Skladiščni Kontejner, Rabljen, 3 M Širok nakup rabljenega (57.713)

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning plate sets front & rear * Contour tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon rear * 24 V - 15-pin and additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, continuously height-adjustable * Powder-coated steel toolbox and spare wheel holder, basket design, right side * Front closed single plastic mudguards * Rear straight steel mudflaps, each with spray suppression (anti-spray) * Side underrun protection * Extended offset bend by 500 mm to the front * Turntable platform extension at the front by 520 mm with 45° corners and 3 integrated lockable storage compartments with covers * Chassis made from high-strength fine-grained steel Dkodpfxerczm Dj Aqqor * Decking above turntable platform from 50 mm softwood and on low loader platform from 60 mm softwood * Outer planks of loading ramps made from 50 mm bamboo wood * Four stake pockets per side (but no stakes included), each with a 2 t lashing point * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; front and rear, one pair of lashing rings (13.4 t) each on outer frame; four pairs of swivel and lowerable lashing rings (10 t) per side, loadable in all directions and integrated in the outer frame; two pairs of lashing rings (6.4 t) per side in excavator stick recess; eight pairs of galvanized folding outriggers for 3 m total width (not on the rear slope) * Widening planks stored on the left side in stowage compartment * Excavator stick recess above rear axle up to end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp movement on slide pipe from ramp shaft * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, turntable, loading ramps and mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2150, lastna masa: 5.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2016, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 1.310 mm, barva: srebrn, Leto izdelave: 2016, Oprema: ABS, Kempf aluminijasta termo kesona s jeklenim šasijem, 27 m³, dvižna os, rolo ponjava, podest, zložljiva zaščita proti podletu, BPW osi z disk zavorami, nemška polprikolica. Prodaja samo za podjetja in brez kakršnegakoli jamstva. Dostavljamo v katerokoli nemško pristanišče. Dedpfx Aox Rrfmeqqskr

Stanje: rabljeno, prevoženi kilometri: 396.327 km, moč: 316 kW (429,64 KM), prva registracija: 06/2016, vrsta goriva: dizel, velikost pnevmatike: 13R22,5, konfiguracija osi: 6x4, medosna razdalja: 4.700 mm, gorivo: dizel, barva: oranžna, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, dolžina tovornega prostora: 6.400 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2016, Oprema: električno upravljanje oken, klimatska naprava, žerjav, Pogonski sklop Pogon: kolesa Konfiguracija osi Dimenzija pnevmatik: 13R22,5 Vzmetenje: listnato vzmetenje Zadnja os 1: dvojna guma Zadnja os 2: dvojna guma Teže Lastna teža: 15.000 kg Dkodpfx Aqjyna E Usqor Nosilnost: 11.000 kg Skupna dovoljena masa: 26.000 kg Funkcionalno Dvižni steber: teleskopski (4-deleni) Znamka nadgradnje: HIAB = Dodatne možnosti in oprema = - PTO

Stanje: rabljeno, skupna masa: 16.000 kg, prva registracija: 02/2016, dolžina tovornega prostora: 7.310 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, KRONE cerada nadgradnja Portalna vrata zadaj Tla v dobrem stanju Privezne zanke na zunanjem okviru Dsdpeyiikmjfx Aqqskr Fiksna streha Urejeno stanje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, barva: sivo-črna, skupna masa: 15.000 kg, največja dovoljena obremenitev: 13.200 kg, lastna masa: 1.800 kg, prostornina tovornega prostora: 10 m³, širina tovornega prostora: 2.350 mm, dolžina tovornega prostora: 5.500 mm, višina nakladalnega prostora: 800 mm, Dear Sir or Madam, We are offering new 10m³ containers from our own production for sale. The containers have the following features: - Manufactured according to DIN 30722-1 - Lifting bar with 50mm diameter - Hook height: 1570mm - Internal length: 5,500mm - Internal width: approx. 2,300mm - Internal height: 800mm - Floor made of 5mm S-235 steel - Side walls made of 3mm S-235 steel - Plates and profiles continuously welded - Construction largely free of tension bracing - Floor brace spacing: approx. 350mm - Upper rail made of S-355 special steel - Continuous lashing hooks along the sides - Exterior rollers greasable and replaceable Dkedpfeza U Hkjx Aqqor - Warning markings in accordance with §32 (1) StVO & DIN 67520 - Gross weight: 15,000kg - Tare weight: approx. 1,800kg - Payload: approx. 13,200kg - All steel sourced from Thyssen Krupp - All steel parts are automatically shot-blasted prior to processing - Double zinc phosphate primer coat with 120 μm - 2-component paint finish in RAL 7016 with 80 μm - 6x 5t lashing eyes in the floor - 2x 7t lashing eyes on the front wall (inside) - Drive-over spring-loaded swinging flap - Incl. nameplate & container inspection according to DGUV Rule 114-010 (formerly BGR 186) - Unit price: €5,500.00 plus VAT - Also available in 6m length from stock Nationwide delivery available at additional cost. If you are interested in other roll-off container products, please feel free to contact us at any time. Errors and prior sale excepted.

Stanje: rabljeno, lastna masa: 8.400 kg, največja dovoljena obremenitev: 15.600 kg, skupna masa: 24.000 kg, prva registracija: 08/1993, naslednji pregled (TÜV): 10/2022, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 9.5R 17.5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 9.5R 17.5, velikost zadnje pnevmatike: 9.5R 17.5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Kontaktna oseba prodaja: Frank Rau / ruščina / angleščina / nemščina - Bachar Ibrahim / arabščina / angleščina / nemščina - Registracijska storitev, HU/SP/UVV, prevoz do pristanišča Zelo dolga nakladalna površina. 10,00 m! Hidravlične rampe Dkodpfx Aoww Dwheqqsr Stanje: pripravljen za uporabo Razširljiv Sivo-črna Dodatna oprema ABS, vrtljiva plošča, zračna zavora, EBS, zračno vzmetenje, cena na zahtevo (Mobile), Vzmetenje: zrak, Nosilnost (kg): 15600 Tip nadgradnje: razširljiv, vrhunsko stanje, 10,00 m nakladalne površine, HSN/TSN: 6631/000 Pridržujemo si pravico do napak.

Stanje: novo, največja dovoljena obremenitev: 30.040 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.400 mm, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, Kempf SKM 36/3 AK Aluminium Tipper 55 m³ Washing device available as an option, see photos. Surcharge: €8,500 net Type: Kränzle Starlet 4 – Loading length: 9,500 mm – Loading width: 2,430 mm – Body height: 2,400 mm – Body volume: 55 m³ – SAF axles with disc brakes – 1st axle liftable Djdpfsw Umrnjx Aqqekr – Aluminium air tanks – Aluminium landing legs – 2 plastic toolboxes – Aluminium ladder, 4,000 mm long – Working platform with access – Foldable underrun protection – LED lighting – 2x work lights – Cargo area lighting – Tyres: 385/65 R22.5, ALCOA aluminium rims – Wabco brake system – Hyva tipping cylinder – Loading pressure gauge – ECAS system – Front wall 20° angle – Floor thickness: 7 mm – Grain chute – Dust sack – Mount for shovel and broom – Roof roll tarp – Water tank, 30 litres – Chassis: RAL 9005 deep black – Body: RAL 9006 white aluminium For further information, we are at your disposal.

Stanje: rabljeno, prevoženi kilometri: 758.000 km, moč: 382 kW (519,37 KM), prva registracija: 11/2015, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 12/2025, zavore: retarder, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, * Scania CD radio * Second sleeper berth * Refrigerator * Stationary air conditioning * Auxiliary heater * Radio transceiver ----* Adaptive cruise control (ACC) * Hill start assist * Lane departure warning system * Brake warning system * Differential lock on rear axle ----* 3-level KA-BA livestock body * Lifting roof * Drinking system Djdpfx Aewfzqueqqskr * 1st floor: 6.01m x 2.45m = 14.72 m² * 2nd floor: 5.85m x 2.31m = 13.51 m² * 3rd floor: 5.85m x 2.25m = 13.16 m² ----Internal vehicle number: 8279 Vehicle images are not current. New ones will be provided. ----Subject to errors and prior sale.

Stanje: zelo dobro (rabljeno), moč: 36 kW (48,95 KM), vrsta goriva: dizel, barva: rdeča, Leto izdelave: 2023, obratovalne ure: 7 h, Year of manufacture: 2023 Number of cylinders: 3 Dkedpfx Aozfh Rfsqqer Unladen weight: 2,850 kg CE marking: yes Technical condition: very good Visual condition: very good Damage: none

Stanje: zelo dobro (rabljeno), moč: 36 kW (48,95 KM), vrsta goriva: dizel, barva: rdeča, Leto izdelave: 2023, obratovalne ure: 61 h, Year of manufacture: 2023 Number of cylinders: 3 Unladen weight: 2,850 kg Dimensions (L x W x H): 450 x 150 x 235 cm CE marking: yes Technical condition: very good Djdpfx Aqezfh N Ioqekr Visual condition: very good Damages: none

Stanje: zelo dobro (rabljeno), moč: 36 kW (48,95 KM), vrsta goriva: dizel, barva: rdeča, Leto izdelave: 2022, obratovalne ure: 27 h, Year of manufacture: 2022 Number of cylinders: 3 Unladen weight: 2,600 kg Dkodpfx Aqszfh A Ujqsr Dimensions (L x W x H): 365 x 110 x 220 cm CE certification: yes Technical condition: very good Visual condition: very good Damage: none

Stanje: rabljeno, moč: 37 kW (50,31 KM), vrsta prenosa: drugo, vrsta goriva: dizel, barva: rumena, skupna masa: 4.700 kg, lastna masa: 4.260 kg, največja dovoljena obremenitev: 440 kg, konfiguracija osi: 4x4, število sedežev: 1, prva registracija: 01/2000, zavore: drugo, Leto izdelave: 2000, obratovalne ure: 6.320 h, voznikova kabina: dnevna kabina, medosna razdalja: 1.950 mm, Oprema: dodatne luči, kabina, pogon na vsa štiri kolesa, vilice za palete, * German machine Dsdpfx Ajzcbumsqqjkr * 6,320 operating hours * All-wheel drive * Condition as per photos * Articulated Komatsu WA 63-3 * Turning radius: 3,640 mm * Articulation angle: 40° * Hydraulic 4-point quick coupler * Loader bucket: 0.7 m³ – bucket width: 1,850 mm * Bucket pivot height: 3,115 mm * Planetary rigid axles with automatic locking differentials on both axles * EasyDrive (hydrostatic drive) (SN) * 1st travel range: 0 – 5.6 km/h | 2nd travel range: 0 – 20 km/h * Hydrostatic steering * Hydraulic working pressure: 200 bar * Servo-controlled hydraulic operation * Towing device * ROPS and FOPS comfort cab * Double-door safety driver's cab, compliant with DIN/ISO * User-friendly operation via multifunction joystick * Comfort driver's seat * Delta lifting frame * Sliding window, right side * Heater * Heated rear window * Full all-round glazing * Optimized sound insulation * Engine: Komatsu type Komatsu 4D 94E – 37 kW – 2,775 cc * Easy maintenance * Wide-opening engine hood * Side maintenance hatch * Wheelbase: 1,950 mm * Track width: 1,450 mm * Weight: 4,700 kg If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Further trucks are available on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the equipment to prevent any misconceptions regarding the condition and suitability for the buyer. Inspections and checks are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: rabljeno, skupna masa: 120.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/1999, Goldhofer STHP-ET Gooseneck Main Features - Turntable-mounted fifth wheel plate, 3.5" king pin, and adjustable steering wedge - Built-in hydromechanical dual-circuit steering for pendulum axle steering (2-circuit, 4 hydraulic cylinders) - Hydraulic lifting and lowering function including support cylinders - Hydraulic differential lock - Engineered loading platform (approx. 3,700 x 2,440 mm) with anti-slip tread plate covering - Designed for a technical fifth wheel load up to 30 tons - Steering radius of 2,800 mm for use with a 4-axle tractor unit - Coupling height loaded: 1,350 mm - Aluminium side walls (400 mm high, all around) Goldhofer Heavy Duty Modular Trailer Type THP/ET 3 - Load length 4,200 mm x 2,750 mm - Loading height 1,250 mm; longitudinally and laterally combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Bolt-on coupling optimized at front and rear for longitudinal combinations - Two single-tyre pendulum axle bogies, 4 wheels per axle line - Axle bogies mounted to vehicle frame using turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas reservoir suspension, and hose rupture safety valves on all axle bogies - Integrated hydromechanical 2-circuit forced all-wheel steering with up to 60° steering angle per axle bogie - 2-line all-wheel compressed air brake system and spring-loaded parking brake - Hydraulic locking pins - Unladen weight approx. 8,000 kg - BPW Axles Technical Data Technical axle load per axle line: at 5 km/h - 23,000 kg, at 50 km/h - 14,100 kg, at 80 km/h - 12,600 kg Djdpfx Aqowuixfsqokr Goldhofer Kessel Bridge, 75 t. Payload, THP-ET Extendable Beam Bridge hydraulically widenable, 75,000 kg payload Base width 2,990 mm, hydraulically expandable to 4,640 mm Total bridge length 9,900 mm Inner length approx. 7,500 mm Technically extendable by approx. 5,500 mm Beam dimensions: Length: 7,500 mm + 5,500 mm Height: 500 mm; Width bottom: 470 mm; Width top: 320 mm Goldhofer Heavy Duty Modular Trailer Type THP/ET 5 - Load length 7,000 mm x 2,750 mm - Loading height 1,250 mm; longitudinally and laterally combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Bolt-on coupling optimized at front and rear for longitudinal combinations - Two single-tyre pendulum axle bogies, 4 wheels per axle line - Axle bogies mounted to vehicle frame with turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas suspension, and hose rupture safety valves on all axle bogies - Integrated hydromechanical 2-circuit forced all-wheel steering with up to 60° steering angle per axle bogie - 2-line all-wheel compressed air brake and spring-loaded parking brake - Hydraulic locking pins - Unladen weight approx. 13,000 kg - BPW Axles Technical Data Technical axle load per axle line: at 5 km/h - 23,000 kg, at 50 km/h - 14,100 kg, at 80 km/h - 12,600 kg

Stanje: rabljeno, Leto izdelave: 2022, Namen uporabe: Gradbeništvo Pogon: Kolesa Lastna teža: 749 kg Znamka motorja: Kubota Dimenzije tovornega prostora: 229 x 135 x 155 cm Serijska številka: APP866746 Za več informacij se obrnite na PFEIFER GROUP. Dksdpfoya Tx Eox Aqqor

Stanje: rabljeno, Leto izdelave: 2015, Payload: 31,899 kg Gross vehicle weight: 7,101 kg Front tire condition: 80% Rear tire condition: 80% Front tires: - Rear tires: - Dksdpfx Aoyaxazjqqjr Contact PFEIFER GROUP for further information.

Stanje: novo, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Drawbar height adjustable by 300 mm Dedpfx Ajy U A Eleqqjkr * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-measurement approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning boards front and rear * Landing gear at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container outside width) and lockable, locking dimension retracted to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension not to DIN) with an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm - five 3 t UVV lashing brackets installed on each side * In each front and rear corner, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor, rear in the end cross member) * Various drill holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair aluminium slide-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair) suitable for rubber-tyred and tracked vehicles * Rear stowage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. CW 38/2026

Stanje: novo, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in dimension B: approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system, 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * Tire pressure monitoring system (TPMS) ----General Fittings: * Mechanically adjustable 3-metre warning panel sets, front and rear * Support winch (front) * External foldable support legs (rear) * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted left and right * Side underrun protection * Rear underrun protection * Quarter mudguards (plastic) ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container external width), lockable – locked to ISO - DIN 15190 = 2,259 mm, extended = 2,819 mm (this measure is not to DIN), for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation possible for 3 t drop lashing rings every 600 mm. (5 x 3 t UVV-certified lashing rings per side) * In the front and rear corners, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various drilling holes for 1.2 t lashing points in the front wall and rear crossmember ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t/pair) – suitable for rubber-tyred and tracked vehicles * Storage compartment at the rear, recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- Dedpfx Aqoy U A Efoqjkr * Axles, air tanks, front support winch and flange towing eye painted black ----Further Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. calendar week 38/2026

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes Djdpsv D Tbdefx Aqqjkr ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lower function ----Drawbar / Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * Drawbar shortened by approx. 200 mm to about 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (actuated via reverse gear) * 1 removable LED beacon incl. bracket at the rear * Tire Pressure Monitoring System (TPMS) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing leg at the front * External fold-down supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm – laterally, 5 x 3 t UVV-compliant lashing rings installed per side * At the front and rear corners 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front wall and end cross member for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment under the loading area, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear support elements hot-dip galvanized--- * Axles, air tank, front landing leg, and flange towing eye painted in black ----Other information: * Brand-new vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 39/2026

Stanje: rabljeno, številka stroja/vozila: XMR0SD0004000xxxx, Leto izdelave: 2004, Prosimo, navedite referenčno številko ob povpraševanju: 23254 Dsdpfxozqmtie Aqqekr Specifikacije: Letnik modela: 2004 Dolžina: 1339 cm Spodnja raven: 920 cm Zgornja raven: 410 cm Podaljšek: 6 metrov Medosna razdalja: 136/205 cm Vse kar je odvisno od naših načrtov vključeno Pnevmatike (glej slike) Lastnik meni, da ima vse potrebno. Podstrešje Zasuk Pripravljeno za dostavo TÜV: Da EU homologacija do: 31.08.2026 Lastna teža: 11.140 kg Model: Nootboom 3-osna prikolica za stroje z izvlečkom, stranicami in klini = Več informacij = Za več informacij se obrnite na ATS Norway.

