Faymonville Paluba Plovila Faymonville G-Modul nakup rabljenega (32.496)

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) Gbsdpfsy Auh Isx Ab Ien * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear chamfer approx. 500 mm x 8° * 8 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramp with hydraulically folding and unfolding ramp sections * Hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: * Steel structure made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot blasted after welding with a blast wheel system * Second blasting treatment with corundum for optimum adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * A spare wheel carrier in front of the front wall * Yellow-red air couplings at the galvanized front connection strip Gbedey Augwspfx Ab Ijn * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the chamfered section of the loading platform * Super Grip 2 rubber coati

Stanje: dober (rabljeno), številka stroja/vozila: YAFTL6002R0035345, dolžina tovornega prostora: 14.800 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 9.000 mm, Leto izdelave: 2024, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj - Bobnasti zavorni sistem = Dodatne informacije = Nosilnost: 81.100 kg Skupna dovoljena masa: 81.100 kg Tehnično stanje: dobro Vizualno stanje: dobro Stanje sprednjih pnevmatik: 60 Sprednje pnevmatike: 245/70 R17.5 Zadnje pnevmatike: 245/70 R17.5 Zadnji pregled: 28.12.2025 Za več informacij kontaktirajte Lastas Sales. Gbsdsx Rtiaepfx Ab Ien

Stanje: dober (rabljeno), številka stroja/vozila: YAFTL4000J0022411, konfiguracija osi: 3 osi, medosna razdalja: 8.020 mm, barva: rdeča, Leto izdelave: 2019, = Dodatne možnosti in oprema = - Zadnje zračno vzmetenje - Sprednje zračno vzmetenje - Bobnasti zavorni sistem = Dodatne informacije = Gbodowx Ea Hepfx Ab Ijn Teže Lastna teža: 15.200 kg Nosilnost: 32.800 kg Skupna dovoljena masa: 48.000 kg Stanje Tehnično stanje: dobro Optično stanje: dobro Dodatne informacije Stanje pnevmatik spredaj: 20 Stanje pnevmatik zadaj: 20 Pnevmatike spredaj: 245-70 R 17.5 Pnevmatike zadaj: 245-70 R 17.5 Za več informacij kontaktirajte Lastas Sales.

Stanje: rabljeno, barva: modra, Leto izdelave: 2022, Faymonville Maxtrailer F-S42-2GXX. Baujahr: 2022. 12 t Pendel-X Achsen. Eigengewicht: 12.917 kg. Nutzlast: 34.083 kg. Zulässiges Gesamtgewicht: 47.000 kg. Sattellast: 23.000 kg. Gbedpfey A Edajx Ab Ijn Hydraulisch abfahrbares Schwanenhals. Aluminium Bordwände + Werkzeugkasten am Schwanenhals. Reserverad. Hydraulikanschluss am Lkw (NATO). 5,5 m ausziehbar. 