Meierling Samovozni Polpriklopnik nakup rabljenega (6.859)

Stanje: novo, največja dovoljena obremenitev: 34.500 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, skupna višina: 350 mm, Oprema: ABS, MAX Trailer Type 510 NEW | Hydraulic Pendle Axle – extendable | 34t payload | 2 axles | from €136,900 Hodpfxeypa Ife Alxop New vehicle – can be customized to your specific field of application. High payload with robust construction for maximum cost-efficiency. ----Technical Highlights • Hydraulically liftable and lowerable gooseneck with approx. 23,000 kg fifth wheel load • SUPER LOW low bed trailer, extendable, with approx. 40 mm hardwood flooring • Hydraulically forced-steered pendle axles with axle equalization • Rear axle steering conveniently controlled via cable remote • Heavy-duty lashing points for professional cargo securing • Continuous excavator trough for versatile transport tasks ----Chassis & Safety • WABCO EBS brake system in accordance with EU regulations • Tire Pressure Monitoring System (TPMS) • 245/70 R17.5 tires • LED lighting system Short. Strong. Ready. ----Construction & Durability • High-strength fine-grain steel construction • Metallized vehicle chassis with premium corrosion protection • Multi-layer paint system for extended service life • Cavity sealing with special wax ----Included Options • Galvanized front wall + spare wheel • Electro-hydraulic unit • Preparation for 20'/40' container transport • Load gauge incl. load diagram • Central lubrication system BEKAMAX • Extendable warning panels with LED • Beacon holder ----Other equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary according to configuration.

Stanje: novo, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, MAX Trailer Type 100 NEW | Extendable | 39t Payload | 3 Axles | from €66,900 New vehicle – individually configurable to suit your application. High payload capacity with rugged construction and maximum cost-efficiency. Hedpfx Aljypa Npexop --- Highlights: • Approx. 39,600 kg payload • Loading platform 8,600 mm + 5,400 mm extendable • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system --- Technical Data: • Gross vehicle weight: 49,500 kg • Unladen weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm • Overall width: 2,540 mm • Speed: 80 km/h --- Standard Equipment: • Extendable loading platform with durable hardwood floor • Galvanised steel ramps with hydraulic lifting mechanism • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) --- Included Options: • Spare wheel with holder • Galvanised front wall (approx. 400 mm) • Electro-hydraulic power pack under loading platform • Extendable warning signs with LED • Reflective tape in accordance with EU regulations • Rotating beacon holder at rear • Ramp control valves on right side Additional equipment and individual adaptations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 39.000 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, Oprema: ABS, MAX Trailer Type 110 NEW | Hydraulic steering – extendable | 39t payload | 3 axles | from €97,400 New vehicle, customizable to your specific operation requirements. High payload with robust design and maximum cost-efficiency. ----Highlights: • Extendable loading platform with durable 48 mm hardwood floor • Galvanized steel ramps with hydraulic lifting mechanism (up to 40,000 kg load capacity) • Hydro-mechanically forced-steered BPW axles with air suspension • Heavy-duty lashing points for professional load securing • WABCO EBS braking system according to EU regulations • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Body & Construction Hodpfjypa Rgox Alxop • High-tensile fine-grained steel construction • Metallized vehicle chassis for optimal corrosion protection • Multi-layer paint structure with additional cavity sealing • Checker plate above axles for increased durability Very important for trust. ----Included options • Galvanized front wall (approx. 400 mm) • Electro-hydraulic power pack • Convenient cable remote steering • Spare wheel with holder • Galvanized folding supports • Extendable warning panels with LED • Beacon bracket • Reflective tape according to EU regulations ----Further equipment and customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 39.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 875 mm, Oprema: ABS, Kässbohrer SLS 3 ECO | Rigid Low Loader | from €58,300 - New Vehicle / Stock Vehicle / Incoming – also individually configurable to your operational requirements. The Kässbohrer SLS 3 ECO is a robust and economical rigid low loader designed for daily use in machinery, construction, and specialized transport. With its low loading height, durable construction from high-strength S700 MC steel, and proven Kässbohrer technology, this trailer offers maximum payload capacity alongside high durability and straightforward handling. ----Highlights * Low platform height for easy loading and unloading * Sturdy construction from S700 MC high-strength steel * High payload with optimized tare weight * 3-axle chassis with BPW axles and air suspension * Hydraulically operated ramps with high load capacity * Widening system for flexible transport widths ----Technical Specifications Hsdpfxeypa Acj Alxsp * Saddle height: approx. 1,250 mm * Platform length: approx. 9,240 mm * Gooseneck length: approx. 3,950 mm * Platform height: approx. 875 mm * External length: approx. 13,190 mm * Total width: 2,550 mm + extensions * Axles: 3 × BPW with air suspension * Axle load: 30,000 kg (3 × 10 t) * Permissible gross weight: * 48,000 kg at 80 km/h * 52,800 kg at 60 km/h * Unladen weight: approx. 9,766 kg ----Chassis & Technology * 2 rigid front axles, 1 trailing rear axle * Manual axle lift on the 1st axle * WABCO EBS 4S/3M braking system with ABS & RSS * LED lighting system compliant with ECE R48 * 24V electrical system with multiple sockets ----Body & Equipment * 45 mm hardwood floor on the platform * Gooseneck with reinforced steel construction * Mechanical supports front & rear * Rear with 10° angled approach ramp * Loading ramps: * Load capacity up to 40 t * Length approx. 2,750 mm * Hydraulic sliding system ----Load Securing * Lashing rings in gooseneck and platform area (5,000 – 10,000 daN) * Stake pockets along the platform * Container locks for 1×20 ft * Extendable platform widenings ----Accessories * Steel toolbox * Beacon light * Rear LED work lights * Extension markers incl. LED position lights * Wheel chocks with holder ----Additional Information Further equipment and individual modifications are always possible – we configure your vehicle precisely according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 34.700 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 3.930 mm, Oprema: ABS, Horizontal Silo Semi-Trailer NEW | 31–38 m³ | Lightweight Aluminum Construction | from €59,900 New vehicle – individually configurable for your specific application. Horizontal silo semi-trailer in robust lightweight aluminum construction for the efficient transport of bulk materials. Also available with a capacity of 31 m³ and 38 m³. ---Highlights--- • Horizontal aluminum lightweight silo semi-trailer • Volume options: 31 m³, 35 m³ or 38 m³ • High payload with low tare weight • Operator-friendly and safe discharge system • Low-maintenance, durable design for daily use ---Technical Data--- • Design: Horizontal silo semi-trailer • Volume: 31 m³ to 38 m³ (depending on configuration) • Tank: Welded aluminum silo body • Chambers: Single-compartment • Manholes: 2 × DN 450 • Discharge: Rear outlet DN 100 Hedpsypa Avsfx Alxsp • Operating pressure: up to 2.0 bar • Test pressure: up to 3.0 bar • Operating temperature: approx. –20°C to +80°C ---Standard Equipment--- • Aluminum walkway with anti-slip safety grating • Foldable scissor-type guard rail in accordance with UVV regulations • Rear-mounted aluminum access ladder • 2" top air line at the front • 3" side air line (left) with Storz coupling • Non-return and ventilation valves • Anti-slip strips in manhole area • Sight glass at outlet • Hose mounts for compressed air hoses • Integrated toolbox ---Chassis & Safety--- • 3 BPW axles with air suspension and disc brakes • Automatic lift axle (depending on axle configuration, EBS controlled) • EBS braking system with stability control • Tire pressure monitoring system (TPMS) in compliance with ECE R141 • LED lighting system according to EU regulations • White reflector strip on sides, red rear marker strips ---Included Options / Accessories--- • Wheel nut covers with manufacturer’s logo • Load monitoring pressure gauge • Work light at the tank • Mechanical JOST support legs • Aluminum rims (manufacturer’s choice) Further equipment and individual modifications possible at any time – we configure your vehicle precisely to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, New vehicle / stock vehicle / inbound delivery? Also available in various volumes / from €42,500,-- For sale: Wielton Bulk Master tipping semi-trailer 51 m³, designed for heavy-duty applications in bulk, agricultural, and mass transport. The Bulk Master is available in various versions with body volumes from approx. 37 m³ to approx. 67 m³. Note: The equipment specified below describes a current stock or pre-ordered vehicle. Dimensions, weights, volumes, and specifications may vary depending on the vehicle, production status, or individual customer configuration. --- Dimensions / Weights --- Total length: 11,087 mm * Internal length (measured at centre of body height): 9,890 mm * Floor length: 9,270 mm * Total width: 2,550 mm * Internal width (measured at centre of body height): 2,460 mm * Internal width at upper frame: 2,350 mm * Total height to upper frame: 3,500 – 3,550 mm * Total height to top of tarpaulin: 3,660 – 3,710 mm * Internal height: 2,100 mm * Track width: 2,040 mm * Kingpin to 2nd axle distance: 6,710 – 6,810 mm * Saddle height: 1,150 – 1,200 mm * Axle spacing: 1,310 – 1,410 mm * Rear overhang: 1,362 mm * Floor height: 1,400 – 1,450 mm * Max. height, body tipped: 9,860 – 9,910 mm * Gross weight: 36,000 kg * Technical gross weight: 42,000 kg * Axle load: 8,000 kg (technically 9,000 kg) * Fifth wheel load: 12,000 kg (technically 15,000 kg) * Load volume: approx. 51.1 m³ * Manufacturer designation (homologation): NW-3 * Unladen weight: approx. 6,146 kg (weight tolerance ±3%) --- Chassis / Technology --- Steel underrun protection * Rear foldable underrun guard * Saddle height unladen approx. 1,150 mm * SAF disc axles 3 × 9,000 kg, 22.5" INTRADISC CD Hjdpjypa Eksfx Alxjp * 1st axle as lift axle * Tyres 6 × 385/65 R 22.5 (manufacturer as desired) * Toolbox 165 l, mounted left mid-section * Water tank 30 l, mounted right mid-section * Dust bag holder * Shovel and broom mounted on front wall --- Body / Tipping Body --- Combi door version * Volume: 51 m³ * Front wall 20° angled * Side walls heavy-duty, internal thickness 3.9 mm, fully welded * Internal height 2,100 mm * Double-wing aluminium combination door (left + right), vertical, with portal beam * 2 grain discharge chutes * 2 lower tension locks * Pallet-width design * Cross member spacing in floor: 360 mm * Floor thickness 5 / 7 mm * Tension chain between side walls * Control station on front wall, access on left in direction of travel --- Cover --- PVC rolling tarpaulin 680 g/m² --- Brake system / Pneumatics --- Aluminium air tank * Spring pressure manometer * Automatic lowering when tipping, can be switched off * WABCO brake system 2S/2M --- Hydraulics --- HYVA hydraulic cylinder, eye mounting at top * Tipping angle indicator --- Electrical --- Full LED lighting * 2 LED work lights on side impact guard * 2 LED reversing lights * 2 × 7-pin + 1 × 15-pin, incl. EBS connection (without cables to tractor unit) * Aspöck ECOLED II lighting with flashing side marker lamps --- Additional Systems --- ABERG TPMS – tyre pressure and temperature monitoring * Control line for lift axle from cab --- Paintwork --- Chassis: RAL 7021 black grey * Body: RAL 9006 white aluminium * Tarpaulin: RAL 9006 white aluminium --- Other volumes (approx. 37–67 m³), equipment, and customised solutions available at any time – we configure your vehicle exactly to your requirements. Example photo. Features may differ depending on configuration.