Stanje: rabljeno, prevoženi kilometri: 111 km, moč: 110 kW (149,56 KM), prva registracija: 05/2026, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, število sedežev: 3, dolžina tovornega prostora: 3.280 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, centralno zaklepanje, filter saj, klimatska naprava, * SCATTOLINI elektrohidravlični tristranski kiper * Dimenzije cca. 3280 x 2100 x 400 mm * Skupna masa 3500 kg * Nosilnost 802 kg * Avtomatska klimatska naprava * Diferencialna zapora na zadnji osi * Dvojni DIN radio s prostoročnim telefoniranjem * Kljuka za prikolico z kroglasto glavo * Dovoljena priklopna masa 3500 kg * Medosna razdalja 2500 mm * Dostava možna znotraj Nemčije * Po dogovoru pripravimo tudi ponudbo financiranja – tudi z daljšo dobo odplačevanja! * Vaša neposredna kontaktna oseba je g. Willi Schmidt Dsdexfyr Uspfx Aqqokr

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear Dsdpjl Th Evjfx Aqqekr * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Warning sign packages, front and rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V 15-pin as well as additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on right side * Enclosed single plastic mudguards at the front * Straight steel mud flaps at the rear each with splash protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm forward * Kingpin platform extension by 520 mm with 45° angled corners and 3 recessed lockable storage compartments with lid * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm and in low-bed platform made of 60 mm softwood * Outer boards of the drive-on ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included) with integrated 2 t lashing point * Load securing package (Lasi package) including: 2 lashing eyes (6.4 t) front left/right on the main frame of the turntable platform; on both sides, front and rear, 1 pair of 13.4 t lashing rings on the outer frame, 4 pairs per side of 10 t swivel and drop lashing rings, loadable in all directions and integrated into the outer frame; 2 pairs of 6.4 t lashing rings per side in the excavator stick tray; 8 pairs of galvanized folding extensions for total width of 3 m (not at the rear angled section) * Side extension planks stored on the left in a compartment * Excavator stick rest above rear axle up to the end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic, hot-dip galvanized drive-on ramps approx. 3,000 x 720 mm * Hydraulic side ramp shifting on sliding tube from ramp axle * Loading area above kingpin: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, kingpin platform, drive-on ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and kingpin painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 34.000 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 10/2009, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 3.750 mm, skupna širina: 2.500 mm, skupna višina: 3.750 mm, Leto izdelave: 2009, Oprema: ABS, Zelo dober 3-osni nizkopodna prikolica Langendorf SATH 30/34 z ugrezi za kolesa, dvojno zložljive nakladalne rampe, tovorna površina 7.400 mm, sprednja ploščad 3.650 mm, zadnja ploščad 4.580 mm, od škripca do konca vozila 14.890 mm, nizko ležeča nakladalna postelja pribl. 500 mm in še več. Popolna nizkopodna prikolica za prevoz bagrov, tovornjakov in seveda viličarjev. Dksdpfxowy E Nde Aqqor

Stanje: rabljeno, moč: 54 kW (73,42 KM), vrsta goriva: dizel, Leto izdelave: 2004, obratovalne ure: 4.573 h, CAT TH 350 B Dksdsy D Ua Hjpfx Aqqor 4-valjni Perkins motor, 74 kW Transportne mere D: 5,30 m Š: 2,44 m V: 2,50 m Interna številka: 26T005 KABINA SERVO VOLAN ZAŠČITNA STREHA = Dodatne informacije = Lastna teža: 10.150 kg Nosilnost: 3.000 kg Skupna dovoljena masa: 13.150 kg Delovna višina: 1.100 cm

Stanje: rabljeno, največja dovoljena obremenitev: 29.340 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2016, naslednji pregled (TÜV): 05/2025, Oprema: ABS, * Kempf 3-axle tipping trailer 27m³ * Air suspension * Lift axle * Aluminium rims * BPW axles * Rolling tarpaulin Dsdpfx Aovdyzqoqqekr * Unladen weight 5,660 kg * GVW 35,000 kg

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper Dksdpfx Aqehlz S Njqjr • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)