Tehnologija gnojevke

Wienhoff 20.300 TW PROFI LINE

20,300 TW PROFI LINE
Ncjdpoyhr Nxofx Agyep
(0010) Wienhoff 20,300 TW PROFI LINE
(0011) Serial No.: 2497
(0020) Slurry tanker with internal coating and
(0030) external paint finish.
(0040) 6.20 m cylinder,
(0050) 6 mm wall thickness, 2.00 m tank diameter, 3
(0060) welded anti-surge baffles inside the tank and
(0070) manhole cover parallel to the rear
(0080) cover.
(0090) Tank with liquid displacement system
(0100) for drawbar load optimization.
(0110) Paint: RAL 6002 (Leaf Green).
(0120) Simple tank ventilation and aeration with
(0130) galvanized pipe running through the tank.
(0140) Electronic hydraulics - second tank ventilation and
(0150) aeration at the rear for field application.
(0160) Level indicator with 150 mm sight glass
(0170) at the front of the tank.
(0180) Level indicator, float diameter
mm at the front of the tank with CAN-Bus compatibility.
(0200) 8" suction port reduced to 6" with hydraulic
(0210) valve and quick coupler
(0220) Quick coupler with ball valve front left.
(0230) 6" mechanical valve with quick coupler
(0240) (directly on the tank for suction).
(0250) 14 t Gigant air suspension, tandem,
(0260) forced steering via cables, 150 BPW axles,
(0270) Track width: 2225 mm.
(0280) Low center of gravity: axles above
(0290) the springs, wheel arches over both axles.
(0300) Wienhoff "L&S" safety plus for
(0310) tandem:
(0320) - automatic adjustment of air suspension pressure
(0330) to load distribution
(0340) - Roll Stability Program (RSP)
(0350) - ABS system
(0360) - Drawbar load sensor
(0370) Wheels: 800/60 R 32 Vredestein Fl. Trac
(0380) Hydro-pneumatic lower hitch suspension
(0390) K80 with hydraulic support leg, K80 with large
(0400) flange (4 t).
(0410) Dual-circuit air brake with ALB
(0420) 40 km/h equipment with galvanized mudguards:
(0430) Galvanized mudguards with solid steel edge,
(0440) warning signs + marker lights
(0450) Rear underride guard with truck lighting
(0460) 40 km/h TÜV certificate
(0470) Additional LED lighting at the top of the tank.
(0480) 2 LED work lights,
(0490) Positioning:
(0510) 2x left/right
(0520) 2x rear
(0530) 1x at the suction arm
(0540) Active marker lights instead of
(0550) reflectors on the vehicle side, LED.
(0560) Large stone trap box with door
(0570) and prepared for RotaCut M
(0580) 10 Vogelsang rotary lobe pump VX 186/390Q -
L/min
(0610) Injection system with hydrostat
(0620) hydraulically regulated rotary lobe pump over
rpm.
(0640) PTO shaft,
(0650) - gearbox
(0660) - hydrostatic pump
(0670) - regulated oil cooler & oil tank
(0680) Drain cocks on the pump suction and
(0690) pressure side.
(0700) Wienhoff filling turbine 8-inch type 30
(0710) for docking arm.
(0720) With valve for electronic hydraulics.
(0730) Pressure side monitoring unit
(0740) Pressure gauge on the pressure side with
(0750) diaphragm gauge
(0760) Suction side monitoring unit
(0770) Vacuum gauge on the suction side
(0780) with diaphragm gauge.
(0790) With 8" inspection hatch.
(0800) 2" pressure relief valve at the vacuum
(0810) gauge.
(0820) PRESSURE FILTER BEFORE THE CONTROL BLOCK!
(0830) WieTaCon 14-1 / PTW basic function.
(0840) Aux version 6 / suction / docking arm
(0850) all / boom / application / headland / 2-axle joystick.
(0870) Additional control box for suction valve
(0880) lower left and right.
(0890) Additional control box for lifting gear up/down
(0900) rear left.
(0920) Prepared for Wienhoff N-Sensor
(0930) Hydraulic pipes instead of hoses routed
(0940) to the rear, coupling holder
(0950) at the rear side.
(096

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.