Stihl Rmi 522 C nakup rabljenega (39.657)

Stanje: rabljeno, največja dovoljena obremenitev: 24.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, Oprema: ABS, MÜLLER MITTELTAL T 3 Profi 3 x 10.000 kg osi Jeklena listnato vzmetenje ABS Razširljiv na 3000 mm Vzmetene rampe dolžine 2600 mm Nakladalna površina 7600 mm Žepi za vstavljive stebričke Lrjdpfxoy Dkpds Aibsk Privezne zanke Nemška homologacija 1 lastnik Duomatic priključek Rotacijska opozorilna luč Tabla za razširitev Pnevmatike cca 50 % itd....

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profile 30.0: * EBS-E (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lift/lower system * SmartBoard as trailer infotool with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panels front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Folding (hot-dip galvanized) lid for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) mounted right side * 15-pin electrical connector * LED lighting 12/24 V * LED beacon (removable) at rear * Side marker lights with indicator function * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * Tire pressure monitoring system with display option in truck via EBS signal (no truck-side installation required) * Rubber lining on folding ramps as well as on the access slope, left and right (approx. 860 mm long) * Rubber lining on the longitudinal beams from front to rear crossmember Ljdpfeq Dyvcjx Aibjrk * Hardwood floor on the running surfaces of the low-bed platform * Each side with 4 stake pockets, with simultaneous 2-ton lashing capacity * Load securing package consists of: 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame—in the corners 13.4 tons, elsewhere 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not possible in rear slope) * Board holder under the loading area, lengthwise * Roller stop raised in front of front crossmember with 1 x 6.4-ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump flow in truck over 40 to max. 140 l/min) * Hydraulic control block splash-proof * Two-line hydraulics * Platform over kingpin: approx. 1,960 x 2,520 mm * Rear platform: approx. 6,500 x 2,520 mm (including 860 mm access slope) * Loaded deck height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding width extensions & loading ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted black * Loaded height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20 of 2026

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders Lrsdpfx Aetplv Nsibok * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as information tool on the trailer with pressure sensors for axle load display per axle group * Side underrun protection * Manually adjustable warning sign sets at front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin electric connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment by tension spring & turnbuckle * Tire pressure monitoring system with display option in the truck cab via EBS signal (no in-truck installation required) * Rubber covering on folding ramps as well as on drive-up slopes left and right (approx. 860 mm long) * Rubber covering on longitudinal beams from front to end crossmember * Hardwood flooring on the running surfaces of the low-bed platform * Four stake pockets per side, each with 2 t lashing capacity * Load securing package consists of: 5 pairs of UVV-compliant lashing rings, tilting and retractable, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t * Six pairs of manual folding extensions for 3 m total width (not at rear slope) * Plank holder under the loading platform, longitudinal direction * Raised roller stop before front crossmember with one 6.4 t lashing eye per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extended ramp tip and load-holding valves * Hydraulic lateral ramp shift * Hydraulically operated rear support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 l/min up to max. 140 l/min) * Hydraulic control block, splash-proof * Two-line hydraulic system * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm run-up slope) * Loaded loading height: approx. 890 mm +/- 20 mm (air suspension) * Chassis, turntable, roller stop, folding extensions & drive-up ramps hot-dip galvanized * Axles, slewing ring, drawbar, air tanks, etc. painted in black tone * Loaded loading height: approx. 890mm +/- 20mm * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 20/2026

Stanje: rabljeno, lastna masa: 5.750 kg, največja dovoljena obremenitev: 24.250 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 141/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 141/140J, velikost zadnje pnevmatike: 235/75R17,5 141/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Lodpfx Asyvlk Hoiberk

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Equalizer block for low-bed semi-trailers incl. container locks. Price per equalizer block. -- Subject to typographical errors, mistakes, and changes. Sample images --. More data at: !, More Details: ! Lsdpfx Aisyu Uukebork

Stanje: rabljeno, največja dovoljena obremenitev: 39.500 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2010, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 9.345 mm, Leto izdelave: 2010, * Müller Mitteltal T50 Compact * Low loader * Ramps Lsdpoyzlyxofx Aiberk * Tires: see pictures * 5 axles * Gigant axles * Permissible total weight: 50,000 kg * Unladen weight: 10,500 kg * Payload: 39,500 kg * Air suspension * Immediately available * Subject to error We offer: Net purchase for companies from the EU with VAT number as well as customers from third countries. Leasing and financing. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to port. All prices quoted on classifieds are gross prices and already include the statutory VAT of 19%.

