Faymonville F-S43-1Aaf 7.3 Meter Extandable Powersteering! nakup rabljenega (27.415)

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection Crodpsh Hm Thofx Aiasc - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: novo, lastna masa: 9.600 kg, največja dovoljena obremenitev: 53.400 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: siv, Oprema: ABS, Platform area: - Platform with approx. 30 mm thick hardwood flooring - 10 pairs of folding lash rings (outward folding) Landing legs: - JOST landing legs with 2-speed gearbox, 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg per axle; first axle fixed, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise/lower valve - Axle tools included - Tyres: 385/65 R22.5 Braking system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrical system: - Electrical system according to EU regulations, 24 Volt lighting - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S and 15-pin sockets - Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component zinc-dust primer - High-quality 2-component topcoat, single-colour in Nova Grey - Rear section metallized and painted in RAL 9010 Accessories included: - Platform with approx. 30 mm thick hardwood flooring - 2" king pin - One galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks with holders on the front wall - Storage for 1,000 mm plug-in stanchions in the rear central beam - On the gooseneck and rear panel, left and right, a mounting bracket for warning signs with socket - Remote steering from front and rear, operated via cable remote control with push-buttons; with axle tracking control - Electro-hydraulic power pack - White reflective tape as per EU regulations along the side of the trailer, red at rear - 12 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load bed - European reflective plates at the trailer rear - One bracket for a rotary beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick Credjrq Dlfjpfx Aiajc - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable protector for the pump - TPMS tyre pressure monitoring system: - The towing vehicle must be capable of transmitting and displaying these data for correct readout - Lift axle on the front axle, automatically controlled by TEBS E in accordance with current axle load and trailer loading status - Radio remote control for the remote steering in addition to the cable remote, with indicator lamps on the receiver for axle tracking control - 5 pairs of crosswise stanchion pocket strips on the bed for 100 x 50 mm plug-in stanchions - 80 km/h speed stickers at rear and both sides - Adjustable access ladder mounted left and right in direction of travel - 2 reversing lights mounted at the rear panel - Load gauge for determining axle loads, including load diagram - HRM metallization of the outer frame: complete steel structure shot-blasted, then all designated visible areas hot metalized with ZINACOR 850 (Zinc 85% - Aluminum 15%)

Stanje: novo, lastna masa: 9.450 kg, največja dovoljena obremenitev: 35.550 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 1.560 mm, skupna širina: 2.550 mm, velikost pnevmatike: 385/65 R 22,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck designed as a loading platform with aluminum chequer plate covering - Front chamfered approx. 45° - Hydraulic lifting arm, lifting and lowering range approx. -280/+250 mm - Two king pin positions at DSR 2,300 and 2,000 mm - Compatible with tractor units: 4x2, 6x2, or 6x4 Loading Bay: - Loading bay, length approx. 9,500 mm, fitted with angle profiles at the bottom for pallet accommodation (distance from king pin to center of axle assembly approx. 8,000 mm) Axles, Suspension, and Tires: - BPW axle stubs with drum brakes and independent wheel suspension, hydraulic axle leveling with lifting and lowering function - Lowering lock on axles in case of suspension hose rupture, designed for maximum pallet height of 150 mm - Tires: 385/65 R 22.5 - TPMS tire pressure monitoring sensors installed in all wheels including spare wheels - TPMS system in accordance with ECE R 141 Surface Treatment: - Complete steel structure, shot-blasted automatically after welding - Second blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K topcoat, single-color in Novagrau (DB 7350) - Paint system tested with salt spray test according to ISO 9227-NSS; cavity sealing with special wax Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - Toolbox with lid, integrated in the rear area of the gooseneck, approx. 640 x 700 x 215 mm - Plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodized - 1 pair of foldable ALU side boards on the gooseneck, approx. 400 mm high, anodized - 2" king pin - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN) - Front connector strip with yellow-red air couplings; illuminated operation for gooseneck, suspension, and hydraulic bracing, with on/off switch - Mechanical drop-leg supports for approx. 48,000 kg support load - Access ladder mounted front right, with 2 plug-in handrails - WABCO Roll Stability Support (RSS) - On the longitudinal beams, 9 pairs of lashing rings (LC 6,300 daN) - On the longitudinal beams, a grating platform level with the load securing rails - Hydraulic preinstallation including control unit for installation of 3 pairs of our hydraulic load restraints - First and last axle, left and right, manually liftable - Storage box behind axle assembly, left and right, splash-water protected - Rear chamfer for easier pallet insertion - Eyes on the rear crossmember for mechanical bracing - 7-pin socket on rear crossmember - Electro-hydraulic unit - 4 wheel chocks with holders - 2 axle load gauges mounted on the left side including axle load chart - 3 pairs of hydraulic load restraints with swivel arm, adjustable on the longitudinal beams - Rear door with cross bracing, hinged left and hydraulically locked right, horizontally lockable at 90°, 105°, and 270° - Folding underrun protection for transporting up to 4 empty standard pallets - 1 spare wheel - License plate bracket with lighting, rear left on trailer - Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX brand, standard grease execution Csdoygvc Hjpfx Aiajrc

