Stas Agrostar 47,6 Cbm nakup rabljenega (6.086)

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection Isdsfi Nmwjpfx Aicsth

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2013, dolžina tovornega prostora: 8.400 mm, širina tovornega prostora: 2.390 mm, višina nakladalnega prostora: 1.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 1.310 mm, Leto izdelave: 2013, Dimenzija pnevmatike: 385/65R22,5 Vzmetenje: zračno vzmetenje Pogon: kolo Lastna teža: 5.590 kg Ijdpjwzkx Tofx Aicsth Nosilnost: 33.410 kg Skupna dovoljena masa: 39.000 kg Znamka nadgradnje: STAS Kiper: zadaj

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 40 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle lift with traction aid and electric operation, raise & lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" king pin bolted into a 10mm plate, mechanical landing gear with single-side operation, braking system per EEC standard, Westinghouse two-line system, spring brakes on two axles and EBS electronic system Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per StVZO with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, Edbro hydraulic system with approx. 2m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on the tailgate, prepared for vibrating plate, mud-tight! ADDITIONAL EQUIPMENT AVAILABLE TO ORDER AS REQUESTED COLOR FREELY CHOOSABLE +590€ delivery costs Isdpeu Dvw Esfx Aicoth *Pictures and offers non-binding*

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Iedefi Nmpopfx Aiceth Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Ijdpfxsgcw Ris Aicsth Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: novo, največja dovoljena obremenitev: 28.840 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.660 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 2.350 mm, prostornina tovornega prostora: 50 m³, Oprema: ABS, STRONG & LIGHT, now also available for heavy-duty applications, from 40 m³ loading volume and 6,600 kg. High-quality aluminium chassis with high-strength steel body, ACTUAL 7,160 KG. Chassis with 3x 9t DCA axles, equipped with 430 mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting aid, aluminium drop-down landing legs (can be decoupled when loaded), foldable underrun protection, digital load gauge for axle load indication, toolbox, access ladder. Body made from HB450 steel sheets, floor 5 mm thick, side walls and rear doors made from 4 mm HB450 steel sheets. Rear doors split 1/2 - 1/2 with a grain chute on the right, rear doors can be unlocked from the rear, doors sealed with round steel bar (optionally with rubber seal – mud-tight), roll tarp with central support tube, aluminium splash guard to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long casing, loading height = 3,650 mm. (The vehicles shown are partly equipped with special options) Iedpfx Aijhfiqcocoth Further equipment details and a comprehensive vehicle quotation are available upon request. Various loading volumes, vehicle lengths, and heights are possible. Painting and equipment according to customer specifications. +€500 delivery charge Offers and images are subject to change.

Stanje: rabljeno, številka stroja/vozila: YE6SZ339V600R0459, konfiguracija osi: 3 osi, prva registracija: 07/2006, dolžina tovornega prostora: 13.350 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.750 mm, skupna dolžina: 13.950 mm, skupna širina: 2.500 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2006, Oprema: ABS, = Más opciones y accesorios = - Hidráulica = Notas = Chasis Altura del chasis: 100 cm Altura del perno de acoplamiento / barra de tiro: 120 cm Estructura Hidráulica: ✓ Depósito Combustible: ✓ = Más información = Configuración de ejes Tamaño de neumáticos: 385/65 R22.5 Marca de ejes: Mercedes Frenos: Frenos de disco Suspensión: Suspensión neumática Eje 1: Perfil neumático izquierdo: 65%; perfil derecho: 10% Eje 2: Perfil neumático izquierdo: 75%; perfil derecho: 15% Isdpfxeyq R Ryj Aicoth Eje 3: Perfil neumático izquierdo: 70%; perfil derecho: 15% Pesos Peso en vacío: 7.960 kg Carga útil: 31.040 kg Peso bruto: 39.000 kg Funcional Carrocería: Stas Altura de la plataforma de carga: 110 cm Identificación Matrícula: QAZ297 = Información de la empresa = Para más información sobre esta unidad, por favor llame o envíe un correo electrónico a: . Puede consultar el inventario completo en: . No olvide suscribirse a nuestro boletín para recibir actualizaciones semanales sobre nuestro stock.

Stanje: rabljeno, lastna masa: 11.245 kg, skupna masa: 36.000 kg, Leto izdelave: 2009, Oprema: ABS, STAS/ALU/TIPPER Year of manufacture: 10/2009 2 axles Gross weight: 36,000 kg Unladen weight: 11,245 kg Itedevdrt Sopfx Aiceh ABS

Stanje: rabljeno, lastna masa: 6.440 kg, največja dovoljena obremenitev: 27.560 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 57 m³, vzmetenje: zrak, barva: srebrn, Leto izdelave: 2025, prevoženi kilometri: 153.649 km, vrsta prenosa: mehanski, Oprema: ABS, Lastna teža: 6440 kg, dovoljena skupna masa: 34000 kg, tovorni prostor (D Š V): 10.500 mm x 2.470 mm x 2.200 mm, volumen tovornega prostora: 57 m³, zračno vzmetenje, dvižna os: 3. os prisilno vodena, elektronski zavorni sistem EBS, dirigirana sledilna os, nihajna loputa, mulda odporna na blato, strešna ponjava z navijanjem, podest, anti-spray zaščita, lahka aluminijasta platišča: ALCOA, prikazovalnik osne obremenitve, sistem za cerado, Trailer Info modul, SAF osi, pnevmatike 385/65R22,5, izvedba za palete, L10500 Š2470 V2200 57m3, žitni drsnik, višina sedla 1200, VAVKSK339PH518676, prodaja v komisiji, nezavezujoča ponudba, pridržujemo si pravico do napak in vmesne prodaje. Slika ni nujno skladna s ponudbo. Itjdpfszcruksx Aiceh

Stanje: rabljeno, največja dovoljena obremenitev: 31.420 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2027, prostornina tovornega prostora: 32 m³, skupna širina: 2.550 mm, skupna višina: 3.750 mm, Leto izdelave: 2023, Oprema: ABS, 3-axle KÄSSBOHRER foodstuff pressure tank, 3 compartments, 32,000 liters with diesel heating and UNIBLOCK pump First registration: 01/2023, as-new condition Iedsp R Drgopfx Aicjth Fifth wheel height approx. 1,180 mm Unladen weight approx. 7,580 kg VA tank AISI 304 3 compartments: 12,500 / 7,500 / 12,000 liters 100 mm glass wool insulation, outer cladding stainless steel mirror finish, end walls GRP Pneumatic bottom valves DN80 3 individual outlets, insulated, ending in the rear cabinet with 3-in-1 collector UNIBLOCK food-grade pump type 551M2 stainless steel, electric motor 7.5 kW, with frequency converter Tank diameter 2,000 mm Test overpressure 3.0 bar Operating pressure 2.0 bar 3x manhole covers DN 500 with overflow box Stainless steel cleaning/air pipe DN50 with microfilter Diesel tank heating EBERSÄCHER Hydronic 30 kW Stainless steel hose tubes left and right, approx. 6 meters long Chassis: stainless steel BPW axles with large disc brakes, 430 mm 1st axle as lift axle KNORR Trailer EBS with stability program (RSS) Air tanks: aluminium Tyres: 6 x 385/65 R 22.5 BRIDGESTONE Alloy rims RENTING is the new BUYING – now also available from us as a full-service rental, immediately available-----

Stanje: rabljeno, največja dovoljena obremenitev: 31.240 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2023, naslednji pregled (TÜV): 03/2027, skupna širina: 2.550 mm, skupna višina: 3.800 mm, Leto izdelave: 2023, Oprema: ABS, LANGENDORF/ FTS 3-Axle Aluminium Tipper "Combiliner" First registration: 03/2023, one owner Mileage: only 114,761 km The transport solution for interchangeable haulage of both liquid and solid goods without requiring conversion. The module can be removed at any time. System advantages: Iedey Iq Injpfx Aicjth - Avoidance of empty runs thanks to swap body transport. Can be converted seasonally to a standard tipper for higher payload. Provides both economic and environmental benefits. - Module is integrated into the tailgate, so tipper remains fully operational without restrictions. - Rinsing function - Vehicle complies with QS and GMP+ standards, TUV Süd certified - Unladen weight approx. 7,760 kg - Tipper volume: 47.5 m³ - Slurry bag volume: 26.5 m³ - Pneumatic vibrator - Grain outlet in the floor, grain duct with dust-protection bag - 50 L aluminium water tank with compressed air connection, hose reel, and hand shower (QS and GMP compliant) SAF axles, reinforced "CD" version with large 430 mm disc brakes 1st axle is a LIFT AXLE WABCO trailer EBS with anti-skid RSS WABCO Optiturn for reduced turning circle WABCO Smartboard with axle load display Six 385/65 R 22.5 tyres SPEEDLINE high-polished aluminium rims FTS Combiliner Module equipment: - Vogelsang rotary lobe pump GL 186-184Q, weight-optimized - 4" and 6" spade slide valves - Operation via remote control and programmable sequences - Manual control unit on top for all hydraulic functions - Two-tank venting/degasification and overflow - Rinsing function via two flange connections (left/right rinsing) - Rinse baffle plates in the wire baskets - Powered reel with motor and hydraulic brake RENTING is the new BUYING, available immediately also with FULL-SERVICE RENTAL!

Stanje: rabljeno, največja dovoljena obremenitev: 33.820 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.315 mm, Leto izdelave: 2025, Oprema: ABS, GRANALU All-Aluminum 3-Axle Tipper Body 30 cbm First registration: March 2025 Mileage: only 54,008 km Internal dimensions (LxWxH): 8,000 x 2,340 x 1,600 mm Loading height: only 3,315 mm Perm. gross weight (technical): 39,000 kg Unladen weight: 5,180 kg JOST axles with large disc brakes, 430 mm Itsdpfoyzlr Uox Aiceh 1st axle is a LIFT AXLE with off-road start assist WABCO trailer EBS with rollover stability system (RSS) Tyre pressure monitoring system WABCO TPMS Aluminum air tanks FULL LED lighting ALU-LEG retractable landing legs, full-load rated HYVA tipping cylinder, type Alpha, suitable for both high and low pressure Body floor: continuous 8 mm high-wear-resistant HERKAL aluminum Side walls: 6 mm high-wear-resistant aluminum profiles with insulating air chambers, tapering to 3 mm toward the top rail. Additionally, 4 mm pointed wear plates at the rear approx. 2,000 x 700 mm, also made of HERKAL aluminum Inclined front wall made of 5 mm aluminum Overlapping pendulum-type rear gate, double-joint mounted with two latches underneath and all-around rubber seal Roll-over roof tarp with central locking RENTING is the new BUYING—available now as a full-service rental from us-----

Stanje: rabljeno, največja dovoljena obremenitev: 33.450 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2027, prostornina tovornega prostora: 28 m³, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Leto izdelave: 2024, Oprema: ABS, 3-osna cisterna polpriklopnik KÄSSBOHRER tip STC 28/1-10/24 Prva registracija 04/2024, nemški polpriklopnik iz prve roke Prevoženih le 52.629 km Cisterna iz nerjavečega jekla V2A Izolacija 100 mm Prostornina 28 m³, z 2 pregradami proti valovanju Praznjenje skozi izpust s ploščnim ventilom, izhod v zadnji omari 1x polnilni/dostopni pokrov DN 500 Kratek aluminijasti podvozje Wabco Trailer-EBS z RSS zaščito proti zdrsu Isdpfx Aozbwy Neicoth BPW osi z disk zavorami Pnevmatike 6 x 385/65 R 22,5, globina profila 10 do 12 mm Svetleče aluminijasta platišča 1. in 3. os - dvižna os Dostopna lestev na desni strani cisterne Z APOLLO črpalko tip Magnum L, samosesalna centrifugalna črpalka 3'' v zadnji omari Prost spust priključek NAJEM je nova KUPNJA, pri nas tudi s polno servisno najemom TAKOJ na voljo-----

Stanje: rabljeno, prevoženi kilometri: 732.200 km, moč: 315 kW (428,28 KM), prva registracija: 03/2014, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 5, skupna širina: 2.550 mm, skupna višina: 3.950 mm, Oprema: ABS, filter saj, klimatska naprava, parkirni grelec, Listnato vzmetenje, VEB, prikaz zunanje temperature, zapora diferenciala, kolutna zavora, senčnik, zračni sedež, ogrevana zunanja ogledala, električna zunanja ogledala, tahograf, pomožni pogon, zaščita proti podvozu, dvojna montaža pnevmatik, rabljeno vozilo Isdjy N H Sfepfx Aicjth Št. vozila 3350, ABS, TC, kabina FH z 1 x posteljo, strešno okno, parkirno gretje, samodejna klima, rotacijska luč, pnevmatike: 315/80 R22,5, listnato vzmetenje spredaj + zadaj, EURO 5, ročni menjalnik, VEB, pogon 8x4, medosna razdalja: 5.100 mm, Spitzer silos nadgradnja 23 m³, kompresor GHH Rand, prazna teža: 12.860 kg, dovoljena skupna masa: 32.000 kg, ob povpraševanju prosimo navedite, napake in vmesna prodaja pridržane.

Stanje: rabljeno, prevoženi kilometri: 899.956 km, moč: 315 kW (428,28 KM), prva registracija: 04/2012, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 09/2026, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 5, skupna širina: 2.550 mm, skupna višina: 3.990 mm, Oprema: ABS, filter saj, klimatska naprava, parkirni grelec, Listnato vzmetenje, VEB, prikaz zunanje temperature, diferencialna zapora, kolutne zavore, senčnik, strešno okno, pnevmatski sedež, ogrevani zunanji ogledali, električni zunanji ogledali, indikator obrabe zavornih oblog, tahograf, stranski pogon, zaščita proti podletu, dvojna montaža pnevmatik, rabljeno vozilo. Ijdey Ng Igjpfx Aiceth Št. vozila: 3354, ABS, TC, kabina z 1 ležiščem, strešno okno, dodatno ogrevanje, avtomatska klimatska naprava, rotacijska luč, pnevmatike: 315/80 R22,5, listnato vzmetenje spredaj in zadaj, EURO 5, ročni menjalnik, VEB, pogon 8x4, medosna razdalja: 5.100 mm, Spitzer silos nadgradnja 23 cbm, letnik: 1997, GHH Rand kompresor, lastna teža: 12.860 kg, skupna teža: 32.000 kg. Za vprašanja prosimo, napake in vmesna prodaja pridržane.

Stanje: rabljeno, največja dovoljena obremenitev: 32.750 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2025, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.739 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2025, Oprema: ABS, 3-axle TMT walking floor semi-trailer, 92 cbm First registration: 05/2025 Itjdpfxjzayide Aicsh Mileage: only 75,854 km Internal dimensions (LxWxH): 13,600 x 2,470 x 2,650/2,825 mm Axle spacing: 1,310 mm Unladen weight: 7,870 kg Fifth-wheel height: 1,150 to 1,180 mm Chassis made of S700 MC steel, hot-dip galvanized SAF axles with large 430 mm disc brakes, reinforced “CD” design WABCO trailer EBS with RSS (Roll Stability Support) 1st axle: lift axle 3rd axle: steering axle Aluminium air tanks Tyres: 6 x 385/65 R 22.5 JOST crank landing gears, full load capacity ASPÖCK full LED lighting 2 x LED work lights Toolbox: 800 x 500 x 500 mm CARGOFLOOR moving floor with 21 boards, material thickness 8.0 mm, ribbed Full-length sliding bearings Control via wireless remote Rear closure plate in stainless steel 2 bows, reinforced design. Only 2 transverse bows for easier and faster loading! Reinforced retractable roof tarpaulin Foldable rear cross member Load securing code: EN 12642 XL "Rollfix" protective tarpaulin for the left sidewall along the entire length with winding mechanism RENTING is the new BUYING – full service rental available now!

Stanje: rabljeno, največja dovoljena obremenitev: 33.360 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 6.000 mm, prostornina tovornega prostora: 29 m³, skupna širina: 2.470 mm, skupna višina: 3.900 mm, Leto izdelave: 2025, Oprema: ABS, D-TEC 3-axle container chassis 20 FT ADR with VANHOOL single-compartment pressure tank container, 29 cbm First registration: 04/2025 Tank container year of manufacture: 2006 Unladen weight: 5,640 kg Chassis: Steel, fully hot-dip galvanized and painted (2-coat RAL 9005) Fifth wheel height: 1,180 mm Tyres: 6 x 385/65 R 22.5 Hankook Wheels: High-gloss aluminium rims Lighting: Full LED, round taillights 2x LED work lights SAF axles with large 430 mm disc brakes 1st axle: lift axle Itodpjyxb Hcefx Aicjh KNORR trailer EBS VANHOOL 20 FT tank container, V2A stainless steel 1 compartment 29,362 L capacity Test pressure: 2.86 bar Operating pressure: 2 bar Manhole cover DN500 Outlet at the rear centre in stainless steel box RENTING is the new BUYING – Immediately available for rent or full-service leasing from us.

