Fliegl Zps180 2 Achs Jumbo-Plato- Anhänger nakup rabljenega (50.882)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21001013325, lastna masa: 2.500 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 11/2023, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 630 mm, skupna dolžina: 7.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: modra, The images shown are archive photos. The vehicle may still be in operation. Chassis – Central Axle Trailer, Low Loader Fine-grained steel welded construction Gear support foot in front Telescopic rear supports Wheel chocks with holder Mudguards made of sheet steel covering both wheels Side underrun protection made of aluminium Coupling device for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 250 mm Axles & Suspension Euro-axles of our choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" manufacturer's choice steel rims, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Please note: The trailer may only be towed by vehicles that ensure the ABS functionality! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at the front, with connecting cable, Bridge TTS Iodpfszadb Dox Aiketi Low-mounted steel trough, bridge floor covered with steel / chequer plate, steel walls solidly welded to the floor Bridge length: 5,500 mm Trough front and sides equipped with "Load-Lock profiles" for securing straps (8 units at the front, 16 units per side) Note: Slight floor waviness due to welding distortion possible! Pair of lashing rings, 1 x in the front corners of the steel trough and 1 x at the rear in the floor, each 5t Additional pair of lashing rings in the floor, each 5t Loading Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps wooden surface (tips with steel / chequer plate) gas pressure springs for one-man operation Operating Notes The total weight stated is technically possible; depending on the cargo, the total permitted weight may not be attainable while observing legally permissible axle, support, and kingpin loads (Incorrect weight distribution may cause poor driving and tracking behavior) Registration/Country Plates Registration country: Germany With Dekra inspection and certificate (as per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides, red at the rear Paintwork Frame: RAL 5002 ultramarine blue Loading ramps: hot-dip galvanized The images shown are archive photos. The vehicle may still be in operation.

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2018, Oprema: ABS, Visitez notre site internet, où vous trouverez l’intégralité de notre stock de véhicules avec de nombreuses autres photos et informations en plusieurs langues. SEL 8382 Fliegl ZPS180 Itedpfxex Tmzzo Aikei Matériaux de construction / Jantes aluminium / 40 mm Homologation allemande 1ère mise en circulation : 25.01.2018 PTAC technique (kg) : 18.000 PTAC autorisé (kg) : 18.000 Poids à vide (kg) : 3.450 N° de châssis : WFDFLT21801007501 Contrôle technique : 02.2026 / SP : 08.2026 PNEUMATIQUES ET ESSIEUX : Pneus : 385/65 R 22,5 Configuration des essieux : 2 essieux / SAF Suspension pneumatique Freins à disque Jantes aluminium CARROSSERIE Dimensions intérieures : Largeur (m) : 2,49 Longueur (m) : 6,90 Hauteur des ridelles (m) : 1,00 DOCUMENTS DU VÉHICULE : Schein Brief M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/Українська, Russian/Русский) Nous parlons : ALLEMAND, ANGLAIS, ITALIEN, ESPAGNOL, PORTUGAIS, UKRAINIEN, RUSSE, POLONAIS, BOSNIAQUE Bien que tous les efforts aient été faits pour garantir l’exactitude des informations, nous ne pouvons assumer aucune responsabilité pour d’éventuelles erreurs ou omissions. Nous invitons nos clients à consulter les photos disponibles. Les mesures indiquées sont des valeurs approximatives. Nos véhicules sont vendus dans l’état où ils se trouvent. Nous invitons les clients à visiter notre société afin de vérifier personnellement l’état du véhicule. Nous proposons également la possibilité d’un essai routier. Il est important de noter que les batteries livrées avec le véhicule sont celles actuellement installées. Si le client souhaite des batteries neuves, nous pouvons fournir des informations sur les prix.

