Müller-Mitteltal 2-Achs Cont.-Anh., Beladung Von Vorne Und Hinten nakup rabljenega (53.897)

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Gedpen Aw Hksfx Ap Eoud Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: rabljeno, lastna masa: 3.680 kg, največja dovoljena obremenitev: 10.720 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2021, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55R19,5 156J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R19,5 156J, velikost zadnje pnevmatike: 385/55R19,5 156J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, KOT NOVO, široke pnevmatike, kiper ploščad CINKANA, 12 pritrdilnih obročev, stranske stene 600 mm, doplačilo za rampe 1.000 €, -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, vzorčne slike --, Več podatkov na zahtevo! Guedpfx Aszk Iq Aep Eed

Stanje: rabljeno, lastna masa: 5.750 kg, največja dovoljena obremenitev: 24.250 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 141/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 141/140J, velikost zadnje pnevmatike: 235/75R17,5 141/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak,  ,  Vozilo stranke, , --  Napake v tisku, napake in spremembe so pridržane, vzorčne fotografije --, Več podatkov na: !, Več podrobnosti: ! Gjdpjzk A Dwjfx Ap Eeud

Stanje: rabljeno, lastna masa: 3.480 kg, največja dovoljena obremenitev: 10.920 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 10/2019, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 5.040 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55R19,5 156J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R19,5 156J, velikost zadnje pnevmatike: 385/55R19,5 156J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Širše pnevmatike, pritrdilne zanke, dodatno doplačilo za rampe 800 €, napaka v tisku, pomembne so morebitne spremembe, slike so samo za ponazoritev, več podatkov na: ! Guedpfx Apezkultj Esd

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 4.060 kg, največja dovoljena obremenitev: 13.940 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 03/2015, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 68.000 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 8.600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2015, Oprema: ABS, TAKOJ NA VOLJO!!! ZELO DOBRO STANJE!!! Guedpfx Asyku Nmjp Eod SCHWARZMÜLLER T-SERIE TANDEM 2-osni priklopnik Neto izvozna cena: 15.900 EUR

Stanje: novo, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 275/70R22,5, Oprema: ABS, Schwarzmüller Jumbo construction material trailer | BPW axles with disc brakes | Pallet box, 2x stainless steel toolboxes | Rear storage compartment 600x400x2,900 mm | Side wall height 1.00 m, front wall height 1.40 m | Loading dimensions: 7.10 m x 2.48 m | XLite aluminum rims | Tires: 275/70R22.5 twin tires | Plastic tarpaulin with rubber straps | Aluminum storage tray and front entry step | Subject to errors, input mistakes, and prior sale. Gusdpfotuwbpex Ap Eod

Stanje: rabljeno, največja dovoljena obremenitev: 14.760 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2016, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 930 mm, prostornina tovornega prostora: 16 m³, Oprema: ABS, * 7452 - ID vozila za telefonska povpraševanja * ABS, EBS, BPW-osi, kolutne zavore, zračno vzmetenje, centralno mazanje, aluminijaste stranice 1,00 m, luknjičasta letev levo + desno, 2x skladiščna škatla * Višina nakladanja: 1,35 m * Sprednje pnevmatike: 385/65R22,5 (3 / 11 mm) * Zadnje pnevmatike: 385/65R22,5 (3 / 6 mm) ----naš e-poštni naslov: Gusdpfx Aozd Nd Dep Eod naša storitev za vas: - Pridobitev kratkoročnih ali carinskih tablic - Prevoz / dostava po celotni EU - Carinjenje vozil v tretje države Če imate vprašanja v ruskem jeziku, lahko pokličete na naslednjo številko * WhatsApp samo za govorce ruskega jezika: * Whatsapp za angleški, nemški in druge jezike:

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (results in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reverse lights at the rear (activated by reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets at front and rear * Support winch at front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, one on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with a total external width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45° bent with 2 t lashing force every 480 mm * Installation of 3 t lashing brackets possible every 600 mm - 5 x 3 t UVV-lashing brackets mounted per side Godpfxov D Tbkj Ap Eoud * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end crossmember) * Various drillings in front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Storage compartment under the loading platform at the rear, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from CW 39/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as Return-to-Ride (RtR) valve ----Drawbar: Drawbar, 1,200 mm long with 40 mm draw eye and height adjustment via tension spring & turnbuckle ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool (for axle load display – front and rear separately) * Tire pressure monitoring system with display possibility in the truck via EBS signal, no installation required on the truck side * 15-pin power connector * LED lighting 12/24 V * LED beacon (removable) at the rear ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle (FA) plastic quarter mudguards with spray protection * Rear axle (RA) straight galvanized steel mudguards with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, powder-coated black, mounted right side * Box in rotating frame for accessories, with folding lid, 2 pcs. container locks permanently fitted (directly after the rotating frame platform) * 2 galvanized steps on the rotating frame, left and right ----Low-loader Platform: * ROBOT-welded anti-slip covering to the steel plate of the rotating frame platform (protruding weld beads) ----Load Securing (Load Securing Package consists of): * 2 lashing eyes (13.4 t) front left & right at the front wall crossmember * 1 pair of UVV lashing rings (13.4 t) at the front & rear, and 3 pairs UVV lashing rings (10 t) each side, pivotable and lowerable, loadable in all directions and recessed in the outer frame * 3 stake pockets each side with simultaneous 2 t lashing capability * Profifix lashing rail lengthwise in the center axis, in the flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m total width (not on rear slope) * Widening planks stored in the middle of the loading area Gsdpfxstplwis Ap Eoud ----Ramps: * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for future retrofitting of hydraulic ramp shifting ----Excavator Arm Rest: * Excavator arm rest over rear axle, continuous up to the end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned laterally in the longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm air suspension ----Coating/Paintwork: * Chassis, rotating frame, folding outriggers, fall supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tanks, drawbar painted in a black tone ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift Gjdpfsl Th I Ajx Ap Eeud ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.880 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, Leto izdelave: 2026, SAF osi, bobnaste zavore Godpfxoylf Rqs Ap Eeud Notranja dolžina ca. 4.880 mm Notranja širina ca. 2.420 mm Skupna širina maks. 2.550 mm Višina nakladanja brez tovora ca. 1.510 mm Drsna ponjava Podest Prstani za pritrjevanje v dnu kiperja Vmesna prodaja in napake pridržane! Vozilo na voljo za najem ali najem z odkupom!

Stanje: rabljeno, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 10/2016, Oprema: ABS, Dobrodošli u Johanning’s Nutzfahrzeuge, vašeg specijalistu za mlada i ekskluzivna polovna vozila. ODMAH dostupno! Moguća isporuka. Cena na upit! Finansiranje i lizing moguće na zahtev. Guodpsycpd Aefx Ap Ejd Lokacija: 39606 Osterburg Marka: Mueller Mitteltal Tip: TA-2 / ETUE-TA-R 11,9 Godina proizvodnje: 2016 Radna težina: 3.250 kg TÜV: mart / 2026 SP: septembar 2026 Širina: 2,47 m Dužina: 6,20 m Visina: 90 cm Za dodatne slike ili video materijal slobodno nas kontaktirajte. Johanning’s Nutzfahrzeuge, Vaš partner za ekskluzivna i mlada polovna vozila. Naše usluge - Vaše prednosti (posle prodaje) - Otkupljujemo Vaše vozilo (u bilo kom stanju) - Besplatna odjava Vašeg vozila odmah - Registracioni servis za 150 € (uključuje takse i tablice) - Privremena registracija - Pregled i probna vožnja mogući u svakom trenutku uz prethodnu telefonsku najavu - Isporuka na Vašu adresu moguća po dogovoru. Greške i prethodna prodaja su mogući.

