Transportno Delovno Dvigalo nakup rabljenega (3.612)

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 70 h, številka stroja/vozila: GS4615C-14317, Lastna teža: 2.792 kg Dvižna zmogljivost: 318 kg Gbedsy N Niaspfx Acgjl Delovna višina: 1.175 cm Dimenzije tovornega prostora: 241 x 117 x 239 cm Stanje prednjih pnevmatik: 80 Stanje zadnjih pnevmatik: 80 Za dodatne informacije se obrnite na PFEIFER GROUP.

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) Gjdpfxepk D Aws Acgebl * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper buffer * Mechanical drop-down supports at the rear ----Container / Low-bed platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roll grooves in the bogie area * When transporting roll-off containers, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking and mechanically insertable front stop angles in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops fitted with pivoting stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surfacing in the running area of the access slope * 1 pair of aluminium loading ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height, loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape, side and rear * Axles, turntable, drawbar and air tank painted black * Hot-dip galvanized main frame ----Information: * Gross vehicle weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (RDÜ) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with raising and lowering function, equipped with Ride-to-Ride (RtR) valve * Smart-Board as infotool * Lateral underrun protection * Pivoting support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle with closed plastic mudguards, rear axle with straight hot-dip galvanized steel fenders, both with spray protection * Reflective contour marking strips on sides and rear * Folding cover (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights Gbjdpfxel Tpwye Acgjl * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye; height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side, each with 2 t lashing capability * Load securing package includes: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame—13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for up to 3 m overall width (not at the sloped rear end) * Widening planks stowed in the center of the load area * Hydraulic, one-piece, laterally adjustable ramps (approx. 3,000 x 720 mm) * Excavator arm rest, length approx. 2,100 mm from rear axle to end cross-member (2 pairs of 6.4 t lashing rings integrated on the sides of the excavator arm rest) * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp incline) * Chassis, turntable, drawbar, folding extensions, and ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross vehicle weight * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 32 / 2026 * Sample photos

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: Gbjdpfx Acjv Eq Evegel * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm, up to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fittings for retrofitting container locks in front of the headboard and rear slope for the transport of 20" containers * Bolted headboard, smooth sheet * Side walls: folding, split once in the middle, made of trapezoidal sheet metal * Steel rear wall, can be inserted between ramp holders, stored in front of the headboard when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various holes in headboard and end beam for 1.2 t lashing options * Profifix lashing rail in longitudinal axis, central, for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance) * Rear approach slope approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, headboard, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted in black * Side wall panels painted in a RAL colour of your choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS tyre pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Lateral underrun protection * Rear swing-down supports on chassis frame * Mechanically adjustable warning board kits front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with splash guards * Contour tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for toolbox mounted on turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), with integrated lashing options * Load securing package consisting of: 2 lashing points (6.4 t) front left & right on main beam of turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and lowerable, loadable in all directions and integrated into the outer frame—at corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in rear bevel) * Widening boards positioned in centre of loading area * Excavator arm trough over rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of excavator arm trough) * Single-piece hydraulic access ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofit of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black Gjdpjl Thxdefx Acgobl * 235/75 R 17.5 twin tyres * Unladen weight 5,900 kg * Permissible gross weight of 30,000 kg technically possible * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: Gbsdpfoylfvmsx Acgol * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Lateral underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign kits front and rear * Front (closed) plastic mudguards and straight, galvanized steel panel mudguards at the rear, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical socket * Four stake pockets per side (no stakes included), each with integrated lashing points * Load securing package includes: 2 heavy-duty lashing rings (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV folding and retractable lashing rings, loadable in all directions and integrated into the outer frame (corners rated for 13.4 t and otherwise 10 t) * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening planks stored in the center of the loading platform * Excavator arm rest above the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the excavator arm rest) * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable ramps (side shifting) * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach incline) Gjdpfx Acjx Ipb Hjgobl * Chassis, bogie, drawbar, and loading ramps are hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * Technically permissible gross weight: up to 30,000 kg * The vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from approx. calendar week 36/2026 *

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display Gbjdpspk D I Aefx Acgol * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 295 h, številka stroja/vozila: CE800731, dvižna višina: 8.000 mm, Lastna teža: 1.420 kg Dvižna zmogljivost: 230 kg Delovna višina: 777 cm Dimenzije tovornega prostora: 190 x 79 x 198 cm Gjdpey Nv U Asfx Acgobl Stanje sprednjih pnevmatik: 60% Stanje zadnjih pnevmatik: 60% Za več informacij kontaktirajte PFEIFER GROUP.