Stanje: rabljeno, lastna masa: 6.200 kg, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2006, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 141/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 141/140J, velikost zadnje pnevmatike: 235/75R17,5 141/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Lodpfsyurvrex Aibork

Stanje: rabljeno, največja dovoljena obremenitev: 13.860 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 10 m³, Oprema: ABS, ? pocinkano podvozje ? nizko sklopljen ? vlečno oko 50 mm ? zaklep za kontejner ? po 12 pritrdilnih obročev na vsaki strani ? vzvratna kamera ? bobnaste zavore ? duomatski priključek ? ABS ? zračno vzmetenje ? orodjarna ? EBS Lrodoxb Ig Sepfx Aibjk ? podporne noge ? dvojna kolesa ? BPW osi Vse informacije brez garancije / Vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 13.860 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 10 m³, Oprema: ABS, ? pocinkano ogrodje ? nizko spojeno Lrjdpjxb Igljfx Aibsk ? vlečno uho 50 mm ? zaklep zabojnika ? po 12 priveznih obročkov na stran ? vzvratna kamera ? bobnaste zavore ? Duomatic priključek ? ABS ? zračno vzmetenje ? orodjarna ? EBS ? podporne noge ? dvojne pnevmatike ? BPW osi Vsi podatki brez garancije / vmesna prodaja pridržana.

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power socket * LED tail lights * RDÜ tire pressure monitoring system ----General Attachments: Lsdpopk Dyxefx Aibjrk * Jost landing gear (front) * 2 x rear externally mounted drop-down supports * Enclosed single plastic mudguards * Folding "A" sign at the rear * Plastic underride guard buffers * Hot-dip galvanized protective underrun bar with integrated chain storage box, dimensions: W=370 mm x D=420 mm x H=480 mm, front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners on the outer frame with chain box * Equalizing chain on both sides with eye and quick shortener, Y-special version, 6.3 t ----Skip Stops: * 2 interchangeable skip stops for lateral centering of skips * Front skip stops with swing-mounted stop, plug-in at 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Information: * Lashing force with load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * 2 x external drop supports at the rear * Closed plastic single mudguards * Folding "A" plate at the rear * Plastic underrun protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Skip Stops: * 2 removable skip stops for sideways centering of skips * Front skip stops with swiveling stop, pluggable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black Lodpol Thyqefx Aibjrk ----Information: * Subject to errors and prior sale * New vehicle with manufacturer warranty ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * EK 9.6 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange Coupling Eye: * Drawbar as central axle with 40 mm bolted coupling eye * Continuously adjustable drawbar height with screw spindle lift instead of rigid drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with indicator option in the truck via EBS signal -no installation required on the truck side- * 15-pin power connector * LED tail lights * Flashing side marker lights ----General Attachments: * Support winch at front * Closed plastic mudguards * Foldable underride guard for road paver ----Chassis: * Chassis made of high-tensile fine-grain steel ----Tipping Platform: * Pallet - Three-way tipper body * 700 mm steel front wall * Asymmetric aluminum side walls - continuous without central stanchion - foldable with long-travel latches and can swing via manual central locking * 800 mm high steel rear wall with automatic rear wall opening during rear tipping * 4 mm Hardox 450 steel floor ----Load Securing: * Two pairs of 3-ton lashing rings on each side, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underride guard hot-dip galvanized * Tipper body painted in RAL 9010 pure white Lrsdpfx Aisw Ndr Ujbok ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. calendar week 25/2026

Stanje: rabljeno, konfiguracija osi: 3 osi, dolžina tovornega prostora: 92.300 mm, širina tovornega prostora: 24.900 mm, višina nakladalnega prostora: 30.200 mm, Leto izdelave: 2018, Oprema: ABS, = Additional options and equipment = - EBS - Electronic Braking System - Rear air suspension - Front air suspension = Notes = For any inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Müller-Mitteltal TS 3 PROFI 30.0 machine transporter Additional rear spotlights, left and right side; BPW axles; Wabco ABS; drum brakes; spring-loaded brake cylinders; steered third axle; hydraulic loading ramp; side-extending rear stanchions; sliding roof; lateral sliding tarp; permissible gross weight: 36,000 kg (technically 42,000 kg); unladen weight: 11,100 kg; payload: 24,900 kg (technically 30,900 kg); cargo area dimensions: rear to gooseneck: L 9,230 mm W 2,490 mm H 3,020 mm; gooseneck to bulkhead: L 4,000 mm H 2,470 mm; tire tread depth: 1st axle 7–11 mm, 2nd axle 9–10 mm, 3rd axle 8–10 mm. Leasing and financing offers available upon request. Mr. Seidel (by phone) is happy to assist you. Further information available on our homepage. ... Subject to errors, changes, and prior sale! Steering axle Ledpeyxkluefx Aibork = Further information = Unladen weight: 11,100 kg Payload: 24,900 kg Gross vehicle weight: 36,000 kg Please contact Tobias Ebert for further information.

Stanje: novo, Our 20-foot bar containers with rooftop terrace offer the perfect solution for gastronomy, events, or trade fairs. Each container is custom-built to your specifications, ensuring that equipment, design, and functionality are exactly tailored to your requirements. Features ✅ Rooftop terrace with railing, parapet height approx. 90 cm ✅ Cut-out for a staircase, insertable for convenient access ✅ Base container platform with twist-lock system ✅ Steel flooring – highly durable and weather-resistant Equipment ✅ Centred serving hatch, approx. 4 meters wide, foldable with gas struts and drop safety feature ✅ Wooden counter in steel frame, foldable or removable beneath the serving hatch ✅ Personnel door in container style, approx. 1 x 2 meters, painted in anthracite ✅ Paint finish RAL 7016 anthracite – modern and low-maintenance Dimensions External: Length 6,058 mm, Width 2,438 mm, Height 2,591 mm Internal: Length 5,898 mm, Width 2,350 mm, Height 2,390 mm Weight and Capacity Tare weight: 2,200 kg Gross weight: 30,480 kg Volume: 33.2 m³ Key Advantages at a Glance ✅ Custom-built to your requirements ✅ Ideal for sales, bar operation, or events ✅ High-quality construction, weather-resistant and durable Lrjdpfx Aoyvz D Neibok ✅ Rooftop terrace as an attractive highlight for guests ✅ Flexible layout possible for both interior and exterior areas 📩 Send us your plans or ideas and we will provide a tailored quote for your 20-foot bar container with rooftop terrace. Your Globaltainer Team

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and stepless height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck display via EBS signal – no truck-side installation required * SmartBoard infotool with pressure sensors for axle load display by axle group * 15-pin power connector * LED taillights * Removable rear LED rotating beacon Lrjdpfx Aijylfvmobsk ----General Attachments: * Warning sign package front & rear * 2 x toolboxes made of galvanized (powder-coated) sheet steel, approx. 650 x 300 x 600 mm, mounted right-hand side * Closed single plastic fender at the front * Straight rear steel mudguards with spray protection (anti-spray mist) * Side underrun protection ----Low Loader Deck: * Turntable platform extension by 520 mm with 45° corners and 3 recessed storage compartments including lockable lids * Floor over turntable platform made of 50 mm and on the low loader platform of 60 mm softwood * 20 mm rubber flooring in the running area instead of wooden floor, with a recessed bed length of 6,780 mm including the ramp slope * Rubber flooring on ramp slope left and right, approx. 860 mm long * Four stake pockets per side (stakes not included), each with 2 t lashing capability ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Turntable Platform: * 2 pairs of 13.4 t lashing rings on the outer frame of the turntable platform Recessed Bed: * Four pairs of 10 t folding and multi-directional lashing rings per side on the outer frame * Two pairs of 13.4 t swivel lashing rings each at the rear left and right ----Ramps: * Rubber covering on foldable ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m total width (not at the rear slope) * Widening planks stored in a side compartment on the left ----Dipper Stick Rest: * Dipper stick rest over rear axle to end of ramp slope, approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings on the sides of the dipper stick rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output from the truck over 40 – max. 120 l/min) ----Loading Dimensions: * Rear cargo area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Area above turntable: approx. 2,990 x 2,520 mm ----Loading Height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape on sides and rear * Chassis, turntable, ramps, and outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may include special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height Lrodpfxjylfvgo Aibjk ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: rabljeno, največja dovoljena obremenitev: 16.950 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2006, naslednji pregled (TÜV): 04/2026, Leto izdelave: 2006, * Müller Mitteltal T3 NG * Low-loader * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Errors excepted We offer: Net purchase for companies from the EU with a VAT ID number, as well as for customers from non-EU countries. Leasing and financing available. Ledpeyv Ug Defx Aiberk Handling of all customs formalities. Issuance of short-term and export registration plates. Transport to port. All prices listed on classified ad platforms are gross prices and already include the statutory VAT of 19%.

Stanje: rabljeno, prva registracija: 06/2011, skupna širina: 25.500 mm,

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): Ljdpel Tihuefx Aiberk * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: Lrodpfx Aioxptn Dsbsk * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Wir bieten Ihnen unsere gebrauchten 20 und 40 Fuß Kühlcontainer zur Miete an. Aggregate: ✔ Carrier Aggregate oder Thermo King ✔ PTI Geprüft ✔ -25 bis +25 Grad Temperaturbereich ✔ Aluminium T Floor Boden (Innen) ✔ Edelstahl Wände (Innen) Mietpreise wie folgt: Kurzzeitmiete bis 30 Tage: 550 € Lredpfx Asyrry Sjibok ab 90 Tagen: 450 € Langzeitmiete ab 364 Tagen: 350 € Weitere nützlich Informationen: 20 Fuß: Außenmaße: L x B x H 6095 x 2440 x 2590 mm Innenmaße: L x B x H 5775 x 2286 x 2246 mm ----- 40 Fuß: Außenmaße / Innenmaße Länge 12.192 mm / 11.590 mm Breite 2.438 mm / 2.294 mm Höhe 2.896 mm / 2.554 mm Betriebsspannung: 380V/50 Hz Benötigter Anschluss: 5-pol 32A Stromaufnahme: 4,5KWh bis 10KWh Transport Deutschlandweit gegen Aufpreis möglich! Gerne erstellen wir Ihnen auch ein Angebot für die Entladung vor Ort! Egal ob zur Miete oder zum Kauf. Wir freuen uns auf Ihre Anfrage! Team Globaltainer

Stanje: rabljeno, največja dovoljena obremenitev: 29.850 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2012, naslednji pregled (TÜV): 04/2028, Leto izdelave: 2012, Interna številka vozila: G300402 Nemško vozilo Takoj na voljo na našem dvorišču v Kaufungen - Kassel, Nemčija Več INFO pri Luis Lucena Letnik 2012 Lastna masa priklopnika: 6.530 kg Priklopnik mešalec betona LIEBHERR 10 m³ Možne so napake. Lsdpoxy Ul Sofx Aibjrk Z veseljem vzamemo vaše rabljeno vozilo v račun. Financiranje možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Lredpfxjn Aw Hke Aibjk Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: novo, We offer you our brand-new 20-foot shipping containers with steel flooring. Key features: ✔️ Robust steel floor ✔️ Liquid-resistant ✔️ Ideally suited for the storage of chemicals, etc. Your advantages at a glance: ✔️ Dry storage: Containers are wind- and water-resistant ✔️ Safe storage: The container is lockable and solid ✔️ New container – Only one sea voyage Lrsdpfx Aijyv Am Ssbek ✔️ Durable: Thanks to corten steel, shipping containers last well over 30 years ✔️ We can arrange delivery for an additional charge! Optional unloading service available upon request. External/Internal dimensions: Length: 6,058 mm / 5,898 mm Width: 2,438 mm / 2,350 mm Height: 2,591 mm / 2,390 mm Feel free to send us your enquiry! Team Globaltainer

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable Lsdpfxjtplv Tj Aibsrk ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED rear lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Mechanical rear drop supports ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * Suitable for roll-off container transport with lengths from 5,500 - 7,000 mm * Pneumatic 4-point container locking clamps and mechanically lockable end brackets at the front in the guide rails * Load securing certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip locators for lateral centering of the skips, front 4 locators inserted with swiveling stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips * 4 cloverleaf-style lashing rails (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certification according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded beads as anti-slip coating on the slope in the running rail area * 1 pair of aluminum ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Painting: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar, and air tank painted in a black tone * Main frame hot-dip galvanized ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without first registration with manufacturer's warranty * Errors and interim sales excepted ----Delivery Time: * Available from week 20/2026