Stanje: novo, največja dovoljena obremenitev: 595 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.050 mm, širina tovornega prostora: 1.310 mm, višina nakladalnega prostora: 70 mm, skupna širina: 1.757 mm, skupna višina: 862 mm, Leto izdelave: 2026, Humbaur HA 752113 KV * Single-axle * Car trailer * New vehicle * Drop-side extension * Weight: 155 kg * Gross weight: 750 kg * Payload: 595 kg * Internal dimensions: 2,050 mm x 1,310 mm x 700 mm * Overall dimensions: 2,982 mm x 1,757 mm x 862 mm * Loading height: 510 mm * Tyres: 13 inch Iedpfsvvgmwex Aiketi * V-tongue drawbar, hot-dip galvanized * 13-pin plug * 15 mm thick floor panel * Side panels made of anodized, double-walled aluminium profiles * Tailgate(s) with recessed locks * Lashing rings (4 units up to 2,050 mm / 6 units from 2,510 mm box length) integrated in the side panels, tensile force 400 kg per lashing ring, DEKRA tested * Humbaur multifunction lighting integrated in the underrun guard * Corner stanchions with plug-in option * 19% VAT ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We explicitly reserve the right to prior sale, as we also offer this item on other platforms. We strongly recommend an inspection and check, so that no misunderstandings arise regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly welcome!!! The stated internal dimensions are approximate values. For new vehicles, prices are plus freight costs and registration certificate fees. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART EXCHANGE AND UPGRADES POSSIBLE!!! Exhibition ground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, največja dovoljena obremenitev: 1.005 kg, skupna masa: 1.200 kg, konfiguracija osi: 1 os, prva registracija: 09/2002, naslednji pregled (TÜV): 05/2027, dolžina tovornega prostora: 2.500 mm, širina tovornega prostora: 1.200 mm, višina nakladalnega prostora: 1.800 mm, skupna širina: 1.760 mm, skupna višina: 2.310 mm, Leto izdelave: 2002, Humbaur HA 75/12 * Single-axle * Car trailer * Low-loader * Tarpaulin and frame LH 1800 mm * First registration: 23.09.2002 * Next inspection (TÜV): 05/2027 * Unladen weight: 195 kg * Gross weight: 1200 kg * Payload: 1005 kg * Internal dimensions: 2,500 mm x 1,200 mm x 1,800 mm * Overall dimensions: 3,205 mm x 1,760 mm x 2,310 mm * Floor plate 15 mm thick Iedpfxsx N Iqpj Aiketi * Jockey wheel * Wooden floor * Aluminium sidewalls with railing * Rear wall foldable ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We explicitly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend viewing and inspection to avoid any misunderstandings regarding condition or suitability. Inspections are possible at any time by appointment and are expressly encouraged!!! The stated internal dimensions are approximate. For new vehicles, prices are plus delivery costs and registration document fees! TRADE-INS ACCEPTED FOR ALMOST ANYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, največja dovoljena obremenitev: 16.250 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2016, Leto izdelave: 2016, Interna številka vozila: G300388 Od takoj na voljo na našem dvorišču v Kaufungenu Več INFORMACIJ na: * Golec Nutzfahrzeuge GmbH (nemščina, angleščina, bolgarščina, ruščina) * Viktoria Sologubova (poljščina, ruščina, ukrajinščina, angleščina) Lastna teža 3.750 kg Pridržujemo si pravico do napak Z veseljem vzamemo vaše rabljeno vozilo v račun. Možnost financiranja neposredno pri nas v podjetju. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko. Itedpfeyxiyqsx Aikoi ----.

Stanje: rabljeno, največja dovoljena obremenitev: 14.100 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2012, dolžina tovornega prostora: 7.100 mm, Leto izdelave: 2012, Interna številka vozila: G185 Na voljo takoj na našem dvorišču v Kaufungenu Več INFO na: * Golec Nutzfahrzeuge GmbH (nemško, angleško, bolgarsko, rusko) * Viktoria Sologubova (poljsko, rusko, ukrajinsko, angleško) Lastna teža 3.900 kg Dovoljena skupna masa 39.000 kg Dolžina nakladalnega prostora 7.100 mm Pridržujemo si pravico do napak. Vaše rabljeno vozilo z veseljem vzamemo v račun. Možnost financiranja neposredno pri nas v podjetju. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko. Itodpjwcuzbjfx Aikji