Stanje: rabljeno, največja dovoljena obremenitev: 10.540 kg, skupna masa: 18.000 kg, konfiguracija osi: 1 os, prva registracija: 05/2009, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.500 mm, Leto izdelave: 2009, Oprema: ABS, Naša ponudba je na splošno brez tehničnega pregleda (HU/AU/SP) in brez registrskih tablic. Gsdpfx Acowb Rwiogsbl Pridržujemo si pravico do napak in vmesne prodaje. Ogled možen samo po predhodnem dogovoru. Na povpraševanja prek WhatsAppa ne odgovarjamo.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2015, Oprema: ABS, Visitez notre site Internet, où vous trouverez l'intégralité de notre stock de véhicules avec de nombreuses autres photos et informations disponibles en plusieurs langues. SEL 8523 Schmitz Cargobull SCS 24/L 13.62 EB Essieu relevable Immatriculation allemande Première immatriculation : 16.10.2015 Poids total en charge technique (kg) : 39 000 Poids total admissible (kg) : 36 000 Poids à vide (kg) : 7 550 N° de châssis : WSM0000032686 PNEUMATIQUES ET ESSIEUX : Pneumatiques : 385/65 R 22,5 Configuration des essieux : 3 essieux Schmitz Cargobull 1er essieu relevable Suspension pneumatique Freins à disque CARROSSERIE Dimensions intérieures : Largeur (m) : 2,46 Longueur (m) : 13,68 DOCUMENTS DU VÉHICULE : Carte grise Certificat de conformité Documents supplémentaires disponibles sur demande et avec supplément. M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. Godjy Hzuiopfx Acgjbl (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainien/українська, Russe/русский Nous parlons : ALLEMAND, ANGLAIS, ITALIEN, ESPAGNOL, PORTUGAIS, UKRAINIEN, RUSSE, POLONAIS, BOSNIAQUE Malgré tous nos efforts pour garantir l'exactitude des informations, nous ne pouvons être tenus responsables d'éventuelles erreurs ou omissions. Nous invitons nos clients à consulter les photos disponibles. Les dimensions indiquées sont approximatives. Nos véhicules sont vendus dans l'état où ils se trouvent. Nous invitons nos clients à venir visiter notre société pour contrôler personnellement l'état du véhicule. Nous proposons également la possibilité d'un essai routier. Veuillez noter que les batteries livrées avec le véhicule sont celles actuellement installées. Si le client souhaite des batteries neuves, nous sommes à disposition pour toute information tarifaire.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 193 h, številka stroja/vozila: 2009801, dvižna višina: 8.000 mm, Lastna teža: 1.520 kg Dvižna zmogljivost: 230 kg Delovna višina: 777 cm Godpoy Nhy Djfx Acgebl Dimenzije tovornega prostora: 190 x 79 x 198 cm Stanje prednjih pnevmatik: 60 Stanje zadnjih pnevmatik: 60 Za več informacij se obrnite na skupino PFEIFER.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 257 h, številka stroja/vozila: 2011919, dvižna višina: 8.000 mm, Lastna teža: 1.520 kg Dvižna kapaciteta: 230 kg Delovna višina: 777 cm Dimenzije tovornega prostora: 190 x 79 x 198 cm Stanje pnevmatik spredaj: 70 Stanje pnevmatik zadaj: 70 Gedpfjy Nhyqjx Acgobl Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 838 h, številka stroja/vozila: GS4606-78890, Lastna teža: 2.447 kg Dvižna zmogljivost: 454 kg Delovna višina: 1.000 cm Dimenzije tovornega prostora: 241 x 117 x 226 cm Stanje prednjih pnevmatik: 60 Stanje zadnjih pnevmatik: 60 Za več informacij kontaktirajte PFEIFER GROUP. Godpfoy Nhydjx Acgsbl

