Faymonville Spnz-5 nakup rabljenega (33.581)

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: Fedpfxotvfkfs Al Hepg - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: rabljeno, največja dovoljena obremenitev: 36.650 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Equipment extract Load area: - Load platform with extendable design featuring pneumatically operated locking system. - 2 pairs of flat lashing rings (LC 5,000 daN). - 1 pair of lashing rings in the gooseneck (LC 10,000 daN). - 6 pairs of outward-folding lashing rings (LC 5,000 daN). - 3 pairs of outward-folding lashing rings (LC 10,000 daN). - Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN). Landing legs: - JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load). Tyres: - Tyres 245/70 R 17.5 – brand at our discretion. Load index (146/146F). Axles: - BPW axles, hydro-mechanically forced steering. - Air suspension with raising and lowering valve. - Axle tools. Brake system: Fsdjx Epznjpfx Al Hspg - Brake system compliant with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel construction: - Steel structure made of high-strength fine-grain steel grades: S355J2+N/S355MC (yield strength 355 MPa) and S690QL/S700MC (yield strength 690 MPa). Painting: - Premium, durable corrosion protection through 2-component (2K) zinc dust primer applied to the standard shot-blasted welded frame. - High-quality 2-component (2K) topcoat, single-color in RAL 3002 Carmine Red. - Rear section metallized and painted in RAL 9010 Pure White. - Rims silver (no metallic paint available). Electrical system: - Electrical installation as per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098). Warning signs: - One holder each on the gooseneck and rear panel, left and right, for warning signs including socket. Including the following additional features: - Remote steering from front and rear via cable remote with push buttons, includes single-track control of the axles (no installation in the tractor unit required). - Electro-hydraulic unit (± 45 kg). - 4 wheel chocks with holders on the front wall (± 5 kg). - 2-inch kingpin. - One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35 kg). - Yellow-red air couplings on the galvanized front connection rail. - Yellow reflector tape in accordance with EU regulations on the sides, extension, and rear of the trailer. - European reflector signs (red-yellow) on the rear of the trailer. - One mud flap on the rear of the trailer. - Manual and description on USB stick. - Holder for a beacon on the rear of the trailer. - Load platform with heavy-duty hardwood floor. - 9 pairs of stake pockets, approx. 100 x 50 mm, in the outer frame of the load area (± 27 kg). - Extensions, galvanized, extendable up to approx. 230 mm each side (± 230 kg). - Spiral cable for supplying the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with NATO-NATO connections. - Galvanized supports under the sloped section of the load area. - Anti-slip sand coating applied to the central beam. - 6 pairs of WADER container locks in the load area for 1x20' container, 2x20' containers or 1x40' container; an additional locking position is provided in the extension for a 45' container (± 90 kg). - 4 pairs of transverse stake pocket strips, mounted across the load area for loose stakes approx. 100 x 50 mm (± 145 kg). - Storage for max. 9 pairs of loose stakes, approx. 100 x 50 mm, on the inside of front wall.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) Fpodorgzv Nopfx Al Hog * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 73.540 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from equipment features. Full equipment list available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of folding lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center section of the gooseneck (LC 10,600 daN) * Suitable for 6x4 or 8x4 2-axle tractor units Compact Front Chassis: * Hook mounts at front and rear, length approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator Deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle Rear Chassis: * Mechanical bolt-lug coupling for attaching a low bed at the front * Rear end cross member chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front chassis: 8 x 285/70 R19.5 M+S at manufacturer’s choice * Rear chassis: 16 x 285/70 R19.5 M+S at manufacturer’s choice * Load index 150/148J Paintwork: * Complete steel construction automatically blasted with shot-blasting system after welding. Second blasting with corundum for optimal adhesion of coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure superior corrosion protection * Final paint in 2 coats of 2K topcoat, single color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish * 3.5” kingpin * Truck hydraulic connection with flow regulator (20 l/min) * Crane for supply line suspension; tractor unit fuel tank must have a minimum capacity of 80 l * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by customer ex works * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2 * Tool kit Art. No. 612452 * Multi-coupler hydraulic connections on the gooseneck * Front chassis with separate air connection for air impact wrench * BEKA-MAX central lubrication for a 2-axle chassis with standard grease NLGI-2 * One 7-pin socket left and right rear on front chassis for warning signs * Threaded insertion option (ø approx. 40 mm) every 500 mm on the upper flange of the excavator deck’s outer tube for lashing rings (LC 16,000 daN) * Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle chassis with standard grease NLGI-2 * Socket on rear chassis for remote cable control of steering * Rear chassis with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on gooseneck left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of diesel engine * Operation of steering, in addition to cable remote control Fpjdpfjxbmplsx Al Hjg * One LED work light left and right on gooseneck rear plate with protect...

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment Fpjdpfjv Sw E Aox Al Heg * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge

Stanje: rabljeno, največja dovoljena obremenitev: 37.535 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: * Extendable loading platform with pneumatically actuated locking mechanism * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Follow-up steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Braking System: * Braking system compliant with EU regulations with EBS-E (2S2M) without interconnecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and long-lasting corrosion protection for the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-colour top coat finish in RAL 3002 carmine red * Silver rims * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings at the galvanised front connection panel * 4 wheel chocks with holders * 2-inch kingpin * Yellow reflector tape according to EU regulations, at the sides, on the extension, and rear of trailer * European reflector plates (red-yellow) at the rear of the trailer * Loading platform equipped with approx. 30 mm thick wooden floor, enclosed in omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 1 spare wheel holder under the loading platform, left side in the direction of travel, without spare wheel Fpsdpoxgk U Nsfx Al Hog * 1 mudflap at the rear of the trailer * Manual and description on USB stick * One bracket for a warning beacon at the rear of the trailer * On the gooseneck and rear panel, each left and right, a bracket for warning boards including socket * 80 km/h speed label at rear and on both sides * Load manometer for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading floor, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * Stainless steel toolbox, approx. 600 x 350 x 600 mm, under the loading platform, left side in direction of travel * 4 pairs of stake pocket rails mounted lengthwise on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status * 2 LED reverse lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel Fedsw Tpq Djpfx Al Hspg - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 38.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Platform with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching lashing straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axle: * BPW axles and suspension * All axles hydro-mechanically force-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical installation according to EU regulations * LED lighting, 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets, connections according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically blasted after welding using a wheel blasting machine * Second blasting treatment with corundum for optimal adhesion of the coating system * Final coat with 2 layers of 2K topcoat, in a single colour RAL 3002 Carmine Red conforming to RAL system 841GL * Rims in silver grey * Rear end metallised and painted RAL 9010 (Pure White) * No metallic paint possible * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Fedew Tpr Iopfx Al Hjpg Accessories: * Remote steering from front and rear via cable remote control with push buttons, axle single-track control (without installation in the tractor unit) * Electro-hydraulic power pack * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * At the galvanised connection panel at the front, yellow-red air line couplings * At the gooseneck and rear left and right, one holder each for warning panels, including socket * 10 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container lock pockets in the platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container; the extension includes an additional locking point for a 45' container * 4 pairs of crosswise stanchion pocket bars in the platform, for plug-in stanchions approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stanchions bolted to the inside of the front bulkhead * Access ladder mounted front left and right in direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the platform on the

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Fpedpsxtc Uhjfx Al Hjg Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit Fpedpfxetx Nwnj Al Hog HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full specification available on request. Gooseneck * With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform * Extendable version * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Legs * JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle rigid, remaining axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer * High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red * Wheels painted silver Included Accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanised front connection strip * 4 chocks with holders mounted on the front wall * Spare wheel holder in front of front wall * Electro-hydraulic unit * Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required) * European reflector boards (red-yellow) at rear of trailer * Yellow reflective tape complying with EU regulations on the sides, extension and rear * On gooseneck and rear plate—left and right—each with holder for warning boards including connector * Mount for rotating beacon at the rear of the trailer * Galvanized folding supports below the bevel of the loading platform * Axle load pressure gauge including axle-load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers * Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform * Galvanized extensions, extendable by approx. 230 mm per side * Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump * 2 LED reversing lights mounted at the rear * Acoustic reverse warning signal * HRM metallisation (High Resistance Metallisation) Fedpfsv Etx Eex Al Hepg

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Area * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood floor approx. 48 mm thick, chequered plate overlay above axles * Cut-outs in the loading area outer frame for attaching tension belts (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5, load index (146/146 F) * Make of our choice Landing legs: Fpedpfjw Tprzsx Al Hsg * JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (approx. 50 t tested capacity) Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paint finish: First class and durable corrosion protection * High-quality two-component (2K) single-colour top coat in RAL 3002 carmine red. * Rear section metallised and painted in RAL 9010 (pure white) Steel construction: Steel structure made of high-strength fine-grained steels. * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Hot-dip galvanised steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanised front terminal strip * Spare wheel carrier in front of the bulkhead * Electro-hydraulic power unit * Remote steering front and rear via cable remote control with push buttons, includes axle tracking control (without installation in tractor unit) * Recess at the rear of the gooseneck for aluminium approach ramps * Anchor rail for aluminium approach ramps at the rear of the vehicle * Galvanised folding supports under the loading area rear chamfer * Aluminium drop sides and rear board on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H) * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * One galvanised toolbox integrated in the chamfered gooseneck * 4 pairs of WADER container locks in the loading area for a 20', 2x 20', 40' or 45' container * 8 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the loading area outer frame * Galvanised extensions, extendable by approx. 230 mm per side * Sliding anchor rails for aluminium approach ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard NLGI-2 grease and removable pump protection * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation), complete steel structure shot-peened to SA2.5–SA3, then wit

Stanje: novo, največja dovoljena obremenitev: 37.820 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available on request. Gooseneck: - Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading Platform: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) Fpsdpfx Ajw Tpqwjl Hsg - Wheel recesses with square climbing stripes approx. 15 x 15 mm, including widenings at the bottom - Between the 1st and 2nd axles, one fixed pair of wheel recesses approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-part removable galvanized covers over the wheel recesses (W approx. 670 mm), max. point load approx. 5 t/piece - Recess in the bevel and extending into the loading platform for accommodating excavator stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of folding-out lashing rings (LC 5,000 daN) - 3 pairs of folding-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) One-Piece Steel Ramps: - 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting system, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not need to be considered in the vehicle length in transport position Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load per axle: 12,000 kg - Electro-magnetic reverse lockout, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tool Tyres: - Tyres 235/75 R 17.5 3PMSF, brand of our choice - TPMS tyre monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. To display correctly, the tractor unit must be able to receive and show this data. Brake System: - WABCO brake system in compliance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa); S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system in accordance with EU regulations - 24 Volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front terminal bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot blasted with a turbine blasting system after welding - Second blasting process with corundum for optimum coating adhesion - HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection - Final paint with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system - Rims in silver - Rear section metallized and in RAL 9010 (con...

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: Fpedoxttc Ajpfx Al Heg * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit Fpsdowvzg Ropfx Al Hjg * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 07/2016, vzmetenje: zrak, Leto izdelave: 2016, Oprema: dvižna zadnja plošča, Vzmetenje: zračno vzmetenje Zadnja os 1: krmiljena Zadnja os 2: krmiljena Zadnja os 3: krmiljena Največja dovoljena masa: 48.000 kg Fsdpfx Alsvvwzrj Hjpg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Cena: na zahtevo Za več informacij se obrnite na Davida F Middelmana.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno * Sledilna krmiljena os * Hidravlične nakladalne rampe * Zračno vzmetenje -----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje Fjdpfox I Uyhjx Al Hjpg WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2020, barva: rdeča, Leto izdelave: 2020, Oprema: ABS, Rear axle 1: Dual tires Rear axle 2: Dual tires; Steering axle Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request Fpedpfxsx Upxxs Al Heg FAYMONVILLE F-S42-111A SEMI LOWBED TRAILER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Length 680 cm + 420 cm extendable, total platform length 1,100 cm Platform width 254 cm Platform height approx. 86 cm Gooseneck length 330 cm Lashing eyes, stake pockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowbed trailer built in 2016, but sold as new in 2020 We speak German Hablamos Español We speak English

Stanje: rabljeno, lastna masa: 20.320 kg, največja dovoljena obremenitev: 46.180 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, prva registracija: 01/2004, velikost pnevmatike: -, Leto izdelave: 2004, ref: 2220 Extra-low semi low-loader trailer, 3 rear axles + 1 front axle (Dolly) Max. permitted total weight: 66 t Removable gooseneck trailer Extendable trailer (up to 5 m) Trailer with 3 forced-steering axles (with manual remote control) Trailer can be operated with or without Dolly Total trailer length: 16.43 m + 5 m (extendable) Unladen weight: 20,320 kg + 2,520 kg for Dolly Gooseneck length: 4.43 m Fpsdpowcrzrsfx Al Heg Extra-low deck: Length 7.5 m + 5 m (extendable) Height: 0.5 m Trailer width: 2.74 m Deck above rear axles: Length 4.5 m Height: 1.05 m Excavator trough Removable hydraulic rear ramps and hydraulic ramp adjustment Trailer tyres: 285/70R19.5 Dolly tyres: 235/75R17.5 Serial numbers: YA9TL366B04113968 + 122B4113969

Stanje: rabljeno, barva: modra, Leto izdelave: 2016, Faymonville F-S43-1ABA. Baujahr: 2016. 10-Tonnen-SAF-Achsen. Zulässiges Gesamtgewicht: 42.000 kg. Sattellast: 18.000 kg. Servolenkung, 3 gelenkte Achsen. Luftfederung. Seilwinde. EBS, ABS, ALB. Hydraulik funktioniert über Duplo-Elektrik. Hydraulische Brücke vom Boden zum Schwanenhals. Länge: 3.000 mm. Zentralschmieranlage. 2-Punkt-Hydraulikabstützungen am Heck. 2-fach hydraulische Rampen: - hydraulisch links/rechts verschiebbar - Länge: 2.800 + 1.700 mm. Abmessungen: Schwanenhals: L: 3.800 mm. B: 2.480 mm. H: 1.400 mm. Sattellast: 1.150 mm. Ladefläche: L: 9.600 mm. B: 2.550 mm. H: 900 mm. Bereifung: 235/75R17,5, 70% Profil. Deutscher Anhänger! ID-Nr.: 449. Fodjxvzm Uopfx Al Hepg Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Offerten von Heinhuis, für alle von Heinhuis abgeschlossenen Verträge sowie für sämtliche diesen vorausgehenden Verhandlungen. Mit jeder Form der Reaktion akzeptieren Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, dass Sie diese Allgemeinen Geschäftsbedingungen zur Kenntnis genommen haben. Unsere Preise verstehen sich als Netto-Exportpreise. = Weitere Informationen = Baujahr: 2016 zulässiges Gesamtgewicht: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: novo, skupna dolžina: 19.000 mm, skupna širina: 600 mm, skupna višina: 450 mm, Leto izdelave: 2022, Color: Red Fsdpfxsuu Hixo Al Hepg Load capacity: 430,000 kg Extendable Manufacturer: Faymonville Model: G-Module Vesseldeck Year: 2022 Compatible with Goldhofer THP SL Coupling Heads G-Module SL lowbed coupling head Hydraulically extendable Basic width: 3,000 mm Hydraulically extendable to 4,700 mm Beam height: 450 mm Coupling length: 1,200 mm Weight: 4,500 kg 4 pairs of lashing rings (LC 16,000 daN) 2 alignment pins Control panel for hydraulic adjustments Color: RAL 3002 Telescopic Beams 1 pair of telescopic beams Length: 8,000 mm + 5,000 mm Total length: 13,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 9,600 kg Lashing rings every 1,000 mm LC 10,000 daN 430 MTO Compression joint at front and rear Color: RAL 3002 Elongation Beams 1 pair of elongation beams Coupling length: 6,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 4,300 kg Lashing rings every 1,000 mm LC 10,000 daN 560 MTO Compression joint at front and rear Color: RAL 3002 Coupling Pin 1 hydraulic coupling pin for G-Module 1 connection line kit for G-Module coupling pin = Further Information = Year of manufacture: 2022 Unladen weight: 18,500 kg General condition: very good Technical condition: very good Visual condition: very good Price: On request Contact Stefan Schaapveld for further information.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 20.000 kg, največja dovoljena obremenitev: 120.000 kg, konfiguracija osi: 3 osi, stanje pnevmatik: 70 odstotek, barva: rdeča, Leto izdelave: 2006, 3 dvižne in krmilne osi. Fedpfsyaaz Hsx Al Hopg Hidravlično vzmetenje. Višinsko nastavljiv vrat. Pomožni bencinski motor Hartz. Neodvisno brezžično krmiljenje. Hidravlične zadnje rampe za strojno obremenitev do 70 ton.

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: YAFTL40900001004, največja dovoljena obremenitev: 80.000 kg, skupna masa: 105.000 kg, velikost pnevmatike: 70%, medosna razdalja: 1.360 mm, barva: rdeča, Leto izdelave: 2009, Oprema: ABS, Country of manufacture: Netherlands Body options: Disc brakes, Central lubrication system, Moving floor, Forced steering, Full side opening Further information: Low-bed pipe carrier semi-trailer, extendable, hydraulic suspension, side width adjustable up to 3,500 mm interior and 4,200 mm exterior, latest generation pendular axles Fedpfx Alovtygfs Hspg Option to add a 2-axle dolly to create a pipe carrier combination 2+4. Load capacity 85 tons We have 2 identical units available in excellent condition.

Stanje: rabljeno, prevoženi kilometri: 960.000 km, moč: 221 kW (300,48 KM), prva registracija: 06/2012, vrsta goriva: dizel, skupna masa: 18.600 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 5, Oprema: dvižna zadnja plošča, klimatska naprava, * Daf FA LF 55.300 * Ročni menjalnik * Euro 5 EEV * Klimatska naprava * Spalna kabina * Tempomat * Stranska vrata * Hladilna enota Carrier (diesel + elektrika) * Krilna vrata * Dvižna ploščad * Notranja dolžina: ca. 7,85 m * Notranja širina: 2,48 m * Notranja višina: 2,36 m Fjdpfoy Rwzmex Al Hspg * Skupna dolžina: 10,05 m * Skupna širina: 2,55 m * Skupna višina: 3,80 m * Medosna razdalja: 5.850 mm * Skupna masa: 18.600 kg * VIN: XLRAE55GF0L416970 * KW: 221 * Delovna prostornina: 6693 ccm * Letnik: 2012 * Diferencirana obdavčitev Tel.:

Leto izdelave: 2026, stanje: rabljeno, lastna masa: 1.118 kg, kapaciteta baterije: 775 Ah, napetost baterije: 48 V, Tip baterije: 48 Voltov 5 PzS 775 Ah, Aquamatic in kroženje elektrolita v bateriji, posoda za baterijo DIN A, mere baterije: 832 x 631 x 784 mm, vozniški priključek: MRC 160A, tovarniško obnovljena GRUMA 48V pogonska baterija v jekleni posodi DIN A, napolnjena in pripravljena, s kroženjem elektrolita, vključno s kablom in priključkom MRC 160A, barva posode RAL 7021, Fedoy Rgrbjpfx Al Hspg