2 x 25 cm verbreiterbar. Funkfernbedienung. Hydropneumatische Federung. Baggerbrücke 2600x700 mm. Verzinkt. Abmessungen: Schwanenhals: L: 3700 mm B: 2450 mm H: 1450 mm Sattelhöhe: 1150 mm Ladefläche: L: 6850 mm B: 2550 mm H: 350 mm Bodenstärke: 200 mm Heck Trailer: L: 2600 mm B: 2550 mm H: 1000 mm Bereifung: 245/70R17,5, Profil 90% Zustand: Wie neu! ID-Nr.: 509 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis finden auf alle Anzeigen, Angebote und Offerten von Heinhuis, auf sämtliche von Heinhuis geschlossenen Verträge sowie auf den ihnen vorausgehenden Verhandlungen Anwendung. Durch jegliche Form der Reaktion erkennen Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen von Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Nettoexportpreise. = Weitere Informationen = Baujahr: 2022 Leergewicht: 12.917 kg Zuladung: 34.083 kg Zulässiges Gesamtgewicht: 47.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2018, Faymonville F-S42-2GXX. Baujahr: 2018. 12 t Pendel-X-Achsen. Max. Gesamtgewicht: 49.000 kg. Sattelzapfenlast: 25.000 kg. Godpoy Ay S Eofx Ab Iebn 5,5 Meter ausziehbar. 2 x 25 cm verbreitert inkl. Verbreiterung. Verzinkt. Hydraulisch abfahrbares Schwanenhals. Alu-Bordwände am Schwanenhals. Hydraulische Federung. Funk-Fernbedienung. Baggerbrücke: 3050 mm x 700 mm. 3 herausnehmbare Bodenplatten. Hydraulik arbeitet vom Auflieger über NATO-Elektrik. Abmessungen: Schwanenhals: L: 3.700 mm B: 2.500 mm H: 1.500 mm Sattelhöhe: 1.250 mm Ladefläche: L: 6.850 mm B: 2.550 mm H: 400 mm Bodenstärke: 230 mm Heck des Aufliegers: L: 3.050 mm B: 2.550 mm H: 950 mm Bereifung: 245/70R17,5 60% ID-Nr.: 494. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Inserate, Angebote und Kostenvoranschläge von Heinhuis, sämtliche von Heinhuis abgeschlossenen Verträge und die den Vertragsabschlüssen vorangegangenen Verhandlungen. Durch jegliche Form der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, von diesen Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2018 Max. Gesamtgewicht: 49.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2016, Faymonville F-S43-1BGS. Baujahr: 2016. 9-Tonnen SAF-Achsen. Leergewicht: 9030 kg. Maximales Gesamtgewicht: 45.000 kg. Gbodpfx Aboy Ay Srj Ien Sattellast: 18.000 kg. 7,5 Meter ausziehbar. Hydraulik arbeitet über NATO-Anschluss vom Lkw. EBS, ABS, ALB. Funkfernbedienung. Servolenkung mit 3 gelenkten Achsen. Luftfederung. Vorbereitung für Twistlocks. Ladeflächenmaße: L: 13.600 mm B: 2.550 mm H: 1.480 mm. Reifen: 385/65R22,5 50% Profil. ID-Nr: 561. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis finden auf alle Inserate, Angebote, Offerten und Absprachen der Firma Heinhuis sowie auf alle mit der Firma Heinhuis abgeschlossenen Vereinbarungen und die ihnen vorausgehenden Verhandlungen Anwendung. Mit jeglicher Form der Antwort erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis an und erklären, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2016 Leergewicht: 9.030 kg Zuladung: 35.970 kg zulässiges Gesamtgewicht: 45.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für mehr Informationen: WhatsApp:

Stanje: rabljeno, barva: modra, Leto izdelave: 2016, Faymonville F-S43-1ABA. Baujahr: 2016. 10 t SAF-Achsen. Leergewicht: 12.600 kg. Zuladung: 29.400 kg. Zulässiges Gesamtgewicht: 42.000 kg. Sattellast: 18.000 kg. Hydraulik kompatibel mit NATO-Anschlüssen. Alubordwände am Schwanenhals. Seilwinde mit Fernbedienung. Hydraulisch absenkbare Brücke vom Boden bis zum Schwanenhals (Länge: 3.000 mm). Luftfederung. Geriffelter Boden. Lenkachse – 3 gelenkte Achsen mit Servolenkung. Zweipunkt-Hydraulikstützen am Heck. Zweifach hydraulische Auffahrrampen: - Länge: 2.850 + 1.750 mm - hydraulisch von links nach rechts verstellbar. Abmessungen: Schwanenhals: L: 3.750 mm B: 2.500 mm H: 1.350 mm Sattelhöhe: 1.150 mm Ladefläche: L: 9.600 mm B: 2.500 mm H: 900 mm Bereifung: 235/75R17,5, Profil ca. 80 % Deutscher Auflieger! ID-Nr.: 437 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote und Kostenvoranschläge der Firma Heinhuis, alle von Heinhuis geschlossenen Verträge sowie die diesen vorausgehenden Verhandlungen. Mit jeglicher Art der Kontaktaufnahme erkennen Sie die Gültigkeit dieser Allgemeinen Geschäftsbedingungen an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Export-Netto-Preise. = Weitere Informationen = Baujahr: 2016 Leergewicht: 12.600 kg Zuladung: 29.400 kg Gjdey Ayyiepfx Ab Ijbn zulässiges Gesamtgewicht: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: zelo dobro (rabljeno), prva registracija: 09/2015, dolžina tovornega prostora: 20.180 mm, širina tovornega prostora: 3.000 mm, barva: drugo, Leto izdelave: 2015, Damage: none YAFTL2007F0017329 = Further Information = Unladen weight: 13,600 kg Payload: 28,400 kg Gross vehicle weight: 42,000 kg Gbodpfoymrb Sex Ab Ion Technical condition: very good Visual condition: very good Price: On request Registration number: DW205AH = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are exclusive of VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber.) MOB: Dutch (Available on WhatsApp and Viber.) When making a payment by bank transfer, the funds must be transferred to our bank account listed below. Always check the payment details stated on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.500 kg, dovoljena osna obremenitev (os 2): 10.500 kg, dovoljena osna obremenitev (os 3): 10.500 kg, prva registracija: 11/2022, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, skupna višina: 2.400 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 17.5, medosna razdalja: 2.300 mm, Leto izdelave: 2022, Oprema: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Rear air suspension - Spare wheel = Notes = - Faymonville / Max Trailer 3-axle low loader (Type: MAX100) - Loading platform dimensions: length 930 cm x width 254 cm - Extendable up to: 1280 cm (+350 cm) - Loading height: 91 cm - Lashing rings - Wheel recess - Widening inserts - Gooseneck dimensions: length 252 cm x width 247 cm x height 40 cm - Loading height: 149 cm - 2 ALTEC aluminium loading ramps (Type: VFR120) - Dimensions: length 235 cm x width 47 cm - Maximum incline: 30% (16.5°) - 10.5-ton axles! - 18-tonne fifth wheel pressure! - 49.5 tonnes gross vehicle weight! (Technical) - LIKE NEW CONDITION! - Always stored indoors! - Only 20,000 km driven! = Further Information = Axle configuration Tyre size: 235/75 17.5 Axle brand: BPW Suspension: air suspension Rear axle 1: twin tyres; max. axle load: 10,500 kg; tyre tread left inner: 70%; tyre tread left outer: 70%; tyre tread right inner: 70%; tyre tread right outer: 70% Rear axle 2: twin tyres; max. axle load: 10,500 kg; tyre tread left outer: 80%; tyre tread right outer: 80% Rear axle 3: twin tyres; max. axle load: 10,500 kg; steered; tyre tread left inner: 70%; tyre tread left outer: 70%; tyre tread right inner: 70%; tyre tread right outer: 70% Weights Unladen weight: 10,069 kg Payload: 35,931 kg gross vehicle weight: 46,000 kg Maintenance, history and condition Number of owners: 1 APK (MOT equivalent): valid until 11.2026 Technical condition: good Gbedjyztt Tspfx Ab Ion Visual condition: good Identification Registration number: OT-87-PP Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Stanje: novo, največja dovoljena obremenitev: 36.245 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available immediately and on short notice, can be found on our website. Gbsdpfsyvnfaox Ab Ion Extract from the specification. Full equipment details available on request. Loading Area: * Loading area with hardwood floor and rear bevel approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for fastening straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air suspension, disc brakes (approx. 377 mm), lift/lower function (ET 120) * Axle tool kit Tyres: * Tyres: 435/50 R 19.5, brand of our choice * TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the tractor unit via standardised EBS interface according to ISO 11992. For proper display, the truck must be capable of transmitting and displaying this data. Braking System: * Wabco braking system according to EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel Construction: * Steel structure made from high-tensile fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX at the front connection bar with sockets 24N, 24S & 15-pin connector as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding with a wheel blasting machine Second abrasive blasting with corundum for optimal coating adhesion * HRM metal plating of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection * Final coating with 2 layers of two-component finish, single-colour in RAL 3002 Carmine Red as per RAL system 841GL * Rear metal-coated and painted in RAL 9010 (Pure White) * Paint structure tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment: * Yellow-red air couplings on the galvanised connection bar at the front * 4 wheel chocks with holder * 2-inch king pin * Loading area with heavy-duty hardwood floor * 1 spare wheel holder under the loading area, right-hand side * Galvanised folding supports under the rear loading area bevel * 9 pairs of stake pockets for insertable stanchions, approx. 100 x 50 mm, in the outer frame of the loading area * One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Anti-slip sand coating painted on the centre beam * 1 INOX toolbox transverse under the loading area, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the loading area, for 1x 20' container, 2x 20' containers, or 1x 40' container * 3 pairs of transverse stake pocket rails mounted in the loading area, for insertable stanchions approx. 100 x 50 mm * Storage for max. 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 2 INOX toolboxes under the loading area left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, transverse under the loading area, behind the axles * One beacon light supplied