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: CE155486, Lastna teža: 1.655 kg Dvižna zmogljivost: 350 kg Delovna višina: 820 cm Dimenzije tovornega prostora: 248 x 81 x 200 cm Stanje sprednjih pnevmatik: 70 Stanje zadnjih pnevmatik: 70 Gjdpfsy Nhx Hox Acgobl Za več informacij se obrnite na PFEIFER GROUP.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 126 h, moč: 12 kW (16,32 KM), dvižna višina: 16.000 mm, vrsta goriva: električni, barva: drugo, = Dodatne možnosti in oprema = - Pnevmatske gume, ki ne puščajo sledi - Podporne noge = Opombe = XL platforma, dvakrat izvlečna, gume ne puščajo sledi, popolnoma električna = Dodatne informacije = Splošne informacije Letnik izdelave: 2021 Tehnične informacije Pogon: kolesni Lastna teža: 8.400 kg Mere (D x Š x V): 496 x 235 x 315 cm Funkcionalno Nosilnost: 750 kg Delovna višina: 1.800 cm Gbjdoy N R D Espfx Acgel CE označba: da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Poškodbe: nobene

Stanje: rabljeno, prevoženi kilometri: 233.000 km, prva registracija: 04/2026, vrsta goriva: dizel, konfiguracija osi: 4x2, gorivo: dizel, barva: bela, emisijski razred: Euro 3, Oprema: ABS, centralno zaklepanje, klimatska naprava, zapora diferenciala, žerjav, Volvo FM9 260 HP – 233,000 km – Crane and Flatbed: - First registration: 2002 - 260 HP engine - Euro 3 - Approx. 233,000 km - Manual gearbox - Full air suspension - Gross vehicle weight: 18,000 kg - Payload: approx. 8,500 kg Features: Godpfx Asyy Slrocgebl - Differential lock, air conditioning, power windows, electrically adjustable mirrors, ABS, air-suspended driver’s seat, sun visor, headlight height adjustment, sunroof, cabin rear wall with window, central locking, CD radio Configuration: - Fixed flatbed, internal dimensions 7.63 x 2.48 m, 40 cm aluminium drop sides - Bonfiglioli P7200L hydraulic crane with 3 hydraulic extensions The vehicle is available for viewing and testing at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Zone) 37067 Valeggio sul Mincio (Verona), Italy Tel. +39 045-7950955 Please contact us to schedule an appointment to better organize access to our premises. For further information, technical details, or to obtain the sale price, please contact our sales managers directly at +39 045-7950955. Note: The vehicle description is intended as a guide and may contain errors or inaccuracies. Interested parties are required to verify the exact specifications before purchase. PSL Autocarri Srl accepts no responsibility for any errors or inconsistencies in this description. IMPORTANT: WE WILL ONLY RESPOND TO INQUIRIES THAT INCLUDE THE NAME AND TELEPHONE NUMBER OF THE REQUESTER.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 177 h, dvižna višina: 13.800 mm, vrsta goriva: dizel, barva: rdeča, Leto izdelave: 2017 Pogon: kolesni Dimenzije (D x Š x V): 280 x 130 x 216 cm Gbsdpjy Nxbxefx Acgsl Dvižna zmogljivost: 320 kg Delovna višina: 1.580 cm CE oznaka: da Tehnično stanje: zelo dobro Optično stanje: zelo dobro

