A1 Container Spezialcontainer nakup rabljenega (51)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, dolžina zabojnika: 6,95 čevelj, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.200 mm, Kontejner za sušenje vozil Dkodpfsx Hg E Hjx Af Usg

Stanje: novo, Leto izdelave: 2025, barva: oranžna, skupna masa: 10.000 kg, prostornina tovornega prostora: 5 m³, IMMEDIATELY AVAILABLE – PRICE PER UNIT Dkjdpfxsx Ezb Tj Af Usg 2 units of roll-off skip containers according to DIN 30720, open design – trapezoidal shape Type: AM 1.5 s, craneable Usable volume: approx. 5 m³ Paint finish: RAL 2011 (deep orange) - Symmetrical design with single tipping bearings at the discharge edges - Mounting brackets for roll-off systems according to DIN 30720 - Extended discharge slopes to full height (trapezoidal shape) - Bottom pan made from 6 mm St 37.2 (S235JR) - Side walls made from 4 mm St 37.2 (S235JR) - End profile U 100 x 50 x 4 - All corners reinforced - Container craneable (max. total weight 10 t) (triple safety factor according to UVV) - 4 heavy-duty crane lifting eyes, each for 8 t, with profile and guards (1 set = 4 pieces) for transporting the loaded container with crane beam - Certificate: Approved as crane skip - Continuous hooks for tarpaulin and netting - Container internally primed once, externally primed twice and finished with two top coats in one color - Container warning markings according to DIN 67520 Part 2 / DIN 6171 Part 1 - UVV safety stickers - Container tested and approved according to UVV (formerly BGR 186) Offer is non-binding, subject to change and without guarantee or warranty. Intermediate sale reserved. Purchase is binding only upon receipt of payment. The goods remain our property until full payment is received. We accept payments in Euro only, without any additional costs for the seller, exclusively by bank transfer or cash payment. No cheques accepted. Prices are per unit.

Stanje: novo, Leto izdelave: 2025, barva: oranžna, skupna masa: 10.000 kg, prostornina tovornega prostora: 10 m³, IMMEDIATE AVAILABILITY – PRICE PER UNIT Dksdpfxex Ezfro Af Uog 2 units of roll-off skip according to DIN 30720 Open design Type: AM 2.10 Usable capacity: approx. 10 m³ Paint finish: RAL 2011 (deep orange) • Asymmetrical design with single tipping bearing at the discharge edge • Mounting fittings for roll-off systems according to DIN 30720 • 6 mm St 37.2 (S235JR) steel floor pan • 4 mm St 37.2 (S235JR) steel side walls • End profile U 100 x 50 x 4 • All corners reinforced • Continuous tarp and net hooks • Container interior primed once, exterior primed twice and top-coated twice in a single color • UVV sticker with safety instructions • Container tested and approved according to DGUV Rule 114-010 (formerly BGR 186) Offer subject to change and without guarantee or warranty. Interim sale reserved. Purchase is only concluded after payment is received. The vehicle remains our property until full payment is made. We accept payments in Euro only without additional costs for the seller and only via bank transfer or cash payment. No checks. Prices per unit.

Stanje: novo, Leto izdelave: 2025, barva: sivo-črna, skupna masa: 15.000 kg, prostornina tovornega prostora: 12 m³, širina tovornega prostora: 2.440 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 800 mm, AVAILABLE IMMEDIATELY – PRICE PER UNIT 1 piece roll-off container according to DIN 30722-1 Open design, with steel side panels Platform tipping body type K 22 s Internal dimensions: approx. 6.5 x 2.44 x 0.8 meters (all dimensions are approximate) Usable volume: approx. 12 m³ Coating: RAL 7016 (anthracite grey) Mounting fittings for hook-lift systems according to DIN 30722-1 (15,000 kg) with rear steel exterior rollers and subframe made of INP 180 Exterior rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from subframe to bulkhead carrier reinforced with 10 mm gusset plates Bulkhead interior height approx. 1,500 mm Floor pan made of 5 mm St 37.2 (S235JR) Floor beam spacing 750 mm, beam profile U 80 x 50 mm Spring-assisted steel side panels, approx. 0.8 meters high, foldable and removable, divided once in the middle by removable center posts 10 heavy-duty lashing rings recessed into the floor, each rated at 2.5 t 2 heavy-duty lashing rings mounted on the bulkhead, each rated at 5.0 t Rear pendulum tailgate, swinging and foldable, spring-assisted, drive-over capable, with locking hooks and lateral safety central lock according to UVV NOTE: Folding function only available when container is set down Continuous tarpaulin and net hooks Container primed once inside, primed twice outside and double top-coated outside in single color UVV sticker with safety instructions Container inspected and approved according to UVV (formerly BGR 186) Offer subject to change, without liability or warranty. Intermediate sale reserved. Sale only becomes effective upon receipt of payment. The vehicle remains our property until payment has been received in full. We accept payments only in euros, at no extra cost to the seller, and only by bank transfer or cash. No cheques. Price per unit. Dedpfx Afox Ezf Ej Uokg

Stanje: novo, Leto izdelave: 2025, barva: svetlo siva, skupna masa: 10.000 kg, prostornina tovornega prostora: 7 m³, IMMEDIATELY AVAILABLE – PRICE PER UNIT 1 unit skip container according to DIN 30720, open design – trapezoidal shape Type AM 1.7, usable capacity: approx. 7 m³, paintwork: RAL 7040 (window grey). Features: symmetrical shape with single tipping bearing at the discharge edges; mounting brackets for DIN 30720 skip loader system; discharge slopes raised to the full height (trapezoidal form); base tray made of 6 mm St 37.2 (S235JR); side walls made of 4 mm St 37.2 (S235JR); end profile made of U 100 x 50 x 4; all corners reinforced; continuous tarpaulin and net hooks; container primed once inside, double primed and single-colour double coated outside; UVV safety stickers with instructions; container tested and certified according to UVV (formerly BGR 186). Offer is non-binding, without warranty or guarantee. Subject to prior sale. The purchase contract becomes effective only upon receipt of payment. The vehicle remains our property until payment is made in full. We accept payments in euros only, without additional cost to the seller, and only by bank transfer or cash. No cheques. Prices stated per unit. Dksdpfxex Ezcks Af Usg

Stanje: novo, Leto izdelave: 2025, barva: zelen, skupna masa: 10.000 kg, prostornina tovornega prostora: 10 m³, IMMEDIATELY AVAILABLE – PRICE PER UNIT 2 units Container Skip Bins according to DIN 30720 Open design Type: AM 2.10 Usable volume: approx. 10 m³ Paint finish: RAL 6018 (Yellow Green) • Asymmetrical shape with single tipping bearing at the discharge edge • Mounting fittings for skip loading system according to DIN 30720 • Base pan made of 6 mm St 37.2 (S235JR) • Side walls made of 4 mm St 37.2 (S235JR) Dkjdpfxox Ezcqo Af Ueg • End profile in U 100 x 50 x 4 • All corners reinforced • Perimeter hooks for tarpaulin and netting • Container primed once inside, double primed outside, and double-coated in a single color on the exterior • UVV safety stickers with instructions • Container tested and approved according to DGUV Rule 114-010 (formerly BGR 186) Offer non-binding, subject to prior sale, no warranty or guarantee. The purchase is only completed upon receipt of payment. The item remains our property until full payment has been received. We accept payments only in euros by bank transfer or cash, without additional costs for the seller. No checks. Price is per unit.

Stanje: novo, Leto izdelave: 2025, barva: modra, skupna masa: 15.000 kg, prostornina tovornega prostora: 22 m³, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 1.500 mm, IMMEDIATE AVAILABILITY – PRICE PER UNIT 1 roll-off container according to DIN 30722-1 Standard container type S 55 Internal dimensions: approx. 6.5 x 2.3 x 1.5 meters (all dimensions are approximate) Usable capacity: approx. 22 m³ Paint finish: RAL 5010 (Enzian blue) Fittings for hooklift systems according to DIN 30722-1 (15,000 kg) with rear-mounted external steel rollers and subframe made of INP 180 External rollers greaseable and exchangeable Lifting bar Ø 50 mm, hook height 1,570 mm Transition from subframe to front wall carrier reinforced with 10 mm knee plates Floor tray made from 5 mm St 37.2 (S235JR) Side walls made from 3 mm St 37.2 (S235JR) Rounded transition between floor and side wall End profile made from robust round pipe Ø 90 mm Bulkhead spacing 750 mm Bulkhead profile U 80 x 50 mm Double-leaf rear door with Dutch door lock and lateral safety central locking according to UVV Container door lock with assisted opening mechanism Continuous tarp and net hooks Galvanized access ladder to front side according to UVV Container internally primed once, externally double-primed and double-coated in one color UVV safety label and instructions Container inspected and approved according to UVV (formerly BGR 186) Dkodjx Ezbmopfx Af Uog Offer subject to change without notice, no warranty or guarantee. Subject to prior sale. Purchase only becomes valid upon receipt of payment. The vehicle remains our property until full payment is received. We accept only payments in euros with no extra charges for the seller, and only by bank transfer or cash. No checks. Prices quoted per unit.

