Hrd Polpriklopnik Z Nizko Nakladalno Ploščadjo nakup rabljenega (27.721)

Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6 x 4 or 8 x 4 Nwsdpfxsy Uwu Io Am Teg Lowbed: * Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking * Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length * 7 pairs of folding lashing rings outward (LC 10,000 daN) * 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings Rear chassis: * Rear chassis with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to house air tanks * 3 pairs of folding lashing rings outward (LC 5,000 daN) * 1 pair of folding lashing rings outward (LC 10,000 daN) * 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F) Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Coating: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit) * Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks * Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings * Electrohydraulic unit * Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit * Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer * At the gooseneck front and rear left and right, each with a holder for warning signs, including socket * Manual and documentation on USB stick * Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control * On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * Separate air connection with air gun on the gooseneck * A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full specification available on request. Gooseneck * With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform * Extendable version * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Legs * JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle rigid, remaining axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer * High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red * Wheels painted silver Nodpsv Etx Ejfx Am Tewg Included Accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanised front connection strip * 4 chocks with holders mounted on the front wall * Spare wheel holder in front of front wall * Electro-hydraulic unit * Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required) * European reflector boards (red-yellow) at rear of trailer * Yellow reflective tape complying with EU regulations on the sides, extension and rear * On gooseneck and rear plate—left and right—each with holder for warning boards including connector * Mount for rotating beacon at the rear of the trailer * Galvanized folding supports below the bevel of the loading platform * Axle load pressure gauge including axle-load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers * Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform * Galvanized extensions, extendable by approx. 230 mm per side * Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump * 2 LED reversing lights mounted at the rear * Acoustic reverse warning signal * HRM metallisation (High Resistance Metallisation)

Stanje: rabljeno, lastna masa: 10.600 kg, največja dovoljena obremenitev: 22.500 kg, skupna masa: 33.100 kg, konfiguracija osi: 3 osi, prva registracija: 12/1984, dolžina tovornega prostora: 11.900 mm, širina tovornega prostora: 2.730 mm, višina nakladalnega prostora: 950 mm, vzmetenje: jeklo, velikost pnevmatike: 7.50R15, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden, 3 axles, SAF axles, leaf suspension, lashing rings, split loading ramps (2-piece), mechanical ramps, side aluminium underrun protection, supports, twin tires Njdji Rp A Nepfx Am Tewg Body: 3-axle low-loader semi-trailer with 2-piece mechanical loading ramps, loading length on lower platform approx. 8,900 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Coupling height loaded: 1,250 mm Loading Platform Nedjy Iq Tdepfx Am Tewg Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Stepped up to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: novo, največja dovoljena obremenitev: 31.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2026, Oprema: ABS, DOLL NEXT DOLL Tiefbett tera T2P-S3FS21 – 2-achsiger Tieflader aus der kurzfristig verfügbaren rapid-Serie der DOLL Fahrzeugbau GmbH aus Oppenau – aus dem Herzen des Schwarzwaldes. Ideal für den anspruchsvollen Einsatz im harten Off-Road-Bereich, schwierigem Gelände sowie im täglichen Baustellenbetrieb. Je nach Verfügbarkeit sehr schnelle Lieferung und sofort einsatzbereit dank der DOLL-rapid-Serienfertigung. Individuell konfigurierbar nach Ihren Wünschen und Anforderungen. Njdpfxeyytm Rs Am Tjwg Technische Daten * Zulässiges Gesamtgewicht: 45.000 kg * Eigengewicht: ca. 13.600 kg – Nutzlast: ca. 31.400 kg * Fahrwerk: 2x 12-t-Pendelachsen * Tiefbett teleskopierbar * Fahrzeugbreite: 2.550 mm * Ladehöhe (beladen): 300 mm * Radstand: 1.360 mm Ausstattungsmerkmale * Abfahrbarer Schwanenhals für deutlich erleichtertes und schnelleres Be- sowie Entladen * Leichtgängige Teleskopierung für effizientes Handling * Hochwertige Spritzverzinkung – optimaler Korrosionsschutz und reduzierte Standzeiten * Pulverbeschichtete und feuerverzinkte Anbauteile – robust, langlebig und rostfrei Ihre Vorteile auf einen Blick * Schnelle Verfügbarkeit * Robust & zuverlässig – bewährte Technik, auch unter schwierigen Bedingungen ideal * Made in Germany – gefertigt bei DOLL Fahrzeugbau, Oppenau – über 145 Jahre Erfahrung im hochwertigen Fahrzeugbau Smarte Technologien Unser innovativer Ansatz vereint höchste Qualität, Leistung und Wirtschaftlichkeit. Die stetig steigende Nachfrage nach unseren Tiefbett-Sattelaufliegern treibt die konsequente Weiterentwicklung modernster Technologien in der Serienfertigung voran. Kontakt & Standort Hergestellt von DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (Hauptsitz und Produktionsstandort) * Die Fahrzeuge können je nach Kundenstandort direkt im Werk oder bei ausgewählten Referenzkunden deutschlandweit zusammen mit einem Außendienstmitarbeiter präsentiert werden.

