Müller Elektronik Gps Empfänger A 101 nakup rabljenega (57.408)

Stanje: rabljeno, največja dovoljena obremenitev: 6.800 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, prva registracija: 04/2026, Müller-Mitteltal KWH 9.9 ML Cable Transport Trailer with Diesel Engine * KWH 9.9 ML * Drum brake system EBS 2S/2M * BPW axles * Leaf suspension with parabolic springs * Spring-assisted square tube supports at the rear with base plate; safety locking pins for various support heights * Drawbar with 40 mm or 50 mm bolt-type towing eye (height adjustable) * Fixture for additional drawbar, mounted laterally on the towing device, right side in driving direction Kedpfx Abjy R Ipne Eslt * Chassis made of torsion-resistant square tubes and cross members * Plastic toolbox * LED lighting * Swivelling cable drum frame consisting of base frame, rotary bearings, and drum support arms * Drum support arm ends with tension lock for drum shaft securing * Locking of the swivelling cable drum frame to the chassis by means of a centrally positioned claw lock * Steel drum shaft 76 mm diameter with centering and rotating ends * For a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Hydraulic pull and push cylinders, motor-driven, with load-holding valve * Control valve with automatic neutral position and pressure relief valve * Hydraulic system connectors, hoses, and pipes in NW 13 * Required oil capacity approx. 10 liters * Drum drive motor-hydraulic with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed controller and brake for drum drive * Hydraulic pump unit driven by diesel engine with hand starter, 6.5 HP with gear pump (150 bar) * Pressure supply can be provided either by the truck hydraulics or the pump unit by changing connection lines * Weather protection cover, fully hot-galvanized without final paint coating * Tyres: 315/80 R22.5 Subject to prior sale and errors! Sale exclusively according to our General Terms and Conditions. Important Notice: Even though we carefully check every detail in our offers, errors may occur. Some mistakes may result from data transfer errors between the different platform providers. Therefore, all information is provided without guarantee and does not constitute a legal claim. Legal Disclaimer: This sales advertisement does not constitute an offer within the meaning of §145 BGB (German Civil Code). Rather, it provides information for contract initiation. The information provided is non-binding and does not represent warranted characteristics.

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, Nemška prikolica, * 30-tonska * Razširljiva do 3 metrov * Pritisne rampe * 50 mm vlečna zanka * Zračno vzmetenje Ksdpfey Trntex Ab Eolt Več informacij po telefonu pri Christianu Bredemeierju.

