Fliegl Dts 300 3-Achs Tiefl 6,5M Parab Hydraulik nakup rabljenega (42.087)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202036640, lastna masa: 6.213 kg, največja dovoljena obremenitev: 35.787 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2025, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.310 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rumena, The images are archive photos; the vehicle may still be in use! Coupling height approx.: 1,200 mm Chassis – Tipper Semi-Trailer Basic lightweight construction, kingpin plate with replaceable 2" kingpin, curved front wall (patented). Folding underrun protection, underrun protection with "spring assist" for easier operation Integrated mudguard bracket with stone-repellent surface Axles & Suspension SAF disc brake axles with 430 mm disc diameter (axles/chassis laser aligned) for reduced tire wear and lower fuel consumption Air suspension 1st axle: automatic lift axle with forced lowering and start assist, activated by braking three times; start assist is functional up to 30% axle overload and up to max. 25 km/h. Braking System 24 volt EBS (electronic braking system) with EBS socket at the front (without connection cable); test port for brake cylinder pressure routed outside at EBS module, with raise/lower valve. Paver brake, electrically operated from the truck without truck-side installation; automatic tipping suspension lowering with shut-off valve. TPMS (Tire Pressure Monitoring System) as per ECE R 141; display via screen in the tractor unit through EBS, no truck installation required (system compatibility in tractor unit required; only with standard tires). Axle load detection via EBS CAN-bus signal, displayed in cab; truck must be suitably equipped, no truck-side installation. Wheels and Tires 385/65 R22.5 steel rims Electrics Side amber LED lights synchronized with indicators (flashing side marker lights) 2 white LED position lights at front 2 white/red LED lane marker lights at rear Guedpfxsyylapj Aiaof LED work lights on both sides; 2 additional work lights recessed into the rear Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling (fixed, NW 48 mm). (without hose connection) Operated hydraulically via truck PTO. Body Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Angled front wall with external hydraulic cylinder mount. Interior step on front bulkhead. Greenline – conical and aerodynamic body shape "Membrane" rear wall Rear wall is a hydraulically operated tailgate opening upwards, approx. 2,200 mm clearance height Sidewalls continuously 5 mm thick, floor continuously 8 mm thick Body with insulation, Fliegl Asphalt Profi Thermo: body insulated at front, sides, bottom, and rear with Fliegl Isotherm "Flip Top Sliding Cover", automatic rear closure with folding bows. Cover folds forward. Electrically operated cover with 7-pin plug (charging socket) at the front, no connection cable, no truck install; operation at the trailer and via radio remote control. Operating Notes For transporting salt, lime, etc., we recommend using a hoist cylinder with a hard-chromed piston rod to prevent corrosion from the cargo. The stated total weight is technically achievable; depending on the cargo, total weight may not be attainable while observing legal axle, support, and kingpin loads. (Incorrect load distribution may cause poor driving and tracking behavior) Paintwork Frame: DB 7350 Nova Grey (10-year corrosion warranty) Landing legs: black coated Body: RAL 1007 Narcissus Yellow Tarpaulin: RAL 7038 Agate Grey

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802032235, lastna masa: 4.983 kg, največja dovoljena obremenitev: 33.017 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2022, dolžina tovornega prostora: 13.990 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.120 mm, skupna dolžina: 13.990 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5", stanje pnevmatik: 100 odstotek, barva: svetlo zelena, Attention: The images shown are archive photos! The vehicle may still be in use! Gsdpfx Aijww Iczoajuf Chassis for Container Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Container mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot container flush with rear New locking positions for improved fifth wheel load for flush 20-foot containers Rear lighting system protected and integrated into the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20-foot or 1 x 40-foot (without gooseneck tunnel) Middle telescope, 1st stage, rear extension extended, 1 x 40-foot with gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45-foot with gooseneck tunnel and rear overhang Middle telescope, 2nd stage, front extension extended, 1st stage; rear extension extended, 2nd stage: 1 x 45-foot container with long gooseneck tunnel and chamfered corners; middle telescope as telescoping central tube frame with bolt locking The transport of filled tank containers is excluded. With rear height adjustment in galvanized version and folding central supports for containers without tunnel Container guides at the front, plug-in Front crossmember with latest Vario V3+ New Generation locking system Front extension with roller bearing, manually extendable (for 45" containers with long tunnel) Rear extension with roller bearing, manually extendable by hand crank 24-ton two-speed landing gear, single-side operation, with straight lower part, without compensating arm 2 wheel chocks with holder Side underrun protection, aluminum Rear underrun protection, galvanized steel Extendable rear underrun protection for 45-foot containers Full-width rear mudflaps (not applicable if forklift holder is fitted) Half-shell mudguards With anti-spray mudflaps according to EU standards Rear impact protection Spare wheel carrier for 1 electric wheel, with mounting kit 1 storage box for fire extinguisher up to 6 kg 1 fire extinguisher (ABC powder, 6 kg)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902032084, lastna masa: 4.140 kg, največja dovoljena obremenitev: 33.860 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.240 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: bela, Attention: The images shown are archive photos; the vehicle may still be in use! Aluminium Wheels Alcoa Dura-Bright Air Suspension 1st axle with automatic lift axle function, including forced lowering and start-assist feature, activated via '3x braking.' (Start assist is functional up to an axle overload of 30% and up to a speed of max. 25 km/h) 'Hot-dip galvanized lift axle mechanism' with 10-year corrosion-through warranty Electrics 24 Volt, Multi-chamber tail lights, lateral yellow LED side marker lights 2 white front position lights 2 white/red lane position marker lights at the rear 1 x 15-pin socket at the front, without connection cable 2 additional LED worklights integrated into the rear, switched via the reversing lights Hydraulics Gedpfx Aiswhfiyoaouf High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Taken from the specified vehicle Hydraulic actuation via truck PTO Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut Tipping Body Aluminium box body made of high-grade, abrasion-resistant material. Sloped front wall 5 mm thick, with external cylinder mount. Sidewalls made from 30 mm hollow-chamber profiles, neatly welded, with spill-reducing upper rail profile. Interior access ladder on front wall (not with Cramaro tarpaulin system). External shovel and broom brackets on front wall. Greenline – conical and aerodynamic body design "Membrane" rear wall Rear wall designed as a pendulum tailgate with double-jointed hinge, externally mounted, with double hook locking system. Rear wall with rubber seal – note: heat resistant up to max. 170°C! Floor throughout 6 mm thick. Standing platform with access ladder, bracket plate for air/electrics and brakes with generous clearance for optimum operability. Roll tarpaulin can be parked on passenger side (FR-right), with central locking on driver side (FR-left).

