm (L x W x H) Overrun braked Automatic jockey wheel—protected installation with maneuvering handle Pullman chassis, suitable for 100 km/h Construction specifications: ALUMINIUM floor Side walls/superstructure anodized double-walled aluminum Roof & front made of colored full polyester, black Variable tack room, partition removable Features: luggage net, saddle holder, make-up mirror, bridle holder, lockable door, door retainer Feed troughs not included, available optionally Chassis: Pullman 2, independent wheel suspension with coil springs and shock absorbers Height of divider bars: approx. 102 and 122 cm Distance between divider bars: approx. 175 and 187 cm Rear ramp holds up to approx. 700 kg Rubber mat with tread strips and anti-slip surface Combination of double-wing door and rear ramp Overrun device & brakes by KNOTT Modern 13-pin lighting connector Vehicle registration certificate & COC papers included in the price. Registration with green plate for sporting purposes possible Price incl. 19% VAT, shown on invoice from authorized dealer, with warranty Further details: External tying points Internal tying points Stainless steel tying bar mounted on the right, suitable for feed troughs Tall ALU entry door right, incl. sliding window/lockable aluminum handle PVC clear partition wall Single wheel arch covers in black plastic Multiple sliding windows Rubber-sealed floor Hay net hooks Kick protection on side walls (GRP plastic) Maneuvering handle Roll-up tarp as net Gas strut mechanism on rear ramp Step on rear ramp 3rd brake light on rear ramp Lighting system with reversing lights Additional accessories available: - Protective cover for automatic jockey wheel - AKS anti-sway coupling - Reduction of total mass - Alloy wheels for new orders - Camera system - Curved black saddle holder - Hanging feed trough with bracket - Anti-theft devices & GPS Location: Neuss am Rhein - Pick-up dates Monday to Friday by appointment at 02131 595 3218 04.26

Stanje: novo, največja dovoljena obremenitev: 36.360 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Neck (Gooseneck): * Gooseneck with front corners tapered approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square profile climbing strips approx. 15 x 15 mm as well as lower-width extensions * Between the first and second axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) – max. point load 5 t/each * Recess in the bevel as well as projecting into the loading area for excavator dipper stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) Nlodpfx Absyhkq Us Hjc * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cutouts in the outer frame of the loading area for fastening ratchet straps (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm hardwood covering * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final painting with 2 coats of 2-component topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL 841GL system * Rims in silver grey Including the following additional equipment: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Rear electro-hydraulic unit, under the loading area * On the gooseneck, aluminium side and rear plug-in walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the tapered gooseneck * 2 pairs of WADER container pockets in the loading area for one 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * 3 additional pairs of removable, galvanized covers over the wheel recess – max. point load 3.5 t/pc * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hang-in intermediate table, approx. 300 mm wide * Interm

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. Njdotx Nwnepfx Ab Holc GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Nlsdsw Tpq Dopfx Ab Hec Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: Nsdpfjxttc Ajx Ab Holc * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: novo, * IMMEDIATE AVAILABILITY * Includes liftable banner roof / fold-out stairway / LED interior lighting / 230V electrical distribution Technical Data: • Brand: Vezeko • Model: VE 27.46 SP • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: Without first registration • General inspection (TÜV): 2 years from initial registration • Interior dimensions (LxWxH): 460 x 216 x 235 cm • Exterior dimensions (LxWxH): 623 x 220 x 307 cm • Permissible total weight: 2,700 kg • Unladen weight: 1,310 kg • Payload: 1,390 kg • Chassis: High loader (wheels underneath the structure) • Tyres: 195/55R10C • Suspension: AL-KO rubber torsion axle • Support wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Sturdy V-drawbar, hot-dip galvanised • AL-KO overrun brake system • Extremely robust, fully welded frame, hot-dip galvanised • Fold-out stairway on the right-hand side (direction of travel) incl. canopy • Easy stair deployment via gas struts • Turn bar lock fitted externally on the side flap (not internally as shown) • Side flap dimensions: approx. 3,420 mm x 2,200 mm • Handrails on both sides of the steps • 4 heavy-duty corner steadies with crank handle • 230 V CEE power supply input • Multiple available power outlets • 2 LED light strips inside with switch • Walkable roof • Fold-out advertising board with gas struts on the roof • Drawbar step in front of the entrance door • Manoeuvring handles • Automatic support wheel • Extension rod for easy flap operation • Sturdy 50 mm insulated sandwich box body • Outer layers made of hot-dip galvanised and powder-coated steel sheet • AL-KO coupling head with collision guard Nedpex Tcd Sofx Ab Holc • Steel mudguards • 13-pin plug • Reversing light • Large-format safety lighting • Integrated rear fog light Optional accessories (retrofittable) – please enquire: • Anti-theft device • 100 km/h approval with shock absorbers • And much more New vehicle with warranty and TÜV approval. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export plates with customs declaration possible Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! For over 30 years: Authorised dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, omissions, and prior sale excepted -

Stanje: rabljeno, prevoženi kilometri: 42.582 km, moč: 96 kW (130,52 KM), prva registracija: 08/1984, vrsta goriva: dizel, skupna masa: 7.490 kg, barva: rdeča, vrsta prenosa: mehanski, število sedežev: 3, prostornina tovornega prostora: 16 m³, dolžina tovornega prostora: 3.780 mm, širina tovornega prostora: 2.370 mm, višina nakladalnega prostora: 1.800 mm, Oprema: pogon na vsa štiri kolesa, * 3314 - ID vozila za telefonska povpraševanja * Posebno vozilo: Gasilsko vozilo, RW-1 Nsdpszc T Hbsfx Ab Hslc * 3-sedež * Pogon na vsa kolesa, zapora diferenciala, 8-stopenjski ročni menjalnik / menjava smeri, motorna zavora, parkirna zavora na vsa 4 kolesa, dodatno gretje, zadnje okno, strešna loputa, vlečna kljuka z zračnimi in električnimi priključki * Keson s ponjavo, stranske deske, pritrdilne zanke * Nakladalna ploščad Dautel 1.000 kg, nakladalna višina: 1,75 m, plošča zložljiva * Gume spredaj: 12.5-20 (15 / 15 mm) * Gume zadaj: 12.5-20 (15 / 15 mm) ----naš E-poštni naslov:     naša ponudba za vas:       - Ureditev začasnih ali carinskih registrskih tablic       - Prevoz / dostava po celotni EU       - Carinjenje vozil v tretje države Če imate vprašanja v ruskem jeziku, lahko pokličete na naslednjo številko * WhatsApp samo za govorce ruskega jezika: * WhatsApp za angleščino, nemščino in druge jezike:

Stanje: rabljeno, prevoženi kilometri: 14.215 km, moč: 81 kW (110,13 KM), prva registracija: 05/1980, vrsta goriva: dizel, skupna masa: 6.500 kg, vrsta prenosa: mehanski, število sedežev: 2, Leto izdelave: 1980, Oprema: pogon na vsa štiri kolesa, žerjav, Very well-maintained Unimog U1100 from first owner. Atlas AK 3006 A crane with 1x hydraulic extension, a maximum working height of 10 meters, and a 5th + 6th hydraulic circuit (e.g. for grab, bucket). The vehicle has only 14,215 km and 839 operating hours. Collector's condition. * Atlas AK 3006 A Nodozdcvzopfx Ab Hslc * 3,300 kg at 2.93 m * 1,620 kg at 4.77 m * 1,200 kg at 6.07 m * Optionally with 3x mechanical extensions * 980 kg at 7.42 m * 730 kg at 8.73 m * 520 kg at 10.04 m * Working height: 10 m * Additional hydraulic circuit on crane for e.g. rotator, grab * 4-fold outriggers * Remote ground control * Front hydraulics for e.g. snow plough * All-wheel drive with selectable differential locks * Trailer coupling 2x * Reversing transmission 8 forward + 4 reverse gears * Air suspension driver’s seat * Engine: OM 352, 6-cylinder, 5,638 cc, 81 kW * Approval as self-propelled working machine possible * Odometer: 14,215 km * Hour meter: 839 h * The vehicle is from first owner Financing available through our partner banks – we are happy to help. We expressly reserve the right of prior sale, as this item is also offered on other platforms. All accessory information is given without guarantee. Subject to change, interim sale or errors. We strongly recommend and offer on-site inspection and testing to ensure the buyer has an accurate understanding of the condition and suitability. Viewings and inspections are possible and expressly welcome at any time by prior appointment.

Stanje: rabljeno, prevoženi kilometri: 743.863 km, moč: 213 kW (289,60 KM), prva registracija: 09/2015, vrsta goriva: dizel, število sedežev: 43, vrsta prenosa: samodejen, naslednji pregled (TÜV): 03/2026, emisijski razred: Euro 6, barva: bela, zavore: retarder, Leto izdelave: 2015, Oprema: ABS, klimatska naprava, parkirni grelec, MAN A78 LE Ü | Klima | Retarder | 1. lastnik | ? Leto izdelave ? MAN motor 213 kW / 290 KM ? 6871 cm³ - Euro 6 ? 743.863 km ? 1. lastnik ? 5-stopenjski retarder ? Tempomat ? Avtomatski menjalnik ? Klimatska naprava ? Webasto parkirni grelec ? 43 + 1 sedežev ? 32 stojišč ? 4x izklopna okna ? 2 vrata ? Klančina za invalidski voziček ? Sprednje pnevmatike cca. 40 % ? Zadnje pnevmatike cca. 20 % Tehnični pregled do 03 / 2026 Nsdpfx Ajy Uvavsb Holc Pridržujemo si pravico do sprememb in napak.

Stanje: rabljeno, prevoženi kilometri: 62.191 km, moč: 108 kW (146,84 KM), skupna masa: 3.500 kg, največja dovoljena obremenitev: 1.140 kg, prva registracija: 02/2025, emisijski razred: Euro 6, Za informacije Nodpezcg Nvsfx Ab Holc

Stanje: rabljeno, prevoženi kilometri: 195.953 km, moč: 108 kW (146,84 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, največja dovoljena obremenitev: 650 kg, prva registracija: 04/2024, Za informacije Njdpfx Aoy Idrmeb Hjlc