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-over Platform Trailer Ref. for enquiries: 11630 Vehicle available immediately from stock in Alsdorf New vehicle inc. COC * Gross weight: 21 t, Payload: 16.5 t, hot-dip galvanized chassis * Platform version with 400 mm high front wall, ramp securing via ramp holding rods and diagonal bracing * Version with gross weight 21 t, reinforced frame and axles, axle spacing 1,810 mm * Floor height approx. 910 mm loaded / approx. 940 mm unloaded * 7 m loading area with 400 mm high front wall * Extended ramps: 3 m one-piece hot-dip galvanized ramps with galvanized grating * Ramp lift with vertically standing, adjustable springs for easy single-person operation * Load securing package: * 4 UVV folding lashing brackets (LC 8,000 daN) mounted in the existing hole pattern in the 45° outer frame, positioned approx. 1 m from front/rear crossmember * 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole pattern in the outer frame * 2 UVV lashing rings each at front and rear, recessed in crossmember, LC 10,000 daN * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and end crossmember * Preparation for retrofitting container locks (container locks available at extra cost) * Softwood floor, 50 mm thick * Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering * 235/75R 17.5 (twin tyres, 8x) with tyre pressure monitoring sensor * Plastic toolbox in front of the front wall, right-hand side in direction of travel * LED lighting system Gbsdpsyvxg Ujfx Acgel * 7-pin socket at rear, prepared for overlength lighting with tail light (58 R) and ground * 2 LED reversing lights at rear * Flashing side marker lights * Oversize warning panel * 1 removable all-round LED beacon incl. bracket and installation * Folding supports at rear, front support leg with geared winding mechanism ---- Lease purchase example from our partner MMV Leasing: €665/month net for 60 months term with no down payment and €0 final instalment Other terms with/without down payment/final value possible! We are Müller-Mitteltal authorised dealer ----* Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside business hours available by appointment * We speak German, English, Russian, Polish, French * WhatsApp

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 455 h, nosilnost: 350 kg, dvižna višina: 13.700 mm, vrsta goriva: električni, barva: modra, Oprema: pogon na vsa štiri kolesa, Letnik izdelave: sept. 2014 Lastna teža: 3.221 kg Dovoljena skupna masa: 3.571 kg Dimenzije (D x Š x V): 248 x 119 x 254 cm Gbedpfxoy Alzrj Acgol Delovna višina: 1.370 cm

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 575 h, nosilnost: 227 kg, dvižna višina: 7.800 mm, vrsta goriva: električni, barva: modra, Oprema: pogon na vsa štiri kolesa, Genie GS 1930, imported from a Danish Genie dealer, regularly maintained and occasionally used in showrooms and warehouses. Fully functional and ready for further use. Comes with a Danish TÜV certificate valid until May 2026, so it is immediately operational. It is equipped with two batteries. The original low operating hours amount to just 527 hours. All registration documents are included in the price. If a UDT (technical inspection) is required, we can arrange this promptly for an additional fee. We offer all payment methods: Leasing, financing, cash payment, and bank transfer. With cash payment or bank transfer, you can drive the vehicle directly from the showroom. We also take care of insurance—calculating the best rate for each vehicle—challenge us! We deliver purchased cars and trucks, for a fee, Europe-wide to your address. For more information about our services, please contact your dealer. Technical data: Working height: approx. 7.8–7.85 m Platform dimensions: approx. 1.63 m x 0.74 m (+ extension approx. 0.91 m) Transport dimensions: Length approx. 1.83 m, Width approx. 0.77 m, Height approx. 2.1–2.2 m Load capacity: approx. 227 kg (2 persons with tools) Speed: approx. 4 km/h Drive: Electric, 24 V, battery powered Maneuverability: Front-wheel drive, zero inner turning radius Weight: approx. 1,400–1,500 kg The quoted price is net and applies to export and business customers. A significant discount is available for private customers. Please contact us directly by phone to get the best price. = Further information = Year of manufacture: Dec. 2006 Unladen weight: 1,400 kg Gross vehicle weight: 1,627 kg Gbedjy Alx Dspfx Acgsl Dimensions (L x W x H): 183 x 80 x 220 cm Working height: 780 cm Warranty: 1 month

Stanje: rabljeno, Leto izdelave: 2021, Load capacity 230 kg, power plug: Schuko 230V, used Magni electric scissor lift ES0807E. Load capacity: 230 kg (max), Drive: front-wheel drive 15 V / 0.5 kW, Lifting motor 17 V / 3.0 kW Tyres: Exmile tyres 323x100 mm Dimensions: Working height 7.8 m, platform height 5.8 m, overall length 1.86 m, overall width 0.76 m, platform dimensions 1.67 m x 0.74 m, platform extension 0.9 m, Gedpfxjyvad Te Acgjbl Stowed height 2.15 m (with guardrails upright), transport height 1.82 m (railings folded) Controls: Basket socket, onboard display, joystick for lift and drive functions, operating hours counter Safety features: Max. permitted number of persons 2, charging protection, anti-entrapment protection, pothole protection, overload cut-off, tilt control with warning, emergency lowering, automatic brake system, horn, speed limitation at maximum lift height, platform door with automatic lock, battery charge indicator, foldable guardrails Weight: 1,630 kg Climbing ability: 25 % Battery: 4x 6V / 170 Ah Charger: 24 V / 8.5 A