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014232, lastna masa: 5.900 kg, največja dovoljena obremenitev: 29.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 13.650 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.638 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, The images are archive photos! The vehicle may still be in use! Chassis: Semitrailer for Freight Forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" king pin Drive-over and suitable for use with construction/agricultural machinery up to max. 24,000 kg GVW and up to a maximum machinery width of 2480 mm (the track width of machines or vehicles to be transported must not exceed 2200 mm), hook-in bar for aluminium ramps at the rear (wider construction/agricultural machinery must not be loaded) Outer frame in new slightly angled design with "Load-Lock Profile" for lashing strap attachment 14 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t 6 pairs of recessed lashing rings in the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-sided operation, with straight base, without crossbar equalizer Free landing gear foot dimension or free swing radius to the rear approx. 1920 mm Rear support foldable 2x wheel chocks with holder Side underrun protection aluminium Rear underrun protection steel Quarter mudguards in front of and behind each axle Gujdpfexb D Swjx Aiajf With anti-spray splash guards behind each axle 1x spare wheel holder for 1 spare wheel, with fixing kit 1x spare wheel, same make as standard tires, steel rim Axles + Suspension SAF drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, additionally electronically controllable from the truck, incl. forced lowering and starting aid, no installation required on the truck (starting aid functions up to an axle overload of 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded piping for easy maintenance Spring-actuated parking brake 2 foolproof coupling heads front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Important: The drawbar trailer may only be towed by tractor units that ensure the effectiveness of ABS! With lift & lower valve Vehicle - Driving Stability System "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via tractor unit's screen via EBS, no truck installation (requirement must be met by the tractor unit. Only for standard tires) Wheels and Tires 235/75 R17.5 twin tires Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side amber LED lighting Side amber LED lighting connected to indicators "flashing side markers" 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front, without connecting cable Floor Phenolic plywood panels approx. 30 mm thick, for high point load capacity, forklift axle load up to max. 5,600 kg Front wall / Front corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner stanchions steel, volume design Front wall additionally covered on inside with 1,250 mm high phenolic plywood panel Frame hot-dip galvanised The images are archive photos! The vehicle may still be in use!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902036248, lastna masa: 7.272 kg, največja dovoljena obremenitev: 27.728 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 92 m³, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Monocoque colour: single tone, RAL shade freely selectable Chassis: Semitrailer for forwarding/logistics applications Fine-grain steel welded construction in lightweight design, all the way to the support legs; fifth wheel plate with interchangeable 2" kingpin 24 t, 2-speed landing gear, single-sided operation Extension ladder at rear Side-mounted door retainers Foldable splash guard for lighting unit Rear underrun protection 1 aluminium ladder approx. 3,550 mm, side-mounted holder 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Axles & Suspension BPW disc brake axles with 430 mm disc diameter Air suspension, first axle with automatic lift axle function, including forced lowering and starting aid, actuation via "3x braking" Braking System 2-line compressed air brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front 24 Volt EBS (Electronic Braking System) with EBS socket at front Note: The trailer may only be towed by vehicles that ensure ABS effectiveness! With raise/lower valve Vehicle stability control system "TPMS" Tyre Pressure Monitoring System per ECE R 141, display in towing vehicle via EBS 1 additional air connection, front left/rear, with quick-release coupling Wheels and Tyres 385/55 R22.5" make as per manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lamps linked to indicators ("flashing side markers") 2 white front position lights in LED 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reverse light Sliding Floor Hydraulic System Hydraulic cylinder with sliding device installed in floor. Dual-circuit hydraulic system. Electric shifting for forward/reverse via wired remote control Operation hydraulically via truck PTO Hydraulic connection with hose at front wall and HDK threaded connector NW = 48 mm Sliding Floor (SB) Sliding floor with wear plate at rear Floor boards made of aluminium, 8 mm profile, grooved design Body (Monocoque, SB/Bin) Aluminium box body made of high-grade, wear-resistant material. Front and side walls from aluminium hollow profiles, top edge all around made from welded, wide special aluminium reinforcement profile, bottom with welded-in special frame. Moving bulkhead wall for improved unloading of cargo, with reinforced tarpaulin skirts at the bottom. Rear wall of aluminium hollow profile as double-leaf door, split 1/2 to 1/2, all-round special U-profile with stop and rubber seal, two external rotary bolt locks, locked at top and bottom. Rear wall with mechanical safety lock; operation at rear, left in direction of travel Standing platform with double-sided ladder access (left/right in direction of travel) and railing, for opening and closing the sliding roof tarpaulin 3 removable and swivelling cross bows for tarpaulin support + tarpaulin supports front at headboard and rear at tailgate Guedpoza S E Refx Aiaef Paintwork Frame: DB 7350 Nova grey "10 years anti-perforation warranty" Support legs: black coated Body: natural aluminium – can be painted any RAL colour as per customer request Roll tarpaulin: not yet installed

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014072, lastna masa: 7.300 kg, največja dovoljena obremenitev: 27.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.530 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 3.330 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" king pin, main frame reinforced for 25 t at the center of gravity over 3 m loading length in retracted condition 13 pairs of welded hooks on cross members for lashing strap attachment 23 pairs of recessed lashing rings in the outer frame, each rated 3.5 t 24 t 2-speed landing gear in reinforced version for uncoupling when loaded, single-side operation 1 spare wheel holder for 1 spare wheel 1 open storage compartment for stakes, with insertion option behind front wall for storage / or storage in compartment between extended main beams 4 pairs of recessed stake pockets in the outer frame, for square tubes 80x80 mm 5 stake pockets recessed centrally in the floor, for square tubes 80x80 mm, with reinforcement beams, each installed between the outer stake pockets except one 6 lashing/stake rails recessed crosswise in the floor over the full width to the outer frame (max. usable internal width between outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, distance between top and bottom approx. 60 mm (of the round steel). Bottom closed with angle plate, half open downwards. For lashing and plugging stakes, 80 x 80 mm. Rear pull-out ladder on right side in travel direction (FR) Godpfxjza Dyyj Aiasuf 5 x 3 pairs of stake pockets recessed in the outer sides of the main beams, for square tubes 80x80 mm, incl. reinforcement beams 10 “lightweight” plug-in stakes, W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing points on both ends 2 plastic toolboxes, W=600 / H=425 / D=460 mm, lockable Telescoping Extendable by max. 4,000 mm, lockable at approx. every 500 mm Main frame telescopic Locking with pneumatic pin system + frame lock indicator on both sides, operated via hand button; control for brake/lock and suspension on left in travel direction (FR-left) in front of the axles Storage compartment between the main beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle is steered, with automatic reverse lock via reversing light and additional lock function on vehicle via hand button Axle spacing offset 1310/1410 mm Air suspension 1st axle with automatic lift, additionally electrically controllable from the truck, with start assist Braking System 2-line compressed air braking system Spring-loaded parking brake 2 anti-mix-up coupling heads at front EBS Wabco, electronic braking system with EBS socket at front With raise & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in cab (truck must be equipped accordingly) Wheels & Tyres 385/65 R 22.5" steel rims Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white LED position lights at front 2 white/red LED lane guidance lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front 1 beacon with bracket, switchable via parking light 2 pairs of warning panels, LED illuminated and extendable to 3,500 mm Flashing side marker lights Side 7-pin sockets, positioned 2x at front panel, 2x at landing gear, 2x at rear underrun protection 1 additional 7-pin socket in the rear underrun protection 2 additional LED work lights, mounted top inside at front wall, with switch on front wall outside, left in travel direction (FR-left) Screen-printed wooden flooring approx. 30 mm thick 25 mm aluminium hol

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014200, lastna masa: 6.700 kg, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis, semi-trailer, forwarding version Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly chamfered, new design with "Load-Lock profile" for securing strap hooks 24 t, 2-speed landing gear, single-sided operation, with straight base, without telescopic adjustment Free landing leg corner dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of and behind each axle Spray flaps in front of the 1st axle and behind each axle with anti-spray, according to EC 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm (lock not included) Axles + Suspension Godpfsza A Txsx Aiaouf SAF drum brake axles "Axles/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by "3x braking" (start assist is active up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tyre damage Brake system 2-line compressed-air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle dynamic stability system Wheels and tyres 235/75 R17.5, brand according to manufacturer's choice Steel rims, factory silver Electrics 24 V, multi-chamber lamps, yellow LED side marker lamps 2 white marker lamps at the front 2 white/red lane marker lamps at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Floor Phenolic plywood approx. 30 mm thick, for high point load capacity, suitable for forklift axle load up to max. 5,600 kg Front wall / front corner posts 25 mm aluminium hollow section, 1,350 mm high, front corner posts in steel, volume design Country of registration / plates Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminium

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902028859, lastna masa: 5.660 kg, največja dovoljena obremenitev: 29.340 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, Chassis Semi-Trailer for Freight Forwarding Steel welded construction in reinforced design, only two longitudinal beams as double T-beams with steel/checker plate between the beams. Fifth wheel plate with replaceable 2" king pin. Protective cover for rear lights. 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer’s choice. 24 t two-speed landing gear, single-sided operation, with straight base, without compensating leg. Wheel chocks with holders. Side underrun protection in aluminium. Rear underrun protection in galvanized steel. Half-shell mudguards with anti-spray flaps according to EC specifications. 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit. 1 toolbox recessed between the longitudinal beams. 8 wooden stake pockets, as per manufacturer’s preference, bolted onto the frame, each with 2 telescopic wooden stakes adjustable from 1800 mm to 2800 mm, 7 t per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift & lower valve, axle safety cables. First axle with automatic lift, incl. forced lowering and start assist, activated by “3x brake” (start assist functions up to 30% axle overload and up to 25 km/h). Axle spacing offset 1410/1310 mm (suitable for combined transport) up to 44 t gross train weight. Wheels and Tyres 385/65 R 22.5" Manufacturer’s choice. Steel rims, factory silver. Brake System 2-line compressed air brake system. Spring-type parking brake. Axle load detection via EBS CAN-bus signal for display in truck cab (truck must be equipped accordingly, no truck installation, not a verified scale). Gusdpfx Aisza Anveasf 2 front coupling heads, non-interchangeable, without connection line. EBS (Electronic Braking System) with front EBS socket, without connecting cable. Note: The trailer may only be towed by tractors that can guarantee ABS effectiveness! “Safe Parking.” Electrical System 24 Volt, multi-chamber tail lights, side LED marker lamps in yellow. 2 white position lamps front. 2 white/red lane-control lamps rear. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cables. Front Bulkhead/Corners Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame. Approval / Signage Registration country: Germany Type approval according to EC 2007/46 Prepared for single-row license plate holder Contour marking with reflective tape per ECE R 048, white on sides, red at rear Warning sign per ECE-70 Paintwork Frame: DB 7350 Novagrau Landing gear legs: black coated Bulkhead: hot-dip galvanized

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801013475, lastna masa: 7.180 kg, največja dovoljena obremenitev: 28.820 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Available in multiple units. Fine-grain steel welded construction, saddle plate with replaceable 2" kingpin, additional splash guard made from sheet metal riveted to the underside floor, in the gooseneck area above the rear axle of the tractor unit as well as above the wheels on the vehicle. Reinforced frame version for vehicle loads up to the outer frame. Outer frame equipped with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushrooms recessed into the outer frame, each rated at 10 tons, 24 ton 2-speed landing gear, single-sided operation, with semi-rounded lower section and straight connection plate, featuring load compensation, foldable rear support, wheel chocks with holder, aluminum side underrun protection, steel underrun protection, quarter-fender mudguards in front of and behind each axle, with additional sheet splash guards over the wheels, fitted with anti-spray mud flaps according to EC standards, 1 plastic toolbox (600 x 425 x 460 mm), lockable. Container locks: 4 pairs of locking recesses embedded in the floor for 2 x 20-foot or 1 x 40-foot container, 4 pairs of container locking adapters (additional cross supports at the front and rear of the container required; the container must be evenly supported across the width; cross supports not included). Ramp attachment bar at rear extension across full width, mechanical rear extension with hand crank extendable by approx. 1,500 mm, lockable every 500 mm, includes extendable underrun protection with lighting. Lane area fitted with Lohr perforated sheet, central area with steel checker plate, storage space for drive-on ramps integrated in rear extension—usable only when rear extension is extended by approximately 1000 mm. For ramp transport with retracted rear extension, ramp storage is located on the right in front of the axles. One pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg. Electric cable winch, 24 volts, pulling force approx. 8,165 kg, centrally mounted at the very front, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers. Axles & Suspension: SAF or BPW drum-braked axles as selected by the manufacturer, air suspension, first axle with automatic lift axle, additionally electrically operable from the truck, including forced lowering and drive assist. Brake system: 2-line compressed air brake system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, EBS (electronic braking system) with EBS socket at the front (no connection cable provided), with raise & lower valve and fast venting, hold function in lowered position + auto-reset function, vehicle stability system, axle load detection via EBS CAN bus signal. Gusdpfx Aoza Aiyeiaof Wheels & Tires: 235 / 75 R 17.5" — brand per manufacturer's choice, twin-mounted steel rims. Electrics: 24 volts, LED multi-chamber lights, side yellow LED lighting, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, operated via parking light, 2 pairs of double LED-illuminated warning panels extendable to 3,000 mm, 1 additional 7-pin socket (ISO 1724) in the rear underrun protection, 2 side LED work lights (1 each on front left and right). Floor: Lohr perforated stee