Stanje: novo, največja dovoljena obremenitev: 45.820 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt of features. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of externally foldable lashing rings (LC 5,000 daN) * 3 pairs of externally foldable lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the platform for fastening straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, with chequer plate above the axles Axles: * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools Tyres: * Tyre size 245/70 R 17.5 3PMSF, load index (146/146 F) * Brand at our discretion * TPMS tyre pressure monitoring system as per ECE R 141 * Data transmission to truck tractor via standardized EBS interface according to ISO 11992 * For correct display, the tractor must support the transmission and display of this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Braking system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M) without connections to the tractor unit Paintwork: * Complete steel structure, automatically shot-blasted after welding using a turbine system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 coats of 2K topcoat, solid colour in RAL 3002 Carmine Red as per RAL System 841GL * Wheels in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * No metallic paint available Cjdpfx Asxbmpfoiasrc * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel structure: * Steel structure made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin. Connections in accordance with ISO: * 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connector rail * Electro-hydraulic power pack * Remote steering of axles from the front and rear via cable remote control with push buttons, single-track alignment control (no installation in the tractor unit) * Galvanized folding supports under the rear slope of the loading platform * 1 pair of recessed lashing rings along the central beam at the rear in the sloped section (LC 10,000 daN) * On the gooseneck, plug-in aluminium side and rear panels, approx. 2,440 x 400 mm (L x H) * Rear removable galvanized stanchions (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the sloped gooseneck section * 3 pairs of WADER container pockets in loading area for a 20' (30?) or

Stanje: novo, največja dovoljena obremenitev: 36.360 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Neck (Gooseneck): * Gooseneck with front corners tapered approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square profile climbing strips approx. 15 x 15 mm as well as lower-width extensions * Between the first and second axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) – max. point load 5 t/each * Recess in the bevel as well as projecting into the loading area for excavator dipper stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cutouts in the outer frame of the loading area for fastening ratchet straps (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm hardwood covering * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Crodpfx Aisyhkq Ujasc Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final painting with 2 coats of 2-component topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL 841GL system * Rims in silver grey Including the following additional equipment: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Rear electro-hydraulic unit, under the loading area * On the gooseneck, aluminium side and rear plug-in walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the tapered gooseneck * 2 pairs of WADER container pockets in the loading area for one 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * 3 additional pairs of removable, galvanized covers over the wheel recess – max. point load 3.5 t/pc * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hang-in intermediate table, approx. 300 mm wide * Interm

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable Cjdpfx Aieyhkrrjaerc * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: Credpfx Aisyhkqzeaec * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Cedpfxsyhkqns Aiasrc Below is an excerpt from the equipment list. Full specification available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit * 4 pairs of hanging la

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) Crjdpfjyhkqujx Aiajc - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: novo, lastna masa: 6.350 kg, največja dovoljena obremenitev: 38.650 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Loading Platform: - 2 pairs of folding external lashing rings (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), lift/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system compliant with EU regulations featuring EBS-E (2S2M) Paintwork: - Premium and durable corrosion protection of the standard grit-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paintwork not possible Steel Construction: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting: 24 volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets - Connection standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection bar - 4 wheel chocks with holders Crodpfxsiu Etkj Aiaec - 2" king pin - Galvanized steel front wall approx. 1,600 mm high, EN12642-XL - White reflector tape according to EU regulations, lateral and rear red - European reflective panels (red-yellow) at the rear of the trailer - Loading platform with approx. 30 mm thick hardwood flooring, framed in omega profiles - 10 pairs of stanchion sockets for 100 x 50 mm plug-in stakes in the outer frame - 3 pairs of transverse stanchion rack strips, fitted in the loading platform, for 100 x 50 mm plug-in stakes - Bracket for 1,000 mm plug-in stakes, rear in the central beam - 1 spare wheel carrier under the loading platform on the right hand side - 1 mudflap at the rear of the trailer - Manual and description on USB stick - Bracket for beacon at the rear of the trailer - Holders for warning signs including socket at the gooseneck and left/right rear panel - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load diagram - HRM (High Resistance Metallisation) of the outer frame - Complete steel structure is grit blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot coating