Stanje: rabljeno, največja dovoljena obremenitev: 38.230 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2026, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Müller-Mitteltal Low Loader with Wheel Recesses TS 3 RM ML 30.0, 2 Loading Heights and Ramps * Saddle load increase from 12 t to 18 t included, king pin installed in the second king pin position 2", up to the gooseneck 2,750 mm. Rear swing radius approx. 2,400 mm in the clear (a minimum clearance of 150 mm is recommended). Front swing radius 1,480 mm or 1,570 mm with spare wheel. Note: Sufficient clearance to the towing vehicle must be ensured by the customer. * Sliding elements for wheel recesses at the front and rear (205 mm deep). 6 loose planks for wheel recess supports as receiving pockets according to Code 09.112. ALU compressed air tank instead of steel. * Smartboard control unit installed on the trailer as an info tool with pressure sensors, providing total axle load display. Display optional via the control box or in the truck via the EBS air suspension system (depends on truck manufacturer). * SP combination package: Toolbox with 45° corners made of galvanized steel, additionally powder-coated in RAL 9006 White Aluminium, mounted on the saddle platform W=2,480 x H=500 mm with top folding lid, side doors, and angled left ALU side walls foldable to the saddle platform (500 mm high), ALU rear wall plug-in (150 mm high), ALU sideboards inside and outside painted in RAL 9006 White Aluminium. Includes foldable and removable rear stanchions, galvanized (without finish coating). Includes bolted front structure. Length from front cross member to gooseneck 3,935 mm, front swing radius without spare wheel at gooseneck dimensions 2,450 mm or 2,750 mm approx. 1,750 or approx. 1,480 mm. * 2 recessed container locks installed in the front cross member. * 3 receiving pockets under the saddle platform for optional storage of ALU loading ramps or wooden planks for wheel recess covers. * Folding outriggers/telescopic outriggers (galvanized) and wooden planks for widening incl. (not on rear slope), plank holder on the saddle platform (load track width may not exceed 2,500 mm). * Second LED position light at the warning package front and rear (dual lighting), only in combination with warning package. * 2 LED reversing lights at the rear of the trailer, switched with reverse gear (suitable for 12 V and 24 V), max. total 2 additional allowed. * 7-pin socket at the rear, wired for overlength lighting with taillight (58 R) and earth. Nodpfxsy R Ipuj Am Tswg * Rubber coating on the drive-up slope left and right (approx. 860 mm long) 190 07644 rubber strips on the inner plank of the one-piece ramps. * Fully automatic central lubrication system with pump (24V), grease reservoir, and integrated trailer control unit, without connection of the ramps (when with steering: incl. connection of the distributor on the saddle platform). Note: Only possible with towing vehicles with a 24V lighting system! Subject to prior sale and errors! Sale exclusively subject to our terms and conditions. Important Notice: Despite careful verification of all details in our offer, errors can occur. Some may be caused by transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute legal entitlement. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for contract negotiations. All information given here is without guarantee and therefore does not constitute any assured property.

