Doll Dollco-Antennenanhänger nakup rabljenega (187)

Stanje: novo, lastna masa: 3.900 kg, največja dovoljena obremenitev: 9.700 kg, skupna masa: 13.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.280 mm, širina tovornega prostora: 2.450 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, medosna razdalja: 1.270 mm, Leto izdelave: 2026, Oprema: ABS, spojka prikolice, HBTZ 137224 BS Tandem poševno odrezan 400 mm aluminijaste bočne stene Zadaj poševno odrezana nakladalna površina Višina nakladanja 870 mm Preme priznanega proizvajalca z zračnim vzmetenjem ABS Višinsko nastavljiva vlečna roka Enodelne vzmetne nakladalne rampe 3 pari 10 t pritrdilnih točk 8 parov 2 t pritrdilnih točk Popolnoma pocinkano Dedpfegi H Dpex Apwjkp Pnevmatike 205/65 R 17,5

Stanje: novo, lastna masa: 4.500 kg, največja dovoljena obremenitev: 14.500 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.459 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75r17,5, barva: srebrn, Leto izdelave: 2023, Oprema: ABS, dvižna zadnja plošča, nalagalnik, HBTZ 197224 Air Suspension Lift and Lowering Hot-dip galvanized Dksdpjlzigtefx Apwjp Loading height: approx. 870 mm Drawbar length: approx. 1800 mm Coupling height: approx. 745–1010 mm Approach angle: approx. 13° Plank length: approx. 3100 mm Plank width: approx. 760 mm Floor covering: 40 mm softwood planks 4 lashing eyes per side 10,000 kg per lashing point, recessed in the bridge floor 8 pairs of lashing rings on the outer frame – 2,000 kg per lashing point 50 mm towing eye, galvanized, reinforced, stepless adjustable height, loading area rear chamfered, front wall 400 mm galvanized steel, removable 400 mm aluminium drop sides, foldable and removable, corner stanchions galvanized, plug-in and removable, 2 foldable rear supports, telescopic, support winch, spring-applied parking brake, 2 foldable steel ramps, laterally adjustable, galvanized, gas strut ramp lifter: 1 gas spring per ramp, ramp covering of 50 mm softwood planks, ramp locking with turnbuckle, galvanized steel mudguard, foldable side underrun protection, EBS, LED lighting, side marker reflectors, air suspension, lift axle

Stanje: novo, lastna masa: 4.800 kg, največja dovoljena obremenitev: 14.200 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 400 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 1.400 mm, Leto izdelave: 2024, Oprema: ABS, HUMBAUR 19 t Construction Machinery Transporter Tandem Flatbed with TWIN TYRES REAR LOADING AREA TAPERED HBTZ 196524 BS / Hot-dip galvanized / Side aluminum drop sides with CENTRAL STANCHIONS Chassis frame hot-dip galvanized by immersion Side drop sides made of anodized aluminum with GALVANIZED CENTRAL STANCHION HOT-DIP GALVANIZED STEEL FRONT WALL INCLUDES: - SAF low bed axles - SPRING-ASSISTED RAMP LIFTER EQUIPMENT: • AIR SUSPENSION with raising and lowering function • SAF low bed axles • TWIN TYRES 235/75 R17.5 • EBS Electronic Braking System • 6 recessed 10 t lashing rings in platform floor • 14 recessed 2 t lashing rings in outer frame • Front support: reinforced 25 t (static) gear support leg with load and rapid gear • Rear support: 2 foldable supports on chassis frame • Loading ramps approx. 3,100 mm long and approx. 750 mm wide, laterally adjustable, hot-dip galvanized by immersion • Platform floor with wooden cover and STEEL tear plate above the wheels • WOODEN COVER in the loading ramps • SPRING-ASSISTED RAMP LIFTER • ALUMINUM DROP SIDES with galvanized CENTRAL STANCHIONS • HOT-DIP GALVANIZED STEEL FRONT WALL • Low loading height: only approx. 960 mm • Continuously height-adjustable drawbar • Coupling height approx. 800 - 1,000 mm • DIN towing eye Ø 50 mm • Rear loading area tapered • Mudguards with antispray system Optional, at extra charge: • Plastic toolbox under the loading platform Dedsfi D Epspfx Apwskp • Surcharge: 290,- Euro plus VAT => Delivery freight charges: 2.90 Euro plus VAT per km => Prices are ex-works D-86368 – Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex D-86368 - Gersthofen* *Sale to business customers only!* *Images may differ and are only for general guidance => may contain/show accessories at extra charge*

Stanje: novo, lastna masa: 5.680 kg, največja dovoljena obremenitev: 18.320 kg, skupna masa: 24.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, Leto izdelave: 2026, Oprema: ABS, Three-axle trailer BPW low-loader axles Electronic air suspension with 2 ride heights Lowering function for safe loading Brake system compliant with EC regulations with 2S/2M Drawbar with 50 mm towing eye Raising and lowering of the drawbar Djdpfx Apjh I H Ddewjkp 8 pairs of 10 t lashing rings recessed in the low-bed 6 pairs of 2 t lashing points above wheel cutouts 5 pairs of 3 t lashing/pocket sockets for 90x50 mm stanchions 50 mm softwood floor Chassis frame hot-dip galvanized by immersion bath Foldable side underrun protection Stanchion pocket package in outer frame One-piece hot-dip galvanized access ramps Laterally adjustable Direct-acting vertical spring supports

Stanje: novo, lastna masa: 252 kg, največja dovoljena obremenitev: 498 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.280 mm, vzmetenje: drugo, velikost pnevmatike: 145/80 r13, Oprema: spojka prikolice,

Stanje: novo, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 7,3 m³, vzmetenje: zrak, velikost pnevmatike: 435/50 r19,5 zoll, Leto izdelave: 2023, Oprema: ABS, HUMBAUR TANDEM THREE-WAY TIPPER (HTK UNIVERSAL) With AIR SUSPENSION!!! Chassis frame HOT-DIP GALVANIZED Platform frame HOT-DIP GALVANIZED Side panels HOT-DIP GALVANIZED Equipment: Permissible total weight: 18,000 kg Payload: approx. 13,700 kg Support load: 1,000 kg Loading platform approx. 5040 x 2420 mm Steel side panels approx. 600 mm high Side panel lifting springs for the side walls Fixed drawbar Reinforced 25t (static) gearbox support winch with load and fast gear 5 pairs of 6 t lashing rings recessed in the platform floor 2 foldable and telescopic support legs at the rear of the vehicle (hot-dip galvanized) 2-circuit ABS air brake system Integrated compartment for 2 aluminium loading ramps in the chassis frame Central locking system on sides and rear Plastic mudguards with anti-spray system 4 SPHERICAL TIPPING BEARINGS WIDE tyres, 4 x 435/50 R19.5 inch 15-pin 24 Volt electrical connector for 24 Volt lighting Dsdpfxsiciude Apwekp 7-pin 24 Volt ABS connector Compressed air connections RED/YELLOW Ø 50 mm DIN towing eye Coupling height approx. 790 - 1050 mm Hydraulic connection: SVK BG3 plug We optionally offer at extra charge: • 2 aluminium loading ramps, approx. 3570 x 400 mm, load capacity per pair 10,000 kg • Surcharge: net €2,650 plus VAT • 1x plastic toolbox mounted under the loading platform • Surcharge: net €330 plus VAT • Grilles over the rear lights • Surcharge: net €190 plus VAT => Freight costs for delivery: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general guidance only => may include/show optional equipment at extra charge*

Stanje: novo, lastna masa: 3.150 kg, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5 zoll, medosna razdalja: 990 mm, Leto izdelave: 2024, Oprema: ABS, HUMBAUR THREE-WAY TIPPER NEW MODEL 2023 (HTK PASS-THROUGH/SMB AXLES) GALA L => INCLUDING PASS-THROUGH DESIGN => AUTOMATIC REAR FLAP RELEASE => CHASSIS FRAME FULLY HOT-DIP GALVANIZED => PLATFORM FRAME FULLY HOT-DIP GALVANIZED => SIDE WALLS FULLY HOT-DIP GALVANIZED Equipment: Permissible total weight: kg Payload: approx. kg Support load: 500 kg Loading area approx. 5020 x 2420 mm Steel side walls approx. 450 mm high Side wall lifting springs (side walls) Fixed drawbar mounted, non-adjustable Reinforced 25 t gearbox support winch (static) with load and rapid gear 8 recessed 3 t lashing rings in platform floor 2 folding and extendable rear supports (hot-dip galvanized) Dual-circuit ABS compressed air braking system Central locking, side and rear Plastic mudguards with anti-spray system 4x 235/75 R17.5 inch tires 15-pin 24 volt electrical connector for 24 volt lighting 7-pin 24 volt ABS connector Compressed air connections RED and YELLOW Ø 40 mm DIN towing eye Coupling height approx. 800 mm Hydraulic connection: SVK BG3 plug Optional available at extra cost: *Gross vehicle weight increase to kg incl. kg support load = 1,490 EUR net Payload 9,200 kg Stronger brake cylinders and control valves as well as EBS • 2 aluminum ramps with 8 t load capacity, including rail compartment per pair • Surcharge: 2,250 EUR net plus VAT • 1x plastic toolbox • Surcharge: 290 EUR net plus VAT => Delivery freight charges: 2.90 EUR plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale only to business customers!* Dksdjiciulopfx Apwjp *Images may differ and are for general reference only => may contain/show accessories available at extra cost*

Stanje: novo, lastna masa: 965 kg, največja dovoljena obremenitev: 2.535 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.700 mm, širina tovornega prostora: 2.180 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 2,1 m³, vzmetenje: drugo, velikost pnevmatike: 13 zoll, medosna razdalja: 990 mm, Oprema: dvižna zadnja plošča, spojka prikolice, Universal transporter MTKA 354722, Gross vehicle weight rating 3500 kg, Tipping platform with double-acting hydraulics, drive-over ramp 900 mm high with special perforated pattern and gas springs. Dodpsgffnzofx Apwekp 8 pairs of lashing points, each with 400 kg lashing capacity, integrated in the outer frame. Drop-down and removable side panels made of aluminium. Loading height only 650 mm. Lighting according to Road Traffic Regulations (StVO), 13-pin electrical system. Accessories such as spare wheel, 100 km/h speed approval, winch, etc. are of course available at any time for an additional charge. Price plus shipping and registration documents

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 9.000 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, naslednji pregled (TÜV): 03/2023, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 6,1 m³, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, medosna razdalja: 990 mm, Leto izdelave: 2023, Oprema: nalagalnik, spojka prikolice, Flatbed High Loader Humbaur HBT 106224 BE Overall dimensions: 8290 x 2550 mm Loading height: 920 mm Central tube with screw coupling eye Ø 40 mm, galvanized throughout Crank infinitely height-adjustable Air brake with release valve, automatic load-dependent brake (ALB) Aluminum drop sides, 400 mm high Flooring made of 40 mm wooden planks Detachable corner stanchions front and rear Folding support legs, rear left and right Reinforced 25-ton gearbox support winch with load and fast mode Fixed side underrun protection One-piece loading ramps, hot-dip galvanized, 2400 mm long and approx. 520 mm wide, with galvanized steel grating surface 24 V lighting system with multi-chamber taillights Dedpfx Apoh I Ax Djwekp LED side marker lights 15-pin connector Connection hoses with red/yellow coupling heads

Stanje: novo, lastna masa: 1.700 kg, največja dovoljena obremenitev: 4.800 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215/75 r17,5 zoll, medosna razdalja: 850 mm, Leto izdelave: 2023, HUMBAUR Construction Machinery Tandem Low-Loader HS 654520 BS INCLUDES ALUMINIUM loading ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Specification: • Permissible total weight: 6,500 kg • Payload approx. 4,800 kg • Loading area approx. 4,500 x 2,000 mm • ALUMINIUM loading ramps • Continuously height-adjustable drawbar • Automatic jockey wheel • 6 pcs. 3 t lashing rings (in the corners) • 10 pcs. 2 t recessed lashing points in the outer frame • 2 adjustable support legs at the loading ramps • Dual-circuit air brake system with ABS • Steel mudguards • Platform floor made of softwood planks • Chassis frame hot-dip galvanized in an immersion bath • Tires: 215/75 R17.5 Your advantages: • Low loading and construction height • Optimum corrosion protection thanks to hot-dip galvanizing by immersion • Safe loading and unloading thanks to supports at the ramps • Simple and easy handling of the aluminium ramps • Ideal load securing options thanks to standard lashing points • The continuously height-adjustable drawbar enables compatibility with various towing vehicle coupling heights • Low tare weight, thus high payload capacity Dsdpshmm Rrsfx Apwokp => Freight costs for delivery: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and change.* *Price valid ex works D-86368 Gersthofen* *Sale to business customers only!*

Stanje: novo, lastna masa: 1.500 kg, največja dovoljena obremenitev: 3.500 kg, skupna masa: 5.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 215, medosna razdalja: 850 mm, Leto izdelave: 2023, Oprema: ABS, HUMBAUR Construction Equipment Tandem Low Loader HS 654020 BS INCLUDES ALUMINIUM Loading Ramps at Rear HOT-DIP GALVANIZED CHASSIS FRAME Equipment: • Permissible gross weight: 6,500 kg • Payload approx. 4,900 kg • Loading area approx. 4,000 x 2,000 mm • Loading ramps made of ALUMINIUM • Height-adjustable drawbar • Automatic jockey wheel • 4 units 3 t lashing rings (in the corners) • 10 recessed 2 t tie-down points in outer frame • Dual-circuit air brake system with ABS • Steel sheet mudguards Dsdpehmm Rvsfx Apwekp • Platform floor made from softwood planks • Chassis frame hot-dip galvanized by immersion bath • Tires 215/75 R17.5 Your benefits: • Low loading and construction height • Optimum corrosion protection through immersion hot-dip galvanization • Safe loading and unloading due to supports on the loading ramps • Simple and lightweight handling of the aluminium loading ramps • Ideal load securing options thanks to standard lashing points • Continuously height-adjustable drawbar enables compatibility with various coupling heights of towing vehicles • Low dead weight => thus, high payload

Stanje: novo, lastna masa: 380 kg, največja dovoljena obremenitev: 1.120 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.530 mm, vzmetenje: drugo, velikost pnevmatike: 13 zoll, Oprema: spojka prikolice, Motorcycle lowering trailer for 2 motorcycles, Single-axle, braked, payload 1118 kg, integrated 3-sided perforated railing, split anti-slip phenolic ply floor with central lashing rail, fully lowerable for easy loading. Single-stage hydraulic cylinder for manual operation. Optional accessories at extra cost: 100 km/h approval, electrohydraulic lowering also available with remote control. Dedpfx Apjg E Rtiewjkp