Möslein Tt21-6,5 Hydr 21 T Tandemtieflader, Hydr. Rampen, Neu nakup rabljenega (59.515)

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) Nwodpox Ipbgjfx Ab Hoh * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders Nwsdox Ipb Hopfx Ab Hoh * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: rabljeno, največja dovoljena obremenitev: 23.900 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2007, Leto izdelave: 2007, Interna številka vozila: G400178 Na voljo takoj na naši lokaciji v Kaufungenu Več informacij: * Golec Nutzfahrzeuge GmbH (nemško, angleško, bolgarsko, rusko) Nwjdpfx Aszahg Deb Hjh * Viktoria Sologubova (poljsko, rusko, ukrajinsko, angleško) Lastna teža: 7.100 kg Skupna dolžina: 10.800 mm Največja dovoljena masa: 31.000 kg Možne so napake pri vnosu podatkov Z veseljem vzamemo vaše rabljeno vozilo v račun. Financiranje možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govori se: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, največja dovoljena obremenitev: 30.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2015, dolžina tovornega prostora: 10.170 mm, širina tovornega prostora: 2.500 mm, skupna širina: 2.520 mm, skupna višina: 3.600 mm, Oprema: ABS, Vroče pocinkano, dolžina nizkega ležišča cca 6520 mm, razširljivo na 3000 mm, višina nakladanja: cca 910 mm, zadnji naklon: 850 mm, visoko ležišče 2800 mm, vlečno oko 50 mm, vdolbina za roko bagra, hidravlične nakladalne rampe stransko pomične (D x Š) mm, 9 x vponk na vsaki strani, 12 x pritrdilnih obročev na vsaki strani, 2 x zložljivi oporni nogi zadaj, spojna glava Duo-Matic, rotacijska opozorilna luč, izvlečne opozorilne table, ABS, EBS, SAF os(i), bobnaste zavore, listnato vzmetenje, vozilo je lahko opremljeno z reklamnimi nalepkami in/ali napisano. SI86936 Nedpfxjy Trwze Ab Howh Naša ponudba je načeloma brez nove tehnične preglede (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko opremljeno z reklamnimi nalepkami in/ali napisano. Veljajo naši splošni dobavni in plačilni pogoji. Z veseljem vam pripravimo ponudbo za financiranje ali leasing tega objekta. Prosimo, kontaktirajte nas!

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Nedsrducpspfx Ab Hswh Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: rabljeno, največja dovoljena obremenitev: 27.300 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2013, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 11.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, * Gugalnica z zaboji za shranjevanje * Sledilne krmiljene osi * Hidravlične nakladalne rampe * Razširljiva nizkopodna ploščad ----* Dimenzija pnevmatik: 235/75R17,5 * Tehnična skupna masa: 42.000 kg * Lastna teža: 8.700 kg * Skupna dolžina: 13.150 mm * SP veljavnost do: 02/2027 ----Številka vozila: 12148 ----Možne napake in vmesna prodaja pridržane ----Oglasi in različni napisi so bili digitalno odstranjeni. -----Z veseljem vam pomagamo pri vseh formalnostih, ki nastanejo ob nakupu vozila – sporočite nam vaše želje in predloge ter za vse ostalo bomo poskrbeli mi. Med drugim vam lahko za doplačilo ponudimo naslednje storitve: ----Odkup vašega starega vozila TÜV/SP tehnični pregled Popolna izvozna obdelava Posredovanje financiranja Urejanje izvoznih tablic Nsdpfxjza Rlie Ab Hjwh Prevoz vozil Registracija vozil Reševanje in transport vozil ----VAŠ VTS TEAM

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, PT 30 Profile: ----Braking System: * EBS (electronic braking system) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and height adjustment via traction spring & turnbuckle ----Electrical / Lighting: * Smart-Board information system mounted on the trailer (for axle load indication – separate front and rear display) Nwedpfx Asxptn Reb Heh * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud skirts with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in the bogie for accessories, with folding lid and 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low Loader Platform: * Robot-welded non-slip overlay on the steel plate of the bogie platform (protruding weld seams) ----Load Securing (La-Si package consisting of): * 2 lashing eyes (13.4 t) front left & right on front bulkhead carrier * 1 pair of UVV lashing rings at front & rear (13.4 t) and 3 pairs of UVV lashing rings on each side (10 t), pivotable and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets on each side, each with 2 t lashing capacity * Profifix lashing rail in longitudinal axis, centered in flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear taper) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way control block for future retrofit of hydraulic ramp lateral adjustment ----Excavator Arm Rest: * Excavator arm rest above rear axle, extending to the rear end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, located laterally in the main longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm (air suspension) ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports and ramps hot-dip galvanized * Axles, slewing ring, air tanks, and drawbar painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalization unit with 100 mm wide parabolic springs Nwodjr Dpzujpfx Ab Heh ----Drawbar / Drawtube: * Fixed welded drawtube with low-maintenance ball joint for K80 ball coupling (offset by +77 mm / 33 mm via head plate), with raised bracket for connection lines ----Electrics / Lighting: * 12 V, 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from towing vehicle without installation on towing side ----General attachments: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Hot-dip galvanized two-step access ladder in front of the front wall (on FR left) ----Chassis: * Fine-grain steel chassis ----Tipper body: * Steel Pal.- 3-way tipper body with M-Strong side panels (front wall fixed, continuous side panels - without center stanchions - swinging via manual central locking and mechanically foldable with sideboard spring assistor) * Hydraulic tailgate, 500 mm high, functioning as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7-tonne recessed and foldable lashing point in each corner * 4 x 3-tonne recessed and foldable lashing rings on each side ----Ramps: * 1 pair of aluminum drive-on ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receiving compartments for aluminum drive-on ramps, recessed from behind into the chassis * Load securing according to EN 12642 XL ----Coupling height: * Laden approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawtube, rear supports, underrun protection hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black shade ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Braking System: * Without ABS/EBS, homologated for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem-balance unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: * Rigid, welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via mounting plate) with elevated gallows for connection lines ----Electrics / Lighting: * 12 V 7 + 4-pin power supply cable * LED lighting system, 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical drop legs at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Hot-dip galvanized two-step access steps in front of the bulkhead on the left (FR) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Steel pallet three-way tipper body with M-Strong side boards (fixed front wall, continuous sides without central stanchions, swinging via manual central locking, plus mechanically folding with board spring lifters) * Hydraulic tailgate, 500 mm high, engineered as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t recessed folding lashing ring Nwedpor Dpz Hjfx Ab Heh * Each side fitted with 4 x 3 t recessed folding lashing points ----Ramps: * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber and tracked vehicles * 2 recessed storage compartments for aluminum ramps in the rear of the chassis * Load securing compliant with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs, underrun protection hot-dip galvanized * Axles, air tanks, landing gear (front) * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 37.530 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 11/2026, skupna širina: 3.000 mm, skupna višina: 3.780 mm, Oprema: ABS, * Gooseneck with foldable side walls * Low bed length: 11,950 mm - 15,450 mm * Low bed extendable in steps by 3,500 mm * Low bed width extendable by 460 mm * Hydraulically adjustable loading ramps (split, 2 parts) * Stake pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd + 4th axle with steering function * Wheel chocks ----* Tire size: 235/75R17.5 * Technical gross weight: 58,000 kg * Unladen weight: 12,470 kg * Overall length: 13,700–17,200 mm * Overall width: 2,540–3,000 mm * Safety inspection due: 05/2026 ----Vehicle number: 12062----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions—we will take care of everything. Among other services, we can offer you the following for an additional fee:----* Trade-in of your old vehicle Nsdsy T Dyzopfx Ab Howh * HU/Safety inspection * Complete export processing * Financing brokerage * Application for export license plates * Vehicle transfers * Vehicle registration * Recovery and vehicle transport ----?YOUR VTS TEAM

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 13.000 kg, dovoljena osna obremenitev (os 2): 13.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, prva registracija: 07/1983, dolžina tovornega prostora: 11.870 mm, širina tovornega prostora: 2.500 mm, vzmetenje: parabolično listje (vzmet), barva: bela, Leto izdelave: 1983, Polpriklopnik CTC ZA90SRT47 Nizkopodni 11,87 m s hidravličnimi rampami in vitlom (4,10 m + 7,35 m) 3 osi Parabolično vzmetenje Dovoljena skupna masa 47.000 kg – nosilnost 39.000 kg Za specialne prevoze, dovoljena skupna masa kompozicije 56.000 kg Neto izvozna cena: 18.000,00 EUR Nedpfjy Axufox Ab Hswh Vse informacije brez garancije/ možnost napake pridržana.

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Warning sign packages, front and rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V 15-pin as well as additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on right side * Enclosed single plastic mudguards at the front * Straight steel mud flaps at the rear each with splash protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm forward * Kingpin platform extension by 520 mm with 45° angled corners and 3 recessed lockable storage compartments with lid * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm and in low-bed platform made of 60 mm softwood * Outer boards of the drive-on ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included) with integrated 2 t lashing point * Load securing package (Lasi package) including: 2 lashing eyes (6.4 t) front left/right on the main frame of the turntable platform; on both sides, front and rear, 1 pair of 13.4 t lashing rings on the outer frame, 4 pairs per side of 10 t swivel and drop lashing rings, loadable in all directions and integrated into the outer frame; 2 pairs of 6.4 t lashing rings per side in the excavator stick tray; 8 pairs of galvanized folding extensions for total width of 3 m (not at the rear angled section) * Side extension planks stored on the left in a compartment Nwodpfx Abjl Th Evj Heh * Excavator stick rest above rear axle up to the end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic, hot-dip galvanized drive-on ramps approx. 3,000 x 720 mm * Hydraulic side ramp shifting on sliding tube from ramp axle * Loading area above kingpin: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, kingpin platform, drive-on ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and kingpin painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 14.380 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/1998, Oprema: ABS, TRAX prikolica za odlagalne zabojnike Nagibna!!! Nov tehnični pregled!!! Pnevmatike 265/70R19,5 Hidravlična zapora Nsdoy T S Ugspfx Ab Hewh Francoska registracija Zelo dobro stanje

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal T4 Low Loader Trailer * SAF axles with drum brakes * Twin tyres * Low bed with extendable loading platform * Hydraulic loading ramps, movable (2 units) * Drive-over gooseneck * Additional rear supports * Turntable construction ----Dimensions & loading area * Loading area approx. 9,800 mm * Loading width: 2,550 - 3,000 mm * Loading height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892----Subject to errors and prior sale----Advertising and various lettering have been digitally removed. -----We are happy to assist you with any formalities arising from the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other things, we can offer you the following services at an additional cost: ----Trade-in of your old vehicle TÜV/general inspection Complete export processing Financing brokerage Obtaining export license plates Vehicle transport Vehicle registration Recovery and vehicle transport Nwjdoy Skl Iopfx Ab Hoh ----Your VTS Team

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Nedpel Sl Izofx Ab Hewh Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer Nodpfx Abehlz S Ns Hjwh • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Nwodpfx Aomfqi Isb Hjh Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik * Prva registracija: 11/2004 * 3 osi Nwedpfew Tgkbsx Ab Heh * Zračno vzmetenje * Gigant osi * Hidravlične dolge rampe, pomične in zložljive * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 * Tehnični pregled do: 02/2026

Stanje: novo, lastna masa: 500 kg, največja dovoljena obremenitev: 1.300 kg, skupna masa: 1.800 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 1.580 mm, višina nakladalnega prostora: 1.900 mm, vzmetenje: drugo, velikost pnevmatike: 185 r14 c, Box Trailer Major X-pert Edition Outstanding box trailer with an attractive design. 315x158x 1800 kg, single axle 100 km/h Ramp + side door Low fuel consumption, comfortable driving, sandwich panel construction Equipped with special rails for attaching lashing rings anywhere, allowing cargo to be secured at any position. If you have any questions, please send us a message or call us! Nsdpfx Aboqwkt Ro Hswh Technical modifications, price changes, errors, and prior sale reserved. We accept no liability for errors or typographical mistakes.

Stanje: novo, lastna masa: 390 kg, največja dovoljena obremenitev: 1.382 kg, skupna masa: 1.800 kg, velikost pnevmatike: 195/50r13, NEW with us + at a SPECIAL PRICE: Immediately available Here you'll find the ideal car trailer for your needs! Perfectly suited for transporting smaller vehicles such as Smart cars, ride-on mowers, motorcycles, machinery, and much more! The trailer offers a high payload capacity of approx. 1382 kg, with a permissible total weight of 1800 kg and an unladen weight of approx. 418 kg. Standard features include loading ramps and robust coupling eyes to ensure safe transport of your cargo. Make your transport tasks even easier. This trailer can be equipped with various accessories: - Higher side panels, 30 cm - Winch - 100 km/h road approval - Support legs Long axles positioned under the loading platform = reduced overall width + increased usable space Internal width! Tyres: 195/50R13 Nwedpfx Aboqwz U Hs Heh Automatic jockey wheel Foldable and removable aluminium sidewalls V-drawbar Very robust, recessed tie-down points in the platform Phenolic resin-coated anti-slip plywood floor 13-pin plug + safety lighting + reflectors If you have any questions, please send us a message or give us a call! Technical modifications, price changes, errors and prior sale reserved. No liability is accepted for mistakes or typographical errors.

Stanje: novo, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, vzmetenje: drugo, Durability is the new efficiency. *IMMEDIATE AVAILABILITY* High-loader 3116 GD 2000kg - Winch and ramps - 30 cm drop sides - 70 cm leaf mesh sides, swingable * Overrun brake with automatic reversing function Nwjdpfx Absqw Algs Hsh * Chassis, axles and V-drawbar galvanized * Rubber suspension axles * Lighting bar * Reinforced, folding, centrally positioned jockey wheel * 10 lashing rings * Net hooks * Support legs * Aluminum sidewalls * All 4 sides foldable and removable Technical specifications Axle(s): 2 Braked: Yes Unladen weight: 429kg Gross weight: 2000kg Load bed length: 311cm Load bed width: 160cm Loading height: 56cm Side wall height: 30cm Drive-on ramps: Yes Storage compartment for drive-on ramps: Yes If you are offered the same trailer at a lower price, please provide us with the offer! If you have any questions, send us a message or give us a call! Subject to technical modifications, price changes, errors and prior sale. No liability is accepted for errors or typographical mistakes.

Stanje: novo, lastna masa: 632 kg, največja dovoljena obremenitev: 2.068 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 1.000 mm, vzmetenje: drugo, velikost pnevmatike: 195/55r10   , Car Transport Trailer NEW Specifications: Internal dimensions, LxW (cm): 406x200 Overall dimensions, LxW (cm): 560x206 Railing height: 10 cm Loading height (cm): 56 Gross weight (kg): Nwjdsqwk Swepfx Ab Hsh Unladen weight: 632 kg Axles: 2 Braked Tyres: 195/55R10 Floor: Multiplex Loading system: Ramps Welded and hot-dip galvanized frame If you have any questions, please send us a message or give us a call! Technical modifications, changes in price, errors and prior sale reserved. No liability for errors or typographical mistakes.

Stanje: novo, lastna masa: 612 kg, največja dovoljena obremenitev: 2.080 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 100 mm, velikost pnevmatike: 195/55r    , !!!IMMEDIATELY Available!!! Robust car transporter trailer with excellent road handling Specifications: Internal dimensions, LxW (cm): 406x Overall dimensions, LxW (cm): 560x Railing: 10 cm high Loading height (cm): Gross weight (kg): Unladen weight: 632 kg Axles: 2 Braked Tyres: 195/55R Floor plate: Multiplex Loading system: Ramps Welded & galvanized frame Accessories available at extra cost 100 km/h preparation (4 shock absorbers installed) Nwjdpfx Aeqwz Risb Hsh If you have any questions, please send us a message or call us! Technical modifications, price changes, errors, and prior sale reserved. No liability is accepted for errors or typographical mistakes.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 25.562 km, moč: 353 kW (479,95 KM), prva registracija: 08/2021, vrsta goriva: dizel, konfiguracija osi: 8x4, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna dolžina: 9.090 mm, skupna širina: 2.540 mm, skupna višina: 3.610 mm, Leto izdelave: 2021, Oprema: AdBlue, = Additional Options and Accessories = - PTO (Power Take-Off) = Further Information = Technical Information Number of cylinders: 6 Engine capacity: 12,809 cc Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 17,150 kg Payload: 18,850 kg gross vehicle weight: 36,000 kg Functional Pump: Yes Condition Technical condition: very good Visual condition: very good MERCEDES AROCS 8X4 WITH MULTILIFT ULT T 21 S 51 ROLL-OFF TIPPER + HIAB X-HIPRO 232 E-6 CRANE EURO 6 L PACKAGE 480 HP DRIVE 8X4 AP AXLES AIR SUSPENSION WHEELBASE 515 CM MODEL AROCS CAB WITH AIR CONDITIONING AUTOMATIC TRANSMISSION WITH ENGINE BRAKE MULTILIFT 21 TON ROLL-OFF TIPPER TYPE: ULT T 21 S 51 ADJUSTABLE UNDERRIDE GUARD HYDRAULIC CONTAINER LOCKING HIAB X-HIPRO 232 E-6 CRANE 6X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5TH + 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 5,400 KG MAX WORKING HEIGHT 2,000 CM Njdpjyiuk Isfx Ab Howh MAX LIFTING CAPACITY AT 200 CM 870 KG 2X OUTRIGGERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Stanje: novo, lastna masa: 2.950 kg, največja dovoljena obremenitev: 7.050 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.080 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.520 mm, prostornina tovornega prostora: 44 m³, vzmetenje: zrak, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, BPW axles, front area accessible for through-loading with a short drive-over flap, 2 rows of combi load securing rails, 7 pairs of lashing rings in the floor, load securing according to EN 12642 Code XL, 1 interior light, side wall thickness approx. 17 mm, rental price starting at €650 per month, -- Printing errors, mistakes and changes reserved, sample photos --, More data at: !, More Details: ! Nwsdpszhf Uyofx Ab Hjh