Stanje: novo, največja dovoljena obremenitev: 29.260 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2025, Oprema: ABS, Kässbohrer SLAR3 Extendable Lowloader with Wheel Wells Technical Specifications: Model and Manufacturer: * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable low-bed trailer with wheel recesses, suitable for transporting vehicles and heavy machinery. Njdpfx Amox Epaqs Tswg Dimensions: * Total length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm through side extensions) * Saddle height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capabilities: * Permissible total weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Dead weight: 12,744 kg ±3% * Axle capacity: 30,000 kg (10 tonnes per axle) * King pin capacity: 18,000 kg Axle Equipment: * Number of axles: 3 (2 fixed front axles, 1 rear steering axle) * Lifting axle: Manually load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Rims: * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre markings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre lifespan * Number of rims: 12 pieces (steel rims, offset ET120) Chassis and Suspension: * Suspension: Air suspension with load gauge * Braking system: Dual-line compressed air brake system by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics: * Lighting system: 24V, multi-chamber lights by ASPÖCK, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connections * Connectors: NATO socket with 2 x 50mm² intermediate cables (3 m length) Ramps: * Ramp type: Foldable hydraulic loading ramps with sliding mechanism * Capacity: 40 tonnes * Ramp surface: Hardwood * Safety: Ramp protection chain included Load Securing: * Lashing rings: - 2 x 2 with 5,000 daN capacity each - 1 x 2 with 10,000 daN capacity on the gooseneck - 4 x 2 lashing rings with 6,000 daN capacity in the well area * Container locks: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features: * Gooseneck: With 90° vertical corners, stable and durable * Floor: 45 mm thick hardwood and steel floor with anti-slip (droplet) structure * Wheel well bridge: Segmental hardwood bridges with sheet metal supports for closing the wheel wells * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours: * Chassis: Traffic red (RAL 3020) / also available in black * Partial metallization of the contact surfaces Condition: New and immediately operational. * Perfectly suited for heavy transport and use in construction or machinery relocation.

Stanje: rabljeno, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2000, B= 12000 mm Teža praznog vozila 11300 kg STZ-V-labudova vrata pomerajuće unapred za utovar sa prednje strane zamenjiv 2" - čep/kraljevski zatik ugrađen hidromehanički sistem upravljanja hidraulična funkcija podizanja i spuštanja, uključujući cilindar za oslonac projektovano za tehničko opterećenje sedla do 18 tona aluminijumske bočne stranice, sa sve četiri strane radijus zakretanja 2400 mm Most platforme sa niskim ležajem dužina ravnog dela 5.000 mm, teleskopski produživa za 2.300 mm širina ravnog dela 2.550 mm Nodoy Hgh Uepfx Am Tewg visina konstrukcije 280 mm napred kukice za spajanje sa STZ-V-labudovim vratima 2 klinaste rampe za uspon na prednjem delu mosta sa niskim ležajem visina utovara oko 450 mm 3-osovinski trap zračno ogibljenje (DxŠ) cca 4.500 x 2.550 mm, uključujući ventil za podizanje i spuštanje, sa 3 prinudno upravljane osovine, Proizvođač: SAF, međuosovinski razmak 2x 1.310 mm Visine vožnje 970 mm Kočioni sistem dvocevni, pneumatski kočioni sistem na sve točkove preklopive proširenja u niskom ležaju visina sedla pod teretom: 1.250 mm sve 3 osovine hidraulički prinudno upravljane sa funkcijom naknadnog upravljanja

