Dms Sg2030 Inkl. Rotator Sortiergreifer / Neu / Lagern nakup rabljenega (6.426)

Stanje: novo, Leto izdelave: 2024, dolžina zabojnika: 8 čevelj, barva: modra, lastna masa: 630 kg, prostornina tovornega prostora: 9,82 m³, širina tovornega prostora: 2.106 mm, dolžina tovornega prostora: 2.275 mm, višina nakladalnega prostora: 2.050 mm, ✔ SEA AND STORAGE CONTAINERS – all sizes & types, NEW & USED – Direct from the specialist! Nationwide transport within Germany (unloading not included) is already included in the stated price. Container Dimensions: - External dimensions (LxWxH): 2,438 x 2,200 x 2,260 mm - Internal dimensions (LxWxH): 2,275 x 2,106 x 2,050 mm - Door opening (WxH): 2,070 mm x 1,945 mm - Tare weight: 630 kg - Loading volume: 9.82 m³ - Forklift pocket spacing (center-to-center): 950 mm - Clear forklift pocket dimensions (WxH): 355 x 105 mm Load Ratings: - Max. payload: 3,500 kg - Max. floor load: 750 kg/m² - Max. lifting payload at 1.5g: 2,300 kg - Max. stacking weight: 6,500 kg - Max. point load (roof center, 30x30cm): 150 kg - Stackable: up to 3 empty units Corner Castings: - Welded container corners, external dimensions according to ISO standard, thickness 6 mm Roof: Frame construction: - Welded steel profiles, 2.5 or 3 mm thick - Weather lip on front roof beam Covering: - Self-supporting, corrugated steel sheet, 1.2 mm thick Corner Posts: - Front corner posts: 3 mm steel profile - Rear corner posts: 2 mm steel profile Walls: - Vertically corrugated steel sheet, 1.2 mm thick - 4 forced ventilation openings below the roof frame Floor: Frame construction: - Welded steel profiles, 2 to 3 mm thick transverse beams made from U-profiles Forklift pockets: - Steel profiles, 2.5 mm thick Wooden floor: - Coated laminated plywood, 21 mm thick - Water-resistant - Sealed with elastic sealing compound Rcedpfxevf H Hce Ah Heb Doors: - Double-leaf door, with all-round special rubber seal - Opening angle approx. 270° Cladding: - Horizontally corrugated steel sheet, 1.2 mm thick Locking: - Special locking mechanisms - Made from galvanized tube and retaining angles, with integrated plastic slide bushings Hinges: - Welded onto door leaf using galvanized and forged hinges Painting: - Eco-friendly, multi-layer coating system with high weather resistance Surface preparation: - Degreasing and zinc phosphating by immersion Primer: - Cathodic dip coating, average thickness 20 µm Top coat (exterior): - High-quality polyester powder coating, av. thickness 70 µm - Interior colour: RAL7035 Light Grey Options: - Paintwork according to CTX-RAL chart - Steel checker plate floor 3 + 1 mm - CTX anti-theft protection - Security package - Electrical installation - 2nd double-leaf door on front side - Sectional door - Window (incl. window grilles) - Personnel door 875 x 2,125 mm - Shelving - Air vent grilles CONTAINER APPLICATIONS: - Additional storage capacity - Material and tool storage - Temporary moving storage - Workshops - Technical rooms and much more. OUR SERVICES: - Container sales: all sizes and types / new and used - Europe-wide delivery by truck / side loader / rail / inland vessel - International forwarding by sea freight - Container repair - Container modification - Container accessories and spare parts All prices are plus VAT. We would be pleased to hear from you. If you have any questions, please do not hesitate to contact us. # Container trade sea containers storage containers overseas containers high cube containers material containers magazine containers site containers construction containers steel containers bar containers kiosk containers workshop containers event containers moving containers archive containers

Stanje: rabljeno, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, barva: črn, lastna masa: 195 kg, prva registracija: 01/2019, Leto izdelave: 2019, voznikova kabina: drugo, Lokacija vozila: Bovenden, DMS sortirna grabilka SG6040 vključno z vrtljivo glavo in MS03 nastavkom! Teža brez rotatorja cca 195 kg! Dobro stanje! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake so pridržane! Rcsdpfexy Sxiex Ah Hsb

Stanje: novo, Leto izdelave: 2024, dolžina zabojnika: 10 čevelj, barva: modra, lastna masa: 825 kg, prostornina tovornega prostora: 15,76 m³, širina tovornega prostora: 2.344 mm, dolžina tovornega prostora: 2.831 mm, višina nakladalnega prostora: 2.376 mm, ✔ STORAGE CONTAINERS OF ALL SIZES & TYPES, NEW & USED – DIRECT FROM THE SPECIALIST! Transport within Germany, excluding unloading, is already included in the listed price. Container Specifications: - External dimensions (LxWxH): 2,991 x 2,438 x 2,591 mm - Internal dimensions (LxWxH): 2,831 x 2,344 x 2,376 mm - Door opening (WxH): 2,310 mm x 2,280 mm - Tare weight: 825 kg - Capacity: 15.76 m³ - Fork pocket spacing (center to center): 950 mm - Clearance (WxH): 355x105 mm Load Capacity: - Max. payload: 10,000 kg - Max. point floor load: 1,500 kg/m² - Max. lifting payload at 1.5g: 3,350 kg - Max. stacking weight: 9,500 kg - Max. roof center point load (30x30cm): 150 kg - Stackable: Up to 3 units empty Corner Castings: - Welded container corners, external dimensions according to ISO standard, 6 mm thick Roof: Frame construction: - Welded steel profiles, 2.5 and 3 mm thick - Weather lip on the front roof beam Covering: - Self-supporting, cross-corrugated steel sheet, 1.2 mm thick Corner Posts: - Front corner post: 3 mm thick steel profile - Rear corner post: 2 mm thick steel profile Walls: - Vertically corrugated steel sheet, 1.2 mm thick - 4 forced ventilation openings arranged under the roof frame Floor: Frame construction: - Welded steel profiles, 2 to 3 mm thick, transverse floor beams in U-profile Rcedpfx Asvf Hrfsh Heb Fork pockets: - Steel profiles, 2.5 mm thick Wooden floor: - Coated plywood panels, 21 mm thick - Water-resistant - Sealed with elastic sealing compound Doors: - Double-wing door with all-round special rubber seal - Opening radius approx. 270° Cladding: - Horizontally corrugated steel sheet, 1.2 mm thick Locking: - Special locking mechanisms made from galvanized tubing and holding brackets, with integrated plastic sliding bushings Fastening: - Hinges galvanized and forged, welded to the door leaf Paintwork: - Environmentally friendly combined coating system with high weather resistance Pre-treatment: - Degreasing and zinc phosphating via immersion process Primer: - Cathodic dip coating, average layer thickness 20 µm Top coat (outside): - High-quality polyester-based powder coating, average layer thickness 70 µm - Interior color: RAL7035 Light Grey Options: - Paint as per CTX-RAL chart - Floor: checkered steel plate 3+1 mm - CTX anti-burglary protection - Security package - Electrical installation - Second double-wing door at end face - Sectional door - Window (incl. window grille) - Personnel door 875 x 2,125 mm - Shelving - Ventilation grille CONTAINER APPLICATION AREAS: - Additional storage capacity - Material and tool storage - Temporary storage for relocations - Workshops - Technical rooms - And much more OUR SERVICES: - Container sales: all sizes and types / new and used - Europe-wide delivery by truck / sideloader / rail / inland vessel - International freight forwarding by sea - Container repair - Container modification - Container accessories and spare parts All prices are exclusive of VAT. We look forward to hearing from you. If you have any questions, please do not hesitate to contact us.

Stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden (by phone) will be happy to assist you. DMS RL100140 Rotating Bucket / incl. Rotator / MS08 Mount / NEW equipment / in stock & immediately available Price: €8,090.00 net / €9,627.10 gross - Weight: 305 kg - Cutting width: 1,400 mm - Capacity: 400 l - Max. output speed: 10 – 11 rpm - Max. torque: 8,460 Nm - Recommended hydraulic flow for rotation: 50 – 60 l/min - Max. operating pressure for rotation: 210 bar - Excavator class: 7 – 10 t Optional: - MS03 Mount: €560.00 net - MS08 Mount: €890.00 net We have a very large selection of various DMS products in stock and available for immediate delivery! Mr. Herden (phone) is happy to assist you. Upon request, we are also pleased to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. Rcsdeyhympspfx Ah Hjb We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and prior sale excepted. = Additional Information = New: Yes Intended use: Construction Unladen weight: 305 kg Contact Marius Herden for further information.

Stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden (by phone) will be pleased to assist you. DMS RL40100 Rotary Bucket / incl. Rotator / MS03 Coupler / NEW equipment / in stock & available immediately Price: €5,190.00 net / €6,176.10 gross - Weight: 115 kg - Cutting width: 1,000 mm - Volume: 155 l - Max. output speed: 11 – 12 rpm - Max. torque: 1,337 Nm - Recommended flow for rotation: 16 – 20 l/min - Max. operating pressure for rotation: 210 bar - Excavator class: 2.5 – 4.0 t Optional: - MS03 Coupler: €560.00 net We have a wide range of various DMS products in stock and available for immediate delivery! Mr. Herden (phone) will be happy to assist you. On request, we would also be glad to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. Rjdpfx Ahoyhymvj Hecb We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We can supply you with the full range of DMS products! Subject to prior sale and errors! = More information = Condition: New Application: Construction Unladen weight: 115 kg For further information, please contact Marius Herden.

Stanje: rabljeno, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone at ...). DMS RL2590 Rotary Bucket / incl. rotator / MS01 adapter / NEW product / in stock & available immediately Price: €4,190.00 net / €4,986.10 gross - Weight: 101 kg - Cutting width: 900 mm - Volume: 100 l - Max. output speed: 9 – 10 rpm - Max. torque: 1,337 Nm - Recommended oil flow (rotation): 12 – 16 l/min Rcedoyhymijpfx Ah Hsb - Max. operating pressure (rotation): 210 bar - Excavator class: 1 - 2.5 t Optional: - MS01 adapter: €330.00 net - MS03 adapter: €560.00 net We have a very large selection of various DMS products in stock and immediately available! Mr. Herden (tel. ...) will be happy to assist you. On request, we will be pleased to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni Telehandler sales and service partner. We are an official JCB Construction Equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and prior sale excepted! = Additional information = Condition: New Application: Construction Unladen weight: 101 kg Please contact Marius Herden for further information.

Stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). DMS RL70120 Rotary Bucket / incl. Rotator / MS03 Coupling / NEW equipment / in stock & immediately available Price: €6,990.00 net / €8,318.10 gross - Weight: 217 kg - Cutting width: 1,200 mm - Capacity: 220 l - max. output speed: 9–10 rpm - max. torque: 6,960 Nm - recommended flow rate (rotation): 35–45 l/min - max. operating pressure (rotation): 210 bar Rcedsyxadaspfx Ah Hob - Excavator class: 4–7 t Optional: - MS03 Coupling: €560.00 net - MS08 Coupling: €890.00 net We have a very large selection of various DMS products in stock—ready for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. Upon request, we are also pleased to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We can supply the full DMS range for you! Subject to errors and prior sale. = More information = New: Yes Application: Construction Unladen weight: 217 kg Please contact Marius Herden for further information.

Stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden is at your service (by phone). Westtech Woodcracker CS545 Compact Grapple Saw / incl. Endless Rotating Tiltator / NEW device / in stock & immediately available Cutting diameter (mm): 540 Grapple opening (mm): 1,270 Own weight (basic – fully equipped) (kg): 610 – 780 Recommended main circuit flow rate (l/min): 50 – 100 Recommended auxiliary circuit flow rate (l/min): 35 – 50 Recommended operating pressure (bar): 200 – 250 Carrier vehicle operating weight (t): 8 – 15 Equipment: - Incl. endlessly rotating tiltator - Incl. automatic tiltator lubrication system We stock a wide range of adaptor plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.)—available immediately. Our warehouse holds a very large selection of different Westtech products, all available for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing options available upon request. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the entire Westtech Woodcracker range for you! Errors and prior sale excepted! = More information = Rodpfx Ahjyi R Ato Hjcb Condition: New Suitable application: Forestry Please contact Marius Herden for further information.

Stanje: novo, For inquiries regarding the adapter plate, Mr. Herden is happy to assist you (by phone: ...). OilQuick OQ80 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,990.00 net / €5,938.10 gross Drawing of the hole pattern available in the photos. - 2x 1/2" connectors - 1x 3/4" poly connector - 1x 3/4" connector - 2x 1" connectors - Excavator class: 25 to – 43 to - Weight: 386 kg Suitable for a wide range of attachments such as hydraulic breakers, sorting grabs, and compatible with the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires drain line) - Westtech CS580 (requires drain line) - Westtech CS780 (requires drain line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products also in stock and immediately available! We have a wide selection of additional OilQuick adapter plates in our warehouse—ready for immediate delivery! Mr. Herden (phone: ...) is happy to assist you. Rcsdoy E Et Hepfx Ah Heb If desired, we are also able to provide you with a financing offer. We are an official OilQuick distributor and service partner. We are an official Holp distributor and service partner. We are an official Gierking GMT distributor and service partner. We are an official Weber MT distributor and service partner. We are an official Westtech distributor and service partner. We are an official DMS distributor and service partner. We are an official Seppi M. distributor and service partner. We are an official Magni telehandler distributor and service partner. We are an official JCB construction machinery distributor and service partner. We are an official Mercedes-Benz distributor and service partner. We are an official Iveco distributor and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete OilQuick product range for you! Errors and prior sale excepted. = Further information = Application: Construction Unladen weight: 386 kg Contact Marius Herden for further information.

Stanje: novo, delovna širina: 2.300 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Greentec RM 232 Hedge Mulcher / incl. MS08 Adapter Plate / NEW machine / in stock & immediately available Price: €14,590.00 net / €17,362.10 gross - Working width: 2,300 mm - Number of rotors: 4 units - Number of blades per rotor: 6 units - Max. cutting diameter: 4 cm Rodpfx Aey E Etteh Hscb - Working speed up to: 4 km/h - Required hydraulic connections: 1 x double-acting + 1 x return line (drain oil) - Minimum oil flow: 50 l/min at 180 bar - Weight: 310 kg Delivery without hydraulic hoses and flow divider! Key features: High capacity – Maintain large hedges in no time Unique cutting system – Cuts and shreds branches in one pass Very long service life – Constructed using high-strength steel components The Greentec RM 232 branch cutter is designed for professional use by municipalities, farmers, and contractors. The machine offers a large working width and high operational speed, providing outstanding capacity. Branches are cut and shredded in a single pass. The processed material drops gently onto the ground for decomposition to begin. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We offer a very wide selection of various Greentec products, all in stock for immediate delivery! Mr. Herden (phone) will gladly assist you. Upon request, we can also provide a financing offer. We are the official sales and service partner for: - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Errors and prior sale excepted! = More information = Please contact Marius Herden for further details.

Stanje: novo, For inquiries regarding attachments, Mr. Herden will be happy to assist you (by phone: ...). Kinshofer Clamshell Bucket / Two-Shell Grab / Grapple / KM 604 - 350 / NEW Price: €5,300.00 net / €6,307.00 gross Capacity (liters): 350 Width E (mm): 650 Maximum opening (mm): 1,390 Number of teeth: 5 Weight (kg): 240 Closing force (kN): 20 Load capacity (kg): 3,000 - Including bolt-on excavator teeth - Including KM 04 F rotator motor Operating pressure: 26–32 MPa (260–320 bar) at 40 – max. 75 l/min The KM 604 is a practical two-shell grab for daily use – robust, functional, and cost-effective. - Maximum loading height due to compact design with horizontally mounted cylinder. - Long service life thanks to use of knife-edged material with Brinell hardness 500 HB and generously dimensioned bearings. - Synchronized shell movement due to robust, forged compensation linkage. - Bolt-on excavator teeth included as standard. - Excellent digging performance due to high closing force (20 kN at 26 MPa operating pressure). We have a very large selection of various attachments in stock, ready for immediate delivery! Mr. Herden (phone: ...) will be happy to assist you. Financing offers available on request. Rodpfx Ahsyi Rz Nj Hscb We are official distribution and service partners for: - Magni telehandlers - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealerships in Germany. Errors and prior sale excepted! = More Information = Intended use: Construction Contact Marius Herden for further information.

Stanje: novo, delovna širina: 105.000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. H3 105 Mulcher / NEW / In stock & immediately available Price: €6,490.00 net / €7,723.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes - Compatible with various adapter plates - Floating mount (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the carrier unit's flow rate - Housing made from wear-resistant AR400 steel - Front guard with chains - Rear guard made of rubber - Reinforced support roller with double-taper roller bearing, height adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pieces, part no. 150.02.041 Redjyix Hmepfx Ah Hecb OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and DRAIN SAFE TM motor safety valve to protect the motor in case of improper use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 35 - 60 Optional: MS03 adapter plate including bolts and installation = €530.00 net Requires 3 hydraulic lines: pressure, return, and leakage oil. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. We have a wide selection of different Seppi M. products available in stock! Mr. Herden (phone ...) is happy to assist you. Financing options are available on request. We are an official distribution and service partner for: - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Equipment - Mercedes-Benz - Iveco Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further information.

Stanje: novo, delovna širina: 125.000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. floating attachment / NEW machine / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - Suitable for excavators from 5 to 15 tons - Universal interface for mounting various adapter plates - S420: Double-walled housing made from high-strength S420 steel - WEARPLATE: Housing with replaceable wear plates - LOW PROFILE: Low-profile design - Indirect belt drive with 4 V-belts - Drive designed for hydraulic motor, depending on the oil supply of the carrier machine - 4D ROLLER: Reinforced support roller, 152 mm Ø, with double conical roller bearings, height-adjustable - COUNTER CUTTERS: Two rows of interchangeable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29–58 - Required hydraulic pressure in bar (min-max): 100–300 - Required oil flow in l/min (min-max): 55–150 OPT 099 Floating Attachment (Parallelogram link) OPT 555 Pendulum Adapter 3 hydraulic lines required: pressure, return, and drain line. Rcodpfsyix Hajx Ah Hob Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very wide selection of different Seppi M. products in our warehouse, ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing options available upon request. We are an official sales and service partner for Westtech, OilQuick, Holp, Magni telehandlers, DMS, Gierking GMT, Weber MT, Seppi M., JCB construction equipment, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden (by phone) will be happy to assist you. Westtech Woodcracker CL140 Felling Grapple / NEW unit / in stock & immediately available - Softwood cutting diameter (mm): 180 - Hardwood cutting diameter (mm): 150 - Grapple opening (mm): 440 - Own weight (basic – fully equipped) (kg): 110 - Recommended oil flow main circuit (l/min.): 20 – 60 - Recommended operating pressure (bar): 200 - Carrier vehicle service weight (t): 1 – 4 We stock a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) that are immediately available. Our warehouse holds a very large selection of different Westtech products that are readily available! Mr. Herden (by phone) will be happy to assist you. On request, we will also gladly provide you with a financing offer. We are an official distribution and service partner for Westtech. We are an official distribution and service partner for OilQuick. We are an official distribution and service partner for Holp. We are an official distribution and service partner for Magni telescopic handlers. We are an official distribution and service partner for DMS. We are an official distribution and service partner for Gierking GMT. We are an official distribution and service partner for Weber MT. We are an official distribution and service partner for Seppi M. We are an official distribution and service partner for JCB construction machinery. We are an official distribution and service partner for Mercedes-Benz. We are an official distribution and service partner for Iveco. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Subject to prior sale and errors excepted! Rcsdpoyxvhnofx Ah Hsb = Further information = New: Yes Unladen weight: 110 kg Part suitable for: Forestry applications Please contact Marius Herden for further information.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 19 kW (25,83 KM), vrsta goriva: dizel, lastna masa: 2.850 kg, stanje verige: 95 odstotek, število sedežev: 1, prva registracija: 02/2024, Leto izdelave: 2023, obratovalne ure: 230 h, Oprema: UVV varnostni pregled, dodatne luči, gumene gosenice, hidravlika, hidravlično kladivo, kabina, standardna žlica, Perkins diesel engine (18.4 kW / 25 HP / Stage V emissions) Rcodpfx Aeuggkfjh Hob Hammer, shear, and tilt bucket hydraulics (electro-proportional) Bucket/grab changeover valve Selector valve for single-acting (hammer) or double-acting function Dipperstick length: 1,300 mm LED work lights Radio preparation Heating Mechanical quick coupler, Type 03 Lehnhoff system 1 standard digging bucket of your choice Weight approx. 2,850 kg JCB manufacturer's warranty until 09/2026

Stanje: rabljeno, For inquiries regarding this vibratory plate, please contact Mr. Herden (by phone) for assistance. WEBER CR 9 Hatz Diesel Vibratory Plate Compactor / New machine / In stock & immediately available. Sales price: €12,590.00 net / €14,982.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series excel with powerful compaction performance and utmost efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced running qualities, high smoothness, and low hand-arm vibrations ensure maximum operator comfort. CR 9 – The new top class: powerful, robust, reliable: - Precise, stepless, electro-hydraulic switching between forward and reverse via tip control - Throttle cable and hydraulic switching lines routed securely inside the guide handle - Low hand-arm vibrations - Fatigue-free operation with height-adjustable steering handle - Protection for machine and engine through protective frame and full engine cover - Reduced maintenance due to the self-tensioning centrifugal clutch - Easy servicing – all maintenance components are easily accessible - Safe and quick loading via large, foldable lifting eye - Secure lashing for transport thanks to additional lashing points on the engine console - Enhanced operating comfort due to electric start with hour meter, engine oil, and battery voltage monitoring - Applications: road and civil engineering, trench construction, landscaping, sub-base for paving, setting of paving stones, compaction of sand, gravel, or crushed stone Redpfxsym I Ibj Ah Hocb - With engine protection Technical Data Engine: Hatz Diesel Max. engine output: 11.2 (15.3) kW/HP Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Financing options available upon request. We are an official sales and service partner for Westtech. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted. = More information = New: Yes Engine make: Hatz For further information, please contact Marius Herden.

Stanje: rabljeno, For inquiries about the vibratory plate, Mr. Herden will assist you (by phone). WEBER CR 9 Hatz Diesel Reversible Plate Compactor / New Machine / In Stock & Immediately Available Sales price: €11,590.00 net / €13,792.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out with strong compaction performance and highest efficiency. They are therefore the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced operating characteristics, high smoothness, and low hand-arm vibrations ensure exceptional operator comfort. CR 9 – The new top class: powerful, robust, and reliable: - Precise, infinitely variable electro-hydraulic changeover of forward and reverse via tip-switch - Throttle and hydraulic changeover housed within the guide bar for protection - Low hand-arm vibrations - Fatigue-free operation with height-adjustable guide handle - Machine and engine protected by a protective frame and complete engine enclosure - Reduced maintenance thanks to self-adjusting centrifugal clutch - Easy servicing: all maintenance points are easily accessible - Safe and rapid loading with large, foldable lifting eye - Secure lashing for transport thanks to additional lashing points on the engine console - Increased operator comfort thanks to electric start with operating hour counter, engine oil monitor, and battery voltage indicator - Areas of application: road and civil engineering, trench construction, landscaping, base layers for paving, paver settling, and compaction of sand, gravel, or crushed stone Technical Data: Engine: Hatz diesel Max. engine power: 11.2 (15.3) kW/HP Weight: 736 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Upon request, we can also provide financing options. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery - Mercedes-Benz - Iveco Rodpfx Aheym I H Rs Hjcb With 800 used vehicles in stock, we are also one of Germany’s largest commercial vehicle dealers. We supply the complete Weber MT product range! Subject to errors and prior sale. = Further Information = New: Yes Engine brand: Hatz For more information, please contact Marius Herden.

Stanje: rabljeno, For inquiries regarding the vibratory plate, Mr. Herden is your contact person (phone number available upon request). WEBER CR 9 Hatz diesel vibratory plate / Brand new / in stock & immediately available. Price: €12,990.00 net / €15,458.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series impress with high compaction performance and maximum efficiency. They are the top choice for compaction work in classic road and civil engineering as well as paving applications. Balanced running characteristics, low operating noise, and reduced hand-arm vibrations ensure high operator comfort. CR 9 – The new premium class: powerful, robust, reliable: - Precise, infinitely variable, electrohydraulic direction change (forward/reverse) with tip-switch operation - Throttle cable and hydraulic change-over protected inside the guide handle Rodpfxeym I H De Ah Hecb - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide handle - Protection for machine and engine by protective frame and full engine enclosure - Reduced maintenance due to self-tensioning centrifugal clutch - Easy service access – all maintenance components are easily accessible - Safe and efficient loading thanks to large, foldable lifting eye - Secure lashing for transport with additional eyes on the engine console - Enhanced operator comfort through electric start with hour meter, engine oil, and battery voltage monitoring - Areas of application: road and civil engineering, trenching, landscaping, sub-base for paving, settling pavers, and compacting sand, gravel, or crushed stone - Equipped with compaction control and engine protection Technical details: Engine: Hatz diesel Max. engine output: 11.2 kW (15.3 HP) Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Financing options available upon request. We are official sales and service partners for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range! Errors and prior sale excepted. = More information = Condition: New Engine brand: Hatz Contact Marius Herden for more information.

Stanje: rabljeno, For inquiries regarding the vibratory plate, Mr. Herden will assist you (by phone). WEBER CR 8 MDM Hatz Diesel Vibratory Plate / Brand New / In Stock & Immediately Available Sale Price: €10,790.00 net / €12,840.10 gross 3-Year Warranty Shipping available. The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. This makes them the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced running characteristics, high smoothness, and low hand-arm vibrations ensure a high level of operator comfort. CR 8 – The New Premium Class: powerful, robust, reliable operation: - Infinitely variable forward and reverse travel - Hydraulic throttle control and hydraulic switching, both protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable control handle - Protection of machine and engine through a robust frame and full engine enclosure - Reduced maintenance due to the self-tensioning centrifugal clutch - Easy servicing, as all service points are easily accessible - Safe and fast loading thanks to the large, foldable lifting eye - Secure lashing for transport thanks to additional eyelets on the engine console - Increased operator convenience due to electric start with hour meter and engine protection Rodpfxsym I Hwe Ah Hscb - Areas of application: road and civil engineering, trenching, sub-base preparation for paving, compaction of sand, gravel, or crushed stone Technical Specifications Engine: Hatz Diesel Max. engine output: 10.3 kW (14.1 HP) Weight: 605 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm Upon request, we can also provide a financing offer. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telescopic handlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Errors and prior sale excepted. = More information = New: Yes Engine make: Hatz Please contact Marius Herden for more information.

Stanje: rabljeno, For inquiries regarding the vibratory plate, Mr. Herden will assist you (by phone). WEBER CR 8 CCD 2.0 Hatz Diesel Vibratory Plate / New machine / In stock & immediately available Sale price: €11,190.00 net / €13,316.10 gross 3-year warranty Shipping possible. The reversible soil compactors of the CR series impress with powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced operating characteristics, low hand-arm vibrations, and excellent stability guarantee outstanding operator comfort. CR 8 – The new premium class: powerful, robust, and reliable: - Infinitely variable forward and reverse travel - Hydraulic direction switch. Throttle and hydraulics safely integrated into the guide handle - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide bar - Protection for the machine and engine through full engine cover and protective frame - Reduced maintenance through self-tensioning centrifugal clutch - Easy servicing, with all maintenance components easily accessible - Safe and quick loading with a large, foldable lifting eye - Secure transportation thanks to additional lashing eyes in the engine console - Enhanced operator comfort with electric start, hour meter, engine protection, and compaction control - Areas of application: road and civil engineering, trench compaction, subbase for paving and compaction of sand, gravel, or crushed stone Rcedeym I Hqopfx Ah Hjb Technical Data Engine: Hatz Diesel Max. engine output: 10.3 kW (14.1 hp) Weight: 605 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm On request, we will gladly provide you with a financing offer. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are also one of Germany’s largest commercial vehicle dealers. We offer the complete Weber MT range for you! Errors and prior sale excepted. = More information = New: Yes Engine brand: Hatz Please contact Marius Herden for further information.

Stanje: rabljeno, For inquiries regarding the vibratory plate compactor, Mr. Herden will be happy to assist you (by phone at ...). WEBER CR 7 Hatz Diesel Vibratory Plate Compactor / New machine / In stock & immediately available Sales price: €8,690.00 net / €10,341.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series impress with high compaction performance and maximum efficiency. This makes them the first choice for compaction work in classic road and civil engineering, as well as paving. Well-balanced running characteristics, high operational smoothness, and low hand-arm vibrations ensure a very high level of user comfort. CR 7 – Performance and Comfort in Perfection: - Infinitely variable forward and reverse travel - Hydraulic switching for throttle and hydraulics, both protected inside the guide handle - Low hand-arm vibrations - Fatigue-free operation thanks to the height-adjustable guide handle - Protection for the machine and engine via protective frame and full engine cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, as all maintenance elements are easy to access - Safe and quick loading via large, foldable lifting eye - Secure fastening for transport thanks to additional lashing points on the engine console - Greater operating convenience with electric start and hour meter - Areas of application: road and civil engineering, trench construction, landscaping, base layers for paving, vibrating in paving stones, and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Rsdpfx Ajym I Hkoh Hocb Max. engine output: 7.5 (10.3) kW/hp Weight: 475 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm On request, we can also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used commercial vehicles, we are one of Germany’s largest commercial vehicle dealers. We supply the complete Weber MT product range! Errors and prior sale excepted. = Further Information = Condition: New Engine brand: Hatz Please contact Marius Herden for more information.

Stanje: rabljeno, For inquiries regarding the vibratory plate, Mr. Herden is happy to assist you (by phone). WEBER CR 6 Hatz Diesel Vibratory Plate Compactor / Brand New / In Stock & Immediately Available Sale price: €8,190.00 net / €9,746.10 gross 3-year warranty Shipping available The reversible soil compactors of the CR series stand out for their strong compaction performance and maximum efficiency. They are the top choice for compaction work in classic road and civil engineering as well as paving applications. Balanced running characteristics, high smoothness, and low hand-arm vibration levels ensure outstanding operating comfort. CR 6 – Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel; hydraulic changeover - Throttle and hydraulic changeover control integrated and protected within the handle bar - Low hand-arm vibration levels - Fatigue-free operation thanks to height-adjustable steering bar - Protection for machine and engine through engine guard and cover - Reduced maintenance through the self-tensioning centrifugal clutch - Easy servicing with all maintenance components easily accessible - Safe and quick transport loading thanks to a large, foldable lifting eye - Secure lashing for transport using additional lugs on the engine console - Increased operator comfort via electric start - Areas of application: road construction, civil engineering, paving; and thanks to its low height and working width, ideally suited for trench shoring as well Technical Data Engine: Hatz Diesel Max. engine output: 7.5 (10.3) kW/hp Weight: 412 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm On request, we can also provide a financing offer. We are official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Errors and interim sales excepted. Rcjdpfx Ahsym I Hds Hjb = More Information = New: Yes Engine brand: Hatz Please contact Marius Herden for further information.

Stanje: rabljeno, For inquiries regarding the vibratory plate, Mr. Herden is at your service (by phone). WEBER CR 8 Hatz Diesel Vibratory Plate / New Machine / In Stock & Immediately Available. Sales Price: €10,490.00 net / €12,483.10 gross 3-Year Warranty Shipping Possible. Rcedpfx Ahoymv Szo Hsb The reversible soil compactors from the CR series impress with powerful compaction performance and maximum efficiency. Therefore, they are the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced operating characteristics, high smoothness and low hand-arm vibration ensure a high level of operator comfort. CR 8 – The New Premium Class: Powerful, Robust, Reliable Operation: - Infinitely variable forward and reverse travel - Hydraulic direction change and protected hydraulic throttle cable routed within the guide bar - Low hand-arm vibrations - Fatigue-free operation with height-adjustable guide handle - Protection of the machine and engine through protective frame and full engine enclosure - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy service access as all maintenance points are easily reachable - Safe and quick loading via large, foldable lifting eye - Secure lashing for transport thanks to additional lashing points on the engine console - Increased operator convenience via electric start with hour meter - Applications: Road and civil engineering, trench construction, sub-base for paving and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Max. engine output: 10.3 kW (14.1 HP) Weight: 601 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm Finance offers available upon request. We are official sales and service partners for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Subject to errors and prior sale. = More Information = New: Yes Engine brand: Hatz Contact Marius Herden for further information.

Stanje: rabljeno, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). WEBER CR 7 MDM Hatz Diesel Vibratory Plate / New machine / In stock & immediately available Sales price: €9,190.00 net / €10,936.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series impress with their powerful compaction performance and maximum efficiency. They are the first choice for compaction tasks in classic road and civil engineering as well as paver installation. Balanced running characteristics, high smoothness, and low hand-arm vibrations ensure maximum operator comfort. CR 7 – Performance and Comfort in Perfection: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle control and hydraulic switch protected within the guide bar - Low hand-arm vibration - Fatigue-free operation thanks to the height-adjustable guide handle Rodpfjymv Snsx Ah Hocb - Protection for machine and engine by protective frame and full engine cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy service access as all maintenance elements are easily reachable - Safe and quick loading via large, foldable lifting eye - Secure lashing for transport thanks to additional lashing points on the engine console - Enhanced operator convenience via electric start with hour meter, engine oil and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, landscaping, sub-base for paving, settling paving stones, and compaction of sand, gravel, or crushed stone Technical data Engine: Hatz Diesel Max engine output: 7.5 (10.3) kW/HP Weight: 477 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Financing options available on request. We are official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the entire Weber MT product range for you! Errors and prior sale excepted. = More information = New: Yes Engine brand: Hatz Please contact Marius Herden for further information.

Stanje: rabljeno, For inquiries regarding the vibratory plate, Mr. Herden will be pleased to assist you (via phone). WEBER CR 7 CCD 2.0 Hatz Diesel Vibratory Plate Compactor / New Machine / In Stock & Immediately Available Sales Price: €10,190.00 net / €12,126.10 gross 3-Year Warranty Shipping possible. The reversible soil compactors in the CR series stand out for their powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction tasks ranging from classic road and civil engineering to paving construction. Balanced running characteristics, high operating smoothness, and low hand-arm vibrations ensure superior operator comfort. CR 7 – Performance and Comfort in Perfection: - Infinitely variable forward and reverse travel. Hydraulic shift - Throttle cable and hydraulic controls are protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to the height-adjustable handlebar - Machine and engine protected by a protective frame and full engine enclosure - Reduced maintenance effort thanks to the self-adjusting centrifugal clutch - Easy servicing, as all maintenance components are easily accessible - Safe and fast loading with a large, foldable lifting eye - Secure lashing for transport thanks to additional lashing eyes on the engine console - Increased operator comfort through electric start with hour meter, engine oil, and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, gardening and landscaping, substructure for paved areas, compacting pavement, and compaction of sand, gravel, or crushed stone Compaction Control COMPATROL® 2.0: - COMPATROL® 2.0 enables uniform and area-wide compaction - Weak points in the ground can be identified and rectified in time - Easy-to-understand, intuitive display thanks to the LED scale - Up to 25% time/cost savings through fewer compaction passes Technical Data Engine: Hatz diesel Max. engine output: 7.5 (10.3) kW/HP Weight: 477 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Financing offers available on request. We are an official sales and service partner of Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer the complete Weber MT product range! Errors and prior sale excepted. = More Information = Rcodpoymv Shjfx Ah Hjb New: Yes Engine make: Hatz Contact Marius Herden for further information.