Hapert Priklopnik Z Delovno Ploščadjo nakup rabljenega (31.449)

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes Rodpfx Alov D Tbkexow ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (results in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reverse lights at the rear (activated by reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets at front and rear * Support winch at front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, one on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with a total external width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45° bent with 2 t lashing force every 480 mm * Installation of 3 t lashing brackets possible every 600 mm - 5 x 3 t UVV-lashing brackets mounted per side * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end crossmember) * Various drillings in front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Storage compartment under the loading platform at the rear, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from CW 39/2026

Stanje: rabljeno, največja dovoljena obremenitev: 36.300 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 05/2027, 24 months warranty from initial registration, hydraulically steered, NATO socket, central lubrication system, saddle height 1120 - 1300 mm, loading height 1340 - 1520 mm depending on saddle height, 10 t lashing rings in the outer frame spaced 1,200 mm, overlength sign, remote control, removable LED beacon, 220V socket, extension lights, 3-axle telescopic semi-trailer, extendable once up to 7,500 mm (in 500 mm steps), loading floor 28 mm hardwood, 10 t lashing rings in the outer frame (spacing 1,200 mm), stake pockets in the outer frame for stakes 81 x 51 mm, removable front wall made of steel, 1,800 mm high. Redomhd Ryspfx Alxew

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as Return-to-Ride (RtR) valve ----Drawbar: Drawbar, 1,200 mm long with 40 mm draw eye and height adjustment via tension spring & turnbuckle ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool (for axle load display – front and rear separately) * Tire pressure monitoring system with display possibility in the truck via EBS signal, no installation required on the truck side * 15-pin power connector * LED lighting 12/24 V * LED beacon (removable) at the rear ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle (FA) plastic quarter mudguards with spray protection * Rear axle (RA) straight galvanized steel mudguards with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, powder-coated black, mounted right side * Box in rotating frame for accessories, with folding lid, 2 pcs. container locks permanently fitted (directly after the rotating frame platform) * 2 galvanized steps on the rotating frame, left and right ----Low-loader Platform: * ROBOT-welded anti-slip covering to the steel plate of the rotating frame platform (protruding weld beads) ----Load Securing (Load Securing Package consists of): * 2 lashing eyes (13.4 t) front left & right at the front wall crossmember * 1 pair of UVV lashing rings (13.4 t) at the front & rear, and 3 pairs UVV lashing rings (10 t) each side, pivotable and lowerable, loadable in all directions and recessed in the outer frame * 3 stake pockets each side with simultaneous 2 t lashing capability * Profifix lashing rail lengthwise in the center axis, in the flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m total width (not on rear slope) * Widening planks stored in the middle of the loading area ----Ramps: * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for future retrofitting of hydraulic ramp shifting ----Excavator Arm Rest: * Excavator arm rest over rear axle, continuous up to the end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned laterally in the longitudinal frame Rjdpfotplwiox Alxew ----Loading Height: * Loaded approx. 910 mm +/- 20 mm air suspension ----Coating/Paintwork: * Chassis, rotating frame, folding outriggers, fall supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tanks, drawbar painted in a black tone ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle Rodjl Th I Aspfx Alxsw ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2023, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, Oprema: ABS, Schwarzmüller platforma - teleskopska - zadnja krmiljena os - pocinkana Izvlek 4.000 mm Zračno vzmetenje Tla pod iz trdega lesa Žepi za kole z vključenimi koli Aluminijasta platišča Tabla za izredne širine Rsdsy Tr D Ujpfx Alxew Zunanji okvir z odprtinami Letva za kole Zadnja krmiljena os SAF Dvižna os Pnevmatike 385/65R22,5 Pršenje s cinkom

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered Rodpfxswvzg Re Alxew * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 14.910 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.550 mm, Oprema: ABS, Celotno zalogo vozil z vozili, ki so na voljo takoj ali v kratkem roku, najdete na naši spletni strani. Izvleček opreme. Popolna oprema na zahtevo. Ogrodje: * Zvarjena konstrukcija iz visoko kakovostnega jekla s prečnimi nosilci in zunanjim okvirom Polica za rampe: * Polica za rampe med vzdolžnimi nosilci Zaščita podvozja: * Fiksna zaščita podvozja v skladu z direktivo ECE R58-03 * Stranska zaščita in zaščita podvozja skladno s predpisi EU Sprednje podpore: * Sprednja podpora z dvostopenjskimi ročnimi nogami (2 x 12 t) Zadnje podpore: * Zadnja podpora z blokirnimi padajočimi nogami Premi: * 2 x 10 t SAF-premi s bobnastimi zavorami, nizko vzdrževalna zračna prem, dvižni in spuščalni mehanizem s skupnim dvigom približno 180 mm, zavorne obloge brez azbesta. Prem z nosilnostjo 10.000 kg * Jekleni tlačni zračni rezervoar * Kolesa centrirana po sredini Pnevmatike: * Pnevmatike 235/75 R 17,5, na jeklenih platiščih, 8-krat, proizvajalec po naši izbiri * Nadzor tlaka v pnevmatikah, ki javi prenizek tlak v pnevmatikah Zaščita pred brizganjem: Rodpfx Alozgqncjxew * Plastični blatniki, zaščita proti blatu Privez tovora: * 6 parov pritrdišč, razporejenih po 8 t enakomerno na zunanjem okvirju * Poševno in perforirano zunanjo ogrodje za obešanje kavljev pri zaprti bočni steni * Žepki za kole: 3 pari vvarjenih žepkov za kole, notranja mera za kole približno 80 x 50 mm, razporeditev enakomerna Zavorni sistem: * Samodejni, obremenitveno odvisni, dvovodni pnevmatski zavorni sistem skladno z EU predpisi s federsko parkirno zavoro (vključno z enim razbremenilnim ventilom), EBS priključki za zrak rdeče/rumene spiralne cevi za prikolico Talna površina: * Trdolesna tla približno 30 mm z Z-profil deskami Sprednja stena: * Kot odstranljiva stranica, približno 600 mm visoka Svetlobna/električna oprema: * Elektrika: 24-voltna svetlobna oprema v skladu s StVZO * Večkomorni zadnji LED-lučniki s vgrajeno elektroniko in utripajočimi stranskimi označevalnimi lučmi * Dodatno pri prikolici luč za ohranjanje sledi * Sprednje spodnje pozicijske luči, bele (pri odobritvi v državah EU in CH obvezne) Elektrika: * Priključki prikolice 2x7-polni * Priključek prikolice 1x15-polni * Nosilna plošča za dovodne cevi na prečni sprednji nosilec, cevi trdno nameščene, brez ločenih priključkov, dovodne priključke levo Pribor: * Priporne zagozde v skladu s StVZO * Priključna okrogla luč zadaj * Dobava dodatne 40 mm vlečne naprave (GG maks. 13.500 kg) Premaz: * Podvozje cinkano in prašno lakirano * Okvir podvozja s kakovostno vročo cinkano zaščito in naknadnim prašnim premazom za optimalno zaščito proti koroziji, površina lahko kaže brazdasto strukturo zaradi vročega cinkanja * Standardni premaz za nadgradne dele Barva: * RAL 3002 karmin rdeča * Sredinski in kotni stebrički: KTL + prah, RAL 3002 karmin rdeča * Stranice: RAL 3002 karmin rdeča * Vlečna cev: vroče cinkano * Opozarjamo, da lahko zaradi velikosti podvozja in izbranega postopka premazovanja (vroče cinkanje) pride do nepravilnosti na površini. To lahko vključuje cinkove kapljice, viseče kaplje, cinkove sledi, ukrivljenost ipd. Na to nimamo vpliva in to kasneje ne predstavlja pravne napake v izgledu. Označevanje kontur: * Stranski odsevni kontur trak – rumen * Zadnji obkrožajoč odsevni trak – rumen Dodatna oprema: * Zadnji izvlek približno 800 mm s fiksno zaščito podvozja na kolesih

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position Rjdpfx Ajq Euakelxow * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning plate sets front & rear * Contour tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon rear * 24 V - 15-pin and additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, continuously height-adjustable * Powder-coated steel toolbox and spare wheel holder, basket design, right side * Front closed single plastic mudguards * Rear straight steel mudflaps, each with spray suppression (anti-spray) * Side underrun protection * Extended offset bend by 500 mm to the front * Turntable platform extension at the front by 520 mm with 45° corners and 3 integrated lockable storage compartments with covers * Chassis made from high-strength fine-grained steel * Decking above turntable platform from 50 mm softwood and on low loader platform from 60 mm softwood * Outer planks of loading ramps made from 50 mm bamboo wood * Four stake pockets per side (but no stakes included), each with a 2 t lashing point * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; front and rear, one pair of lashing rings (13.4 t) each on outer frame; four pairs of swivel and lowerable lashing rings (10 t) per side, loadable in all directions and integrated in the outer frame; two pairs of lashing rings (6.4 t) per side in excavator stick recess; eight pairs of galvanized folding outriggers for 3 m total width (not on the rear slope) * Widening planks stored on the left side in stowage compartment * Excavator stick recess above rear axle up to end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp movement on slide pipe from ramp shaft * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, turntable, loading ramps and mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer's warranty Redpfx Alerczm Dexow * Subject to errors and prior sale * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: Rsdspk D D Hspfx Alxjw * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on bulkhead ----Electrics / Lighting: * TPMS Tire Pressure Monitoring System * LED lighting ----Loading Platform: * Loading length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel bulkhead Rodpfx Asq Ra D Eelxsw * Hinged, trapezoidal-profile steel side panels with drop-side spring assist * Removable steel rear wall, can be stowed in front of the bulkhead between ramp mounts * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the bulkhead and end beam for 1.2 t lashing options ----Ramps: * One-piece mechanical drive-up ramps with spring mechanism, single-operator use, approx. 2,750 x 600 mm (collapsible down to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stanchions, and drive-up ramps * Side panels painted in RAL 9010 pure white * Painting of side walls in an individual RAL color available for a surcharge ----Information: * Subject to errors and prior sale * New vehicle with manufacturer warranty ----Delivery time: * Available from CW

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: Rjdpfxel Tihxs Alxjw * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin power connector * LED lights 12/24 V * RDÜ tire pressure monitoring system ----General Equipment: * Jost landing gear in the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation at the front bulkhead and rear incline for subsequently mounting container locks for 20" container transport * Design for 21 t GVW with reinforced frame and axles * Reinforcement kit for drill rig transport on the chassis * 50 mm softwood floor, clamped design * Preparation at the front bulkhead for retrofitting container locks * Bolted smooth sheet metal front wall * Split side walls made of trapezoidal-profiled steel sheet, foldable with central drop-in stake * Steel rear wall, insertable between the ramps (can be stored in a holder at the front bulkhead when not in use) * Rear stakes, bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * Profifix lashing rail in the longitudinal axis, central, for lashing up to LC 3,000 daN * One 10 t lashing ring in each front and rear corner * Load securing package with two 8 t retractable lashing rings per side, integrated into the outer frame; multiple holes in the front bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * Single-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Rear chassis incline approx. 860 mm ----Loading Heights: * Unladen: approx. 940 mm * Laden: approx. 910 mm ----Wheelbase / Tyres: * 1,810 mm * Tyres: 235/75R17.5 ----Painting: * Painting of side walls in desired RAL color (no special or metallic paints), changeable up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Example images ----Delivery Time: * Available from calendar week 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: Rjdpfx Alsl Th Hwjxow ----Braking system: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem compensation unit ----Drawbar / Flange drawbar eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre pressure monitoring system ----General fittings: * Jost landing gear at the front * Outboard folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Drop sides made of trapezoidal profile steel sheeting, foldable with tailboard spring assist * Steel rear wall insertable between ramps - holder for storage when not in use in front of headboard * Bolted rear stakes ----Load securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * One 10 t lashing ring in each front and rear corner, various drill holes in the front and rear cross-members for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis centre for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, headboard, rear wall, loading ramps, and folding supports hot-dip galvanized * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL colour available at extra cost * Axles, springs, air tanks, flange drawbar eyes and landing gear painted in a shade of black ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt Redpfsmi Tmasx Alxjw ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2013, dolžina tovornega prostora: 13.400 mm, širina tovornega prostora: 2.400 mm, Oprema: ABS, Rauw SA 393 Platto, dvigalna os SAF, transporter lesa/strojev z vdolbinami za kolesa Int. št. za povpraševanja: 0326237 * ABS * EBS * 3 osi z zračno vzmetenjem * Dvigalna os * SAF osi * Shranjevalna škatla na desni & levi strani / plastika Redpsyvct Djfx Alxsw Dolžina tovornega prostora: Dolžina: 13.400 mm * Širina: 2.490 mm Pnevmatike: 1. os: 265 / 70 R 19,5 30% zračno vzmetena / dvigalna os 2. os: 265 / 70 R 19,5 30% zračno vzmetena 3. os: 265 / 70 R 19,5 30% zračno vzmetena ----Cena: 23.900,- EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ????? Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2015, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 Platto, dvigljiva os, SAF osi Int. št. za povpraševanja: 1225958 * ABS * EBS * 3-osi, zračno vzmetenje * dvigljiva os Rjdpfx Alsyavigjxsw * kolutne zavore * SAF osi Dolžina tovornega prostora: dolžina: 13.600 mm * širina: 2.520 mm Pnevmatike: 1. os: 385/55 R 19,5 30% zračno vzmetenje / dvigljiva os 2. os: 385/55 R 19,5 30% zračno vzmetenje 3. os: 385/55 R 19,5 30% zračno vzmetenje ----Cena: 3.900 EUR + 19% DDV Za dodatna vprašanja smo dosegljivi na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ????? Pridržujemo si pravico do napak v besedilu, pomot in vmesne prodaje.

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2013, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 platforma z dvižno osjo, aluminijaste stranske stranice, nosilci PREVOZ JEKLA Int. št. za povpraševanja: 0326236 * ABS * EBS * 3 osi z zračno vzmetenjem * Dvižna os * Kolutne zavore Redpfx Aeyulw Njlxjw * BPW osi * Aluminijaste stranske stranice * Nosilci / stebrički Dolžina tovornega prostora: Dolžina: 13.600 mm Širina: 2.520 mm Pnevmatike: 1. os: 385 / 65 R 19,5 20 % zračno vzmetenje / dvižna os 2. os: 385 / 65 R 19,5 20 % zračno vzmetenje 3. os: 385 / 65 R 19,5 20 % zračno vzmetenje ----Cena: 9.900,- EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ???? Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 29.100 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2005, dolžina tovornega prostora: 13.520 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.550 mm, Leto izdelave: 2005, Oprema: ABS, 3-Axle Dinkel Dropside Semi-Trailer VIN: D17042 Chassis / Attachments: * Air suspension // Raise and lower function * 3rd axle forced steering * Jost landing legs * 3 x Daimler-Benz axles with disc brakes * Tyres: 445/40 R22.5 * Tyre tread depth remaining: axles 1+2 approx. 60%, axle 3 approx. 70% * 2 x PVC tool boxes * Forklift mount * 4 x extension boards Body: * Dropside semi-trailer * Forklift mount Weights: * Gross weight: 36,000 kg * Unladen weight: 6,900 kg * Payload: 29,100 kg Other: * German semi-trailer ---- New general inspections / safety checks or weight downgrades/upgrades available on request. We are happy to assist you in obtaining export/transit licence plates, and can also arrange delivery of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for typographical & printing errors, subject to change, prior sale, and errors!----Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in trading new and used commercial vehicles. On 11,000 sqm you will find a wide range of vehicles. Our company philosophy is characterised by fairness and reliability. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist with the purchase or sale of vehicles. Rjdpfx Ajy N Hvwslxjw See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Arranging special transports We are happy to assist you in organising special transports. Transit / export licence plates We are happy to assist you in obtaining export/transit licence plates.

Stanje: rabljeno, največja dovoljena obremenitev: 30.170 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2012, dolžina tovornega prostora: 13.640 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, Oprema: ABS, Ploskovna nadgradnja, talna podloga iz vezane plošče Siebdruck, neprekinjene odprtine za pritrditev v zunanjem okviru, 4 žepki za vstavitev stebrov na vsaki strani, JOST podporne noge, izvlečne opozorilne table, ABS, EBS, BPW EcoPlus os/i, kolutne zavore, zračno vzmetenje z dvigom in spustom, 1. in 3. os – dvižna os, 2x zaboji za orodje, priprava za rotacijsko luč zadaj, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Rodpsyytfyefx Alxjw SI86626 Naša ponudba je načeloma brez nove tehnične kontrole (TÜV). Če želite novo TÜV kontrolo, vam lahko pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Uporabljajo se naši splošni pogoji dobave in plačila. Za ta objekt vam z veseljem pripravimo ponudbo financiranja ali leasinga. Kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2007, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.500 mm, skupna širina: 2.550 mm, skupna višina: 3.200 mm, Oprema: ABS, Extending trailer with total length adjusting from 7,700 to 21,300 mm; electric hydraulic pump; manual pump for hydraulic system; NATO external jump start socket; 3 central stanchion rail(s) on the loading surface; 10 stanchion pockets per side; 10 pairs of heavy-duty lashing rings recessed into the floor; all-round warning light/rear; JOST landing gears; ABS; EBS; axle(s); axles are hydraulically steered; drum brake system; air suspension with lift-lowering device; central lubrication system; vehicle may be decorated or labeled with advertising. SI86629 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly make you an offer through our partner workshops! The vehicle may be decorated or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing quote for this item. Redpeyumi Hofx Alxjw Please contact us!

Stanje: rabljeno, največja dovoljena obremenitev: 32.880 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, Oprema: ABS, Schmitz Cargobull SPL 24/L-13.62EB Flatbed Trailer * Flatbed semi-trailer * Front wall 1,200 mm Rsdpfxjt Dhfmo Alxjw * 12 container locks / twist locks (1 x 40ft, 2 x 20ft and 1 x 20ft) * Continuous lashing holes in the outer frame * 4 extendable warning panels with position lights * Main beam height: front 156 mm, rear 428+28 mm, Smart Generation * Premium distributor with 3 sockets: 2x7-pin (DIN ISO 3731 + DIN ISO 1185) and ISO 12098 * 8 center stake pockets (8 t floor rating), for 70/70 stakes * 8 pairs of additional stake pockets with stake retention in the external frame for 70/70 stakes * Load capacity per additional stake: up to 400 kg at 1 meter height * 1 row of 70x70 stake pockets, transverse for load securing approx. 2,600 mm before the front wall * Open-top storage box for additional stakes * 16 pairs of lashing rings, 4 t tensile force per ring, per EN 12640 * 28 mm plywood floor, max. 8,000 kg forklift axle load, strength tested to DIN EN 283 * Air suspension * Pneumatic controls * Lift axle * Disc brakes Subject to prior sale and errors excepted! Sale is subject exclusively to our General Terms and Conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some discrepancies may result from data transfer errors in the systems of various platform providers. Therefore, we advise that all information is provided without guarantee and does not represent a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it provides information for contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Stanje: rabljeno, največja dovoljena obremenitev: 33.870 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2024, naslednji pregled (TÜV): 12/2026, skupna širina: 2.550 mm, skupna višina: 2.635 mm, Oprema: ABS, žerjav, DIMENZIJE IN TEŽE ? Dolžina šasije 13.300 + 200 mm ? Dolžina nakladalnega prostora 13.500 mm ? Širina nakladalne površine 2.475 mm ? Skupna širina 2.550 mm ? Višina nakladanja pribl. 1.435 mm ? Skupna višina pribl. 4.000 mm ? Prednji previs 1.200 mm ? Zadnji previs 3.800 mm ? Medosna razdalja 8.000 mm ? Razmak osi 2.020 mm ? Višina vratu 270 mm ? Višina sedelne sklopke 1.165 mm ? Sedlarski tlak 15.000 kg ? Skupna osna obremenitev 27.000 kg ? Dovoljena skupna masa 42.000 kg ŠASIJSKI OKVIR ? Raven okvir z dvema vzdolžnima nosilcema iz I-profila ? Prečno vpete prečke na razdalji pribl. 550 mm ? Vzdolžna nosilca hkrati služita kot vodilo za žerjav ? Širina vodil žerjava 1.300 mm ? Primerno za premični nakladalni žerjav do 16 tm ? Rob U-profila 140 x 100 x 4 mm z V-utorom ? Fiksni dvižni klančini za žerjav do 16 tm ? Dolžina klančine pribl. 350 mm ? Zadnji previs brez lesenega poda ? Zadnji prečni zaključek iz nerjavečega jekla ? Demontažni svetlobni nosilec ? Fiksni jekleni odbijač POD ? TÜV-certificiran pod po celotni nakladalni površini ? 4 mm jekleni pod med vzdolžnimi nosilci ? Neprekinjen jekleni pod tudi v srednjem delu STRANICE ? 2 x 5 zložljivih in snemljivih aluminijastih stranic ? Višina stranic pribl. 1.000 mm ? Izvedba s 3 tečaji na stranico ? Kinnegrip-stebrički v aluminijasti izvedbi K20 ? Aluminijasta pregrada ? 4 x 2 žeple za stebričke ? 2 natakljivi stebrička ZAGOTAVLJANJE TOVORA ? 29 pritrdilnih ušes, vsako z nosilnostjo 2,5 t ? Dodatne pritrdilne možnosti 2,5 t v V-utoru ? TÜV-certificirano zagotavljanje tovora ? Največje število pritrdilnih točk v zunanjem okviru RAZSVETLJAVA IN ELEKTRIKA ? 24-voltna električna napeljava ? 7-polna ISO-N vtičnica ? 7-polna ISO-S vtičnica ? 15-polna ISO-vtičnica ? EBS-priključek ISO 7638 + 24N ? Intertruck Flatline LED zadnje luči ? LED-meglenka ? 2 LED delovni žarometi pri podpornih nogah ? 2 LED delovni žarometi med osjo 2 in 3 ? 2 LED vzvratni in delovni žarometi zadaj ? 5 rumenih LED stranskih označevalnih luči na vsaki strani ? LED obrisne luči zadaj ? LED obrisne luči spredaj ? LED osvetlitev registrske tablice ? Odsevni trakovi ob strani in zadaj v skladu z EU PODVOZJE ? 3 osi ? Zračno vzmetenje ? Kolutne zavore ? ABS ? EBS ? Krmiljena izvedba osi OPREMA ? Plastično držalo za registrsko tablico ? Podvozna zaščita skladno z evropskimi direktivami ? Fiksni dostop zadaj levo in desno ? Dostopni stebrički ? Aluminijasti zračni rezervoar ? Zagozda s pritrditvijo pri podpornih nogah ? Široki blatniki Wiese ? TÜV-certifikati za nadgradnjo in pod PRIPRAVA ZA ŽERJAV ? Pripravljeno za Kennis R16/71-3 New ? Premični nakladalni žerjav ? Vodilo žerjava integrirano v podvozje ? Dobava brez nakladalnega žerjava Barva: Redszftf Uepfx Alxsw ? Šasija RAL 9005 globoko črna ? Robni profil RAL 9005 globoko črna ? Prednja stena RAL 9005 globoko črna ? Odbijač RAL 9005 globoko črna ? Osi in pesta črna ? Jeklena platišča standardne barve ? Svetlobni nosilec pocinkan in pobarvan belo ? Krmilna palica in okvir pocinkana ? Stranice eloksirane ? Podvozna zaščita barva aluminija OBSEG DOBAVE ? TÜV-certifikati za nadgradnjo in pod ? Popolna priprava za žerjav Kennis R16/71-3 New ? Dobava brez nakladalnega žerjava

Stanje: novo, največja dovoljena obremenitev: 19.470 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 930 mm, Leto izdelave: 2026, Oprema: ABS, now available for immediate delivery!!!!! JUMBO FLATBED TRAILER KRONE 3-axle ADP 27/ zLNT4 BS / MULTILOCK/8600 mm/BPW Brand/Manufacturer: KRONE First registration: NEW VEHICLE Dimensions: 8600 x 2480 x 930 mm Gross vehicle weight: 24,000 kg Unladen weight: 4,420 kg Payload: 19,580 kg Air suspension lift/lower Drum brakes Spare wheel holder ABS EBS Axle make: BPW ECO Anti-slip phenolic plywood floor Lashing rings Tool box Body paint: black Chassis paint: black Tyre configuration: 12-fold Tyre condition: 100% Front axle tyres: 235/75 R 17.5 Rodpfey U R T Rox Alxjw Rear axle tyres: 235/75 R 17.5 MULTILOCK OUTER FRAME along the entire length BPW eco drum brakes 3 x 9,000 kg axles Extendable drawbar 2,000 – 2,400 mm Front and rear air suspension (raise/lower) Technical max possible gross vehicle weight: 27,000 kg ABS/EBS system 30 mm phenolic plywood floor Forklift loadable up to 5,460 kg axle load Steel front wall 1,200 mm high Wheelbase: 8,545 mm / Axle spacing between 2 & 3: 1,310 mm Overall length: 10,390 mm 880 mm lowered All information without guarantee, subject to prior sale!! If you have any questions about this or other vehicles, please call us. If you have any questions about this or another trailer/car, please call us.

Stanje: rabljeno, največja dovoljena obremenitev: 949 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, prva registracija: 02/2026, dolžina tovornega prostora: 4.010 mm, širina tovornega prostora: 188 mm, višina nakladalnega prostora: 110 mm, skupna širina: 2.450 mm, skupna višina: 860 mm, A13 GW2616429 Rjdpfjym Igdex Alxew Večnamenski transporter 4018, proizvajalec TEMARED, tip DMC, . , Skupna masa: 1300 kg, 400x184 cm, z inercialno zavoro, 100 km/h (opcija), z zložljivo nakladalno rampo (opcija), nizkopodna prikolica, z možnostjo spuščanja podvozja Višina nakladanja: 400 mm Pridržujemo si pravico do napak in predhodne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 29.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2008, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2008, Oprema: ABS, * Manufacturer: Wilken * Trideck forced steering, 3rd axle * Lift axle * Mounting bracket for truck-mounted forklift * 500 mm aluminum side walls Rjdpfswaph Rox Alxow * SAF axles * Full air suspension * Disc brakes