Stanje: rabljeno, največja dovoljena obremenitev: 37.530 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 11/2026, skupna širina: 3.000 mm, skupna višina: 3.780 mm, Oprema: ABS, * Gooseneck with foldable side walls * Low bed length: 11,950 mm - 15,450 mm * Low bed extendable in steps by 3,500 mm * Low bed width extendable by 460 mm * Hydraulically adjustable loading ramps (split, 2 parts) * Stake pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd + 4th axle with steering function * Wheel chocks ----* Tire size: 235/75R17.5 * Technical gross weight: 58,000 kg * Unladen weight: 12,470 kg * Overall length: 13,700–17,200 mm * Overall width: 2,540–3,000 mm * Safety inspection due: 05/2026 ----Vehicle number: 12062----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions—we will take care of everything. Among other services, we can offer you the following for an additional fee:----* Trade-in of your old vehicle * HU/Safety inspection * Complete export processing * Financing brokerage * Application for export license plates * Vehicle transfers Nwedpfx Amjy T Dyzs Tog * Vehicle registration * Recovery and vehicle transport ----?YOUR VTS TEAM

Stanje: rabljeno, največja dovoljena obremenitev: 28.000 kg, skupna masa: 38.500 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.480 mm, širina tovornega prostora: 2.540 mm, Oprema: ABS, * 9008 – Vehicle ID for telephone inquiries * Low-bed semi-trailer, type: MTS-3 * Special low-bed semi-trailer for transporting work platforms with foldable rear section * ABS, EBS, BPW Eco Plus axles, twin tires, air suspension with lift and lower function, 1st axle liftable, 3rd axle friction-steered with additional steering * Gooseneck, front wall, lashing rings, storage boxes * 24 V electric pump powered via NATO socket * Electric winch * Remote control for winch and hydraulics * Hydraulically lowerable and foldable loading platform at the rear, ramp extendable hydraulically * Hydraulically raised ramp at the gooseneck transition * Grating floor over the entire loading area Nsdjy I Iahspfx Am Tswg * Technically permissible total weight: 41,500 kg * Tires 1st axle: 235/75R17.5 ( 6 / 8 / 11 / 11 mm ) * Tires 2nd axle: 235/75R17.5 ( 9 / 9 / 9 / 9 mm ) * Tires 3rd axle: 235/75R17.5 ( 11 / 11 / 9 / 9 mm ) ----Our email address: Our service for you: – Procurement of short-term or export license plates – Transfer / delivery EU-wide – Customs clearance for vehicles to third countries If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German and other languages:

Stanje: rabljeno, lastna masa: 8.550 kg, največja dovoljena obremenitev: 27.450 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2021, dolžina tovornega prostora: 12.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rdeča, Leto izdelave: 2020, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, zračno vzmetenje, 1. os dvižna, ABS (protiblokirni sistem), hidravlične rampe, zadnje podpore, podporniki. 9 t osi, bobnaste zavore, višina nalagalne površine cca 880-950 mm, razširljivo na 3.050 mm, dolžina nizkega ležišča 8.800 mm, dolžina labodjega vratu 4.000 mm, skupna masa pri 3-osnem vlačilcu 42.000 kg, nosilnost 31.290 kg, RAL 3003. PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Nsdpfx Amjy Sbngs Tewg