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis: Iodpfsri Hihex Aikoti Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with 'Load-Lock profile' for lashing strap attachment 24 t, 2-speed landing gear, single-sided operation Side underrun protection, aluminum Rear underrun protection, galvanized steel Quarter-shell mudguards in front of and behind axle assembly With anti-spray mud flaps compliant with EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fixing kit Axles & Suspension: SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser alignment' reduces tire wear and fuel consumption 1st axle automatic lift axle, additionally electrically operable from the truck Includes forced lowering and start-up aid, no installation required on truck Brake System: 2-line compressed air braking system Spring-loaded parking brake EBS by Wabco, electronic braking system with EBS socket at the front, without connection cable With raise & lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS CAN bus signal, display via monitor Wheels and Tires: 385/65 R22.5" / 6 steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side LED marker lights (amber) 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connection cable 2 additional LED work lights at the rear, controlled via reverse light Floor: Approximately 30 mm thick phenolic plywood, mounted on continuous longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg at the bulkhead Drop-in Slats: 5 rows of aluminum V-insert slats 2 pairs of Vario steel slats, in conjunction with Vario beams for fore and aft load securing (then no insert slats required in the area of the steel slats) Rear Portal Doors: Double-winged, each with 2 internal lock rods. Tarp with welded horizontal and vertical belts Unladen weight: 5,960 kg Offer and pictures non-binding

Stanje: rabljeno, največja dovoljena obremenitev: 15.730 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 07/2028, Leto izdelave: 2021, Interna številka vozila: G300385 Na voljo takoj na našem dvorišču v Kaufungenu Več INFO na: * Golec Nutzfahrzeuge GmbH (nemščina, angleščina, bolgarščina, ruščina) * Viktoria Sologubova (poljščina, ruščina, ukrajinščina, angleščina) Lastna masa 3.270 kg Isdsxnuk Repfx Aiksti 5.500 mm nakladalna površina Bobnaste zavore Pridržujemo si pravico do napak. Vaše rabljeno vozilo z veseljem vzamemo v vračilo. Financiranje neposredno pri nas v podjetju možno. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko. ----.

Stanje: rabljeno, največja dovoljena obremenitev: 3.070 kg, skupna masa: 5.990 kg, konfiguracija osi: 1 os, prva registracija: 05/2020, dolžina tovornega prostora: 7.700 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 3.130 mm, prostornina tovornega prostora: 60 m³, Oprema: ABS, * GNIOTPOL G4080 Jumbo tovorna prikolica 1-osna Isdjwbxvtopfx Aiketi * Prva registracija 05/2020 * poškodovan - popolnoma vozen * GVW: 5,99t, Nosilnost: 3,07t * 215/75R 17,5 (5/6-11/11mm, rezervno kolo 7mm) * SAF os, bobnaste zavore, zračno vzmetenje, dviganje-spuščanje * 7,70m x 2,50m x 3,13m aluminijasta portalna vrata * Aluminijasta tla, drsna ponjava * Nakladalna višina 0,93m * Sidrne ušesca * Pocinkana vlečna palica, nizko speta, 40mm uho ----Naš delovni čas: * Ponedeljek - četrtek: 08:00 - 17:00 * Petek: 08:00 - 15:00 * Izven delovnega časa smo na voljo po dogovoru * WhatsApp

Stanje: dober (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, prva registracija: 05/2020, dolžina tovornega prostora: 8.550 mm, širina tovornega prostora: 2.500 mm, skupna dolžina: 10.100 mm, skupna širina: 2.550 mm, skupna višina: 1.020 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 17.5, medosna razdalja: 6.350 mm, Leto izdelave: 2020, Oprema: ABS, = Further Options and Accessories = - EBS - Rear air suspension = Remarks = - Jumbo two-axle trailer (Type Moeslein ANH Platform) - Platform body dimensions: length 855 cm x width 250 cm - Loading height: 98 cm - Stanchions - Lashing points - Drawbar length: 290 cm - Coupling diameter: 50 mm - Multiple stainless steel toolboxes - 10-ton axles - In good condition! = Additional Information = Axle configuration Tyre size: 245/70 17.5 Suspension: air suspension Front axle: twin tyres; Max. axle load: 10,000 kg; steering; left outer tyre tread: 50%; right outer tyre tread: 50% Rear axle: twin tyres; Max. axle load: 10,000 kg; left inner tyre tread: 60%; left outer tyre tread: 60%; right inner tyre tread: 60%; right outer tyre tread: 60% Weights Unladen weight: 4,170 kg Payload: 15,830 kg Gross vehicle weight: 20,000 kg Itedpfx Aszc H Sdsikji Functional Body manufacturer: Jumbo Moeslein ANH Platform Maintenance, History and Condition Number of owners: 1 Technical condition: good Visual condition: good Identification Registration number: 92-WX-GG Product safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17, 6673DB ANDELST, NL