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: Gedpfx Apoy Ngzye Esud * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics Gjdsl Tihuspfx Ap Eeud ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles Guedpol Tnvgofx Ap Esd ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V Godpfx Asxptn Dsp Eoud * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards Gedpfx Ajy Ngz Hjp Ejud * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: Gusdpfx Ajpk D I Aep Ejd * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle Gjdpfx Aowh Hdxsp Eeud * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * EK 9.6 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange-Type Towing Eye: * Drawbar as central axle drawbar with 40 mm screw-in towing eye Gujdpfx Apew Ndr Us Esd * Continuously adjustable drawbar height with spindle lifting mechanism instead of fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation needed on the truck side * 15-pin power socket * LED tail lights * Flashing side marker lights ----General Attachments: * Front support winch * Closed plastic mudguards * Foldable underrun protection for pavers ----Chassis: * Chassis made from fine-grain steel ----Tipper Body: * Pallet - 3-way tipper body * 700 mm steel front wall * Asymmetrical aluminium side walls - continuous without centre stanchion - folding with overtravel catches and swinging via manual central locking * 800 mm high steel tailgate with automatic opening when tipping rearward * 4 mm Hardox 450 steel floor ----Load Securing: * Two pairs of 3 t folding lashing brackets recessed into the steel floor on each side ----Painting: * Chassis, drawbar, underrun protection hot-dip galvanized * Painting of the tipper body in a RAL colour of your choice (no special or metallic paints) can be changed up to approx. 6 weeks prior to completion ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 42/2026

Stanje: novo, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Drawbar height adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-measurement approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning boards front and rear * Landing gear at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container outside width) and lockable, locking dimension retracted to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension not to DIN) with an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm - five 3 t UVV lashing brackets installed on each side Gjdpfx Aoy U A Elop Eoud * In each front and rear corner, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor, rear in the end cross member) * Various drill holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair aluminium slide-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair) suitable for rubber-tyred and tracked vehicles * Rear stowage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. CW 38/2026

Stanje: novo, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in dimension B: approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system, 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * Tire pressure monitoring system (TPMS) ----General Fittings: * Mechanically adjustable 3-metre warning panel sets, front and rear * Support winch (front) * External foldable support legs (rear) * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted left and right * Side underrun protection * Rear underrun protection * Quarter mudguards (plastic) ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container external width), lockable – locked to ISO - DIN 15190 = 2,259 mm, extended = 2,819 mm (this measure is not to DIN), for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation possible for 3 t drop lashing rings every 600 mm. (5 x 3 t UVV-certified lashing rings per side) * In the front and rear corners, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various drilling holes for 1.2 t lashing points in the front wall and rear crossmember ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t/pair) – suitable for rubber-tyred and tracked vehicles * Storage compartment at the rear, recessed under the loading platform in the chassis ----Paintwork: Guodpfx Ajy U A Efop Eed * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted black ----Further Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. calendar week 38/2026

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles Guedpfx Apsv D Tbds Eod ----Suspension: * Air suspension with lift and lower function ----Drawbar / Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * Drawbar shortened by approx. 200 mm to about 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (actuated via reverse gear) * 1 removable LED beacon incl. bracket at the rear * Tire Pressure Monitoring System (TPMS) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing leg at the front * External fold-down supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm – laterally, 5 x 3 t UVV-compliant lashing rings installed per side * At the front and rear corners 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front wall and end cross member for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment under the loading area, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear support elements hot-dip galvanized--- * Axles, air tank, front landing leg, and flange towing eye painted in black ----Other information: * Brand-new vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 39/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, PT 30 Profile: ----Braking System: * EBS (electronic braking system) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles Gedpfxsxptn Ro Ap Eoud ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and height adjustment via traction spring & turnbuckle ----Electrical / Lighting: * Smart-Board information system mounted on the trailer (for axle load indication – separate front and rear display) * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud skirts with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in the bogie for accessories, with folding lid and 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low Loader Platform: * Robot-welded non-slip overlay on the steel plate of the bogie platform (protruding weld seams) ----Load Securing (La-Si package consisting of): * 2 lashing eyes (13.4 t) front left & right on front bulkhead carrier * 1 pair of UVV lashing rings at front & rear (13.4 t) and 3 pairs of UVV lashing rings on each side (10 t), pivotable and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets on each side, each with 2 t lashing capacity * Profifix lashing rail in longitudinal axis, centered in flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear taper) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way control block for future retrofit of hydraulic ramp lateral adjustment ----Excavator Arm Rest: * Excavator arm rest above rear axle, extending to the rear end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, located laterally in the main longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm (air suspension) ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports and ramps hot-dip galvanized * Axles, slewing ring, air tanks, and drawbar painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame Gujdpfx Aol Th Nnop Eod * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf