Stema Priklopnik Z Delovno Ploščadjo nakup rabljenega (27.719)

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profile 30.0: * EBS-E (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lift/lower system * SmartBoard as trailer infotool with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panels front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Folding (hot-dip galvanized) lid for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) mounted right side * 15-pin electrical connector * LED lighting 12/24 V * LED beacon (removable) at rear * Side marker lights with indicator function * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * Tire pressure monitoring system with display option in truck via EBS signal (no truck-side installation required) * Rubber lining on folding ramps as well as on the access slope, left and right (approx. 860 mm long) * Rubber lining on the longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-bed platform * Each side with 4 stake pockets, with simultaneous 2-ton lashing capacity * Load securing package consists of: 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame—in the corners 13.4 tons, elsewhere 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not possible in rear slope) * Board holder under the loading area, lengthwise * Roller stop raised in front of front crossmember with 1 x 6.4-ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump flow in truck over 40 to max. 140 l/min) * Hydraulic control block splash-proof Njdpsq Dyvcjfx Aibela * Two-line hydraulics * Platform over kingpin: approx. 1,960 x 2,520 mm * Rear platform: approx. 6,500 x 2,520 mm (including 860 mm access slope) * Loaded deck height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding width extensions & loading ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted black * Loaded height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20 of 2026

Stanje: rabljeno, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 12/2019, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Oprema: ABS, Vehicle Identification No.: YAMT23XX1K0104335 TELESCOPIC extendable by 7,300 mm CONTAINER POCKETS WADER for 1 x 20", 2 x 20", 1 x 40", 45" container when extended German Inspection (HU) valid until 02/2027 - Safety Inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically/mechanically steered axles with cable control + remote radio control Platform dimensions: 13,500 mm (including 500 mm tapered) - Loading height: 1,100 mm Nledpsywqdusfx Aibja Fifth wheel height: 950 - 1,050 mm Rear steering radius: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket - electro-hydraulic unit Width marker lights Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel carrier WITH spare wheel Changes, prior sale, and errors excepted. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sales law. The purchase contract description is binding. Our offer is generally without new roadworthiness inspection (TÜV). Should a new inspection be desired, we will be happy to provide you with an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 37.420 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, dolžina tovornega prostora: 16.900 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, skupna višina: 3.000 mm, Leto izdelave: 2015, Oprema: ABS, HRD SPTM4A Mega Telescopic Semi-Trailer Serial Number: W09SPTM4NFEN10031 First Registration: 24-03-2015 SAF Axles Lifting Axle 2 Steering Rear Axles Drum Brakes with ABS and EBS Air Suspension Tyres: 235/75 R17.5, 40% tread remaining Gross Weight: 48,000 kg, Unladen Weight: 10,420 kg, Payload: 37,420 kg Total Loading Length: 1,290 cm + 400 cm extendable Loading Floor Height: 95 cm Aluminium Loading Ramps Total Trailer Length: 13.30 m, Width: 2.54 m, Height: 3.00 m Container Lockings for 2x20-foot, 1x40-foot, 1x20-foot in the center Lashing Eyes Stake Pockets Nljdpfx Aiexzmg Rjboa Errors, omissions and prior sale excepted.

Stanje: novo, največja dovoljena obremenitev: 15.825 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including units available for immediate or short-term delivery, on our website. Excerpt from equipment specification. Full equipment details available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly under the load floor, two insertion slots for one ramp each, with locking plate in the rear header frame Underride guard: * According to EC regulations Front landing gear: * Single-sided operated landing legs Rear support: * Two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, manufacturer SAF, drum brakes approx. 300 x 200 mm, hub-centered wheel fixing for twin tyres, ABS, total air suspension travel approx. 200 mm (raise approx. 140 mm, lower approx. 60 mm), operated by hand lever with ratchet function Tyres: * 8 units, 235/75R 17.5 – make as per our choice, on steel rims 6.75 x 17.5, fitted with offset Splash protection: * PVC spray guards in front of and behind axles, EC compliant Load securing: * On the outer frame approx. every 150 mm a hole for lashing straps, tensile strength approx. 2.5 t (lashings can be hooked in with side walls closed, bevelled outer frame) * 6 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 8 t * Stake pockets for removable stanchions 80/50: 3 pairs of stake pockets on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame Front wall: * Made from 25 mm removable front board Lighting system: * Lighting in accordance with EC regulations, 24 volt, multi-chamber tail lights, number plate lights, side marker lights and lane control lights at the rear, connection plate on the left of the drawbar including connection cable with 15-pin and two 7-pin plugs Accessories: * 2 wheel chocks with holders * Removable warning beacon at the rear * Additional 40 mm coupling device supplied (max. GVW 13,500 kg) * Rear extension approx. 800 mm including underride guard, extendable loading platform with load capacity approx. 2 t, locking positions every approx. 200 mm * Mechanically adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolt-on towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets evenly distributed across the loading platform * 12 removable stanchions made of galvanized pipe, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for one 20’ container, container locks extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair aluminum ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of 25 mm side walls and a rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), includes side wall holder at front wall Paintwork: * Chassis shot-blasted, cleaned, and hot-dip galvanized to latest standards * Structure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized & RAL 3002 carmine red Nljdpfxoy Auhbj Aiboa * Side walls: RAL 3002 carmine

Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads. Coupling Device: * Fifth wheel plate with 2-inch kingpin. Nsdpfx Aey Auhzjibola Underrun Protection: * In accordance with EC regulations, bolted design. Side Protection: * In accordance with EC regulations. Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction). Axles: * 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm). * Air suspension control via manual regulator with stop function. Steering: * Last axle steered automatically by rod linkage. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Brake System: * Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck. * Manufacturer: Wabco. Tyres: * 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer). Mudguards: * In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly. Load Securing: * 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each). * 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each). * On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame). Stanchion Pockets: * 10 pairs of stanchion sockets on the outer frame, evenly distributed. * 4 rows of stanchion sockets across the loading area. * Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm. * Rack inside front wall for 20 plug-in stanchions. Front Wall: * Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor fitted into the outer frame. Sideboards: * 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under the chassis. * Insertion rails for sideboards and stanchions on left and right. Lighting System: * In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights. * 1 x 15-pin and 2 x 7-pin socket connectors on front cross member. Equipment: * Wheel chocks with double holder. * Warning signs according to ECE 70. * Work spotlight on lamp bracket (actuated via reverse gear). * Bracket for beacon at rear, including beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paintwork: * Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour. * Chassis: hot-dip galvanized + RAL colour of your choice. * Front wall: RAL colour of your choice. * Sideboards: anod

Stanje: novo, največja dovoljena obremenitev: 38.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment list. Full specification available upon request. EQUIPMENT: * Gooseneck, approx. 4,100 mm long, with central beam * Extendable loading platform, approx. 9,400 mm long, with rear bevel approx. 350 mm x 10° and integrated hook-in strip for attaching loose aluminium access ramps * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the current platform length * Technical fifth-wheel load: 18,000 kg * Suitable for 4x2 and 6x2 tractor units * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand subject to availability * ASPÖCK-UNIBOX * 3 kW electro-hydraulic pump unit for controlling hydraulic functions. Without installation of supply ports on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - the first three pairs lying flat (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 2 inch kingpin * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load approx. 50,000 kg * Approx. 32 mm timber floor on gooseneck and platform, encased in aluminium omega profiles * 10 pairs of recessed lashing rings, foldable outward, in the outer frame of the platform * In front of the last axle and on the rear cross member of the semi-trailer, 1 pair of lashing rings each (LC 10,000 daN) * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the platform, for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the loading platform, on the right in the direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform, left side in direction of travel * Bevel at the rear cross member of the vehicle, approx. 350 mm x 10° * Integrated hook-in strip for loose aluminium access ramps at the rear cross member of the vehicle * 1 pair of drop-in supports at the rear cross member * Remote steered axles from the front and rear using cable remote control, with single-track axle alignment, no installation required in the tractor unit * Round NATO socket at the front connector socket panel (Maeler & Kaege VG 96 917) * 1 LED work light on each side, left and right, mounted on the front wall with wiring to the connector socket for the tractor unit * On the extension an additional locking point every 500 mm * Holder for plug-in stakes, for storage when not in use, inside the front wall of the gooseneck * 4 wheel chocks with holder under the loading platform * Galvanized, sliding width extensions, extendable by approx. 230 mm per side (without timber planks) * 1 LED work light each side, left and right, in front of the axles with wiring to the connector socket for the tractor unit * 2 axle load gauges mounted on the left-hand side including axle load diagram * 1st axle with traction aid * Mounts for warning signs under the gooseneck and at left and right on the rear cross member * A Nsdoy Augdspfx Aibjla

Stanje: novo, največja dovoljena obremenitev: 16.180 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, skupna širina: 2.480 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and soon-available stock on our website. Excerpt from the features list. Full specification available on request. Chassis: * Welded steel construction with welded longitudinal beams and perforated Z-cross members, closely spaced cross members for high floor load capacity * Ramp compartment: between the longitudinal beams, behind the axle assembly underneath the loading floor, two insertion pockets for one each loading ramp, with locking plate in the rear headframe Underrun Protection: * According to EU regulations Landing Gear: * Front: landing legs with one-sided operation * Rear: two adjustable drop supports Axles: * 2 x 10 t air suspension axle assembly, manufacturer SAF, drum brakes approx. 300 x 200 mm, center-aligned for twin tires, ABS, total air suspension stroke approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), operated via hand lever with detent function Tires: * 8-fold, 235/75 R17.5 – our choice of brand. Mounted on 6.75x17.5 wheels with offset Spray Protection: * PVC, in front of and behind the axles, according to EU regulations Load Securing: * On outer frame, approx. every 150 mm, a hole for lashing straps, tensile strength approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t * Stake pockets for slip-in stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed Brake System: * Compressed air brake system as per EU standards with EBS * Two spirals as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor sunk into the outer frame Lighting System: * Lighting system as per EU standards, 24 volts, multi-chamber tail lights, license plate lights, side marker and track marker lights at the rear, connection plate on the left drawbar, incl. interconnection cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holder * Removable flashing beacon at the rear * 40 mm towing device supplied (max. gross weight 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform with load capacity approx. 2 t, locking positions every 200 mm * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets across the load floor, evenly distributed Njdpfsy Auf Tjx Aibola * 12 galvanized steel stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20’ container * Container locks for 1 x 20’ container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technical standards * Superstructure parts cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Add-on parts: galvanized / KTL black

Stanje: rabljeno, največja dovoljena obremenitev: 30.170 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2012, dolžina tovornega prostora: 13.640 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, Oprema: ABS, Ploskovna nadgradnja, talna podloga iz vezane plošče Siebdruck, neprekinjene odprtine za pritrditev v zunanjem okviru, 4 žepki za vstavitev stebrov na vsaki strani, JOST podporne noge, izvlečne opozorilne table, ABS, EBS, BPW EcoPlus os/i, kolutne zavore, zračno vzmetenje z dvigom in spustom, 1. in 3. os – dvižna os, 2x zaboji za orodje, priprava za rotacijsko luč zadaj, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. SI86626 Nlodpfx Aeyytfyjiboa Naša ponudba je načeloma brez nove tehnične kontrole (TÜV). Če želite novo TÜV kontrolo, vam lahko pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Uporabljajo se naši splošni pogoji dobave in plačila. Za ta objekt vam z veseljem pripravimo ponudbo financiranja ali leasinga. Kontaktirajte nas!

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) Nedpfel Tihxjx Aibela * RDÜ tyre pressure monitoring system * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering function * Mounting provisions at the front bulkhead and rear slope for subsequent fitting of container locks for transporting 20" containers * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * Rear external folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, right-hand side * Side underrun protection * Plastic quarter mudguards * 15-pin power socket * LED lights * 21 t GVW version with reinforced frame and reinforced axles * Reinforcement package on the chassis for drilling rig transport * 50 mm softwood floor, clamped design * Provisions at the front bulkhead for retrofitting container locks * Bolted front bulkhead made from smooth sheet metal * Split, foldable trapezoidal-profile steel sidewalls with centre folding stake * Steel rear wall, insertable between ramps – storage bracket inside front bulkhead when not in use * Screw-mounted rear stakes * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for fitting 3 t folding lashing rings every 600 mm * Profifix lashing rail centrally on longitudinal axis for lashing up to LC 3000 daN * 1 x 10 t lashing ring each at front and rear corners * Lashing package: 2 x 8 t retractable lashing rings per side recessed into the outer frame; various holes in the bulkhead and rear crossmember for lashing up to 1.2 t * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (can be collapsed to 20 mm) * Rear entry angle approx. 860 mm on chassis * Drawbar, front wall, tailgate, folding supports and ramps hot-dip galvanised * Axles, springs, air tanks, and landing gear finished in black paint * Load height unladen approx. 940 mm * Loaded approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Side wall painting colour freely selectable up to approx. 2 weeks before production date, except metallic and special colours * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 29 / 2026

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2020, Leto izdelave: 2020, Visit our website, where you will find our complete vehicle inventory with many more photos and information in several languages. SEL 8201 Berger SAPL 24 German registration / 1 owner Nledoxwr E Dspfx Aibsa First registration: 19.11.2020 Year of manufacture: 2020 Gross vehicle weight (kg): 39,000 Permissible total weight (kg): 39,000 Unladen weight (kg): 4,000 VIN: VCBUSLARTLFZT0713 Roadworthiness inspection valid until: 01.2026 TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 3 axles Air suspension Disc brakes BODY STRUCTURE: Internal dimensions: Width (m): 2.48 Length (m): 13.66 VEHICLE DOCUMENTATION: Registration certificate (part I) Registration certificate (part II) Additional documents available on request for a fee. M. BUFANO m. (Italian, English, German) J. CORDEIRO j. (Portuguese, Spanish, Italian, English) J. MARJANOVIC j. (German, Bosnian) L. OBODYNSKA Ukrainian, Russian We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information, we cannot accept liability for errors or omissions. We kindly ask our customers to consult the available photos. The stated dimensions are approximate values. Our vehicles are sold in their current condition. We invite customers to visit our company and inspect the vehicle’s condition in person. We also offer a test drive. Please note that the batteries supplied with the vehicle are those currently installed. If you require new batteries, we are happy to provide pricing information.

Stanje: rabljeno, največja dovoljena obremenitev: 25.380 kg, skupna masa: 32.400 kg, konfiguracija osi: 3 osi, prva registracija: 01/2004, Leto izdelave: 2004, Oprema: ABS, * Cardi trailer * Platform * 1x 40 ft * 2x 20 ft * 1x 30 ft * Steering axle * Air suspension * Disc brakes * Tires: see pictures * Twistlock mountings * Permissible total weight: 32,400 kg * Unladen weight: 7,020 kg * Payload: 25,380 kg * Immediately available * Subject to errors and prior sale We offer: Net purchase for EU companies with valid VAT ID number, as well as for customers from non-EU countries. Nodpsyy Htdjfx Aibela Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to port available. All prices listed on classified ads are gross prices and already include 19% VAT.

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 210 NEW | Hydraulic steering – extendable | 36t payload | 3 axles | from €76,900 New vehicle – can be individually configured for your application. High payload with robust construction and maximum cost-effectiveness. Highlights: - Extendable loading platform with pneumatic locking - Numerous heavy-duty lashing points for maximum load securing - Hydro-mechanically forced-steered BPW axles with disc brakes - Air suspension with lift and lower function - WABCO EBS brake system in compliance with EU regulations - Mechanical JOST landing legs with 2-speed gearbox - LED lighting system - Tyre pressure monitoring system (TPMS) Construction & Durability: - High-strength fine-grain steel construction - Metallised chassis with premium corrosion protection - Multilayer paintwork with additional cavity sealing - Heavy-duty wooden floor in robust Omega profiles Included Options: - Convenient rear steering via cable remote control - Electro-hydraulic power pack - Galvanised front wall (approx. 1,200 mm) - EN 12642-XL body - 10 pairs of stake pockets for flexible load securing Njdoypaz Sjpfx Aibsla - Spare wheel holder under the loading area - Beacon holder - Reflective tape & European reflector plates - Air couplings at front Additional equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, New vehicle / Stock vehicle / Incoming unit? Also available as MEGA version / from €24,200.-- For sale is a Wielton Platform Master semi-trailer, designed for heavy-duty and flexible use in the transport of building materials, steel, and long goods. The vehicle is available in standard body height and optionally as a MEGA version. Note: The following equipment specification refers to a current stock or pre-ordered vehicle. Variations depending on the specific vehicle, production status, or individual customer configuration are possible. ----Chassis / Frame Frame as double longitudinal beam with welded cross members and outer frame * Welded construction made from high-strength S700 steel * Perforated outer frame with continuous lashing options * SAFETY LOCK system: approx. 60 lashing points per side * Designed for a fifth wheel height of 1,120 mm (MEGA version with reduced fifth wheel height optionally available) * 19 pairs of lashing rings, each 2.0 t, in the outer frame * 26 stanchion pockets, 81 × 81 mm, as per drawing * Work area according to ISO 1726:2003, weight-optimized construction ----Axles and Running Gear 3 axles, each with 9,000 kg load capacity * SAF axles with air suspension and disc brakes (ET120) * Brake discs Ø 430 mm * 1st axle as lift axle * 2" kingpin, fitting dimension 2,040 mm * 2 mechanical landing gears, SAF brand * Single-sided landing gear operation, right ----Chassis Accessories 2 plastic wheel chocks with holder * Extendable rear access ladder with large tread surface, compliant with accident prevention regulations (UVV) * Large rubber bump stops, laterally steel-reinforced, at rear frame * Side underrun protection to ECE R73 made of lightweight composite material * Rear underrun protection made of steel to ECE R58 * Full PVC mudguards * 2 PVC toolboxes, each 165 l * 12 plug-in stanchions, 80 × 80 mm, length 1.500 mm * 12 stanchion holders * Omission of spare wheel holder * Extendable widening panels ----Brake System / Pneumatics Brake system according to ECE regulations * Two-line compressed air brake system, WABCO brand, ADR-compliant * EBS system WABCO 2S/2M with RSS * Raise/lower facility * Brake line connectors at front of bulkhead * Standard air couplings according to ISO * Aluminum air tanks ----Lighting and Electrics Lighting support from composite material * Lighting system 24 V according to ECE R48, Aspöck EP III brand * 2 seven-chamber multifunction rear lights * LED license plate lighting * 2 LED outline marker lights * LED side marker lights * 2 × 7-pin + 1 × 15-pin at front including EBS socket (without connection lines) * Electrical installation and pre-wiring for revolving beacon * 2 additional LED reversing lights ----Wheels and Tires Tyres 6 × 385/65 R 22.5 * 6 × steel rims 11.75 × 22.5, ET120 * Premium tires BRIDGESTONE ECOPIA H002 M+S * Protective caps for wheel nuts ----Flooring Nsdpfjypa Aiox Aibsla 30 mm screen-printed plywood floor, multi-glued, slip- and waterproof; premium brand Koskisen * Sealed cut edges * Perimeter flooring joint * Forklift loadable up to 7,500 kg axle load ----Superstructure Front wall 1,800 mm high * Front wall and front corner stanchions made of natural aluminium ----Paintwork / Color details All steel elements double shot-blasted * KTL primer for optimal corrosion protection * Dust-free robotic topcoat * Frame: RAL 7021 black grey / anthracite * Landing gear: Black, powder-coated * Axles: Black * Rims: Silver * Wheel hubs: Black * Side underrun protection: White * Rear

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, WEB Trailer PRSH 27 NEW | Platform Semi-Trailer | Hardwood Floor | Container-Compatible | from €30,500!!! Nljdpfxsypa Ilo Aibea New vehicle – customizable to your application requirements. Robust platform semi-trailer with hardwood floor for versatile transport tasks. Suitable for container transport (20 ft / 40 ft) as well as general cargo and machinery transport. Highlights • Platform semi-trailer with 27 mm hardwood floor • Container-compatible: 1×40 ft / 1×20 ft center / 2×20 ft • Single tires R22.5 • High lashing forces – certified lashing points • Lift axle with starting aid • Durable WEB Trailer quality for daily use Technical Data • Chassis length: approx. 13,510 mm • Chassis width: approx. 2,540 mm • Unladen ride height: approx. 1,250 mm (with 1,120 mm fifth wheel height) • Max. kingpin load: approx. 16,000 kg • Axles: 3 × 9,000 kg, disc brakes • Axle spacing: 1,310 / 1,310 mm • Tires: 385/65 R22.5 Standard Equipment • Crossmembers IPE 80, spacing approx. 400 mm • Outer frame U-profile 160×120×5 mm • Lashing bars top & bottom every 1,200 mm, certified (5 t) • 8 pairs of stanchion pockets 80×50 mm • 6 pairs of container twist locks (ward plates) • Bulkhead 1,200 mm, sheet metal cladding • Holders for plug-in stanchions on the bulkhead • 24 t telescopic landing gears • EBS brake system • 1st axle as lift axle, automatic with starting aid • 24 V LED lighting system, 15-pin • Underrun protection rectangular tube • Rear access ladder with platform Floor & Cargo Securing • 27 mm hardwood floor in Omega profiles • Weatherproof floor for open platforms • Certified forklift axle load 9.0 t according to DIN EN 283 • Extensive lashing options for flexible cargo Included Options • Extendable red/white warning plates (rear & landing gears) • Large bent lamp bracket • Open tool box made of perforated sheet • License plate lighting & lane marker lights • Bulkhead color RAL 9006 silver • Chassis MB 7350 Nova Grey • KTL coating with zinc phosphating + powder Further equipment and individual customization available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, New vehicle / stock vehicle / inbound? Also individually configurable / from €29,900 -- For sale is a Wielton construction materials semi-trailer, designed for professional use in building materials and general cargo transport. Note: The equipment listed below describes a current stock or pre-ordered vehicle. Deviations depending on the specific vehicle, production status, or individual customer configuration are possible. ----Chassis Load floor made of 30 mm phenolic plywood, load capacity 7.5 t * Steel lamp bracket, 371 mm * 19 pairs of lashing rings, each 2.0 t * Rubber-steel rear impact buffers * Folding rear underrun protection * Rear underrun protection made of steel * Lateral underrun protection made of aluminum ----Axles and Suspension 3 axles, rigid version * SAF disc brake axles, 3 × 9,000 kg, 22.5" INTRADISC * 1st axle lifting axle * No lift axle on the 3rd axle Nlodpfxjypa A As Aibsa * Fifth wheel height approx. 1,120 mm ----Landing Gear SAF Hercules 2-speed landing gear, full-load ----Mudguards PVC mudguards, half shell, 2 front / 2 rear ----Rims 6 × steel rims 22.5 × 11.75, ET-120 * Wheel nut protection caps * Without spare wheel rim ----Tyres 6 × 385/65 R 22.5 according to manufacturer selection Options: * GOODYEAR KMAX G2 T M+S 3PMSF Roll resistance: B | Wet grip: C | Noise: 71 dB * BRIDGESTONE Ecopia H-TRAILER 002 M+S 3PMSF Roll resistance: A | Wet grip: B | Noise: 68 dB * Without spare tyre ----Other Chassis Equipment 2 × toolboxes, each 165 l * Spare wheel basket * Extendable width marker boards ----Superstructure Front wall H = 1,800 mm, galvanised splash plate up to top edge * Drop sides 1,000 mm * Bolt-on drop sides * Folding drop side at rear ----Braking System / Pneumatics WABCO braking system with basic modulator * RSS / RSP * Aluminium air tanks * RTR automatic self-levelling * Brake system WABCO or Knorr with H-S-valve ----Electrical System Full LED lighting Aspöck ECOLED II * Flashing side marker lights * 2 LED reversing lights * 2 × 7-pole + 1 × 15-pole, incl. EBS connection * Without connection cables to tractor unit ----Paintwork / Surfaces Frame hot-dip galvanized, unpainted * Side walls anodised, unpainted ----Additional Systems ABERG TPMS tyre pressure and temperature monitoring * Sensors on rims * Control unit connected to EBS * Developed for semi-trailers and trailers ----Marking Partial contour marking with Wielton logo * White on the sides, red at the rear * Wielton warning stickers * Vehicle labeling in German ----Further equipment and individual customizations available at any time – we will configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 37.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 200 NEW | extendable | 37t payload | 3 axles | from €57,000 New vehicle – customizable to your specific application. High payload with sturdy construction and maximum cost-effectiveness. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous heavy-duty lashing points for maximum load securing • BPW axles, air-suspended with disc brakes and lift/lower function • Self-tracking axles with electro-magnetic reverse lock • WABCO EBS brake system compliant with EU regulations • Robust steel construction with premium corrosion protection • LED lighting system • Mechanical JOST landing gear with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Construction & Design • High-strength fine-grained steel construction for long service life • Metallized chassis with additional cavity sealing • Multi-layer paint finish for optimum protection • Durable wooden floor mounted in sturdy omega profiles ----Included Options • Galvanized front wall (approx. 1,200 mm) • Spare wheel holder under the loading platform • 10 pairs of stake pockets for flexible load securing • EN 12642-XL body • Reflective tape & European reflector plates • Brackets for warning signs incl. socket Nsdpfxeypazxe Aibela • Beacon brackets • Air couplings at the front ----Further equipment and individual customizations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 30.250 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Krone Profi Liner (SDP 27 MEGA) _____ Details • Internal cargo length: 13,620 mm • Internal cargo width: 2,480 mm • Fifth wheel height: 980 mm • Multilock outer frame with universal load securing points every 100 mm _____ Axles/Tyres • BPW axles • Air suspension • Wheelbase: 1,310 mm • Disc brakes (370 mm diameter) • Wheel nuts with protective caps • 1st axle liftable • Tyre pressure monitoring system Nlsdpfx Aijn Hrtkjboa • KM counter _____ Attachments • Toolbox • 10 pairs of stake pockets (81 x 81 mm) on the external frame • 15 pairs of Multi Lash lashing rings • 10 stake pockets (81 x 81 mm) centrally in the floor • 12 insertable stakes, total length approx. 1,950 mm • 12 insertable stakes, total length approx. 1,950 mm • 30 mm thick, waterproof floor panels _____ Accessories • 2x wide load signs incl. marker lights • Stake holder on the left side for 12 insertable stakes _____ Lighting • Multifunctional rear lights (Hella) • 2x LED license plate illumination • LED side marker lamps with indicator function • Rotating beacon (orange) • incl. 1 reversing spotlight _____ Paintwork • Chassis: RAL 9005 - jet black • Rims: natural silver • Landing gears: RAL 9005 - jet black • Axles: RAL 9005 - jet black • Front wall: RAL 7035 - light grey

Stanje: rabljeno, največja dovoljena obremenitev: 15.250 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2007, ? Balastna platforma ? 50 mm vlečna kljuka Nledpfjw Sqi Ejx Aibea ? 5 x pritrdilna ušesa ? Bobnaste zavore ? Listnato vzmetenje ? Podporne noge ? BPW osi Vsi podatki brez garancije / vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 13.860 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 10 m³, Oprema: ABS, ? pocinkano podvozje ? nizko sklopljen ? vlečno oko 50 mm ? zaklep za kontejner Nledpfx Aoxb Ig Soibsa ? po 12 pritrdilnih obročev na vsaki strani ? vzvratna kamera ? bobnaste zavore ? duomatski priključek ? ABS ? zračno vzmetenje ? orodjarna ? EBS ? podporne noge ? dvojna kolesa ? BPW osi Vse informacije brez garancije / Vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 15.250 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/2008, ? Platform for ballast weights ? 50 mm towing eye ? 4 x lashing eyes ? Drum brake ? Leaf suspension ? Support legs ? BPW axles Njdpfjwfk R Djx Aibjla All information without guarantee / subject to prior sale.

Stanje: rabljeno, Ima TÜV in veljaven UVV. Izstavi se račun z vključenim DDV-jem. DDV je ločeno izkazan. Preda se le odjavljen. Njdpfxsy A Rate Aibjla

Stanje: rabljeno, največja dovoljena obremenitev: 29.550 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2014, dolžina tovornega prostora: 13.630 mm, širina tovornega prostora: 2.460 mm, Oprema: ABS, DVIGALNA OS, MULTILOCK Za več informacij pokličite: +420734511212 Njdpfx Ajydgzneibola

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, Oprema: ABS, 1. Technical Data * Maximum permissible fifth-wheel load: 12,000 kg * Maximum permissible axle load: 24,000 kg * Maximum permissible gross vehicle weight: 36,000 kg (technically up to 39,000 kg) * Technical information for registration and manufacturer’s plate included. 2. Chassis and Superstructure * Welded ladder-frame construction in modular design * Multi Lock outer frame for flexible load securing * Load compartment length: 13,620 mm, load width: 2,480 mm 3. Protection and Safety * Rear underrun protection and side guard in accordance with EU directive * Rear access ladder * Two mechanical landing legs, single-sided operation 4. Axles and Running Gear Nlsdpfx Asyz Et Ssibsa * 3 axles, each with 9,000 kg load capacity * KRONE axles with air suspension and disc brakes (430 mm diameter) * Lift and lowering device as well as automatic lift axle control * First axle designed as a lift axle 5. Wheels/Tyres * 6 units, 385/65 R 22.5, M+S tread (mud and snow) * Smart Tyre Monitoring and TPMS (telematics services available) * Wheel nuts with protective caps 6. Brakes & Electrics * Braking system in accordance with ECE regulation 13 including ABS and EBS system * Spring-loaded parking brake * Full-LED lighting, side marker lamps with indicator function, additional sockets 7. Floor & Interior * 30 mm thick, waterproof board floor, sealed * Rear portal through-loading height: 2,700 mm * Steel front wall with impact protection plate 8. Tarpaulin & Side Walls * PVC tarpaulin, sliding roof, reinforced and with tensioning device * White roof tarpaulin, contour markings on sides and rear 9. Other Equipment * Toolbox, pallet stop, warning plates, beverage transport certificate * Telematics Premium included for 24 months 10. Paintwork & Visual Appearance * Chassis deep black RAL 9005 * Rims silver natural * Side under-run protection white 11. Certificates * Load securing certificates according to EN 12642 XL and VDI 2700 Part 12 * EU Declaration of Conformity and Registration Certificate Part II

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Nlsdpfx Aijyz E T Ssbsa Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 750 mm, Leto izdelave: 2024, Oprema: ABS, ( sample images ) KRONE TRIDEC 3-axle Construction Material Semi-Trailer SDP 27/eLNZ4-BS / 750 mm sideboard height / TRIDEC Nlodeu S Tzbepfx Aibea Manufacturer: KRONE Initial registration: NEW VEHICLE Dimensions: 13,620 x 2,480 x 750 mm Gross vehicle weight: 36,000 kg Unladen weight: 7,019 kg Air suspension with lift/lower function, disc brakes, spare wheel holder, ABS, EBS, axle manufacturer: BPW ECO PLUS version 3 Lift axle, phenolic plywood floor, lashing rings, toolbox, exterior paint: black KTL, body paint: white Chassis paint: black KTL, 6 wheels, tyre condition: 100%, rear axle tyres: 385/55 R 22.5 4 pairs of drop sides with 750 mm height CONSTRUCTION MATERIAL SEMI-TRAILER with 29 stake pockets 81 x 81 mm, both central and on the outer frame + 12 steel stakes left on the frame 12 pairs of reinforced lashing holes each rated at 4 t 12 pairs of multi lash rings Multilock outer frame (usable with closed sideboard) Reinforced steel front wall 1600 mm high Fully automatic LIFT AXLE 15 + 2 x 7-pin socket at the front Toolbox / spare wheel holder BPW ECO PLUS VERSION 3 !!!!! TRIDEC FORCED STEERING SYSTEM (Rod and 2 x turntable) – suitable for all construction sites Wheelbase 1,310 / 2,050 mm All details are subject to change and without guarantee, prior sale reserved!! If you have any questions regarding this or other vehicles, please call us.