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering purposes on the 1st axle (operated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle by an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping operation (can be deactivated via control unit in the driver's cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinder * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flanged Towing Eye: * Drawbar with adjustable K80 ball hitch ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with raised tower for connection lines ----General attachments: * Support winch at the front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable protective grille for rear lights (not permitted under StVZO regulations and must be removed before driving on public roads) ----Chassis: Ksdpfoy Tr Hijx Ab Eelt * Chassis made of fine-grained steel ----Tipper Body: * 3-way tipper body made of steel (fixed front wall, continuous side walls - without center pillar -, right side wall swinging via central locking and foldable with drop side spring assist) * Left side wall foldable with drop side hydromatics * Rear wall swinging with automatic hook locking * 5 mm steel floor made of HARDOX-450 steel or equivalent ----Load securing: * On each side 4 x 3 t lashing rings recessed in the outer frame, UVV-compliant ----Paintwork: * Axles, air tank, support winch, flanged towing eye painted in a black tone * Tipper body painted in a customer-specified RAL color (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and, barring any delays, will be completed in calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start assist system for maneuvering on the 1st axle (controlled via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension when tipping (can be deactivated via control element in cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for tractors with 12V & 24V electrics * LED tail lights 12/24 V with galvanized protection box ----Drawbar / Flange towing eye: * Drawbar with K80 ball coupling, adjustable mm ----Coupling height: * Coupling height approx. 440 - 550 mm when loaded with raised tower for connecting lines ----General attachments: * Support winch in front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable tail light guard (not permitted under StVZO, must be removed before driving on public roads) ----Chassis: Kjdey Tr Hcopfx Ab Eslt * Chassis made of fine-grain steel ----Tipping body: * 3-way steel tipper body (fixed front wall, continuous side walls without center stanchions, right side wall swinging via central locking and foldable with side wall spring-assisted lift, left side wall foldable with hydraulic side wall system) * Tailgate swinging with automatic hook locking * 5 mm steel floor made from HARDOX-450 steel or equivalent ----Load securing: * Each side with 4 x 3 ton UVV lashing rings recessed in outer frame ----Painting: * Axles, air tanks, support winch, flange towing eye painted in black * Tipper body painted in a RAL color of your choice (no special or metallic colors, changeable up to approx. 6 weeks before completion) * Chassis, tail light guards hot-dip galvanized ----Information: * Sample images ----Delivery time: * Vehicle is still under construction and, assuming uninterrupted and steady production, will be completed in week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * NEW VEHICLE without first registration, * Now immediately available in RAL 7016 Anthracite, Enquiry number: 11653 * Gross weight: 11.9t, Payload: 8.77t * Reinforced and certified body according to EN 12642 XL, incl. load securing certificate * 6.27m x 2.47m x 0.4m steel side walls, laser-welded, drop-down with 2 spring assists * Front wall bolted, smooth sheet metal (hot-dip galvanized) * Rear wall: (hot-dip galvanized), stored in front of the ramps with empty holder behind front wall * Rear stakes bolted (hot-dip galvanized) Kjdpfx Absyxbdbe Eolt * 50mm thick softwood floor * 4 UVV lashing rings LC 6300daN, recessed in front and rear cross members * 10 UVV lashing brackets LC 3000daN, recessed in the existing hole pattern in the external frame * Ramps: one-piece with hot-dip galvanized grating, non-slip version * Fixture in front of front wall for retrofitting container locks * Plastic toolbox in front of the front wall * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 wheels), parabolic suspension * BPW axles with tyre pressure monitoring * EBS, 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40mm tow eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator function * 1 removable round LED warning beacon, including bracket and installation ---- * Trade-in possible * Financing available through our partners, with or without down payment/residual value, and various terms. Request a quote! ---- * Leasing example from our partner FM LeasingPartner: €485 per month net for 60 months, no down payment, zero final payment. Other terms with or without down payment/residual value possible. Ask us for a quote! We are an authorized MüllerMitteltal dealer! ---- * Our opening times: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours we are available by appointment * We speak German, English, Russian, Polish and French.

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way Tipper Trailer with Ramps * NEW VEHICLE * Now immediately available in RAL 9016 Traffic White * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 11654 * Remote diagnostic unit with display option in the truck via EBS signal * Side marker lights with indicator function * GVW: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, foldable, and removable, prepared for later retrofit of side extension panels * Lockable compartment under the tipping bridge for approach ramps * Incl. 1 pair of aluminium loading ramps, 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lash rings LC 5000daN at front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centrally positioned) * Excavator bucket rest made of hardwood * 2-step access in front of front wall (hot-dip galvanized) * Drawbar infinitely height-adjustable, hot-dip galvanized, towing eye 40mm * Wide tires 385/55R 19.5 (4 units), parabolic springs * Net hooks, rear stanchions bolted, hot-dip galvanized * Cables for the rear drop side * Plastic toolbox on the right side of the chassis frame * LED lighting system 12 + 24 Volt Kledpfx Abjyvxg Ij Eet * 2 LED reversing lights at the rear of the trailer * Hire purchase price: * e.g. €560 for 60 months with no down payment and no residual value. Offer from our financing partner "FM LeasingPartner." Other terms with/without residual value or down payment possible * Request your personal quote! * We are official Müller-Mitteltal sales partners * Delivery free to your site available with timely order! ----Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 We are also available by appointment outside of these hours We speak German, English, Polish, and French. WhatsApp

Stanje: rabljeno, lastna masa: 6.400 kg, največja dovoljena obremenitev: 23.600 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, dolžina tovornega prostora: 7.800 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 920 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v tranzitu / na poti, 3 osi, vrtljiva vlečna gred, listnato vzmetenje, ABS (protiblokirni sistem), pritrdilna ušesa, hidravlične rampe, zadnja opora, stranska aluminijasta zaščita, dvojna kolesa. Nadgradnja: 3-osna nizkopodna prikolica s hidravličnimi naletnimi rampami, pocinkane rampe, 3x 10t osi! Vsi podatki brez garancije, saj je vozilo v tranzitu! PODATKI O DODATNI OPREMI BREZ GARANCIJE, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Kodpfjy R Ekiex Ab Eelt

Stanje: rabljeno, največja dovoljena obremenitev: 39.500 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2010, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 9.345 mm, Leto izdelave: 2010, * Müller Mitteltal T50 Compact * Low-bed trailer * Ramps * Tires: see photos * 5 axles * Gigant axles * Permissible total weight: 50,000 kg * Unladen weight: 10,500 kg Kljdpjyzlyxefx Ab Eet * Payload: 39,500 kg * Air suspension * Immediately available * Subject to errors and prior sale Do you have any questions? Contact us for swift consultation—you're also welcome to reach out directly via WhatsApp: We offer: Net purchase for EU businesses with a valid VAT ID number, as well as for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to port. All prices on classified ads are gross and already include the statutory VAT of 19%.

Stanje: rabljeno, največja dovoljena obremenitev: 16.950 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2006, naslednji pregled (TÜV): 04/2026, Leto izdelave: 2006, * Müller Mitteltal T3 NG * Low-loader * Ramps * Twin tires * Permissible total weight: 24,000 kg Klsdpfx Asyv Ug Dsb Est * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tyres: see pictures * BPW axles * Immediately available * Subject to prior sale and errors excepted Do you have any questions? Contact us for prompt advice – also available directly via WhatsApp: We offer: Net purchase for companies within the EU with VAT ID number as well as for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed on classified ad platforms are gross prices and already include the statutory VAT of 19%.

Stanje: rabljeno, prva registracija: 07/2019, lastna masa: 3.290 kg, največja dovoljena obremenitev: 8.610 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 05/2027, barva: srebrn, vrsta prenosa: mehanski, vzmetenje: jeklo, skupna dolžina: 9.163 mm, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.450 mm, Oprema: ABS, Mehanske rampe. Nakladalna površina je dolga 7,00 m. Prikolica je razbremenjena na 10.000 kg. Kodpfoy Ta Ubjx Ab Eolt

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal T4 Low Loader Trailer * SAF axles with drum brakes * Twin tyres * Low bed with extendable loading platform * Hydraulic loading ramps, movable (2 units) * Drive-over gooseneck * Additional rear supports * Turntable construction ----Dimensions & loading area * Loading area approx. 9,800 mm * Loading width: 2,550 - 3,000 mm * Loading height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892----Subject to errors and prior sale----Advertising and various lettering have been digitally removed. -----We are happy to assist you with any formalities arising from the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other things, we can offer you the following services at an additional cost: ----Trade-in of your old vehicle TÜV/general inspection Kjdpey Skl Iefx Ab Ejlt Complete export processing Financing brokerage Obtaining export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----Your VTS Team

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on bulkhead ----Electrics / Lighting: * TPMS Tire Pressure Monitoring System * LED lighting ----Loading Platform: * Loading length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Hinged, trapezoidal-profile steel side panels with drop-side spring assist * Removable steel rear wall, can be stowed in front of the bulkhead between ramp mounts * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the bulkhead and end beam for 1.2 t lashing options Kodpfoq Ra D Eex Ab Eslt ----Ramps: * One-piece mechanical drive-up ramps with spring mechanism, single-operator use, approx. 2,750 x 600 mm (collapsible down to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stanchions, and drive-up ramps * Side panels painted in RAL 9010 pure white * Painting of side walls in an individual RAL color available for a surcharge ----Information: * Subject to errors and prior sale * New vehicle with manufacturer warranty ----Delivery time: * Available from CW

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: 3-in-1: Suitable for hooklift containers, skip containers, and as a low loader ----Brakes: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 tonne axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display on truck via EBS signal (no truck-side installation required) * LED rear lights 12/24V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel * Spare wheel carrier basket, right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Folding A-board at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer rails to guide roll-off containers * Steel floor with roller recesses in the bogie area * For hooklift container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical plug-in stop angles at the front of the track * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip locators for lateral centering of the skips, front 4 locators plug-in with swinging stop * Weld seam as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for hooking in securing elements for positive and non-positive locking of skips, 4 cloverleaf-type lashing bars per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes per side flush-mounted in the outer frame Kledpsl Tld Iofx Ab Est ----Ramps: * Aluminium approach ramps (10.6 t per pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Type Towing Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights Klodpfstr Sucox Ab Eot ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of fine-grain steel ----Tipper Platform: * Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall * Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting * Rear stanchions bolted * Steel rear wall slid in front of the ramps * Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm floor made of fine-grain steel ----Ramps: * Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tanks, towing eye, and landing gear painted in black * Sidewalls and platform in RAL 9010 pure white * Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from calendar week 07/2026

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders Ksdstr St Uopfx Ab Eolt * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Type Towing Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of fine-grain steel ----Tipper Platform: * Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall * Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting * Rear stanchions bolted * Steel rear wall slid in front of the ramps * Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm floor made of fine-grain steel ----Ramps: * Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tanks, towing eye, and landing gear painted in black * Sidewalls and platform in RAL 9010 pure white * Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from calendar week 07/2026

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: Ksdpfsrvvfwex Ab Ejlt * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flanged Drawbar Eye: * Height-adjustable drawbar by 300 mm * 40 mm flanged drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding rear supports * Plastic quarter mudguards * Plastic toolbox mounted front right on the bulkhead ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Area: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal profile steel, foldable with drop side spring lifter * Steel tailgate, insertable between ramp holders; stowable inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Each front and rear corner fitted with 1 x 6.3 t lashing point * Various holes in bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm height) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paint Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, tailgate, rear stanchions, and ramps * Sideboard paint finish in RAL 9010 pure white * Painting of side walls in another RAL color possible at extra cost ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Availability: * Available from CW (calendar week)

Stanje: rabljeno, največja dovoljena obremenitev: 6.000 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, prva registracija: 04/2026, Oprema: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer Kodpfxjy R Hx Us Ab Ejlt * LIKE NEW and available * Reference for inquiries: 11652 * TPMS Tire Pressure Monitoring System * EBS brake system, drum brake, BPW axle, parabolic springs * Support winch at front, spring-assisted square tube supports at rear with base plate, safety locking pins for multiple support heights * Drawbar with 40 mm towing eye (height-adjustable in mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tyres, solid steel fenders * Swivel-mounted cable reel assembly * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of step-tapered polyamide centering cones * For reel diameters Ø 800–3,000 mm x (1,700 mm width between reel arms) * With clamp lock for securing the reel at the end of load arms and central claw lock for securing the cable reel assembly to the chassis * Motor-hydraulic, actuated pull and push cylinders with pipe rupture protection. Control valve with auto-centering neutral position, pressure relief valve, and lowering throttle. NW 13 hydraulic system connectors, hoses, and pipes included. * Hydraulically driven reel motor with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for reel drive. * Includes hydraulic pump unit – Hatz 1B30 Silent diesel engine with hand starter, 6.5 HP (150 bar), pressure supply selectable via connection change: truck hydraulics or pump unit * Toolbox approx. 500 x 350 x 400 mm * Hot-dip galvanized chassis with drawbar * Advert space integrated in side guard, exterior polyester-coated in RAL white * ----like-new condition (only used for one project) * ---- * Financing available from our partner banks with or without down payment, balloon payment and different terms possible. Ask us for a quote! * We are an official Müller Mitteltal trading partner! * Lease-purchase example from our partner FM LeasingPartner: starting from just €595/month net, 60 months term (no down payment, €0 final payment). * Ask us for a quote! ---- * Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside business hours, appointments by arrangement * Languages spoken: German, English, Russian, Polish, French ----

Stanje: rabljeno, največja dovoljena obremenitev: 6.940 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2018, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 5.360 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 350 mm, skupna širina: 2.550 mm, Oprema: ABS, Equipment: Ksdpfx Abjy Si Ets Eelt * 40 mm jaw coupling * height-adjustable towing eye * drop-down side panels * storage box * removable tailgate * towing eyes * BPW axles * galvanized Other information: * 1 previous owner * German first delivery * Downrated from 11.9 t to 10.0 t without technical modification Since 1972, your reliable partner for all things automotive and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly stocks around 200 vehicles from the fields of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing solutions at favourable special rates. If you are interested, we will be happy to provide you with an individual quote! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, on price tags and in images are non-binding descriptions and do not constitute guaranteed features. The seller accepts no liability or warranty for typographical or data transmission errors. Listed equipment must be checked separately if necessary. Subject to errors and prior sale.

