Gozdarsko vozilo

CL 320

Stanje: rabljeno, Westtech Woodcracker CL320 Immediately available Year of manufacture: 2022 Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Hnsdpfjyfvp Rsx Ai Ajk Gripper opening = shear opening (mm): 1,060 Own weight (basic – fully equipped) (kg): 620 – 1,170 Recommended flow rate main circuit (l/min): 70 – 150 Recommended operating pressure main circuit (bar): 280 Recommended flow rate auxiliary circuit (l/min): 45–60 Recommended operating pressure auxiliary circuit (bar): 200 Recommended carrier vehicle operating weight (t): 12 – 20 Optional: Autospeed Optional: Collecting gripper Optional: Hydraulic cylinder swivel device: 2 x 48° Adapter plates (MS01 / MS03 / MS08 / etc...) available on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you. Rental possible = More information = New: Yes Contact Tobias Ebert for more information.

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 3 h, MORITZ FR 75 (0010) _RH-10575/6-II Pfanzelt Forestry Crawler (0020) Dimensions: (0030) - Tracked vehicle with AS rubber track system, (0040) Track width 300 mm (0050) - Hydraulically adjustable width, (0060) from 1,200 mm to 1,600 mm external width (0070) Telescopically adjustable via radio control (0080) - Overall length with mounted winch and (0090) dozer blade approx. 2,300 mm (0100) - Ground clearance: approx. 320 mm (0110) - Height to top edge of frame approx. 1,350 mm (0120) - Approach angle approx. 50° at the front and degree at the rear (0140) - Weight approx. 1.0 t in (0150) standard configuration (0160) Engine: (0170) - Deutz diesel engine TD2.9L4 4 cylinders, water-cooled, turbocharged (0190) - Output 55 kW / 75 HP (0200) - EU Emission Stage V (0210) - Fuel capacity: approx. 45 l (0220) - Hydraulic oil: approx. 30 l (0230) - Cleanfix reversible fan (0240) - Combination radiator water/hydraulic oil (0250) Drive hydraulics: (0260) - Closed 2-circuit system (0270) proportional (2 x 11 kW), (0280) - All drive functions controllable via radio (0290) - Pre-installed fine oil filtration (0310) - Infinitely variable driving speed: 1st gear 0–3 km/h and 2nd gear approx. 0–6 km/h Hnsdpfx Aisxbitte Ask (0330) - Infinitely adjustable maximum speed (0350) - Drift compensation setting for balancing (0360) hillside gravity during (0370) mowing work across slopes (0380) - Automatically hydraulically tensioned (0390) double idler wheel (0400) On-board hydraulics: (0410) - Separate oil circuit, pump delivers approx. l/min at 200 bar (0430) - Standard scope includes one proportional (0440) control unit (for lifting gear) with float position (0460) - Optionally up to 4 (0470) proportional double-acting valves (0480) and 2 on/off double-acting (0490) valves (0500) Chassis: (0510) - Torsion-resistant box profile made of (0520) special steel (0530) - Large lockable storage box (0540) integrated on the side of the chassis (0550) and one top storage box (open) (0560) - Lashing points for securing the crawler (0570) - Large engine hood for maintenance (0580) - Full-length underbody guard made (0590) of solid steel (0600) - Surrounding branch deflector with (0610) integrated hood protection (0620) - Standard rear lifting unit with max. (0630) lifting force at coupling point: 11 kN (0640) - Optional front lifting unit with max. (0650) lifting force at coupling point: 7 kN (0660) Machine operation: (0670) - Radio remote control for all functions (0680) - Emergency stop (0690) - Diesel engine speed adjustment (0700) - Fan reversal (0710) - Driving and steering (0720) - 1st and 2nd gear selection (0730) - Drift compensation setting (0740) - Winch control (0750) - Dozer blade up/down (0760) - Lifting gear float position (0770) - Optional lifting gear relief (0780) - Track width adjustment (0790) - Travel direction change (reversing) (0800) - PTO on/off (0810) - Auxiliary control valves (0820) - Winch operation / external consumer (0830) - Horn (0840) - Optional lighting (0850) ALL RADIO COMMANDS ON ONE CONTROL LEVEL (0860) PTO TRANSMISSION Crawler powered by PTO gearbox (0870) - Maintenance-free, oil-bath operated and (0880) oil-cooled multi-plate clutch (0890) PTO shaft speed at gearbox approx. 540 rpm at 2,100 rpm engine speed (0910) Rotation direction viewed from the stub (0920) in clockwise direction (0930) PERFORMANCE HYDRAULICS Crawler hydraulic power supply (0940) LIFTING DEVICE Excavation device winch (

Leto izdelave: 2022, stanje: rabljeno, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Westtech Woodcracker CL320 Felling Grapple / in stock & immediately available / Year: 2022 / DEMO unit / as-new condition Price: €8,890.00 net / €10,579.10 gross Hnedpfjyix N Usx Ai Ask Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening = shear opening (mm): 1,060 Own weight (basic – full equipment) (kg): 620 – 1,170 Recommended main circuit flow rate (l/min): 70 – 150 Recommended main circuit operating pressure (bar): 280 Recommended auxiliary circuit flow rate (l/min): 45–60 Recommended auxiliary circuit operating pressure (bar): 200 Carrier vehicle operating weight (t): 12 – 20 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We offer a very large selection of various Westtech products in our warehouse, all ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. Upon request, we are also happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products for you! Subject to errors and prior sale! Internal number: 121059-F = More information = New: No Part suitable for: Application: Forestry Please contact Marius Herden for further information.

Stanje: novo, številka stroja/vozila: NEW-61, Westtech Woodcracker CL 320 Hnedpfsi N A Uujx Ai Aok > New machine > Manufacturer: Westtech Woodcracker > Model: CL 320 > Maximum cutting diameter softwood: 400 mm > Maximum cutting diameter hardwood: 320 mm > Gripper opening width: 1060 mm > Operating pressure: 280 bar > Own weight: 590 kg (base machine) The following options are available: > Accumulation gripper (additional weight + 235 kg) > Cylinder swivel device 2 x 48° (additional weight + 235 kg) > Changeover valve for accumulation gripper and cylinder swivel device > Autospeed valve > Spare blade

Stanje: rabljeno, Leto izdelave: 2014, 4900 operating hours Shredding of hardwood up to 45 cm Shredding of softwood up to 56 cm Throughput up to approx. 240 solid cubic meters Feed opening: Feed width 1.20 m Feed height (in mm): 680 Drum diameter: 82 cm Helix rotor Hydraulic blower Radio JES for shredder, camera, Hsdpfx Aov Em I Hsi Ajnk Screens G30, G80, Truck: 230,000 km, approx. 12,000 operating hours The machine has always been well maintained and is in good condition. Location: Customer

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 11.315 h, Gosenicarski nakladalnik s približno 2,2 m³ 4+1 žlico, dodatna rešetka na žlici, zaščitna mreža spredaj na kabini, talne plošče 560 mm, delovnih ur: 11315, sistem za gašenje požara, kamera za vzvratno vožnjo, klimatska naprava, vozilo je lahko polepljeno in/ali označeno z reklamami. SI85292 Naša ponudba je praviloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam lahko pripravimo ponudbo pri naših partnerskih servisih! Vozilo je lahko polepljeno in/ali označeno z reklamami. Veljajo naši splošni dobavni in plačilni pogoji. Za ta predmet vam z veseljem pripravimo ponudbo za financiranje ali leasing. Prosimo, kontaktirajte nas! Hsdpsu Eabkefx Ai Ajnk

Stanje: rabljeno, prevoženi kilometri: 191.972 km, moč: 301 kW (409,25 KM), prva registracija: 04/2017, vrsta goriva: dizel, lastna masa: 16.284 kg, največja dovoljena obremenitev: 15.716 kg, skupna masa: 32.000 kg, velikost pnevmatike: -, konfiguracija osi: 8x4, zavore: zaviranje z motorjem, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, Leto izdelave: 2017, Oprema: ABS, klimatska naprava, računalnik na krovu, žerjav, ref: VO26-2112 SYLTRAILER FOR SALE: Construction Tipper Truck with Palfinger Epsilon Crane 16T – 3 Extensions – SCANIA G 410 – 8x4 – 2017 - General Information Brand / Model: Scania G 410 Type: Hooklift truck with crane Drive configuration: 8x4 Year: 2017 Color: Red Mileage: 191,972 km Chassis number: YS2G8X4000545 Fuel: Diesel Transmission: Automatic - Engine Engine: Scania 410 – 6 cylinders Power: 410 hp - Transmission Gearbox: Automatic Hydraulic retarder: Yes (+150 kg) - Hsdpfx Asyw Trzoi Ajnk Axle configuration Layout: 8x4 - Tipper body Body brand: COX Bennes - Auxiliary crane Brand: Palfinger Epsilon Boom configuration: 3 extensions Capacity: 16T High-performance hydraulic crane Cranes periodic inspection (VGP): last inspection December 2025 - Weights & Capacities GVWR: 32,000 kg GCWR: 44,000 kg Unladen weight: 16,284 kg - Equipment COX Bennes tipper body Palfinger Epsilon crane Hydraulic retarder Complete hydraulic system Power steering Robust Scania chassis - Cab & Comfort Comfortable Scania G cab: Air conditioning Air-suspended driver's seat Ergonomic dashboard Cab storage compartments - Safety ABS / ASR / EBS Scania engine brake Hydraulic retarder - Highlights 8x4 configuration COX Bennes tipper body Palfinger Epsilon 16T crane, 3 extensions Hydraulic retarder 191,972 km GVWR 32T / GCWR 44T VGP last inspection 12/2025 Delivery time (in days): 1 ABS ASR Air conditioning Type of air conditioning: Automatic climate control Power steering ESP Central locking On-board computer Cruise control Hydraulic retarder Crane Auxiliary crane brand: PALFINGER Auxiliary crane model: EPSILON Power: 410HP DIN Boom brand: Palfinger Serial number: YS2G8X4000545 Engine power: 301kW Administrative power: 34CV Engine displacement: 12,742cm³ Idle noise level: 92db

Stanje: novo, Leto izdelave: 2026, Platform length 6000 mm Available from stock: 84427 St. Wolfgang - Immediately available - Subject to prior sale - Container platform without side walls, with lashing point strip Width: 2500 mm Floor: 5 mm S235 steel Subframe construction: Subframe INP 180 Hodpfx Aoyr Dt Dsi Aenk UVV tested according to DIN 30722-1 (12,000 kg) C-lock: Standard External rollers greasable and replaceable Front wall: Debr Sfoymlk Ho Ebaeki (note: unclear text, possibly a typo or placeholder) Height: 1600 mm Hook height: 1570 mm Bolted front ladder, DIN, RAL 3002 Carmine Red Special equipment: Reinforced mounting bracket, 60 mm Lashing point rail on both sides 2 x lashing rings in the front wall, lashing load 3.5 t each Rear: Beveled ramp Coating: Primed inside and outside Exterior additionally coated with synthetic resin paint, RAL 7015 Slate Grey Inspected in accordance with DGUV 214-017 Suitable for trailers from Pronar, Krampe, Fliegl Available from stock: 84427 St. Wolfgang - Subject to prior sale - Payment terms: 100% payment before loading. Goods remain our property until full payment is received. Our general terms and conditions apply. Offer is subject to change without obligation or warranty. We are happy to provide you with a non-binding quotation. You can find our complete product range at decker-containerbau

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 920 mm, skupna dolžina: 12.300 mm, skupna širina: 2.540 mm, skupna višina: 480 mm, vzmetenje: zrak, Leto izdelave: 2012, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje = Dodatne informacije = Splošne informacije Leto izdelave: 2012 Konfiguracija osi Vzmetenje: zračno vzmetenje Zadnja os 1: dvojna guma Zadnja os 2: dvojna guma Zadnja os 3: dvojna guma; krmiljena Teže Hnodpfeut Hnfox Ai Ask Lastna masa: 10.280 kg Nosilnost: 33.720 kg Skupna dovoljena masa: 44.000 kg Funkcionalno Višina tovorne površine: 45 cm Izvlečna nadgradnja: Da Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro Finančne informacije Cena: po dogovoru Dodatne informacije Za več informacij kontaktirajte Davida F Middelmana.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 151 kW (205,30 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, skupna masa: 17.990 kg, obratovalna teža: 17.990 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, prva registracija: 09/2024, naslednji pregled (TÜV): 09/2025, emisijski razred: Euro 5, prostornina žlice: 3,22 m³, Leto izdelave: 2022, obratovalne ure: 294 h, številka stroja/vozila: HNNM000001, Oprema: UVV varnostni pregled, dodatne luči, filter saj, hidravlika, jeklene gosenice, kabina, klimatska naprava, računalnik na krovu, Price on request – Demo machine with only 250 hours. Demo machine in like-new condition with 6-way folding blade + 3-tooth ripper Transport width: 2,999 mm This machine is fully equipped for 3D control. * Operating weight: 17,990 kg * IVECO engine, 6-cylinder, 6.7 liters, 205 HP * Linde hydraulic drive. More information at klarmann.de/shantui All prices plus VAT, ex works Eltmann. Hedpfoqnvqfsx Ai Aenk