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801012811, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: srebrn, multiple units available Gsdpfsza Agrox Aiaouf Chassis fifth wheel forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, reinforced frame for vehicle loading, outer frame with "Load-Lock profile" every approx. 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on top/outside of the outer frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminum side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, 1 spare wheel holder for 1 single wheel, incl. wheel mounting kit, 2 lockable plastic toolboxes, w=600 / h=425 / d=460 mm, container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, front-most position is a recessed fold-down lock, 10 pairs of stanchion pockets recessed in the outer frame, 70 x 40 mm internal dimension, 10 stanchion pockets recessed centrally in the floor, 70 x 40 mm internal dimension, 2 cross tie-down/stanchion rails recessed into the floor spanning the full width to the outer frame (approx. max usable interior width between external stake pockets 2170 mm), about 100 mm high. Includes 20 mm round steel rails at top and bottom, spacing about 60 mm (between rails); bottom end with angled sheet as closure, open downwards halfway. For lashing and inserting stakes up to 80 x 80 mm. Arrangement: Positions 2 and 4 according to Fliegl data sheet, 20 removable stakes, hot-dip galvanized, storage space for aluminium drive-on ramps, ramps can be inserted from the rear, 3 pairs of fold-down lashing points (10 t) in outer frame (1x in front of front wall and 2x at the rear) Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, includes forced lowering and start assist, actuated by "brake 3x", axle lift below recommended driving height, therefore no warranty for tire damage Brake system: 2-line compressed air brake system, color-coded routing for easy service, spring-type parking brake, 2 fail-safe coupling heads at front, no connecting line, EBS, electronic braking system with EBS socket at front, no connection cable, with raise & lower valve, 2 driving heights adjustable via manual knob: 1x for coupling height 980 mm, 1x for coupling height 1100 mm, ride height in combination with lift axle; when lift axle is raised, load/overall height increases by 50 mm, vehicle stability control system Wheels and tires: 435/50 R19.5, brand at manufacturer's discretion, steel rims Electrics: 24V, multi-chamber lights, yellow LED side lighting, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights: 1x each left/right in front frame, 2 additional LED work lights at rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning panels: LED-illuminated and extendable to 4,000 mm, additional 7-pin socket at rear underrun protection Floor: phenolic plywood, approx. 30 mm thick, on longitudinal beams for high point loading, suitable for forklift axle load up to max. 7,100 kg Front wall / corner stanchions: 25 mm aluminum hollow section, 1,350 mm high, steel corner stanchions in volume version, front wall inside also lined with 1,250 mm phenolic plywood, "Crash-Blocker", lower 140 mm inside with steel impact protection, storage compartment for insertable stanchions insi

Stanje: rabljeno, številka stroja/vozila: WFDFLT33901007921, lastna masa: 9.000 kg, največja dovoljena obremenitev: 26.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 15.150 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 15.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: črn, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/Technical Gross Weight: 35,000 / 39,000 kg Permissible/Technical Payload approx.: 26,000 / 30,000 kg Permissible/Technical Axle Load: 24,000 / 27,000 kg Permissible/Technical Kingpin Load: 11,000 / 12,000 kg Unladen Weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Overall width max.: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Low bed length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height (low bed) approx.: 900 mm Fifth wheel height approx.: 1,150 mm Kingpin mounting dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis | Fifth-Wheel Platform Haulage Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed into outer frame, each rated at 2.5 t 24 t, 2-speed landing gear, single-sided operation, with straight lower section, no lateral compensation Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear collision guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box, front bulkhead mounted Telescoping Central tube frame made of cleanly welded, interlocking telescopic frame sections. Extendable by max. 1,500 mm and lockable after approx. 1,500 mm, outer frame sections approx. 1,500 mm long for insertion into the outer frame when extended Locking by mechanical pin locking Axles & Suspension SAF drum brake axles Air suspension Gusdpfx Ajy Slp Ijiaef Brake System 2-line compressed air brake system Spring-loaded parking brake 2 error-proof coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: This trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Wheels & Tires 235 / 75 R 17.5 Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber rear lights, lateral LED marker lights (yellow) 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin error-proof sockets at the front, without connection cable Rotating beacon with holder, controlled via parking light (lamp removable) Floor Non-slip phenolic plywood panels approx. 30 mm thick, for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Where required in wheel arch areas: steel/chequer plate covering Bulkhead/Front Stakes 25 mm aluminium hollow section, 1,950 mm high, steel front stakes, full height in heavy duty design Certification / Signage With Dekra inspection and appraisal Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, lateral white and rear red Attention, the images shown are archive photos! The vehicle may currently be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000364, lastna masa: 6.120 kg, največja dovoljena obremenitev: 28.880 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- build tolerance Overall length approx.: 13,800 mm Max. overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loading height in low-bed, loaded approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis semi-trailer for haulage company Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping at the beginning of the low-bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly sloped new outer frame design with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for attaching lashing straps, mounted on the crossmember underneath the outer frame 24 t two-speed landing gear, single-sided operation, with straight lower section, without load equalizer Free landing leg corner dimension or free rear swiveling radius of approx. 1,920 mm Side underrun protection: aluminum Rear underrun protection: steel Quarter shell mudguards 9 pairs of lashing/ stanchion rails recessed across the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, spacing between bars approx. 60 mm. Bottom with angle plate as closure, half open downwards. For securing and inserting stanchions 80 x 80 mm (3 pairs in gooseneck, 6 pairs in low-bed area) 3 pairs of stake pockets recessed in the outer frame, internal dimension approx. 72 x 42 mm Axles & Suspension: Drum brake axles as per manufacturer’s choice "Laser-measured axles/chassis" for reduced tire and fuel consumption Gujdpfx Aijy Slhqoasf Air suspension Brake system: 2-line compressed air braking system Color-coded piping for easy service Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line EBS electronic braking system, EBS socket at front, no connecting cable Note: The trailer must only be towed by tractor units that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle stability system Wheels and Tires: 235/75 R17.5, manufacturer at the buyer’s discretion Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side lighting (recessed inward) 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin foolproof sockets at the front, no connecting cable 1 additional LED work light at rear, switched via reverse light Floor: Approximately 30 mm thick anti-slip plywood, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / front corner stanchions: 25 mm aluminum hollow profile, 1,350 mm high Country of registration / plates: Germany Inspection and certificate in Bosnia 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red at the rear Warning sign according to ECE 70 Painting: Frame: hot-dip galvanized incl. passivation “15-year guarantee against corrosion perforation” Front corner pillars: hot-dip galvanized Front wa

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with 'Load-Lock profile' for lashing strap attachment 24 t, 2-speed landing gear, single-sided operation Side underrun protection, aluminum Rear underrun protection, galvanized steel Quarter-shell mudguards in front of and behind axle assembly With anti-spray mud flaps compliant with EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fixing kit Axles & Suspension: SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser alignment' reduces tire wear and fuel consumption 1st axle automatic lift axle, additionally electrically operable from the truck Includes forced lowering and start-up aid, no installation required on truck Brake System: 2-line compressed air braking system Spring-loaded parking brake EBS by Wabco, electronic braking system with EBS socket at the front, without connection cable With raise & lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS CAN bus signal, display via monitor Wheels and Tires: 385/65 R22.5" / 6 steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side LED marker lights (amber) 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connection cable 2 additional LED work lights at the rear, controlled via reverse light Gedpsri Hihsfx Aiaeuf Floor: Approximately 30 mm thick phenolic plywood, mounted on continuous longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg at the bulkhead Drop-in Slats: 5 rows of aluminum V-insert slats 2 pairs of Vario steel slats, in conjunction with Vario beams for fore and aft load securing (then no insert slats required in the area of the steel slats) Rear Portal Doors: Double-winged, each with 2 internal lock rods. Tarp with welded horizontal and vertical belts Unladen weight: 5,960 kg Offer and pictures non-binding

Stanje: rabljeno, številka stroja/vozila: WFDFLT33902030059, lastna masa: 7.452 kg, največja dovoljena obremenitev: 27.548 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 92 m³, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", barva: črn, The images are archive photos; the vehicle may still be in use! Weights and dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Specified fifth wheel load permissible / technical: 11,000 / 12,000 kg Unladen weight (standard version) approx.: 7,452 kg +/- build tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Coupling height approx.: 1,130 mm Kingpin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis: Semi-trailer for freight forwarding High-tensile steel welded lightweight construction up to the support legs, fifth wheel plate with replaceable 2" kingpin Lashing ring preparation laterally in the floor (max. 13 pairs) 24 t 2-speed landing gear, one-sided operation, with straight lower section, no load equalizer Pull-out ladder at the rear Gsdpjwk Dc Refx Aiaouf Door retainers on the sides Wheel chocks with holders Side underrun protection made of aluminum Steel underrun protection with wide Fliegl mud flaps Foldable fender for light unit Quarter shell mudguards Rear impact guard Axles & Suspension BPW disc brake axles Air suspension 1st axle is an automatic lifting axle with forced lowering and start-up aid, activated via triple brake application Brake system 2-line compressed air braking system Colored line routing for easier maintenance Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with socket at the front, without connection cable Wheels 385/55 R22.5" Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated into the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Flow rate: 110 l/min Pressure: 250 bar Oil reservoir minimum: 100 l SB Body Box-shaped aluminum body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow profiles, welded all-around with a large special reinforcement profile at the top, with a special subframe welded in at the bottom. Moving wall for improved unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made from aluminum hollow profiles, as two-leaf doors, split 1/2 to 1/2, all-around with special U-profile with stop and rubber gasket, fitted with 2 external rotary bolt locks, locked top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in driving direction. With pivoting transverse brace at the top. Standing platform with ladders on both sides (left/right in direction of travel) and railing for opening and closing the sliding roof tarp. Removable, swiveling cross bars for tarp support + tarp support at front bulkhead and rear wall. Sliding tarp can be rolled to one side with 2 longitudinal tensioning straps, 3 side ratchet straps. At the front bulkhead and above the rear doors, the tarp is secured with hooks and rubber

Stanje: novo, lastna masa: 6.000 kg, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE HUMBAUR LOW-LOADER TRAILER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED LOADING RAMPS => 10 x 10-TON LASHING POINTS => 10 x 3-TON LASHING POINTS, outer frame => 8 x 2-TON LASHING POINTS, above wheels => SPRING-ASSISTED LIFTING DEVICE FOR RAMPS => 40 mm DRAWBAR => APPROX. 2,700 MM LONG LOADING RAMPS Guodped U A Tgofx Aiaef => APPROX. 750 MM WIDE LOADING RAMPS => TWIN TIRES 235/75 R17.5 INCH => LOADED PLATFORM HEIGHT ONLY APPROX. 860 MM => COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM => FRONT CORNERS BEVELLED => TWO FOLDING SUPPORT LEGS AT REAR => AND MUCH MORE => Delivery freight: 2.90 Euros plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Pictures may differ and serve only as an approximate reference => may show/include options subject to surcharge*

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Vehicle is from current production - available in approx. 2 weeks Vehicle / Body: Tipping Trough Gross Weight: 35,000kg / 39,000kg Unladen Weight: 5,500kg !!! Payload: 29,500kg / 33,500kg Total Length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Coupling height approx. 1,200mm Chassis – Semi-Trailer Tipper: - Fine-grained steel welded construction, basic lightweight design - 1x centre support leg - Folding underrun protection - Underrun protection with "spring assistance" for easier operation - Half-shell mudguards - Integrated “mudguard holder” with a stone-repellent surface - With antispray mud flaps only on the rear axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - “Axle/chassis laser measured" for reduced tyre wear and fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted front on curved chassis - 1st axle is an automatic lift axle, also electrically operable from the truck, including forced lowering and start-off assist, without truck installation (start-off assist is functional up to 30% axle overload and up to a max. speed of 25 km/h) Braking System: - 2-line compressed air brake system Coloured line routing for easy servicing. - Spring-actuated parking brake - 2 front foolproof coupling heads, without connecting line - 24 volt EBS, Electronic Braking System with EBS socket at the front, without connection cable - With raise & lower valve - Vehicle stability control system - Automatic tip lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5" European brand, manufacturer’s choice Electrics: - 24 volt, multi-chamber LED lights, side yellow LED marker lights, number plate illumination in LED (Note: with some tractors, diagnostic errors may occur even though functions are correct) Side yellow LED lighting linked with indicator - "flashing side marker lights" - Premium LED side marker lamps, each with 20 LEDs per unit - 2 white front position LED lights included - 2 white/red lane control rear LED lights included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, no connection cables - LED working lights mounted on both sides (activated via reverse light) - 2 additional LED work lights recessed at rear Hydraulics: Guedpfx Aevhyf Rsiaof - High-pressure cylinder max. 250 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm - Hyva make - Operated hydraulically via truck PTO - Hydraulic connection with hose and vehicle plug NW = 54 mm with large wing nut Tipping Body: HARDOX steel round trough in “Stone Master Design” of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Interior with ladder at front wall - Greenline – conical, aerodynamic body design - Shovel and broom holder on exterior front wall - "Membrane" tailgate - Tailgate as pendulum flap with "double-joint hinge", externally mounted with dual hook lock. 2 clamping bolts with toggle locks at the bottom on each side - Tailgate with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear- and weight-optimised structure - Fliegl S.T.E.P. – swivelling platform at front with folding ladder for side access LH side,

Stanje: novo, lastna masa: 1.150 kg, največja dovoljena obremenitev: 2.350 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.950 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 2,4 m³, barva: drugo, gradbena višina: 980 mm, delovna širina: 2.060 mm, Manufacturer: Brian James Trailers Model: Rear Tipper Cargo Tipper Gross Vehicle Weight: 3,500 kg, Tri-axle Payload Capacity: 2,350 kg Unladen Weight: 1,150 kg Dimensions of Load Bed: 4,000 x 2,000 x 300 mm Tyres: 195/60 R12C Loading Height: 680 mm Tipping Angle: up to 60° - Equipped with electric pump - New load bed design - Smooth-surface loading area - Swinging rear tailgate - Reinforced loading bed - Robust, stable sidewalls - Integrated lashing points - Safety and maintenance support struts - Tool/storage box - Spare wheel included - Lateral lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty Price includes vehicle registration certificate (Part II) and COC papers. We carry a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Free temporary transit plates on request. We perform repairs on trailers of all makes. Guodpfxew Df Rco Aiajf Additional accessories available upon request. Technical specifications, prices, and details are subject to change and errors excepted. We do not accept liability for mistakes or typographical errors. Features: - Automatic reversing mechanism - Rubber suspension axles - Tiltable load bed - Jockey wheel - Marker lights - Hot-dip galvanized - Braked - Inclusive warranty - Tipping angle up to 60° - Electric pump - New load bed design - Smooth-surface loading area - Swinging rear tailgate - Reinforced loading bed - Sturdy sidewalls - Integrated lashing points - Safety/maintenance support strut - Tool/storage box - Spare wheel - Lateral lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty

Stanje: novo, lastna masa: 1.100 kg, največja dovoljena obremenitev: 2.400 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.950 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 980 mm, delovna širina: 2.060 mm, Manufacturer: Brian James Trailers Model: Rear Tipper Cargo Tipper Permissible Total Weight: 3,500 kg, 3-axle Payload: 2,400 kg Unladen Weight: 1,100 kg Bed Dimensions: 3,600 x 2,000 x 300 mm Tires: 195/60 R12C Loading Height: 680 mm Tipping Angle: up to 60° Features: - Equipped with electric pump - New platform design - Platform with smooth surface - Pendulum tailgate - Reinforced loading bed - Robust side panels - Integrated lashing points - Safety support / maintenance stand - Storage box - Spare wheel - Side lashing points and net hooks - Integrated coupling lock - Modern lighting system - 5-year chassis warranty Price includes vehicle registration document (Registration Certificate Part II and COC papers) Guedpsw Df Eysfx Aiasf We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transfer license plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or printing mistakes. Features summary: automatic reversing system, rubber suspension axle, tiltable loading area, jockey wheel, marker lights, hot-dip galvanization, braked, including warranty, 60° tipping angle, electric pump, new platform design, smooth loading surface, pendulum tailgate, reinforced loading bed, robust side panels, integrated lashing points, safety support/maintenance stand, storage box, spare wheel, side lashing points and net hooks, integrated coupling lock, modern lighting system, 5-year chassis warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S1576, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 20 m³, vzmetenje: hidravlika, velikost pnevmatike: 600/55-R26,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.810 mm, največja hitrost: 60 km/h, barva: rdeča, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2025, Opis Podvozje lakirano u novosivoj: Optimizovano za korisnu nosivost s integriranim okvirom vozila Ukupna masa 31.000 kg, opterećenje na zadnjoj osovini do 20.000 kg, prihvaćeno opterećenje sedla 11.000 kg, međuosovinski razmak cca 1810 mm, Visina sedla cca 1400 mm Podizna nožica Teška kiper korpa 30 cbm s cilindrom napred Poluokrugli čelični bunker od Hardoxa 400, debljine 6 mm, cca 7.200 mm x 2.250 mm x 1.200 mm, kompletno čelična korpa grundirana, boja crvena Hidraulična zadnja stranica (potreban 1 dvosmerni hidraulički priključak) Kočioni sistem sa 2 kruga zraka 2 osovine s kočnicama, zadnja osovina upravljiva, automatski blokirajuća Godjyik R Ijpfx Aiaeuf Osovine s doboš kočnicama standard Čelične felne Izvedba za 60 km/h za Nemačku s TÜV dokumentacijom (uključuje kontur svetla, bočne oznake) Hidraulično vešanje Hidraulično preklopiva zaštita od podletanja Osvetljenje 24 V s 15-polnom utičnicom, bez spojnog kabla Zadnja kontur svetla (bela/crvena) Prednja poziciona svetla (bela) Označavanje kontura po ECE R 048 Prodaja podložna prethodnoj prodaji! Informacije bez garancije!

Stanje: rabljeno, prva registracija: 09/2016, barva: drugo, Leto izdelave: 2016, Oprema: ABS, = Dodatne možnosti in dodatna oprema = Drugo Gedpfxoy Avafj Aiaouf - Os BPW - Dvignjena os Drugo - Bobnaste zavore = Opombe = Fliegl, 2016, Os BPW, Os 1 dvigljiva, Bobnaste zavore = Informacije o podjetju = Bančni podatki: Račun Rabobank: 39.33.10.655 IBAN: NL73RABO0393310655 Hitra koda: RABONL2U - Pred izvedbo transakcije vedno preverite naše bančne podatke! - Rezervacija vozil brez pologa ni možna. - Pridržujemo si pravico do tiskarskih in besednih napak pri vseh ponujenih vozilih.

Stanje: novo, največja dovoljena obremenitev: 30.010 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: Term 48 months, down payment only the VAT, residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load area including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Aluminum side underrun protection Guodpjtrizksfx Aiasf Rear spray flap across the entire width Half-shell mudguards on 1st and 2nd axle with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, lateral on the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel carrier for 1 spare wheel, upright on the gooseneck right at the front. Spare wheel, make identical to the main tires, steel rim Storage box recessed in the gooseneck floor with lid; dimensions W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed lane area, ramped for entry, bottom length approx. 1,600 mm, depth approx. 400 mm. Note: Frame in the main beam area is 400 mm higher than the wheel recess 2nd pair of wheel recesses between the axles, recessed in the low-bed lane area, ramped for entry, bottom length approx. 600 mm, depth approx. 300 mm. Note: Frame in the main beam area is 300 mm higher than the wheel recess Extendable width up to 3,000 mm (not extendable in the rear bevel and not in the lower wheel recesses) (track width of the construction equipment or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks below the low-bed area 70 mm wooden planks for extension to 3,000 mm Lashing eyes on the low-loader 1 pair of lashing eyes, recessed in the front of the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) 8 pairs of lashing rings, integrated on top and side of outer frame, 10 t each 2 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets integrated in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 1 pair of folding lashing eyes, additionally recessed in the floor, 10 t each 1 inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 t each 1 on the gooseneck (protrudes over edge) 1 behind last axle, recessed in floor Drawbar coupling / turntable trailer hitch Towing bar with certified 50 mm towing eye, towing eye inclined 8° D-value at least 160 kN Axles & suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker balance) Wheels and tires 235 / 75 R 17.5" Manufacturer's choi

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 12.800 kg, največja dovoljena obremenitev: 44.200 kg, skupna masa: 57.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje vozilo Fliegl v skladu z vašimi zahtevami. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojeni posameznim željam kupca. Podvozje: polpriklopnik z nizkim ležiščem Jeklena varjena konstrukcija, sedlasta plošča z zamenljivim drugim zatičem kralja in dvema pozicijama za drugi zatič 24 t dvostopenjski podporni vitel, enostransko upravljanje Zložljiva zadnja opora 2 zagozdi za podvozje s pritrdilcem Stranska zaščita proti naletu iz aluminija 1 plastična orodjarna s polico, b =620/h =360/t =440 mm, z možnostjo zaklepanja s ključavnico Razširitve izvlečne do 3.000 mm Predal za lesene deske na labodjem vratu, spredaj prečno Lesene deske 70 mm za razširitev na 3.000 mm Teleskopski sistem Centralni cevni okvir iz natančno zvarjenih, teleskopsko prekrivajočih se delov okvirja izvlečno do maks. 6.000 mm in z možnostjo fiksacije na vsakih 1.000 mm Zavarovanje s pomočjo mehanskega zatičnega sistema s pomično mizo Pritrdilne ušice za nizkopodna vozila 2 para obročastih priveznih ušes, po 5 t, spredaj na labodjem vratu, 11 parov priveznih nastavkov zgoraj in ob strani v zunanjem okviru, vsak po 10 t, 2x na labodjem vratu, 9x na površini nizkega ležišča, prva privezna točka 250 mm od spredaj in zadnja največ 250 mm od zadaj, razdalja med ušesi ne več kot 1.100 mm 8 parov žepov za kolike, vdelanih v zunanji okvir, notranja mera 70 x 40 mm (prilagodljivi za 5 t obročasta ušesa, ni vključeno v dobavo) 3 para zložljivih priveznih ušes, dodatno vgrajenih v območju nizkega ležišča, vsak po 10 t: 1x začetek nizkega ležišča, 1x pred 1. osjo in 1x za 3. osjo Preme in vzmetenje SAF bobnaste zavore Premične/šasija lasersko merjena za zmanjšanje obrabe pnevmatik in porabe goriva Zadnji dve premi vodeni, z avtomatsko blokado vzvratne vožnje prek vzvratnih luči in ročno blokado z gumbom na vozilu Zračno vzmetenje z ventilom za dvig/spust Kolesa in pnevmatike 235/75 R 17,5, znamka Fulda Jeklena platišča v dvojni postavitvi, tovarniško srebrna Zavorni sistem Dvovodni zračni zavorni sistem Vzmetna parkirna zavora Sistem stabilnosti vozila Prikaz nosilnosti osi preko EBS-Canbus signala, za prikaz na zaslonu v kabini tovornjaka, tovornjak mora biti temu prilagojen, brez LKW instalacije (brez overjene tehtnice) 2 proti zamenjavi odporna priključna spoja spredaj, brez povezovalnih cevi EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Opozorilo: Priklopno vozilo lahko vlečejo le vlečna vozila, ki zagotavljajo delovanje ABS! Elektrika 24 V, večkomorni žarometi, stransko rumena LED osvetlitev 2 bela pozicijska žarometa spredaj 2 bela/rdeča označevalna žarometa zadaj 1 LED rotacijska luč z nosilcem, upravljana prek pozicijskih luči (luč snemljiva) 2 para opozorilnih plošč, dvojno LED osvetljene in izvlečne do 3.000 mm 2x 7-polni proti zamenjavi odporni vtičnici spredaj, brez povezovalnega kabla Godpfx Aiei Ri Hnoajuf Talna obloga Labodji vrat s prevleko iz jekla/protizdrsne pločevine Skladiščni prostor v naklonu labodjega vratu nato z 70 mm mehkim lesenim podom, v območju kolesnih vodil jekleni/protizdrsni sloj Zadnji naklon s 70 mm mehkim lesenim podom Stranske stene 25 mm aluminijasti votli profil, 400 mm visoke, spredaj in ob strani na labodjem vratu, snemljive Nakladalne rampe Jeklene rampe, dolžine 2.800 mm, širine 750 mm, bočno pomične prevlečene z lesom Hidravlično prek priklopa na pomožni pogon vlačilca z dušilnikom Hidravlični priključek s SVK spojko NW 10/3, brez povezovalnih cevi Navodila za upora

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.950 kg, največja dovoljena obremenitev: 23.050 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 9.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno glede na želje stranke. Šasija prikolice s centralno osjo, gradbena izvedba Varjena konstrukcija iz drobnozrnatega jekla Prednji oporni nogi na menjalniku Hidravlična zadnja podpora Zagozde za kolesa z nosilcem Stranska zaščita iz aluminija brez zaščite proti podvozu Zadnji blatniki čez celotno širino Blatniki pred vsako osjo in antispray-blatniki za vsako osjo Plastična orodjarna, z vmesno polico, š=620/v=360/g=440 mm, zaklepna z obešanko Razširitve izvlečne do 3.000 mm Sredinsko skladišče za lesene deske + lesene deske 70 mm za razširitev na 3.000 mm Privezne točke za nizkonosečo prikolico Vgrajeni obročasti d-vlečni nosilci v zunanjem okviru, vsak 5 t (možnost predelave v cevi za količke) Privezne gobice zgoraj in ob strani v zunanjem okviru, vsak 10 t Vleka centralnoose prikolice Vlečna roka s preizkušeno 50 mm vlečno zanko Osovine in vzmetenje Bobnaste zavore "Lasersko merjene osi/podvozje" - za zmanjšano obrabo pnevmatik in nižjo porabo goriva Zadnja os krmiljena, z avtomatsko blokado pri vzvratni vožnji prek vzvratnega svetila, dodatna blokada na vozilu prek ročnega gumba Zračno vzmetenje 1. os samodejno dvižna os, dodatno ročno spustljiva, upravljanje prek gumba na vozilu Dvig osi pod priporočeno vozno višino, zato ni jamstva za poškodbe pnevmatik Zavorni sistem Dvocevni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Parkirno zavora z vzmetjo 2 nezamenljivi priključni glavi spredaj z povezovalnimi cevmi do vlečnega vozila EBS, Elektronski zavorni sistem z EBS priključkom spredaj, vključno s povezovalnim kablom Opozorilo: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja delovanje ABS! Z dvigalno/spustnim ventilom Višina vozila v kombinaciji z dvižno osjo: ko je os dvignjena, se višina nakladalne oziroma skupne višine poveča za 50 mm Sistem za stabilnost vozila Trailer Infocenter za prikaz podatkov o vozilu, kot so obremenitev osi, prevožena kilometrina in diagnostična/sporočilna sporočila sistema Prepoznavanje obremenitve osi prek EBS-Canbus signala, prikaz na zaslonu v kabini voznika Kolesa in pnevmatike 235/75 R17,5, znamka po izbiri proizvajalca Jeklena platišča, tovarniško srebrna Električni sistem 24 voltov, večkomorni LED žarometi z uporom, stranske rumene LED luči, osvetlitev registrskih tablic v LED 2 bele pozicijske LED luči spredaj Gujdpfx Aiszcv D Noaef 2 bela/rdeča LED luči za ohranjanje pasu zadaj 2 x 7-polni izmenljivo varni vtiči spredaj s povezovalnim kablom Dodatni LED delovni reflektorji na zadku LED rotacijska luč z nosilcem Opozorilne table osvetljene z LED, izvlečne do 3.000 mm Tla potem 70 mm pod iz mehkega lesa, na območju blatnikov jeklena/rebrasta pločevina Zadnja zaokrožitev s 70 mm mehke lesene talne obloge Nizko nakladalna površina z zadnjo zaokrožitvijo 7.500 mm Nakladalne rampe Jeklene rampe dolžine 2.800 mm, širine 750 mm, bočno premične preoblečene z lesom Hidravlično prek stranskega izhoda pogonskega vozila z dušilko, upravljanje stransko na levi spredaj Hidravlično bočno premikanje nakladalnih ramp, možnost individualnega upravljanja Hidravlična povezava s SVK vtičem NW 10/3, vključno s povezovalno cevjo Rešitev za prevoz po meri

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT44001000966, lastna masa: 9.400 kg, največja dovoljena obremenitev: 30.600 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, dolžina tovornega prostora: 7.145 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.120 mm, skupna širina: 27.500 mm, skupna višina: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: rdeča, These images are for reference only! Gross weight perm. / technical: 24,000 / 40,000 kg Payload perm. / technical approx.: 14,600 / 30,600 kg Axle load perm. / technical: 24,000 / 40,000 kg Gusdpfx Aeyxq A Hsiajf Unladen weight (base version) approx.: 9,400 kg +/- build tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low loader platform length in driving lane area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed (loaded) approx.: 900 mm Tow height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium 1 plastic toolbox Extendable widenings to 3,250 mm (not at rear bevel) (tracking width of transported construction machines or vehicles must not exceed outer frame width of 2,750 mm) Central storage compartment for wooden planks 70 mm wooden planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, integrated in the floor longitudinal beams Lashing rings, low loader: 2 pairs of lashing rings on the neck, each 5 t 1 pair of lashing rings in the rear bevel 4 recessed lashing rings, placed centrally in the floor 2 pairs of key slot profiles in the driving lane, for longitudinal guide rails and as additional lashing points 6 pairs of lashing mushroom anchors in the low bed outer frame, each 10 t 5 pairs of stake pockets in the outer frame of the low bed 4 additional pairs of 10 t lashing rings: 1 on the neck 3 recessed in the floor of the low bed Drawbar coupling, turntable trailer: Drawbar with tested 50 mm towing eye Axles + suspension: Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker leveling) Wheels and tires: 235 / 75 R 17.5" Steel rims, twin arrangement, factory silver Brake system: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines for towing vehicle ABS and ALB, with ABS connector at front, with connection cable Attention: The towed trailer may only be pulled by towing vehicles that ensure proper function of the ABS! Floor: Neck area with steel/chequer plate flooring then 70 mm softwood floor, wheel recesses with steel/chequer plate flooring Rear bevel with 70 mm softwood floor Access ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surface Hydraulically operated via tractor PTO Operating instructions: For 10,000 kg axle load, a special permit is required, only indivisible loads permitted!!! Note! Overlength and excess width, special permanent approval required. For applications for special permits for heavy-duty transport, an axle load display is required for air-suspended vehicles! This applies to all deviations from § 34 StVZO (axle load and permissible gross weight exceedance) that require a special permit under § 70 StVZO. The declared gross weight is technically feasible; depending on the load, the gross vehicle weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) These images are for reference only!

Stanje: rabljeno, številka stroja/vozila: WFDFLT22001007597, lastna masa: 6.200 kg, največja dovoljena obremenitev: 11.800 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2018, višina nakladalnega prostora: 200 mm, skupna dolžina: 11.600 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: rdeča, Further Information Chassis: Steel welded construction, double cranked with low bed in front of and behind the axle assembly, low bed beveled for driving on, turntable with robust ball bearing slewing ring, foldable rear support, wheel chocks, side underrun protection, quarter shell mudguards. Lashing points: Over front axle: 2 pairs of ring lashing eyes each rated 5t at the front at the cranked part of the low bed / Rear axle: 6 pairs of lashing eyes laterally in the low bed each rated 8t. 6 pairs of lashing eyes each rated 5t between the longitudinal beams, pair of stake pockets recessed in the outer frame, inside dimension 70 x 40 mm, or alternatively to stake pockets, 5t ring lashing eyes embedded in the floor. Drawbar: Certified 40 mm towing eye Axles: BPW drum brake axles Brake system: 2-line compressed air braking system, spring-actuated parking brake, 2 fail-safe coupling heads at the front Gusdpfx Aji Ri N Ueiaof Electrics: 24 volts, multi-chamber lights, lateral yellow lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, beacon with bracket, pair of illuminated warning panels extendable to 3,000 mm, 2 x 7-pin fail-safe connectors at the front Floor: Front crank with steel / chequer plate covering, stowage box recessed in the transition to the crank, track area and middle section between the beams with steel / chequer plate covering, rear slope with 70 mm softwood floor, low bed area including rear slope 5900 mm Ramps: Hanging rail for aluminum ramps across the entire width, as U-profile across the entire width. Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, stowage compartment for ramps between beams Approval: Contour marking with reflective strips according to ECE R 048, white at sides and red at rear