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: Klsdpfoq Euakox Ab Eet * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Kedstpta Dopfx Ab Eolt Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: rabljeno, največja dovoljena obremenitev: 30.700 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2002, Oprema: ABS, * MüllerMitteltal nizkopodni priklopnik s 4 osmi T40 * 2x krmiljeni vrtljivi osi Kedeyuri Eepfx Ab Eelt * Nemška prikolica * pero * hidravlično pomične rampe / levo-desno * deljene preklopne rampe * možnost razširitve * ABS * BPW osi * 40 t * lastna teža: 9300 kg * osne obremenitve = 10 t na os * popolnoma funkcionalen * pnevmatike v redu

Stanje: rabljeno, največja dovoljena obremenitev: 13.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2008, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 850 mm, prostornina tovornega prostora: 10 m³, skupna širina: 2.550 mm, skupna višina: 2.580 mm, Leto izdelave: 2008, Oprema: ABS, Müller-Mitteltal Three-Sided Tipper 2-Axle Tandem Trailer VIN: 051973 Chassis / Attachments: * Air suspension * 2 x BPW Eco Plus axles with drum brakes * Tyres: 385/65 R 22.5 * Remaining tyre tread: front approx. 20/80%, rear approx. 30/80% * Fixed underrun protection * Drawbar with 50 mm towing eye * 1 x Jost support leg on drawbar Body: * Müller-Mitteltal three-way tipper body * 850 mm aluminium side walls * Front wall and tailgate 960 mm * Approx. 10 m³ * Pallet-wide Weights: * Gross weight 18,000 kg * Payload 13,900 kg * Unladen weight 4,100 kg Miscellaneous: * German registration * SP 03 / 2027 * 1 previous owner New general inspections / safety checks or adjustments to gross weights (down- or upgrading) are possible on request. We are happy to assist with export/temporary licence plates, as well as the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm, you will find a wide range of vehicles. Our company philosophy is characterised by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who accompanies them in the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Ksdpfxey H Tryj Ab Eslt Organisation of special transports We support you in organising special transports. Day registration / Export licence plates We can arrange export or temporary number plates for you. Handling customs formalities We are pleased to assist you with customs matters.

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs – 110 mm wide – with tandem equalizer unit ----Drawbar / Drawbar Eye: Drawbar with 50 mm flanged towing eye and height-adjustable drawbar ----Electrical / Lighting: * 15-pin power connector * LED taillights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Lateral underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead panel, smooth sheet metal * Side walls made of trapezoidal profiled steel sheet, foldable with board-wall spring assist * Steel rear wall insertable between the ramps, with internal storage in the front when not in use Ksdpel Th Hwjfx Ab Eolt * Bolted rear stanchions ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Optional installation of 3 t fold-down lashing rings every 600 mm * 1 x 10 t lashing ring in each front and rear corner; multiple holes in the front and rear crossmembers for 1.2 t lashing options * Profifix lashing rail centrally along the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear access slope approx. 860 mm ----Paintwork: * Chassis, drawbar, bulkhead, rear wall, drive-on ramps, and folding supports hot-dip galvanized * Sideboard painting in RAL 9010 pure white * Optional painting of the side walls in a RAL colour for an additional charge * Axles, springs, air tank, flanged towing eye, and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available approx. from calendar week 21/2026

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: Klodpepk D D Hsfx Ab Eet * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted on the right side of the chassis at the front * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking locations and 2 on the front wall ----Chassis: * High-tensile steel chassis ----Tipping Platform: * Steel pallet-type three-way tipper body with continuous side walls, upper inside pipe reinforcement, no central stanchions; drop-down with drop side spring assistance * Bolt-on rear stanchions * Combination steel swing doors on the rear wall, 2-leaf, asymmetrically split, can swing and lock 270°, not drop-down, with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation for auto rear wall function when tipping backwards with door open * 4 mm fine-grained steel floor plate * Rear mounting rails for loading ramps Kledpfol Th Htex Ab Ejt ----Load Securing: * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side recessed into the external frame ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,570 x 410 mm (load capacity: 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis for the ramps ----Tyres: * Tyres 285/70 R19.5 ----Painting: * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air tanks and support winch painted black * Drop sides painted RAL 9010 pure white * Other RAL-coloured side wall painting available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (not previously in use) * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf