Wielton Kiper Tovornjak nakup rabljenega (11.690)

Stanje: novo, Attention!! Contrary to the pictures on the internet, this trailer has a wooden floor in the center instead of a steel floor! Stock vehicle at an absolute special price. Has not yet been first registered. Rear tipper with sliding loading ramps, crank supports, and excavator bucket tray. The ideal combination of tipper and machine transporter: the 3015 MT machine tipper from Variant. Made in Denmark. Manufacturer: Variant Model: 3015 MT Internal dimensions: 3000 x 1500 x 1100 mm (LxWxH) Gross vehicle weight: 3000 kg Payload: approx. 2147 kg (payload may vary depending on equipment and configuration) Unladen weight: approx. 853 kg Side wall height: 300 mm Sliding aluminum loading ramps Sturdy crank supports Excavator bucket tray Electric hydraulic pump with built-in battery, integrated charger, and cable remote control Robust leaf springs Bjdsy H Rwtjpfx Al Hsdb Extremely low loading height (460 mm) ensures safe loading of all types of machinery Automatic jockey wheel 6 heavy-duty lashing rings 13-pin plug Removable rear swing tailgate Walkable mudguards made from aluminum tread plate Marker lights Well-protected light unit Tipping angle: 50 degrees Including vehicle documents Available options and accessories for this trailer: Spare wheel including bracket 800 mm mesh extension sides Anti-theft device Registration of your new trailer with the vehicle registration office

Stanje: novo, Special offer! Stock vehicle from 2022! No initial registration! 9930102 Robust Brian James Trailers rear tipper with swing tailgate Manufacturer: Brian James Trailers Model: Cargo Tipper 2 - Twin Axle Bodey H Rv Aspfx Al Hjdb Internal dimensions: 2700 x 1600 x 300 mm (LxWxH) Gross vehicle weight: 2700 kg Unladen weight: approx. 785 kg Payload: approx. 1915 kg (Payload figures may vary depending on equipment and configuration) Heavy-duty steel side panels Side panels and corner/middle posts removable without tools Sturdy, rattle-free tension locks on the side panels Electronic hydraulic pump with wired remote control for easy and quick tipping at the push of a button Battery charging interface for C-TEK charger Battery charge level indicator Battery master switch Battery charging cable Rear tailgate usable as standard tailgate or swing tailgate Numerous lashing points integrated into the load platform, covered below with spring flaps Lockable coupling head Integrated ramp storage for easy retrofitting of loading ramps Spare wheel mounted at the rear of the trailer Toolbox mounted on drawbar Safety support under the platform for maintenance work Heavy-duty jockey wheel Sturdy net hooks under the load platform LED lighting Incl. vehicle documents Brian James item number: 526-2716-27-2-12 Further available options and accessories for this trailer: - Perforated steel loading ramps, storable underneath, 1.80m and 2.35m - Perforated steel mesh side extension - Support stands - Electric winch - Load securing net - C-TEK charger - Shock absorbers incl. 100 km/h approval

Stanje: rabljeno, Young used trailers from our extensive rental fleet! L9927980 Saris Rear Tipper with Electric Pump Black Edition Manufacturer: Saris Type: K1 276 150 1500 1 Black Edition Bsdpfxoy H Rvcs Al Hodb Internal dimensions: 2760 x 1500 x 350 mm (L x W x H) Permissible total weight: 1500 kg Unladen weight: 505 kg Payload: 995 kg (Payload may vary depending on configuration and design) Electric pump and manual pump Black aluminium drop sides Low loading height: 730 mm Fully welded and galvanized steel chassis, extremely robust and torsion-resistant Removable drop sides and corner posts Automatic jockey wheel 6 flush-mounted lashing eyes in the side V-profile Net hooks on the flap hinges for securing load restraint nets 6 heavy-duty lashing hooks under the loading platform Dimensionally stable combination floor – phenolic resin board reinforced with galvanized steel base for high point load capacity and impact resistance Heavy-duty tension locks on the drop sides Front and rear marker lights Battery and entire electronics protected in a splash-proof box Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Anti-theft device Load securing net Ladder rack on the front panel for transporting longer materials Mesh extension for sides Registration of your new trailer at the vehicle licensing office

Stanje: novo, Mulde 450 mm zu Hakengerät Konos Tridem Innenmaße: 2970 X 1780 X 450 mm L.B.H. Eigengewicht: 407 kg Inhalt: ca. 2,40 m³ Komplett aus verzinktem Stahl Flügeltüren hinten mit Containerverriegelung Mögliche weitere Optionen und Zubehör für diese Mulde: Bjdpsy H N Dxefx Al Hsdb Netzhaken Containernetz Verzurrösen Gerne zeigen wir Ihnen, wie Sie Ihren neuen Anhänger in bequemen monatlichen Raten finanzieren können und erstellen Ihnen ein individuelles Finanzierungsangebot. Wir haben mehr als 2.000 Anhänger ständig am Lager. Eine Vielzahl unserer Anhänger finden Sie online unter Oder Sie besuchen uns in Horn-Bad Meinberg – wir freuen uns auf Sie! Abbildungen können nicht im Serien-Lieferumfang enthaltenes Zubehör darstellen. Durch ständige Weiterentwicklungen können Abbildungen und technische Daten geringfügig abweichen. Irrtümer und Änderungen vorbehalten!

Stanje: novo, Special offer! In-stock vehicle from 2023! No initial registration! 9930580 Humbaur three-way tipper with electric pump and black steel side panels Manufacturer: Humbaur Model: HTK 3500.37 with electric pump Internal dimensions: 3630 x 1855 x 350 mm (L x W x H) Bdjdpfx Asy H Nx Njl Hsb Gross vehicle weight rating: 3500 kg Unladen weight: approx. 950 kg Payload: approx. 2550 kg (payload may vary depending on equipment and build) Tyres: 13 inch Load height: approx. 695 mm Electric hydraulic pump with wired remote control, battery, and manual emergency pump Battery and hydraulic unit with cover Tip angle to rear and sides: approx. 45° Robust black steel side panels, foldable and removable Stable lever locks on the side panels V-type drawbar bolted to a welded frame structure, hot-dip galvanized Chassis and tipping bridge hot-dip galvanized Heavy-duty tipping bridge made from a single piece of steel (completely wood-free) 4-stage tipping cylinder Pendulum tailgate 13-pin connector with reversing light 8 recessed lashing points integrated into the platform floor, lashing force 800 kg per ring Heavy-duty automatic jockey wheel Integrated ramp slot for easy retrofitting of aluminium loading ramps Mud flaps Side marker lights Including vehicle documents Possible additional options and accessories for this trailer: - 600 mm mesh side extension - Additional side panel extension 350 mm - 600 mm aluminium sheet extension - Aluminium loading ramps with 2800 kg load capacity per pair - Tie-down hooks mounted on side panels - Load securing net - Shock absorbers - Toolbox - Registration of your new trailer at the local vehicle registration office

Stanje: novo, Posoda 400 mm za kavljasto napravo Konos Tandem Notranje mere: 2500 x 1770 x 400 mm (D x Š x V) Bdjdpfoy H Nq Eox Al Hjb Lastna teža: 340 kg Vsebina: cca. 1,70 m³ V celoti iz pocinkanega jekla Zadnja krilna vrata s kontejnerskim zaklepom Možne dodatne možnosti in dodatna oprema za to posodo: Kljuke za mrežo Kontejnerska mreža Privezne zanke

Stanje: novo, The flexible solution, for example, on construction sites: Roll-off bin and tipper in one! You can roll off the bin and, for example, leave it filled with material at one location, while using the actual trailer/hook lift device to transport another bin. Alternatively, activate the tipping function to conveniently and easily unload bulk material at a specific site. Manufacturer: Vezeko Model: Konos 35 Gross weight: 3,500 kg Unladen weight without bin approx. 835 kg Payload: approx. 2,665 kg (payload specification may vary depending on equipment and design) Completely welded, torsion-resistant chassis, painted in grey RAL 7015 Reinforced automatic jockey wheel Electrohydraulic operation with remote and cable control possible Charging cable for 12V battery with connector Overrun brake with fully automatic reverse and parking brake The independent suspension ensures optimal driving characteristics even under heavy loads Bjdpfx Aoy H Nqxsl Hedb Automatic coupling with safety and wear indicator Single-stage hook lift system Hook height: 900 mm 13-pin connector Would you like to significantly increase your flexibility? Then equip your Konos 35 trailer with various optional bins with or without mesh sides, flatbeds with or without mesh sides, or containers. This way, you can serve multiple construction sites with just one trailer. Galvanized steel roll-off bin 2470 x 1780 x 450 mm (LxWxH) with double wing rear doors – €1,895.00 plus VAT Galvanized steel roll-off bin 2470 x 1780 x 1050 mm (LxWxH) with double wing rear doors – €2,117.00 plus VAT Container/box body 2390 x 1790 x 2100 mm (LxWxH) – €5,744.00 plus VAT Storage container made of galvanized sheet 2500 x 1800 x 1960 mm (LxWxH) – €3,749.00 plus VAT Flatbed 2470 x 1790 x 350 mm (LxWxH) with 3 mm sheet steel floor and 350 mm aluminum drop sides – €2,232.00 plus VAT Mesh extension for roll-off bin – 550 mm – €755.00 plus VAT Mesh extension for roll-off bin – 800 mm – €800.00 plus VAT Mesh extension for roll-off bin – 1050 mm – €851.00 plus VAT Side board extension for roll-off bin – 550 mm, steel – €1,018.00 plus VAT Flat tarpaulin for roll-off bin – €245.00 plus VAT Mesh extension for flatbed – 550 mm – €755.00 plus VAT Mesh extension for flatbed – 800 mm – €800.00 plus VAT Mesh extension for flatbed – 1050 mm – €851.00 plus VAT Side board extension for flatbed – 350 mm, aluminum – €707.00 plus VAT Flat tarpaulin for flatbed – €245.00 plus VAT Additional options: Load securing nets for bin and/or flatbed including robust net hooks available separately Painting of hook lift device in other RAL colors possible (subject to extra customer order, please inquire about delivery times) Anti-theft device We are happy to handle registration for you (for a fee)

