Humbaur Ht 2000 Tandemhänger Plane nakup rabljenega (6.174)

Stanje: novo, Three-way tipper with electric pump Manufacturer: Humbaur Model: HTK 3500.31 Internal dimensions: 3140 x 1750 x 350 mm (L x W x H) Permissible total weight: 3,500 kg Unladen weight: approx. 900 kg Payload: approx. 2,600 kg (payload may vary depending on equipment and configuration) Tyres: 13-inch Loading height: approx. 760 mm Electric hydraulic pump with remote control (cable), battery, and emergency hand pump Battery and hydraulic unit with cover Tipping angle rear and sides: approx. 45° Heavy-duty lever locks on all side panels Bolted V-drawbar with welded, hot-dip galvanized frame construction Chassis and tipping bridge hot-dip galvanized by immersion bath Heavy-duty one-piece steel tipping platform (completely wood-free) 4-stage tipping cylinder Rear pendulum tailgate 13-pin plug with reversing light 6 flush-mounted lashing points integrated in the bed, tensile force 800 kg per lashing ring Automatic jockey wheel Integrated ramp compartment for easy retrofitting of aluminium loading ramps Mud flaps Marker lights Incl. vehicle registration documents Available options and accessories for this trailer: Shock absorbers including 100 km/h certification 600 mm mesh side extension Additional 350 mm side wall extension 600 mm aluminium sheet side extension H-frame for transporting long materials Aluminium loading ramps, 2,800 kg capacity per pair Lredpfx Asy I Izredgsp Mesh hooks mounted on the side walls Load securing net Toolbox Spare wheel including holder Anti-theft device Registration of your new trailer at the vehicle licensing authority

Stanje: novo, Three-way tipper with electric pump and mesh extension Manufacturer: Humbaur Model: HTK 3500.31 Internal dimensions: 3140 x 1750 x 1350 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: approx. 900 kg Payload: approx. 2,600 kg (Payload may vary depending on equipment and configuration) Tyres: 13 inch Loading height: approx. 760 mm Mesh extension: 1,000 mm Lodpfx Ajy I Iynodgsrp Electric hydraulic pump with cable remote control, battery, and manual emergency pump Battery and hydraulic unit with cover Tip angle rear and side: approx. 45° Robust drop side catches at the side panels Bolted V-drawbar with welded frame construction, hot-dip galvanized Chassis and tipping platform hot-dip galvanized Heavy-duty steel tipper bed, one-piece construction (completely wood-free) 4-stage tipping cylinder Rear drop-down tailgate 13-pin connector with reversing light 6 flush mounted lashing points in the deck, tensile strength 800 kg per lashing ring Automatic jockey wheel Integrated ramp storage for easy retrofitting of aluminium loading ramps Mud flaps Outline marker lights Incl. vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h certificate 600 mm aluminium side extension H-frame for transporting long materials Aluminium loading ramps, 2,800 kg load capacity per pair Net hooks mounted on side panels Load securing net Toolbox Spare wheel incl. holder Anti-theft device Registration of your new trailer at the licensing authority

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Ponudba finančnega najema: trajanje 48 mesecev, polog samo DDV, preostala vrednost 40% mesečna rata 540,00 EUR (plačilo le neto znesek) Skupna masa: 24.000 kg / 30.000 kg Lrjdpfxswrv Sae Adgop Lastna masa: 6.300 kg Nosilnost: 17.700 kg / 23.700 kg Skupna dolžina: 10.900 mm Nakladalna dolžina: skupno 8.600 mm, 6.500 mm vključno z zadnjim naklonom, 2.100 mm višina krivine Širina: 2.550 mm Nakladalna višina: 900 mm Dodatne informacije - Močna varjena konstrukcija iz visoko trdnostnega finega zrnatega jekla - vroče pocinkano - zadnja podpora - dvojne pnevmatike 235/75R17,5 - opozorilne table - LED vzvratne luči - pritrdilne točke na zunanjem okviru - pritrdilne ušesce 4x krivine, 6x globoka ležišča (10000 daN) - enodelne vroče pocinkane nakladalne rampe (3100 mm x 750 mm) s 50 mm mehkim lesnim podom, bočno pomične - shrambna škatla v krivini - plastična orodjarna - zaščita pred naletom - 50 mm mehka lesena tla - zadnji plezalni letvi nakladalne rampe Vozilo ima enodnevno registracijo junija 2026.

Stanje: rabljeno, največja dovoljena obremenitev: 7.460 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2008, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna teža: 10.500 kg Lastna teža: 3.040 kg Nosilnost: 7.460 kg Skupna dolžina: 6.480 mm Dolžina nakladalne površine: 4.500 mm Lsdpjxnhm Eofx Adgorp Širina: skupna širina 2.550 mm / širina kesona 2.450 mm Višina nakladanja: cca 1.000 mm Dodatne informacije - Višinsko nastavljiva vlečna kljuka - 500 mm preklopne stranske stene - GFA osi

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading Platform Hydraulically Tippable with Hand Pump and Electric Pump Tip Angle: Rear 42°, Side 50° - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made from a single piece of steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - 350 mm high side walls made of aluminium, completely removable - Rear flap can be used as a swing tailgate - 6 lashing rings mounted on the bridge floor, each with an 800 kg tie-down capacity, DEKRA-certified - Jockey wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Silver side panels - Parabolic suspension Price includes vehicle registration certificate (Part II and COC documents) Lrodpfjwlabxox Adgsp We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Subject to technical changes, price adjustments, and errors. No liability for mistakes or printing errors. Features: Automatic reversing system, rubber suspension axle, independent wheel suspension, tilting loading area, jockey wheel, marker lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single piece of steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminium side walls, completely removable, rear flap can be used as a swing tailgate, 6 lashing rings on the bridge floor (800 kg capacity per ring, DEKRA-certified), plank compartment prepared for easy retrofit of aluminium ramps, silver side panels, parabolic suspension.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-way Tipper HTK Alu 3000.31 Permissible Total Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With sheet metal extension, 600 mm high, 4-way hinged Including flat tarpaulin - V-drawbar, hot-dip galvanized by immersion - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with electric pump and hand pump - 13-pin connector and reversing lights - Side panels made of aluminum, 350 mm high, completely removable - Rear flap pendulum mounted - 6 lashing rings mounted on the platform floor, lashing force 800 kg each, Dekra certified - Support wheel - Railing trough pre-equipped for quick retrofitting of aluminium ramps Price includes vehicle registration document (Part II registration certificate and COC papers). We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Technical specifications, prices, and information subject to change and errors excepted. No liability for errors or misprints. Lrsdpfx Aeyw Ez Uodgep Features: Automatic reversing, rubber torsion axle, independent suspension, tiltable bed, support wheel, marker lights, chassis and tipping body hot-dip galvanized by immersion, braked, includes warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side panels, completely removable, pendulum-mounted rear hatch, 6 lashing rings with 800 kg tensile force each, Dekra certified, ramp channel pre-equipped for easy retrofitting of aluminum ramps.

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tip angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipper bed, hot-dip galvanized - Tipper bed made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights Lrsdovtf Nfopfx Adgjp - Side panels made of aluminium, 350 mm high, fully removable - Rear tailgate with pendulum function - 6 lashing rings mounted on the bed floor, each with a lashing force of 800 kg, Dekra-certified - Support wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Black side panels - Parabolic suspension Price includes registration certificate (part II) and COC documentation We have a large range of trailers by the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate for carriage. We service and repair trailers of all manufacturers. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Reversing automatic, rubber suspension axle, independent suspension, tiltable platform, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper bed made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium removable side panels, pendulum-type rear tailgate, 6 lashing rings (800 kg each, Dekra-certified), preparation for aluminium ramps, black side panels, parabolic suspension.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, ++Availability upon request++ ++Delivery possible, freight charges upon request++ HTK 754020 Weights Technical gross vehicle weight: 7,500 kg Drawbar load: 500 kg Unladen weight: approx. 2,250 kg Payload with standard equipment: approx. 5,250 kg Dimensions Platform dimensions (L x W x H): approx. 4,000 x 2,030 x 400 mm Side wall height: approx. 400 mm Loading height (unladen): approx. 920 mm Drawbar length (free): approx. 1,900 mm Coupling height (unladen): approx. 560–840 mm Overall dimensions (L x W x H): approx. 6,070 x 2,200 x 1,450 mm Tyres: 4 x 215/75 R 17.5 Tip angle lateral/rear: 45° / 48° Oil requirement: 10 L V-value mechanical: 14.8 V-value pneumatic: 11.1 2 pairs of recessed folding lashing eyes per corner, 3,000 kg each 3 pairs of recessed lashing brackets along loading bed, 2,000 kg each -- Axles Axle units from renowned manufacturers; Suspension Maintenance-free parabolic suspension with load equalisation; Tyres Tyres according to manufacturer’s choice; Brake system ABS braking system according to ECE directive with ALB function; ABS connector ISO 7638; Spindle parking brake; 2x polarity safe coupling heads red/yellow ISO 1728; Electrics 24 V lighting system with multi-chamber rear lights and LED side marker lights; 15-pin plug connector for lights; Towing device Drawbar with 40 mm DIN screw towing eye, galvanised, Infinitely adjustable via crank; Chassis Robust, welded, hot-dip galvanised frame; Lockable recess for 2 optional loading ramps; Equipment Rigid side underrun protection installed from the start of the bed to the 1st axle; Mudguards with splash guards on front and rear axles; 2 wheel chocks with holder; Side and rear contour markings; Space for single-line license plate; Support Heavy-duty automatic jockey wheel; Hydraulics Three-way hydraulic tipper controlled via towing vehicle (max. 200 bar); Five-stage nitrided cylinder with stroke limitation and safety cables; Hydraulic quick coupling SVK BG3 as single-circuit connection; Platform Platform floor made of 4 mm steel plate; Reinforced, hot-dip galvanised platform frame; 4 ball cup bearings with 2 polarity safe tilt bearing bolts; Side Walls Laser-welded high-quality steel side walls, 400 mm high; Side walls foldable and removable; Rear flap foldable, removable, and swinging with central locking; Front wall made of steel, removable; Side walls primed and painted according to RAL (colour of your choice); +++ Without loading ramps => Optional at a surcharge of €1,590 net plus VAT 1 pair aluminium loading ramps incl. support feet at rear Length x width approx. 3,050 x 400 mm Load capacity approx. 4,390 kg/pair for a wheelbase of 1,500 mm Weight/piece: approx. 31 kg Ramp angle: approx. 16° Ledpfswk Efmex Adgjrp +++ +++ Side walls, loading bed, and chassis frame hot-dip galvanised by immersion bath (side walls hot-dip galvanised / not painted!) +++ -- All information subject to change -- Illustrations may differ --

Stanje: novo, lastna masa: 890 kg, največja dovoljena obremenitev: 1.570 kg, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.070 mm, širina tovornega prostora: 1.810 mm, višina nakladalnega prostora: 2.000 mm, prostornina tovornega prostora: 14,8 m³, barva: bela, gradbena višina: 2.665 mm, delovna širina: 2.318 mm, Manufacturer: Humbaur Type: Box Trailer Low Loader HK 254018-20P FlexZurr Perm. Gross Weight: 2,500 kg Payload: 1,610 kg Unladen Weight: 890 kg Box Dimensions: 4,060 x 1,770 x 2,000 mm Tyres: 15 inch Loading Height: 560 mm with double-wing doors - V-drawbar hot-dip galvanised - 13-pin plug and reversing lights - 15 mm thick floor plate - Side walls and roof made of 15 mm multiplex with UV-resistant plastic coating - Interior light fitted - Double-wing rear door with rod lock - Rod lock and hinges galvanised - 8 lashing rings in the frame profile, flexibly adjustable, lashing capacity 400 kg per ring, Dekra approved - Automatic jockey wheel - Humbaur multifunction lighting integrated in the underrun protection Price includes vehicle registration documents (registration certificate part II and COC papers) We carry a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical alterations, price changes and errors excepted. No liability accepted for errors or typographical mistakes. Reversing automatics, rubber suspension axle, independent wheel suspension, box body, jockey wheel, marker lights, rod lock and hinges galvanised, braked, incl. warranty, V-drawbar hot-dip galvanised, 13-pin plug and reversing lights, 18 mm thick floor plate, side walls and roof of 18 mm multiplex with UV-resistant plastic coating, interior light fitted, double-wing rear door with rod lock, 6 lashing rings in the frame profile, lashing capacity 400 kg per ring, Dekra approved Ljdpfx Ajrazmwodgjrp

Stanje: novo, lastna masa: 640 kg, največja dovoljena obremenitev: 1.360 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.040 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 2.000 mm, prostornina tovornega prostora: 9 m³, barva: bela, gradbena višina: 2.160 mm, delovna širina: 2.026 mm, Manufacturer: Humbaur Model: Box Trailer Low Loader HK 203015-20P FlexZurr Permissible Gross Weight: 2,000 kg Payload: 1,360 kg Unladen Weight: 640 kg Cargo Box Dimensions: 3,040 x 1,510 x 2,000 mm Tyres: 15-inch Loading Height: 550 mm - V-drawbar, immersion bath hot-dip galvanized - 13-pin plug and reversing light - 15 mm thick floor panel - Side walls and roof made of 15 mm thick multi-layer plywood with UV-resistant plastic coating - Interior light fitted Lodsqttzlspfx Adgorp - Double-wing door with rod lock - Rod lock and hinges galvanized - 6 infinitely adjustable lashing rings in the frame profile, lashing capacity 400 kg per ring, Dekra certified - Jockey wheel - Humbaur multifunction lighting integrated in underride protection Price includes vehicle registration certificate (Registration document Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide free temporary license plates for transfer. We repair trailers of all makes. Further accessories available on request. Technical modifications, price changes, and errors reserved. No liability for errors or misprints. Features: Automatic reversing mechanism, rubber suspension axle, independent wheel suspension, box body, jockey wheel, marker lights, rod lock and hinges galvanized, braked, including warranty, V-drawbar hot-dip galvanized by immersion, 13-pin plug and reversing light, 15 mm thick floor panel, side walls and roof made of 15 mm thick multilayer plywood with UV-resistant plastic coating, interior light installed, double-wing door with rod lock, 6 infinitely adjustable lashing rings in the frame profile, lashing capacity 400 kg per ring, Dekra certified.

Stanje: novo, lastna masa: 850 kg, največja dovoljena obremenitev: 1.840 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Side Tipper HTK Alu 2700.31 Ljdpforvgtvsx Adgerp Permissible total weight: 2700 kg Payload: 1850 kg Unladen weight: 850 kg Body dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 745 mm Loading platform hydraulically tiltable via hand pump Tipping angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized (immersion bath) - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight with additional electric pump - 13-pin plug and reversing light - Sidewalls made of powder-coated, galvanized steel, completely removable - Rear flap with swinging function - 6 lashing rings mounted on platform floor, each with 800 kg lashing capacity, Dekra tested - Support wheel - Slot for aluminium ramps pre-installed for easy retrofitting Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit (transfer) licence plate. We repair trailers of all makes. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Features: automatic reverse function, rubber-sprung axle, independent suspension, tiltable loading platform, support wheel, marker lights, galvanized steel sidewalls, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump–from 3000 kg permissible total weight with electric pump, 13-pin plug and reversing light, sidewalls powder-coated and fully removable, swinging rear flap, 6 lashing rings with 800 kg capacity each (Dekra certified), slot for aluminium ramps pre-installed for easy retrofitting.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Lsdperazlkefx Adgorp Gross Vehicle Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf mesh extension/steel mesh extension 600 mm high, swinging on all 4 sides - V-drawbar hot-dip galvanised - Chassis and tipping platform hot-dip galvanised by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; electric pump with hand pump from 3,000 kg gross weight - 13-pin connector and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear gate, pendulum mounted - 6 lashing rings fitted on platform floor, each ring tested by Dekra for a load capacity of 800 kg - Jockey wheel - Channel for ramps, pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration documents (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a complimentary transit/temporary licence plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes and errors excepted. No liability assumed for errors or misprints. Automatic reversing mechanism, rubber spring axle, independent wheel suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipping platform hot-dip galvanised by immersion, braked, includes warranty, V-drawbar hot-dip galvanised by immersion, one-piece steel construction tipping platform, 4-stage hard-chromed tipping cylinder, hand pump, electric pump with hand pump from 3,000 kg gross weight, 13-pin connector and reversing light, aluminium side panels 350 mm high, fully removable, rear gate pendulum mounted, 6 lashing rings on the platform floor (Dekra certified, 800 kg per ring), ramp channel pre-installed for easy retrofitting with aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: HTK Alu 3500.41 3-Way Tipper Gross Vehicle Weight: 3,500 kg Payload: 2,315 kg Unladen Weight: 1,185 kg Bed Dimensions: 4,100 x 2,100 x 350 mm Tyres: 13-inch Loading Height: 760 mm Load bed hydraulically tiltable with hand pump and electric pump Tipping angle: rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized via immersion bath - One-piece steel tipper platform - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with additional electric pump - 13-pin connector and reversing lights - 350 mm high aluminium drop sides, fully removable - Rear flap can swing - 8 lashing rings mounted on the platform floor, each with a pulling force of 800 kg, Dekra-tested - Jockey wheel - Plank box pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration document (registration certificate part II and COC papers). Ljdpfx Adjri Tawsgsrp We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer plates. We repair trailers of all manufacturers. Additional accessories available on request. Technical and price changes as well as errors excepted. No liability for errors or misprints. Features: auto-reverse braking system, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar fully hot-dip galvanized, one-piece steel tipper platform, 4-stage hard-chromed tipping cylinder, hand pump, additional electric pump from 3,000 kg GVW, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, rear swing flap, 8 lashing rings mounted on the platform floor, pulling force 800 kg per ring, Dekra-certified, plank box pre-installed for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized - Tipping platform made of steel, pressed from a single piece - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights Lodpfx Adeflw Sbsgorp - Aluminium drop sides, 350 mm high, fully removable - Rear tailgate, swinging - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, lastna masa: 300 kg, največja dovoljena obremenitev: 1.000 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 3.030 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.800 mm, prostornina tovornega prostora: 8,1 m³, barva: siv, gradbena višina: 2.400 mm, delovna širina: 2.004 mm, Manufacturer: Humbaur Model: Low-loader Trailer Alu HA 133015 Permissible total weight: 1300 kg Payload: 1000 kg Unladen weight: 300 kg Bed dimensions: 3030 x 1500 x 350 mm with grey tarpaulin and bows, 180 cm clear internal height Tyres: 15 inch Loading height: 585 mm with foldable front wall - V-drawbar, hot-dip galvanized - 13-pin connector - 15 mm strong floor panel - Side panels made of anodized aluminium - Drop gate(s) with recessed locks - 6 lashing rings integrated into the side walls, lashing capacity 400 kg per ring, Dekra certified - Humbaur multifunctional lighting integrated in underrun protection with tarpaulin and bows, 180 cm clear internal height, Made in Germany Only high-quality truck tarpaulin (680 g/m) is used. Tarpaulin colour can be chosen freely (we are happy to send you a colour chart by email on request). Special sizes and configurations available upon request at any time. Lettering available in stencil screen-print or digital print. We would be happy to provide you with an individual offer. Price includes vehicle registration document (registration certificate part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun Free transit number plate available on request. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price modifications and errors reserved. No liability for errors or typographical mistakes. Automatic reversing system, rubber suspension axle, independent wheel suspension, high tarpaulin, jockey wheel, marker lights, V-drawbar hot-dip galvanized, braked, incl. warranty, 13-pin connector, 15 mm strong floor panel, side panels made of double-walled anodized aluminium profile, drop gate(s) with recessed locks, 6 lashing rings integrated into the side panels, lashing capacity 400 kg per ring, Dekra certified. Lrodpfxjd T Spvs Adgep

Stanje: novo, lastna masa: 1.140 kg, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Gross Vehicle Weight: 3,500 kg Axles: Tridem Payload: 2,360 kg Unladen Weight: 1,140 kg Body Dimension: 4,100 x 2,100 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear 45°, side 45° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made from single-piece steel - 4-stage hard-chrome-plated tipping cylinder - Hand pump, from 3,000 kg gross weight with additional electric pump - 13-pin plug and reverse lights Lreded T Svtjpfx Adgsp - Drop sides made of aluminium, 350 mm high, fully removable - Rear flap is swing-type - Eight lashing rings fitted on the platform, each with 800 kg load capacity, Dekra-tested - Jockey wheel - Ramp tray prepped for easy retrofit of aluminium ramps Price includes vehicle registration document (part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request we can provide a free transfer number plate. We repair trailers from all manufacturers. Additional accessories on request. Subject to technical modifications, price changes, and errors. No liability for typing or printing errors. Reverse automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar, hot-dip galvanized, tipper platform made from single-piece steel, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm, fully removable, swing-type rear flap, 8 lashing rings on the platform, 800 kg per lashing ring, Dekra tested, ramp tray prepped for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 550 kg, največja dovoljena obremenitev: 1.950 kg, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.100 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,4 m³, barva: modra, gradbena višina: 2.650 mm, delovna širina: 1.913 mm, Manufacturer: Humbaur Model: Hochlader HN 253115 Gross Vehicle Weight: 2,500 kg Ledpfer Einaox Adgerp Payload: 1,950 kg Unladen Weight: 550 kg Box Dimensions: 3,100 x 1,850 x 350 mm with blue tarpaulin and 200 cm (clear height) hoop frame Tyres: 10 inch Loading height: 610 mm incl. 100 km/h approval - V-drawbar, fully hot-dip galvanised - 13-pin plug and reversing light - 18 mm thick floor panel - Side walls made of anodised aluminium with recessed locks, fully removable - Lashing rings integrated in V-external frame profile, load capacity 400 kg per ring, Dekra certified - 6 lashing eyes - Jockey wheel - Humbaur multifunction lighting integrated in underrun protection Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free transit license plate. We repair trailers of all manufacturers. Further accessories available on request. Technical modifications, price changes and errors excepted. No liability for errors or typographical mistakes. Features: automatic reversing system, rubber sprung axle, independent suspension, high tarpaulin, jockey wheel, marker lights, V-drawbar hot-dip galvanised, braked, incl. warranty, 13-pin plug and reversing light, 18 mm thick floor panel, side walls made of anodised aluminium with recessed locks (fully removable), lashing rings integrated in V-external frame profile (load capacity 400 kg per ring, Dekra tested), 6 lashing eyes.

Stanje: novo, lastna masa: 300 kg, največja dovoljena obremenitev: 1.000 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.310 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,3 m³, barva: črn, gradbena višina: 905 mm, delovna širina: 1.810 mm, Manufacturer: Humbaur Model: Low-loader Alu HA 132513 Permissible total weight: 1300 kg Payload: 1000 kg Unladen weight: 300 kg Bed dimensions: 2510 x 1310 x 350 mm Lrodpfewk U Uksx Adgjp With black PCC tarpaulin and 160 cm headroom bow Tyres: 14" Loading height: 530 mm With folding front panel 100 km/h approval included With tarpaulin and bow, 160 cm internal height, Made in Germany Only high-quality truck tarpaulin is used (680 g/m²). The tarpaulin color can be freely chosen (upon request we will gladly send you a color chart by email). Special dimensions and versions can be offered at any time. Lettering available as stencil, screen, or digital print. We are happy to prepare an individual offer for you. - V-drawbar hot-dip galvanized - 13-pin plug - Floor panel 15 mm thick - Side panels made of anodized aluminum - Drop-down front panel(s) with recessed latches - 6 lashing rings integrated into the side panels, lashing capacity 400 kg per ring, Dekra tested - Humbaur multifunction lighting integrated into underrun protection HA low-loaders from Humbaur feature a unique frame/sidewall design made from stable, anodized aluminum. The multi-layer, water-resistant special plywood floor with a non-slip phenolic resin coating and 15 mm thickness is ready for any application. Thanks to the outstanding construction, where the floor is slid into the sidewalls, it is easily replaceable in case of damage. The high-quality materials, such as the hot-dip galvanized drawbars, and careful workmanship make this a reliable and durable transport solution. Whether for transporting motorcycles, bicycles or garden equipment, its wide range of accessories makes it highly versatile. Our HA model will impress you with its multifunctionality. Price includes registration documents (vehicle registration Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Free temporary license plate on request. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes, and errors excepted. No liability for mistakes or misprints. Features: Automatic reversing system, rubber suspension axle, independent wheel suspension, high tarpaulin, jockey wheel, marker lights, V-drawbar hot-dip galvanized, braked, warranty included, 13-pin plug, 15 mm thick floor panel, side panels made from anodized double-walled aluminum profile, front panel(s) with recessed latches, 6 lashing rings integrated into the sidewalls, lashing capacity 400 kg per ring, Dekra tested, incl. 100 km/h approval.

Stanje: novo, lastna masa: 640 kg, največja dovoljena obremenitev: 1.860 kg, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.040 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 2.000 mm, prostornina tovornega prostora: 9 m³, barva: bela, gradbena višina: 2.160 mm, delovna širina: 2.026 mm, Manufacturer: Humbaur Model: Box Trailer Low Loader HK 253015-20P FlexZurr Gross vehicle weight: 2500 kg Payload: 1860 kg Unladen weight: 640 kg Internal dimensions: 3040 x 1510 x 2000 mm Tyres: 15 inch Loading height: 550 mm - V-drawbar, fully hot-dip galvanized - 13-pin plug and reversing light - 15 mm thick floor panel - Side walls and roof made of 15 mm thick multi-layer plywood with UV-resistant plastic coating - Interior light installed - Double-wing rear door with locking rod system - Galvanized locking rod mechanism and hinges - 6 lashing rings, infinitely adjustable within the frame profile, lashing capacity 400 kg per ring, Dekra-tested - Jockey wheel - Humbaur multifunction lighting integrated into the underrun protection Lodpfx Adjrq Exmogsrp Price includes vehicle registration certificate (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. On request, we provide a free temporary license plate. We repair trailers of all manufacturers. Further accessories available on request. Technical modifications, price changes and errors excepted. We assume no liability for errors or misprints. Reversing automatic brake, rubber spring axle, independent wheel suspension, box body, jockey wheel, marker lights, galvanized locking rod system and hinges, braked, including warranty, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, 15 mm thick floor, side walls and roof made of 15 mm thick multi-layer plywood with UV-resistant plastic coating, interior light fitted, double-wing door with locking rod system, 6 lashing rings, infinitely adjustable within the frame profile, lashing capacity 400 kg per ring, Dekra-tested.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Lredsvtf I Uepfx Adgjp Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyre Size: 13 inch Loading Height: 740 mm Loading platform can be hydraulically tipped with hand pump and electric pump Tipping angle: rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge, fully hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear flap is swing- and drop-type - 6 lashing rings mounted on the platform floor, tensile force 800 kg per ring, Dekra approved - Jockey wheel - Shaft for installing aluminum ramps, pre-equipped for easy retrofitting - Black side walls Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. A free transfer license plate is available upon request. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices and availability subject to change. No liability for errors or misprints. Features: automatic reverse, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side walls, fully removable, swing-type rear flap, 6 lashing rings on the platform floor (800 kg tensile force each, Dekra approved), shaft pre-installed for retrofitting aluminum ramps, black side walls.

Stanje: novo, lastna masa: 560 kg, največja dovoljena obremenitev: 1.850 kg, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,1 m³, barva: siv, gradbena višina: 1.000 mm, delovna širina: 1.913 mm, Manufacturer: Humbaur Model: High Loader HN 254118 Permitted Total Weight: 2,500 kg Payload: 1,850 kg Unladen Weight: 650 kg Bed Dimensions: 4,100 x 1,850 x 350 mm Tyres: 10 inch Lrjdpfx Aod T Sqhjdgjp Loading Height: 610 mm Fitted with light grey tarpaulin and bows (clear internal height 200 cm) Only high-quality truck tarpaulin (680 g/m²) is used. Tarpaulin colour is freely selectable (upon request, we will gladly email you a colour chart). Special dimensions and custom designs can be offered at any time. Lettering available in stencil screen-print or digital print. We are happy to provide you with an individual offer. - V-drawbar, immersion bath hot-dip galvanised - 13-pin plug and reversing lights - 18 mm thick floor panel - Drop sides made of anodised aluminium with flush-mounted latches, fully removable - Lash rings integrated into the V-exterior frame profile, tensile force 400 kg per ring, DEKRA tested - 8 lashing eyes - Jockey wheel - Humbaur multifunctional lighting integrated into underrun guard Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide free temporary licence plates for transportation. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for mistakes or printing errors. Reversing automatic, rubber suspension axle, independent suspension, high tarpaulin, jockey wheel, marker lights, V-drawbar immersion bath hot-dip galvanised, braked, incl. warranty, 13-pin plug and reversing lights, 18 mm thick floor, drop sides in anodised aluminium with flush-mounted latches, fully removable, lash rings in V-exterior frame profile, tensile force 400 kg per ring, DEKRA tested, 8 lashing eyes.

Stanje: novo, lastna masa: 300 kg, največja dovoljena obremenitev: 1.000 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.310 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,3 m³, barva: rdeča, gradbena višina: 905 mm, delovna širina: 1.810 mm, Manufacturer: Humbaur Model: Low bed trailer Alu HA 132513 Perm. total weight: 1,300 kg Payload: 1,000 kg Unladen weight: 300 kg Bed size: 2,510 x 1,310 x 350 mm with red PCC tarpaulin and 160 cm high frame Internal clearance height Tyres: 14 inch Loading height: 530 mm with folding front panel incl. 100 km/h road approval Supplied with tarpaulin and frame, 160 cm internal clearance height, Made in Germany. Only high-quality truck tarpaulin is used (680 g/m²). The tarpaulin color is freely selectable (we will gladly email you a color chart upon request). Special sizes and configurations available on request at any time. Lettering available in stencil screen print or digital print. We will gladly provide you with an individual offer. - V-drawbar, fully hot-dip galvanized - 13-pin plug - 15 mm thick floor plate - Drop sides made of anodized aluminum - Flap(s) with recessed locks - 6 lashing rings integrated into the side walls, lashing force 400 kg per ring, Dekra tested - Humbaur multifunctional lighting integrated into underrun protection Humbaur's HA tandem low bed trailers feature a unique frame and sidewall construction in stable, anodized aluminum. The multi-layered, waterproof bonded special wooden floor with anti-slip phenolic resin coating and 15 mm thickness is ready for any application. Thanks to the outstanding design, the floor is slotted into the sidewalls, making it easy to replace in case of damage. High-quality materials, such as the fully hot-dip galvanized drawbars, and meticulous workmanship make it a reliable and durable transport assistant. Whether for transporting motorcycles, bicycles, or garden tools, its wide range of accessories makes it extremely versatile. Our HA model will impress you with its multifunctionality. Price includes vehicle registration certificate (Part II registration documentation and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we provide free temporary transit license plates. We repair trailers from all manufacturers. Additional accessories available upon request. Technical changes, price alterations, and errors excepted. No liability for errors or misprints. Features: Automatic reverse function, rubber torsion axle, independent wheel suspension, high tarpaulin, jockey wheel, marker lights, V-drawbar fully hot-dip galvanized, braked, including warranty, 13-pin connector, 15 mm thick base plate, drop sides made of anodized double-walled aluminum profile, flap(s) with recessed locks, 6 lashing rings integrated into the sidewalls, 400 kg pull resistance per ring, Dekra certified, incl. 100 km/h road approval. Lrjdjwk U Uqspfx Adgep

Stanje: novo, lastna masa: 300 kg, največja dovoljena obremenitev: 1.000 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.310 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,3 m³, barva: modra, gradbena višina: 905 mm, delovna širina: 1.810 mm, Manufacturer: Humbaur Model: Low-loader Alu HA 132513 Permissible total weight: 1300 kg Payload: 1000 kg Unladen weight: 300 kg Internal dimensions: 2510 x 1310 x 350 mm Equipped with blue premium tarpaulin (PCC) and 160 cm high removable frame (clearance height). Tyres: 14 inch. Loading height: 530 mm. Features: - Folding front panel - Premium truck tarpaulin used exclusively (680 g/m²) - Tarpaulin colour freely selectable (colour chart available by email upon request) - Custom sizes and designs available on request - Stencil, screen print, or digital lettering available - We are happy to prepare an individual quote for you Technical Specifications: - V-drawbar, hot-dip galvanised in immersion process - 13-pin plug - 15 mm thick floor panel Lredpfx Aewk U Spsdgep - Side walls in anodised aluminium - Tailboard(s) with recessed locks - 6 integrated lashing rings in the side walls, each tested for 400 kg tensile force (Dekra certified) - Humbaur multifunctional lighting integrated in underride guard Construction: HA low-loader trailers from Humbaur feature a unique frame and side wall design made from robust, anodised aluminium. The specialty wooden floor (multiple water-resistant bonded layers, 15 mm thick) with slip-resistant phenolic resin coating is suitable for all applications. The floor panel is slid into the side walls, making it easy to replace if damaged. High-quality materials, such as hot-dip galvanised drawbars, and precise craftsmanship make this trailer a reliable long-term transport solution. Applications: Ideal for transporting motorcycles, bicycles, gardening equipment, and more. Wide range of accessories makes this model highly versatile. Our HA model will impress you with its multifunctionality. Price includes vehicle registration papers (Registration Certificate Part II and COC documents). We stock a large selection of trailers from the following manufacturers: - Brenderup - Humbaur - Hapert - Brian James Trailers - Unsinn - Neptun Free transfer license plate available upon request. We repair trailers of all manufacturers. Additional accessories on request. Technical specifications, prices, and availability subject to change. No liability for errors or typographical mistakes. Equipment highlights: reversing automatic, rubber suspension axle, independent suspension, high tarpaulin, jockey wheel, marker lights, V-drawbar hot-dip galvanised, braked, including warranty, 13-pin plug, 15 mm thick floor panel, side panels in double-walled anodised aluminium profile, tailboard(s) with recessed locks, 6 integrated lashing rings tested at 400 kg per lashing ring (Dekra certified).

Stanje: novo, lastna masa: 300 kg, največja dovoljena obremenitev: 1.000 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.310 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,3 m³, barva: siv, gradbena višina: 905 mm, delovna širina: 1.810 mm, Manufacturer: Humbaur Model: Low Loader Alu HA 132513 Gross Vehicle Weight: 1300 kg Payload: 1000 kg Unladen Weight: 300 kg Internal Dimensions: 2510 x 1310 x 350 mm with PCC grey tarpaulin and 160 cm high tarpaulin frame, clear inside height Tyres: 14 inch Loading Height: 530 mm with folding front wall includes 100 km/h approval with tarpaulin and frame (160 cm clear height), Made in Germany Lredpfxjwk U Tgj Adgop Only high-quality truck tarpaulins are used (680 g/m²). The tarpaulin colour can be chosen freely (colour chart available on request by email). Custom dimensions and versions available at any time. Lettering available in stencil, screen or digital print. We are happy to provide you with a tailored quote. - V-drawbar, fully hot-dip galvanized - 13-pin connector - 15 mm thick floor panel - Drop sides made of anodized aluminum - Tailgate(s) with recessed locks - 6 lashing rings integrated into side walls, lashing capacity 400 kg per ring, DEKRA approved - Humbaur multifunctional lighting integrated into underrun protection Humbaur’s HA low loader trailers feature a unique frame and side wall construction made from robust, anodized aluminum. The specially laminated, water-resistant wooden floor, 15 mm thick with anti-slip phenolic resin coating, is suitable for any application. Thanks to the outstanding design—where the floor panel slides into the side walls—it can be easily replaced if damaged. High-quality materials, such as fully hot-dip galvanized drawbars, and precise workmanship make this trailer a reliable and long-lasting transport solution. Whether for transporting motorcycles, bicycles or garden equipment, its wide range of accessories makes it highly versatile. Our HA model will impress you with its multifunctionality. Price includes vehicle registration certificate (Part II) and COC papers. We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we will provide a free transit license plate. We repair trailers of all brands. Further accessories available on request. Technical changes, price changes and errors reserved. No liability for mistakes or misprints. Reverse automatic, rubber suspension axle, independent suspension, high tarpaulin, jockey wheel, marker lights, V-drawbar hot-dip galvanized, braked, including warranty, 13-pin connector, 15 mm floor panel, anodized double-walled aluminum drop sides, tailgate(s) with recessed locks, 6 lashing rings integrated into side walls, lashing capacity 400 kg per lashing ring, DEKRA approved, including 100 km/h approval.

Stanje: novo, lastna masa: 300 kg, največja dovoljena obremenitev: 1.000 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.310 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,3 m³, barva: oranžna, gradbena višina: 905 mm, delovna širina: 1.810 mm, Manufacturer: Humbaur Model: Low Loader Alu HA 132513 GVWR: 1,300 kg Payload: 1,000 kg Unladen Weight: 300 kg Bed Dimensions: 2,510 x 1,310 x 350 mm with orange tarpaulin (PCC) and 160 cm high bows Internal Height: 160 cm under the tarpaulin Tyres: 14 inch Loading Height: 530 mm with folding front wall Incl. 100 km/h type approval Supplied with tarpaulin and bows, 160 cm internal height Made in Germany Only high-quality truck tarpaulin (680 g/m²) is used. The tarpaulin color is freely selectable (upon request, we will gladly send you a color chart by email). Special dimensions and custom designs available any time. Lettering available in stencil screen-printing or digital printing. We are happy to provide you with a tailored offer. - V-drawbar hot-dip galvanized - 13-pin plug - 15 mm thick floor plate - Side panels made of anodized aluminum - Flap(s) with recessed locks - Tie-down rings: 6 pieces integrated into the side rails, lashing capacity 400 kg per ring, Dekra tested - Humbaur multifunction lighting integrated into underrun protection HA low loaders by Humbaur feature a unique frame and sidewall construction made from robust, anodized aluminum. The multi-layer, water-resistant special plywood floor has a slip-resistant phenolic resin coating and 15 mm thickness, making it suitable for all applications. Thanks to the outstanding design—where the floor slides into the sidewalls—it is easy to replace in case of damage. The use of high-quality materials, such as hot-dip galvanized drawbars, and careful workmanship make it a reliable and durable transport solution. Whether for transporting motorcycles, bicycles, or garden equipment, its wide range of accessories makes it highly versatile. Our HA model will impress you with its multifunctionality. Lredpfewk U U Dex Adgep Price includes vehicle registration certificate (Part II and COC papers) We stock a large range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free temporary registration plates. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price alterations, and errors excepted. No liability for errors or typographical mistakes. Features: automatic reversing system, rubber suspension axle, independent wheel suspension, high cover, jockey wheel, marker lights, V-drawbar hot-dip galvanized, braked, incl. warranty, 13-pin plug, 15 mm thick floor plate, sidewalls made from anodized double-wall aluminum profiles, flap(s) with recessed locks, 6 tie-down rings integrated in side walls (400 kg lashing capacity per ring, Dekra tested), incl. 100 km/h approval.