Stanje: rabljeno, največja dovoljena obremenitev: 36.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, skupna širina: 2.550 mm, Oprema: ABS, Our entire vehicle inventory, including immediately and soon available vehicles, can be found on our website. Partial list of equipment. Full equipment details available upon request. Gooseneck: * Gooseneck in SNT design to optimize platform length, approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 25,000 kg * Suitable for tractors: 4x2, 6x2, and 6x4 Lowbed: * Lowbed designed as a telescopic vessel bridge in low-profile construction with front extension and mechanical locking * Length x width approx. 6,850 mm x 2,540 mm * Supply lines are protected inside the extendable beams and automatically adjust to the respective lowbed length Axles and Suspension: * PENDLE AXLE * All axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation * Cylinders with automatic RESET function * Hydraulic cylinders fitted with shut-off valves and quick-connect pins for securing in raised position * Technical axle load: 12,000 kg per axle * Hydraulic axle compensation * Tires: 245/70 R 17.5 * Rear chassis with closed outer frame, checker plate cover, continuous prism excavator trough approx. 1,250/700 x 505 mm, open at rear Braking System: * WABCO EBS-E braking system compliant with EU regulations, without connection cable to tractor unit Paintwork: * Trailer color: RAL 3002 Carmine Red Included Accessories: * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power pack for hydraulic functions (excluding hydraulic winches; supply connection installation to the tractor not included) * Outer beams of the gooseneck with mounting holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear inclination of the gooseneck (LC 6,000 daN) * 2” king pin * One locking point approx. every 500 mm on the extension * 1 pair of steel ramps with climbing strips and locking bolts for bridging the deep-bed hook supports * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the outer beams of the platform (LC 10,000 daN) on the top flange of the outer beams * Recesses above the lashing rings * 1 hanging lashing ring each left and right on the rear cross member (LC 10,000 daN) on the outer beams of the platform * Preparation for removable load floor * Hook-in rail at the front of the rear chassis to the lowbed for loose approach ramps Nwedpfxsx Uvlle Am Tjg * Chassis with chamfered corners at the rear * Hook-in rail for loose aluminum approach ramps at the rear traverse of the vehicle * Remote steering from front and rear via cable remote control with pushbuttons, axle tracking control, no installation in the tractor unit * Mechanical pin-tab coupling from lowbed to chassis for deck change or addition of extension beams, with electro-pneumatic-hydraulic couplings * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 2 axle load gauges installed on the left side Including special accessories: * 1 pair of detachable anodized aluminum side walls on the gooseneck, approx. 400 mm high * A

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, konfiguracija osi: 3 osi, prva registracija: 10/2015, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2015, Dvojne rampe / Avtosmerni os / Pnevmatski razširitelj, prirejen labodji vrat Nwodey Uh Nvepfx Am Tog

Stanje: rabljeno, največja dovoljena obremenitev: 18.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/1987, dolžina tovornega prostora: 12.340 mm, širina tovornega prostora: 2.620 mm, skupna širina: 2.750 mm, skupna višina: 1.450 mm, Nizkopodni prikolica: Ukupna dužina - 8.530 mm, dužina do prve osovine - 4.360 mm, visina utovara - 690 mm, dužina preko obe osovine - 1.800 mm, visina utovara: 900 mm, dužina iza osovina - 2.130 mm, visina pristupa - 830 mm, prednji nagib 240 mm, širina: 2.620 mm, labudov vrat: 3.900 mm, visina priključnog sedla 1.180 mm, pozicija kraljevskog zupca prema napred: 1.150 mm, aluminijumske rampe za utovar (DxŠ) 2.880x500 mm, 4 x teški vezni prstenovi po strani, JOST potporne noge, SAF osovine, bubanj kočnice, lisnate opruge, vozilo može biti oblepljeno reklamom i/ili obeleženo natpisima. SI85673 Naša ponuda generalno ne uključuje novi TÜV tehnički pregled. Ukoliko želite novi TÜV pregled, rado ćemo Vam dostaviti ponudu naših partnerskih servisa! Vozilo može biti oblepljeno reklamom i/ili obeleženo natpisima. Primjenjuju se naši opšti uslovi isporuke i plaćanja. Rado ćemo Vam pripremiti ponudu za finansiranje ili lizing za ovaj objekat. Molimo kontaktirajte nas! Nwodpfxeyqdguj Am Tjg

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2000, naslednji pregled (TÜV): 10/2026, Leto izdelave: 2000, Brez MAN vlečnega vozila Nodpfx Aeyhrqcem Tewg

Stanje: rabljeno, prva registracija: 01/2012, * Ponjava nadgradnja * Nizkopodnožno prikolico * Ponjava * Nadgradnja * Variabilna ponjava nadgradnja za nizkopodnožno prikolico * Odstranljivo * 12,45 m x 2,40 m x 2,60 m + 50 cm (notranje) * Takoj na voljo * Pridržujemo si pravico do napak Imate vprašanja? Kontaktirajte nas za hitro svetovanje, tudi neposredno preko WhatsApp-a: Nsdpolmicmsfx Am Towg Nudimo: Neto nakup za podjetja iz EU z ID za DDV, kot tudi za kupce iz tretjih držav. Leasing in financiranje. Urejanje vseh carinskih formalnosti. Izdaja začasnih in izvoznih registrskih tablic. Prevoz do pristanišča. Vse cene na Kleinanzeigen so bruto in že vsebujejo zakonsko določeni DDV v višini 19%.

Stanje: rabljeno, prva registracija: 01/2012, * Nadgradnja s ponjavo * !!!Ni polpriklopnik s nizko nakladalno ploščadjo!!! * Vdolbina za kolute * Ponjava * Nadgradnja * Variabilna nadgradnja s ponjavo za nizkopodni polpriklopnik * Odstranljiv * Takoj na voljo * Pridržujemo si pravico do napak Imate vprašanja? Kontaktirajte nas za hitro svetovanje, tudi neposredno prek WhatsAppa: Nudimo: Neto nakup za podjetja iz EU z ID za DDV ali za stranke iz tretjih držav. Leasing in financiranje. Nwodpfxerqtqme Am Teg Ureditev vseh carinskih formalnosti. Ureditev kratkoročnih in izvoznih registrskih tablic. Prevoz do pristanišča. Vse cene na Kleinanzeigen so bruto in že vključujejo zakonski DDV v višini 19%.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 14.900 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, prva registracija: 09/2025, barva: rdeča, Leto izdelave: 2025, Polpriklopnik se prodaja v kombinaciji z vozilom Volvo FH16-750. Vozilo se lahko podaljša za 4,05 m. Opremljeno je z nosilcem za dolge materiale in dvema hidravličnima nakladalnima rampama. Nedpfey H Agaex Am Tjwg

Stanje: rabljeno, največja dovoljena obremenitev: 48.000 kg, skupna masa: 72.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2026, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, NEW!!! Full air suspension, first axle lift, fourth axle steering axle, remote-controlled and manual hydraulic support, extendable by 25 cm each, hydraulic ramps, hydraulic rear support and manual support. SAF axles. DIMENSIONS AND WEIGHTS Vehicle length: 13,560 mm Gooseneck length / Platform length: A: 9,000 mm Compatibility with towing vehicles Platform height (loaded): 1,000 mm Axle loading / Wheelbase: H: 1,360 mm King pin load / Width: 2,550 mm Loaded weight / Wheelbase: D: 7,595 mm Unladen weight (± 3%) Nwjdjyn Ux Aepfx Am Tsg PLATFORM AND DRIVE TECHNOLOGY DATA 3,950 mm individual drive (4x2 and 4x4) 48,000 kg (4 axles x 12 tonnes) / 24,000 kg / 72,000 kg Chassis material: High-strength I-beam frame Chassis cross members: Quality steel S355J2+N 2” king pin (1 pc) / King pin position: 2 pcs. Gooseneck type: Fixed. Standard gooseneck (internal) Chassis platform top: sides – wood; wheel tops and center – steel; gooseneck top – steel Side extension: 250 mm + 250 mm extension Galvanized lashing rings (12 tonnes) on platform sides Stake pocket slots for lashing chains FEATURES 265/70 R 19.5 steel rims 1st & 2nd ramps: Fixed; 3rd & 4th ramp (1st lift): Wabco EBS 4S/2M Ramp type: Hydraulic, retractable, one-piece Ramp additional functions: Extend & retract (hydraulic) Gooseneck ramp: Fixed, portable ramp Ramp material: Wood covering Rear gear: Manual rear support legs Front gear: Two-speed telescopic landing gear with 24t dynamic and 50t static capacity ACCESSORIES & ADDITIONAL FEATURES 1 spare tire with holder 1 wheel chock Appropriately sized toolboxes mounted on the platform sides (galvanized or painted steel) Aluminum side and rear covers at the gooseneck Plastic mat under the rear bumper 1 leveling stand (optional) / Sheet metal side extensions (optional) / 10t electric winch (optional) PAINT & BLASTING Steel shot-blasted according to SA2.5 standard. Epoxy primer applied, finished with two-layer, oven-cured full acrylic paint in standard color A. Optional chassis color available.

Stanje: rabljeno, največja hitrost: 100 km/h, Izravnalni blok za polpriklopnik z nizko posteljo Mere glej slike ##### PROSIMO, POKLIČITE – E-POŠTE NE! ##### Nwedpfxey A D Rfo Am Teg

Stanje: rabljeno, največja dovoljena obremenitev: 34.000 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 10/2009, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 3.750 mm, skupna širina: 2.500 mm, skupna višina: 3.750 mm, Leto izdelave: 2009, Oprema: ABS, Zelo dober 3-osni nizkopodna prikolica Langendorf SATH 30/34 z ugrezi za kolesa, dvojno zložljive nakladalne rampe, tovorna površina 7.400 mm, sprednja ploščad 3.650 mm, zadnja ploščad 4.580 mm, od škripca do konca vozila 14.890 mm, nizko ležeča nakladalna postelja pribl. 500 mm in še več. Popolna nizkopodna prikolica za prevoz bagrov, tovornjakov in seveda viličarjev. Njdpewy E Ndefx Am Tewg

Stanje: rabljeno, največja dovoljena obremenitev: 21.130 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 11/2026, skupna širina: 2.540 mm, skupna višina: 1.980 mm, Oprema: ABS, Kässbohrer SLL 2-axle lowbed with hydraulic steering Highlight: Optionally available for rent as a complete unit together with the pictured truck. Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed semi-trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 traffic red Dimensions & Weights - Overall length: 13,210 mm - Overall width: 2,540 mm - Fifth wheel height (H5): 1,250 mm - Platform height (unladen): 910 mm - Platform height (laden): 300 mm - Platform length: 6,810 mm - Extension: 5,550 mm - Gooseneck length: 3,600 mm - Rear swing door: 2,100 mm - Platform thickness: 200 mm - Wheelbase: 10,530 mm - Axle spacing: 1,360 mm - Unladen weight: approx. 12,873 kg (±3%) - Gross weight (40 / 60 / 80 km/h): 42,000 kg - Total axle load: 24,000 kg - Permissible kingpin load: 18,000 kg (40 / 60 / 80 km/h) ---Running Gear & Axles - 2 axles - 2 hydraulically steered axles - Axles: BPW - Suspension: Air suspension - Suspension stroke: 260 mm (190 mm / -70 mm) - Additional raising of driving level by 40 mm possible - Load gauge for axle load display - Semi-automatic axle centering with warning light sensor ---Brake System - WABCO EBS 2S/2M - ABS (Anti-lock Braking System) - RSS (Roll Stability Support) - Brake system in accordance with UN ECE R13 ---Electrics & Lighting - 24 V LED lighting system - 2 × 7-pin + 1 × 15-pin socket - LED brake lights - LED rear and fog tail lights - Electrical system in accordance with UN ECE R48 & ADR - Rear LED work lights (2 pieces, reverse gear dependent) - Rotating LED beacon (1 piece) ---Tyres & Rims - Tyre size: 245/70 R17.5 - Tyres: M+S - 3PMSF (winter suitable) - Tyre pressure monitoring system according to R141 - Number of wheels: 9 complete wheels - Rims: Steel rims (Kässbohrer choice) - Spare wheel holder: 1 piece on gooseneck ---Steering & Controls - Hydraulic steering on both axles - Control panel in vehicle - Remote control for external steering control - Multifunctional WABCO Smartboard - Axle load indicator - Suspension control - Tyre & brake wear monitoring - Breakdown & system monitoring ---Chassis & Frame - High-strength steel S700 MC (ISO 1726) - Welded bogie bed connection - Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck - Adjustable and detachable gooseneck - 1 × 2 hydraulic cylinders, 220 bar operating pressure - Kingpin: 2 inch, bolted - Kingpin position: single ---Platform & Superstructure - 3 removable platforms with hardwood flooring - Each platform: 100 × 1,300 × 2,115 mm - Weight per platform: 225 kg - 2 × lashing rings per platform, each with 8,000 kg lashing capacity - Platform widening: 225 mm, galvanized - Extension clamps: 12 × 2 pieces, galvanized ---Load Securing Lashing rings: - 1 × 2 pieces 13.4 t on gooseneck - 7 × 2 pieces 13.4 t - 4 × 2 pieces 8 t in lowbed - 2 × 2 pieces 13.4 t - 3 × 2 pieces 8 t on rear platform Stake pockets: - 6 × 2 pieces in pool (50 × 100 mm) - 3 × 2 pieces at rear (50 × 100 mm) ---Accessories & Equipment - Aluminium front panel gooseneck: 360 × 1,550 mm - Aluminium side panels: 360 × 1,900 mm - Aluminium rear panel: 360 × 2,480 mm - Toolboxes right & left (500 × 350 × 400 mm) - Central lubrication system Nwjdpjycnbajfx Am Tsg - Side underrun protection as per ECE R73 - Warning...