Stanje: rabljeno, največja dovoljena obremenitev: 44.420 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 11.500 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment. Complete equipment details on request. Loading platform: * Loading bed with approx. 30 mm thick hardwood floor * 9 pairs of folding lashing rings towards the outside (LC 10,000 daN) * 10 pairs of stake pockets in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm Landing gear / Support legs: * Hydraulic landing gear Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is carried out via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical capacity 10,000 kg each, first axle hydro-mechanically steered, second axle fixed, and third axle hydro-mechanically forced-steered, mounted on turntable * Air suspension with raise/lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin connectors according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Coating: Gbjdpjyu Eu Iofx Ab Ion * Entire steel construction shot-blasted automatically after welding using a turbine blast machine * Second blasting treatment with corundum for optimal adhesion of the coating system * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Jet Black as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Coating tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Included accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * DUOMATIK air couplings at the galvanized connection rail at the front * Storage for approx. 1,000 mm plug-in stakes, rear in the central beam * On the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket * White reflective tape in accordance with EU regulations on the sides and red at the rear * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform * European reflective plates (red-yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * Manual and description on USB stick * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump cover * 4 wheel chocks with holder on the front wall * Steering from the front and rear via cable remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stake pocket bars mounted in the loading plat

Stanje: zelo dobro (rabljeno), prva registracija: 07/2021, dolžina tovornega prostora: 134.500 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 770 mm, skupna dolžina: 13.450 mm, skupna širina: 2.550 mm, skupna višina: 770 mm, Leto izdelave: 2021, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje = Dodatne informacije = Lastna teža: 8.520 kg Nosilnost: 31.000 kg Skupna dovoljena masa: 50.900 kg Višina nakladalne površine: 77 cm Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Cena: po dogovoru Gbodpfjyxrdxsx Ab Ijn

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer Gbsdpfx Abjxarmae Isn * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: rabljeno, barva: črn, Leto izdelave: 2019, Faymonville F-S43-1AAF. Leto proizvodnje: 2019. SAF osovine, 9 tona. Maksimalna dozvoljena masa: 45.000 kg. Opterećenje na tovarnički čep: 18.000 kg. Produživa do 7,4 metra. Sistem upravljanja snagom - 3 upravljačke osovine. Vazdušno oslanjanje. Hidraulika radi na NATO električni sistem. ABS, EBS, ALB. Dimenzije poda: Dužina: 13.550 mm. Širina: 2.500 mm. Visina: 1.450 mm. Visina aluminijumskih stranica: 600 mm. Visina tovarničkog čepa: 1.250 mm. Gume: 385/65R22,5, preostalo 70% profila. ID broj: 489. Opšti uslovi poslovanja kompanije Heinhuis primenjuju se na sve oglase, ponude i kalkulacije Heinhuis-a, sve ugovore koje Heinhuis zaključuje i pregovore koji ih prethode. Odgovorom na bilo koji način prihvatate primenu opštih uslova poslovanja kompanije Heinhuis i potvrđujete da ste upoznati sa istim. Naše cene su neto izvozničke cene. = Dodatne informacije = Godina proizvodnje: 2019 Najveća dozvoljena masa: 44.999 kg Cena: Na upit = Informacije o firmi = Gsdpeyub S Ajfx Ab Iobn Za više informacija: WhatsApp:

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Gjdpfxoma Hf Rj Ab Iobn Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear • Mounts for warning panels including socket left and right at the gooseneck and rear panel • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Below is an excerpt from the equipment list. Full specification available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each Gbsdpfjyhkqnox Ab Ion * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit * 4 pairs of hanging la

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° Godpfxergzv Nj Ab Iebn * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall Gedpfxjv Sw E Ao Ab Ijbn * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Gjdpfx Astx Nwneb Ijbn Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 91.640 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook connection front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 430 mm, beam width: approx. 1,350 mm * Load height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical pin-lug coupling for attaching a lowbed at the front, end traverse at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) Gsdpjuvbdtofx Ab Iebn * Hydraulic axle compensation * Tyres front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) guaranteeing optimal corrosion protection * Final coating with 2 coats of 2K paint, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU sideboards and tailboard, approx. 400 mm high, anodized, for installation on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication for a 3-axle chassis * One 7-pin socket left and right at the rear of the front bogie for warning plates * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * The steel mats can be inserted in 2 positions to create a lowered loading area. Please refer to the respective load diagram for the load capacity, depending on extension width * Steel mats with rubber covering approx. 12 mm thick * One 7-pin socket left and right, front and rear on the rear bogie for warning plates * BEKA-MAX central lubrication for a 5-axle chassis * Rear bogie with socket for cable remote control for steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) Gjdpfsxttc Ajx Ab Iebn * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg Gbedpfewvzg Rox Ab Ijn * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 07/2016, vzmetenje: zrak, Leto izdelave: 2016, Oprema: dvižna zadnja plošča, Vzmetenje: zračno vzmetenje Gbodpfjvvwzrjx Ab Ien Zadnja os 1: krmiljena Zadnja os 2: krmiljena Zadnja os 3: krmiljena Največja dovoljena masa: 48.000 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Cena: na zahtevo Za več informacij se obrnite na Davida F Middelmana.

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: YAFTL40900001004, največja dovoljena obremenitev: 80.000 kg, skupna masa: 105.000 kg, velikost pnevmatike: 70%, medosna razdalja: 1.360 mm, barva: rdeča, Leto izdelave: 2009, Oprema: ABS, Country of manufacture: Netherlands Gedpfx Abovtygfs Iobn Body options: Disc brakes, Central lubrication system, Moving floor, Forced steering, Full side opening Further information: Low-bed pipe carrier semi-trailer, extendable, hydraulic suspension, side width adjustable up to 3,500 mm interior and 4,200 mm exterior, latest generation pendular axles Option to add a 2-axle dolly to create a pipe carrier combination 2+4. Load capacity 85 tons We have 2 identical units available in excellent condition.