Stanje: novo, Leto izdelave: 2025, barva: oranžna, skupna masa: 15.000 kg, prostornina tovornega prostora: 15 m³, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 1.000 mm, IMMEDIATELY AVAILABLE – PRICE PER UNIT 1 unit roll-off container according to DIN 30722-1, standard container Type S 33 S. Internal dimensions: approx. 6.5 x 2.3 x 1.0 meters (all dimensions are approximate). Usable volume: approx. 15 m³. Paint: RAL 2011 (deep orange). – Mounting fittings for hook-lift systems according to DIN 30722-1 – Rear-mounted external rollers and subframe made from INP 180 – Lubricatable, replaceable external rollers – Lifting bar Ø 50 mm, hook height 1,570 mm – Floor pan made from 5 mm St 37.2 (S235JR) – Side walls made from 3 mm St 37.2 (S235JR) – Square construction, 90° transition between floor and side walls – Frame spacing 750 mm – Frame profile U 80 x 50 mm – End profile made from robust round tube Ø 90 mm – 10 heavy-duty lashing eyes recessed in the floor, each 2.5 t – 2 heavy-duty lashing eyes mounted on the front wall, each 5.0 t – Swing tailgate at the rear, pendulum-mounted and foldable, spring-assisted and drivable, with locking catch and side safety central locking according to UVV NOTE: Folding function can only be used when the container is set down – All-round hooks for tarpaulin and net – Galvanized access ladder at the front according to UVV – Container primed once inside, primed twice outside, and externally double-coated in one color – Container warning markings according to DIN 67520 Part 2 / DIN 6171 Part 1 – UVV stickers with safety instructions – Container inspected and accepted according to DGUV Rule 114-010 (formerly BGR) Dsdpfx Afsx Ezdbj Ujkg Non-binding offer, subject to change and prior sale. Sale is concluded only upon receipt of payment. The vehicle remains our property until full payment is received. We accept payments only in euros, without additional costs to the seller, and only by bank transfer or cash payment. No checks. Price per unit.

Stanje: novo, Leto izdelave: 2025, barva: modra, skupna masa: 10.000 kg, prostornina tovornega prostora: 10 m³, IMMEDIATELY AVAILABLE – PRICE PER UNIT 2 units Skip Container according to DIN 30720 Open design Model: AM 2.10 Usable volume: approx. 10 m³ Paint finish: RAL 5010 (gentian blue) • Asymmetric design with single pivot bearing at the discharge edge • Mounting brackets for lifting system according to DIN 30720 • Floor pan made of 6 mm St 37.2 (S235JR) Dkodpfex Ezffox Af Ueg • Side walls made of 4 mm St 37.2 (S235JR) • End profile: U 100 x 50 x 4 • All corners reinforced • Continuous tarpaulin and net hooks • Interior primed once, exterior primed twice and exterior painted twice in single color • UVV safety label with relevant instructions • Container inspected and approved according to DGUV Rule 114-010 (formerly BGR 186) Offer without obligation, subject to prior sale, errors excepted. Purchase comes into effect only upon receipt of payment. The vehicle remains our property until full payment is received. We only accept payments in Euro without extra costs for the seller and only via bank transfer or in cash. No cheques accepted. Price per unit.

Stanje: novo, Leto izdelave: 2025, barva: črn, skupna masa: 15.000 kg, prostornina tovornega prostora: 11 m³, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 750 mm, IMMEDIATE AVAILABILITY – PRICE PER UNIT 1 Piece Roll-Off Container according to DIN 30722-1 Standard Container Type S 22 s Internal dimensions: approx. 6.5 x 2.3 x 0.75 meters (all dimensions are approximate) Usable volume: approx. 11 m³ Paint finish: RAL 9005 (jet black) • Mounting fittings for hooklift systems according to DIN 30722-1 (15,000 kg) with rear external steel rollers and INP 180 subframe • External rollers greaseable and replaceable • Lifting bracket Ø 50 mm, hook height 1,570 mm • Transition from subframe to front wall support reinforced with 10 mm knee plates • Floor pan made from 5 mm St 37.2 (S235JR) • Side walls made from 3 mm St 37.2 (S235JR) • Rounded transition between floor and side wall • End profile made of sturdy round tube Ø 90 mm • Crossmember spacing 750 mm • Crossmember profile U 80 x 50 mm • Double-wing door with Dutch door lock and side-mounted safety central locking according to UVV • Door lock with container door opening aid • Roll-up tarpaulin made of high-quality PVC approx. 680g/m², hinged at the front (rolling direction front to back), single-color in grey (SION 7024) • Aluminum rolling tube with inserted crank handle (operation from either left or right side in the direction of travel) Dkjdsx Ezbtepfx Af Usg • 3 removable tarpaulin hoops (slightly gable-shaped) • Ratchets for rear-side tensioning of the tarpaulin • Expander cords for side tensioning of the tarpaulin • All-round tarpaulin and mesh hooks • Galvanized access ladder according to UVV at the front • Container internally primed once, externally double-primed and double single-color painted • UVV decals with safety instructions • Container inspected and certified according to UVV (formerly BGR 186) Offer without obligation, subject to prior sale, errors and omissions excepted. Purchase contract becomes effective only upon receipt of payment. Vehicle remains our property until full payment is received. We accept payments exclusively in euros with no additional costs to the seller, by bank transfer or cash payment only. No checks accepted. Price per unit.

Stanje: novo, Leto izdelave: 2025, barva: zelen, skupna masa: 10.000 kg, prostornina tovornega prostora: 7 m³, IMMEDIATE AVAILABILITY – PRICE PER UNIT 9 units skip container according to DIN 30720 Open design Type: AM 2.7 Dodjx Ezc Depfx Af Uokg Usable capacity: approx. 7 m³ Paint finish: RAL 6018 (Yellow green) • Asymmetric shape with single tilting bracket at the discharge edge • Mounting fittings for skip loader system according to DIN 30720 • Base pan made of 6 mm St 37.2 (S235JR) • Side walls made of 4 mm St 37.2 (S235JR) • End profile made of U 100 x 50 x 4 • All corners reinforced • Continuous hooks for tarpaulins and nets • Container primed inside once, primed twice outside and double single-colour coated on the exterior • UVV stickers with safety instructions • Container inspected and approved according to DGUV Regulation 114-010 (formerly BGR 186) Offer non-binding, subject to prior sale, without warranty or guarantee. Purchase is concluded only upon receipt of payment. The vehicle remains our property until full payment has been received. We accept payments only in euros without additional costs for the seller and only by bank transfer or cash payment. No cheques accepted. Price per unit.

Stanje: novo, Leto izdelave: 2025, barva: oranžna, skupna masa: 10.000 kg, prostornina tovornega prostora: 7 m³, IMMEDIATE AVAILABILITY — PRICE PER UNIT 2 units of skip container according to DIN 30720 with lid Type: AM 5.7 D Usable volume: approx. 7 m³ Paint finish: RAL 2011 (deep orange) • Symmetrical design with single tipping bearing at the discharge edges Dodsx Ezdnjpfx Af Ujkg • Fittings for skip loader system according to DIN 30720 • Floor tray made from 5 mm St 37.2 (S235JR) steel • Discharge slopes made from 4 mm St 37.2 (S235JR) steel • Sidewalls made from 3 mm St 37.2 (S235JR) steel • End profile U 100 x 50 x 4 • All corners reinforced • One steel lid per side with torsion bar spring and hold-down device as per UVV • Container primed once on the inside, double primed and double coated in single color on the outside • UVV stickers with safety instructions • Container inspected and approved according to UVV (formerly BGR 186) Offer is subject to change, without guarantee or warranty. Interim sale reserved. Purchase is only concluded upon receipt of payment. The vehicle remains our property until full payment has been received. We accept only payments in euros at no additional cost to the seller and only by bank transfer or cash. No cheques. Price stated is per unit.

Stanje: novo, Leto izdelave: 2025, barva: oranžna, skupna masa: 15.000 kg, prostornina tovornega prostora: 10 m³, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 750 mm, IMMEDIATE AVAILABILITY – PRICE PER UNIT 2 hook-lift containers according to DIN 30722-1 Standard container type S 20 Internal dimensions: approx. 6.0 x 2.3 x 0.75 meters (all dimensions approx.) Useful volume: approx. 10 m³ Paint finish: RAL 2011 (deep orange) Mounting fittings for hook-lift systems to DIN 30722-1 (15,000 kg), with rear external steel rollers and subframe made from INP 180 External rollers are greaseable and replaceable Mounting bracket ø 50 mm, hook height 1,570 mm Transition from subframe to front wall reinforcement with 10 mm knee plates Floor tray made of 5 mm St 37.2 (S235JR) Side walls made of 3 mm St 37.2 (S235JR) Dkodpfx Aex Ezduof Usg Rounded transition between floor and side wall End profile made from robust round tube ø 90 mm Rib spacing: 750 mm Rib profile: U 80 x 50 mm Double-leaf door with Dutch-style lock and side-mounted central safety lock in accordance with UVV Door lock includes container door opening aid Continuous tarp and net hooks all round Zinc-plated access ladder to UVV, located at front end Container primed once inside, double primed and double coated in single color on the outside Container warning marking according to DIN 67520 Part 2 / DIN 6171 Part 1 UVV safety-labels with instructions Container inspected and accepted as per UVV (formerly BGR 186) Offer subject to change, without liability or warranty. Prior sale reserved. The purchase is only concluded upon receipt of payment. The vehicle remains our property until full payment is received. We accept only payments in euros without additional costs to the seller and only by bank transfer or cash. No checks. Price is per unit.

Stanje: novo, Leto izdelave: 2025, barva: zelen, skupna masa: 10.000 kg, prostornina tovornega prostora: 7 m³, IMMEDIATELY AVAILABLE – PRICE PER PIECE 6 units of skip containers according to DIN 30720 with rubble discharge flap Type: AM 2.7 KL Usable volume: approx. 7 m³ Paint finish: RAL 6018 (yellow-green) • Asymmetric design with single tipping bearing at the discharge edge • Mounting brackets for skip loader systems according to DIN 30720 • Base tub made of 6 mm St 37.2 (S235JR) • Side walls made of 4 mm St 37.2 (S235JR) • End profile made of U 100 x 50 x 4 • All corners reinforced • Rear rubble discharge flap, foldable and secured on each side with an over-center latch, guided on lower hinges • Continuous hooks for tarpaulins and nets • Container interior primed once, exterior double-primed and double-coated in single color • UVV sticker with safety instructions • Container inspected and approved according to DGUV Regulation 114-010 (formerly BGR 186) Dkjdpfx Afox Ezd Is Ueg This offer is subject to change, without obligation or warranty. Subject to prior sale. Purchase becomes valid only upon receipt of payment. The vehicle remains our property until full payment is received. We accept only payments in euros, free of extra charges for the seller, by bank transfer or in cash. No checks. Prices per unit.

Stanje: novo, Leto izdelave: 2025, barva: modra, skupna masa: 10.000 kg, prostornina tovornega prostora: 7 m³, IMMEDIATELY AVAILABLE – PRICE PER UNIT 6 skip containers according to DIN 30720 with rubble flap Dsdpfx Aex Ezd Uef Uskg Model: AM 2.7 KL Usable volume: approx. 7 m³ Paint: RAL 5010 (Gentian Blue) • Asymmetric design with single tipping bearing at discharge edge • Mounting brackets for skip loader system according to DIN 30720 • Floor tray made of 6 mm St 37.2 (S235JR) • Side walls made of 4 mm St 37.2 (S235JR) • End profile U 100 x 50 x 4 • All corners reinforced • Rear fold-down rubble flap, secured on each side with an over-centre fastener and hinged at the bottom • Circumferential hooks for tarp and net • Container primed once inside, double-primed and double single-color coated outside • UVV safety sticker with safety instructions • Container inspected and approved according to DGUV Rule 114-010 (formerly BGR 186) Offer non-binding, subject to prior sale, no warranty or guarantee. Purchase is concluded only upon receipt of payment. The vehicle remains our property until full payment is received. We accept only payments in euros with no additional cost to the seller and only by bank transfer or cash payment. No checks. Prices are per unit.

Stanje: novo, Leto izdelave: 2025, barva: oranžna, skupna masa: 10.000 kg, prostornina tovornega prostora: 5 m³, IMMEDIATELY AVAILABLE – PRICE PER UNIT 6 pieces skip container according to DIN 30720 Open design Dkjdpfxex Ezbyo Af Ujg Type: AM 2.5 Usable capacity: approx. 5 m³ Paint finish: RAL 2011 (deep orange) • Asymmetrical design with single tipping bearing at the tipping edge • Lifting lugs for skip loader systems acc. to DIN 30720 • Floor pan made of 6 mm S235JR steel • Side walls made of 4 mm S235JR steel • End profile: U 100 x 50 x 4 • All corners reinforced • Continuous hooks for tarpaulin and net • Water drainage hole • At the rear tipping edge (front right), a 12.5 mm ø borehole in the lower side wall at floor level • Container internally primed once, externally double primed and double coated in single-color outside • UVV safety stickers included • Container tested and certified according to DGUV Rule 114-010 (formerly BGR 186) Offer subject to change, no guarantee or warranty. Sale subject to prior sale. Purchase is valid only upon receipt of payment. The item remains our property until full payment is received. We accept payments in Euro only without additional costs for the seller, and only by bank transfer or cash payment. No checks. Prices are per unit.

Stanje: novo, Leto izdelave: 2025, barva: sivo-črna, skupna masa: 15.000 kg, prostornina tovornega prostora: 15 m³, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 1.000 mm, IMMEDIATELY AVAILABLE – PRICE PER UNIT 1 unit roll-off container according to DIN 30722-1 Standard container Type S 33 s Internal dimensions: approx. 6.5 x 2.3 x 1.0 meters (all dimensions are approximate) Usable volume: approx. 15 m³ Paint finish: RAL 7016 (Anthracite Grey) Mounting fittings for hook-lift systems according to DIN 30722-1 Rear-mounted external rollers and subframe made of INP 180 External rollers greaseable and replaceable Lifting lug Ø 50 mm, hook height 1,570 mm Base pan made of 5 mm St 37.2 (S235JR) Side walls made of 3 mm St 37.2 (S235JR) Rectangular design, 90° transition from floor to side walls Strut spacing 750 mm Strut profile U 80 x 50 mm End profile made of heavy-duty round pipe Ø 90 mm 10 heavy-duty floor-mounted lashing rings, each rated at 2.5 t 2 heavy-duty lashing rings fitted to bulkhead, each rated at 5.0 t Swing tailgate at rear, swinging and foldable, spring-assisted and drive-over, with locking hooks and lateral safety central lock according to UVV Dsdpfxex Ezcwe Af Ujkg NOTE: Folding function is only usable when container is unloaded Continuous tarpaulin and net hooks Galvanized safety ladder to front according to UVV Container primed once inside, double-primed outside, and double-painted in single colour outside Container warning markings in accordance with DIN 67520 Part 2 / DIN 6171 Part 1 UVV stickers with safety instructions Container inspected and approved according to DGUV Regulation 114-010 (formerly BGR) Offer is subject to change, without liability or guarantee. Prior sale reserved. Purchase contract is concluded only upon receipt of payment. The vehicle remains our property until full payment is received. We accept only payments in euros without additional costs to the seller, and only by bank transfer or cash payment. No cheques. Price per piece.

Stanje: novo, Leto izdelave: 2025, barva: sivo-črna, skupna masa: 10.000 kg, prostornina tovornega prostora: 5 m³, IMMEDIATELY AVAILABLE – PRICE PER UNIT 2 pieces skip containers according to DIN 30720 Open design – trapezoidal shape Type: AM 1.5 S, craneable Usable volume: approx. 5 m³ Paint finish: RAL 7016 (Anthracite grey) • Symmetrical shape with single tipping bearing at discharge edges • Mounting brackets for DIN 30720 skip loader systems • Full-height discharge slopes (trapezoidal design) • Base tray made of 6 mm St 37.2 (S235JR) • Side walls made of 4 mm St 37.2 (S235JR) • End profile: U 100 x 50 x 4 • All corners reinforced • Container craneable (max. 10 t total weight) (triple safety in accordance with UVV regulations) • 4 heavy-duty crane lugs, each for 8 t, with profile and deflectors (1 set = 4 pieces) for transporting the loaded container using a lifting beam • Certificate (approved as crane container) • Continuous hooks for tarpaulin and net • Inside of container primed once, exterior primed twice and painted with double single-color coating • Container warning markings according to DIN 67520 part 2 / DIN 6171 part 1 Dodex Ezb Hspfx Af Uskg • UVV safety labels with instructions • Container inspected and certified according to UVV (formerly BGR 186) Offer is subject to change without notice, without guarantee or warranty. Intermediate sale reserved. Purchase is concluded only upon receipt of payment. The vehicle remains our property until full payment is received. We accept payments in Euros only, free of charge for the seller, by bank transfer or cash. No cheques accepted. Prices quoted per unit.

Stanje: novo, Leto izdelave: 2025, barva: oranžna, skupna masa: 15.000 kg, prostornina tovornega prostora: 8 m³, širina tovornega prostora: 2.400 mm, dolžina tovornega prostora: 4.500 mm, višina nakladalnega prostora: 800 mm, IMMEDIATELY AVAILABLE – PRICE PER UNIT 1 Piece Roll-off Container according to DIN 30722-1 Open design with steel side walls Flatbed tipping body Type K 14 S Internal dimensions: approx. 4.5 x 2.44 x 0.8 meters (all dimensions approximate) Usable volume: approx. 8 m³ Paint finish: RAL 2011 (deep orange) Lifting lugs for hook-lift systems according to DIN 30722-1 (15,000 kg) with rear-mounted external steel rollers and subframe made of INP 180 External rollers are greaseable and replaceable Pick-up bar Ø 50 mm, hook height 1,570 mm Transition from subframe to front wall support reinforced with 10 mm gusset plates Internal front wall height approx. 1,500 mm Floor pan made from 5 mm St 37.2 (S235JR) Dkjdpox Ezbgefx Af Uog Floor cross member spacing 750 mm Cross member profile U 80 x 50 mm Steel side walls approx. 0.8 meters high, foldable and removable, 1x split in the middle by removable central pillars 10 heavy-duty recessed lashing eyes in the floor, each rated at 2.5 t Heavy-duty lashing eyes mounted on the front wall, each rated at 3.0 t behind the front wall supports, height approx. 500 mm Swing tailgate at the rear, can swing and fold down, spring-assisted and drivable, fitted with locking hooks and side-mounted central safety lock according to UVV. NOTE: Folding function is only usable when container is set down Continuous tarpaulin and net hooks around the rim Container primed once inside, double-primed and double top-coated in single color on the outside 2K paint system Galvanized front-mounted access ladder according to UVV UVV safety stickers fitted Container warning markings according to DIN 67520 Part 2 / DIN 6171 Part 1 Container inspected and approved according to UVV (formerly BGR 186) Offer non-binding, no warranty or guarantee. Subject to prior sale. Sale is only concluded upon receipt of payment. The vehicle remains our property until full payment is received. We accept payment in Euros only, free of charge for seller, and only by bank transfer or cash. No cheques accepted. Price per unit.

Stanje: novo, Leto izdelave: 2025, barva: modra, skupna masa: 15.000 kg, prostornina tovornega prostora: 15 m³, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 1.000 mm, IMMEDIATELY AVAILABLE – PRICE PER UNIT 1 Roll-off Container according to DIN 30722-1 Standard Container Type S 33 s Internal dimensions: approx. 6.5 x 2.3 x 1.0 meters (all measurements are approximate) Usable volume: approx. 15 m³ Coating: RAL 5010 (Gentian Blue) Fittings for hook-lift systems according to DIN 30722-1 with rear external rollers and subframe made of INP 180 steel External rollers are greaseable and can be replaced Bracing bracket Ø 50 mm, hook height 1,570 mm Base tray made of 5 mm St 37.2 (S235JR) Side walls made of 3 mm St 37.2 (S235JR) Rectangular design, floor/side wall transition 90° Frame spacing 750 mm Frame profile U 80 x 50 mm End profile made of heavy-duty round tube Ø 90 mm 10 heavy-duty lashing rings (2.5 t each) flush-mounted in the floor 2 heavy-duty lashing rings (5.0 t each) mounted on the front wall Swinging tailgate at the rear, pivotable and fold-down, spring-assisted and drive-over, with closing hook and side safety central locking in accordance with UVV NOTE: The fold-down function is only usable when the container is set down Continuous hooks for tarpaulin and netting Galvanized ladder at the front in accordance with UVV Dkodpfjx Ezc Rox Af Uog Container primed inside once, primed twice outside, and double-coated in single color on the outside Container warning markings according to DIN 67520 part 2 / DIN 6171 part 1 UVV safety label and instructions Container inspected and certified in accordance with DGUV regulation 114-010 (formerly BGR) Offer subject to change, errors and prior sale excepted. The sale is concluded only upon receipt of payment. The vehicle remains our property until full payment is received. We only accept payments in euros without additional costs for the seller and only by bank transfer or cash. No checks accepted. Prices are per unit.

Stanje: novo, Leto izdelave: 2025, barva: rumena, skupna masa: 15.000 kg, prostornina tovornega prostora: 15 m³, širina tovornega prostora: 2.440 mm, dolžina tovornega prostora: 6.250 mm, višina nakladalnega prostora: 1.000 mm, IMMEDIATE AVAILABILITY – PRICE PER UNIT 2 units, roll-off containers according to DIN 30722-1 Open design with steel drop sides Platform tipping body type K 33 S Internal dimensions: approx. 6.25 x 2.44 x 1.0 meters (all dimensions are approximate) Usable volume: approx. 15 m³ Paintwork: RAL 1007 (Narcissus Yellow) – Mounting fittings for hook lift systems according to DIN 30722-1 (15,000 kg), with rear steel outer rollers and subframe made of INP 180 Dkodpfox Ezfljx Af Uog – Outer rollers greaseable and replaceable – Lifting brackets Ø 50 mm, hook height 1,570 mm – Transition from subframe to front wall support reinforced with 10 mm knee plates – Internal front wall height approx. 1,500 mm – Floor pan made of 5 mm St 37.2 (S235JR) – Floor crossmember spacing: 500 mm – Crossmember profile: U 80 x 50 mm – Steel drop sides, height approx. 1.0 meter, folding and removable, 2-part separation via removable center stanchions – 8 heavy-duty lashing eyes recessed into the floor, each rated for 2.5 t – Rear pendulum flap, swinging and folding, spring-assisted and drivable over, with locking hooks and side safety central lock to UVV standard NOTE: Folding function only usable when container is set down – Perimeter hooks for tarpaulin and net – Container primed once inside, double-primed and double-painted in one color outside – UVV stickers with safety instructions – Container tested and approved according to UVV (formerly BGR 186) Offer subject to change without notice, no warranty or guarantee. Intermediate sale reserved. The contract of sale concludes only upon receipt of payment. The vehicle remains our property until full payment is received. We accept payments exclusively in euros, without additional costs to the seller and only by bank transfer or cash payment. No checks. Prices quoted per unit.

Stanje: novo, Leto izdelave: 2025, barva: zelen, skupna masa: 10.000 kg, prostornina tovornega prostora: 7 m³, IMMEDIATELY AVAILABLE – PRICE PER UNIT 2 units skip container with lid according to DIN 30720 Type: AM 5.7 D Usable volume: approx. 7 m³ Paint finish: RAL 6018 (Yellow-green) Dedpfx Afox Ezdho Uskg • Symmetrical design with single tipping bearing on discharge edges • Mounting brackets for hooklift system in accordance with DIN 30720 • Floor tub made of 5 mm St 37.2 (S235JR) • Tipping slopes made of 4 mm St 37.2 (S235JR) • Side walls made of 3 mm St 37.2 (S235JR) • End profile U 100 x 50 x 4 mm • All corners reinforced • One steel lid per side with torsion bar spring and hold-down devices according to UVV • Container primed once inside, double primed outside and finished with double single-color coating on the outside • UVV safety instruction sticker • Container tested and approved in accordance with UVV (formerly BGR 186) Offer is non-binding, without warranty or guarantee. Subject to prior sale. Purchase is concluded only upon receipt of payment. The vehicle remains our property until full payment is made. We accept payments only in Euros without additional costs to the seller and only by bank transfer or cash. No cheques accepted. Prices are per unit.

Stanje: novo, Leto izdelave: 2025, barva: sivo-črna, skupna masa: 10.000 kg, prostornina tovornega prostora: 7 m³, IMMEDIATE AVAILABILITY – PRICE PER UNIT 15 units roll-off containers according to DIN 30720 with rubble discharge flap Type: AM 2.7 KL Usable capacity: approx. 7 m³ Paint finish: RAL 7016 (Anthracite Grey) • Asymmetrical design with single tipping bearing at the discharge edge • Pickup fittings compatible with DIN 30720 roll-off systems • Bottom pan made of 6 mm St 37.2 (S235JR) • Side walls made of 4 mm St 37.2 (S235JR) • End profile: U 100 x 50 x 4 mm Djdox Ezdzjpfx Af Uokg • All corners reinforced • Rear drop-down rubble discharge flap, secured on each side with an over-centre latch and guided on hinges underneath • Circumferential hooks for tarps and nets • Container internally primed once, externally double-primed and double-coated in single colour • UVV sticker with safety instructions • Container tested and approved in accordance with DGUV Rule 114-010 (formerly BGR 186) Offer subject to change, without obligation or guarantee. Prior sale reserved. Purchase becomes effective only upon receipt of payment. The item remains our property until full payment is received. We accept payment only in euros, free of charge to the seller, and only by bank transfer or cash. No cheques accepted. Price is per unit.

Stanje: novo, Leto izdelave: 2025, barva: srebrn, skupna masa: 15.000 kg, prostornina tovornega prostora: 20 m³, širina tovornega prostora: 2.400 mm, dolžina tovornega prostora: 5.000 mm, višina nakladalnega prostora: 1.750 mm, IMMEDIATE AVAILABILITY – PRICE PER UNIT 4 roll-off containers according to DIN 30722-1 ECOLINE Type S 20 ECO S Internal dimensions: approx. 5.0 x 2.4 x 1.8 meters (all dimensions are approximate) Usable volume: approx. 20 m³ Coating: galvanized? Attachments for hooklift systems according to DIN 30722-1 (15,000 kg) with rear external steel rollers and subframe made of INP 180 External rollers greaseable and replaceable Pickup bar Ø 50 mm, hook height 1,570 mm Transition from subframe to front wall carrier reinforced with 10 mm knee plates? Base pan made of 4 mm St 37.2 (S235JR)? Side walls made of 3 mm St 37.2 (S235JR)? Design without interior cross braces? End profile made of sturdy rectangular tube RR120x8 mm? Floor rib spacing 750 mm Rib profile U 80 x 50 mm? Single-winged rear door with rubber seal, eye bolts, and ratchet lock in accordance with UVV? Container welded watertight and subsequently water-tested? Continuous tarpaulin and net hooks? Galvanized access ladder on the front wall according to UVV? Container hot-dip galvanized? Container warning markings according to DIN 67520 Part 2 / DIN 6171 Part 1? Dkedpjx Ezfxjfx Af Ueg UVV stickers with safety instructions? Container inspected and approved according to UVV (formerly BGR 186) Offer non-binding, without guarantee or warranty. Subject to prior sale. The purchase is only completed upon receipt of payment. The vehicle remains our property until full payment has been made. We accept payments only in euros without additional costs to the seller and only by bank transfer or cash payment. No checks. Prices are per unit.

Stanje: novo, Leto izdelave: 2025, barva: zelen, skupna masa: 15.000 kg, prostornina tovornega prostora: 10 m³, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 750 mm, IMMEDIATELY AVAILABLE – PRICE PER UNIT 2 roll-off containers according to DIN 30722-1 Standard container Type S 20 s Internal dimensions: approx. 6.0 x 2.3 x 0.75 meters (all dimensions are approximate) Usable volume: approx. 10 m³ Paintwork: RAL 6018 (Yellow Green) Fittings for hooklift systems according to DIN 30722-1 (15,000 kg) with rear-side external steel rollers and subframe made of INP 180 Exterior rollers are greaseable and replaceable Pickup bar Ø 50 mm, hook height 1,570 mm Transition from subframe to front wall reinforced with 10 mm knee plates Base tray made of 5 mm St 37.2 (S235JR) Side walls made of 3 mm St 37.2 (S235JR) Rounded transition between base and side wall End profile made of solid round tube Ø 90 mm Rib spacing 750 mm Rib profile U 80 x 50 mm Double-wing door with Dutch-style lock and side safety central locking according to accident prevention regulations (UVV) Door locking with container door opening aid Roll-up tarp made of high-quality PVC approx. 680g/m², hinged to the right (passenger side) in the direction of travel Tarp single-colored in light green Djdpfox Ezcdox Af Uskg Aluminum roll bar with attached crank Additional galvanized climbing ladder at the front panel (for improved tarp handling) Additional anti-slip steps made of checker plate between front wall supports 3 removable tarp bows (slightly arched) 3 tarp holders on the side 3 ratchets for lateral tensioning of the tarp Elastic cords at front and rear to tension the tarp Continuous tarp and net hooks around the perimeter Galvanized climbing ladder at the front according to UVV Container primed once internally, double primed externally, and double coated in single color externally Container warning marking according to DIN 67520 part 2 / DIN 6171 part 1 UVV sticker with safety instructions Container inspected and approved according to UVV (formerly BGR 186) Offer subject to change, without guarantee or warranty. Intermediate sale reserved. The sale is completed only upon receipt of payment. The vehicle remains our property until full payment is received. We only accept payments in Euro, without additional costs for the seller, and only by bank transfer or cash payment. No checks. Price quoted per unit.