Stanje: rabljeno, lastna masa: 16.200 kg, največja dovoljena obremenitev: 52.400 kg, skupna masa: 68.600 kg, konfiguracija osi: 3 osi, prva registracija: 06/1979, dolžina tovornega prostora: 7.800 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 1.380 mm, skupna višina: 131.000 mm, vzmetenje: jeklo, velikost pnevmatike: 445/65R22.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, osi Kässbohrer, listnato vzmetenje, prisilno vodenje, pritrdilne zanke, dvo-delne nakladalne rampe, sprednja opora, dvojna pnevmatika. Nadgradnja: širina ramp 750 mm, sedlena višina 1550 mm, vladarski zatič 3 ½", 4 x 13t osi, 4 osi hidravlično prisilno vodene, skupna dolžina 13.100 mm. PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Nwsdpfx Aowh Uipem Tjg

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) Nedpfx Astpta Dom Towg ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: rabljeno, največja dovoljena obremenitev: 85.100 kg, skupna masa: 106.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2009, dolžina tovornega prostora: 19.390 mm, širina tovornega prostora: 2.470 mm, skupna širina: 2.550 mm, skupna višina: 1.950 mm, Oprema: ABS, techn. možno: 8 x 14 t. osi, ABS, EBS, BPW osovina(e), podizne osovine, hidraulično vešanje, 6 osovina hid. prinudno upravljanih, 1. + 2. osovina - podizna osovina, bubanj kočni sistem, 13 prstenova za vezivanje tereta sa svake strane, 8 x džepova za stube sa svake strane, 2 x šine za džepove za stubove po sredini teretne površine, rotaciono svetlo pozadi, vučna kuka, visina utovarne platforme: cca 1500 mm, vozilo može biti oblepljeno i/ili ispisano reklamama. SI82739 Nwsdpfxjv I It Ne Am Tjg Naša ponuda je generalno bez novog TÜV pregleda. Ukoliko je potreban novi TÜV pregled, rado ćemo Vam poslati ponudu naših partnerskih radionica! Vozilo može biti oblepljeno i/ili ispisano reklamama. Primjenjuju se naši opšti uslovi isporuke i plaćanja. Rado ćemo Vam izraditi ponudu finansiranja ili lizinga za ovaj objekat. Molimo Vas da nas kontaktirate!