Faymonville Megamax Tiefbett 2X10 T nakup rabljenega (58.722)

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 38.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: sivo-črna, Oprema: ABS, Cargo Area: • Extendable cargo area with pneumatically operated locking mechanism Bjdpfx Apjiu Etrsbjwt • Cargo platform with approx. 30 mm thick timber flooring • 7 pairs of external folding lashing rings (LC 5,000 daN) • 3 pairs of external folding lashing rings (LC 10,000 daN) • Cutouts in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydromechanically forced-steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with lift and lower valve • Axle tool kit • Tyres: 385/65 R 22.5 • TPMS tire pressure monitoring system compliant with ECE R 141 Brake System: • WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX at the front control strip with 24N, 24S & 15-pin sockets • Connections as per ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Standard Accessories Included: • Remote-controlled steering from front and rear via cable remote control with push buttons, including single-track axle monitoring • 4 wheel chocks with holders mounted on the front wall • 2" king pin • One galvanized steel front wall, approx. 1,600 mm high • Yellow-red air couplings at the galvanized front connection strip • White reflective tape compliant with EU standards on both sides, on extension, and at the rear of the trailer in red • European reflective plates (red-yellow) at the rear of the trailer • One mud flap at the rear of the trailer • Operating manual and instructions • Mount for a revolving beacon at the rear of the trailer • Cargo area with approx. 30 mm thick timber floor inset in omega profiles • 10 pairs of stake pockets (100 x 50 mm) in the outer frame of the cargo bed • 1 spare wheel holder under the cargo area, right-hand side in the direction of travel • Electro-hydraulic unit • At the gooseneck and rear panel left/right, each with bracket for warning signs, incl. socket • Coated sand layer on the main beam as anti-slip protection • 6 pairs of WADER container pockets in the cargo area for 1x20ft, 2x20ft or 1x40ft containers; additional locking point provided in the extension for a 45ft container • 4 pairs of transverse stake pocket rails in the cargo area for plug-in stakes 100 x 50 mm • Access ladder mounted on the right side in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm at the front under the cargo bed, left in the direction of travel • BEKAMAX (Pico) centralized lubrication system with removable pump guard • Lift axle on front axle, controlled via TEBS E according to dynamic axle load and load status • Wireless remote control for steering, in addition to cable operation, with indicator lights on receiver for single-track monitoring • Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, equipped with position light • Bracket for revolving beacon on the warning signs • 80 km/h speed sticker on rear and both sides • Load gauge for axle load determination, including load chart • HRM (High Resistance Metallisation) of the outer frame • Complete steel construction shot blasted; subsequently, defined visible surfaces metallised by hot-dip application with ZINACOR 850 (85% zinc – 15% aluminium)

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm Bwjdpfx Apok Af Svjbot - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead Bwodet Ag Uwepfx Apbet - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools Bwodpsuqlmnsfx Apbst - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side Bwjdpfx Apjunrapjbjt - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide Bwsdpsmfqi Iefx Apbst On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) Bsdpfx Ajiu Er Aopbowt - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Bwjdpfoma Hf Rex Apbst Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear • Mounts for warning panels including socket left and right at the gooseneck and rear panel • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing

Stanje: rabljeno, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 09/2024, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, Leto izdelave: 2024, obratovalna teža: 10.600 kg, Oprema: ABS, Vrat: -Vrat z oblogo prevleko iz trdega lesa, debeline 30 mm Bwsdpfx Asw Adkxspbet -Vrat na zadnji strani v ravni izvedbi -3 pari zateznih obročev (LC 5.000 daN) Nakladalna površina z izvlečno izvedbo: -Nakladalna površina z izvlečno izvedbo -5 parov zateznih obročev, ki se zunanje odklapljajo (LC 5.000 daN) -3 pari zateznih obročev, ki se zunanje odklapljajo (LC 10.000 daN) -1 par zateznih obročev, nameščen vodoravno spredaj na nakladalni površini (LC 10.000 daN) -Izrezi na zunanjem okvirju nakladalne površine za pritrditev zategovalnih pasov (LC 2.000 daN) -Obloga iz trdega lesa, debeline približno 48 mm; nad osmi je prevleka iz valjane pločevine Podpora sedla: -JOST podpore sedla (mehanske) z 2-stopenjskim menjalnikom za 24 t nosilnosti (5 t testna nosilnost) Osi in pnevmatike: -BPW osi, dve fiksni osi, dve sledilni osi -Zračna vzmet, z bobnasto zavoro, z funkcijo dviganja/spuščanja -Sledilne osi z elektromagnetično blokado za vožnjo v vzvratno smer, ki se aktivira preko vzvratnega prestave ali ročno -Pnevmatike 205/65 R17.5 Zavorna naprava: -Zavorna naprava v skladu z uredbami EU, z EBS-E (4S3M) Jeklena konstrukcija: -Jeklena konstrukcija iz visoko trdnih finozrnatih jekel -Vrste jekel: -S355J2+N/S355MC (meja tečenja 355 MPa) -S690QL/S700MC (meja tečenja 690 MPa) Električna napeljava: -Električna napeljava v skladu z uredbami EU, razsvetljava 24 voltov, ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX na priključni letvi spredaj s vtičnicami 24N, 24S in 15-polno -Barvanje: -Prvo razredna in dolgotrajna protikorozijska zaščita standardno peskane varjene konstrukcije je zagotovljena z dvokomponentnim (2K) cinkovo-prašnim temeljnim premazom -Visokokakovosten dvokomponentni (2K) končni premaz, enobarvni, v barvi Novagrau Vključena dodatna oprema: -En rezervni zračniški kolo z nosilcem pred čelno steno -2" kraljeviče -En pocinkana jeklena čelna stena, približno 400 mm visoka -Na pocinkani priključni letvi spredaj rumeno-rdeče zračne spojke -4 kosi klinih z nosilcem na čelni steni -Pocinkane zložljive podpore pod poševnino nakladalne površine -Nosilec za rotacijsko luč na zadnji strani prikolice -Podaljški, pocinkani, izvlečni za približno 230 mm na vsaki strani -Bel refleksni trak v skladu z uredbami EU, na strani, na izvlečni površini in zadaj rdeč -Na vratu in na zadnji plošči na levi in desni strani po en nosilec za opozorilne table, vključno z vtičnico -En odbijač blata na zadnji strani prikolice -Evropski odsevni znaki (rdeče-rumeni) na zadnji strani prikolice -Priročnik in navodila na USB pomnilniku -Sistem za nadzor tlaka v pnevmatikah (TPMS) v skladu z ECE R 141 -Na vratu aluminijaste stranske stene in zadnja stena, ki se vstavi, približno 2.440 x 400 mm -Zadnje, pocinkane vstavne ograje so odstranljive, dolžina nadgradnje je približno 2.560 mm -7 parov držal za kontejnerje WADER -1 x 20-čevlni kontejner na nakladalni površini; 1 x 40-čevlni kontejner na nakladalni površini; 1 x 40-čevlni kontejner nad vratom; 2 x 20-čevlni kontejner -7 parov držal za ograje za vstavne ograje 100 x 50 mm na zunanjem okvirju nakladalne površine -Dvižna os na sprednji osi z nadzorom preko TEBS E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenitve -Premikajoča se letva za pritrditev aluminijastih plošč na zadnji strani vozila -Na valjani pločevini na vratu in na nakladalni površini prevleka iz peska kot zaščita pred zdrsom -Štiri opozorilne table, ki se približno za 400 mm izvlečejo, približno 423 x 423 mm, z pozicijsko lučjo -Na opozorilnih tablah nosilec za

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2019, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, medosna razdalja: 10.160 mm, barva: rdeča, Leto izdelave: 2019, Oprema: ABS, 1 x dvižna os 3 x krmilna os. Daljinsko upravljanje s pomočjo radia. Hidravlična rampa. Kamera. = Dodatne informacije = Konfiguracija osi Mere pnevmatik: 245/70R17.5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvojne pnevmatike; profil pnevmatik levo notranji: 50 %; profil pnevmatik levo zunanji: 50 %; profil pnevmatik desno notranji: 50 %; profil pnevmatik desno zunanji: 50 % Zadnja os 2: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 30 %; profil pnevmatik levo zunanji: 30 %; profil pnevmatik desno notranji: 30 %; profil pnevmatik desno zunanji: 30 % Zadnja os 3: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 40 %; profil pnevmatik levo zunanji: 40 %; profil pnevmatik desno notranji: 40 %; profil pnevmatik desno zunanji: 40 % Zadnja os 4: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 60 %; profil pnevmatik levo zunanji: 60 %; profil pnevmatik desno notranji: 60 %; profil pnevmatik desno zunanji: 60 % Teže Lastna teža: 11.344 kg Nosilnost: 54.656 kg Največja dovoljena masa: 66.000 kg Vzdrževanje Tehnični pregled (APK): veljaven do 02.2027 Finančne informacije Cena: Na zahtevo Identifikacija Bwjdpozp Drysfx Apbjt Številka modela: max trailer N/A F-S44 / STEERING = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ. (Joris Versteijnen NL-DE-GB), (Wouter Greutink NL-DE-GB-ES-IT). Govorimo tudi rusko. Po najboljših močeh se trudimo, da navedemo pravilne informacije. Kljub temu iz navedenih besedil ni mogoče pridobiti pravic.

