Berger Kraus Kolesni Nakladalnik, Vključno Z Nizkim Nakladalnikom + Dodatna Oprema nakup rabljenega (34.902)

Stanje: novo, lastna masa: 8.950 kg, največja dovoljena obremenitev: 40.050 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.950 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck of frame 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outside as perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Prepared for extendable width extensions in the loading area - With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2 pieces, single-part aluminium loading ramps with spring lift system - Dimensions (L x W) approx. 2,500 mm x 600 mm - Can be locked in transport position with tie-down straps - Laterally adjustable by hand Floor: - 35 mm larch wood floor with aluminium omega-profiles Landing Gear: - Mechanical 24 t landing gears with single-sided operation and load compensation Axles, Steering, and Tyres: - BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift/lowering device with total travel approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer - 3rd axle is friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot-blasting, chassis spray galvanising and priming - Chassis / wheel hub / outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Reflective strips on sides and rear in yellow Accessories: - Removable side and rear walls approx. 400 mm high on gooseneck - Spare wheel bracket - Aluminium bump guard - 4 wheel chocks - Sheet metal mudguards with Clear-Pass Lsdpfx Apswu Agio Dohh - Long licence plate holder in end plate - 1 removable ECE board at rear - 11 pairs ZK modules 10 t at sides: - 2x on gooseneck - 9x on loading area - Without tow rings at rear - Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm - 4 mounting holders for warning boards plug-in type in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes - 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container - Rubber apron fitted on underrun protection

Stanje: novo, lastna masa: 29.600 kg, največja dovoljena obremenitev: 72.400 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.650 mm, širina tovornega prostora: 2.840 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 29.600 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front bogie: - Hook mountings at front and rear - Bogie length x width approx. 2,200 mm x 2,850 mm Excavator deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and pin-lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-axle rear bogie: Lsdewcmhaepfx Ap Dehh - Mechanical pin-lug coupling for the installation of a lowbed at the front, rear crossmember at the back - Bogie length x width approx. 5,480 mm x 2,850 mm - Multiple lashing points Pendulum axles and tyres (front and rear bogies): - "PENDULUM AXLE", all axles forced-steered via hydromechanics - Hose rupture valve on axle compensation cylinders with automatic RESET function - Hydraulic cylinders with shut-off valves and locking clips for securing in raised position - Final coating on axles: 2 layers of single-colour MB 7350 Novagrau 2K paint - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres size 285/70 R19.5 Remote steering (after-steering): - Remote steering operable from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Socket for remote steering control on gooseneck - Cable remote control with pushbuttons and single-track control included Accessories included: - Yellow and red air couplings on the galvanised front connection bar - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at rear of gooseneck for warning boards - Hoisting jib with winch for spare wheel at the front face of the gooseneck - Truck hydraulic connection with flow control (40 l/min), including support jib for supply lines; tractor unit tank must have at least 80 litres capacity with couplings - Plug-in ALU side and rear boards on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by foldable cover - Separate air connection with air gun on gooseneck - BEKAMAX central lubrication system: 1x on gooseneck, 1x on 2-axle and 1x on 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connectors on gooseneck and at lowbed hook interface - 2 spare wheels - One 7-pin socket left and right, at front and rear of rear bogie for warning boards - Front bogie with separate air connection for impact wrench - Foldable steel bed extensions, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel bed inserts can be placed in 2 positions for sunken load area - Steel mats with rubber flooring, approx. 12 mm thick - Thread-in options (⌀ 40 mm) every approx. 500 mm on the upper flange of the excavator deck outer tube for eye bolts - One locking point at every approx. 500 mm on extension with mechanical lock - Socket on rear bogie for remote steering cable control - 2 reversing lights on rear panel - Four extendable warning boards (by approx. 2,000 mm), each approx. 423 x 423 mm with position lights - 1 work light left + right on rear panel of gooseneck with separate on/off switches - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for after-steering

Stanje: novo, lastna masa: 10.300 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with chequer plate covering Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp parts, hydraulic lifting system, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension and Tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tires 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system in accordance with ECE R 141 Lhsdsu Hp Hrspfx Ap Doh Accessories Included: - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the galvanized connection strip in front - 4 wheel chocks - Galvanized folding supports under the platform's rear chamfer - A holder for a rotating beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape as per EU regulations along the sides of the trailer and red at the rear - Electro-hydraulic unit at the rear, under the platform - At the gooseneck and at the ramps left and right, each with a holder for warning signs, including socket - Control valves for the ramps positioned on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - Removable ALU side walls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear, galvanized side stakes are removable (body length approx. 2,560 mm) - An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm steel cable, 24 m long, with guide roller - Bolted 5 t ring for cable deflection of the winch on the gooseneck without pulley - 2 pairs WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the platform - Lift axle on the front axle with control via TEBS E, depending on actual axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the central beam at the rear chamfer (LC 10,000 daN) - Sand coating for slip resistance painted on the chequer plates on the gooseneck and on the platform - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection - Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm - Speed stickers 80 km/h rear and on both sides - Load manometer for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-coated with ZINACOR 850 (zinc 85% - alu 15%)

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Lodpjuadk Nsfx Ap Dohh Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Lhedstphtmepfx Ap Djh Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: novo, lastna masa: 15.450 kg, največja dovoljena obremenitev: 65.550 kg, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 21.900 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 925 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimized platform length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractors: 4x2, 6x2, and 6x4 Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear taper of approx. 500 mm x 10°. A support table approx. 300 mm wide is welded to the central beam, featuring elongated slots at the front and rear for optional bridge elements that can be hooked in and repositioned Pneumatic locking with conical locking pin and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles and Tyres: BPW axles and suspension, first axle self-steering, all other axles hydraulically and mechanically forced-steered Lhjdporigw Rsfx Ap Djh First axle equipped with an electro-magnetic reverse lockout, activated via reverse gear and manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve Manufacturer by our choice Sockets and Lighting: 24-volt lighting system in accordance with EU regulations ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallizing Full steel construction, shot-blasted, then hot-finished with ZINACOR 850 Paintwork: 6-stage finishing process: Complete steel construction shot-blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer. Final paintwork in 2 coats of 2K paint in single-tone DB 7350 Novagrau, followed by cavity sealing with special wax Accessories: Detachable front wall made of steel, approx. 400 mm high Connection strip for supply lines to the tractor unit, fitted at the height of the outer frame profile ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. If your pin configuration deviates from the ISO connector standard, please inform us 3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches) 1 pair of plug-in ALU sidewalls on the gooseneck, approx. 400 mm high, anodized finish 3.5'' king pin. Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 2 wheel chocks with holder in front of the front wall Mechanical landing legs with 2-speed gearbox and crank Control valves for hydraulic ramps located on the right side of the vehicle 1 pair of mechanical rear supports Central lubrication system with 1 pump, BEKAMAX brand, using standard grease according to NLGI-2 Removable guard covering the pump(s) of the central lubrication system Remote steering from front and rear, controlled by cable remote with push buttons, with axle tracking control, no installation required on tractor unit Under the gooseneck and on the rear crossmember, one 7-pin socket with holder for warning signs each on left and right. One 7-pin socket on the rear crossmember Manual and documentation One-piece INOX stowage box, approx. 2,480 x 340 x 390 mm, straight design Please note that any special equipment and accessories will increase the unladen weight and correspondingly reduce the payload Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stanje: novo, lastna masa: 34.500 kg, največja dovoljena obremenitev: 106.700 kg, skupna masa: 141.200 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.150 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 580 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 34.500 kg, Oprema: ABS, Gooseneck: Ledpowhywfsfx Ap Dehh - Gooseneck hydraulically lift/lowerable as well as detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie: - Hook mounts at front and rear - Chassis length x chassis width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and bolted lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x beam width approx. 430 mm x 1,350 mm - Loading height 580 mm with 150 mm ground clearance - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of threaded blocks M30 on inner beam for mounting screw-on rings 5-Axle Rear Bogie: - Mechanical bolt-on lug coupling for fitting a lowbed front, rear end traverse - Chassis length x chassis width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear bogie): - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-plugs for securing in lifted position - Final paint of axles with 2 coats of 2K paint, single-colour in MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres 285/70 R19.5 Steering Override: - Remote steering from the front and rear via cable remote control with push buttons, including axle tracking control - Socket for steering control operation on the gooseneck - Cable remote control with push buttons including axle tracking control Included accessories: - Yellow-red air couplings on galvanised front connection rail - Steel headboard approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" kingpin - Gantry with winch for spare wheel at the front side of the gooseneck - Truck hydraulic connection with flow control valve (40 l/min), including gantry for suspension of supply lines, tractor unit tank must be at least 80 litres with couplings - White reflective tape according to EU regulations on sides and extension, red at rear - Plug-in ALU side panels and rear wall on gooseneck, approx. 400 mm high, anodised - Operating lever on gooseneck protected by folding cover - Separate air connection with air pistol on gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2: 1x on the gooseneck, 1x on 3-axle bogie, 1x on 5-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections in the lowbed hook area - Front bogie with separate air connection for air screwdriver - Threaded inserts (ø 40 mm) every approx. 500 mm on outside of upper flange of excavator deck for screw rings - Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel mats with rubber covering approx. 12 mm thick - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering override in addition to cable remote - Painted sand layer as anti-slip measure - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer Lhsdpfx Aowu A Sljp Doh - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Ljdpfx Apot Ag Uwj Dohh Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: Lhjdpfx Asuqlmnop Doh - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: Lhodeunrapepfx Ap Doh - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable Lhodsvy Edcepfx Ap Djh - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: rabljeno, Dobro stanje. Nakladalna dolžina 8000 mm, višina nakladanja 500 mm. Elektrohidravlična rampa (NATO priključek). Ljdpfx Apjy Hdr Dj Djhh

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: YA9TL510050113953, lastna masa: 27.720 kg, največja dovoljena obremenitev: 70.000 kg, skupna masa: 100.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2005, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 14.200 mm, širina tovornega prostora: 3.250 mm, skupna dolžina: 23.950 mm, skupna širina: 3.250 mm, skupna višina: 1.050 mm, vzmetenje: hidravlika, barva: modra, Leto izdelave: 2005, število osi: 7, Naprodaj je nizkopodni priklopnik Faymonville. Lhsdpox Afbvefx Ap Doh Število osi 2+5 = 7 Vedno vzdrževan v lastni delavnici in je v VRHUNSKEM stanju. Priklopnik je bil uporabljen izključno za prevoze v EU – baltske države, Nemčijo in okolico. Približno 1-2 krat na tri mesece. Nizkopodni priklopnik se nahaja v Latviji, 3405 Liepaja! Podrobnosti po slikah!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W09T242247GR27178, lastna masa: 6.260 kg, največja dovoljena obremenitev: 17.740 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2025, dolžina tovornega prostora: 4.450 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 13.950 mm, skupna širina: 300 mm, skupna višina: 1.220 mm, vzmetenje: zrak, velikost pnevmatike: 285/70R19,5 --/147J, medosna razdalja: 6.844 mm, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2007, Oprema: ABS, V ponudbi je 24-tonski polpriklopnik z nizkim podom iz podjetja Gebr. Recker, letnik 2007. Primeren za prevoz gradbenih, kmetijskih in gozdarskih strojev. Pred približno 60.000 km je bil generalno obnovljen: - nova električna napeljava - nova hidravlika (cevi in vodniki) - nov zračni sistem (vključno z ABS in EBS) - zadnji vozni del (zadnja os) Ljdpfjxx U H Hsx Ap Djhh - na novo peskano, cinkano s pršenjem in lakirano Nizki pod se lahko podaljša do 2,5 m v dolžino (dolžina v zaprtem stanju: 4,45 m; povsem izvlečen: 6,95 m) V širino ga je mogoče razširiti do 3 m (zložen: 2,55 m; raztegnjen: 3,00 m) Nakladalna višina na ploščadi nizkega poda je 40 cm, v poglobitvah 20 cm.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, HS 105020 BS 10145 / SMB with Grating Surface on Ramps ++ Delivery possible, freight costs on request ++ Technical Data: Loading height: 705 mm Ramp angle: 16° Tyres: 235/75R17.5 Equipment: ABS CHASSIS FRAME INCLUDING SIDE WALLS AND DRAWBAR FULLY HOT-DIP GALVANIZED HEAVY-DUTY SMB AXLES WITH SOLID PARABOLIC SUSPENSION Lhsdpewkt Hlsfx Ap Dsh AXLE UNIT WITH LOAD EQUALIZATION 4 RECESSED AND FORGED LASHING POINTS IN THE CORNERS 12 LASHING EYES INTEGRATED INTO THE OUTER FRAME CONTINUOUSLY HEIGHT-ADJUSTABLE COUPLING DEVICE ACCESS RAMPS WITH ROBUST, HOT-DIP GALVANIZED STEEL GRATING SURFACE FOR SUPERIOR GRIP TAILLIGHTS PROTECTED AND INTEGRATED INTO THE UNDERRUN PROTECTION EXTRA-HIGH CORNER POSTS FOR SECURE SUPPORT OF THE ACCESS RAMPS ROBUST, HOT-DIP GALVANIZED STEEL MUDGUARDS 2 FOLDABLE AND TELESCOPIC SUPPORT LEGS AT THE REAR ALUMINIUM SIDE IMPACT PROTECTION FROM START OF LOADING AREA TO 1ST AXLE HEAVY-DUTY GEAR SUPPORT WINCH WITH LOAD AND QUICK MODE LOW LOADING HEIGHT 235/75 R17.5 INCH TYRES …and much more Loose accessories available as options. - - all information without guarantee - - Images may differ - -

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 10,2 kW (13,87 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.295 kg, dvižna višina: 2.980 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, We offer you reliable and robustly engineered mini excavators featuring many extras and stylish design. Offer includes: Mini excavator, single-axle low-bed trailer, and a small accessory package! Our machines are sold as demonstration units, meaning they may have up to 5 operating hours due to loading and unloading for transport and brief trial runs. For every excavator you purchase from us, you receive a CE certificate, an invoice with itemized VAT, and an operator’s/repair manual in German. Additionally, we offer financing options for commercial customers, spare parts procurement, and excellent service! Technical Data – Mini Excavator: - Model: BK1350JSR JOYSTICK with swing boom and adjustable undercarriage - Brand: Berger Kraus - Operating weight: 1295 kg - Bucket capacity (pre-installed): 0.026 m³ - Bucket width (pre-installed): 380 mm - Engine: KUBOTA EURO 5 (D722) 3-cylinder liquid cooled (diesel) - Rated power: 10.2 kW (14 HP) @ 2500 rpm - Displacement: 719 cm³ - Main pump: TAIFENG piston pump - Oil flow: 45 L/min - Slew motor: EATON (USA) - Travel motor: JINGKEN hydraulic motor - 2 travel speeds: 2 / 3.6 km/h - Hydraulic oil tank: 15.3 L Lhedpfxoyzi H Ns Ap Djh - Fuel tank: 11 L Working Ranges: - Digging reach at ground: approx. 3380 mm - Max. digging reach: approx. 3410 mm - Max. digging depth: approx. 2002 mm - Max. dumping height: approx. 2980 mm - Max. discharge height: approx. 2170 mm - Minimum swing radius: approx. 1490 mm - Max. dozer blade lift height: approx. 140 mm - Max. dozer blade digging depth: approx. 200 mm - Slew radius: 360° Dimensions: - Overall track length: approx. 1435 mm - Undercarriage width: approx. 850-1000 mm (adjustable) - Track width: approx. 180 mm - Track height: 320 mm - Overall dimensions (LxWxH): 3100x850(1000)x2320 mm Technical Data – Trailer: - Loading area dimensions (LxW): 2600x1503 mm - Permissible gross weight: 1800 kg - Unladen weight: approx. 478 kg - Payload: approx. 1322 kg - Coupling device by Knott - Axles including braking system by Knott - LED marker lights - LED outline lights - Galvanized loading ramp with support bracket - Plywood floor with lashing rings - Axle load: 1800 kg - Tongue load: 100 kg - Tires: 195/50R13C 104N - Wheel chocks - Folding jockey wheel - Bucket support Accessory Package: - Quick coupler (pre-installed) - Hydraulic thumb (pre-installed) - 800 mm bucket - 200 mm bucket - 380 mm bucket - Ripper tooth - Rake - Earth auger, 20 cm diameter - Toolbox In addition to the accessory packages, we offer a further selection of attachments, all available on our website. Please feel free to contact us by phone or email for a tailor-made offer. As a licensed Berger Kraus and Martz partner, we are your point of contact for spare parts, additional attachments, or any questions and requests regarding your new machine. All information provided without obligation. Errors and changes excepted.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 10,2 kW (13,87 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.295 kg, dvižna višina: 2.980 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, We offer you reliable and robustly designed mini excavators with many extras and a stylish design. Included in this offer: Mini excavator, 2-axle low-loader/trailer, and a large accessories package! Our machines are sold as demonstration vehicles, as they may have up to a maximum of 5 operating hours due to loading and unloading for transport to our location and minor test drives. With every excavator you purchase from us, you will receive a CE certificate, an invoice with shown VAT, and an operation/repair manual in German. Additionally, we naturally offer financing for commercial customers, spare parts procurement, and excellent service! Technical Data – Excavator: - Model: BK1350JSR JOYSTICK with swing boom and adjustable undercarriage - Brand: Berger Kraus - Operating weight: 1295 kg - Bucket capacity (pre-installed bucket): 0.026 cbm - Bucket width (pre-installed bucket): 380 mm - Engine: KUBOTA EURO 5 (D722), 3-cylinder, liquid cooled (Diesel) - Rated power: 10.2 kW (14 HP) / 2500 rpm - Displacement: 719 cm³ - Main pump: TAIFENG piston pump - Oil flow: 45 L/min - Slew motor: EATON (USA) - Travel motor: JINGKEN hydraulic motor - 2 travel speeds: 2 / 3.6 km/h - Hydraulic oil tank: 15.3 L - Fuel tank: 11 L Working Ranges: - Digging reach at ground level: approx. 3380 mm - Max. digging reach: approx. 3410 mm - Max. digging depth: approx. 2002 mm - Max. dumping height: approx. 2980 mm - Max. discharge height: approx. 2170 mm - Minimum turning radius: approx. 1490 mm - Max. dozer blade lift height: approx. 140 mm - Max. dozer blade digging depth: approx. 200 mm - Slew radius: 360° Dimensions: - Total track length: approx. 1435 mm - Undercarriage width: approx. 850–1000 mm, adjustable undercarriage - Track width: approx. 180 mm - Track height: 320 mm Lhedpfx Asyzi H Asp Dsh - Overall dimensions (LxWxH): 3100 x 850(1000) x 2320 mm Technical Data – Trailer: - Loading area dimensions: 2600 x 1530 mm - Permissible total weight: 2700 kg - Unladen weight: approx. 534 kg - Payload: approx. 2166 kg - Hitch by KNOTT - Axles with braking system by KNOTT - LED marker lights - LED outline lights - Tail lights - Fire-galvanized loading ramp with support bracket - Bucket rest - Screen-printed floor including lashing points for securing - Axle loads per axle 1/2: 1350/1350 kg - Automatic jockey wheel - Support load: 120 kg - V-Deisel Accessories Package: - Quick coupler (pre-installed) - Mechanical thumb (pre-installed) - Hydraulic grading bucket, width 800 mm - Hydraulic breaker - Bucket 200 mm - Bucket 380 mm - Ripper tooth - Rake - Earth auger, diameter 20 cm - Toolbox In addition to the accessory packages, we offer a further selection of attachments, all of which can be found on our website. Please feel free to contact us by phone or email, and we will create a tailor-made offer for you. As a licensed Berger Kraus and Martz partner, we are your point of contact should you require spare parts or further accessories, or if you have any questions or suggestions regarding your new machine. All information without guarantee, errors and changes excepted.

Stanje: novo, lastna masa: 30.000 kg, največja dovoljena obremenitev: 9.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 r 17,5, Oprema: ABS, NEW, BPW drum brakes, 1st axle liftable, 3rd axle steering, gooseneck platform with 40 mm hardwood flooring, multiple lashing rings, lateral extensions with special load signs, toolbox, double hydraulic ramps, hydraulically extendable and retractable, side boards on the neck, electric winch with 5,600 kg capacity. Ledpeg Dnc Aefx Ap Djhh

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 146 kg, največja dovoljena obremenitev: 604 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.640 mm, širina tovornega prostora: 1.260 mm, višina nakladalnega prostora: 300 mm, Leto izdelave: 2026, Scope of delivery: 1x Martz car trailer 264x126cm with tipping drawbar and jockey wheel, 750kg Description: The trailer features a V-type tipping drawbar that ensures excellent stability during transit. The chassis comprises bent profiles made of galvanized steel sheet, securely bolted together. The running gear is based on a torsion axle from a renowned manufacturer, providing independent, sprung suspension on a torsion bar. Fitted tires: 155/70 R13. The side panels are constructed from galvanized steel sheet. The rear tailgate can be opened easily and quickly. Load platform: High-quality, waterproof, anti-slip phenolic plywood, 9mm thick. Technical Specifications: - Tipping drawbar - Jockey wheel Gross weight: 750kg Unladen weight: 146kg Payload: 604kg Load bed length: 2640mm Load bed width: 1260mm Overall width: 1690mm Overall length: 3540mm Overall height: 800mm Side panel height: 300mm Side panel material: Galvanized steel Manufacturer: Martz Trailer type: Box trailer Suspension type: Rubber sprung axle Drawbar type: V-drawbar Floor: Phenolic plywood floor (9mm thick) Wheels: 155/70 R13 Frame type: Bolted Frame material: Steel Application: Gardening, DIY, moving/transporting furniture, goods transport, and more. Ledpjxpinasfx Ap Dshh The Martz car trailer is the reliable choice for all your transport needs. We are happy to send you the vehicle documents in advance and free of charge if you choose 'collection in person'!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 146 kg, največja dovoljena obremenitev: 604 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.640 mm, širina tovornega prostora: 1.260 mm, višina nakladalnega prostora: 300 mm, Leto izdelave: 2026, Scope of delivery: 1x Martz car trailer 264x126cm with tipping drawbar and jockey wheel, 750kg Description: Lhsdpfexpimpex Ap Djh The trailer features a V-type tipping drawbar that ensures excellent stability during transit. The chassis comprises bent profiles made of galvanized steel sheet, securely bolted together. The running gear is based on a torsion axle from a renowned manufacturer, providing independent, sprung suspension on a torsion bar. Fitted tires: 155/70 R13. The side panels are constructed from galvanized steel sheet. The rear tailgate can be opened easily and quickly. Load platform: High-quality, waterproof, anti-slip phenolic plywood, 9mm thick. Technical Specifications: - Tipping drawbar - Jockey wheel Gross weight: 750kg Unladen weight: 146kg Payload: 604kg Load bed length: 2640mm Load bed width: 1260mm Overall width: 1690mm Overall length: 3540mm Overall height: 800mm Side panel height: 300mm Side panel material: Galvanized steel Manufacturer: Martz Trailer type: Box trailer Suspension type: Rubber sprung axle Drawbar type: V-drawbar Floor: Phenolic plywood floor (9mm thick) Wheels: 155/70 R13 Frame type: Bolted Frame material: Steel Application: Gardening, DIY, moving/transporting furniture, goods transport, and more. The Martz car trailer is the reliable choice for all your transport needs. We are happy to send you the vehicle documents in advance and free of charge if you choose 'collection in person'!

Stanje: novo, številka stroja/vozila: 1, lastna masa: 7.500 kg, največja dovoljena obremenitev: 22.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 10.070 mm, širina tovornega prostora: 252 mm, višina nakladalnega prostora: 85 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17,5, barva: rumena, Leto izdelave: 2022, Oprema: ABS, dvižna zadnja plošča, Ceylan 2-axle low loader, 10.70m, new, 1st axle liftable and 2nd steering, EBS, air suspension, 8-ton lateral RUD hooks each, stake pockets and lashing slots on the platform for belt securing, double electro-hydraulic ramps, total 4.0m, with electro-hydraulic operation, deck height from ground 85cm, platform length 7.0m. WARRANTY and READY FOR DELIVERY WHILE STOCK LASTS. INTERDRIVE SRL-PARMA DEALERSHIP. Ljdpfoh Utdlox Ap Dshh

Stanje: novo, številka stroja/vozila: 1, lastna masa: 11.000 kg, največja dovoljena obremenitev: 28.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: temno rdeča, Leto izdelave: 2020, Oprema: ABS, New Ceylan low-loader trailer, ready for registration. 3 axles, with first axle liftable and third axle steering. Equipped with EBS, full-width double hydraulic ramps, widening devices, winch preparation, loading deck height 87 cm, loading area length 9.95 m, total length 13.65 m. RUD lashing points. Immediate delivery subject to prior sale. Warranty included. Dealer: INTERDRIVE SRL - PARMA. Lhsdpfx Aeh S Aw Rop Dsh

Stanje: rabljeno, lastna masa: 9.800 kg, največja dovoljena obremenitev: 37.700 kg, skupna masa: 47.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/1999, dolžina tovornega prostora: 12.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 500 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: prometno oranžna, Leto izdelave: 1999, Oprema: ABS, Nooteboom low-bed semi-trailer, cradle type, 2 axles with air suspension, EBS, 2 Tridec steering axles from fifth wheel, adjustable via linkage system, lower deck measuring 6.0 m in length x 50 cm ground clearance, adjustable and detachable gooseneck, payload capacity up to 47.5 tons, year 1999. DEALER: INTERDRIVE SRL – PARMA. Ljdpfx Aepdqvljp Dshh

Stanje: rabljeno, številka stroja/vozila: 1, lastna masa: 5.900 kg, največja dovoljena obremenitev: 19.300 kg, skupna masa: 25.200 kg, konfiguracija osi: 3 osi, prva registracija: 12/1982, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, vzmetenje: jeklo, velikost pnevmatike: 8.25 r 15, barva: rdeča, Leto izdelave: 1982, Oprema: dvižna zadnja plošča, osrednja vrtljiva plošča, spojka prikolice, CTC low-loader trailer with individually adjustable rear ramps operated manually with spring assistance, mechanical suspension, 8 m long load platform, 1.50 m drawbar length, 86 cm ground clearance, front steering axle, year 1982. POSSIBILITY OF COMPLETE SET-UP AND HITCH FOR CONSTRUCTION VEHICLE. DEALER: INTERDRIVE SRL - PARMA. Lhedeilth Ujpfx Ap Djh