Alpsan 56T, Hydr. Rampen, Verbr. Auf 3M nakup rabljenega (5.947)

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization Iedpfx Aetplwfoicoau * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) * Extension boards stored in a compartment under the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 19/2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: Iajdpfx Aspk D I Aoiceu * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: rabljeno, največja dovoljena obremenitev: 38.048 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2020, Oprema: ABS, Kaessbohrer LB3E polpriklopnik nizke izvedbe s hidravličnimi rampami Prva registracija Isdpfx Aiey Eupwscjau BPW Eco Plus osi Dvižna os Bobnaste zavore z ABS in EBS Zračno vzmetenje Pnevmatike: 245/70 R17,5 40/45% Skupna masa: 48.000 kg, Lastna masa: 9.952 kg, Nosilnost: 38.048 kg. Dolžina labodjega vratu: 3,95 m Dolžina nizke ploščadi: 9,24 m Širina: 2,55 m + 2x30 cm Višina nakladalne površine: 89 cm Hidravlične rampe s stranskim pomikom Zadnje podporne noge Privezni obroči Žepi za kole Pridržujemo si pravico do napak/opisnih napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 38.050 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2018, Oprema: ABS, Kaessbohrer LB3E polpriklopnik nizkopodni z hidravličnimi rampami Prva registracija BPW Eco Plus osi Dvižna os Bobnaste zavore z ABS in EBS Zračno vzmetenje Pnevmatike: 245/70 R17,5 35/40% Skupna masa: 48.000 kg, Lastna teža: 9.950 kg, Nosilnost: 38.050 kg Dolžina labodjega vratu: 3,95 m Dolžina nizkega podesta: 9,24 m Širina: 2,55 m + 2x30 cm Višina nakladalne površine: 89 cm Hidravlične rampe s stranskim pomikom Zadnje opore Iasdjy Ngapjpfx Aicsu Privezni obroči Žepi za vložke Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje.

Stanje: rabljeno, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2022, Leto izdelave: 2022, Alga TAT B-180, 7,3 m, rampe, dozvoljena ukupna masa 19 t, niskopodni prikolica, Tiefgänger, 1. vlasnik, dobro održavano vozilo. Tehnički opis: Šasija / Ovjes / Broj osovina: ABS, EBS. Utovarni prostor 7.300 mm, niskopodni dio 6.300 mm, zadnji kosina: 1.000 mm. Bočne stranice aluminijumske, visina 400 mm, mogu se preklopiti, ukloniti, djeljive po sredini (Kinnegrip). 8 veznih ušica po strani, svaka s vučnom snagom do 2t. 2 para sanduka za vezivanje naprijed i nazad, svaki kapaciteta 10t. Vučna rudica podesiva po visini / beskonačno, ±150 mm, vučna kuka 50 mm. Rampa u jednom komadu približno 2.500 mm x 500 mm, potpuno skupljiva. 2 preklopne zadnje potpore. EBS i ABS, “GIGANT” osovine, bubanj kočnice, lisnato ogibljenje. Iajdpfjzamugex Aicsu Bivša neto cijena novog: 32.700,- € Unatoč najvećoj pažnji moguća je greška u oglasu. Zadržavamo pravo na izmjene i prethodnu prodaju!

Stanje: rabljeno, največja dovoljena obremenitev: 24.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1993, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.500 mm, ? Hidravlične podporne noge ? Kolesne vdolbine ? 3 žepki za stebričke na vsaki strani ? 4 pritrdilne ušesce na vsaki strani ? Hidravlične rampe ? Bobnasta zavora Ijdpfsxuykiex Aicoau ? Zračno vzmetenje ? Dvojna pnevmatika ? SAF osi Vse informacije brez garancije / Vmesna prodaja pridržana.

Stanje: rabljeno, lastna masa: 9.600 kg, največja dovoljena obremenitev: 38.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2012, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, barva: srebrn, Leto izdelave: 2009, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German trailer * 1st owner * Condition as shown in photos * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra-long ramps * Ramps hydraulically and laterally adjustable * Loading length: 8.80 m x 2.50 m * Loading height: 0.85 m * SKF axles * 2 support legs * Steerable trailing axle * Leaf/air suspension with lift/lower function * Heavy-duty lashing eyes according to DIN * EBS (Electronic Braking System) * ABS (Anti-lock Braking System) * Tool/storage box * Twin tyres * Gross vehicle weight possible: 48,000 kg * Unladen weight: 9,600 kg * Payload: 38,400 kg If you require a new TÜV inspection, we are happy to provide an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Isdpfx Aowxm Iljicsau Note: We offer and strongly recommend an inspection and assessment of the goods, so that the buyer has a realistic understanding of condition and suitability. Viewing and inspection are possible at any time by appointment and are explicitly encouraged. All information provided without guarantee. We accept no liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 157 kW (213,46 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, skupna masa: 15.800 kg, obratovalna teža: 15.800 kg, velikost pnevmatike: 20.5 R-25 L3, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, konfiguracija osi: 4x4, število sedežev: 1, prva registracija: 09/2024, naslednji pregled (TÜV): 09/2026, emisijski razred: Euro 5, prostornina žlice: 2,8 m³, širina izkopne žlice: 2.990 mm, Leto izdelave: 2023, obratovalne ure: 300 h, gradbena višina: 3.390 mm, gorivo: dizel, številka stroja/vozila: L0000424, Oprema: UVV varnostni pregled, dodatne luči, filter saj, hidravlika, kabina, klimatska naprava, nadzor oprijema, pogon na vsa štiri kolesa, računalnik na krovu, spojka prikolice, standardna žlica, zapora diferenciala, Demo machine – Rental unit – Fully equipped Operating weight: 15,800 kg Bucket capacity: 2.8 m³ Cab height: 3,390 mm Overall width (bucket): 2,750 mm Total length (on ground): 6,430 mm Tipping load: 11,350 kg Tyres: 20.5 R25 L3 Features: * CUMMINS B6.7 engine, emissions standard Stage 5 * Fuel pre-heater * 5-speed powershift transmission with torque converter * Transmission oil cooler * Hydraulic front axle differential lock * Foot switch-operated diff lock * Hydraulic oil cooler * Joystick control * MCV with 3 hydraulic circuits * Auxiliary hydraulics * Emergency steering * LED entry lighting * Comfort cab, ROPS/FOPS certified to ISO 3471 * With air conditioning and heating * Front and rear wipers with interval function and washer system * Air-suspended, heated seat * Adjustable and tiltable steering column * Sun blind * Tinted safety glass * Radio/USB player * Reversing camera * Keyless start * 4x LED work lights front and rear * Front and rear mudguards * Hydraulic ride control * Includes 2.8 m³ earth bucket * Bolt-on cutting edge, * Hydraulic quick coupler, ISO Volvo All prices plus 19% VAT. Subject to change, errors, misprints, and prior sale. Iaodpfx Ajq Hfa Toicou

Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan Skupna masa 24.000 kg / 30.000 kg Nosilnost 17.920 kg / 23.920 kg Lastna teža 6.080 kg Skupna dolžina 10.900 mm Nakladalna dolžina 8.680 mm Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom Parabolično vzmetenje Dolge rampe 2.800 mm s hidravličnim upravljanjem Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton 5 parov žepov za nosilce Vlečni obroč 40 mm plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto Iaodsxb Nmyjpfx Aiceu Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV. Mesečna najemnina: 500,00 EUR