Stanje: rabljeno, največja dovoljena obremenitev: 65.350 kg, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2020, With air suspension, hydraulic dual-circuit forced steering (turntable) - Platform design “plateau” for crane counterweight - Rectangular corners, closed outer frame - Front integrated steering linkage in the frame - Turntable-mounted fifth wheel plate with replaceable 3.5” kingpin and adjustable steering wedge - Fifth wheel load: 28,000 kg - Turning radius: 2,700 mm Chassis - 5-axle chassis with air suspension incl. lift and lower valve - Axles manufacturer: SAF - Tires: 445/65 R 22.5 Braking system - Dual-line, all-wheel pneumatic braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake using spring-actuated cylinders - ABS (anti-lock braking system) - Lifting capability for the 1st and 2nd axle (in direction of travel) Technical Data Loading area (LxW): approx. 12,500 x 2,550 mm Bwjdpfxox I U Eqs Apbjt Coupling dimension B: 11,550 mm Load height (unladen, in chassis area): approx. 1,490 mm (at laden fifth wheel height of 1,200 mm) Steering 1st axle: steered ahead 2nd axle: fixed 3rd to 5th axles: hydro-mechanically forced steered (dual-circuit steering) Radio remote control Electrical unit

Stanje: rabljeno, skupna masa: 42.000 kg, prva registracija: 06/2013, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Proizvajalec: Faymonville Tip: Euromax Leto izdelave: 2013 Vrsta izdelka: Rabljeno Bwsdpfeyr Uyzox Apbst Podatki: Prva registracija: 13.06.2013 Skupne mere D x Š x V: 13,50 x 2,55 x 4 m Dovoljena skupna masa: 42.000 kg Lastna masa: 10.900 kg Lokacija: 45143 Essen takoj na voljo

Stanje: rabljeno, največja dovoljena obremenitev: 27.300 kg, skupna masa: 40.000 kg, prva registracija: 02/2012, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Proizvajalec: Faymonville Tip: Euromax GTZ-3AUB Leto izdelave: 2012 Vrsta izdelka: Rabljeno Podatki: Prva registracija: 02/2012 Skupne mere D x Š x V: 13,35 x 2,55 x 3,70 m Bjdpjy H T Dpsfx Apbowt Lastna teža: 12.700 kg Dovoljena skupna masa: 40.000 kg Nosilnost: 27.300 kg Število osi: 3 Posebnosti: Raztegljiv za 3 m (16,35 m), prisilno krmiljena dohodna os, hidravlična dvižna postelja za labodji vrat Lokacija: Essen Takoj na voljo

Stanje: rabljeno, lastna masa: 10.650 kg, največja dovoljena obremenitev: 40.310 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, skupna dolžina: 13.100 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Za vsak rabljen priklopnik prejmete aktualno in celovito poročilo o pregledu in funkcionalnosti. Gosi vrat: -Gosi vrat s trdo leseno oblogo debeline 30 mm -Gosi vrat zadaj v ravni izvedbi -3 pari pritrdilnih obročev (nosilnost 5.000 daN) Nosilna površina v izvlečni izvedbi: -Nosilna površina v izvlečni izvedbi -5 parov pritrdilnih obročev, ki se zložijo navzven (nosilnost 5.000 daN) -3 pari pritrdilnih obročev, ki se zložijo navzven (nosilnost 10.000 daN) -1 par pritrdilnih obročev, nameščenih v ležečem položaju na sprednji strani nosilne površine (nosilnost 10.000 daN) Bwodpexwnfmsfx Apbet -Izrezi na zunanjem okvirju nosilne površine za obešanje zateznih trakov (nosilnost 2.000 daN) -Trda lesena obloga debeline približno 48 mm, nad osmi je obloga iz valjane pločevine Osi in pnevmatike: -Osi BPW, dve osi fiksni, dve osi s krmiljenjem -Zračna vzmetenje, s bobnastimi zavorami, z funkcijo dvigovanja/spuščanja -Krmiljene osi z elektromagnetsko blokado za vzvratno vožnjo, ki se aktivira s prestavo za vzvratno vožnjo ali ročno -Orodje za osi -Pnevmatike 205/65 R17.5 -Sistem za nadzor tlaka v pnevmatikah TPMS, v skladu s standardom ECE R 141 Dodatna oprema vključena: -En rezervni kolesni komplet z nosilcem pred čelno steno -2" kraljevska vlečna glava -Pocinkana jeklena čelna stena, približno 400 mm visoka -Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke -4 kosi zavor, z nosilcem na čelni steni -Pocinkane zložljive opore pod poševnino nosilne površine -Nosilec za rotacijsko luč na zadnji strani priklopnika -Razširitve, pocinkane, izvlečne za približno 230 mm na stran -Bel odsevni trak v skladu z direktivami EU, nameščen na boku, na izvlečnem delu in zadaj rdeče barve -Na gosi vratu in na zadnji plošči, na levi in desni strani, nosilci za opozorilne table, vključno z vtičnico -Lovilec umazanije na zadnji strani priklopnika -Evropske odsevne table (rdeče-rumene) na zadnji strani priklopnika -Na gosi vratu in na zadnji steni, ALU stranske plošče in zadnja plošča, ki se vstavi, približno 2.440 x 400 mm -Zadnji, pocinkani stranski nosilci so snemljivi. Dolžina nadgradnje približno 2.560 mm -7 parov WADER posod za zabojnike: -1 x 20-stopični zabojnik na nosilni površini -1 x 40-stopični zabojnik na nosilni površini -1 x 40-stopični zabojnik nad gosi vratom -2 x 20-stopični zabojniki -Podporni blok z 1 parom WADER posod za zabojnike (največja nosilnost približno 20.000 kg) -7 parov posod za stranske nosilce za vstavne nosilce 100 x 50 mm v zunanjem okvirju nosilne površine -Dvignjena os na sprednji osi, upravljanje preko TEBS E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenitve -Pomikalna vstavna letev za ALU rampe na zadnji strani vozila -Na valjani pločevini na gosi vratu in na nosilni površini, nanos plasti peska za preprečevanje zdrsavanja -Štiri izvlečne opozorilne table, približno 400 mm, približno 423 x 423 mm, z pozicijsko lučjo -Na opozorilnih tablah nosilec za rotacijsko luč -Nalepka za omejitev hitrosti 80 km/h zadaj in na obeh straneh -Merilnik obremenitve za ugotavljanje obremenitve osi, vključno s tabelo obremenitve

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2014, skupna dolžina: 13.900 mm, skupna širina: 2.540 mm, vzmetenje: zrak, Leto izdelave: 2014, Dodatne informacije: Znamka: FAYMONVILLE Model: Telemax Konstrukcija: platforma (platforma, dolžina L = 13758 – 25258 mm, podaljšljiva) Leto: 09.2014 Šasija: YAFSR314000015733 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 13900 mm / 2540 mm Mase: poln/prazn: 75000 kg / 15810 kg PODALJŠLJIVA / VSE OSI SE OBRNEJO Letnik modela: 2014 Vrsta vzmetenja: zračno Zavore: bobnaste Dvignjena os: dvignjena os Vrsta vzmetenja: zračno Zavore: bobnaste Krmiljenje: krmiljenje Vrsta vzmetenja: zračno Zavore: bobnaste Krmiljenje: krmiljenje = Več informacij = Vzmetenje: zračno vzmetenje Sprednja os: dvignjena os Srednja os: krmilna os Zadnja os: krmilna os Prazna teža: 12.500 kg Nosilnost: 46.500 kg Bwsdpfxszwkp Io Apbst Maksimalna dovoljena masa vozila: 59.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2009, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, Leto izdelave: 2009, Dodatne informacije: Znamka: FAYMONVILLE Model: Telemax Zgradba: nizkopodni priklopnik (platforma D=13.330-17.530 mm, raztegljiva / V=1.400 mm) Leto: 01.2008 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 13.800 mm / 2.550 mm Mase: polna/prazna: 59.000 kg / 11.310 kg VSE OSI KRMILJENE Modelno leto: 2007 Tip vzmetenja: zračno Zavore: bobnaste Krmiljenje: krmiljeno = Več informacij = Vzmetenje: zračno vzmetenje Srednja os: krmiljena Zadnja os: krmiljena Lastna masa: 11.310 kg Bjdpszhvqlofx Apbjwt Nosilnost: 47.690 kg Skupna masa: 59.000 kg

Stanje: novo, največja dovoljena obremenitev: 48.930 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Celotno zalogo vozil, vključno z vozili, ki so na voljo takoj in v kratkem roku, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. "Gooseneck" prikolica * s poševnimi robovi spredaj, približno 45° in z zadnjim poševnim robom, približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * trdna lesena obloga, debeline približno 30 mm Tovorilna površina * dvodelna, izpodvlačna izvedba z zadnjim poševnim robom, približno 500 mm x 8° * 5 parov pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 5.000 daN) * 4 pari pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščenih ležeče na sprednji strani tovorilne površine (nosilnost 10.000 daN) * 1 vmesna miza, približno 250 mm * izrezi v zunanjem okvirju tovorilne površine za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * trdna lesena obloga, debeline približno 48 mm, nad osmi je valjasta kovinska obloga Osi * osi BPW, hidravlično-mehansko sinhronizirano krmiljenje * tehnična nosilnost osi: 12.000 kg na os * zračna vzmetenje z ventili za dvig in spuščanje Pnevmatike * 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) * TPMS sistem za nadzor tlaka v pnevmatikah, v skladu s standardom ECE R 141 Opore sedla * JOST opore sedla (mehanske) z dvostopenjsko prestavo za približno 24 t nosilnosti (približno 50 t testna nosilnost) Zavorna naprava * v skladu z direktivami EU z EBS-E (4S3M) Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * vrste jekel: S355J2+N/S355MC (meja tečenja 355 MPa) * S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu z direktivami EU, osvetlitev 24 voltov ASPÖCK-NORDIK (ASS3) * vse LED stranske markerne luči utripajo sinhronizirano s smerniki * ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S & 15-polni priključek, v skladu s standardom ISO. 24N ISO-1185 24S ISO-3731 15-polni ISO-12098 Barvanje * celotna jeklena konstrukcija, po varjenju, avtomatsko peskana z metodo vrtinčenja * drugo peskanje s korundom za optimalno oprijemljivost prevlečnega sistema * HRM-metalizacija celotnega podvozja vozila z ZINACOR 850 (85% cink/15% aluminij) za zagotovitev najboljše zaščite proti koroziji * končna barva z 2 plastma 2K-lak, enobarvno, v RAL 3002 Karminrot, v skladu s sistemom RAL 841GL * platišča v srebrni barvi. Zadnji del je metaliziran in pobarvan v RAL 9010 (čista bela) * metalizirano barvanje ni mogoče * test barvne strukture izveden v testu meglenega spreja s soljo, v skladu s standardom ISO 9227-NSS * zaščita notranjih prostorov s posebnim voskom Vključno z naslednjo dodatno opremo 2-palčni kraljevi vtič * elektro-hidravlična agregat (± 45 kg) * dodatno krmiljenje od spredaj in od zadaj s kablom, upravljanje s pritiskovnimi gumbi, z nadzorom posameznih osi (brez vgradnje v centralno krmilno enoto) * na "gooseneck" prikolici in na zadnji plošči, na levi in desni strani, držalo za opozorilne table, vključno z vtičnico Bjdpozlwm Aofx Apbjwt * držalo za okroglo luč na zadnji strani prikolice * na "gooseneck" prikolici aluminijaste stranske stene in zadnja stena, ki se lahko vstavi, približno 2.440 x 400 mm (D x V) * zadnje pocinkane stranske stene se lahko odstranijo. (dolžina nadgradnje, približno 2.560 mm) (± 46 kg) * orodjarna omara, pocinkana, integrirana v poševno "gooseneck" prikolico (± 47 kg) * 4 pari WADER žepov za zabojnike na tovorilni površini za 20', 2x 20', 40' ali 45' zabojnik (± 40 kg) * 7 parov žepov za stranske stene, približno 100 x 50 mm

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Izpisek opreme Gooseneck prikolica * s poševnimi robovi spredaj, približno 45° in s poševnim zadnjim delom, približno 750 mm x 10° * 3 pari pritrdilnih obročev (LC 5.000 daN) * trda lesena obloga, debeline približno 30 mm Tovorilna ploščad * v dvojni izvlečni izvedbi s poševnim zadnjim delom, približno 500 mm x 8° * 6 parov pritrdilnih obročev, ki se zlagajo navzven (LC 5.000 daN) * 4 pari pritrdilnih obročev, ki se zlagajo navzven (LC 10.000 daN) * 1 par pritrdilnih obročev, nameščen vodoravno na sprednji strani tovorilne ploščadi (LC 10.000 daN) Bwodpfxszlwm Nj Apbet * 1 vmesna miza, približno 250 mm * trda lesena obloga, debeline približno 48 mm, nad osmijo obloga iz valjane pločevine * izrezi v zunanjem okvirju tovorilne ploščadi za obešanje napenjalnih trakov (LC 2.000 daN) Osi * BPW osi in vzmetenje, vse osi hidro-mehansko sinhronizirane * maksimalna tehnična obremenitev osi: 12.000 kg na os * zračno vzmetenje z ventilom za dvig in spuščanje * orodje za osi Pnevmatike * 245/70 R 17.5, indeks nosilnosti (146/146 F) * proizvajalec po naši izbiri Podporne noge * JOST podpore (mehanske) z dvostopenjskim menjalnikom za približno 24 t dvigalne nosilnosti (približno 50 t preizkusne nosilnosti) Zavorna sistem * v skladu z direktivami EU, z EBS-E (2S2M) brez priključnih kablov do vlečne enote Barvanje * vrhunsko in dolgotrajno protikorozijsko zaščito standardno kroglično peskane jeklene konstrukcije zagotavlja dvokomponentna (2K) temeljno prevleka s cinkovim prahom * vrhunska dvokomponentna (2K) * zaključna barva, enobarvna, v RAL 3002, karminsko rdeča * zadnji del je metaliziran in pobarvan v RAL 9010 (čista bela) * metalizirano barvanje ni mogoče Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * kvalitete jekla: S355J2+N/S355MC (meja tečenja 355 MPa) S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu z direktivami EU * razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX na sprednji priključni letev z vtičnicami 24N, 24S in 15-polno * priključki v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098 Vključno z naslednjo dodatno opremo * 2 palčni kraljevi člen (King pin) * pocinkana jeklena sprednja stena, približno 400 mm visoka * rumeno-rdeči zračni spojniki na pocinkani sprednji priključni letvi * 4 kosi zavorne podloge z nosilcem na sprednji steni (± 5 kg) * nosilec za rezervno kolo pred sprednjo steno * elektro-hidravlična enota (± 45 kg) * naknadno usmerjanje od spredaj in zadaj s pomočjo kabelskega daljinskega upravljanja, upravljanje z gumbi, z nadzorom osi (brez vgradnje v vlečno enoto) * nosilec na zadnjem delu gooseneck prikolice za aluminijaste nakladalne rampe * evropski reflektorski znaki (rdeče-rumeni) na zadnji strani prikolice * rumeno reflektorsko trakom v skladu z direktivami EU, stransko, na izvlečni strani in na zadnji strani prikolice * na gooseneck prikolici in na zadnji plošči, na levi in desni strani, nosilec za opozorilne table, vključno z vtičnico * priključna letev za aluminijaste nakladalne rampe na zadnji strani vozila * nosilec za okroglo rotacijsko luč na zadnji strani prikolice * pocinkane zložljive podpore pod poševnim delom tovorilne ploščadi * zaščitnik blatnikov na zadnji strani prikolice * navodila in opis na USB-ključu * nalepka za omejitev hitrosti 80 km/h na zadnji in na obeh stranskih straneh * manometer za obremenitev osi za ugotavljanje obremenitve osi, vključno s diagramom obremenitve.

Stanje: rabljeno, skupna masa: 44.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, Unladen weight: 11,800 kg Width: 12,000 mm Extendable forward for front loading of coupled flatbed deck - Gooseneck in compact design - L x W: 3,900 x 2,480 mm - Interchangeable 2" king pin - Integrated hydromechanical steering - Hydraulic lifting and lowering function, incl. support cylinders - Rated for a technical fifth wheel load up to 24t - 4-sided aluminium drop sides - Steering radius: 2,200 mm Flatbed Deck - Lowbed with external tubes - Flatbed length: 6,750 mm, extendable by 5,500 mm to a total of 12,250 mm - Flatbed width: 2,550 mm - Construction height: 200 mm - Loaded deck height approx. 300 mm with 100 mm ground clearance, or approx. 350 mm with 150 mm ground clearance - Front coupling claws for connection to gooseneck 2-Axle Chassis - Chassis in compact design - Air-suspended chassis (L x W approx. 2,750 x 2,550 mm) incl. lift/lower valve, Bodpfjy U Df Hjx Apbswt with 2 forced-steered axles, BPW make, wheelbase 1,330 mm - Chassis with wheel well Brake System - Dual-line full-wheel pneumatic brake system - Progressive central lubrication system - Radio remote control - Coupled height when loaded: 1,250 mm - Both axles with hydraulic forced steering

Stanje: novo, največja dovoljena obremenitev: 46.800 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Na naši spletni strani najdete naš celoten nabor vozil, ki so na voljo takoj ali v kratkem roku. Izbor iz opreme: Celotna oprema na zahtevo. "Labodje vrat": * "Labodje vrat" s poševnimi robovi spredaj, približno 45° in z zadnjo poševnostjo približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * Prevleka iz trdega lesa, debeline približno 30 mm Nosilna plošča, raztegljiva različica: * z zadnjo poševnostjo približno 1.000 mm x 8° * 5 parov pritrdilnih obročev, z zunanjim mehanizmom za zlaganje (nosilnost 5.000 daN) * 3 pari pritrdilnih obročev, z zunanjim mehanizmom za zlaganje (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščen vodoravno spredaj na nosilni plošči (nosilnost 10.000 daN) * Vrezanine v zunanjem okvirju nosilne plošči za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * Prevleka iz trdega lesa, debeline približno 48 mm, nad osmi protizdrsna prevleka. Osi: * Osi in vzmetenje BPW * Prva os je fiksna, vse ostale osi pa so hidravlično-mehansko sinhronizirane * Tehnična obremenitev osi: 12.000 kg na os * Zračno vzmetenje z ventilom za dvigovanje in spuščanje * Orodje za osi * Pnevmatike * 245/70 R 17.5 3PMSF * Indeks obremenitve (146/146 F) * TPMS: Sistem za nadzor tlaka v pnevmatikah, v skladu s standardom ECE R 141 Podporne noge Bedpfx Apjzk S Dmsbewt * Podporne noge JOST (mehanske) z 2-stopenjsko prestavo za približno 24 t dvigalne nosilnosti (približno 50 t preizkusne nosilnosti) Zavorna naprava * v skladu s predpisi EU z EBS-E (4S3M) Barvanje * Celotna jeklena konstrukcija, avtomatsko obdelana s peščanjem po varjenju * Drugo peskanje s korundom za optimalno oprijemljivost prevlečnega sistema * HRM-metalizacija celotnega šasije vozila s pomočjo ZINACOR 850 (85 % cink/15 % aluminij) za zagotavljanje najboljše korozijske zaščite * Končno barvanje z 2 plastmi 2K lakom * enobarvno, v barvi RAL 3002 Karminrot, v skladu s sistemom RAL 841GL * Platišča v srebrnosivi barvi. Zadnji del metaliziran in pobarvan v barvi RAL 9010 (čista bela) * Metalizirano barvanje ni mogoče * Barvna prevleka preizkušena s testom solne megale v skladu s standardom ISO 9227-NSS * Zapiranje votlin s specialnim voskom Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * Kakovost jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu s predpisi EU Osvetlitev * 24 Volt ASPÖCK-NORDIK (ASS3) * Vse LED stranske gabaritne luči utripajo skupaj s smerokazom * ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S & 15 polna * Priključek v skladu z ISO. 24N ISO-1185 24S ISO-3731 15 polna ISO-12098 Vključno z naslednjo dodatno opremo: * 2-palčni kraljevi priklop * Pocinkana jeklena sprednja stena, približno 400 mm visoka * Elektro-hidravlična agregat (± 45 kg) * Pomik sprednje in zadnje osi s kabelskim daljinskim upravljanjem preko tipk, z nadzorom ene osi (brez vgradnje v centralno mazalno enoto) * 1 par potopljenih pritrdilnih obročev vzdolž centralnega nosilca zadaj v poševnem delu (nosilnost 10.000 daN) (± 3 kg) * Na "labodjem vratu" aluminijaste bočne stene in zadnja stena, vstavljivi, približno 2.440 x 400 mm (D x V) * Zadnje pocinkane vstavne ograje je mogoče odstraniti. (dolžina nadgradnje približno 2.560 mm) (± 46 kg) * Orodje, galvanizirano, integrirano v poševni del "labodjega vrata" (± 47 kg) * 3 pari WADER žeepov za kontejnerje na nosilni plošči za 20' (30?) ali 40'? kontejner (± 30 kg) * 6 parov žeepov za vstavne ograje, približno 100 x 50 mm, v zunanjem okvi

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2009, Naprodaj je Faymonville MultiMAX 4-osni pol-prikolica nizkoploščad / globoka prikolica iz leta 2009 z dovoljeno skupno maso 71.000 kg. Prikolica ima 4 osi in hidravlične nakladalne rampe. Izjemno primerna je za prevoz gradbenih strojev, delovnih strojev, nakladalnikov, bagrov, goseničarjev in težkih gospodarskih vozil. Proizvajalec: Faymonville Model / Tip: MultiMAX / TL STZ-4AU Vrsta vozila: pol-nizkoploščad / nizkoploščadna polprikolica Prva registracija: 26.02.2009 Št. šasije / VIN: YAFTL409100009798 Število osi: 4 Dovoljena skupna masa: 71.000 kg Lastna masa po homologaciji: 16.800 kg Nosilnost (preračunano): pribl. 54.200 kg Obremenitev na os: 11.500 kg Obremenitev na zatič (pivot): 25.000 kg Dolžina vozila po homologaciji: 17,76 m Bsdpfx Aszhu A Hepbowt Širina po homologaciji: 2,76 m Barva: bela / bež 4-osna pol-nizkoploščad Hidravlične nakladalne rampe zadaj Razširljiva nakladalna površina / stranske razširitve Globokonosna izvedba za prevoz strojev Podporne noge spredaj Stranska orodjarna / zaboj za shranjevanje Rezervno kolo na labodjem vratu Privezne točke vzdolž nakladalne površine Robusten jeklen okvir Labodji vrat izvedba Osvetlitev in opozorilne table zadaj Primerna za prevoz težkega tovora in gradbenih strojev Krmarjena os = Dodatne informacije = Lastna masa: 16.800 kg Nosilnost: 54.200 kg Skupna dovoljena masa: 71.000 kg

Stanje: rabljeno, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2013, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2013, Proizvajalec: Faymonville Tip: STN-3UB Letnik: 2013 Bodpfx Apszkpcyobjwt Vrsta izdelka: Rabljen Podatki: Prva registracija: 13.02.2013 Število osi: 3 Celotne dimenzije (D x Š x V): 13,50 x 2,55 x 4,00 m Lastna teža: 10.900 kg Dovoljena največja masa: 42.000 kg Posebnosti: Prikolica s sedlom, nizkopodna prikolica, os s premičnim členkom, vozilo se sme uporabljati samo za vleko za vozilom s priključkom, skladnim s standardom ISO 7638 (5- ali 7-polni). Lokacija: 45143 Essen Opomba: na voljo takoj.

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Bwodpsg Sk Trefx Apbst Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: novo, največja dovoljena obremenitev: 44.000 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Bwedpfx Aev D Abtepbjt

Stanje: novo, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Gross weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Loaded coupling height: 1,200 mm Rear swing radius: 2,300 mm Loading platform length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Chassis length: 2,600 mm Chassis rear loading height at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Overall width: 2,540 mm Gross weight depends on fifth wheel load. Low-bed: Low-bed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking device. Supply lines are routed safely within the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of folding external lashing rings (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. Bwsdsizu Nwjpfx Apbet 2 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat lashing rings in trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm plug-in uprights in outer frame Gooseneck: Gooseneck in SNT design for maximizing loading area length, length approx. 3,785 mm. Gooseneck hydraulically lift/lower and detachable. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 PENDLE AXLE: "PENDLE-AXLE", all axles hydro-mechanically forced steered. Burst protection valve on axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position. Axles finished in 2 layers of single-color 2K paint (FAY-Gray-34-0260). Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools. Brake system: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor. Electrical system: Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S, and 15-pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Steel construction: Steel structure made of high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single-color in RAL shades of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Tyres: 245/70 R 17.5 3PMSF tyres, brand at manufacturer’s discretion. Load index (146/146F) Prepared to accommodate bolted container positioning devices for 1x 20' or 1x 40' container on the outer beams. Without container locks. - 2” king pin - Galvanized steel headboard, approx. 400 mm high - One spare wheel with holder in front of the headboard - Two wheel chocks with holder on the headboard - At the galvanized front connection panel, yellow-red air couplings - Steering from front and rear via remote cable control with push buttons, including single-track axle control (without installation on the tractor unit) Hydraulic connections from gooseneck to low-bed