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 1.629 h, nosilnost: 680 kg, dvižna višina: 18.000 mm, skupna masa: 7.908 kg, vrsta goriva: dizel, stanje pnevmatik: 80 odstotek, stanje pogona: 80 odstotek, Genie GS5390 - 18m - 4x4 - Diesel Leto izdelave: 2014 Gorivo: Diesel Tip: škarjasto dvižno ploščad Kategorija: delovna ploščad Delovna višina: 18 m Dvižna zmogljivost: 680 kg Gedpox Hiaajfx Acgobl Teža: 7908 kg Delovne ure: 1629 Transportne dimenzije: 3,98 m x 1,83 m x 3,15 m Lastnosti: pogon na vsa štiri kolesa (4x4). Opis: škarjasta dvižna ploščad Genie, tip: GS5390 4x4 (diesel) s pomično ploščadjo, dvižna zmogljivost 680 kg (osebe / material). Takoj pripravljeno za uporabo. Stroj je v dobrem stanju. Če imate kakršnakoli vprašanja v zvezi s strojem, mi pišite na e-pošto. Govorimo: - angleško - nemško - madžarsko

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 2.052 h, nosilnost: 680 kg, dvižna višina: 18.000 mm, vrsta goriva: dizel, stanje pnevmatik: 80 odstotek, stanje pogona: 80 odstotek, barva: modra, Oprema: pogon na vsa štiri kolesa, Genie GS5390 - 18m - 4x4 - Diesel Baujahr: 2013 Kraftstoff: Diesel Typ: Scherenarbeitsbühne Kategorie: Arbeitsbühne Arbeitshöhe: 18 m Tragkraft: 680 kg Eigengewicht: 7.908 kg Betriebsstunden: 2.052 Transportabmessungen: 3,98 m x 1,83 m x 3,15 m Ausstattung: Allradantrieb (4x4) Beschreibung: Scherenarbeitsbühne Genie, Typ: GS5390 4x4 (Diesel) mit verschiebbarem Arbeitsplattform, 680 kg Hubkraft (Personen / Material) Sofort einsatzbereit. Die Maschine befindet sich in gutem Zustand. Bei Fragen zu dieser Maschine schreiben Sie mir bitte eine E-Mail. Wir sprechen: - Englisch - Deutsch Gjdewfdfuspfx Acgsbl - Ungarisch

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 2.326 h, nosilnost: 680 kg, dvižna višina: 18.000 mm, skupna masa: 7.906 kg, transportna dolžina: 3.980 mm, transportna širina: 1.830 mm, transportna višina: 3.150 mm, vrsta goriva: dizel, stanje pnevmatik: 80 odstotek, stanje pogona: 80 odstotek, barva: rdeča, Oprema: pogon na vsa štiri kolesa, Genie GS5390 - 18 m - 4x4 - Diesel Leto izdelave: 2014 Gorivo: Diesel Tip: škarjasto dvižno ploščad Kategorija: Delovna ploščad Delovna višina: 18 m Dvižna zmogljivost: 680 kg Teža: 7906 kg Obratovalne ure: 2326 Transportne dimenzije: 3,98 m x 1,83 m x 3,15 m Značilnosti: Pogon na vsa štiri kolesa (4x4). Opis: Škarjasta dvižna ploščad Genie, tip: GS5390 4x4 (diesel) z premično platformo, dvižna zmogljivost 680 kg (osebe / material) Takoj pripravljena za uporabo. Stroj je v dobrem stanju. Za vprašanja o stroju mi, prosim, pišite na e-mail. Govorimo: - angleško - nemško Gbjdpfx Ajxdzxgocgel - madžarsko