Stanje: novo, Kontejner za prikolico s kavlji Konos, popolnoma vroče pocinkan Proizvajalec: Vezeko Bodpfx Aljy H Nqlo Hsdb Tip: Kontejner za Konos Mere: 2390 x 1790 x 2100 mm (D x Š x V) Sandvič konstrukcija iz jeklene pločevine, stene debeline 50 mm Barva: srebrna Tla iz protizdrsne vezane plošče Zadnja krilna vrata 8 privezovalnih obročev na nakladalni površini Lastna masa: pribl. 512 kg Možne dodatne možnosti in oprema za ta kontejner: Na voljo tudi v zunanji barvi beli ali črni Varovalne palice za optimalno zavarovanje tovora

Stanje: novo, Rear tipper with hydraulic electric pump and side wall extension Manufacturer: Cheval Liberté Debon Model: PW1.2E Lux Dimensions: approx. 3050 x 1550 x 600 mm (L x W x H) Permissible total weight: 2,000 kg Unladen weight: approx. 560 kg Bdodpfx Alsy H Nn De Hjb Payload: approx. 1,440 kg (payload may vary depending on equipment and configuration) Electro-hydraulic pump incl. battery for tipping at the push of a button Charging port for battery charger outside battery box Removable aluminium side boards Side wall extension: 300 mm Corner posts removable without tools Combination floor: robust phenolic plywood with galvanised steel sheeting H-frame (ladder rack) at front for transporting long materials Heavy-duty tension locks Automatic jockey wheel Marker lights Frame welded and fully hot-dip galvanised Protected lighting front and rear 6 lashing rings (3 per side) Safety support for securing the tipper bridge during maintenance Fold-down front wall Mud flaps Front and rear flap with retaining cables for transporting long materials Incl. vehicle documentation Available options and accessories for this trailer: Flat tarpaulin Mesh side extension 600 mm Load securing net Shock absorbers incl. certificate for 100 km/h

Stanje: novo, Three-way tipper with steel side wall extension Manufacturer: Unsinn Model: UDK-B 3617-35-14 Platform dimensions: 3660 x 1750 x 1100 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: 985 kg Payload: 2515 kg (payload may vary depending on equipment and configuration) Tyres: 185 R14 C Steel side wall extension: 750 mm Automatic jockey wheel One-piece pressed steel floor across the full width Patented load securing system with 14 lashing points on and under the platform Each lashing point load capacity: 1500 daN (kg), 360° rotatable Side walls foldable and completely removable Tailgate with steel panelling, foldable, including anti-slip protection for ramps 4 detachable steel corner stanchions Electric pump Manual emergency pump (Pumpless System) Hydraulic connection for towing vehicle (additional) 2 rear work lights Lighting system with 13-pin plug Reversing light Including vehicle documents Bdedpfxsy H Nm Ts Al Hsb Available options and accessories for this trailer: - 100 km/h certificate - Spare wheel incl. bracket - Drop-down support legs - Anti-theft device - Drawbar cover - Registration of your new trailer at the local vehicle registration office

Stanje: novo, Rear tipper trailer with hydraulic electric pump and mesh extension Manufacturer: Cheval Liberte Debon Model: PW1.2E Lux Dimensions: approx. 3050 x 1550 x 900 mm (L x W x H) Permissible total weight: 2,000 kg Unladen weight: approx. 560 kg Payload: approx. 1,440 kg (payload may vary depending on equipment and configuration) Electro-hydraulic pump incl. battery for tipping at the push of a button Contrary to the images, the trailer does NOT have a battery cover! Charging port for battery charger located outside the battery box Front and rear drop-down panels with retaining cables for transporting longer materials Mesh extension: 600 mm high Removable aluminium drop sides Corner posts removable without tools Combination floor: robust phenolic resin-coated plywood with galvanized steel sheet Heavy-duty toggle fasteners Automatic jockey wheel Marker lights Frame welded and fully hot-dip galvanized Protected lighting front and rear 6 lashing rings (3 per side) Safety support strut for securing the tipper bed during maintenance Folding front wall Mud flaps Includes vehicle documents Bdodpjy H Nizjfx Al Hsb Available optional equipment and accessories for this trailer: Flat tarpaulin Side wall extension: 300 mm Load securing net * Shock absorbers incl. 100km/h approval

Stanje: novo, Special Price!! - Stock vehicle from year 2021, never registered 9927811 Böckmann three-way tipper with electric pump and steel drop sides, professional version Manufacturer: Böckmann Model: DK-ST 4121/35 P Internal dimensions: 4140 x 2100 x 400 mm (LxWxH) Gross vehicle weight: 3500 kg Unladen weight: approx. 1386 kg Payload: approx. 2114 kg (payload may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Magnetic cable remote control with flexible coiled cable for electric pump can be attached anywhere on the chassis Emergency stop battery master switch AL-KO heavy-duty automatic jockey wheel Extra robust hot-dip galvanized steel drop sides, 400 mm high Removable steel corner posts Removable side panels Fold-down front panel allows transport of longer materials Rear drop tailgate Integrated ramp compartment at the rear for loading ramps Integrated securing rail for attaching loading ramps at the rear Welded and hot-dip galvanized frame and tipping bed construction for increased stability, torsional and tipping resistance 4 stable, rattle-free lashing rings (pulling force: 500 kg) Integrated holes in side frame for easy retrofit of additional lashing points 14" tyres provide high ground clearance Safety support for securing the tipping body during maintenance Robust toggle latches on the drop sides Plastic mudguards at rear including mud flaps Rigid combination floor – continuous phenolic resin-coated plywood reinforced with galvanized steel for high point loads and impact resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Battery and all electronics housed in a splash-proof casing Hydraulic hoses securely routed inside longitudinal frame Includes vehicle documents Optional equipment and accessories for this trailer: - Shock absorbers incl. 100 km/h certification - Ramp compartments incl. aluminum loading ramps - Charger for tipper with electric pump and adapter Bsdpfxjy H Nhdj Al Hjdb - Mesh extension (600 or 1000 mm) - Side panel extension 350 mm - Load securing net - Net hooks mounted all around the side panels - Toolbox/storage box fitted at the front panel or under the loading area - Spare wheel including bracket - Anti-theft device - Registration of your new trailer with the local vehicle registration office

Stanje: novo, Special offer – Stock vehicle from 2022 – Never registered! Böckmann Three-way Tipper with Electric Pump and Steel Sidewalls Manufacturer: Böckmann Model: DK-ST 3218/30 P Internal dimensions: 3240 x 1800 x 400 mm (L x W x H) Gross vehicle weight: 3,000 kg Unladen weight approx. 1,055 kg Payload approx. 1,945 kg (payload figures may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Wired remote control for electric pump Battery charging interface incl. cable 14-inch tires Automatic jockey wheel (the heavy-duty automatic jockey wheel shown in the photos is only available on the 3.5 t version) Extra sturdy, hot-dip galvanized steel sidewalls, 400 mm Removable steel corner posts Removable sidewalls Track channel in upper frame (easy retrofit for loading ramps) Rear tipping tailgate 4 stable, rattle-free lashing rings Safety prop to secure tipping body during maintenance Foldable front panel allows transport of longer materials Robust lever fasteners on sidewalls Plastic mudguards at rear incl. mud flaps Durable phenolic plywood floor panel with galvanized steel bottom sheet for high point loads 2 large wheel chocks Front marker lights V-drawbar Sturdy net hooks on both sides underneath the loading area Incl. vehicle documents Possible additional options and accessories for this trailer: Bedpfx Asy H Nd Sel Hsdb Shock absorbers incl. 100 km/h approval 3-sided mesh extension, foldable, 600 mm Continuous net hooks fitted along sidewalls Additional sidewall extension 350 mm Aluminum loading ramps, 2.7 t capacity Toolbox mounted on front wall or under loading area Load securing net Flat tarpaulin available in various colours

Stanje: novo, Three-way tipper with electric pump Manufacturer: Unsinn Model: UDK 3017-30-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3,000 kg Unladen weight: approx. 835 kg Payload approx.: 2,165 kg (Payload specification may vary depending on equipment and configuration) Electrohydraulic pump with emergency hand pump, allows tipping via cordless screwdriver when battery is low Integrated battery charger with 230 V plug Battery and pump unit safely and dust-protected stowed in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps underneath the platform (for easy retrofit of ramps) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Heavy-duty steel floor plate across the full vehicle width Maintenance support bar for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap reel for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 10 recessed lashing points mounted in the steel floor Lashing points above and below the platform, loadable up to 1,500 kg each and 360° rotatable Drop sides fully foldable and removable Rear drop side foldable, steel-plated, including run-off protection for loading ramps Robust toggle latches on the side panels 4 plug-in steel corner stanchions Lighting with 13-pin plug and reverse light Including vehicle documents Possible options and accessories for this trailer: Bdjdpfx Aley H Nbdj Hjb Mesh extension, steel extension, or side wall extension—choose your preferred version and customize your build Thanks to the clever KOMBILINE system, the extensions can easily be combined. For example, mesh extensions on the front and rear can be perfectly combined with steel or side wall extensions on the sides—no extra effort required Loading ramps Support stands Load securing net Anti-theft device Registration of your new trailer at the road traffic authority

Stanje: novo, Three-way tipper with electric pump Manufacturer: Unsinn Model: UDK 3617-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload approx.: 2595 kg (payload may vary depending on equipment and configuration) Electro-hydraulic pump with emergency manual pump – enables tipping with a cordless screwdriver in case of low battery Integrated battery charger with 230 V plug Battery and pump unit safely and dirt-protected stored in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the platform (for easy retrofitting of ramps) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Massive steel floor running over the entire width of the trailer Maintenance support for securing the tilted body Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap dispenser for easy handling Load securing system for more flexibility and efficiency in load securing, DEKRA certified Bsdpjy H Na Tsfx Al Hedb 14 recessed lashing rings mounted in the steel floor Lashing rings on and under the platform, each loadable up to 1500 kg and rotatable 360° Sidewalls can be fully folded down and removed Tailgate with fold-down steel covering including anti-slip protection for loading ramps Robust lever locks on the sidewalls 4 plug-in corner stanchions made of steel Lighting with 13-pin plug and reversing light Including vehicle documents Available options and accessories for this trailer: Whether mesh attachment, steel extension or sideboard extension – choose the suitable variant and customize your superstructure individually. Thanks to the ingenious KOMBILINE system, extensions can be combined easily with each other. For example, a mesh attachment at the front and rear can be perfectly combined with a steel or sideboard attachment at the sides without additional effort. Loading ramps Support legs Load securing net Anti-theft device Registration of your new trailer at the local vehicle registration office

Stanje: novo, Böckmann rear tipper trailer with electric pump Manufacturer: Böckmann Model: RK-AL 3016/27 Internal dimensions: 3060 x 1650 x 300 mm (L x W x H) Gross vehicle weight: 2,700 kg Unladen weight: 773 kg Payload approx. 1,927 kg (Payload figures may vary depending on equipment and configuration) Electric hydraulic pump with battery and additional emergency hand pump Automatic jockey wheel Drawbar length (cantilevered): 1,200 mm Safety support for securing the tipping platform during maintenance Combination floor (durable phenolic resin plywood with galvanized steel sheet) allows for high point loads Removable side panels Removable corner stanchions Robust lever locks on the side panels 6 heavy-duty, rattle-free lashing rings Foldable front panel for transporting longer materials Plastic rear mudguards including mudflaps Front marker lights V-shaped drawbar Sturdy net hooks on the side under the loading area Coupling head with collision guard Including vehicle documents Additional options and accessories available for this trailer: 13" tyres instead of 14" for reduced loading height Shock absorbers including 100 km/h road approval 600 mm mesh extension Bjdpfxey H I U Ao Al Hsdb Aluminium loading ramps (stowable underneath) Additional 350 mm side panel extension Rear stabilizer legs (crank supports) Hydraulic connection for tractor Registration of your new trailer at the road traffic authority

Stanje: novo, Three-way tipper with electric pump & cordless screwdriver pump and side wall extension Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: approx. 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload approx.: 2595 kg (payload may vary depending on equipment and configuration) With the innovative hinge system of the KombiLine, the extensions can be conveniently folded down in just a few quick steps, making loading and unloading the trailer especially ergonomic, easy, and time-saving. Electrohydraulic pump with backup manual pump for easy tipping using a cordless screwdriver in case of low battery. Integrated battery charger with 230 V plug. Battery and pump unit are securely stored in the battery box, protected from dirt. Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the loading platform (for easy retrofitting of loading ramps). Maintenance support strut for securing the tilted platform during maintenance work. Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics and high stability. Closed, fully welded and hot-dip galvanised steel frame profile. Continuous solid steel floor across the entire vehicle width. Reinforced automatic jockey wheel. Maneuvering handle with practical ratchet strap reel for easy handling. Load securing system for increased flexibility and efficiency in load securing, DEKRA certified. 10 recessed lashing pins fitted in the steel floor. Lashing pins above and below the loading platform, each with a load capacity of up to 1500 kg and 360° rotatable. Side walls completely foldable and removable. Tailgate with foldable steel plank including anti-slip protection for loading ramps. Robust cam lever locks on the side walls. 4 removable steel corner stanchions. Lighting with 13-pin connector and reversing light. Incl. vehicle documents. Available options and accessories for this trailer: Aluminium loading ramps Load securing net Supports Bdedpfey H D Irsx Al Hsb Anti-theft device Registration of your new trailer with the vehicle licensing authority

Stanje: novo, Rückwärtskipper mit E-Pumpe, Handnotpumpe und Auffahrrampen Bsdpoy H Dl Rsfx Al Hsdb Hersteller: Eduard Typ: 3116-4-1O3-2763-P Innenmaße: ca. 3100 X 1600 X 300 mm L.B.H. Zul. Gesamtgewicht: 2700 kg Eigengewicht: ca. 763 kg Nutzlast: ca. 1937 kg (Nutzlastangaben können je nach Ausstattung und Konstruktion abweichen) Ladehöhe: 630 mm E-Pumpe und Handnotpumpe Bodenplatte Stahlblech verzinkt auf Siebdruckplatte Stahlrahmen feuerverzinkt Spannverschlüsse Aluminium Bordwände 300 mm klappbar und abnehmbar Auffahrrampen unterschiebbar Stützen hinten 10 Verzurrösen im Bodenrahmenprofil Eckrungen abnehmbar 13-poliger Stecker Automatikstützrad Begrenzungsleuchten Keile inkl. Halter Inkl. Fahrzeugpapiere Mögliche Optionen und Zubehör für diesen Anhänger: Reserverad inkl. Halter Stoßdämpfer inkl. 100 km/h Abnahme Gitteraufsatz Stützen Diebstahlsicherung * Zulassung Ihres neuen Anhängers beim Straßenverkehrsamt

Stanje: novo, Rear Tipper Trailer Manufacturer: Eduard Model: 2615-3-13-1563-J Internal dimensions: approx. 2560 x 1500 x 300 mm (L x W x H) External dimensions: approx. 3835 x 1560 mm (L x W) Gross vehicle weight: 1500 kg Unladen weight: approx. 453 kg Payload: approx. 1047 kg (Payload may vary depending on equipment and design) Loading height: 630 mm Operated by hand pump Floor: galvanized steel sheet on anti-slip plywood panel Chassis: hot-dip galvanized steel frame Tension locks Aluminum side panels, 300 mm, foldable and removable 10 lashing rings integrated in the floor frame profile Removable corner posts 13-pin plug Automatic jockey wheel Marker lights Wheel chocks incl. holder Includes vehicle documents Bsdpfjy H Dlksx Al Hsdb Available options and accessories for this trailer: - Spare wheel incl. holder - Shock absorbers incl. 100 km/h approval - Mesh extension - Support stands - Loading ramps - Anti-theft device - Registration of your new trailer at the road traffic authority We are happy to show you how you can finance your new trailer conveniently in affordable monthly installments and provide you with a tailored financing offer. We have more than 2,000 trailers in stock at all times. You can find a selection of our trailers online at Alternatively, visit us in Horn-Bad Meinberg – we look forward to seeing you! Please note: Images may depict optional extras not included in the standard scope of delivery. Due to continuous product development, illustrations and technical data may differ slightly. Errors and changes excepted.

Stanje: rabljeno, konfiguracija osi: 4x2, skupna dolžina: 6.770 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, barva: oranžna, Leto izdelave: 2013, prevoženi kilometri: 162.377 km, moč: 132 kW (179,47 KM), vrsta prenosa: mehanski, emisijski razred: Euro 5, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, zapora diferenciala, = Dodatne opcije i oprema = - Klima uređaj - Radio = Dodatne informacije = Prazna masa: 6.300 kg Bodpfoyat T Ajx Al Hsdb Nosivost: 1.490 kg GVW: 7.490 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2018, barva: srebrn, Leto izdelave: 2018, Oprema: ABS, = Dodatne možnosti in oprema = - Lahka aluminijasta platišča - Zračno vzmetenje - Kolutne zavore = Opombe = Bsdpfx Aley Drv Es Hedb Schmitz Cargobull Gotha SGF S3 45m3 2018 11/2018 Kiper WSK000001300685 Lahka aluminijasta platišča, dvignjena os, Smart board Schmitz Cargobull Gotha SGF S3 45m3 2018 11/2018 Kiper WSK000001300684 Lahka aluminijasta platišča, dvignjena os, Smart board = Dodatne informacije = Lastna masa: 6.457 kg Nosilnost: 29.543 kg GVW: 36.000 kg Tehnični pregled (APK): veljaven do 11/2026

Stanje: novo, Debon three-way tipper with ramps and support legs Manufacturer: Debon Model: PW2.4E Dimensions: 3060 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 2,600 kg Unladen weight: approx. 710 kg Payload: approx. 1,890 kg (Payload specifications may vary depending on equipment and design) Rear crank supports Retractable loading ramps Tip at the push of a button: Electro-hydraulic tipping function with battery and battery cover 4-stage hydraulic cylinder Frame fully welded and fully galvanized Aluminium side panels 350 mm Removable side and corner posts Ladder rack on the front wall (galvanized, removable) for transporting long materials Retaining cables on the front and rear flaps for through-loading long materials Robust, rattle-free toggle latches on the side panels 6 sturdy lashing rings Bedpsy Hwcvofx Al Hjdb Safety support to secure the tipping platform during maintenance Ramp compartment for easy retrofitting of loading ramps Automatic jockey wheel Combination floor: Stable anti-slip plywood floor plate with galvanized steel sheet for high point loads Charging port outside the battery box allows battery charging without tipping 13-pin plug Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h type approval Mesh extension 600 mm Hooks for load securing net Load securing net Spare wheel including holder Anti-theft device Registration of your new trailer at the vehicle registration office

Stanje: novo, Dreiseitenkipper Hochlader mit Bordwandaufsatz 700 mm Hersteller: Eduard 4020-4-3O3-3563-P BWE Innenmaße: ca. 4000 X 2000 X 1000 mm L.B.H. Zul. Gesamtgewicht: 3500 kg Eigengewicht: ca. 803 kg Nutzlast: ca. 2697 kg (Nutzlastangaben können je nach Ausstattung und Konstruktion abweichen) Ladehöhe: 630 mm Elektrohydraulische Pumpe mit Nothandpumpe Bodpfx Alsy Hwb Ej Hsdb Schienenschacht unter der Ladefläche Einhängbare Auffahrschienen 2 Stützen hinten Stahlrahmen feuerverzinkt Spannverschlüsse Aluminium Bordwände 300 mm klappbar und abnehmbar Bordwandaufsatz 700 mm pendelbar 12 Verzurrösen im Bodenrahmenprofil, 800 daN (kg) 10 Verzurrpunkte außen Eckrungen abnehmbar 13-poliger Stecker Automatikstützrad Begrenzungsleuchten Keile inkl. Halter Inkl. Fahrzeugpapiere Mögliche Optionen und Zubehör für diesen Anhänger: Radstoßdämpfer inkl. 100 km/h Gutachten Reserverad inkl. Halter Diebstahlsicherung Ladungssicherungsnetz Zulassung Ihres neuen Anhängers beim Straßenverkehrsamt

Stanje: novo, Rückwärtskipper mit Gitteraufsatz Hersteller: Eduard Typ: 2615-3-13-1563-J Innenmaße: ca. 2600 X 1500 X 1000 mm (Länge x Breite x Höhe) Außenmaße: ca. 3835 x 1560 mm (Länge x Breite) Zulässiges Gesamtgewicht: 1500 kg Eigengewicht: ca. 447 kg Nutzlast: ca. 1053 kg (Nutzlastangaben können je nach Ausstattung und Konstruktion abweichen) Ladehöhe: 630 mm Handpumpe Bodenplatte aus verzinktem Stahlblech auf Siebdruckplatte Bjdpfx Aoy Hwahel Hodb Feuerverzinkter Stahlrahmen Spannverschlüsse 300 mm hohe klappbare und abnehmbare Aluminium-Bordwände 700 mm Gitteraufsatz 10 Verzurrösen im Bodenrahmenprofil Abnehmbare Eckrungen 13-poliger Stecker Automatik-Stützrad Begrenzungsleuchten Keile inkl. Halter Inklusive Fahrzeugpapiere Mögliche Optionen und Zubehör für diesen Anhänger: Reserverad inkl. Halter Stoßdämpfer inkl. 100 km/h Abnahme Stützfüße Auffahrrampen Diebstahlsicherung Zulassung Ihres neuen Anhängers beim Straßenverkehrsamt

Stanje: novo, moč: 162 kW (220,26 KM), konfiguracija osi: 4x2, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, skupna širina: 24.500 mm, skupna višina: 28.300 mm, dolžina tovornega prostora: 40.000 mm, širina tovornega prostora: 23.000 mm, višina nakladalnega prostora: 5.000 mm, Oprema: ABS, EBS (Elektronski zavorni sistem), klimatska naprava, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Iveco Eurocargo ML80E22 4x2 Meiller Three-Way Tipper Bdodpfsy H Uuiex Al Hsb Axle configuration: 2 axles, rear-wheel drive, cab variant: standard day cab. Engine: 220 T7, ZF Automatic Transmission 8AP. Permissible gross weight: 8 t. Drive axle: single-reduction, single axle, mechanical suspension, disc brakes (front/rear). Vehicle variant: standard chassis with cab. Wheelbase: 3,105 mm. Gearbox mode: standard. Driver fatigue warning system (Driver Drowsiness Attention Warning). AdBlue tank heater. Standard taillights. Electronic Stability Program (ESP). Engine intake air pre-heating for optimal cold starting under extreme temperatures. Rear-view monitoring system with camera. Blind spot monitoring system (BSIS) on the right. Intelligent Speed Assistant (ISA). Front detection system (MOIS). Pneumatic parking brake. 120-liter plastic fuel tank, lockable. Plastic steering wheel. Heated fuel pre-filter on chassis. IVECO logo standard in light grey. Standard chassis component positioning. Connector cable for alcohol interlock device (ALC). 30-liter AdBlue tank. Rear axle ratio: 3.73. Tyre Pressure Monitoring System (TPMS) with internal sensors. Steel wheels. Lane Departure Warning System (LDWS). Connectivity Box 4G incl. TCO service contract. Voltage converter 24/12 volts (10.5 amps). Hill Holder for easy hill starts. Advanced Emergency Braking System (AEBS). Speed limiter at 90 km/h. Adaptive Cruise Control (ACC). Clothes rail on rear cab wall with movable hooks. Front halogen headlights. COC general operating permit. Onboard tools. RADIO with Bluetooth, DAB+ and 7” display. Warning beacon. Standard vehicle badge. Roof hatch, mechanical version. First-aid kit. Comfort driver’s seat: 4-way adjustable, air-suspended, integrated headrest and 3-point seat belt. Plastic bumper. Cab attachments black. Double passenger bench for 2 people; centre seat with 2-point belt. EU digital tachograph 4.1. Unheated windscreen. Standard permissible total weight. 2 wheel chocks. Moderate climate version. Front shunting and towing eye. C-profile steel ladder frame. Air tanks in steel; number depends on suspension and trailer version. Chassis corrosion protection with Tectyl 300 G Clear. ZF 8AP800 automatic gearbox. Central exhaust outlet. PTO prep includes dashboard switches and wiring along chassis frame. Air filter unit under cab. Emission standard EURO VI E, NOISE ECE 51/03. Two-stage engine brake, activated via right steering column stalk. Westinghouse brake system. Auxiliary PTO control extension module. Ball coupling, brand Orlandi, max. 3,500 kg permitted trailer weight, braked. Tyres: DRIVE T. 235/75R17.5. Spare wheel, dimension matches chassis tyres. Locking differential on drive axle(s), selectable. No battery master switch. Toll system preparation (OBU) with antenna and dashboard wiring (no receiver unit). Cab rear wall with window—recommended for open bodies for rear traffic observation. Mirrors for 2,500 mm body width. Electronic immobiliser and 3rd vehicle key. Compressed air connection in engine tunnel console, ...