Tehnologija gnojevke

Wienhoff 22.800 T PTW PROFI LINE

22,800 T PTW PROFI LINE
(0010) Used Wienhoff slurry tanker
(0020) Safety valve
(0030) Simple tank venting and aeration with
(0040) galvanized 6" pipe running through the tank
(0050) Second tank venting and aeration at the rear
(0060) for FV (only with Can-Bus)
(0070) with galvanized 6" pipe routed through the tank
(0080) Float-type fill level indicator,
(0090) diameter: mm, front of tank for Can-Bus
(0100) 8" suction connection, reduced to 6" with hydraulic
(0110) slide valve and quick coupler front left
(0120) 6" mechanical slide valve with quick coupler
(0130) direct from the tank for suction
(0140) Position: wherever space permits
(0150) 6" hydraulic slide valve at rear with M-piece
(0160) (Preparation for splash plate/broad spreader)
(0170) - mechanical
(0180) - electric
(0190) - hydraulic
(0210) Dome 0 as service opening with handwheel
(0220) Low center of gravity: axles positioned above
(0230) the springs, wheel wells over both axles
(0240) Effective volume: approx. 21,000 liters
(0250) 14 ton Gigant air suspension, tandem axle,
(0260) forced steering by cable, 150 mm BPW axles,
(0270) Track width: 2,225 mm, RDR prep. AgroTurn
(0280) Wienhoff LevelTuner for tandem:
(0290) - automatic adjustment of air suspension pressure
(0300) according to load distribution
(0310) - driving stability program (RSP)
(0320) We require that the tractor
(0350) is equipped with a suitable air dryer.
(0360) Otherwise, brake system damage
(0370) cannot be excluded.
(0380) Wheels: 900/60 R 42 BKT Agrimax Force
(0390) Offset, tailored frame design,
(0410) Special frame construction for wheel width above 800
(0420) - for air suspension, 2x 900mm axle carriers
(0430) including 900/60 R42 BKT tires
(0440) Hydro-pneumatic suspended lower towing device
K80 with hydraulic support foot
(0460) K80 with large flange (4t.)
(0470) Dual-circuit air brake system with ALB
(0480) km/h equipment, with galvanized mudguards
(0490) - round steel edge
km/h TÜV approval certificate
(0510) - warning panels and position lights
(0520) - underrun protection with truck lighting
(0530) - complete LED lighting
(0540) LED work lights, front
(0550) Position:
(0560) - 1x front left side of tank
(0570) - 1x front right side of tank
(0580) Via WieTaCon/otherwise switch
(0590) LED rotating beacon
(0600) Complete lighting in LED
(0610) - lights in underrun protection
(0620) - outline marker lights on underrun protection
(0630) - active side marker lights left/right
(0650) LED work lamps, rear
(0660) Position:
(0670) - 1x rear left side of tank
(0680) - 1x rear right side of tank
(0690) Via WieTaCon/otherwise switch
(0700) LED work light on docking arm
(0710) Via WieTaCon/otherwise switch
(0720) Vogelsang RotoCut RCX 58-H
(0730) Cutting unit with automatic adjustment
(0740) mounted on large stone trap box
(0750) for item 001.07: mechanical slide valve under RotoCut
(0770) Vogelsang rotary lobe pump VX 186/390Q
L/min injection system with
(0790) hydrostat
(0800) hydraulically controlled rotary lobe pump via
Lajdey Et Raepfx Ahksa
RPM
(0820) gearbox
(0830) hydrostatic pump
(0840) regulated oil cooler with double-sided
(0850) 011.08.0070_oil cooler cover
(0860) Oil tank 80 liters
(0870) PTO shaft Bondioli Pavesi BG9
(0880) Pump painted in tank color
(0890) for item 001.08, pump mounted on side
(0910) Monitoring unit, pressure side
(0920) Pressure gauge on pressure side with
(0930) diaphragm gauge
(0940) Monitoring unit, suction side
(0950) Vacuum gauge

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.