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 01/2007, skupna dolžina: 11.000 mm, skupna širina: 2.550 mm, vzmetenje: zrak, medosna razdalja: 8.150 mm, barva: srebrn, Leto izdelave: 2007, Oprema: ABS, = Additional Options and Accessories = Itjdpfx Aijx Ixbvskei - EBS - Rear doors - Lift axle - LED lights - LED work lights - Air suspension - Roll tarp cover - SAF axles - Disc brakes = Notes = Fliegl DHKA350 blower tipper Year: 01-2007 55m³ Blower tipper/screw/airlock 2 partitions First axle: lift axle SAF axles Dutch Trailer APK/TÜV = Further Information = Axle configuration Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 6,660 kg Payload: 32,340 kg GVW: 39,000 kg Functional Tipping direction: Rear Condition Technical condition: Very good Visual condition: Very good Damages: None Identification Registration: OJ-38-KN Further Information Please contact John Hesselink or Christel Hesselink for more information. = Company Information = Looking to finance this vehicle? No problem. We can quickly arrange a favourable finance lease contract for you with terms of 12, 24, 36, 48, or 60 months. All photos and further information can be found at or contact us directly.

Stanje: rabljeno, lastna masa: 6.080 kg, največja dovoljena obremenitev: 17.920 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2011, naslednji pregled (TÜV): 09/2025, dolžina tovornega prostora: 8.080 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.146 mm, prostornina tovornega prostora: 43 m³, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, barva: bela, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385 / 65 R 22,5, velikost zadnje pnevmatike: 385 / 65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, dvižna zadnja plošča, Osnovna barva: bela Dodatna oprema ABS, nakladalna ploščad, zračno vzmetenje, kolutna zavora, vzmetenje: zračno-dvigljivo, nosilnost (kg): 17920 Tip nadgradnje: 3-osna škatlasta prikolica L x Š x V 8.080 x 2.500 x 2.146 mm, nakladalna ploščad BÄR BC 1.500 S 4, aluminijasta pločevina 1.600 mm, 3 vrste priveznic desno in levo, 8 vrst priveznic v tleh in strehi, osi Mercedes Benz z zračnim vzmetenjem s funkcijo dviga in spusta, ABS, elektrika 24 V - 15 polna, zračni priključek Duomatic, vlečni drog z ušesom 40 mm Itodpex Swdqefx Aikei

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, From ongoing production Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 kg / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm loading deck Width: 2,520 mm Loading height: 860 mm Additional information Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Full-width rear spray flap (not compatible with forklift holder) Half-shell mudguards on 1st axle with anti-spray flaps Anti-spray flaps behind 2nd and 3rd axles Plastic toolbox Extendable width up to 3,000 mm Storage compartment for timber planks positioned centrally on the loading area 70 mm timber planks for widening to 3,000 mm Tie-down points for low-loader 1 pair of lashing cut-outs in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes on the outer frame of the gooseneck, each 5 t (for attaching tension belts) 7 pairs of lashing mushrooms flush-mounted on top and on the sides of the outer frame, each 10 t 1 in front on the gooseneck, 6 in the low-bed Pairs of ring lashings flush-mounted in the outer frame, each 5 t (can be converted to stake pockets) Additional pairs of folding lashing points, each 10 t 1 on the gooseneck 1 recessed in the floor behind the last axle Drawbar equipment for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles and suspension Drum brake axles, manufacturer’s choice “Axle/chassis laser alignment” for reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancer) Wheels and tires 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system Dual-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connector lines to the tractor unit 24 V ABS and ALB, with ABS plug at the front and connecting cable Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable Iodpfxouytx Ss Aikjti LED beacon with holder, switched via parking light (removable beacon) Pair of double warning boards, LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/chequer plate decking Storage compartment recessed into the transition slope to the gooseneck Then approx. 70 mm softwood floor, in wheel arch area with steel/chequer plate decking Rear bevel with 70 mm softwood floor Low bed area including rear bevel 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional lower ramp safety (prevents lateral slippage of ramps, not compatible with side hydraulic ramp adjustment) Wooden covering (tip area with steel/chequer plate) Hydraulic operation via tractor PTO with restrictor, operation on driver side left Hydraulic connection with SVK plug NW 10/3, incl. connection hose Paintwork Frame hot-dip galvanized including passivation Access ramps hot-dip galvanized plus freight / provision ex works 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Curb weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: Plus pre-carriage / handling from storage location 26639 Wiesmoor: €1,280.00 net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race bearing Folding rear support Wheel chocks with holder Rear mudflaps across full width 1 plastic toolbox Preparation for widening to 3,000 mm (holes in outer frame with covers, not in rear bevel) Lashing rings for low-bed trailer 1 pair of lashing openings in the front beam on the cranked section, each rated 10 t 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated 10 t 1 x in front on the cranked section 5 x in the low-bed section 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for securing straps) 5 x cranked section, 6 x low-bed, 1 x rear bevel Drawbar coupling (for turntable trailer) Drawbar with tested 40 mm towing eye Height adjustment of drawbar by spring Axles & suspension: Drum brake axles, manufacturer’s choice Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushing and mechanical load equalization (rocker equalizer) Wheels and tires: 235 / 75 R 17.5” manufacturer’s choice Steel rims, dual arrangement, factory silver Brake system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, lines extended by approx. 60 cm Without ABS, but with mechanical ALB; maximum approved speed 60 km/h Electrics: 12 Volt, multi-chamber lights, no side LED (yellow) lighting, reflectors on side 2 white position lights at front 2 white/red marker lights at rear Itsdswlmr Depfx Aikji 1 x 7-pin 12 Volt plug at front, with connection cable, extended by approx. 60 cm 1 LED beacon with holder, switched via sidelights (lamp removable) 2 pairs of warning plates, double LED illuminated and extendable to 3,000 mm Floor: Cranked section at front with steel / checker plate covering Stowage box recessed in the ramp transition near the cranked section Then with 70 mm softwood flooring, steel / checker plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-bed area incl. rear bevel 5,900 mm Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood covering (front edge with steel/checker plate) Hydraulically operated via tractor PTO with throttle, operation LH side compartment Hydraulic connection with SVK plug NW 10/3, incl. hose Operating notes: For 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The stated total weight is technically possible; depending on the load, it may not be possible to achieve total weight while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of registration / Signs: Registration country: Germany With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (agricultural/forestry), (Switzerland max. 40 km/h approval possible) Prepared for double-line license plate holder Without contour marking / reflective tape per ECE R 048 Paintwork: Frame RAL 7021, black-grey "10 years warranty against rust-through" Drawbar hot-dip galvanized Ramps hot-dip

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit Isdpfxevv D Ixs Aikjti 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900 / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck Width: 2,520mm Loading height: 860mm Further information: plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net Leasing offer: Term 48 months, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift mounting) Semi-shell fenders on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles Isdpfx Aiev D T R Eekoti 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm) Central storage compartment for wooden planks on the loading area 70 mm wooden planks for extension to 3,000 mm Lashing points for low-loader 1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps) 7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed) First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm 5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets) 2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle) Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring mechanism Axles & Suspension Drum brake axles, brand per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235/75 R 17.5'', per manufacturer’s choice Steel twin wheels, factory silver finish Braking system Dual-line compressed air brake system Spring-operated parking brake Vehicle stability control system Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale) 2 non-interchangeable coupling heads at front with connection lines to tractor unit 24V EBS, electronic braking system with EBS connector at front and connecting cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane control lamps at rear 2 x 7-pin non-interchangeable connectors at front, with connection cable 1 LED revolving beacon with holder, switched via parking light, removable 2 pairs of warning panels, double LED-lit and extendable to 3,000mm Floor Gooseneck front with steel/chequer plate cover Storage compartment recessed in gooseneck ramp Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate Rear bevel with 70 mm softwood flooring Low-loader platform including rear bevel: 6,500mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, side mounted