Stanje: rabljeno, največja dovoljena obremenitev: 31.800 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2015, Leto izdelave: 2015, Oprema: ABS, Oprema: Zračno vzmetenje Varnost: ABS * EBS Isdpfxszc Sp Uo Aicjth

Stanje: rabljeno, največja dovoljena obremenitev: 29.580 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2015, naslednji pregled (TÜV): 09/2024, dolžina tovornega prostora: 7.700 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.500 mm, Oprema: ABS, Kempf SKM 35/3 thermal tipping trough Capacity: 28 cu.m. Iedpfx Aioy N Hbaocoth Tyres: 385 / 65R 22.5 Lifting axle: 1st axle BPW axles Reverse warning system Reversing lights Tool/storage boxes

Stanje: rabljeno, največja dovoljena obremenitev: 29.280 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2020, naslednji pregled (TÜV): 12/2025, dolžina tovornega prostora: 7.900 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.350 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, skupna višina: 2.838 mm, Oprema: ABS, 2-way aluminium tipper semi-trailer SK 35/3-S with grain slide / pendulum tailgate / ALCOA aluminium rims ### Floor made of 10 mm aluminium sheet ### Aluminium tipping body, Payload: 29,280 kg, Iodpfowllhwox Aiceth Volume: approx. 25 m³ 1st axle liftable, PVC roll tarp (roller tube design), crank to the right for rolling up, 2x rear LED work lights, SAF axles, Steel standing platform with safety grating, protective railing, and access ladder, Rear underrun protection foldable, Left underrun protection, 2x drop-down landing legs, Disc brakes, Broom and shovel holders mounted on front wall, Air suspension, Pendulum side wall with pneumatic 2-hook locking, 1x grain slide, Side walls on the left, 1x stainless steel toolbox on the right, Fenders on all wheels, With loading pressure gauge (tonne graduations), Cargo area dimensions LxWxH: 7,900 x 2,400 x 1,350 mm, Side wall height: approx. 1,350 mm, Loading height: approx. 2,838 mm, External dimensions LxWxH: 9,000 x 2,550 x 2,838 mm, Wheelbase: 3,530 x 1,320 x 1,320 mm, Tyres: 385/65R22.5 on ALCOA aluminium rims, Tread depth right front: 13 mm, Tread depth right centre: 6 mm, Tread depth right rear: 15 mm, Tread depth left front: 14 mm, Tread depth left centre: 7 mm, Tread depth left rear: 14 mm, Additional equipment: KEMPF 3-axle tipper semi-trailer, type SK 35/3-S, hydraulic tipping to two sides (left and rear), Coupling height loaded approx. 1,230 mm, SAF axle unit type INTRADISC plus (B 9) in off-road design, With disc brakes, Disc diameter approx. 430 mm (large disk), With light-weight brake callipers, Axle B9-22S01, Air suspension unit with large 350 mm air bellows, 1st axle as lift axle, fully automatic and traction support, can be raised via cab switch when loaded → speed-dependent in accordance with EC directives, with forced lowering when unladen, Disc wheels: 11.75 x 22.5, ALCOA aluminium wheels, Dura-Bright, EVO, ET 120, 26 mm centre bore, Chrome-plated wheel nut covers, Suspension with lifting and lowering device (rotary valve), With electronic braking system (EBS), Knorr brand, With parking brake by spring actuator, With RSP (Roll Stability Program), ABS in 4-channel version (4S/2M), With brake light supply (ABS emergency function), Aluminium air tanks 2x 60 litres, King pin 2" with mounting plate, 2x aluminium drop-down landing legs, prepared for unhooking the trailer completely, maximum support load 24 t (2x 12 t), Hydraulic multi-piston press with cardanic suspension, Single-circuit hydraulic system, DN 20 quick coupling, Techno Chemie brand, unit 6 (type 65), bolted version without breakaway coupling, Separate LED license plate lights (left and right), LED marker lights left and right at chassis end, Side marker lights (LED) and front position lights (LED), Large multi-chamber tail lights, 2x LED work lights mounted at rear, switched via reverse gear, 1x 15-pin socket, PVC half-shell fenders, Fenders with foldable mud flaps, Rear underrun protection at the chassis end in foldable aluminium version (in accordance with EC directives). Tow hitch integrated into underrun protection brackets, Vehicle with contour markings (white sides, red rear), Tipping body made from aluminium panels and profiles, welded construction, Floor made of 10 mm aluminium plate, additionally reinforced from below, raised on left side, Front wall made of 40 mm

Stanje: novo, prevoženi kilometri: 232.115 km, prva registracija: 04/2009, vrsta goriva: dizel, gorivo: dizel, emisijski razred: Euro 5, Leto izdelave: 2009, Oprema: ABS, EBS (Elektronski zavorni sistem), elektronski program stabilnosti (ESP), klimatska naprava, tempomat, = Dodatne opcije i oprema = - Kontrola stabilnosti = Napomene = = Dodatne opcije i oprema = - Motorna kočnica = Napomene = Iveco Magirus 260 S42 kamion za smeće UMLEERER 60 lit - 5 m³ sa Zöller Medium XXL 24 nadogradnjom i MOBA vagom • Klimatizacija • Motorna kočnica • Tempomat • Diferencijalna blokada • Kočnica za stajalište • Pomoć pri kretanju uzbrdo • Kamera za vožnju unazad • Rotaciona svetla • Krovni otvor • Radio-CD plejer • Multifunkcionalni volan • 3. osovina: upravljiva / podizna! • Dimenzije pneumatika 1. i 3. osovine: 385/65 R22,5 • 2. osovina: 315/80 R22,5 • Stanje pneumatika: ~ 10 mm • Međuosovinsko rastojanje: 4.200 mm • Neto težina: 17.425 kg • Dozvoljena ukupna masa: 26.000 kg • ZÖLLER nadogradnja Medium XXL 24 sa MOBA vagom i štampačem • ZÖLLER LIFTER 356 za kontejnere 60/120/240/1.100 litara – 5 m³ (5.000 litara) - nemačko vozilo! - TÜV / tehnički pregled na zahtev i uz doplatu: NOVO! Itodpfxjwmn Rdj Aicjh Greške i prethodna prodaja zadržani! = Dodatne informacije = Oštećenja: nema

Stanje: rabljeno, prva registracija: 08/1978, Leto izdelave: 1978, LAG cisterna za gnojevko 37 m³ s 6 prekatov ! Za približno 10.000 € popolnoma obnovljena, nov zavorni sistem, nova 3. os, nova električna napeljava, novo zračno vzmetenje! • ALU konstrukcija • Kapaciteta 37.200 litrov • 6 prekatov po 6.200 litrov • 6 pokrovov odprtin • Neposredni izpust na zadnji strani! • 3 x BPW osi z zračnim vzmetenjem • Bobnaste zavore • Pnevmatske gume 385 / 65 R 22.5 - Nova tehnična! Iodpfx Aowmpatoicsth - Pripravljena za takojšnjo uporabo! Pridržujemo si pravico do napak in predhodne prodaje!

Stanje: rabljeno, prva registracija: 08/2014, Leto izdelave: 2014, RSBS-35/24 LK ∗Potisni pod/Walkingfloor∗90m³ ∗ALCOA ∗ TLAK TOP! TLAK: ZELO DOBRO STANJE! Nadgradnja: popolnoma aluminijasta Okvir: jeklo Prostornina: 90 m³ Portalna vrata zadaj 3 x SAF osi zračno vzmetenje dvižna os dvižna/spuščalna naprava kolutne zavore Odrasna ploščad ponjava na rolo ALU drsna stena hidravlično zaklepanje WABCO - Smartboard ABS ALCOA - platišča Pnevmatike: 385/65 R 22.5 Globina profila: 17/13 10/10 6/6 mm Dovoljeno skupno težo: 35.000 kg Itsdpfozb Ix Njx Aicoh Lastna teža: 8.200 kg Skupna dolžina: 14.050 mm Notranje mere: 13.370 x 2.470 x 2.720 mm (DxŠxV) - nemška polprikolica! - 1. lastnik - Tehnični pregled: po želji in za doplačilo nov! Pridržujemo si pravico do sprememb in predhodne prodaje!

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2024, naslednji pregled (TÜV): 06/2026, prostornina tovornega prostora: 30 m³, Leto izdelave: 2024, Oprema: ABS, 3-axle LoF (agricultural) slurry tanker semi-trailer SANH SCHWARTE-JANSKY "GÜLLE-TAXI" Stainless steel V2A slurry tank semi-trailer, 30,000 liters First registration VOGELSANG rotary lobe pump type VA 186-260Q, capacity max. 6,000 liters/min, with replaceable housing liners Automatic pump shut-off, tank filling level easily adjustable by the driver Flush line DN150, with 3 outlets (one before each baffle and one before the front wall) 2x baffle plates Manholes: 3 pcs., DN500 Suction funnel (8") at rear top Stainless steel hose trays left and right, approx. 6,000 mm long Swivel outlet at the rear in 6" with Perrot coupling Drain/blow-out system for the product hose All slide valves pneumatically operated including monitoring function Control of slide valves via RADIO REMOTE CONTROL Complete piping in V2A stainless steel Itsdpfx Aisy U A R Ujceh SAF Off Road axles with drum brakes 1st axle lift axle 3rd axle trailing steering axle WABCO trailer EBS with RSS stability program Tires 6x 560/60 R 22.5 Unladen, road-ready weight approx. 7,700 kg Fifth wheel height approx. 1,350 mm JOST crank landing gears Stainless steel toolbox, left side, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING – with us, also available immediately on a full-service rental contract.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.205 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Overall width: 10,402 mm Floor length: 8,585 mm Total width: 2,550 mm Overall height to upper frame: 3,550 – 3,600 mm Overall height to tarp peak: 3,710 – 3,760 mm Track width: 2,040 mm King pin to second axle: 6,120 mm Fifth wheel height: 1,200 mm Axle spacing: 1,310 mm Rear overhang: 1,367 mm Floor height: 1,400 – 1,450 mm Maximum height with the body tipped: 9,720 – 9,770 mm Technical gross weight: 42,000 kg Axle load: 8,000 kg Axle load, technical: 9,000 kg Saddle load: 12,000 kg Saddle load, technical: 15,000 kg Loading volume: 47.6 cbm Unladen weight: 6,233 kg Weight stated with an accuracy of +/-3% Axle spacing: 1,310 mm Distance kingpin to 2nd axle: 6,120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with dropped gooseneck, longitudinal beams with recessed fifth wheel plate area Welded structure, weight-optimized using high-grade S700 steel Side impact protection from aluminum profiles in accordance with ECE 73 2 plastic wheel chocks Axles and suspension 1,200 mm unladen fifth wheel height Rigid axles 3rd lift axle 1st lift axle SAF disc brake axles 3x 9,000 kg 22.5 INTRADISC CD 2-speed landing legs, full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pieces Rubber mud flaps with Wielton logo behind third axle 6x steel wheels 22.5–11.75 ET=120 Protective caps for wheel bolts Tyres 6x 385/65/22.5 standard tyres (Bridgestone/Hankook) Other chassis equipment 44 L toolbox (mounted front left on the chassis) 30 L water tank (mounted centre left on the chassis) Mount for dust bag on chassis, 1 pc. Dust bag, 2 pcs. Shovel and broom on chassis above mudguard Itjdpfxjp Ncb Nj Aicoh Extendable rear ladder Internal height: 2,100 mm Double-wing aluminium combination door, aluminium (1/2 ?) vertical with portal crossbeam Side walls, SL internal thickness 2.5 mm, fully welded Front wall inclined at 20 degrees Pallet-width design 7 mm floor 2 grain chutes 2 tension latches at the bottom Transverse beam spacing under the floor: 360 mm Body damping: Polyblock Other superstructure equipment Tension chain between side walls Control stand on chassis frame, access front left (driver’s side) PVC rolling tarp 680 g/m² with quick release and aluminium winding tube (vertical tail with extension triangle at front and rear, centre tube welded into tarp) Braking system/pneumatics Steel air tanks Spring pressure gauge Automatic lowering when tipping Wabco brake system 2S/2M Chassis paintwork Chassis painted RAL 7021 (black grey) Body paintwork Body painted RAL 7001 (silver grey) Tarp colour RAL 9006 (white aluminium) Hydraulics HYVA hydraulic cylinder, upper eye mount Hydraulic connection kit 1" Electrics Partial LED lighting LED reverse lights 2 pcs. 2x 7-pin + 1x 15-pin with EBS connection, without link cables to tractor unit Lighting partial LED Aspöck-EuroPoint III 2 LED work lights on landing legs Additional systems Tipping angle indicator Control line for lift axle from cab The system is designed for semi-trailers and trailers and monitors the vehicle’s tyre pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors mounted on the rims (monitoring tyre pressure and temperature) and a device connected to the EBS. Reflective warning signs Partial contour marking with Wielton logo Partial side contour marking, white