Stanje: rabljeno, največja dovoljena obremenitev: 21.660 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/1994, dolžina tovornega prostora: 11.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.400 mm, skupna širina: 2.550 mm, Vozilo / Nadgradnja: Polpriklopnik Prva registracija: 03/94 Skupna teža: 28.000 kg Lastna teža: 6.340 kg Nosilnost: 21.660 kg Skupna dolžina: 12.220 mm – 14.220 mm Dolžina nakladalnega prostora: cca 11.900 mm – 13.900 mm Širina: 2.550 mm / Nakladalna širina cca 2.500 mm Višina nakladanja: cca 1.400 mm Dodatne informacije: - Prednja stena 950 mm - LED vzvratne luči - 1. os je dvižna - Obremenitev agregata 18.000 kg Iodpfx Aoyn Uzwoicsau - Hidravlično izvlečni zadnji izvlek - 2 m teleskopski izložni krak - Priključna mesta za kole in kole - Zračno vzmetenje - 6 parov priveznih obročev - 2x plastična škatla za orodje - Višinsko nastavljive sredinske podporne noge - Zaščita podvozja - BPW osi Vozilo je lahko polepljeno in/ali potiskano z oglasnimi napisi

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 7.836 h, Oprema: pogon na vsa štiri kolesa, Hidravlični sistem za hitro menjavo, žlica približno 3,8 m³, centralno mazanje, klimatska naprava, kamera, vozilo je lahko oblepljeno in/ali opremljeno z reklamnim napisom SI86045 Naša ponudba je načeloma brez novega TÜV pregleda. V primeru želje po novem TÜV pregledu vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko oblepljeno in/ali opremljeno z reklamnim napisom. Veljajo naši splošni pogoji dobave in plačila. Iaodpfxew A Utqe Aicsu Za ta objekt vam z veseljem pripravimo ponudbo za financiranje ali leasing. Prosimo, kontaktirajte nas!

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 5.081 h, Oprema: pogon na vsa štiri kolesa, Nakladalna žlica cca 1,8 m³, hidravlični hitri menjalni sistem, paletne vilice, dobro ohranjeno, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Iaedpfxjxb Id Ro Aicju SI86211 Naša ponudba je načeloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam jo lahko ponudimo prek naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni dobavni in plačilni pogoji. Za ta predmet vam z veseljem pripravimo ponudbo za financiranje ali leasing. Kontaktirajte nas!

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight Iajdol Th I Aopfx Aiceu ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible Iodpfjl Th Nnsx Aicoau * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release system for spring-type brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin power connector * LED lights, 12/24 V * RDÜ tire pressure monitoring system ----General Fittings: * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Preparation at the front bulkhead and rear slope for retrofitting container locks for 20'' container transport * Version: 21 t gross vehicle weight with reinforced chassis and axles * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation at the front bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Split sidewalls made of trapezoidal-profiled steel sheet, foldable with folding stakes in the center * Steel rear wall, insertable between the ramps (bracket provided inside the front bulkhead when not in use) * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Profifix lashing rail in the longitudinal center axis for lashing up to LC 3000 daN * One 10 t lashing ring in each front and rear corner * Lashing package: two retractable 8 t lashing rings on each side, multiple holes for 1.2 t lashing options in the front and rear crossmember ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single person operation, approx. 3,000 x 620 mm (can be closed down to 20 mm) * Rear drive-on slope approx. 860 mm (chassis) ----Loading Heights: * Unladen: approx. 940 mm * Laden: approx. 910 mm ----Wheelbase / Tyres: * 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Side panels painted in an RAL color of your choice (excluding special or metallic paints), can be changed until about 6 weeks before completion * Drawbar, front bulkhead, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and support winch painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and intermediate sale subject to confirmation * Sample photos Iedpoq Dyu Uofx Aicjau ----Delivery Time: * Available from calendar week 29 / 2026

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 125 kW (169,95 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, skupna masa: 13.700 kg, obratovalna teža: 13.700 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, prva registracija: 09/2024, naslednji pregled (TÜV): 09/2025, emisijski razred: Euro 5, prostornina žlice: 3 m³, Leto izdelave: 2023, obratovalne ure: 135 h, številka stroja/vozila: HNPM000001, Oprema: UVV varnostni pregled, dodatne luči, filter saj, hidravlika, jeklene gosenice, kabina, klimatska naprava, računalnik na krovu, DEMO – Machine with 135 operating hours for only €129,000 - Operating weight: 13,700 kg Iodol Uy Shepfx Aicjau - ROPS/FOPS cab with air conditioning and heating - 3,300 mm PAT dozer blade (six-way), foldable to 2,382 mm - IVECO 4-cylinder turbo diesel engine, 6.7 liters, Stage V, AdBlue - Power: 125 kW – 170 HP - Operating weight 13,700 kg (with ripper + 1,200 kg) - Machine width over tracks: 2,490 mm - Blade width: 3,300 mm - Blade height: 1,305 mm - Ripping depth: 500 mm - Dump height: 600 mm - Blade capacity: 3 m³ - Track shoes: 560 mm - Working hydraulics from Linde Hydraulics, Aschaffenburg: - Electronic control of work hydraulics - Load-sensing variable displacement pump - Return line filtration in tank - Blade vibration function - Blade fast-drop function - Blade float position Hydrostatic drive from Linde Hydraulics, Aschaffenburg: - 3 adjustable speed ranges - Automatic parking brake - Electronic overload control - Proportional travel hydraulics joystick - Hydrostatic drive - Machine enable switch - Emergency stop button - Planetary final drives - Seat contact switch 0–10.0 km/h (forward & reverse) All prices plus VAT. More info at klarmann.de/shantui

Stanje: rabljeno, največja dovoljena obremenitev: 36.700 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2004, dolžina tovornega prostora: 14.300 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, Oprema: ABS, Stock No. 5827 Iajdpfxjy T Dlwj Aicju Doll Low Loader Trailer with maximum loading platform of 14.30m / 4 x forced-steered axles / Cable remote control ---- * Manufacturer: Doll * Model: S4H-N * First registration: 04/2004 * Gross vehicle weight: 50,000 kg * Unladen weight according to vehicle registration: 13,300 kg * Payload: 36,700 kg * Axles: 4 x SAF, electro/hydraulic forced steering / drum brakes * Suspension: Air suspension with raising and lowering function * Tyres: 235/75 R 17.5 approx. 50% tread on steel rims * Colour: Grey * EBS Wabco * Low-bed: approx. 9.30m long (+5.00m extension) x 2.50m wide * Low-bed extendable to approx. 14.30m (5m slide-out section) * Low-bed widenable to approx. 2.98m * Loaded platform height approx. 0.90m * Gooseneck approx. 3.60m long * Sliding platform between gooseneck and low-bed * Removable aluminium drop sides approx. 0.40m high * Removable stanchions * Pockets for plug-in stanchions * 3 pairs of lashing points (3.2t) on the gooseneck * 7 pairs of folding lashing rings (3.2t) in the low-bed * Floor: Steel/wood * Toolbox mounted in front of gooseneck * Full load supports at the front * Mechanical supports at the rear * Central lubrication system * Cable remote control for forced steering with connection at front or rear * Extendable warning boards at front and rear * LED reversing lights German trailer!! German documents!! Cable remote control!! Notice regarding possible errors in the advertisement: Despite careful preparation, occasional errors may be present in the description or specifications. No liability is assumed for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna dolžina: 13.400 mm, skupna širina: 2.540 mm, Leto izdelave: 2022, Letnik: 2022 Zadnja os 1: dvojna montaža; profil pnevmatik levo znotraj: 40 %; levo zunaj: 40 %; desno znotraj: 40 %; desno zunaj: 40 % Zadnja os 2: dvojna montaža; profil pnevmatik levo znotraj: 30 %; levo zunaj: 30 %; desno znotraj: 30 %; desno zunaj: 30 % Zadnja os 3: dvojna montaža; vodena; profil pnevmatik levo znotraj: 30 %; levo zunaj: 30 %; desno znotraj: 30 %; desno zunaj: 30 % Lastna teža: 10.770 kg Nosilnost: 34.230 kg Iajdpfey R N Tusx Aicju Skupna dovoljena masa: 45.000 kg Dvojne hidravlične rampe 240 cm + 150 cm Hidravlično pomične z leve na desno Tehnični pregled veljaven do 30.05.2026 Dolžina postelje: 930 cm Obseg vratu: 330 cm Višina tal: 83 cm

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area Iasdpfxetvfkfj Aicou - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: Iaodpfxjuadk Ns Aicsu - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Iasdpfsi Ai E Rsx Aicsu Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: rabljeno, prevoženi kilometri: 265.777 km, moč: 353 kW (479,95 KM), prva registracija: 05/2018, velikost pnevmatike: 315/80r22.5, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, kapaciteta rezervoarja za gorivo: 600 l, zavore: intarder, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2018, Oprema: električno upravljanje oken, klimatska naprava, Dimenzija pnevmatik: 315/80r22.5 Sprednja os: vzmetenje: listnato vzmetenje Zadnja os: dvojna montaža; vzmetenje: zračno vzmetenje Pogon: na kolesa Število cilindrov: 6 Iodpfx Aieuc D Hvecjau Lastna masa: 7.638 kg Nosilnost: 11.362 kg Dovoljena skupna masa: 19.000 kg Znamka motorja: DAF = Dodatne možnosti in oprema = - Hidravlika za kipanje - PTO

Stanje: rabljeno, prevoženi kilometri: 291.853 km, moč: 353 kW (479,95 KM), prva registracija: 04/2018, velikost pnevmatike: 315/80r22.5, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, kapaciteta rezervoarja za gorivo: 600 l, zavore: intarder, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2018, Oprema: električno upravljanje oken, klimatska naprava, Dimenzija pnevmatik: 315/80r22.5 Prednja os: vzmetenje: listnate vzmeti Zadnja os: dvojna montaža; vzmetenje: zračno vzmetenje Pogon: kolo Število valjev: 6 Lastna teža: 7.633 kg Nosilnost: 11.367 kg Iedpoyhftkjfx Aicoau Največja dovoljena masa (zGG): 19.000 kg Znamka motorja: DAF = Druge možnosti in dodatna oprema = - Kiper hidravlika - PTO

Stanje: rabljeno, prevoženi kilometri: 253.419 km, moč: 353 kW (479,95 KM), prva registracija: 05/2018, velikost pnevmatike: 315/80/22,5, konfiguracija osi: 4x2, medosna razdalja: 3.830 mm, zavore: intarder, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2018, Oprema: električno upravljanje oken, Dimenzija pnevmatik: 315/80/22,5 Prednja os: vzmetenje: listnate vzmeti Zadnja os: dvojna montaža; vzmetenje: zračno vzmetenje Pogon: na kolesa Lastna teža: 7.743 kg Nosilnost: 11.257 kg Ijdpfxjuc Ew Nj Aicsau GVW: 19.000 kg = Dodatne možnosti in oprema = - Kiper hidravlika - PTO

Stanje: novo, lastna masa: 390 kg, največja dovoljena obremenitev: 1.382 kg, skupna masa: 1.800 kg, velikost pnevmatike: 195/50r13, NEW with us + at a SPECIAL PRICE: Immediately available Here you'll find the ideal car trailer for your needs! Perfectly suited for transporting smaller vehicles such as Smart cars, ride-on mowers, motorcycles, machinery, and much more! The trailer offers a high payload capacity of approx. 1382 kg, with a permissible total weight of 1800 kg and an unladen weight of approx. 418 kg. Standard features include loading ramps and robust coupling eyes to ensure safe transport of your cargo. Make your transport tasks even easier. This trailer can be equipped with various accessories: - Higher side panels, 30 cm - Winch - 100 km/h road approval - Support legs Long axles positioned under the loading platform = reduced overall width + increased usable space Internal width! Tyres: 195/50R13 Automatic jockey wheel Foldable and removable aluminium sidewalls V-drawbar Ijdpoqwz U Hefx Aiceau Very robust, recessed tie-down points in the platform Phenolic resin-coated anti-slip plywood floor 13-pin plug + safety lighting + reflectors If you have any questions, please send us a message or give us a call! Technical modifications, price changes, errors and prior sale reserved. No liability is accepted for mistakes or typographical errors.