Stanje: novo, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 630 mm, skupna širina: 2.550 mm, Vehicle / Body type: Tandem Low-bed Trailer First Registration: New vehicle Gross Weight: 10,500 kg Unladen Weight: 2,500 kg Payload: 8,000 kg Overall Length: 7,280 mm Loading Length: Platform length approx. 5,500 mm Width: Platform width 2,050 mm / 2,550 mm Loading Height: Platform height 630 mm Further Information: plus pre-carriage / provision ex works from storage location 26639 Wiesmoor €1,280.00 / net - Overall height approx.: 2,900 mm - Side wall height approx.: 400 mm - Frame RAL 5001 Green Blue Chassis Central Axle Low-bed Trailer Fine-grain steel welded construction Telescopic support leg at front Telescopic rear supports Wheel chocks with holders Steel fenders over both wheels Drawbar fitting central axle trailer Drawbar with tested 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles at our discretion, with tapered roller bearings and S-cam brakes "Axles/chassis laser-aligned" for reduced tyre wear and lower fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balance) Wheels and Tyres 235 / 75 R 17.5" as selected by manufacturer Steel rims, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle, ABS and ALB, with ABS socket at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Iodpfx Aiswwab Aeksti Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, TTS Platform Deep-set steel trough, platform floor with steel/chequer plate finish, steel side walls solidly welded to the floor Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle, 24 Volt ABS and ALB, with ABS socket at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate illumination (Note: with certain towing vehicles, incorrect diagnoses may occur even if functionality is present) 2 white LED position lights at the front 2 white/red LED marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable, parking sockets for electrics / ABS / air connections on the drawbar TTS Platform Deep-set steel trough, platform floor with steel/chequer plate finish, steel side walls solidly welded to the floor Platform length 5,500 mm Trough front and sides with "Load-Lock profile" for lashing strap attachment (8 pcs. front, 16 pcs. per side) Note: Minor floor unevenness possible due to welding distortion! 2 pairs of lashing rings, 1 x at the front corners of the steel trough and 1 x at the rear floor, each 5 t 3 additional pairs of lashing rings in the floor, each 5 t 4 pairs of lashing rings bolted to the side walls Loading Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable, with handle on the ramps Ramp surface with "Mega Grip" from serrated grating (tip section with steel/chequer plate) with gas strut for single-person operation

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A Ijdpfxorducpj Aiksti

Stanje: novo, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information Chassis: Low-bed semi-trailer Steel welded structure, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Rear support foldable 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mudflap Mud flaps with anti-spray in front of the 1st axle and behind each axle, in accordance with EU regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width to 3,000 mm (not at the rear taper) (Note: The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess over rear axles, extending to the rear, approx. 3,000 mm long, 650 mm wide, and 230 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess on side of main frame, approx. 300 mm from front and some 200 mm before rear taper Itsdpfx Aeut Idneikji Lashing points low-loader 11 pairs of lashing mushrooms, integrated top and side of the outer frame, each 10t 2x on gooseneck 9x distributed on load floor 2 pairs of lashing eyes front on gooseneck, each 5t 3 pairs of swivel lashing eyes on gooseneck, each 5t 2 pairs of folding lashing eyes additionally embedded in load floor, each 10t 1x at beginning of load floor 1x at end of rear taper 1 pair of preparation on the slope from gooseneck for 6.7t screw-on lashing eye (JDT) 8 pairs of ring lashing eyes recessed in outer frame, each 5t (convertible to stanchion pockets) 1 pair screw-on lashing eyes, each 6.7t (JDT), with large flange plate incl. thread as counternut Axles & suspension SAF or BPW drum brake axles, manufacturer's choice “Axle/chassis laser alignment” to reduce tire wear and fuel consumption Last axle is self-steering, with automatic reversing lock via reversing light and additional manual lock function via push button on vehicle Air suspension Wheels and tires 235 / 75 R 17.5" Manufacturer's choice Steel rims, twin configuration, factory silver Braking system 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake 24 Volt EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor units that ensure effective ABS functionality! 2 coded coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN-bus signal, for display in cab, truck must be appropriately equipped, no truck installation (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system according to ECE R 141, display in tractor cab via EBS, truck installation required Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to indicator "flashing side markers" 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin coded sockets at front, without connecting cable 1 LED revolving beacon

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400 / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net Chassis Low-bed trailer Steel welded construction Turntable with robust ball bearing ring Rear support, foldable 2 wheel chocks with holders Rear splash guards full width (not in combination with forklift holder) 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Iedpeynvrwefx Aikoti Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel) Tie-down points low loader 1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t 1 x at the front on the cranked section 5 x in the low-bed 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks) 5 x cranked section, 6 x low-bed and 1 x rear bevel Drawbar equipment Turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + Suspension Drum brake axles by manufacturer’s choice "Axles / chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing) Wheels and Tires 235 / 75 R 17.5" by manufacturer’s choice Steel twin rims, factory silver Braking system 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm Without ABS, but with mechanical ALB, thus max. 60 km/h permitted Electrics 12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors 2 white position lights front 2 white/red lane marker lights rear 1 x 7-pin 12V plug front, with extension cable approx. 60 cm 1 LED beacon with bracket, switched via sidelights (removable light) 2 pairs warning plates illuminated, extendable to 3,000 mm Floor Cranked section front with steel/chequer plate covering Stow box recessed in transition bevel to cranked section then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate Rear bevel with 70 mm softwood floor Low-bed loading area incl. rear bevel 5900 mm Ramps Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable with timber covering (front area with steel/chequer plate) Hydraulic via tractor auxiliary drive with restrictor, operation side FR left Hydraulic connection with SVK plug NW 10/3 incl. connector hose Operating notes At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted! The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect) Country of registration / plates Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry, (country of registration Switzerland max. 40 km/h possible) prepared for double-line license plate holder without outline marking / reflective strips according to ECE R 048, Paintwork Frame hot-dip galvanized incl. passivation "15 year warranty against penetra—"

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Load length: total 8,670 mm; gooseneck section 2,170 mm; loading deck 6,500 mm Width: 2,520 mm Loading height: 860 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: 1,280.00 €/net Chassis Low-bed trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holder Aluminum side underrun protection Full-width rear spray flaps (not in conjunction with forklift holder) Quarter-shell mudguards in front of 1st axle Anti-spray flaps behind the 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable deck widenings to 3,000 mm (not in rear incline area) (Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading deck 70 mm timber planks for widening to 3,000 mm Tie-down points low-bed 1 pair of lashing recesses in the longitudinal beam at the front, integrated into gooseneck, each 10 t 4 pairs of lashing holes in outer frame of gooseneck, each 5 t (for attaching tension straps) 7 pairs of lashing mushrooms, integrated top and side in outer frame, each 10 t - 1 x front in gooseneck section - 6 x on lower deck First lashing eye 250 mm from front, last max. 250 mm from rear; maximum distance between lashing eyes 1,100 mm 5 pairs of ring lashing eyes, integrated into the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10 t - 1 x on gooseneck (overhanging) - 1 x in floor behind last axle Towing unit trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + suspension BPW drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancing) Wheels and tires 235 / 75 R 17.5" manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-actuated parking brake 2 error-proof coupling heads at the front with connecting lines to towing vehicle 24V ABS and ALB, with ABS socket at the front and connecting cable Attention: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane indicator lights at the rear 2 x 7-pin error-proof plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (removable lamp) 2 pairs of warning boards, double-sided LED illuminated and extendable to 3,000 mm Floor Gooseneck front with steel/chequer plate covering Storage box recessed into drive-over slope of gooseneck Followed by approx. 70 mm softwood floor, steel/chequer plate covering at wheel arch area Rear slope with 70 mm softwood floor Low-bed area incl. rear slope: 6,500 mm Access ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety lock, foldable at bottom (prevents lateral slippage, not in conjunction with side hydraulic ramp adjustment) Iedpowlmr Rsfx Aikjti Wood surfaced (tip area with steel/chequer plate) With spring-assisted lifting Operating instructions With 10,000 kg axle load, a special permit is required, only

Stanje: rabljeno, največja dovoljena obremenitev: 6.800 kg, skupna masa: 8.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2012, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 700 mm, skupna širina: 2.550 mm, Skupna masa: 8.900 kg Prazna masa: 2.100 kg Nosilnost: 6.800 kg Skupna dolžina: 5.950 mm Nakladalna dolžina: dolžina kesona 4.000 mm Širina: širina kesona 2.050 mm / 2.550 mm Nakladalna višina: višina kesona cca 630 mm Dodatne informacije Iodoycbkbopfx Aiketi - Prednja teleskopska podporna noga - Vlečna gred nastavljiva po višini preko vretena - Varjena konstrukcija iz drobnozrnatega jekla - Parabolično vzmetenje - Jekleno rebrasto dno - Velik paket pritrdišč - Rampe iz mrežaste rešetke

Stanje: rabljeno, največja dovoljena obremenitev: 7.618 kg, skupna masa: 9.990 kg, konfiguracija osi: 2 osi, prva registracija: 11/2020, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 250 mm, skupna širina: 2.550 mm, skupna višina: 3.020 mm, Humbauer tandem prikolica z 2 osmi in rampami Tip: HS 105020 BS Nosilnost: 7618 kg Material: aluminij Zavora: boben Os: SMB 3x podporna točka 2x rampi (dolžina: 2,30 m in širina: 0,45 m) Dolžina: 5,00 m Širina: 2,00 m Višina: 0,25 m Z veseljem vam pomagamo tudi pri financiranju/leasingu z našimi partnerji. Ijdpfx Aiey Unvcekjti Vsi podatki so brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: rabljeno, Leto izdelave: 2020, FLIEGL SDS350 15 metrov X-TRA DOLGA RAVNA kontejnerska šasija za 2 izmenljivi nadgradnji ali 2 kontejnerja !EKSTRA DOLG! !! Dolžina 14,85 m!! • Pripravljeno za 2 x 7,45 m nadgradnji • ali 2 x 20-ft kontejnerja • ravno šasijo • 3 x SAF zračno vzmetene osi, vsaka 8 t • Dvigalo/spuščanje • ABS • ASR Mere in teža vozila: • Dovoljena skupna masa: 35.000 kg • Lastna teža: 4.100 kg • Mere: 14.850 x 2.550 x 1.200 mm • Pnevmatske gume: 385/55 R22.5 • Globina profila: 13/13/11/12/12/9 mm - zelo dobro stanje, skoraj ni bil v uporabi! - Tehnični pregled / HU / SP: NOVO! - SP: 01/26 - Nemška polprikolica! - Prvi lastnik Pridržujemo si pravico do napak in vmesne prodaje! = Dodatne informacije = Letnik: 2020 Za več informacij kontaktirajte Joannis Arpantzanis ali Kai Bühler. Itjdpfxewtbvto Aikei

Stanje: dober (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, prva registracija: 10/2011, dolžina tovornega prostora: 12.450 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.280 mm, skupna dolžina: 12.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, medosna razdalja: 8.770 mm, barva: rdeča, Leto izdelave: 2011, Konfiguracija osi Znamka osi: BPW Zadnja os 1: Dvižna os; Največja nosilnost osi: 10.000 kg; Profil pnevmatike levo: 40%; Profil pnevmatike desno: 40%; Vzmetenje: zračno vzmetenje Zadnja os 2: Največja nosilnost osi: 10.000 kg; Krmiljena; Profil pnevmatike levo: 40%; Profil pnevmatike desno: 40% Teže Lastna teža: 6.200 kg Nosilnost: 28.800 kg Dovoljena skupna masa: 35.000 kg Itsdsvpvygjpfx Aiksi Funkcionalno Debelina stene: 7 mm Stanje Tehnično stanje: dobro Videz: dober Identifikacija Registrska številka: OL-52-LX