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2020, prostornina tovornega prostora: 92 m³, Oprema: ABS, Standard model, suitable for transporting dry bulk materials and palletized loads. - Chassis made of STEEL, preconfigured for Cargo Floor - 1st axle as lift axle - 3 SAF rigid axles, 9 tons each, with disc brakes Ø 430 mm - Air suspension with manual lifting/lowering valve - Support legs with universal foot (flat plate + half wheel) - EBS WABCO braking system 2s/2c - A.D.R. electrical system - Pneumatic parking brake - Wheel chocks and holders - Lateral safety guards - 6 PVC mudguards - 2 PVC toolboxes Internal dimensions: Length: 13,542 mm – Front height: 2,660 mm – Rear height: 2,814 mm – Width: 2,475 mm – Capacity: 92 m³ External dimensions: Length: 13,665 mm – Width: 2,542 mm – Height above ground: 4,000 mm – Fifth wheel height: 1,150 mm – Gross vehicle weight: 39,000 kg Moving Floor: CF500 Cargo Floor (moving floor) with 21 aluminum slats, thickness 10 mm, standard (smooth, longitudinally ribbed) - Rear floor section (300 mm) of stainless steel, approx. 4 mm thick - Remote control in a waterproof control box - Max. pressure valve (225 bar) and high-pressure oil filter - Board movement: 200 mm/cycle Subframe: - Made entirely from extruded aluminum profiles (cross members) - Moving floor supported longitudinally by aluminum tubes - Corrosion protection via polypropylene films between aluminum and steel Front wall: - Made of aluminum profiles 600/30/3/2 mm with reinforced upper profile - Front walkway with 2 ladders for accessing side tarpaulin - Connection strip (with sockets) for brake, lighting, and hydraulic systems - Upper square reinforcement plates between front and side walls Movable bulkhead: - Made of aluminum profiles and tarpaulin hem on the floor, with reinforced battens for tarpaulin attachment - Sliding partition, suspended on trollies with slide bearings on 2 rails Side wall: - Made of aluminum profiles 600/30/3/2.5 mm, inside and outside welded to contour - Upper circumferential profile with rail for movable partition Rear frame: - Made of aluminum profiles with 2 doors of aluminum profiles 600/30/3/2.5 mm, surrounding door profile 50 mm, double seal - 4 aluminum hinges with galvanized pin (vertical), upright with handle, fully bolted stainless steel lock with vertical rod for each door - Rotatable upper rear cross brace (one piece) - Safety device for door release (pneumatically actuated) Roof: - 4 removable roof bows - Vertical tarpaulin securing straps, with 4 lateral tension belts - 2 straps running the full length - Tarpaulin 900 g/m² Hedpfxoypa Hbo Alxsp - Mounting the right tarpaulin by rivets along the top profile Paintwork: - Chassis color: MENCI SILVER GREY - Body color: MENCI SILVER GREY - Tarpaulin color: RAL 9006 Standard equipment: - 4 safety hooks for tarpaulin - Holder for shovel, broom, and rake - Manometer for weight control (63 mm diameter) in the moving floor control box - Compressed air gun connection at rear left - Prepared for tarpaulin roller (floor tarpaulin) at rear - Rear foldable guard for taillights Optional extras: - 6 SPEEDLINE alloy wheels 385/65 R 22.5, offset 120 - RADIO REMOTE CONTROL All details without guarantee!

Stanje: novo, največja dovoljena obremenitev: 34.720 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, DOLL LOGO 10X NEW | 3-Axle Stake Semi-Trailer | approx. 34.7 t Payload | Timber Transport | ¤ 59,500 New vehicle | Customizable to your specific operational needs. 3-axle stake semi-trailer with dropped frame design for professional long and round timber transport. Engineered for high payloads, rugged forestry and on-road operations, and maximum loading flexibility. Highlights - Approx. 34,720 kg payload - 3-axle stake semi-trailer for long and round timber - LOGO-10X version with reinforced frame drop - 6-stake configuration with variable loading options - SAF axles with disc brakes - Lift axle (1st axle) - Weight display in the cab (CAN bus) - Full-LED lighting with dynamic indicators Technical Data - Perm. gross weight: 39,500 kg - Fifth wheel load: 12,500 kg - Axle load: 27,000 kg - Unladen weight: approx. 4,780 kg - Payload: approx. 34,720 kg - Overall length: approx. 9,195 mm - Load bed length (B-dimension): approx. 8,650 mm - Width: 2,550 mm - Laden coupling height: approx. 1,100–1,250 mm - Laden stake top edge height: approx. 1,080 mm - Max. overall height: 4,000 mm Standard Equipment - High-strength, FEM-optimized fine-grained steel frame - 2" king pin, bolted and replaceable - 6 ExTe steel stakes in LOGO-10X layout - Telescopic aluminium stanchions - SAF axles 9 t with disc brakes (ET120) - Electronic braking system EBS-E incl. ABS - Conventional air suspension with automatic lift axle - Side underrun protection to ECE-R73 - Rear underrun protection to ECE-R58-3 - Aluminium air tanks - Brake and electrical lines routed in protected positions Included Options / Features (extract) - Weight display via CAN bus in the driver’s cab - Tyre pressure monitoring system (TPMS) - Lift axle on 1st axle - Steel frame covers in the dropped section Hedpfoypa Hzox Alxjp - Checker plate cover at rear - Full-LED lighting to ECE-R48 - LED work lights at sides and rear - Multiple gripper guards - Continuous mudguard with DOLL logo - Contour marking to ECE standards - TÜV inspection / vehicle documentation Further equipment and individual adaptations available at any time — we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 33.570 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, DOLL LOGO 12X NEW ? 3-Axle Bunk Semi-Trailer | approx. 33.5 t Payload | from €38,500 New vehicle ? custom-configurable to your field of application. Robust bunk design for road and off-road (forest) use with high payload capacity. Highlights: ? Approx. 33,570 kg payload ? 3-axle bunk semi-trailer for long timber & roundwood ? 8 bunks ? versatile loading options ? SAF axles with disc brakes ? Full LED lighting with dynamic indicators ? Weight display in the driver’s cabin (CAN bus) Technical Data: ? Perm. gross weight: 39,500 kg ? Unladen weight approx.: 5,930 kg ? Axle load: 27,000 kg (9,000 kg per axle) ? Kingpin load: 12,500 kg ? Total length: 12,616 mm ? Loading length: 12,450 mm ? Width: 2,550 mm ? Coupling height loaded: approx. 1,100 – 1,250 mm Standard Equipment: ? High-strength, FEM-optimized frame made of fine-grained steel ? 2" kingpin, replaceable ? 8 DOLL steel bunks MAMMUT ? 16 aluminium stakes, loading height approx. 2,479 mm ? SAF axles 9 t with disc brakes & EBS ? Lift axle (1st axle) ? Air suspension with raise/lower function ? Front wall according to EN 12642 Code L ? Full LED lighting, incl. work lights ? Underrun and rear impact protection to ECE standard Included Options / Accessories: ? Weight indicator via CAN bus ? Tire pressure monitoring system (TPMS) ? Continuous walkway/covering made of steel chequer plate ? Contour marking as per ECE ? Mudguards with DOLL logo ? Rear marker board ECE 70 ? COC document for registration Further equipment and individual customizations always available ? we configure your trailer exactly to your specifications. Sample photo. Features may vary depending on configuration. Hjdpfx Alsypa H Iexop

Stanje: novo, največja dovoljena obremenitev: 31.950 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 30 m³, Oprema: ABS, Kässbohrer STC Chemical Tank Stainless Steel | ADR NEW | insulated | from €104,700 New vehicle – specially designed for the safe transportation of chemical products. Robust stainless steel construction with ADR certification and high-quality insulation. Engineered for demanding chemical and hazardous goods transport operations. Highlights - Stainless steel chemical tank 30 m³ - ADR approved (hazardous goods transport) - Insulated tank with heating channels (steam/water) - BPW axles with air suspension and disc brakes - EBS brake system with electronic stability control - High-quality stainless steel and aluminum components - Tire Pressure Monitoring System (TPMS) according to ECE R141 Technical Data - Total volume: 30,000 liters - Compartments: 1 compartment with baffle walls (7,500-l segments) - Gross weight: 39,000 kg - Unladen weight: approx. 7,050 kg - Axle load: 27,000 kg (3 axles) - Fifth wheel load (king pin): 12,000 kg - Operating temperature: up to 150 °C Hjdeypa H Uspfx Alxop - Operating pressure: 3.0 bar - Test pressure: 4.0 bar Standard Equipment - Cylindrical tank made of stainless steel AISI 316Ti - 100 mm glass wool insulation, stainless steel outer cladding - 4 DN 500 manholes with domed trays - Aluminum walkway along the entire tank length - Foldable stainless steel guardrail & safety-compliant access ladder - Heating channels for steam or hot water heating - Pneumatically operated bottom valve DN 80 - BPW axles with disc brakes - KNORR / WABCO EBS 2S/2M with RSS - Electronic air suspension ECAS - LED lighting system (ASPÖCK) Included Options - Tire Pressure Monitoring System (TPMS) - Stainless steel toolbox - ADR equipment incl. warning panels & hazardous goods placards - Aluminum underrun protection side and rear - Hose storage left & right - Fire extinguisher box - Wheel nut covers with Kässbohrer logo Further equipment and individual customization available at any time – we configure your vehicle precisely to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2020, prostornina tovornega prostora: 92 m³, Oprema: ABS, Standard model, suitable for transporting dry bulk materials and palletized loads. - Chassis made of STEEL, pre-fitted for Cargo Floor. - 1st axle as lift axle - 3 rigid SAF axles, 9 tons each, with 430 mm disc brakes - Air suspension with manual raise/lower valve - Support legs with universal foot (flat plate + half-wheel) - EBS WABCO braking system 2S/2C - A.D.R. electrical system - Pneumatic parking brake - Wheel chocks and brackets - Side underrun protection - 6 PVC mudguards - 2 PVC toolboxes Internal dimensions: Length: 13,542 mm – Front height: 2,660 mm – Rear height: 2,814 mm – Width: 2,475 mm – Volume: 92 m³ External dimensions: Length: 13,665 mm – Width: 2,542 mm – Height above ground: 4,000 mm – Fifth-wheel height: 1,150 mm – Gross weight: 39,000 kg Moving Floor: CF500 Cargo Floor (moving floor) with 21 aluminum planks, 10 mm thick, standard type (smooth, longitudinal ribbing) - Rear floor end (300 mm) in stainless steel, approx. 4 mm thick - Remote control in a waterproof control box - Max. pressure valve (225 bar) and high-pressure oil filter - Board movement: 200 mm per cycle Subframe: - Entirely made of extruded aluminum profiles (crossbeams) - Moving floor is longitudinally supported by aluminum tubes - Corrosion protection by polypropylene sheets applied between aluminum and steel Front wall: - Made from 600/30/3/2 mm aluminum profiles with reinforced top profile - Front catwalk with 2 ladders for side curtain operation - Connector strip (with sockets) for braking/electric/hydraulic systems - Upper square reinforcement plates between front wall and side wall Mobile partition wall: - Made from aluminum profiles and curtain bead at the floor, with reinforced strips for attaching curtains - Sliding partition, suspended from trolleys with slide bearings on two rails Side wall: - Made from 600/30/3/2.5 mm aluminum profiles, welded along the contour inside and outside - Upper continuous profile with a rail for the mobile partition Rear frame: Hodpfx Ajypa Dyjlxep - Made from aluminum profiles, with 2 doors (600/30/3/2.5 mm aluminum profile), 50 mm all-round door profile, double sealing - 4 aluminum hinges with galvanized pins (vertical), upright with handle - Fully screwed stainless steel lock with vertical tubular bar on each door - Rotatable upper rear cross member (one-piece) - Pneumatic safety device for door unlocking Roof: - 4 removable crossbars - Curtain fastening straps vertical, with 4 side tensioning straps - 2 tension belts across the full length - Curtain 900 g/m² - Right side curtain fixed by rivets along the surrounding profile Chassis color: SILVER GREY by MENCI Body color: MENCI SILVER GREY Curtain color: RAL 9006 Standard accessories: - 4 safety hooks for the curtain - Holder for shovel, broom, and rake - Manometer for weight monitoring (63 mm diameter) in moving floor control box - Compressed air gun connection on the left rear side - Prepared for rear floor tarp roller - Rear foldable protection for taillights Additional special equipment: - 6 SPEEDLINE LIGHT-ALLOY RIMS 385/65 R 22.5, OFFSET 120 - RADIO REMOTE CONTROL All details subject to change without notice!

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 31 m³, Oprema: ABS, Menci Grapar TSA 105 PED NEW | 31,000 l | 3 Compartments | Pressure Tank | ATP | from €89,000 New vehicle – individually configurable for your specific application. PED-certified stainless steel pressure tank for the professional transport of sensitive liquid products. Designed to meet the highest safety, hygiene, and quality requirements. ----Highlights • PED pressure tank compliant with EU 2014/68 • Total capacity: 31,000 liters • Three compartments for flexible product separation • Tank made of AISI 304 L stainless steel, polished interior • ATP insulated – suitable for temperature-sensitive products • CIP cleaning system combined with compressed air system • High-quality SAF chassis with lift axle ----Technical Specifications (Excerpt) • Total tank volume: 31,000 liters • Compartment split: 12,500 l / 6,000 l / 12,500 l • Operating pressure: 2.0 bar • Design pressure: 2.2 bar • Test pressure: 3.5 bar • Compartments: 3, with DN 100 conical outlet valves • Certification: PED EU/2014/68 (with simultaneous pressurization of all compartments) • Axles: SAF INTRADISC PLUS, disc brakes Ø 430 mm • Lift axle: 1st axle, fully automatic, load-dependent ----Standard Equipment (Excerpt) • Grapar tank brand, AISI 304 L stainless steel • Interior polish in accordance with Code 1 – food-grade standard • DN 500 pressure manhole cover with safety valves • Stainless steel toolboxes with insulated doors and drain • CIP cleaning system with 5 removable spray heads • Compressed air system with air reservoir and process filter housing • Walkway on the left made of anodized aluminum with folding stainless steel handrail • Folding stainless steel access ladder • Gravity discharge via insulated outlets ----Chassis & Safety • Frame made of fine-grained steel, fully hot-dip galvanized • SAF 3-axle assembly, disc brakes • WABCO EBS brake system (2S/2M) incl. stability program • Automatic lift axle control with starting aid • Air suspension with automatic level control • Spray protection system in accordance with EU 109/2011 • Underrun protection compliant with ECE-R58R03 • ASPÖCK LED lighting system ----Included Options / Features • SPEEDLINE aluminum wheels 22.5" Hedeypa Hhopfx Alxep • Premium tires 385/65 R22.5 • Stainless steel toolbox and sterile box • Spare wheel carrier incl. mounting kit • Stainless steel manifold and reducers • Additional cleaning and ventilation connections • Chassis paint MB 7350 Nova Grey • Complete ECE signage & reflective markings Other equipment and individual customizations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 35.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Kässbohrer Tank Container Chassis NEW | 20 ft | also available as 30 ft version | from €23,500 New vehicle – individually configurable for your application. High-quality tank container chassis ensuring safe transport of 20-ft tank containers. Also available as a 30-ft version – customized configuration based on customer requirements. ----Highlights * Suitable for 1 × 20 ft tank container * Also available as 30-ft tank container chassis * Very low tare weight (approx. 3,200 kg) * Robust, durable chassis with 10-year corrosion protection * Proven Kässbohrer quality for hazardous goods and tank logistics ----Technical Specifications * Gross vehicle weight: 39,000 kg * Axle load: 27,000 kg * King pin load: 12,000 kg * Fifth wheel height: 1,150 mm * Overall length: 8,160 mm * Overall width: 2,550 mm * Unladen weight: approx. 3,200 kg * Axle spacing: * 1st–2nd axle: 1,310 mm * 2nd–3rd axle: 1,410 mm ----Standard Equipment * High-strength steel construction made from S700 MC Hjdpfx Aloypa Nvexep * KTL-coated chassis with 10 years corrosion protection * Container locks (JOST) for: * 1 × 20 ft tank container * Swap tanks (7,150 / 7,450 / 7,820 mm) * BPW axles, air suspension, disc brakes (3 × 9 t) * WABCO EBS brake system (2S/2M) incl. ABS & RSS * LED lighting system according to UN ECE R48 * Side underrun protection according to ECE R73 * Fixed underrun protection according to ECE R58.3 * Mechanical JOST landing gear (24 t) ----Included Options / Equipment * TPMS tire pressure monitoring system (WABCO OptiTire) * Aluminium rims (Kässbohrer selection) * ADR preparation (ADR compliant, T9 document provided by customer) * Hose carrier with stainless steel cover * Side and rear markings according to EU regulations * Fire extinguisher box * Axle load indicator manometer * Mudguards & spray protection according to EU standards ----Suitable for Tank Container Transport * Chemical & hazardous goods logistics * Liquid goods in ISO tank containers * National & international transports * Forwarders operating 20-ft and 30-ft tank containers ----Additional equipment and individual customization available at any time – we will configure your vehicle precisely according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 50 m³, Oprema: ABS, Kässbohrer Tipping Silo Semi-Trailer NEW | 40–60 m³ | Aluminium | Food-Grade | from €65,900 New vehicle – individually configurable to suit your application. Silo semi-trailer for bulk goods – available for either industrial or food applications. Several volume options available (40 / 45 / 50 / 60 m³) – we will advise you based on your specific requirements. --- Highlights - Aluminium tipping silo, robust lightweight construction - Volume options: 40 / 45 / 50 / 60 m³ - Food-grade design optionally available (e.g. for flour, animal feed) - Tiltable tank with DN700 discharge cone - Internally ground weld seams - BPW axles with air suspension & disc brakes - WABCO / KNORR EBS braking system - Non-slip catwalk with folding safety rail - High-quality corrosion protection & long-lasting paint finish --- Technical Data - Gross weight: 39,000 kg - Unladen weight: approx. 5,200 kg (±3%) - Axle load: 27,000 kg - Fifth wheel load: 12,000 kg - Tank diameter: approx. 2,530 mm - Vehicle height: approx. 4,000 mm - Saddle height: approx. 1,220 mm - Operating temperature: –20 °C to +80 °C - Operating pressure: 2.0 bar --- Standard Equipment Hodpfxoypa Raj Alxop - Aluminium tank with ground internal welds - 3 manholes DN450 - DN700 stainless steel discharge cone with fluidisation - Stainless steel mixing manifold with brass valves - Upper & side air pipes made from aluminium - Non-slip aluminium catwalk with folding fall protection - Aluminium access ladder in compliance with UVV regulations - BPW axles with air suspension & disc brakes - Lift axle (EBS-controlled) - Electronic air suspension (ECAS) - LED lighting (Aspöck) - JOST landing legs - Side and underrun protection in accordance with ECE --- Included Options / Special Equipment - Food-grade version available - Vacuum & non-return valves made of brass - Hose carriers on both sides (DN200) - Hydraulic tipping system (oil supply via tractor unit) - Load monitoring pressure gauge - Toolbox - Aluminium underrun protection (tiltable) - Side protection in aluminium - Reflective stripes as per ECE - Wheel nut covers with “K” logo --- Further equipment and customised solutions available at any time – we configure your vehicle exactly to your specifications. Sample photo. Actual equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 37.700 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Kässbohrer Container Chassis NEW | Extendable | 20–45 ft | 3 Axles | from €29,800 Hedpfx Alsypa N Nexsp New vehicle – individually configurable for your application. Flexible container chassis for professional transport of 20 ft to 45 ft containers. --- Key Features --- • Extendable chassis at front/middle/rear • Suitable for 20, 30, 40 & 45 ft containers • Also suitable for tank containers and high-cube containers • High operational flexibility for freight forwarding and intermodal transport • Lightweight design with robust construction • Container locks are stable and designed for real-world use • Maintenance-friendly structure for daily operations --- Chassis & Safety --- • 3-axle design • Branded axles (BPW / SAF – depending on configuration) • Air suspension with lifting and lowering function • WABCO EBS braking system • TPMS tire pressure monitoring system • LED lighting according to EU regulations Further equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Actual equipment may vary depending on configuration.

Stanje: rabljeno, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1998, skupna širina: 2.550 mm, Oprema: ABS, Št. identifikacije vozila: WG0STZL47W0022918 Lastna teža: 15.900 kg Nemški tehnični pregled (HU) zapade Labodni vrat: 3.500 mm Nizkoposteljni del: Dolžina: 8.400 mm (vklj. z izvlečno ploščo - 300 mm) -- Širina: 2.550 mm -- Nakladalna višina: 850 - 900 mm TELESKOPSKO PODALJŠLJIV za 10.900 mm RAZŠIRLJIV na 3.000 mm - z razširitveno osvetlitvijo deljene rampe, hidravlično nastavljive po višini, dolžine 2.500 + 1.200 mm - širina 700 mm zapiralo za zabojnike Hsdpfjzfuhqox Alxep centralno mazalni sistem maks. obremenitev na sedlu spredaj: 18.000 kg Višina priklopa: pribl. 1.250 - 1.300 mm - kraljevski zatič 2" Tehnična nosilnost osi: 4 x 10.000 kg BPW Eco osi z bobnastimi zavorami 4 x hidravlično prisilno vodene osi Pnevmatike: 235/75 R 17,5 Spremembe, vmesna prodaja in napake so izrecno pridržane. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu prodajnega prava. Odločilen je opis iz kupoprodajne pogodbe. Naša ponudba je načeloma brez novega tehničnega pregleda (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo izmed naših partnerskih delavnic! Vozilo je lahko polepljeno ali napisano z oglasnimi nalepkami. Veljajo naši splošni pogoji dobave in plačila.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2018, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1.650 mm, prostornina tovornega prostora: 28 m³, skupna širina: 2.550 mm, skupna višina: 3.250 mm, Oprema: ABS, Identifikacijska številka vozila: VAVKSK339JZ408900 Nemški tehnični pregled (HU) zapade Lastna teža: 6.160 kg Dimenzije zabojnika: 7.600 x 2.330 x 1.650 mm Prostornina: cca 28 m³ SAF osi z bobničenimi zavorami Dvigljiva os Zložljive podporne noge Zunanji nihajni zadnji pokrov Nastavljiva zaščita podvozja Hsdpfszfufijx Alxjp Pnevmatike: 385/65 R 22,5 Spremembe, vmesna prodaja in napake so izrecno pridržane. Opis služi splošni identifikaciji vozila in ne predstavlja jamstva v pravnem smislu prodajne pogodbe. Odločilni je opis v skladu s kupoprodajno pogodbo. Naša ponudba je načeloma brez novega pregleda TÜV. Če želite nov TÜV pregled, vam lahko pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno ali označeno z oglaševanjem. Uporabljajo se naši splošni pogoji dobave in plačila.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2015, Leto izdelave: 2015,

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 11/2026, Oprema: ABS, Schmitz Container Chassis 1x20 / 2x20 / 1x30 / 1x40, Lift Axle, SAF At a Glance · First Registration: 11/11/2004 · Colour: Black · Unladen Weight: 5,445 kg · Tyres: 385/65 R22.5 · Note: Immediately available! Special Equipment Container chassis suitable for: 1x20 / 2x20 / 1x30 / 1x40, pneumatic rear extension, rear height adjustment and folding centre supports for containers without tunnel, front container guides, underrun protection, lift axle, EBS, ABS, 2x 7-pin + 1x 15-pin electrical connections, 2 wheel chocks, TÜV valid until 11/2026. Standard Features 3-axle configuration, 430mm disc brakes, lift and lower valve. Errors, typographical mistakes, and prior sale reserved. The seller reserves the right to withdraw the vehicle from sale. _____ Internal reference number: TR26155 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales Contacts: Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Hjdpfxey R Iq Sj Alxop Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. Yours included! Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks, and vans. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Stanje: rabljeno, skupna masa: 32.500 kg, konfiguracija osi: 2 osi, prva registracija: 06/2023, Oprema: ABS, Schmitz Cargobull SKI 18 SL-7.2 SR 28m3, električna cerada, jekleni okrogli kiper !! Nesreča !! * Nemško vozilo * 28 m3 * električna cerada * kolutne zavore * dvigljiva os * zračno vzmetenje * zračno upravljanje * samodejno spuščanje pri preklopu * vzvratna kamera * zložljiva zaščita proti podletu * SCB osi * multifunkcijska omarica za električni priključek * ISO zračni priključki z rdečo in rumeno spojko * ABS priključek Polpriklopnik je bil udeležen v nesreči! Hodpfx Ajzh Dhljlxjp Vmesna prodaja in napake so izrecno pridržane! Prodaja izključno v skladu z našimi splošnimi pogoji poslovanja. Pomembno obvestilo: Kljub skrbnemu preverjanju vseh podrobnosti v naši ponudbi lahko pride do napak, deloma tudi zaradi prenosnih napak v sistemih različnih platform. Zato poudarjamo, da so vse navedbe brez jamstva in ne predstavljajo pravnega zahtevka. Pravno: Ta prodajni oglas ne predstavlja ponudbe v smislu §145 BGB. Gre izključno za informacijo za namen pogajanj o sklenitvi pogodbe. Vse navedbe so brez jamstva in ne predstavljajo zagotovljenih lastnosti.

Stanje: novo, konfiguracija osi: 3 osi, Oprema: ABS, Fliegl kontejnersko podvozje ADR, 1x20/2x20/1x30/1x40/1x45 Highcube Gooseneck, popolnoma pocinkano ogrodje, BPW ? osi, dvižna os Vse na enem mestu · Prva registracija: novo vozilo · Letnik: 2026 · Barva: srebrna (popolnoma pocinkano) · Lastna teža: 4.940 kg · Pnevmatike: 385/55 R 22,5 · Opomba: Večkrat takoj na voljo Posebna oprema Kontejnersko podvozje Gooseneck za: 1x20 / 2x20 / 1x30 / 1x40 / 1x45 / Highcube kontejner, ADR: EX1, EX2 in EX3, sprednji ? in zadnji izvlek, POPOLNOMA POCINKANO, nastavitev višine zadaj in zložljive sredinske podpore za kontejnerje brez tunela, snemljivi in premični sprednji vodniki za kontejner, vtični adapter za sprednje zaklepanje, izvlečna zaščita proti podvozu za 25 čevljev kontejner, BPW ? osi, dvižna os (vključno s prisilnim spuščanjem in pomočjo pri speljevanju, upravljanje 3x zavore), EBS, ABS, zaznavanje osne obremenitve, LED zadnje in zavorne luči, 2x7 + 1x15-polni električni priključki, označevanje obrisa, 2 kosa podložne zagozde, aluminijasta bočna zaščita, nosilec rezervnega kolesa, orodjarna, škatla za dokumente. Serijska oprema 3-osno, kolutne zavore 430 mm, dvigovalni in spustni ventil Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje. Prodajalec si pridržuje pravico do odstopa od prodaje. _____ Interna številka za povpraševanje: TR26186 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Kontaktne osebe prodaja / contact: G. Ing. Wimmer Christoph (nemško, angleško, češko, poljsko, italijansko) t: tudi WhatsApp @: G. Mehmet Terzi (nemško, turško, angleško, rusko, ukrajinsko, bosansko, srbsko) t: -104 / tudi WhatsApp @: G. Elias Höfler (nemško, angleško, bolgarsko, bosansko, srbsko) t: -123 / tudi WhatsApp @: Govorimo 13 jezikov. Zagotovo tudi vašega. Kontaktirajte nas! Domača stran: Facebook: Instagram: Starent Truck & Trailer GmbH odkupuje vaša gospodarska vozila kot so vlačilci, prikolice, tovornjaki in dostavniki. Michael Doblhofer (nemško, angleško) t: -102 tudi WhatsApp @: Bastian Wagner (nemško, angleško) Hedpezc Dq Rsfx Alxop t: -103 WhatsApp @:

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, Fliegl kontejnersko podvozje ADR, 1x20/2x20/1x30/1x40/1x45 Highcube Gooseneck, popolnoma pocinkan okvir, BPW ? osi, dvižna os Vse na enem mestu · Prva registracija: novo vozilo · Leto izdelave: 2026 · Barva: srebrna (popolnoma pocinkana) · Lastna masa: 4.940 kg · Pnevmatike: 385/55 R 22,5 · Opomba: na voljo več enot takoj Posebna oprema Gooseneck kontejnersko podvozje za: 1x20 / 2x20 / 1x30 / 1x40 / 1x45 / Highcube kontejnerje, ADR: EX1, EX2 in EX3, izvlečna sprednja in zadnja stran, POPOLNOMA POCINKANO, nastavljiva višina zadaj in zložljive sredinske podpore za kontejnerje brez tunela, sprednji vodilci kontejnerja vstavljivi in snemljivi, vtični adapter za sprednje zaklepanje, izvlečna zaščita proti podvozu za 25 čevljev kontejner, BPW ? osi, dvižna os (vključno s prisilnim spuščanjem in pomočjo pri speljevanju, upravljanje preko 3 x zavor), EBS, ABS, zaznavanje obremenitve osi, LED vzvratna in zavorna luč, 2x7 + 1x15-polni električni priključki, obrisna označba, 2x podložni zagozdi, aluminijasta bočna zaščita, nosilec rezervnega kolesa, orodjarna, škatla za dokumente, navedena cena velja za posamezno vozilo – možen nakup posameznih enot. Serijska oprema 3-osnik, kolutne zavore 430 mm, ventil za dvig in spust Pridržujemo si pravico do napak, pisnih napak in vmesne prodaje. Prodajalec si pridržuje pravico do odstopa od prodaje. _____ Interna številka za povpraševanja: TR26187 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Kontaktne osebe prodaje: G. Ing. Wimmer Christoph (nemščina, angleščina, češčina, poljščina, italijanščina) tel: tudi WhatsApp G. Mehmet Terzi (nemščina, turščina, angleščina, ruščina, ukrajinščina, bosanščina, srbščina) tel: / tudi WhatsApp G. Elias Höfler (nemščina, angleščina, bolgarščina, bosanščina, srbščina) tel: / tudi WhatsApp Govorimo 13 jezikov, zagotovo tudi vašega. Kontaktirajte nas! Spletna stran: Facebook: Instagram: Starent Truck & Trailer GmbH odkupuje vaša gospodarska vozila, kot so vlačilci, prikolice, tovornjaki in dostavniki. Michael Doblhofer (nemščina, angleščina) tel: tudi WhatsApp Hsdpfx Aljzc Dq Doxop Bastian Wagner (nemščina, angleščina) tel: WhatsApp

Stanje: rabljeno, lastna masa: 6.440 kg, največja dovoljena obremenitev: 27.560 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 57 m³, vzmetenje: zrak, barva: srebrn, Leto izdelave: 2025, prevoženi kilometri: 153.649 km, vrsta prenosa: mehanski, Oprema: ABS, Lastna teža: 6440 kg, dovoljena skupna masa: 34000 kg, tovorni prostor (D Š V): 10.500 mm x 2.470 mm x 2.200 mm, volumen tovornega prostora: 57 m³, zračno vzmetenje, dvižna os: 3. os prisilno vodena, elektronski zavorni sistem EBS, dirigirana sledilna os, nihajna loputa, mulda odporna na blato, strešna ponjava z navijanjem, podest, anti-spray zaščita, lahka aluminijasta platišča: ALCOA, prikazovalnik osne obremenitve, sistem za cerado, Trailer Info modul, SAF osi, pnevmatike 385/65R22,5, izvedba za palete, L10500 Š2470 V2200 57m3, žitni drsnik, višina sedla 1200, VAVKSK339PH518676, prodaja v komisiji, nezavezujoča ponudba, pridržujemo si pravico do napak in vmesne prodaje. Slika ni nujno skladna s ponudbo. Hsdpozcrukofx Alxop

Stanje: rabljeno, največja dovoljena obremenitev: 28.900 kg, skupna masa: 35.000 kg, prva registracija: 03/2020, vzmetenje: zrak, medosna razdalja: 1 mm, barva: siv, vrsta prenosa: drugo, voznikova kabina: drugo, Ta ponudba ni zavezujoča. Pridržujemo si pravico do napak in vmesne prodaje. V primeru navedbe tuje valute velja tekoči dnevni tečaj. Veljavna je valuta lokacije vozila. Hodpfxoyig Icj Alxjp

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2026, Tipping Cylinder: Hyva, tipping cylinder barrel chrome-plated - Stroke 7100 mm - Tipping warning signal. Connection: 1" hydraulic connection with thread and hydraulic hose: 2.2 m long with 1" (inch) threaded coupling - female! Cranked aluminium chassis, aluminium body with tunnel, steel support legs, SAF offroad axles, 1st axle lift axle, 6x tyres 385/65 R22.5 Bridgestone RT, 1 towing coupling, round LED rear lights, 2+1, quick-release tarpaulin fastener. Toolbox, detachable step ladder, 2 external shovel holders, 25L water tank, ASW in the front loading area, pneumatic vibrator at the front of the floor with control valve on the left side, grain bunker with brackets at each grain chute. Aluminium body, smooth side walls - double-walled longitudinal hollow chamber profiles - vertical wall thickness gradient (3 mm at half height) - internal length 9.50 m - internal usable height 2200 mm - inward-sloping top chord profiles, floor with tunnel - floor thickness 5 mm, internal usable width 2410 mm, floor reinforcement struts - doubling of the top chord profiles - front wall 14° sloped, thickness 4 mm - conical recess reducing inside space to 450 mm. Universal tailgate - double bar locks - foldable upper traverse - 2 door leaves - 1 grain chute with protective cover in each leaf - rubber seals on the door leaves and rigid frame, door leaves with smooth panels, continuous inner welding seams. Roll tarp system - white transparent stripe - side tension straps - round aluminium roof bows (100 mm spacing) - rounded top section, pivoting, adjustable, removable, foldable to the side - aluminium forged MULTIFUNCTION tarp stops (straight - cranked - foldable), tarp pole yes, half-locking bar - tailgate locking: pneumatic automatic release of the pendulum frame with 4 hooks, upper tailgate hinge pendulum flap, upper aluminium double hinge - removable. Integrated in side wall height. Grain chutes right & left (aluminium). Hsdport N Sfefx Alxop