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Tires 385/65 R 22.5 Braking system: Crodsikyh Hjpfx Aiaoc WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Cedpfei Dwlwox Aiaerc Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° Cedpouqlmnsfx Aiajrc - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams Credpsvy Edcjfx Aiajc - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Crsdpfxsunraps Aiasc Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually Credpfxetvfkfs Aiaec - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, največja dovoljena obremenitev: 33.750 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our full inventory of immediately and short-notice available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm - Gooseneck hydraulically lift/lower and detachable - Technical fifth-wheel load: 23,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines protected within the extendable beams, automatically adjusting to bed length - 5 pairs of lashing rings, outward folding (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for screw-mounted RUD rings Rear undercarriage: - Rear chassis with closed outer frame, checker plate surface, continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, outward folding (LC 10,000 daN) - 1 pair of flat lashing rings in the recess LC 16,000 daN - 1 pair of flat lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced steering - Burst protection valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for secure positioning when raised - Final painting of axles with 2 coats of 2-component paint, single color in FAY grey 34-0260 - Technical axle load: 12,000 kg each, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion, load index (146/146F) TPMS: - TPMS tire pressure monitoring system according to ECE R 141 Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, 24V ASPÖCK-NORDIK (ASS3) lighting - All LED side marker lights flash with indicator - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Credpfx Ajxbmn Ueiaoc Paintwork: - Complete steel structure automatically shot-blasted with a blast wheel system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire chassis using ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL system 841GL Including the following additional features: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Rear and front axle steering via cable remote control with push buttons and single track control of axles (without installation in tractor unit) - Electro-hydraulic unit - 2 pairs of bolted container locks on the outer beams. Including 2 pairs of container fastenings for 1x 20' or 1x 40' container - On the gooseneck, plug-in aluminum side boards and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stakes are removable

Stanje: rabljeno, največja dovoljena obremenitev: 39.780 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2027, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from equipment. Full equipment list available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with chequer plate flooring Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyres 205/65 R 17.5 twin-mounted Axles: * BPW axles, two rigid axles, two steering trailing axles, air suspension, drum brake with raise/lower function * Steering trailing axles equipped with electro-magnetic reverse lock, activated by reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connections to the tractor unit Steel Construction: * Steel construction made of high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, provided by a two-component zinc-rich primer * High-quality, single-color two-component top coat in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Wheels in silver Electrical System: * Electrical system in accordance with EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Included Accessories: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Provision at rear of gooseneck for ALU loading ramps * Galvanized folding supports under the sloped section of the platform * Holder for a warning beacon at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mountings for warning boards left and right on the gooseneck and rear panel, including power socket Cedpex Uvlrjfx Aiaorc * One mudflap at the rear of the trailer * Manual and description on USB stick * European reflective signs (red-yellow) at the rear of the trailer * 80 km/h speed stickers at the rear and on both sides * Acoustic reverse warning signal * Load gauge for determining axle loads, including load diagram

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements Cjdpfx Aisrgzv Nsaorc * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck Cjdpfx Aev Sw E Aoiajrc * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings Crjdpfjxtc Uhex Aiajc - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS Csdpfew Tpq Djx Aiaorc - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: Codsxf Silspfx Aiaorc - Rear running gear in short version with closed outer frame and tread plate cover - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: novo, največja dovoljena obremenitev: 91.640 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook connection front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 430 mm, beam width: approx. 1,350 mm * Load height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical pin-lug coupling for attaching a lowbed at the front, end traverse at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) guaranteeing optimal corrosion protection * Final coating with 2 coats of 2K paint, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU sideboards and tailboard, approx. 400 mm high, anodized, for installation on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck Crsdpfsuvbdtox Aiaec * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication for a 3-axle chassis * One 7-pin socket left and right at the rear of the front bogie for warning plates * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * The steel mats can be inserted in 2 positions to create a lowered loading area. Please refer to the respective load diagram for the load capacity, depending on extension width * Steel mats with rubber covering approx. 12 mm thick * One 7-pin socket left and right, front and rear on the rear bogie for warning plates * BEKA-MAX central lubrication for a 5-axle chassis * Rear bogie with socket for cable remote control for steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) Cedpfotx Nwnox Aiajrc LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional